creation cc veneering ceramic metal - jensen dental · crea alloy bond is a novel bonding agent...
TRANSCRIPT
-
E N G L I S H
Creation CCVeneering CeramicMetal
W W W . C R E A T I O N - W I L L I G E L L E R . C O M
S I M P L Y B R I L L I A N T
-
S I M P L Y B R I L L I A N T
-
C R E AT I O N C C – technically refined – inspired by nature
Better than ever, more brilliant than ever: Creation CC is a high-fusing metal-ceramic with unique optical and physical properties that has developed constantly in line with growing aesthetic demands – recognized worldwide for 25 years!
The perfectly coordinated ceramic materials have excellent homogeneity and thus guarantee high flexural strength. The result: a densely sintered structure for pure and non-porous layering with the utmost reliability. The pure potash feldspar with micro-pure leucite crystal structure in Creation CC creates iridescent light refraction and natural brilliance and enhances the strength. Exceptional colour nuan-ces can additionally be created with the unique effect materials.The ceramic bonder Crea Alloy Bond also acts as a CTE buffer between metal and ceramic – for improved adhesive properties to non-precious metal and greater colour reliability.
Whether Primus, Starter, Shoulder, Gingiva, Bleach Shades Kit, Kit 1 or 2: With the modular classic brand Creation CC, metal-ceramic restorations can be produced with impressive aesthetics and dimensional stability – for superb dental artistry!
Creation CC – natural brilliance and efficiency.
T H E B R I L L I A N C E O F C R E AT I O N C C :
• Unique, lifelike aesthetics thanks to highly pure potash feldspar
• Resilience due to consistently high flexural strength• Natural colour effect and light dynamics due to leucite
crystals• Ease of handling thanks to consistent colour and layering
system• Processing reliability since 1988
Leucite-reinforced metall-ceramic CC
REM-picture, etched, ceramic surface:
Metalceramic in perfection
-
Everything in balanceAnd the metal goes under cover!
C R E AT I O N C C C R E A PA S T –covering evenly - evenly tight
Creation CC Creapast provides the dental technician with a modern opaque paste which was developed specially for the tried and tested Creation CC system.Efficient consumption - uncomplicated handling: The fine-grain opaque paste can be applied very easily with a brush. The ready-to-use, always homogeneous material allows very even and thin layer application and is thus extremely economical in terms of consumption. Just one condition: the brush should only be slightly moistened.This can be built on individually: The Creation CC Creapast range comprises 16 standard shades, four intensive modifiers and three WOP materials for high-gold alloys with a small melting interval – for greater colour reliability in the final restoration.
Creation CC Creapast – because the background is decisive!
C R E A A L L O Y B O N D – tension-free CTE balance
Crea Alloy Bond is a novel bonding agent which was specially developed for neutralising leaking metallic oxides. At the same time it acts as an efficient CTE buffer between porcelain and metal alloy.Strong bonding – uncomplicated handling: Crea Alloy Bond is a ready-to-use paste material which, with a bonding strength of approx. 70 MPa, provides a secure bond between porcelain and metal alloy. Owing to its excellent physical properties, Crea Alloy Bond achieves a buffer effect. Thus the bonding agent prevents the dispersion of staining metallic oxides and forms a micro-fine neutral layer between metal alloy and porcelain. As a result, it balances out the different coefficients of thermal expansion between metal and porcelain, especially with non-precious metal alloys.The porcelain bonder is also optically convincing: After firing it has a golden yellow appearance – an aesthetically perfect back-ground for high and stable colour reliability!
Crea Alloy Bond – buffer zone between metal and porcelain.
