crimp specifications - discount hydraulic hose specifications remember to always measure your...

HYDRAULIC HOSE.com®

96 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Revised 3/17

Crimp Specifications

Hose Fitting Hose I.D.

Product Code

Crimp Diameter +/- .005" (0.13 mm)

Recommended Die Set Select the die for your crimper below

Micrometer Setting

SAE 100R1AT Hydraulic Hose (R1) D100 D165 D205

Braided Hose Fittings

crimp to knurl

1/4" R1-04 0.575" (14.60 mm) D100-12MM D100-12MM D200-12MM 2.60

3/8" R1-06 0.725" (18.41 mm) D100-16MM D100-16MM D200-16MM 2.41

1/2" R1-08 0.845" (21.46 mm) D100-19MM D100-19MM D200-19MM 2.46

5/8" R1-10 0.995" (25.27 mm) D100-22MM D100-22MM D200-22MM 3.27

3/4" R1-12 1.100" (27.90 mm) D100-25MM D100-25MM D200-25MM 2.90

1" R1-16 1.430" (36.30 mm) D100-35MM D100-35MM D200-35MM 1.30

1-1/4" R1-20 1.830" (46.50 mm) N/A D100-43MM D200-43MM 3.50

W Series Bite-To-The Wire

Hose Fittingscrimp full shell

1/4" R1-04 0.655" (16.65 mm) D100-16MM D100-16MM D200-16MM 0.65

3/8" R1-06 0.790" (20.05 mm) D100-19MM D100-19MM D200-19MM 1.05

1/2" R1-08 0.920" (23.36 mm) D100-22MM D100-22MM D200-22MM 1.36

3/4" R1-12 1.215" (30.86 mm) D100-28MM D100-28MM D200-28MM 2.86

1" R1-16 1.625" (41.30 mm) D100-39MM D100-39MM D200-39MM 2.30

1-1/4" R1-20 1.965" (49.91 mm) N/A D100-47MM D200-47MM 2.91

SAE 100R2AT Hydraulic Hose (R2) D100 D165 D205


crimp to knurl

1/4" R2-04 0.645" (16.38 mm) D100-16MM D100-16MM D200-16MM 0.38

3/8" R2-06 0.800" (20.32 mm) D100-19MM D100-19MM D200-19MM 1.32

1/2" R2-08 0.910" (23.10 mm) D100-22MM D100-22MM D200-22MM 1.10

5/8" R2-10 1.030" (26.16 mm) D100-25MM D100-25MM D200-25MM 1.16

3/4" R2-12 1.190" (30.25 mm) D100-28MM D100-28MM D200-28MM 2.25

1" R2-16 1.507" (38.27 mm) D100-35MM D100-35MM D200-35MM 2.27

1-1/4" R2-20 1.908" (48.46 mm) N/A D100-47MM D200-47MM 1.46



1/4" R2-04 0.695" (17.65 mm) D100-16MM D100-16MM D200-16MM 1.65

3/8" R2-06 0.845" (21.46 mm) D100-19MM D100-19MM D200-19MM 2.48

1/2" R2-08 0.970" (24.63 mm) D100-22MM D100-22MM D200-22MM 2.63

5/8" R2-10 1.200" (30.48 mm) D100-28MM D100-28MM D200-28MM 2.48

3/4" R2-12 1.285" (32.65 mm) D100-31MM D100-31MM D200-31MM 1.65

1" R2-16 1.665" (42.30 mm) D100-41MM D100-41MM D200-41MM 1.30

1-1/4" R2-20 2.060" (52.32 mm) N/A D100-51MM D200-51MM 1.32

1-1/2" R2-24 2.400" (60.95 mm) N/A N/A D200DA-60MM* 0.95

2" R2-32 2.870" (72.90 mm) N/A N/A D200DA-72MM* 0.90

* D200DA Double-Angle Die Sets require double-angle tooling (sold separately).

D100 D165 D205See pg. 154 for our hydraulic hose crimpers.


Revised 3/17 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Page 197

See pg. 154 for our hydraulic hose crimpers.



Product Code



Micrometer Setting

SAE 100R3 General Purpose/Hydraulic Hose (R3) D100 D165 D205


crimp to knurl

1/4" R3-04 0.615" (15.60 mm) D100-14MM D100-14MM D200-14MM 1.60

3/8" R3-06 0.790" (20.05 mm) D100-19MM D100-19MM D200-19MM 1.05

1/2" R3-08 0.950" (24.15 mm) D100-22MM D100-22MM D200-22MM 2.15

3/4" R3-12 1.240" (31.50 mm) D100-31MM D100-31MM D200-31MM 0.50

1" R3-16 1.520" (36.60 mm) D100-35MM D100-35MM D200-35MM 1.60

SAE 100R4 Suction and Return Hose (R4) D100 D165 D205


crimp to knurl

3/4" R4-12 1.233" (31.30 mm) D100-31MM D100-31MM D200-31MM 0.30

1" R4-16 1.466" (37.25 mm) D100-35MM D100-35MM D200-35MM 2.25

1-1/4" R4-20 1.780" (45.20 mm) N/A D100-43MM D200-43MM 2.20

Two-Piece Suction Hose

Fittingscrimp full shell

3/4" R4-12 1.280" (32.50 mm) D100-31MM D100-31MM D200-31MM 1.50

1" R4-16 1.540" (39.10 mm) D100-39MM D100-39MM D200-39MM 0.10

1-1/4" R4-20 1.825" (46.35 mm) N/A D100-43MM D200-43MM 3.35

1-1/2" R4-24 2.040" (51.80 mm) N/A N/A D200-51MM 0.80

2" R4-32 2.480" (63.00 mm) N/A N/A D200DA-62MM* 1.00

SAE 100R5 General Purpose/Truck Hose (R5) D100 D165 D205

R5 Series Truck Hose Fittings

crimp to knurl

3/16" R5-04 0.535" (13.60 mm) D100-12MM D100-12MM D200-12MM 1.60

1/4" R5-05 0.660" (16.75 mm) D100-16MM D100-16MM D200-16MM 0.75

5/16" R5-06 0.725" (18.40 mm) D100-16MM D100-16MM D200-16MM 2.40

13/32" R5-08 0.830" (21.10 mm) D100-19MM D100-19MM D200-19MM 2.10

1/2" R5-10 0.915" (23.30 mm) D100-22MM D100-22MM D200-22MM 1.30

5/8" R5-12 1.035" (26.30 mm) D100-25MM D100-25MM D200-25MM 1.30

7/8" R5-16 1.240" (31.50 mm) D100-29MM D100-29MM D200-29MM 2.50

1-1/8" R5-20 1.535" (38.95 mm) D100-35MM D100-35MM D200-35MM 3.95

1-3/8" R5-24 1.730" (43.95 mm) N/A D100-43MM D200-43MM 0.95

1-13/16" R5-32 2.225" (56.50 mm) N/A N/A D200DA-55MM* 1.50

SAE 100R7 Thermoplastic Hose (R7BK/R7NC) D100 D165 D205

3 Series Thermoplastic Hose Fittingscrimp to knurl

1/8" R7-02 0.358" (09.10 mm) D100-08MM D100-08MM D200-08MM 1.10

3/16" R7-03 0.478" (12.14 mm) D100-10MM D100-10MM D200-10MM 2.14

1/4" R7-04 0.555" (14.10 mm) D100-12MM D100-12MM D200-12MM 2.10

5/16" R7-05 0.630" (16.00 mm) D100-14MM D100-14MM D200-14MM 2.00

3/8" R7-06 0.675" (17.15 mm) D100-16MM D100-16MM D200-16MM 2.28

1/2" R7-08 0.825" (20.96 mm) D100-19MM D100-19MM D200-19MM 2.59


crimp to knurl

3/16" R7-03 0.495" (12.57 mm) D100-10MM D100-10MM D200-10MM 2.57

1/4" R7-04 0.580" (14.73 mm) D100-12MM D100-12MM D200-12MM 2.73

5/16" R7-05 0.630" (16.00 mm) D100-14MM D100-14MM D200-14MM 2.00

3/8" R7-06 0.720" (18.28 mm) D100-16MM D100-16MM D200-16MM 4.28

1/2" R7-08 0.850" (21.59 mm) D100-19MM D100-19MM D200-19MM 2.59

3/4" R7-12 1.120" (28.44 mm) D100-28MM D100-28MM D200-28MM 0.44

1" R7-16 1.400" (35.56 mm) D100-35MM D100-35MM D200-35MM 0.56



Page 198 Customer Service: 800-535-1302 (1-215-744-2828 outside the USA) Revised 3/17


Product Code



Micrometer Setting

SAE 100R8 Thermoplastic Hose (R8BK/R8NC) D100 D165 D205

3 Series Thermoplastic Hose Fittingscrimp to knurl

3/16" R8-03 0.358" (12.14 mm) D100-10MM D100-10MM D200-10MM 2.14

1/4" R8-04 0.555" (14.10 mm) D100-12MM D100-12MM D200-12MM 2.10

5/16" R8-05 0.630" (16.00 mm) D100-14MM D100-14MM D200-14MM 2.00

3/8" R8-06 0.675" (17.15 mm) D100-16MM D100-16MM D200-16MM 1.15

1/2" R8-08 0.825" (20.96 mm) D100-19MM D100-19MM D200-19MM 1.96


crimp to knurl

3/16" R8-03 0.485" (12.32 mm) D100-12MM D100-12MM D200-12MM 0.32

1/4" R8-04 0.580" (14.73 mm) D100-12MM D100-12MM D200-12MM 2.73

3/8" R8-06 0.725" (18.41 mm) D100-16MM D100-16MM D200-16MM 2.41

1/2" R8-08 0.830" (21.08 mm) D100-19MM D100-19MM D200-19MM 2.08

Pressure Washer Hose (PW/PWB) D100 D165 D205


crimp to knurl

1/4"PW-04

PWB-040.560" (14.22 mm) D100-14MM D100-14MM D200-14MM 0.22

3/8"PW-06

PWB-060.750" (19.05 mm) D100-16MM D100-16MM D200-16MM 3.05



Remember to always measure your crimps!

Item: 93293-3VGA

Braided Vs. W-Series Fittings Our braided hose fittings are made to interchange with most Weatherhead "U' series fittings, and attach by crimping to the outer rubber jacket of the hose. Our W-Series bite-to-the wire fittings are designed for superior performace by biting into the steel reinforced wire of the hydraulic hoses. Finished Braided Crimp

