creative components for the can-am …lamonster.com/pdf/spy151.pdfcreative components for the can-am...
TRANSCRIPT
Typewritten text
Find the division line between the front nose plastic and the inner
Typewritten text
This is your line to place the plastic screw blocks on by lining them up just to
Typewritten text
first screw block as it is centered between the lower black panel and the color
Typewritten text
place the opposite screw block directly accross from the starter block.
Typewritten text
Typewritten text
Try to balance the blocks from side to side keeping the placement uniform.
Typewritten text
Be sure to push the grilles against the lower blocks before inserting
Typewritten text
the screws. You may have noticed that there are 2 holes in all of the
Typewritten text
blocks and this if for alignment purposes, just choose the one that
Typewritten text
is visable. Put screws in the lower blocks only as the top is wedged
Typewritten text
into place and it will be easy to remove for cleaning. Hold the grille
Typewritten text
against the blocks while installing the screws. Do not over tighten.