T H E B R I L L I A N C E O F C R E A A L L O Y B O N D :
• Efficient CTE buffer between porcelain and metal alloy• Safety owing to high flexural strength (70 MPa)• No marginal discolorations - staining metallic oxides are neutralised• Greater colour reliability because of the golden yellow undertone• Compatible with all materials from Creation CC and LF
T H E B R I L L I A N C E O F C R E AT I O N C C C R E A PA S T: • Fine-grain opaque paste for a homogeneous surface• Even consistency - working conditions remain the same • Minimal layer thickness leaves more space for layering• Can be perfectly combined with opaque powders• Can be used for multiple indications with Creation CC, LF and CP L&M
-
White is the fashionPink and white in perfection
T H E B R I L L I A N C E O F T H E C R E AT I O N C C B L E A C H S H A D E S K I T:
• Highest aesthetics thanks to true-to-nature light dynamics• High colour accuracy and colour fidelity thanks to high-quality materials• Ease of handling thanks to integrated shade and build-up system• Compatible with all Creation CC materials
T H E B R I L L I A N C E O F T H E C R E AT I O N C C G I N G I VA K I T:
• High-quality gingival shades for perfect pink aesthetics • Compatible with all porcelains from the Creation CC range• Brilliant colour effect owing to non-porous microstructure• Comfortable handling thanks to integrated build-up system
C R E AT I O N C C G I N G I VA K I T – creating a beautifully framed smile
Naturally beautiful gingival reproductions can be created with incredible ease by using the new Creation CC Gingiva Kit.
Whether atrophied alveolar ridges or receding gums: With the gingiva-coloured materials in the new user-friendly Gingiva Kit individually characterised soft tissue zones and an imper-ceptible transition from restored tooth to gingiva are no longer a problem.Seven materials for unlimited possibilities: The six mixable shades purple, dark pink, light pink, flamingo, rose and dark pink opaque as well as the neutral material for individual gradation make it possible to reproduce poorly perfused areas just as well as a large vestibular fornix or small labial fraenum.
Creation CC Gingiva Kit – for natural gingival reproductions.
C R E AT I O N C C B L E A C H S H A D E S K I T – for pearly-white aesthetics
The special Bleach Shades Kit complements the aesthetically versatile range of Creation CC with high-quality shades beyond the conventional colour palette – and for all indications!To embrace the current trend towards very light tooth shades, the Creation CC system has been expanded with its own bleach shades. For instance, they allow technicians to fabricate accurately detailed highlights, perfect shade adaptations of exceptional metal-ceramic work, which are outside the usual shade guide. The ten-part Creation CC Bleach Shades Kit contains a base porcelain perfectly matched to the metal framework, three dentines, one incisal and one shoulder porcelain and the corresponding fluids. They are, of course, compatible with all the ceramics con-tained in the Creation CC system – for individual solutions with impressive colour brilliance.
Creation CC Bleach Shades Kit – uncompromisingly white.
-
The added moisture boost!
Accurate measuring, perfect fixation
T H E B R I L L I A N C E O F T H E L I Q U I D F I R I N G PA D :
• Stable hold on the firing tray• Easy to handle because of proven dispenser design• Safe because of firing stability and optimum heat/warmth build-up onto the object• Economical because of precise measuring• Can be used for all Creation systems
M O I S T U R I N G F L U I D – no more drying out when layering
Long-lasting moisture for all ceramics: the new Moisturing Fluid from Creation is used for extensive restorations and complex correction firings as a moisturising medium for the applied ceramic.The chemical composition of the universal Moisturing Fluid has been adjusted so that it can be used for all ceramic systems from Creation. It is used in addition to the particular modelling fluid being used in order to lengthen the working time of mixed layering ceramics. The ceramic already applied to the frame will not dry out as quickly, becomes more plastic and can therefore be applied more specifically – for more efficiency and preci-sion when layering!
Control moisture level – longer modelling time!
THE BRILLIANCE OF MOISTURING FLUID:
• No more drying out, the ceramics remain consistently modellable• Efficient and simple: one Moisturing Fluid for all ceramics!• Longer working time for mixed materials – especially for sizeable work• Targeted application due to controllable moisture content
L I Q U I D F I R I N G PA D – dimensionally stable and secure
The new liquid firing pad for all Creation systems precisely fixes the object on the fireproof tray. This is because the unique liquid support material hardens completely during the firing process.It is easy to use, the result is simply impressive: The novel firing pad is applied straight from the syringe into the crown or applied onto the pressed ceramic object, then carefully placed on the pin of the firing tray.In the ceramic furnace, the special material completely hardens and thereby stabilises the dental technician‘s work during the firing process – a secure stand including for inlays, onlays, crowns and veneers.Tough yet easy to remove: After firing, the hardened paste can be quickly and completely removed under running water by using an instrument.