Finished W-Series Crimp



Finished W-Series Crimp


Product Code



Micrometer Setting

SAE 100R12 Four-Wire Hydraulic Hose (R12) D100 D165 D205



3/8" R12-06 0.870" (22.10 mm) D100-22MM D100-22MM D200-22MM 0.10

1/2" R12-08 1.010" (25.65 mm) D100-25MM D100-25MM D200-25MM 0.65

3/4" R12-12 1.320" (33.55 mm) D100-31MM D100-31MM D200-31MM 2.55

1" R12-16 1.630" (41.40 mm) D100-39MM D100-39MM D200-39MM 2.40

1-1/4" R12-20 2.045" (51.95 mm) N/A D100-51MM D200-51MM 0.95

1-1/2" R12-24 2.375" (60.35 mm) N/A N/A D200DA-60MM* 0.35

2" R12-32 2.885" (73.30 mm) N/A N/A D200DA-72MM* 1.30

SAE 100R13 Hydraulic Hose (R13) D100 D165 D205



3/4" R13-12 1.335" (33.90 mm) D100-31MM D100-31MM D200-31MM 2.90

1" R13-16 1.645" (41.80 mm) D100-39MM D100-39MM D200-39MM 2.80

JJ Series Skived Hose

Fittingsskive before

assembly, crimp full shell

1-1/4" R13-20 2.050" (52.05 mm) N/A D100-51MM D200-51MM 1.05

1-1/2" R13-24 2.320" (58.95 mm) N/A N/A D200DA-58MM* 0.95

2" R13-32 2.980" (75.70 mm) N/A N/A D200DA-75MM* 0.70

SAE 100R14A PTFE Hose (R14) D100 D165 D205

T Series PTFE Hose Fittings

crimp to knurl

3/16" R14-04 0.395" (10.05 mm) D100-10MM D100-10MM D200-10MM 0.05

1/4" R14-05 0.430" (10.90 mm) D100-10MM D100-10MM D200-10MM 0.90

5/16" R14-06 0.490" (12.45 mm) D100-12MM D100-12MM D200-12MM 0.45

3/8" R14-07 0.565" (14.35 mm) D100-14MM D100-14MM D200-14MM 0.35

1/2" R14-10 0.695" (17.65 mm) D100-16MM D100-16MM D200-16MM 1.65

3/4" R14-14 0.995" (25.25 mm) D100-25MM D100-25MM D200-25MM 0.25

1" R14-18 1.225" (31.10 mm) D100-31MM D100-31MM D200-31MM 0.10



crimp to knurl

1/4" R16-04 0.615" (15.60 mm) D100-14MM D100-14MM D200-14MM 1.60

3/8" R16-06 0.740" (18.79 mm) D100-16MM D100-16MM D200-16MM 2.79

1/2" R16-08 0.860" (21.84 mm) D100-19MM D100-19MM D200-19MM 2.84

5/8" R16-10 1.000" (25.40 mm) D100-25MM D100-25MM D200-25MM 0.40

3/4" R16-12 1.130" (28.70 mm) D100-28MM D100-28MM D200-28MM 0.70

1" R16-16 1.425" (36.20 mm) D100-35MM D100-35MM D200-35MM 1.20



1/4" R16-04 0.670" (17.01 mm) D100-16MM D100-16MM D200-16MM 1.01

3/8" R16-06 0.815" (20.70 mm) D100-19MM D100-19MM D200-19MM 1.70

1/2" R16-08 0.945" (24.00 mm) D100-22MM D100-22MM D200-22MM 2.00

5/8" R16-10 1.178" (29.92 mm) D100-28MM D100-28MM D200-28MM 1.92

3/4" R16-12 1.230" (31.25 mm) D100-31MM D100-31MM D200-31MM 0.25

1" R16-16 1.555" (39.50 mm) D100-37MM D100-37MM D200-37MM 2.50






Product Code



Micrometer Setting



crimp to knurl

1/4" R17-04 0.565" (14.35 mm) D100-14MM D100-14MM D200-14MM 0.35

3/8" R17-06 0.705" (17.90 mm) D100-16MM D100-16MM D200-16MM 1.90

1/2" R17-08 0.840" (21.35 mm) D100-19MM D100-19MM D200-19MM 2.35

5/8" R17-10 0.995" (25.27 mm) D100-25MM D100-25MM D200-25MM 0.27

3/4" R17-12 1.140" (28.95 mm) D100-28MM D100-28MM D200-28MM 0.95



1/4" R17-04 0.625" (15.90 mm) D100-14MM D100-14MM D200-14MM 1.90

3/8" R17-06 0.779" (19.80 mm) D100-19MM D100-19MM D200-19MM 0.80

1/2" R17-08 0.950" (24.10 mm) D100-22MM D100-22MM D200-22MM 2.10

5/8" R17-10 1.170" (29.70 mm) D100-28MM D100-28MM D200-28MM 1.70

3/4" R17-12 1.275" (32.40 mm) D100-31MM D100-31MM D200-31MM 1.40

1" R17-16 1.564" (39.75 mm) D100-37MM D100-37MM D200-37MM 2.75

Hydraulax™ TOUGH Hydraulic Hose (HT) D100 D165 D205


crimp to knurl

1/4" HT-04 0.600" (15.25 mm) D100-14MM D100-14MM D200-14MM 1.25

3/8" HT-06 0.750" (19.05 mm) D100-16MM D100-16MM D200-16MM 3.05

1/2" HT-08 0.860" (21.85 mm) D100-19MM D100-19MM D200-19MM 2.85

5/8" HT-10 0.985" (25.01 mm) D100-22MM D100-22MM D200-22MM 3.01

3/4" HT-12 1.151" (29.25 mm) D100-28MM D100-28MM D200-28MM 1.25



1/4" HT-04 0.660" (16.75 mm) D100-16MM D100-16MM D200-16MM 0.75

3/8" HT-06 0.800" (20.30 mm) D100-19MM D100-19MM D200-19MM 1.30

1/2" HT-08 0.950" (24.15 mm) D100-22MM D100-22MM D200-22MM 2.15

5/8" HT-10 1.170" (29.70 mm) D100-28MM D100-28MM D200-28MM 1.70

3/4" HT-12 1.240" (31.50 mm) D100-31MM D100-31MM D200-31MM 0.50

1" HT-16 1.545" (39.25 mm) D100-37MM D100-37MM D200-37MM 2.25

10,000 PSI Hydraulic Jack Hose (HJK) D100 D165 D205Braided Hose

Fittingscrimp to knurl

1/4" HJK-04 0.634" (16.10 mm) D100-14MM D100-14MM D200-14MM 2.10

3/8" HJK-06 0.785" (19.95 mm) D100-19MM D100-19MM D200-19MM 0.95

EN 856 4SH Hydraulic Hose (4SH) D100 D165 D205



3/4" 4SH-12 1.320" (33.55 mm) D100-31MM D100-31MM D200-31MM 2.55

1" 4SH-16 1.630" (41.40 mm) D100-39MM D100-39MM D200-39MM 2.40

1-1/4" 4SH-20 1.990" (50.55 mm) N/A D100-47MM D200-47MM 3.55

1-1/2" 4SH-24 2.390" (60.70 mm) N/A N/A D200DA-60MM* 0.70

JJ Series Skived Hose

Fittingsskive before

assembly, crimp full shell

1-1/4" 4SH-20 1.943" (49.35 mm) N/A D100-47MM D200-47MM 2.35

1-1/2" 4SH-24 2.195" (55.75 mm) N/A N/A D200DA-55MM* 0.75

2" 4SH-32 2.840" (72.15 mm) N/A N/A D200DA-72MM* 0.15





Dies can be found on page 154. Hose Cutting Saws are located on page 153.


Product Code



Micrometer Setting

SAE J2064 Type C Class II A/C Refrigerant Barrier Hose (BH) D100 D165 D205

A/C Barrier Hose Fittings

crimp to knurl

5/16" BH-06 0.684" (17.35 mm) D100-16MM D100-16MM D200-16MM 1.35

13/32" BH-08 0.785" (19.95 mm) D100-19MM D100-19MM D200-19MM 0.95

1/2" BH-10 0.905" (23.00 mm) D100-22MM D100-22MM D200-22MM 1.00

5/8" BH-12 1.050" (26.65 mm) D100-25MM D100-25MM D200-25MM 1.65


Ask about our helpful and colorful wall charts for your shop or office!


R1 SAE 100R1 AT 1-Wire Hydraulic Hose

Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R1 AT specifications.

Item Number

Inside Diameter

Outside Diameter

Max. Working Pressure (psi)

Min. Burst Pressure (psi)

Minimum Bend Radius

R1-04 1/4" .53" 2,750 11,000 4"

R1-06 3/8" .69" 2,250 9,000 5"

R1-08 1/2" .82" 2,000 8,000 7"

R1-10 5/8" .94" 1,500 6,000 8"

R1-12 3/4" 1.10" 1,250 5,000 9½"

R1-16 1" 1.41" 1,000 4,000 12"

Use with Braided Hose Fittings, W-Series Hose Fittings, or SAE 100R1 AT Field-Attachable Hose Fittings.

R2 SAE 100R2 AT 2-Wire Hydraulic Hose

Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R2 AT specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R2-04 1/4" 0.59" 5,800 psi 23,200 psi 4"

R2-06 3/8" 0.75" 4,785 psi 19,140 psi 5"

R2-08 1/2" 0.88" 4,000 psi 16,000 psi 7"

R2-10 5/8" 0.98" 3,625 psi 14,500 psi 8"

R2-12 3/4" 1.16" 3,120 psi 12,480 psi 9.5"

R2-16 1" 1.50" 2,395 psi 9,580 psi 12"

R2-20 1-1/4" 1.87" 1,815 psi 7,260 psi 16.5"

R2-24 1-1/2" 2.17" 1,305 psi 5,220 psi 20"

R2-32 2" 2.66" 1,160 psi 4,640 psi 25"

Use with Braided Hose Fittings, W-Series Hose Fittings, or SAE 100R2 AT Field-Attachable Hose Fittings.

R16 SAE 100R16 2-Wire Hydraulic Hose

Half-bend radius. Same pressure rating as SAE 100R2.Meets all SAE 100R16 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R16-04 1/4" 0.55" 5,800 psi 23,200 psi 2"

R16-06 3/8" 0.67" 4,780 psi 19,120 psi 2.5"

R16-08 1/2" 0.81" 3,980 psi 15,920 psi 3.5"

R16-10 5/8" 0.93" 3,620 psi 14,480 psi 4"

R16-12 3/4" 1.07" 3,110 psi 12,440 psi 4.75"

R16-16 1" 1.37" 2,390 psi 9,560 psi 6"

Use with Braided Hose Fittings or W-Series Hose Fittings.

R17 SAE100R17 Constant-Pressure Hydraulic Hose

Half-bend radius. All sizes are rated for 3,000 psi maximum working pressure.Meets all SAE 100R17 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R17-04* 1/4" 0.50" 3,000 12,000 2"

R17-06* 3/8" 0.66" 3,000 12,000 2½"

R17-08 1/2" 0.80" 3,000 12,000 3½"

R17-10 5/8" 1.00" 3,000 12,000 4"

R17-12 3/4" 1.12" 3,000 12,000 4¾"

R17-16 1" 1.48" 3,000 12,000 6"

Use with Braided Hose Fittings (up to 3/4" hose I.D.) or W-Series Hose Fittings (all sizes). *One-Wire spiral braid in sizes -04 and -06

HJK 10,000 psi Hydraulic Jack Hose

Use only in constant pressure (no impulse) applications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

HJK-04 1/4" 0.59" 10,000 20,000 4"

HJK-06 3/8" 0.75" 10,000 20,000 7"

Use with Braided Hose Fittings.

HT Tough-Cover Hydraulic Hose

Abrasion-, ozone- and weather-resistant cover is ideal for mobile hydraulics in harsh environments.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

HT-04 1/4" 0.53" 6,525 26,100 1.8"

HT-06 3/8" 0.68" 5,585 22,340 2.8"

HT-08 1/2" 0.81" 5,000 20,000 3.5"

HT-10 5/8" 0.93" 4,205 16,820 5.1"

HT-12 3/4" 1.09" 4,060 16,240 6.3"

HT-16 1" 1.40" 2,900 11,600 8.27"

Use with Braided Hose Fittings or W-Series Hose Fittings.


Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R12 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R12-06 3/8" 0.80" 4,000 16,000 5"

R12-08 1/2" 0.94" 4,000 16,000 7"

R12-12 3/4" 1.21" 4,000 16,000 9½"

R12-16 1" 1.50" 4,000 16,000 12"

R12-20 1¼" 1.85" 3,000 12,000 16½"

R12-24 1½" 2.11" 2,500 10,000 20"

R12-32 2" 2.63" 2,500 10,000 25"

Use with W-Series Hose Fittings.

4SH DIN EN 856 4SH 4-Wire Hydraulic Hose

Six-wire performance with no-skive fittings. Meets all DIN 20023 4SH and DIN EN 856 4SH specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

4SH-12 3/4" 1.21" 6,095 24,380 9½"

4SH-16 1" 1.50" 5,515 22,060 12"

4SH-20 1¼" 1.85" 5,000 20,000 16½"

4SH-24 1½" 2.11" 4,200 16,800 20"

4SH-32 2" 2.63" 3,625 14,500 25"

Use with W-Series Hose Fittings (up to 1-1/2" hose I.D.) or JJ-Series Hose Fittings (1-1/4" to 2" hose I.D.).


Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R13 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R13-12* 3/4" 1.26" 5,000 20,000 9½"

R13-16* 1" 1.54" 5,000 20,000 12"

R13-20 1¼" 1.96" 5,000 20,000 16½"

R13-24 1½" 2.26" 5,000 20,000 20"

R13-32 2" 2.8" 5,000 20,000 25"

Use with JJ-Series Hose Fittings (skiving is required). *Four-wire spiral braid in sizes -12 and -16

R4 SAE 100R4 Suction and Return Hose

Suitable for vacuum service up to 25"/hg.Meets all SAE 100R4 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R4-12 3/4" 1.24" 300 1,200 5"

R4-16 1" 1.53" 250 1,000 6"

R4-20 1¼" 1.78" 200 800 8"

R4-24 1½" 2.07" 150 600 10"

R4-32 2" 2.54" 100 400 12"

Use with Suction Hose Fittings or Steel Hose Barbs. Attach barbs with Heavy Duty T-Bolt Hose Clamps.

