cross-linked denture base resins superacryl plus duracryl plus product presentation
TRANSCRIPT
Cross-linked denture base resins
SUPERACRYL PLUSSUPERACRYL PLUSDURACRYL PLUSDURACRYL PLUS
PRODUCT PRESENTATION
SUPERACRYL PLUSSUPERACRYL PLUS
I N D I C A T I O N S:I N D I C A T I O N S:
Heat-curing cross-linked denture base resin
Bases of complete dentures
Bases of partial dentures
Indirect rebasing
Manufacturing of orthodontic appliances
SUPERACRYL PLUSSUPERACRYL PLUS
A D V A N T A G E SA D V A N T A G E S
Reduced risk of breakage
High precision, excellent fit
Easily finished and polished
Different types of polymerization
Available in wide range of colours
Conforms to ISO 1567:2000
DDV V AANNTTAAGGEESS
SUPERACRYL PLUSSUPERACRYL PLUS Properties Properties
HIGH HIGH FLEXURAL STRENGTHFLEXURAL STRENGTHIIGGH H
SSTTRREENNGGTTHH
Flexural Strength MPa
96,91
78
98,2
65
0
20
40
60
80
100
120
SUPERACRYL PLUS
Product 1
Product 2
ISO 1567:2000
Reduced risk of breakage of denture
Water sorption μg/mm3
22,52 22 23
32
0
5
10
15
20
25
30
35
SUPERACRYL PLUSSUPERACRYL PLUSPropertiesProperties
LOW WATER SORPTIONLOW WATER SORPTIONOOWW
SSOORRPPTTIIOONN
SUPERACRYL PLUS
Product 1
Product 2
ISO 1567:2000
Colour stability of dentures
Water solubility μg/mm3
1,51,6
0,140,23
0
0,2
0,4
0,6
0,8
1
1,2
1,4
1,6
1,8
SUPERACRYL PLUSSUPERACRYL PLUSPropertiesProperties
LOW WATER SOLUBILITYLOW WATER SOLUBILITYOOWW
SSOOLLUUBBIILLII
TT YY
SUPERACRYL PLUS
Product 1
Product 2
ISO 1567:2000
Stability of properties – mechanical and visual
SUPERACRYL PLUSSUPERACRYL PLUSPropertiesProperties
High dimensional stability
High precision of dentures and excellent fit
High color stability
Very good adhesion to acrylic teeth
Denture does not change its colour in time
Low risk for teeth to fall out of the denture
Natural aesthetics of gingivalmargin and interdental papilae
SUPERACRYL PLUSSUPERACRYL PLUS
SUPERACRYL PLUSSUPERACRYL PLUS
WORKING TIMESWORKING TIMES
Dough time: 12 – 16 min
Plasticity interval: cca 10 min
Total working time: 25 min
SUPERACRYL PLUSSUPERACRYL PLUSPolymerizationPolymerization
STANDARD POLYMERIZATION:STANDARD POLYMERIZATION:1. Dip the cuvette in cold water
2. Heat to 70 °C within 30 minutes
3. Maintain the temperature for another 30 minutes
4. Increase the temperature to 100 °C within 30 minutes.
5. Maintain the temperature for another 30 minutes.
The total polymerization time is 2 hours.
70 70
100 100
21
0 30 60 90 120
Time
Tem
pera
ture
SUPERACRYL PLUSSUPERACRYL PLUSPolymerizationPolymerization
ACCELERATED POLYMERIZATIONACCELERATED POLYMERIZATION
1. Place the cuvette in cold water.
2. Heat to 100 °C.
3. Maintain the temperature for 45 minutes.
QUICK-BOILING POLYMERIZATIONQUICK-BOILING POLYMERIZATION
Suitable only for partial dentures of up to 4 teeth.
• Place the cuvette in boiling water (100 °C).
1. Maintain the temperature for 40 minutes.
SUPERACRYL PLUSSUPERACRYL PLUSPolymerizationPolymerization
POLYMERIZATION IN PRESSURE POLYMERIZATION IN PRESSURE POLYMERIZATOR:POLYMERIZATOR:
Polymerization directly on the model, without cuvette.
Suitable only for smaller partial dentures and denture repairs.
Pressure: 0,6 MPa
Temperature: 100 – 110 °C
Time: 10 – 15 minutes
DURACRYL PLUSDURACRYL PLUS
I N D I C A T I O N S:I N D I C A T I O N S:
REPAIRS OF DENTURES
EXTENSIONS OF DENTURES
MANUFACTURING OF IMMEDIATE DENTURES
Self-curing cross-linked denture base resin
DURACRYL PLUSDURACRYL PLUS
A D V A N T A G E SA D V A N T A G E S Easy preparation and workability
Convenient manipulation time
Easily finished and polished
Matches shades of SUPERACRYL® PLUS
Conforms to ISO 1567:2000
DDV V AANNTTAAGGEESS
Flexural Strength MPa
94,46
66,4 6960
0
10
20
30
40
50
60
70
80
90
100
DURACRYL PLUSDURACRYL PLUS Properties Properties
HIGH HIGH FLEXURAL STRENGTHFLEXURAL STRENGTHIIGGH H
SSTTRREENNGGTTHH
DURACRYL PLUS
Product 1
Product 2
ISO 1567:2000
Water sorption μm/mm3
22,92 21,225
32
0
5
10
15
20
25
30
35
DURACRYL PLUSDURACRYL PLUSPropertiesProperties
LOW LOW WATER SORPTIONWATER SORPTIONOOWW
SSOORRPPTTIIOONN
DURACRYL PLUS
Product 1
Product 2
ISO 1567:2000
DURACRYL PLUSDURACRYL PLUSPropertiesProperties
LOW LOW WATER SOLUBILITYWATER SOLUBILITYOOWW
SSOOLLUUBBIILLII
TT YY
DURACRYL PLUS
Product 1
Product 2
ISO 1567:2000
Water solubility μm/mm3
2,511,4 2
8
0
2
4
6
8
10
DURACRYL PLUSDURACRYL PLUSPropertiesProperties
High strength bonding to denture base polymers
High color stability
The repaired part is not visible and does not change its colour in time
High strength of repaired denture, minimizes risk of repeated breakage in the same place
DURACRYL PLUSDURACRYL PLUS
WORKING TIMESWORKING TIMES
Dough time: 2 – 4 min
Manipulation time: 3 – 5 min
Total working time: 7 min
PACKAGING
SUPERACRYL PLUSSUPERACRYL PLUSDURACRYL PLUSDURACRYL PLUS
Powder 500 g
Measuring devices
Liquid 250 g
SUPERACRYL PLUS
Available shadesAvailable shades
DURACRYL PLUS
O – transparent
X – with fibers
U, V, Z
O - transparent
U, V, Z