Liquid firing pad – stable hold from a syringe.
-
Thomas Sing, MDT
Creation CC
S I M P L Y B R I L L I A N T
-
CREATION CC TRANSITION DENTINE – higher translucency gives deep insight
The Transition Dentines are special ceramics for Creation CC and Creation CP, whose translucency ensures a gentle transition bet-ween dentine and incisal materials – in both anterior and poste-rior restorations.Natural aesthetics from the depths: the complementary Transi-tion Dentines can be used either directly by applying the standard layering technique or as a smooth transitional layer between con-ventional dentine and incisal ceramics or between pressed den-tine cores made of Creation CP and incisal/transparent materials. When using the veneer, inlay and onlay technique, they also en-sure a harmonious colour gradient between natural tooth and restoration.Simple and efficient: The Transition Dentines from Creation have excellent homogenity and provide high and stable shade reliability – for a perfect chameleon effect with depth. The high-quality Transition Dentines, available in one bleach and 16 stan-dard shades, are supplied in individual 20 gram and 50 gram bottles and also as a range in all the shades.Transition Dentines – because naturalness comes from depth!
Metal-ceramic in perfection
T H E B R I L L I A N C E O F T R A N S I T I O N D E N T I N E S :
• Special materials for a natural colour gradient between dentine and incisal• Can be used as a dentine layer in the standard layering technique (Creation Smart)• Compatible with all ceramics in the Creation CC and CP range• Easy to handle because of high stability during modelling• Natural depth effect thanks to increased translucency• Cost-effective working thanks to simplified layering approach
-
Layering technique
Creation Classic
(Dentine)
posterior
Layering technique
Creation Professional
(combination: Dentine and Transition Dentine)
anterior
Layering technique
Creation Smart
(Transition Dentine)
Onlay Application
Veneer Application – labialVeneer Application – incisal
Inlay Application
Dentine
Dentine
Enamel
Transition Dentine
Transition Dentine
Enamel
Enamel
• Dentine• Transition Dentine• Enamel
Application diagram
-
2 in 1 for everything: more brilliance with individual colour effects!
C R E A C O L O R – stains and modifiers for all ceramics
The new CreaColor is a complete “two in one” colour system which can be used to place individual colour nuances simply and efficiently for all ceramic surfaces and materials – whether by the internal or external staining technique.The physical properties of the high-quality stains and modifiers are so perfectly matched to the ceramic surfaces and materials that they can be worked universally with all layering and pressed ceramics, pressed or fired dentine cores as well as zirconium dioxide frames – after all, colour creativity should be unlimited! Furthermore, the new stains are extremely fine-grained and fluorescent and they can readily be mixed with each other.Colour brilliance in two versions: The new CreaColor system was developed in collaboration with Sascha Hein (Oral Designer, Perth, Australia) on the basis of many years of success with Creation Make up Neo ceramic stains and the In Nova Neo mo-difiers. It is made up of two components:
• CreaColor Make up Neo • CreaColor In Nova Neo
T H E B R I L L I A N C E O F C R E A C O L O R :
• Utmost colour brilliance for internal and external colouring• Versatile and efficient: one system for all ceramics!• High colour accuracy and fidelity thanks to high-quality materials• Natural colour effect due to very high fluorescence values • Easy to handle: can be mixed together and can be corrected
M A K E U P N E O –intensive colour character, efficient to use
Perfectly mixed, coloured and corrected: the universally usable stains range Make up Neo from the new CreaColor System is an ideal “ceramics make-up case” for internal and external colouring, but also for admixing to layering ceramics and for characterising zirconium dioxide.The 17 ceramic stains are available in ready-to-use paste form and display a very even consistency or a very fine degree of staining – for thin layer application and a homogeneous ceramic surface.Place colour nuances – naturally beautiful and simple: the 13 paste ceramic glazes have very high fluorescence and colour intensity while the four dentine-coloured glazes provide excellent cover and are ideal for colour corrections and for staining pressed ceramic. Very effective nuances can be placed with the three effect stains – for more in-depth individualisation!