1145 Heavy-Duty Air HoseRecommended for air and water applications where petroleum contact is limited.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

1145-04400 1/4" 0.63" 300 1,200 3"1145-05400 5/16" 0.63" 300 1,200 3¼"1145-06400 3/8" 0.72" 300 1,200 3¼"1145-08400 1/2" 0.88" 300 1,200 4½"1145-10400 5/8" 1.00" 300 1,200 5¼"1145-12400 3/4" 1.16" 300 1,200 5¾"1145-16300 1" 1.44" 200 800 7¾"1145-20200 1¼" 1.78" 200 800 8¾"1145-24200 1½" 2.03" 200 800 10½"1145-32200 2" 2.50" 200 800 14"

Use with Brass Hose Barbs. Attach with hose clamps or ferrules.

K11 PVC Multipurpose Air and Water Hose

Recommended for air, water, and mild water-soluble chemicals. Available in red, blue, gray and yellow.

Item Number

Inside Diameter

Outside Diameter

Max. Working Pressure (psi) at 70° Fahrenheit

Max. Working Pressure (psi) at 122° Fahrenheit

K1134-04 1/4" 0.50" 300 180

K1134-05 5/16" 0.63" 300 180

K1134-06 3/8" 0.63" 300 180

K1134-08 1/2" 0.81" 300 180

K1134-10 5/8" 0.91" 300 180

K1134-12 3/4" 1.13" 300 180

K1134-16 1" 1.41" 300 180

Use with Brass Hose Barbs or Nylon Hose Barbs. Attach with hose clamps or ferrules.

3384 Push-Lock General Purpose Hose

Recommended for gasoline, fuel and lubricating oils, air and water. Available in black, blue, gray, red and yellow.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

3384-04 1/4" 0.50" 250 1,000 3"

3384-06 3/8" 0.62" 250 1,000 3"

3384-08 1/2" 0.75" 250 1,000 5"

3384-10 5/8" 0.91" 250 1,000 6"

3384-12 3/4" 1.03" 250 1,000 7"

No hose clamps or ferrules needed when used with Push-Lock Hose Barbs.

R3 SAE 100R3 General Purpose Hose

Recommended for hydraulics, fuel, lubricating oils, gasoline, air and water. Not approved for air brake.Meets all SAE 100R3 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R3-04 1/4" 0.57" 1,250 5,000 3"

R3-06 3/8" 0.75" 1,125 4,500 4"

R3-08 1/2" 0.94" 1,000 4,000 5"

R3-12 3/4" 1.25" 750 3,000 6"

R3-16 1" 1.50" 565 2,250 8"


R6 SAE 100R6 General Purpose Hose

Recommended for gasoline, fuel, lubricating oils, air and water. Not approved for air brake applications.Meets all SAE 100R6 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R6-04 1/4" .50" 400 1,600 2½"

R6-05 5/16" .57" 400 1,600 3"

R6-06 3/8" .63" 400 1,600 3"

Use with SAE 100R6 Field-Attachable Fittings.

R5 SAE 100R5 1-Wire Braided Cover Hose

Recommended for hydraulics, air, air brake, gasoline, fuel, and lubricating oils. SAE 100R5 is not Coast Guard approved for fuel lines on pleasure craft. Meets all applicable SAE 100R5, DOT and SAE J1402 specifications (7/8" and larger are not approved for air brake).

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R5-04 3/16" 0.51" 3,000 12,000 3"

R5-05 1/4" 0.57" 3,000 12,000 3½"

R5-06 5/16" 0.67" 2,250 9,000 4"

R5-08 13/32" 0.76" 2,000 8,000 4½"

R5-10 1/2" 0.92" 1,750 7,000 5½"

R5-12 5/8" 1.07" 1,500 6,000 6½"

R5-16 7/8" 1.23" 800 3,200 7½"

R5-20 11/8" 1.50" 625 2,500 9"

R5-24 13/8" 1.75" 500 2,000 10½"

R5-32 113/16" 2.10" 350 1,400 13¼"

Use with Truck Hose Fittings or R5 Field-Attachable Hose Fittings.

4821 SAE J1402A Air Brake Hose

Recommended for air brake applications.Meets all SAE J1402A and DOT specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

482106 3/8" 0.75" 225 900 3.5"

482108 1/2" 0.88" 225 900 4"

Use with Field-Attachable Air Brake Hose Fittings.

30R7 SAE 30R7 Fuel Line Hose

Recommended for low pressure / high temperature fuel for passenger car, light truck and small engine applica-tions. Not intended for fuel injection applications. Meets all requirements of SAE 30R7. 30R7 is not Coast Guard approved for marine applications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

30R7-03 3/16" .41" 50 250 2"

30R7-04 1/4" .50" 50 250 2½"

30R7-05 5/16" .57" 50 250 2¾"

30R7-06 3/8" .63" 50 250 3"

Use with SAE 30R7 Fuel Hose Barbs.

BH Air Conditioning/Refrigerant Hose

Recommended for use with R12 and R134a refrigerant. Ideal for heavy-duty truck use as well as industrial and automotive applications.

Meets all requirements for SAE J2064 Type C Class II.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

BH-06 5/16" .75" 350 2,000 4"

BH-08 13/32" .91" 350 2,000 4¾"

BH-10 1/2" 1.00" 350 2,000 5½"

BH-12 5/8" 1.13" 350 1,750 6½"

Use with Air Conditioning Hose Fittings.

Pressure Washer Hose

Recommened for pressure washer applications. Avail-able in Black (PW) and non-marking Blue cover (PWB)

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

PW-06 3/8" .65" 4,000 16,000 3"

PWB-06 3/8" .65" 4,000 16,000 3"


R7 SAE 100R7 Nylon/ Thermoplastic Hose

Single-wire performance without the wire. Smooth cover. Recommended for hydraulic lines, lubrication, medium pressure gas and solvent. Available in black or nonconductive orange.

1/4", 3/8" and 1/2" also available in a twin hose.Meets all SAE 100R7 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R7-02 1/8" 0.33" 2,500 10,000 0.25"R7-03 3/16" 0.41" 3,000 12,000 0.75"R7-04 1/4" 0.51" 2,750 11,000 1.25"R7-05 5/16" 0.59" 2,500 10,000 1.75"R7-06 3/8" 0.65" 2,250 9,000 2.00"R7-08 1/2" 0.81" 2,000 8,000 3.00"

Use with 3-Series Thermoplastic Hose Fittings or R7 Field-Attachable Hose Fittings.

R8 SAE 100R8 Nylon/ Thermoplastic Hose

Double-wire performance without the wire. Smooth cover. Recommended for hydraulic lines, lubrication, medium pressure gas and solvent. Available in black or nonconductive orange. Meets all SAE 100R8 specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R8-04 1/4" 0.51" 5,000 20,000 2"

R8-06 3/8" 0.65" 4,000 16,000 2½"

R8-08 1/2" 0.81" 3,500 14,000 4"

Use with 3-Series Thermoplastic Hose Fittings or R7 Field-Attachable Hose Fittings.

R14 SAE 100R14A Teflon®/PTFE Hose

Recommended for steam, solvents, fuels, hydraulic fluids, most chemicals and acids.Meets all SAE 100R14A specifications.

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

R14-04 3/16" .30" 3,000 12,000 2"

R14-05 1/4" .38" 3,000 12,000 3"

R14-06 5/16" .44" 2,500 10,000 4"

R14-07 3/8" .52" 2,000 8,000 5"

R14-08 13/32" .54" 2,000 8,000 5"

R14-10 1/2" .63" 1,500 6,000 6½"

R14-12 5/8" .76" 1,200 4,800 7½"

R14-14 3/4" .89" 1,000 4,000 8½"

R14-16 7/8" 1.03" 1,000 4,000 9"

R14-18 1" 1.22" 1,000 4,000 12"

Use with T-Series Teflon Hose Fittings or SAE 100R14A Field-Attachable Hose Fittings.

Nylon Air Brake Tubing

Recommended for steam, solvents, fuels, hydraulic fluids, most chemicals and acids. Available in 9 colors shown below.Meets all requirements for SAE J844 Type A & B and DOT FMVSS 571.106

Item Number

Inside Diameter

Outside Diameter



Minimum Bend Radius

NT100-02BK 1/8" .023" 150 psi 1,000 psi 3/8"

NT100-04BK 1/4" .040" 150 psi 1,200 psi 1"

NT100-05BK 5/16" .040" 150 psi 1,000 psi 1-1/4"

NT100-06BK 3/8" .062" 150 psi 1,400 psi 1-1/2"

NT100-08BK 1/2" .062" 150 psi 950 psi 2"

NT100-10BK 5/8" .092" 150 psi 900 psi 2-1/2"

NT100-12BK 3/4" .092" 150 psi 800 psi 3"

Use with Air Brake Fittings or Push-In Air Brake Fittings.

HA Hose Armor Protective Steel Coil

BE Standard Support Clamp for Hose, Tubing or Pipe

BE-T Twin Support Clamp for Hose, Tubing or Pipe

COV Steel Hose Strap with Protective Rubber Cover

HHP112 Flexible Neoprene Protective Hose Wrap

BE-H Heavy-Duty Support Clamp for Hose, Tubing or Pipe

Hose Protection and Support ClampsNPS Nylon Protective Sleeve

SG Steel Wire Protective Coil

HB Hose-Bend Restrictors

Fire Jacket Protective Wrap for temperatures up to 500° F

Fire Jacket Protective Sleeve for temperatures up to 500° F

HOSE, TUBING AND ACCESSORIESHYDRAULAPRODUC T S

©2007-2015 Hydraulic Fittings Company, Inc. Printed in the U.S.A.

NFSGX Spiral Guard UV-Resistant Plastic Protective Coil

600 Series ISO 7241-1 Series AInterchanges with Parker 6600 Series

4100 Series Wet Line CouplingInterchanges with Parker 6100 Series

700 Series ISO 7241-1 Series BInterchanges with Parker 60 Series

Hydraulic Quick Disconnect CouplersAG Series ISO 5675 AgriculturalInterchanges with Parker/Pioneer 4000 Series

T Series Screw-Together High PressureInterchanges with Parker 3000 Series and Enerpac C604 (3/8" only)

HT Series ISO 16028 Flush-FaceInterchanges with Parker FEM Series (1/2", 5/8" and 3/4") and FF Series (3/8" only).

HYDRAULIC (with petroleum or water-based fluids) GENERAL PURPOSE TRUCK/FLEET SPECIAL APPLICATIONS

Fluid Conducting Swivel Joints18S Series Pressure Balanced Parallel Plane Swivels

9S Series Pressure Balanced 90° Swivels

9SS Series Dual-Plane 90° Swivels

Full-time 360° rotating swivel joints for fluid power applications up to 3,000 psi working pressure.

S Series Full Flow In-Line Swivels

HYDRAULAPRODUC T S

2 LOCATIONS TO SERVE YOU 5606 Tulip St Philadelphia, PA 19124215-744-2828

6360 Basehore RdMechanicsburg, PA 17050 717-691-3171

HOSE ASSEMBLY TOOLSHydraulax Products has a full selection of tools for crimping, swaging, and cutting hose.

Always measure your crimpsPermanently-attached hose fittings must be crimped to manufacturer specifications. For complete crimp specification data, please see our catalog or visit www.hydraulax.com.

