crimp inspection & evaluation

7/31/2019 Crimp Inspection & Evaluation

1/18

Koma x Automation India Pvt.Ltd.Professionals In Advanced Automation

Crimp Inspectionand

Evaluation


2/18


CONTENTS

1.Visual Inspection

2.Insulation Crimp

3.Conductor Crimp


3/18


Both the insulation & conductor are visible in theterminal inspection window


4/18


There Are No Wire Strands Nick.


5/18


The Insulation Has An Even Cut With No Tearing (Jagged Edges)


6/18


Bell Mouths On Conductor Crimp Meets Suppliers Specifications.


7/18


Wire Brush is Visible ,Uniform & Evenly Distributed.


8/18


Insulation Crimp Wings Contacts At Least 180 Degree Of TheInsulation Surface.


9/18


End Of Each Wing Contact The Wire Insulation.(Overlapping Crimp HasEnd Of One Wing In Contact With Insulation)


10/18


None Of The Wings Penetrate The Insulation.


11/18


Crimp Is Symmetrical.


12/18


No Insulation Extruded Between The Wing Gap.Wing Gap Is Not Greater Than 45 Degrees.


13/18


No Round Strand All Strands Are Deformed.Should Be Honey Comb Pattern


14/18


The Crimp Is Symmetrical The Distance Between The Wing Tips IsNot Greater Than The Material Thickness Of the Terminal.

Strands Are Evenly Distributed.

X= 0.25mm


15/18


No Air Gaps In The Conductor Crimps.


16/18


No Cracks Or Breaks In The Terminal Material Normally Linked ToExcessive Extrusion.


17/18


Wings Locked No Gap Between Wings.


18/18


Wings Tips Do Not Contacts Bottom Or Side Of The Terminal.

crimp inspection & evaluation

Documents