Contents:• 13 stains (MN-F1 to MN-F13) – fluorescent, glazing ceramic stains• 4 shades (MN-FA to MN-FD) – dentine shades in the four Vita® shade groupings for colour corrections and for staining press ingots• 1 fluorescent glaze (GL-F)• 1 stain fluid• 1 stain reconditioner for refreshing dried out ceramic stains
Indications:• Internal staining of pressed or fired dentine cores • External staining of all pressed ceramics• External staining of all layered ceramics • Admixing for intensifying or individualising layered ceramic• Characterising zirconium dioxide (with the aid of Frame Shade FS NT)
Make up Neo universal and individual – down to the smallest detail!
-
C R E AT I O N L F – low fusion point, but highest quality
Versatile and multi-layered: The Creation LF system is ideally suited to veneering all bio- and gold cast alloys in the conventio-nal CTE range. The low-fusing metal ceramic is also an excellent choice as a layering material for the modern pressed ceramics from Creation (Creation CP, CP L&M and Creation Press & Paint on Metal) – for more added value in the laboratory.In addition, the easy-to-process ceramic materials can be used as an add-on material for the Creation CC system.
Creation LF impresses not only with its versatile range of indica-tions but also its extremely natural colour brilliance. The range is perfectly complemented by the unique CreaColor stains and modifier.
Creation LF – even more impact in LF metal-ceramic.
T H E B R I L L I A N C E O F C R E AT I O N L F :
• Low firing temperature (770 °C) for yellow metal-to-ceramic alloys• Reliability due to high flexural strength• Natural abrasion characteristics• Efficient working due to ease of grinding and polishing• More brilliance due to individual colour effects with the CreaColor system
I N N O VA N E O –naturally coloured light dynamics and fluorescence
Strong colours for admixing and staining: CreaColor In Nova Neo is a modern universal modifier which is used with all ceramic ranges. Thus the physically harmonised properties allow universal modification of all layering ceramics.The ten strongly coloured ceramic modifiers can be used to achieve natural fluorescence effects and impressively contribute towards harmonious colour reproduction – without any loss of brightness. The exclusive modifiers are extremely economical and versatile and are used for staining ceramic materials – hence they must not be applied to ceramic surfaces! At the same time they serve to stain zirconium dioxide frames for tooth-coloured shading and for characterising the white or pre-stained zirconium dioxide surface.Interesting colour add-ons in the range: the Crackliner for reproduction of three-dimensional enamel cracks and Illusion for simulating depth effect or for reducing brightness.
Contents:• 10 modifiers – for staining all layering ceramics• 2 effect shades (Crackliner and Illusion) – for individual nuances
Indications:• Admixing for intensifying or individualising layered ceramic• Staining zirconium dioxide frames for tooth-coloured shading and for characterising the white or pre-stained zirconium dioxide surface• Imitation of depth effect and simulation of three-dimensional cracks
The colour “icing on the cake” for frame and ceramic: In Nova Neo!