93293-3VGA 6" Digital Caliper

For additional hose information, including temperature range, outside diameter and reel lengths, please see our catalog or visit www.hydraulax.com

NT

PW

FPX (W) NPSM Female Pipe Swivel

FKOMX (W) Komatsu JIS 30° (Metric Thread) Female Swivel

3-00100 NPTF Male Pipe Rigid

3-00140 NPTF Male Pipe Swivel

3-00240 NPSM Female Pipe Swivel

3-00400 O-Ring Face Seal (ORFS) Female Swivel

3-00470 O-Ring Face Seal (ORFS) Female Swivel 90° Elbow

Braided Hose Fittings for 1-Wire and 2-Wire Hoses

MJ JIC 37° Male Rigid Also available in Stainless Steel

FJX JIC 37° Female Swivel Also available in Stainless Steel

FJXT JIC 37° Female Swivel Long

MP NPTF Male Pipe Rigid Also available in Stainless Steel

MPX NPTF Male Pipe Swivel

FP NPTF Female Pipe Rigid

FPX NPSM Female Pipe Swivel

MB O-Ring Boss Male Rigid

MBX O-Ring Boss Male Swivel

MF O-Ring Face Seal Male Rigid

FFXT O-Ring Face Seal Female Swivel Long

FFX O-Ring Face Seal Female Swivel

MS SAE 45° Male Rigid

FSXT SAE 45° Female Swivel Long

FSX SAE 45° Female Swivel

MBSPT British Standard Pipe Taper Male Rigid

MBSPP British Standard Pipe Parallel Male Rigid

FBSPX British Standard Pipe Parallel Female Swivel

FBFPX British Flat Face Female Swivel

C61 Code 61 Flange (3,000 psi)

SHELL Crimp Shell Only

MT Flareless Compression Male (includes nut and sleeve)

GT Grease Trap Female

KAR Karcher Pressure Wash

FW Female Weld Fitting

MW North American Stand Tube

MMSP Metric Stand Tube

MDL DIN Light Universal Seat Male Rigid (Metric)

FDINLX DIN Light Universal Seat Female Swivel (Metric)

MDH DIN Heavy Universal Seat Male Rigid (Metric)

FDINHX DIN Heavy Universal Seat Female Swivel (Metric)

FJISX JIS 30° (BSPP thread) Female Swivel

FKOMX Komatsu JIS 30° (Metric Thread) Female Swivel

MIX Inverted Flare Male Swivel

FJX45 JIC 37° Female Swivel 45° Elbow

FFX45 O-Ring Face Seal Female Swivel 45° Elbow

FSX45 SAE 45° Female Swivel 45° Elbow

FBSPX45 British Standard Pipe Parallel Female Swivel 45° Elbow

C6145 Code 61 Flange (3,000 psi) 45° Elbow

MIX45 Inverted Flare Male Swivel 45° Elbow

FDINLX45 DIN Light Universal Seat Female Swivel 45° (Metric)

FDINHX45 DIN Heavy Universal Seat Female Swivel 45° (Metric)

MMSP45 Metric Stand Tube 45° Elbow

FJX90 JIC 37° Female Swivel 90° Elbow Also available in Stainless Steel

FJX90B JIC 37° Female Swivel Block Style 90° Elbow

FFX90L O-Ring Face Seal Female Swivel Long Drop 90° Elbow

FSX90 SAE 45° Female Swivel 90° Elbow

FBSPX90 British Standard Pipe Parallel Female Swivel 90° Elbow

FBSPX90B British Standard Pipe Parallel Female Swivel Block Style 90°

MIX90 Inverted Flare Male Swivel 90° Elbow

FDINLX90 DIN Light Universal Seat Female Swivel 90° (Metric)

FDINHX90 DIN Heavy Universal Seat Female Swivel 90° (Metric)

MMSP90 Metric Stand Tube 90° Elbow

FJX90L JIC 37° Female Swivel Long Drop 90° Elbow

FFX90 O-Ring Face Seal Female Swivel 90° Elbow

FFX90M O-Ring Face Seal Female Swivel Medium Drop 90° Elbow

MPX90 NPTF Male Pipe Swivel 90° Elbow

MBX90 O-Ring Boss Male Swivel 90° Elbow

W-Series Hose Fittings for 4-Wire Spiral Hoses

MENDER Hose Mender

C6190 Code 61 Flange (3,000 psi) 90° Elbow

MJ (W) JIC 37° Male Rigid

FJX (W) JIC 37° Female Swivel Also available in Stainless Steel

MP (W) NPTF Male Pipe Rigid Also available in Stainless Steel

MPX (W) NPTF Male Pipe Swivel

MB (W) O-Ring Boss Male Rigid

MBX (W) O-Ring Boss Male Swivel

FFX (W) O-Ring Face Seal Female Swivel

FSX (W) SAE 45° Female Swivel

MENDER (W) Hose Mender

MT (W) Flareless Compression Male (includes nut and sleeve)

FBSPX (W) British Standard Pipe Parallel Female Swivel

FJISX (W) JIS 30° (BSPP thread) Female Swivel

MDL (W) DIN Light Universal Seat Male Rigid (Metric)

FDL (W) DIN Light Universal Seat Female Swivel (Metric)

MBSPP (W) British Standard Pipe Parallel Male Rigid

C61 (W) Code 61 Flange (3,000 psi)

GT (W) Grease Trap Female

FW (W) Female Weld Fitting

C62 (W) Code 62 Flange (6,000 psi)

CAT (W) Caterpillar Flange

FJX45 (W) JIC 37° Female Swivel 45° Elbow

FFX45 (W) O-Ring Face Seal Female Swivel 45° Elbow

FBSPX45 (W) British Standard Pipe Parallel Female Swivel 45° Elbow

MIX45 (W) Inverted Flare Male Swivel 45° Elbow

MIX (W) Inverted Flare Male Swivel

FDL45 (W) DIN Light Universal Seat Female Swivel 45° (Metric)

FDH45 (W) DIN Heavy Universal Seat Female Swivel 45° (Metric)

CAT45 (W) Caterpillar Flange 45° Elbow

C6122 (W) Code 61 Flange (3,000 psi) 22° Elbow





C6190L (W) Code 61 Flange (3,000 psi) 90° Elbow






CAT90 (W) Caterpillar Flange 90° Elbow

FJX90L (W) JIC 37° Female Swivel Long Drop 90° Elbow

FDH90 (W) DIN Heavy Universal Seat Female Swivel 90° (Metric)

FFX90 (W) O-Ring Face Seal Female Swivel 90° Elbow

FBSPX90 (W) British Standard Pipe Parallel Female Swivel 90° Elbow

FJX90 (W) JIC 37° Female Swivel 90° Elbow

FDL90 (W) DIN Light Universal Seat Female Swivel 90° (Metric)

FFX90M (W) O-Ring Face Seal Female Swivel Medium Drop 90° Elbow

FFX90L (W) O-Ring Face Seal Female Swivel Long Drop 90° Elbow

3-Series Thermoplastic Hose Fittings 3-00500 JIC 37° Male Rigid

3-00540 JIC 37° Female Swivel

3-00600 JIC 37° Female Swivel 45° Elbow

3-00640 JIC 37° Female Swivel 90° Elbow

3-00840 JIC 37° Female Swivel Long Drop 90° Elbow

3-00A00 SAE 45° Female Swivel

T01 NPTF Male Pipe Rigid

T-Series Hose Fittings are interchangeable with Weatherhead E Series hose fittings.

Use with SAE 100R14A Teflon/PTFE Hoses.

T04 NPTF Male Pipe Swivel

T07 SAE 45° Female Swivel

T30 O-Ring Face Seal (ORFS) Female Swivel

T18 Inverted Flare Male Swivel

T10 British Standard Pipe Parallel Female Swivel

T32 O-Ring Face Seal (ORFS) Female Swivel 90° Elbow

T-Series Teflon®/PTFE Hose Fittings T08 JIC 37° Male Rigid

T09 JIC 37° Female Swivel

T31 O-Ring Face Seal (ORFS) Female Swivel 45° Elbow

T19 Inverted Flare Male Swivel 45° Elbow

T25 JIC 37° /SAE 45° Dual Seat Female Swivel 45° Elbow

T26 JIC 37° /SAE 45° Dual Seat Female Swivel 90° Elbow

T23 SAE 45° Female Swivel 90° Elbow

T27 JIC 37° /SAE 45° Dual Seat Female Swivel 90° Long Elbow

T33 O-Ring Face Seal (ORFS) Female Swivel 90° Long Elbow

HES NPTF Male Pipe Expander

4404 NPTF Male Pipe (Beaded Hose Barb)

4501 NPTF Male Pipe 90° Elbow (Beaded Hose Barb)

4503 NPTF Male Pipe 45° Elbow (Beaded Hose Barb)

4601 O-Ring Boss 90° Elbow (Beaded Hose Barb)

4603 O-Ring Boss 45° Elbow (Beaded Hose Barb)

4604 O-Ring Boss (Beaded Hose Barb)

Steel Hose Barbs for SAE 100R4 Suction & Return Hose HAS NPTF Male Pipe

HRS NPTF Male Pipe Reducer

HAPS NPTF Male Pipe (Plated)

HCPS Hose Mender (Plated)

O-Ring Male BL-TMS Series

Insert O-Ring BL-MOR Series

Compression RepairBL-MV Series

Beadlock A/C Hose Fittings

TBC Heavy-Duty T-Bolt Hose Clamp

HYDRAULIC HOSE FITTINGS

LF Flareless Compression Female Swivel

T20 Inverted Flare Male Swivel 90° Elbow

FJX90M JIC 37° Female Swivel Medium Drop 90° Elbow

R2-00-100 NPTF Male Pipe Also available in Stainless Steel

R2-00-660 JIC 37° Female Swivel 90° Elbow

R2-00-600 JIC 37° Female Swivel Also available in Stainless Steel

R2-00-680 JIC 37° Female Swivel 45° Elbow

R2-00-500 JIC 37° Male Rigid

R2 Field-Attachable Hose Fittings

MPX90 (W) NPTF Male Pipe Swivel 90° Elbow

MIX90 (W) Inverted Flare Male Swivel 90° Elbow

MBX90 (W) O-Ring Boss Male Swivel 90° Elbow

MF (W) O-Ring Face Seal Male Rigid

FP (W) NPTF Female Pipe Rigid

MDH (W) DIN Heavy Universal Seat Male Rigid (Metric)

FDH (W) DIN Heavy Universal Seat Female Swivel (Metric)

HYDRAULAPRODUC T S

3-Series Hose Fittings are interchangeable with Synflex 3903 Series hose fittings.

Use with all SAE 100R7 or SAE 100R8 Thermoplastic Hoses.

R2 Field-Attachable Hose Fittings are reusable and and can be assembled with hand tools (a hose crimper is not required).

Use with SAE 100R2AT hydraulic hose only.

Braided Hose Fittings are interchangeable with Weatherhead U Series, Dayco-Eastman HY Series, Aeroquip FJ Series, Imperial-Eastman HU Series and Dayco SB Series hose fittings.

Use with the following hydraulic hoses: Hydraulax Tough (HT), HJK Jack Hose, SAE 100R1AT, SAE 100R2AT, SAE 100R3, SAE 100R16, and SAE 100R17.

W-Series Hose Fittings feature Bite-To-The Wire performance at an affordable cost.

Recommended for use with 4-wire SAE 100R12 and DIN 20023 4SH hydraulic hoses.

May also be used with HJK Jack Hose, Hydraulax Tough (HT), as well as SAE 100R1AT, 100R2AT, 100R16 and 100R17 hoses.

Braze-On BL-BR Series

O-Ring Female BL-TFS Series

Mender BL-RM Series

©2007-2016 Hydraulax Products Printed in the U.S.A.

HYDRAULAPRODUC T S

2 locations to serve you!

Philadelphia: 215-744-28285606 Tulip St, Philadelphia PA 19124

Mechanicsburg: 717-691-3171

6360 Basehore Rd, Mechanicsburg, PA 17050

HOSE ASSEMBLY TOOLSHydraulax Products has a full selection of tools for crimping, swaging, and cutting hose.

Always measure your crimpsPermanently-attached hose fittings must be crimped to manufacturer specifications. For complete crimp specification data, please see our catalog or visit www.hydraulax.com.

93293-3VGA 6" Digital Caliper

HOSE PROTECTIONWe carry many products to extend the service life of your hydraulic hoses, such as Nylon Protective Sleeving (NPS), Steel and Plastic Hose Guard, and more.

Visit our website for crimp specifications www.hydraulax.com

STEEL FITTINGS & ADAPTERSHYDRAULAPRODUC T S

18S Series Pressure Balanced Parallel Plane Swivels

9S Series Pressure Balanced 90° Swivels

9SS Series Dual-Plane 90° Swivels

S Series Full Flow In-Line Swivels

Fluid Conducting Swivel Joints

4000 Buna O-Ring for Straight Thread

Straight Thread O-Ring Boss (ORB)6400 Male JIC x O-Ring Boss

6400L Male JIC x O-Ring Boss Long

6401 O-Ring Boss x Male NPTF

6402 O-Ring Boss x JIC 37° Female Swivel

6403 O-Ring Boss Union

6404 Female O-Ring Boss x Male NPTF

6405 O-Ring Boss x Female NPTF

6407 O-Ring Boss Adjustable Union

6408 O-Ring Boss Hex Head Plug

6409 O-Ring Boss Hex Socket Plug

6410 O-Ring Boss Reducer/Expander

6801 Male JIC x O-Ring Boss 90° Elbow

6801L Male JIC x O-Ring Boss 90° Long Elbow

6801LL Male JIC x O-Ring Boss 90° Extra Long Elbow

6802 Male JIC x O-Ring Boss 45° Elbow

6803 JIC 37° x O-Ring Boss Branch Tee

6804 Male JIC x O-Ring Boss Run Tee

6805 O-Ring Boss x Female NPTF 90° Elbow

6805LL O-Ring Boss x Female NPTF 90° Extra Long Elbow

6806 O-Ring Boss x Male NPTF 90° Elbow

6807 O-Ring Boss 90° Male Elbow

6809 O-Ring Boss x Female JIC Swivel 90° Elbow

6815 O-Ring Boss x Female O-Ring Boss 90° Elbow

6900 O-Ring Boss x Female NPSM Swivel

6901 O-Ring Boss x Female NPSM Swivel 90° Elbow

6902 O-Ring Boss x Female NPSM Swivel 45° Elbow

Teflon® (PTFE) Thread Sealing Paste

Teflon® (PTFE) Thread Sealing Tape

459 Seal Nut for Male Pipe (NPTF)

1404 Male NPTF x Female NPSM Swivel

1405 Female NPTF x Female NPSM Swivel

1406 Female NPSM Swivel Union

1501 Male NPTF x Female NPSM Swivel 90° Elbow

1501L Male NPTF x Female NPSM Swivel 90° Long Elbow

61SF Code 61 Split Flange Half

Dash Size

Tube/Pipe Size

Pipe Thread (NPTF/NPSM) JIC 37° Flare O-Ring Boss

(ORB)O-Ring Face

Seal (OFS)Flareless

Compression

-02 1⁄8" 1⁄8 – 27 5⁄16 – 24 5⁄16 – 24 5⁄16 – 24-03 3⁄16" 3⁄8 – 24 3⁄8 – 24 3⁄8 – 24-04 1⁄4" 1⁄4 – 18 7⁄16 – 20 7⁄16 – 20 9⁄16 – 18 7⁄16 – 20-05 5⁄16" 1⁄2 – 20 1⁄2 – 20 1⁄2 – 20-06 3⁄8" 3⁄8 – 18 9⁄16 – 18 9⁄16 – 18 11⁄16 – 16 9⁄16 – 18-08 1⁄2" 1⁄2 – 14 3⁄4 – 16 3⁄4 – 16 13⁄16 – 16 3⁄4 – 16-10 5⁄8" 7⁄8 – 14 7⁄8 – 14 1– 14 7⁄8 – 14-12 3⁄4" 3⁄4 – 14 11⁄16 – 12 11⁄16 – 12 13⁄16 – 12 11⁄16 – 12-14 7⁄8" 13⁄16 – 12 13⁄16 – 12 13⁄16 – 12-16 1" 1– 111⁄2 15⁄16 – 12 15⁄16 – 12 17⁄16 – 12 15⁄16 – 12-20 11⁄4" 11⁄4 – 111⁄2 15⁄8 – 12 15⁄8 – 12 111⁄16 – 12 15⁄8 – 12-24 11⁄2" 11⁄2 – 111⁄2 17⁄8 – 12 17⁄8 – 12 2 – 12 17⁄8 – 12-32 2" 2 – 111⁄2 21⁄2 – 12 21⁄2 – 12 21⁄2 – 12

JIC 37° Flare Tube Fittings Pipe Fittings (NPTF & NPSM)

Four-Bolt Flanges

600 Series ISO 7241-1 Series A

Interchanges with Parker 6600 Series

Hydraulic Quick Disconnects

302 JIC 37° Short Flare Nut

304 JIC 37° Long Flare Nut

304C JIC 37° Flare Tube Cap

306 JIC 37° Bulkhead Locknut

318 JIC 37° Tube Nut (requires tube sleeve)

319 JIC 37° Tube Sleeve (requires tube nut)

418 Convert-A-Flare Tube Nut (JIC 37° to Flareless)

419 Convert-A-Flare Tube Sleeve (JIC to Flareless)

2403 JIC 37° Tube Union

2403LH Large Hex JIC 37° Tube Union

2404 Male JIC x Male NPTF

2404L Male JIC x Male NPTF Long

2404LL Male JIC x Male NPTF Extra Long

2405 Male JIC x Female NPTF

2406 JIC 37° Tube Reducer/Enlarger

2408 JIC 37° Tube Plug

2500 JIC 37° Tube Union 90° Elbow

2501 Male JIC x Male NPTF 90° Elbow

2501L Male JIC x Male NPTF 90° Long Elbow

2501LL Male JIC x Male NPTF 90° Double Long Elbow

2501LLL Male JIC x Male NPTF 90° Triple Long Elbow

MTS JIC 37° Tube Sleeve for Metric Tubing

2502 Male JIC x Female NPTF 90° Elbow

2503 Male JIC x Male NPTF 45° Elbow

2504 JIC Tube Union 45° Elbow

2505 Male JIC x Female NPTF 45° Elbow

2601 Male JIC x Male NPTF Branch Tee

2602 Male JIC x Female NPTF Branch Tee

2603 JIC 37° Tube Union Tee

2605 Male JIC x Male NPTF Run Tee

2606 Male JIC x Female NPTF Run Tee

2607 Male JIC x Male NPTF x Male NPTF Tee

2611 Male JIC x Male NPTF x Female NPTF Tee

2613 Male NPTF x Female NPTF x Male JIC Tee

2650 JIC Tube Union Cross

2700LN JIC 37° Bulkhead Union with Locknut

2701LN JIC 37° Bulkhead Union 90° Elbow with Locknut

2702LN JIC 37° Bulkhead Union 45° Elbow with Locknut

2703LN JIC 37° Bulkhead Branch Tee with Locknut

2704LN JIC 37° Bulkhead Run Tee with Locknut

2705LN Female NPTF x JIC 37° Bulkhead with Locknut

2706LN Male NPTF x JIC Bulkhead with Locknut

6500 Male JIC x Female JIC Swivel 90° Elbow

6500BT Male JIC x Female JIC Swivel Bent Tube Elbow

6501 Male NPTF x Female JIC Swivel 90° Elbow

6502 Male JIC x Female JIC Swivel 45° Elbow

6503 Female JIC Swivel x Female NPTF 90° Elbow

6504 Male JIC x Female JIC Swivel Adapter

6505 Male NPTF x Female JIC Swivel

6506 Female NPTF x Female JIC Swivel

6565 Female JIC Swivel Union

6600 Male JIC x Female JIC Swivel Branch Tee

6602 Male JIC x Female JIC Swivel Run Tee

41157 Male JIC x O-Ring Port Adapter

1502 Female NPTF x Female NPSM Swivel 90° Elbow

1503 Male NPTF x Female NPSM Swivel 45° Elbow

1504 Female NPTF x Female NPSM Swivel 45° Elbow

1601 Male NPTF x Female NPSM Swivel Branch Tee

1602 Female NPTF x Female NPSM Swivel Branch Tee

1603 Female NPSM Swivel Tee

5000 Female Pipe (NPTF) Coupling

5404 Hex Nipple (NPTF)

5404N Seamless Pipe Nipple (NPTF)

5405 Male NPTF x Female NPTF Increase/ Extension

5406 Hex Reducer Pipe Bushing (NPTF)

5406C Pipe Cap (NPTF)

5406H Face Reducer Pipe Bushing (NPTF)

5406P Hex Head Pipe Plug (NPTF)

5407 Square Head Pipe Plug (NPTF)

27015 Flareless Compression Reducer

27105 Flareless Tube Nut (use with Tube Sleeve)

27129 Flareless Compression Cap

27165A Flareless Tube Sleeve (use with Tube Nut)

27205 Flareless Compression x Male NPTF

27208 JIC x Flareless Tube Union

27229 Flareless Compression Tube Plug

27255 Flareless Compression x Female NPTF

Flareless Compression Tube Fittings

27305 Flareless Compression Tube Union

27306 Flareless Compression Large Hex Tube Union

27315 Flareless Compression x O-Ring Boss

27316 Flareless Compression x O-Ring Boss Long

27325 Flareless Compression Bulkhead Union

27328 JIC x Flareless Bulkhead Tube Union

27355 Flareless x Male NPTF 45° Elbow

27365 Flareless Compression x O-Ring Boss 45° Elbow

27405 Flareless x Male NPTF 90° Elbow

27455 Flareless x Female NPTF 90° Elbow

27505 Flareless Compression Union 90° Elbow

27515 Flareless x O-Ring Boss 90° Elbow

27525 Flareless Bulkhead Union 90° Elbow

27605 Flareless x Male NPTF Branch Tee

27655 Flareless x Female NPTF Branch Tee

27705 Flareless Compression Union Tee

27715 Flareless x O-Ring Boss Branch Tee

27716 Flareless x O-Ring Boss Run Tee

27755 Flareless x Male NPTF Run Tee

27805 Flareless x Female NPTF Run Tee

27924 Flareless Compression Bulkhead Locknut

27955 Flareless Compression Union Cross

5701 Male JIC x Male NPTF Swivel 90° Elbow

FS304C Face Seal Cap

FS306 Face Seal Bulkhead Locknut

FS318 Face Seal Tube Nut (Braze)

FS319 Face Seal Tube Sleeve (Braze)

FS319R Face Seal Tube Sleeve Reducer (Braze)

FS418 Face Seal Tube Nut (No-Braze)

FS419 Face Seal Tube Sleeve (No-Braze)

FS719 Face Seal No-Braze Ferrule

FS4000 Face Seal O-Ring

O-Ring Face Seal (ORFS)FS2403 Face Seal Tube Union

FS2404 Face Seal x Male NPTF

FS2406 Face Seal Swivel Nut Reducer

FS2408 Face Seal Plug

FS2500 Face Seal Union 90° Elbow

FS2501 Face Seal x Male NPTF 90° Elbow

FS2503 Face Seal x Male NPTF 45° Elbow

FS2704LN Face Seal Bulkhead Union Run Tee with Locknut

FS6504 Face Seal Swivel Nut x Male JIC

FS6809 Face Seal Swivel Nut x O-Ring Boss 90° Elbow

FS2601 Face Seal x Male NPTF Branch Tee

FS6400 Face Seal x O-Ring Boss

FS6590 Face Seal x Male JIC 90° Elbow

FS7504 Face Seal x Face Seal Swivel Nut Adapter

FS2603 Face Seal Union Tee

FS6400L Face Seal x O-Ring Boss Long

FS6600 Face Seal Swivel Nut Branch Tee

FS2650 Face Seal Union Cross

FS6402 Face Seal x Female JIC Swivel

FS6602 Face Seal Swivel Nut Run Tee

FS2700LN Face Seal Bulkhead Union with Locknut

FS6403 Face Seal x Male JIC

FS6801 Face Seal x O-Ring Boss 90° Elbow

FS2701LN Face Seal Bulkhead Union 90° Elbow with Locknut

FS6412 Face Seal Swivel x O-Ring Boss

FS6802 Face Seal x O-Ring Boss 45° Elbow

FS2702LN Face Seal Bulkhead Union 45° Elbow with Locknut

FS6500 Face Seal Swivel Nut 90° Elbow

FS6803 Face Seal x O-Ring Boss Branch Tee

FS2703LN Face Seal Bulkhead Union Branch Tee with Locknut

FS6502 Face Seal Swivel Nut 45° Elbow

FS6804 Face Seal x O-Ring Boss Run Tee

61SF-KIT Code 61 Split Flange Kit

62SF Code 62 Split Flange Half

62SF-KIT Code 62 Split Flange Kit

1700 Male JIC x Code 61 Flange Forged

1703 Male JIC x Code 61 Flange 45° Forged Elbow


1800 Male JIC x Code 62 Flange Forged



6100 Male JIC x Code 61 Flange Brazed

6145 Male JIC x Code 61 Flange 45° Bent Tube Elbow


6200 Male JIC x Code 62 Flange Brazed



FS1700 Face Seal x Code 61 Flange

FS1703 Face Seal x Code 61 Flange 45° Elbow


FS1800 Face Seal x Code 62 Flange



W43 Female NPTF x Code 61 Flange Pad

W44 Female NPTF x Code 62 Flange Pad

W46 Female O-Ring Boss x Code 61 Flange Pad

W48 Female O-Ring Boss x Code 62 Flange Pad

W300 Male JIC x Code 61 Flange Pad

W304 Face Seal x Code 61 Flange Pad

W600 Male JIC x Code 62 Flange Pad

W604 Face Seal x Code 62 Flange Pad

610 Buna O-Ring for Flange (Code 61 or 62)

5408 Square Socket Pipe Plug (NPTF)

5409 Hex Socket Pipe Plug (NPTF)

5500 90° Male Pipe Elbow (NPTF)