Constructive arguments for metal-to-ceramic alloys
-
MN-FCM A K E U P N E O
MN-FDM A K E U P N E O MNFRK
INN-1I N N O V A N E O
INN-2I N N O V A N E O
INN-3I N N O V A N E O
INN-4I N N O V A N E O
INN-5I N N O V A N E O
INN-6I N N O V A N E O
INN-7I N N O V A N E O
INN-10I N N O V A N E O
INN-ILI N N O V A N E O
INN-CRLI N N O V A N E O
INN-8I N N O V A N E O
INN-9I N N O V A N E O INF
MN-F1M A K E U P N E O
MN-F2M A K E U P N E O
MN-F3M A K E U P N E O
MN-F4M A K E U P N E O
MN-F5M A K E U P N E O
MN-F6M A K E U P N E O
MN-F7M A K E U P N E O
MN-F8M A K E U P N E O
MN-F9M A K E U P N E O
MN-F10M A K E U P N E O
MN-F11M A K E U P N E O
MN-F12M A K E U P N E O
MN-F13M A K E U P N E O
MN-FAM A K E U P N E O
MN-FBM A K E U P N E O
GL-FM A K E U P N E O
MN-FCM A K E U P N E O
MN-FDM A K E U P N E O MNFRK
INN-1I N N O V A N E O
INN-2I N N O V A N E O
INN-3I N N O V A N E O
INN-4I N N O V A N E O
INN-5I N N O V A N E O
INN-6I N N O V A N E O
INN-7I N N O V A N E O
INN-10I N N O V A N E O
INN-ILI N N O V A N E O
INN-CRLI N N O V A N E O
INN-8I N N O V A N E O
INN-9I N N O V A N E O INF
MN-F1M A K E U P N E O
MN-F2M A K E U P N E O
MN-F3M A K E U P N E O
MN-F4M A K E U P N E O
MN-F5M A K E U P N E O
MN-F6M A K E U P N E O
MN-F7M A K E U P N E O
MN-F8M A K E U P N E O
MN-F9M A K E U P N E O
MN-F10M A K E U P N E O
MN-F11M A K E U P N E O
MN-F12M A K E U P N E O
MN-F13M A K E U P N E O
MN-FAM A K E U P N E O
MN-FBM A K E U P N E O
GL-FM A K E U P N E O
CreaColor Kit | 001200 2 in 1 for everything: more brilliance with individual colour effects
C R E A C O L O R – A S S O R T M E N T
C R E A T I O N C C – A S S O R T M E N T
CC Starter Kit | 000915 Introductory kit with most important tooth shades
ML ML GL UF
CCD-A2
CCD-A3
CCD-A3,5
CCD-B2
CCD-B3
CCE-58
CCE-59
CCCL-0
CCOD-A2
CCOD-A3
CCOD-A3,5
CCOD-B2
CCOD-B3
CCOD-32
CCOD-37
CCOD-43
CCSI-02
CCSI-04
CCNT
CCOT
CCTI-1
CCTI-4
CCTI-5
CCGL
CCHT-52
CCHT-53
CCHT-54
CCMI-63
CCMI-65
A2
A3
A3,5
B2
B3
Alloy Bond
CC Creapast Kit | 000300Complete Opaque Pastes with Modifiers
white
violet
O-A4
O-A3
O-A2
O-A1
ochre
g.yell.
O-C1
O-B4
O-B3
O-B2
O-B1
OM-G
O-D4
O-D3
O-D2
O-C4
O-C3
O-C2
CC Primus Kit | 000051 – Test kit for a selectable tooth shade
CCO-A3
CCD-A3
CCE-59
CCSP-22
CCCL-0
CCOT
CCHT-52
CCOD-A3 ML SPL OL UF
O-A3
CC Shoulder Kit | 001503 – Complete shoulder porcelains
CCSP-21
CCSP-22
CCSP-23
CCSP-27
CCSP-24
CCSP-25
CCSP-26
CCSP-G
CCSP-28
CCSP-29 SPL
CC
CC Gingiva Kit | 001590 – Gingiva coloured porcelains
CCG1
CCG2
CCG3
CCG4
CCG7
CCG5
CCG6
CCOM-G
ML OLOM-GCCGN
CC
ML ML
CCOD-32
CCOD-37
CCOD-41
CCOD-43
CCOD-44