5503 Male NPTF x Female NPTF 45° Street Elbow

5504 90° Female Pipe Elbow (NPTF)

5505 45° Female Pipe Elbow (NPTF)

5600 Male Pipe Tee (NPTF)

5601 Male NPTF x Female NPTF Branch Tee

5602 Male NPTF x Female NPTF Street Tee

5603 Male NPTF x Female NPTF Run Tee

5604 Female NPTF x Male NPTF Branch Tee

5605 Female Pipe Tee (NPTF)

5652 Female Pipe Cross (NPTF)

5655 Female NPTF x Male NPTF Cross

5700 Male NPTF x Male NPTF Swivel 90° Elbow

5701 Male JIC x Male NPTF Swivel 90° Elbow

5702 Female NPTF x Male NPTF Swivel 90° Elbow

5501 45° Male Pipe Elbow (NPTF)

5502 Male NPTF x Female NPTF 90° Street Elbow

4404 Hose Barb x Male NPTF

4501 Hose Barb x Male NPTF 90° Elbow

4503 Hose Barb x Male NPTF 45° Elbow

4504 Hose Barb Mender Tee

4601 Hose Barb x O-Ring Boss 90° Elbow

4603 Hose Barb x O-Ring Boss 45° Elbow

4604 Hose Barb x O-Ring Boss

TBC T-Bolt Hose Clamp

Beaded Hose Barbs700 Series ISO 7241-1 Series B


AG Series ISO 5675 Agricultural Interchange


Call us for tools, too!Tube cutters, hose saws, flaring tools and more…

2 LOCATIONS TO SERVE YOU

PHILADELPHIA - 215-744-2828

MECHANICSBURG - 717-691-3171

© Copyright 2009 and 2014, Hydraulax Products Inc. All rights reserved. Printed in the U.S.A.

GOT STAINLESS?Many of the fittings shown here are also

available in Type 316 Stainless Steel.

HT Series ISO 16028 Flushface Interchange

Interchanges with Parker FEM Series

4100 Series Wet Line Coupling


HYDRAULAPRODUC T S BRASS FITTINGS & ADAPTERS

HYDRAULAPRODUC T S

Coiled Air Hose Assembly

Brass Pipe Fittings (NPTF)

341 SAE 45° Long Flare Nut

342 SAE 45° Tube Union

343 Check Valve (SAE 45° x NPTF)

344 SAE 45° Union Tee

345 SAE 45° x NPTF Male Pipe Branch Tee

346 SAE 45° x NPTF Female Pipe

348 SAE 45° x NPTF Male Pipe

349 SAE 45° x NPTF Male Pipe 90°

SAE 45° Flare

350 SAE 45° x NPTF Female Pipe 90°

351 SAE 45° x NPTF Male Pipe Run Tee

354 SAE 45° x NPTF Male Pipe 45°

355 SAE 45° Union 90°

359 SAE 45° Cap

31110 SAE 45° Short Flare Nut

3229 SAE 45° Tube Plug

SAE 45° x Inverted Flare Adapter

Truck Shut-Off Valve

Assorted Valves and DrainsDrain Cock NPTF Female

Mini Ball ValveGround Plug Drain NPTF Male x NPTF

Female Mini Ball ValveSAE 45° x SAE 45¯ Shut-Off Valve

SAE 45° x NPTF Male Shut-Off Valve

NPTF Double Female Shut-Off Valve

NPTF Male x NPTF Female Shut-Off Valve

Marine Type Shut-Off Valve (NPTF)

NPTF Male x NPTF Female Needle Valve

3-Way and 4-Way Shut-Off Valves

Drains (Internal and External Seats)

Hose to Pipe Needle Valves

Air Vent

Angle Bib Drain

Gasoline Shut-Off Valve (with screen filter)

NPTF Double Female Needle Valve

NPTF Double Male Needle Valve

SAE 45° Double Male Needle Valve

SAE 45° x NPTF Male Needle Valve

SAE 45° x NPTF Male 90° Needle Valve

360 Compression Tube Sleeve

361 Compression Tube Nut

362 Compression Tube Union

363 Check Valve (Compression x NPTF)

364 Compression Union Tee

365 Compression Union 90°

366 Compression x NPTF Female Pipe

368 Compression x NPTF Male Pipe

Brass Compression

369 Compression x NPTF Male Pipe 90°

370 Compression x NPTF Female Pipe 90°

371 Compression x NPTF Male Pipe Run Tee

372 Compression x NPTF Male Pipe Branch Tee

374 Compression Bulkhead Tube Union

376 NPTF Female x NPTF Male x Compression Tee

31611 Long Compression Nut

32030 Tubing Insert

Push-In31129 Plastic Plug

31154S Push-In x NPTF Male Pipe Swivel 45°

31162 Push-In Tube Union

31164 Push-In Tube Union Tee

31165 Push-In Tube Union 90°

31166 Push-In x NPTF Female Pipe

31168 Push-In x NPTF Male Pipe

31169 Push-In x NPTF Male Pipe 90°

31169S Push-In x NPTF Male Pipe Swivel 90°

31170 Push-In x NPTF Female Pipe 90°

31170S Push-In x NPSM Female Pipe Swivel 90°

31171 Push-In x NPTF Male Pipe Run Tee

31171S Push-In x NPTF Male Pipe Swivel Run Tee

31172 Push-In x NPTF Male Pipe Branch Tee

31172S Push-In x NPTF Male Pipe Swivel Branch Tee

31182 Push-In Bulkhead Tube Union

31186 Push-In Bulkhead x NPTF Female Pipe

31188 Push-In Y Connector x NPTF Male Pipe

31189 Push-In Y Union

3100 Inverted Flare Tube Nut (Brass)

3105 Inverted Flare Tube Nut (Steel)

3131 Inverted Flare Plug (Steel)

3202 Inverted Flare x NPTF Male Pipe

3252 Inverted Flare x NPTF Female Pipe

Inverted Flare3302 Inverted Flare Union

3352 Inverted Flare x NPTF Male Pipe 45°

3402 Inverted Flare x NPTF Male Pipe 90°

3452 Inverted Flare x NPTF Female Pipe 90°

3502 Inverted Flare Union 90°

3602 Inverted Flare x NPTF Male Pipe Branch Tee

3652 Inverted Flare x NPTF Female Pipe Branch Tee

3702 Inverted Flare Union Tee

3752 Inverted Flare x NPTF Male Pipe Run Tee

37896 Inverted Flare Long Tube Nut (Steel)

SAE 45° x Inverted Flare Adapter

271 NPTF Male Pipe Swivel

272 NPTF Male Pipe

273 NPFT Male Pipe 90°

274 NPFT Male Pipe 45°

278 NPSM Female Pipe Swivel (Ballseat type)

280 NPSM Female Pipe Swivel (Gasket type)

282 SAE 45° Male

284 SAE 45° Female Swivel

Push-Lock Hose Barbs Push-Lock Hose Barbs do not require clamps or ferrules when used with Push-Lock Hose.

286 JIC 37° Male

9900 BSPP Female Swivel (Steel)

296 Push-Lock Hose Mender

287 SAE 45° / JIC 37° Dual Seat Female Swivel

9905 BSPP Female Swivel 45° (Steel)

288 JIC 37° Female Swivel

9910 BSPP Female Swivel 90° (Steel)

289 JIC 37° Female Swivel 90° (Steel)

9915 BSPT Male Rigid (Steel)

290 Inverted Flare Male Swivel

9920 BSPP Male Rigid (Steel)

292 Inverted Flare Female

294 Rigid Tube Shank (North American)

294M Rigid Tube Shank (Metric)

102 NPTF Male Pipe

103 NPTF Male Pipe Swivel

104 NPTF Female Pipe

124 NPSM Female Pipe Swivel

129 NPTF Male Pipe 90°

139 NPTF Male Pipe 45°

142 SAE 45° Male Rigid

143 SAE 45° / JIC 37° Dual Seat Female Swivel

Brass Hose Barbs

144 SAE 45° Female Swivel

513 Garden Hose Cap

145 JIC 37° Female Swivel

514 Garden Hose x NPTF (3/4" Male, 1/2" Female)

172 NPSM x NPTF Adapter

585 Garden Hose Male

176 NPSM x NPSM Union

588 Garden Hose Female Swivel

177 Hose Mender Elbow

178 Hose Mender

179 Hose Mender Tee

Gladhand Couplings

Coiled Air Brake Hose Kit

Bulkhead Coupling NPTF Male x NPTF Female

Bulkhead Coupling NPTF Male x NPTF Dual (Male and Female)

Bulkhead Coupling NPTF Female x NPTF Female

Miscellaneous AccessoriesIndustrial Interchange Quick Disconnects

ARO Speed Connect Couplers

Blow Gun Pressure Gauges Air Line Filters Regulators Micro-Fog Lubricators

Compression Air Brake31460 Tube Sleeve (Nylon Tubing)

31360 Tube Sleeve (Copper Tubing)

31461 Tube Nut (Nylon Tubing)

31361 Tube Nut (Copper Tubing)

31462 Tube Union (Nylon Tubing)

31362 Tube Union (Copper Tubing)

31464 Tube Union Tee (Nylon Tubing)

31364 Tube Union Tee (Copper Tubing)

31465 Tube Union 90° (Nylon Tubing)

31365 Tube Union 90° (Copper Tubing)

31466 Nylon Tubing x NPTF Female Pipe

31366 Copper Tubing x NPTF Female Pipe

31468 Nylon Tubing x NPTF Male Pipe

31368 Copper Tubing x NPTF Male Pipe

31469 Nylon Tubing x NPTF Male Pipe 90°

31369 Copper Tubing x NPTF Male Pipe 90°

31469L Nylon Tubing x NPTF Male Pipe 90° Long

31369L Copper Tubing x NPTF Male Pipe 90° Long

31470 Nylon Tubing x NPTF Female Pipe 90°

31370 Copper Tubing x NPTF Female Pipe 90°

31471 Nylon Tubing x NPTF Male Pipe Run Tee

31371 Copper Tubing x NPTF Male Pipe Run Tee

31472 Nylon Tubing x NPTF Male Pipe Branch Tee

31372 Copper Tubing x NPTF Male Pipe Branch Tee

31474 Bulkhead Tube Union (Nylon Tubing)

31480 Nylon Tubing x NPTF Male Pipe 45°

31380 Copper Tubing x NPTF Male Pipe 45°

31482 Nylon Tubing x NPTF Female x NPTF Male Tee

31382 Copper Tubing x NPTF Female x NPTF Male Tee

31484 Nylon Tubing Tubing Insert

Push-In Air Brake For use with Nylon Air Brake Tubing

31862 Push-In Air Brake Tube Union

31864 Push-In Air Brake Union Tee

31865 Push-In Air Brake Union 90°

31866 Push-In Air Brake x Female Pipe

31868 Push-In Air Brake x Male Pipe

31869 Push-In Air Brake x Male Pipe 90°

31871 Push-In Air Brake x Male Pipe Run Tee

31871S Push-In Air Brake x Male Pipe Swivel Run Tee

31872 Push-In Air Brake x Male Pipe Branch Tee

31874 Push-In Air Brake Bulkhead Tube Union

31880 Push-In Air Brake x Male Pipe 45°

31880S Push-In Air Brake x Male Pipe Swivel 45°

31869S Push-In Air Brake x Male Pipe Swivel 90°

31870 Push-In Air Brake x Female Pipe 90°

31872S Push-In Air Brake x Male Pipe Swivel Branch Tee

Wormgear Hose Clamps

Brass Hose Ferrules

Forged Brass Ball Valves

31102 Locknut for Pipe

33129 NPTF Cap

33150 NPTF Slotted Head Plug

33151 NPTF Square Head Plug

33152 NPTF Hex Head Plug

33155 NPTF Countersunk Hex Head Plug

33200 NPTF Female x NPTF Male Extender/Reducer

33220 NPTF Male x NPTF Female Reducer Bushing

33250 Female Pipe Union

33300 NPTF Female Pipe Coupling

33325 Hex Pipe Nipple (NPTF)

33326 Seamless Pipe Nipple (NPTF)

33350 45° Street Elbow

33400 90° Street Elbow

33455 90° Male Pipe Elbow

33500 90° Female Pipe Elbow

33600 NPTF Female x NPTF Male Pipe Branch Tee

33700 NPTF Female Pipe Tee

33750 Street Tee

LCTS Teflon® (PTFE) Paste Thread Sealant

33950 NPTF Female Pipe Cross

TT Teflon® (PTFE) Thread Sealing Tape

8-2404 JIC Male x NPTF Male

8-2501 JIC Male x NTPF Male 90°

K11 General Purpose Hose Use with Brass Hose Barbs

3384 Push-Lock Hose Use with Push-Lock Hose Barbs

NT100 Nylon Air Brake Tubing

Available in 9 colors

2 Locations to serve You

PhiLadeLPhia - 215-744-2828

Mechanicsburg - 717-691-3171

Dash Size

Tube/Pipe Size

Pipe Thread (NPTF/NPSM) JIC 37° Flare O-Ring Boss

(ORB)O-Ring Face

Seal (OFS)Flareless

Compression

-02 1⁄8" 1⁄8 – 27 5⁄16 – 24 5⁄16 – 24 5⁄16 – 24-03 3⁄16" 3⁄8 – 24 3⁄8 – 24 3⁄8 – 24-04 1⁄4" 1⁄4 – 18 7⁄16 – 20 7⁄16 – 20 9⁄16 – 18 7⁄16 – 20-05 5⁄16" 1⁄2 – 20 1⁄2 – 20 1⁄2 – 20-06 3⁄8" 3⁄8 – 18 9⁄16 – 18 9⁄16 – 18 11⁄16 – 16 9⁄16 – 18-08 1⁄2" 1⁄2 – 14 3⁄4 – 16 3⁄4 – 16 13⁄16 – 16 3⁄4 – 16-10 5⁄8" 7⁄8 – 14 7⁄8 – 14 1– 14 7⁄8 – 14-12 3⁄4" 3⁄4 – 14 11⁄16 – 12 11⁄16 – 12 13⁄16 – 12 11⁄16 – 12-14 7⁄8" 13⁄16 – 12 13⁄16 – 12 13⁄16 – 12-16 1" 1– 111⁄2 15⁄16 – 12 15⁄16 – 12 17⁄16 – 12 15⁄16 – 12-20 11⁄4" 11⁄4 – 111⁄2 15⁄8 – 12 15⁄8 – 12 111⁄16 – 12 15⁄8 – 12-24 11⁄2" 11⁄2 – 111⁄2 17⁄8 – 12 17⁄8 – 12 2 – 12 17⁄8 – 12-32 2" 2 – 111⁄2 21⁄2 – 12 21⁄2 – 12 21⁄2 – 12

BRITISH & METRIC ADAPTERS

2 LOCATIONS TO SERVE YOU 5606 Tulip St Philadelphia, PA 19124 215-744-2828 6360 Basehore Rd Mechanicsburg, PA 17050 717-691-3171

Braided Hose Fittings are interchangeable with Weatherhead U Series, Dayco-Eastman HY Series, Aeroquip FJ Series, Imperial-Eastman HU Series and Dayco SB Series hose fittings.

Use with the following hydraulic hoses: HT Tough Cover, HJK Jack Hose, SAE 100R1AT, SAE 100R2AT, SAE 100R3, SAE 100R16, and SAE 100R17.

Also available, W Series Hose Fittings for 4-wire spiral hoses.

Push-Lock Hose Barbs need no clamps or ferrules when used with Push-Lock Hose.

9391 Komatsu x Female Komatsu Swivel Run Tee

BSPP/BSPT l.Rh. DIN Light S.Rh. DIN HeavyNominal Pipe Size

Dash Size

Nominal Thread Size

Male Thread O.D.

Nominal Tube Size

Dash Size

Nominal Thread Size

Male Thread O.D.

Nominal Tube Size

Dash Size

Nominal Thread Size

Male Thread O.D.

1/8" 02 1/8-28 3/8" 6 mm L6 M12x1.5 12 mm 6 mm S6 M14x1.5 14 mm1/4" 04 1/4-19 33/64" 8 mm L8 M14x1.5 14 mm 8 mm S8 M16x1.5 16 mm3/8" 06 3/8-19 19/32" 10 mm L10 M16x1.5 16 mm 10 mm S10 M18x1.5 18 mm1/2" 08 1/2-14 3/4" 12 mm L12 M18x1.5 18 mm 12 mm S12 M20x1.5 20 mm5/8" 10 5/8-14 7/8" 15 mm L15 M22x1.5 15 mm 14 mm S14 M22x1.5 22 mm3/4" 12 3/4-14 1-1/32" 18 mm L18 M26x1.5 18 mm 16 mm S16 M24x1.5 24 mm

1" 16 1-11 1-5/16" 22 mm L22 M30x2.0 22 mm 20 mm S20 M30x2.0 30 mm1-1/4" 20 1¼-11 1-21/32" 28 mm L28 M36x2.0 28 mm 25 mm S25 M36x2.0 36 mm1-1/2" 24 1½-11 1-7/8" 35 mm L35 M45x2.0 35 mm 30 mm S30 M42x2.0 42 mm

2" 32 2-11 2-11/32" 42 mm L42 M52x2.0 42 mm 35 mm S38 M52x2.0 52 mm

British Standard Pipe Parallel (BSPP) Metric Fittings9001 Metric x Metric

6606 Face Seal x Metric Heavy Dual Purpose (Port/Tube)

6605 Face Seal x Metric Light Dual Purpose (Port/Tube)

6169 Face Seal x Metric Adj. Branch Tee

6168 Face Seal x Metric Adj. Run Tee

6069 Face Seal x Metric Adj. 90° Elbow

6068 Face Seal x Metric (includes washer & O-ring)

British Standard Pipe Taper (BSPT)9003 British Pipe Nipple (BSPP x BSPT)

9008 BSPT x NPTF Male Pipe

9010 British Pipe Nipple (BSPT x BSPT)

9011 JIC 37° x BSPT

9030T BSPT Hex Head Plug

9030TCSP BSPT Countersunk Hex Plug

9031 BSPT x Female BSPT Reducer Bushing

9032 BSPT x Female BSPP Bushing

9032S BSPT x Female BSPP Swivel

9034 BSPP x Female BSPT Extended Bushing

9042 BSPT x NPTF Female Pipe

9062 BSPT x Female BSPP Swivel 90° Elbow

9063 JIC 37° x BSPT 90° Elbow

9064 JIC 37° x BSPT 45° Elbow

9163 JIC 37° x BSPT Run Tee

9164 JIC 37° x BSPT Branch Tee

9223 JIS 30° x BSPT

9224 JIS 30° x BSPT 90° Elbow


9233 Komatsu 30° x BSPT

9536 BSPT x Female Straight Thread (ORB)

MBSPT BSPT Male Rigid

Japanese Industrial Standard (JIS 30°) Uses BSPP thread

9999 JIS 30° Sealing Seat (converts BSPP to JIS 30°)

9337 JIC 37° x JIS 30°

Specialty Mobile Equipment Komatsu, Kobelco, and JSW (Japan Steel Works)

9232 Komatsu Cap

9231 Komatsu Hex Head Plug

9230 JIC 37° x Female Komatsu

9210 JIC 37° x Female BSPP Flat-Face Swivel (HIAB)

6247 Face Seal x Kobelco

6237 Face Seal x Komatsu

6230 Face Seal x Female Komatsu

9249 Kobelco Tube Cap

9248 Kobelco Tube Plug

9247 JIC 37° x Kobelco

9245 JIC 37° x Japan Steel Works (JSW)

9237 JIC 37° x Komatsu

9236 Komatsu x Komatsu Tube Union

9233 Komatsu x BSPT

Seals, Sealing Seats, Etc.9999 JIS 30° Sealing Seat (converts BSPP to JIS 30°)

9777 Flat-Face BSPP (HIAB) 30° Sealing Seat

9500-V Bonded Seal for BSPP (Viton Seal)

9500-MM Bonded Seal for Metric Thread (Buna)

9500 Bonded Seal for BSPP (Buna Seal)

9392 Komatsu x Female Komatsu Swivel 90° Elbow

9336 JIS 30° Tube Union

9292 JIS 30° x Female JIS 30° Swivel 90° Elbow

9291 JIS 30° x Female JIS 30° Swivel Run Tee

9278 JIS 30° x Straight Thread (ORB) 90° Elbow

9277 JIS 30° x Straight Thread (ORB)

9259 JIS 30° x BSPP Adj. 90° Elbow

9226 Female JIC 37° Swivel x Female JIS 30° Swivel



9223 JIS 30° x BSPT

9222 JIS 30° Cap

9221 JIS 30° Hex Head Plug

9220 JIC 37° x Female JIS 30°

6337 Face Seal x JIS 30°

9029A Metric Countersunk Plug (No Seal)

9029 Metric Countersunk Sealed Plug

9024 Metric x Female JIC 37° Swivel

9022 JIC 37° x Female Metric Swivel

9019 BSPP x Female Metric Swivel

9018 Metric x Female BSPP Swivel

9004 BSPP x Metric

9069L JIC 37° x Metric Adj. 90° Elbow Long

9069 JIC 37° x Metric Adj. 90° Elbow

9068 JIC 37° x Metric (includes washer & O-ring)

9067 JIC 37° x Metric

9066 JIC 37° x Metric Adj. 45° Elbow

9043M Female Metric Coupling

9030M Metric Hex Head Plug

9202 Metric Tube Cutting Ring

9201S Metric Tube Nut (Heavy Series)

9201LL Metric Tube Nut (Extra Light Series)

9201L Metric Tube Nut (Light Series)

9200 JIC 37° x Metric Standpipe

9169 JIC 37° x Metric Adj. Branch Tee

9168 JIC 37° x Metric Adj. Run Tee

9325 NPTF Male Pipe x Female Metric

9235 Metric x NPTF Female Pipe

9204S Metric Tube Cap (Heavy Series)

9204L Metric Tube Cap (Light Series)

9203S Metric Tube Plug (Heavy Series)

9203L Metric Tube Plug (Light Series)

9202LL Metric Tube Cutting Ring (Extra Light Series)

FDINLX90 DIN Light Universal Seat Female Swivel 90°

FDINLX45 DIN Light Universal Seat Female Swivel 45°

FDINLX DIN Light Universal Seat Female Swivel

9635 Metric Dual Purpose (Port or Tube) x NPTF Female

9606 JIC x Metric Dual Purpose Heavy (Port or Tube)

9605 JIC x Metric Dual Purpose Light (Port or Tube)

9335 Metric x Female Straight Thread (ORB)

MDH DIN Heavy Universal Seat Male Rigid

MDL DIN Light Universal Seat Male Rigid

FDINHX90 DIN Heavy Universal Seat Female Swivel 90°

FDINHX45 DIN Heavy Universal Seat Female Swivel 45°

FDINHX DIN Heavy Universal Seat Female Swivel

9000 BSPP x BSPP British Pipe Nipple

6159 Face Seal x BSPP Adj. Branch Tee

6158 Face Seal x BSPP Adj. Run Tee

6059 Face Seal x BSPP Adj. 90° Elbow

6058 Face Seal x BSPP Adj. 45° Elbow

6002L Face Seal x BSPP Long (includes washer & O-ring)