CCHT-56
CCD-CW
CCMI-61
CCMI-62
CCMI-63
CCMI-64
CCMI-65
CCMI-66
CCAD-1
CCAD-2
CCHT-51
CCHT-52
CCHT-53
CCHT-54
CCHT-55
CCPS-0
CCPS-1
CCTI-5
CCPS-2
CCUC
CCKM
CCSI-06
CCSO-10
CCPS-3
CCTI-1
CCTI-2
CCTI-3
CCTI-4
CCSI-01
CCSI-02
CCSI-03
CCSI-04
CCSI-05
CCSO-11
UF
CC
CC
CC Kit 2 | 001508 Effect porcelains kit
OL OLUF
CCO-A1
CCO-A2
CCO-A3
CCO-A3,5
CCO-A4
CCO-B2
CCO-B3
CCO-B4
CCO-C1
CCO-C2
CCO-C3
CCO-C4
CCO-D2
CCO-B1
CCOM-16
CCO-D3
CCO-D4
CCOM-11
CCOM-12
CCOM-13
CCOM-14
CCOM-15
CCOM-17
CCOM-G
CCFOP
CC
CC Opaque Kit | 000800 Complete Opaque Powders with Modifiers
CC
OD-A1CC
OD-A2CC
OD-A3CC
OD-A3,5CC
OD-A4CC
OD-B1CC
OD-B2CC
OD-B3
CC
OD-B4CC
OD-C1CC
OD-C2CC
OD-C3CC
OD-C4CC
OD-D2CC
OD-D3CC
OD-D4
CC
D-A1CC
D-A2CC
D-A3CC
D-A3,5CC
D-A4CC
D-B1CC
D-B2CC
D-B3
CCD-C4
CCD-D2
CCD-D3
CCCL-0
CCOT
CCD-D4
CC
D-B4CC
D-C1CC
D-C2CC
D-C3
CC
E-57CC
E-58CC
E-59CC
E-60CCNT
CCGL
ML ML
GL
CC
CC Kit 1 | 000804 Basic porcelains kit (Dentine, Incisal)
CC Transition Dentine Kit | 000801 Basic porcelains kit (Transition Dentine, Incisal)
ML ML
GL
CCOD-A1
CCOD-A2
CCOD-A3
CCOD-A3,5
CCOD-A4
CCOD-B1
CCOD-B2
CCOD-B3
CCOD-B4
CCOD-C1
CCOD-C2
CCOD-C3
CCOD-C4
CCOD-D2
CCOD-D3
CCOD-D4
CCTD-A1
CCTD-A2
CCTD-A3
CCTD-A3,5
CCTD-A4
CCTD-B1
CCTD-B2
CCTD-B3
CCTD-C4
CCTD-D2
CCTD-D3
CCCL-0
CCOT
CCTD-D4
CCTD-B4
CCTD-C1
CCTD-C2
CCTD-C3
CCE-57
CCE-58
CCE-59
CCE-60
CCNT
CCGL CC
CC Bleach Shades Kit | 000250 – Complete bleach shades
CCBD-A
CCBD-B
CCBD-B0
CCSP-AB
CCE-AB ML SPLO-AB
-
MN-FCM A K E U P N E O
MN-FDM A K E U P N E O MNFRK
INN-1I N N O V A N E O
INN-2I N N O V A N E O
INN-3I N N O V A N E O
INN-4I N N O V A N E O
INN-5I N N O V A N E O
INN-6I N N O V A N E O
INN-7I N N O V A N E O
INN-10I N N O V A N E O
INN-ILI N N O V A N E O
INN-CRLI N N O V A N E O
INN-8I N N O V A N E O
INN-9I N N O V A N E O INF
MN-F1M A K E U P N E O
MN-F2M A K E U P N E O
MN-F3M A K E U P N E O
MN-F4M A K E U P N E O
MN-F5M A K E U P N E O
MN-F6M A K E U P N E O
MN-F7M A K E U P N E O
MN-F8M A K E U P N E O
MN-F9M A K E U P N E O
MN-F10M A K E U P N E O
MN-F11M A K E U P N E O
MN-F12M A K E U P N E O
MN-F13M A K E U P N E O
MN-FAM A K E U P N E O
MN-FBM A K E U P N E O
GL-FM A K E U P N E O
MN-FCM A K E U P N E O
MN-FDM A K E U P N E O MNFRK
INN-1I N N O V A N E O
INN-2I N N O V A N E O
INN-3I N N O V A N E O
INN-4I N N O V A N E O
INN-5I N N O V A N E O
INN-6I N N O V A N E O
INN-7I N N O V A N E O
INN-10I N N O V A N E O
INN-ILI N N O V A N E O
INN-CRLI N N O V A N E O
INN-8I N N O V A N E O
INN-9I N N O V A N E O INF
MN-F1M A K E U P N E O
MN-F2M A K E U P N E O
MN-F3M A K E U P N E O
MN-F4M A K E U P N E O