6002 Face Seal x BSPP (includes washer & O-ring)

9007 BSPP x NPTF Male Pipe

9006 Straight Thread (ORB) x BSPP

9005 JIC 37° x BSPP

9004 BSPP x Metric

9003 BSPP x BSPT British Pipe Nipple

9002L JIC 37° x BSPP Long (includes washer & O-ring)

9002 JIC 37° x BSPP (includes washer & O-ring)

9025 Female BSPP Swivel Union

9023 NPTF Male Pipe x Female BSPP Swivel

9021 BSPP x Female SAE 37° (JIC) Swivel

9019 BSPP x Female Metric Swivel

9018 Metric x Female BSPP Swivel

9015 BSPP x Female BSPP Swivel

9009 JIC 37° x Female BSP Solid

9034 BSPP x Female BSPT Extended Bushing

9033 BSPP Swivel Cap

9032S BSPT x Female BSPP Swivel

9032 BSPT x Female BSP Solid

9030 BSPP Hex Head Plug

9028 BSPP Countersunk Sealed Plug

9027 Female BSPP Swivel x Female JIC 37° Swivel

9040L BSPP Bulkhead Union Long (includes locknut)

9040 BSPP Bulkhead Union (includes locknut)

9039 BSPP x Female BSP Solid Extended Bushing

9038 BSPP x Female BSP Solid Reducer Bushing

9037 NPTF Male Pipe x Female BSP Solid

9036 BSPP x Female Straight Thread (ORB)

9035 BSPP x NPTF Female Pipe

9051 BSPP x BSPP Adj. 45° Elbow

9050 Female BSPP Swivel 90° Elbow

9047 BSPP x Female BSPP Swivel 45° Tube Elbow

9045 BSPP x Female BSPP Swivel 90° Elbow

9044 Female BSP Solid x NPTF Female Pipe

9043 Female BSP Solid Coupling

9041 BSPP Bulkhead Locknut

9058 JIC 37° x BSPP Adj. 45° Elbow

9057 BSPP x BSPT 90° Elbow

9056 JIC 37° x Female BSPP Swivel 90° Elbow

9055 BSPP x BSPP 90° Elbow



9052 BSPP x BSPP Adj. 90° Elbow

9070 NPTF Male Pipe x BSPP 90° Elbow

9065 JIC 37° x BSPP 90° Elbow

9062 BSPT x Female BSPP Swivel 90° Elbow

9061 BSPP x Female JIC 37° Swivel 90° Elbow

9060 BSPP x Female BSPP Swivel 90° Elbow

9059L JIC 37° x BSPP 90° Elbow Long

9059 JIC 37° x BSPP Adj. 90° Elbow

9080 BSPP Male Tee

9079 BSPP x Straight Thread (ORB) Branch Tee

9078 BSPP x Straight Thread (ORB) Run Tee

9077 BSPP x Straight Thread (ORB) 90° Elbow

9076 Female BSP Solid 90° Elbow


9072 NPTF Male Pipe x Female BSPP Swivel 90° Elbow

9097 Female BSP Solid Cross

9095 Female BSPP Swivel x BSPP Run Tee

9090 BSPP x Female BSPP Swivel Run Tee

9087 BSPP x Female BSPP Swivel Branch Tee

9086 Female BSP Solid Tee

9085 Female BSPP Swivel Tee


9240 JIC 37° x Female BSPP Swivel

9210 JIC 37° x Female BSPP Flat-Face Swivel (HIAB)

9159 JIC 37° x BSPP Adj. Branch Tee

9158 JIC 37° x BSPP Adj. Run Tee

9152 BSPP x BSPP Adj. Branch Tee

9151 BSPP x BSPP Adj. Run Tee

MBSPP BSPP Male Rigid

FBSPX90 BSPP Female Swivel 90° Tube Elbow

FBSPX45 BSPP Female Swivel 45°

FBSPX BSPP Female Swivel

FBFPX BSPP Flat-Face (HIAB) Female Swivel


9259 JIS 30° x BSPP Adj. 90° Elbow


FKOMX Komatsu Female Swivel


6220 Face Seal x Female JIS 30°

© 2008, 2012-2016 Hydraulic Fittings Company, Inc. Printed in the USA

Push-Lock Hose Barbs 9920 BSPP Male Rigid

9915 BSPT Male Rigid

9910 BSPP Female Swivel 90°

9905 BSPP Female Swivel 45°

9900 BSPP Female Swivel

3384 Push-Lock Low Pressure Hose (also available in red, blue, yellow and gray)

9227 Female JIS 30° Swivel Union

9293TP JIS 30° x Female JIS 30° Swivel Test Port Tee

Test Port: M10x1 metric

9005L JIC 37° x BSPP Long

9005EL JIC 37° x BSPP Extra Long

9015TP BSPP x Female BSPP Swivel Test Port Tee

Test Port: BSPP/BSPT

9022F JIC 37° x Female Metric Flat-Face (Solid)

9035S BSPP x NPTF Female Pipe (includes washer & O-ring)

9048 BSPP x Female BSPP Swivel 45° Forged Elbow

9327 Female Komatsu Swivel Union

9326 Female JIC 37° Swivel x Female Komatsu Swivel

FBSPX90B BSPP Female Swivel 90° Block Elbow

9605S JIC x Metric Dual Purpose Light (w/ washer, O-ring)

9606S JIC x Metric Dual Purpose Heavy (w/ washer, O-ring)

9607 NPTF Male x Metric Dual Purpose (Port or Tube)

9622 JIC 37° x Female Metric

9624 Female JIC x Metric Dual Purpose (Port or Tube)

9634TP Komatsu x Fem. Komatsu Swivel Test Port Tee

Test Port: SAE/ORB

9635S Metric (w/ washer, O-ring) x NPTF Female Pipe

9638 Male Metric x Female Metric

9643 NPF Female Pipe x Female Metric

Hydraulic Hose Fittings

MMSP Metric Stand Tube

MMSP45 Metric Stand Tube 45°

MMSP90 Metric Stand Tube 90°

All fittings shown are carbon steel with an anti-corrosive plating

Some fittings also available in stainless steel or brass. Please call for availability.

British and Metric Thread Identification Kit21 metric and 10 British pipe samples in both male and female threads. (ID-Kit)

Visit us online for more information on fittings

www.hydraulax.com

NOTE: A female BSP solid (parallel thread) will mate and seal with either a BSPP (parallel) male or a BSPT (tapered) male.

NOTE: A female BSP solid (parallel thread) will mate and seal with either a BSPP (parallel) male or a BSPT (tapered) male.

JIS 30° Fittings feature a 30° sealing seat and BSPP threads.



Size Chart - Hydraulic Quick Couplers

ISO 16028 HT Series Flush-Face Interchanges with:• Faster FFI Series• Holmbury A Series• Parker FEM Series• Snap-Tite 74 Series

ISO 5675 AG Series AgriculturalInterchanges with:• Faster NS Series• Parker/Pioneer 4000 Series• Safeway S20 Series• Tomco PC Series

ISO 7241-1 Series B 700 Series Hydraulic

Interchanges with:• Aeroquip FD45 Series• Faster HNV Series• Hansen HK Series• Parker 60 Series• Snap-Tite 72 Series

ISO 7241-1 Series A 600 Series HydraulicInterchanges with:• Aeroquip FD56 (5600) Series• Faster ANV Series• Hansen HA15000 Series• Parker 6600 Series• Safeway S56 Series

The fractional (½", ¾", etc.) coupler sizes shown here are nominal only. To identify your existing hydraulic quick couplers, match the male coupler to one of the outlines show below.



Fluid Port and Connector Thread Sizes

Nominal Size

Dash Size

National Pipe Thread

SAE 37° Flare (JIC)

SAE 45° Flare

O-Ring Boss (ORB)

O-Ring Face Seal (ORFS)

Code 61 Flange

Code 62 Flange

Nominal size usually refers to inside pipe diameter or outside tube diameter. With flanges, nominal size refers to port hole diameter.

1/8" -02 1⁄8–27 5⁄16–24 5⁄16–24 5⁄16–243/16" -03 3⁄8–24 3⁄8–24 3⁄8–241/4" -04 1⁄4–18 7⁄16–20 7⁄16–20 7⁄16–20 9⁄16–185/16" -05 1⁄2–20 1⁄2–20 1⁄2–203/8" -06 3⁄8–18 9⁄16–18 5⁄8–18 9⁄16–18 11⁄16–167/16" -07 11⁄16–161/2" -08 1⁄2–14 3⁄4–16 3⁄4–16 3⁄4–16 13⁄16–16 1 3⁄16" 1 1⁄4"5/8" -10 7⁄8–14 7⁄8–14 7⁄8–14 1–143/4" -12 3⁄4–14 1 1⁄16–12 1 1⁄16–14 1 1⁄16–12 1 3⁄16–12 1 1⁄2" 1 5⁄8"7/8" -14 1 3⁄16–12 1 1⁄4–12 1 3⁄16–121" -16 1–111⁄2 1 5⁄16–12 1 3⁄8–12 1 5⁄16–12 1 7⁄16–12 1 3⁄4" 1 7⁄8"1¼" -20 1 1⁄4–111⁄2 1 5⁄8–12 1 5⁄8–12 1 11⁄16–12 2" 2 1⁄8"1½" -24 1 1⁄2–111⁄2 1 7⁄8–12 1 7⁄8–12 2–12 2 3⁄8" 2 1⁄2"2" -32 2–111⁄2 2 1⁄2–12 2 1⁄2–12 2 13⁄16" 3 1⁄8"

NATIONAL PIPE THREADSThere are several variations of pipe threads. Thread forms include the Dryseal American Standard Taper Pipe Thread (NPTF), the National Pipe Straight Threads for Mechanical Joints (NPSM) and the dryseal American Fuel Internal Straight Pipe Thread (NPSF). Each series is normally identified by the abbreviated letter designation.

The NPTF thread is recommended for hydraulic service. This thread series is used on both male and female ends and forms a seal by the interference fit at the root and crest of the mating threads. The NPTF male also has an internal chamfer of 30° which allows it to seal at the seat with female NPSM pipe swivels. The NPSM is a straight pipe thread and sealing is obtained by the mating of the 30° seats of the male and female ends.

FLARED TUBE FITTINGSSAE 37° Flare (JIC): The seal is obtained by the mating of two beveled metal surfaces. The function of the threads is simply to draw these two surfaces together. This style is used particularly in high pressure systems. As illustrated below, both the bevel on the male and the seat in the female are machined to 37°.

SAE 45° Flare: These flared tube fittings are similar to JIC, however the mating surfaces are machined at 45°. These couplings are usually used for low pressure applications such as refrigerant and fuel lines in conjunction with copper tubing which flares easily to 45°.

O-RING CONNECTIONSSAE Straight Thread (O-Ring Boss): This fitting is a modification of the male JIC where the beveled 37° nose has been removed and a groove has been machined between the threads and the hex in which an O-ring is seated. The female is a port which has been tapped to the proper straight thread size and chamfered at the port face to provide an O-ring seat. The seal is made when the O-ring is trapped between port chamfer, thread under-cut, and the male fitting.

O-Ring Face Seal (ORFS): Uses an O-ring (SAE J515) in a groove on the male face side. This is mated to flat face with an O-ring on the female swivel side, forming a seal without metal deformation much the same as an SAE four bolt split flange connection without the bolts. The O-ring face seal connection has been tested to SAE J343 tests and procedures and meets or exceeds SAE J1453 specifications. This connector has proven its superiority in leak resistance, ease of installation, high operating pressure, increased torque tolerance and reusability with its ability to be connected and disconnected frequently.

SAE J518 Four-Bolt Flange: Available in two pressure ratings. Code 61 is referred to as the “standard” series and Code 62 is the “6000 psi” series. The design of both series is the same, but the bolt-hole and flange diameters are different. The female port is unthreaded. The male consists of a flanged head, grooved for an O-ring. The seal is made when the O-ring is compressed between the flange head and the surface surrounding the port.

crimp specifications - discount hydraulic hose specifications remember to always measure your...

Documents