MN-F5M A K E U P N E O
MN-F6M A K E U P N E O
MN-F7M A K E U P N E O
MN-F8M A K E U P N E O
MN-F9M A K E U P N E O
MN-F10M A K E U P N E O
MN-F11M A K E U P N E O
MN-F12M A K E U P N E O
MN-F13M A K E U P N E O
MN-FAM A K E U P N E O
MN-FBM A K E U P N E O
GL-FM A K E U P N E O
Make up Neo Kit | 001100Glazing and fluorescent stains
C R E A T I O N L F – A S S O R T M E N T
In Nova Neo Kit | 001150All-purpose modifier
LF Kit 2 | 303015Effect porcelains kit
LFSP-22
LFSP-23
LFSP-24
LFSP-25
LFSP-28
LFMI-61
LFMI-63
LFMI-65
LFHT-52
LFHT-53
LFHT-54
LFOD-32
LFOD-37
LFOD-41
LFOD-43
LFOD-44
LFAD-1
LFAD-2
LFG2
LFPS-0
LFPS-3
LFSO-11
LFSI-02
LFSI-04
LFSI-06
LFSO-10
ML ML SPL UF
LF.TI
AV.ZI
LF.TI
AV.ZI
LF Bleach Shades Kit | 302050 – Complete bleach shades
LF Primus Kit | 303025 – Test kit for a selectable tooth shade
ML SPL OL
LFBD-A
LFBD-B
LFBD-B0
LFE-AB
LFSP-AB
LFO-AB
LFO-A3
LFD-A3
LFE-59
LFPS-0
LFCL-0
LFTI-3
LFSP-24
LFOD-32
LFHT-53
ML SPL OL
LFD-A1
LFD-A2
LFD-A3
LFD-A3,5
LFD-A4
LFD-B1
LFD-B2
LFD-B3
LFD-B4
LFD-C1
LFD-C2
LFD-C3
LFD-C4
LFD-D2
LFD-D3
LFD-D4
LFOM-12
LFOM-13
LFOM-16
LFOM-17
OL OL
UF
LFD-A1
LFD-A2
LFD-A3
LFD-A3,5
LFD-A4
LFD-B1
LFD-B2
LFD-B3
LFD-B4
LFD-C1
LFD-C2
LFD-C3
LFD-C4
LFD-D2
LFD-D3
LFD-D4
LFE-57
LFE-58
LFE-59
LFE-60
LFCL-0
LFUC
LFNT
LFOT
LFTI-1
LFTI-3
LFTI-4
LFTI-5
LFGL
ML ML
GL LF.TI
AV.ZI
LF.TI
AV.ZI
LF Kit 1 | 303010Basic porcelains kit (Dentine, Incisal)
-
O P A Q U E D E N T I N E
D E N T I N E
T R A N S I T I O N D E N T I N E
E N A M E L C L E A R T R A N S P A
E F F E C T E N A M E L P E A R L E N A M E L
N E C K T R A N S P A S H O U L D E R P O W D E R SH I G H F L U O R E S C E N T H I G H F L U O R E S C E N T
M A K E I N H I G H F L U O R E S C E N T A P P R O X I M A L D E N T I N EI N T E R N A L P O W D E R
G I N G I V A L O P A Q U E D E N T I N E
BLEACH OPAQUE B L E A C H D E N T I N E TRANSITION D BLEACH EN. BLEACH SHOULDER C O R R E C T I O N P O W D E R
C R E A T I O N C C C O L O R C H A R T
C R E A C O L O R C O L O R C H A R T
MAKE UP NEO
IN NOVA NEO
A1 A2 A3 A3,5 A4 B1 B2 B3 B4 C1 C2 C3 C4 D2 D3 D4O P A Q U E D E N T I N E
A1 A2 A3 A3,5 A4 B1 B2 B3 B4 C1 C2 C3 C4 D2 D3 D4D E N T I N E
TD-A1 TD-A2 TD-A3 TD-3,5 TD-A4 TD-B1 TD-B2 TD-B3 TD-B4 TD-C1 TD-C2 TD-C3 TD-C4 TD-D2 TD-D3 TD-D4T R A N S I T I O N D E N T I N E
57 58 59 60 CL-Oclear
UCwindow
NT neutral
OT opal
TI-01 blue
TI-02 white
TI-03 pink
TI-04 yellow
TI-05 grey
E N A M E L C L E A R T R A N S P A
SI-01 light
yellow
SI-02 mediumyellow
SI-03 heavyyellow
SI-04light
orange
SI-05 mediumorange
SI-06 heavyorange
SO-10blue
SO-11orange
PS-0white
PS-1blue/w.
PS-2flamingo
PS-3orange
E F F E C T E N A M E L P E A R L E N A M E L
HT-51 irides-cent
HT-52 khaki
HT-53 sand
HT-54 honey
HT-55 borde.
HT-56ocher
SP-21neutral
SP-22flamingo
SP-23sand
SP-24gold
SP-25red
brown
SP-26yellowgold
SP-27ivory
SP-28opaqueyellow
SP-29honey
SP-Ggingival
N E C K T R A N S P A S H O U L D E R P O W D E R SH I G H F L U O R E S C E N T H I G H F L U O R E S C E N T
MI-61ivory
MI-62lemon
MI-63honeyyellow
MI-64flamingo
MI-65gold
MI-66olive
AD-1light
yellow
AD-2orange
M A K E I N H I G H F L U O R E S C E N T A P P R O X I M A L D E N T I N EI N T E R N A L P O W D E R
G1purple
G2darkpink
G3light pink
G4flamingo
G5rose
G6 dark pinkopaque
G7violet
G-Nneutral
OD-32 havanna
OD-37 curry
OD-41 orange
OD-43 ivory
OD-44 cuba
G I N G I V A L O P A Q U E D E N T I N E
O-AB BD-A BD-B BD-BO TD-BA S-AB SP-AB KMBLEACH OPAQUE B L E A C H D E N T I N E TRANSITION D BLEACH EN. BLEACH SHOULDER C O R R E C T I O N P O W D E R
MUN-F1white
MUN-F2eggshell
MUN-F3lem. yellow
MUN-F4mandarine
MUN-F5flamingo
MUN-F6apricot
MUN-F7light brown
MUN-F8med. brown
MUN-F9olive
MUN-F10red
MUN-F11blue
MUN-F12grey
MUN-F13deep blue
MUN-FAstain A
MUN-FBstain B
MUN-FCstain C
MUN-FDstain D
MUN-GL-FGlaze
INN-1melone
INN-2rose
INN-3yellow
INN-4r. brown
INN-5brown
INN-6olive
INN-7grey
INN-8blue
INN-9white
INN-10mais
INN-CRLCrackliner
INN-ILIllusion
-
S I M P L Y B R I L L I A N T
-
ww
w.g
anah
ldes
ign.
com
Y O U R L O C A L D E A L E R
S I M P L Y B R I L L I A N T
9106
9103
/13
© C
reat
ion
Willi
Gel
ler
Inte
rnat
iona
l Gm
bH E
rrors
and
prin
ting
erro
rs e
xept
ed. S
ubje
ct to
cha
nges
at a
ny ti
me.
Creation CC – Physical Properties
Property Measure Value Norm
Dentine Firing °C 920 -
Flexural Strength MPa (Nmm2) 84 Min. 50
Thermal Coefficient 10-6xK-1 13,3 ± 0,3 -
Glass transition Temperature °C 580 ± 10 -
Creation LF – Physical Properties
Property Measure Value Norm
Dentine Firing °C 770 -
Flexural Strength MPa (Nmm2) 80 Min. 50
Thermal Coefficient 10-6xK-1 11,4 ± 0,3 -
Glass Transition Temperature °C 510 ± 10 -
DistributorCreation Willi Geller International GmbHKoblacherstraße 3, 6812 Meiningen, AustriaTel. +43 (0)5522 76784, Fax. +43 (0)5522 [email protected], www.creation-willigeller.com
ManufacturerKLEMA Dentalprodukte GmbHKoblacherstr. 3a, 6812 Meiningen, Austria
0483