creating the ‘bubble-swing’ brief create a rotating fairground ride using a battery source
TRANSCRIPT
![Page 1: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/1.jpg)
Creating the ‘Bubble-swing’
Brief
Create a rotating fairground ride using a battery source
![Page 2: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/2.jpg)
The PlansWe decided to use the belt and pulley system, using a bubble
theme
![Page 3: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/3.jpg)
This is one of the bubble seats we designed for the ride.
![Page 4: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/4.jpg)
The blue balls form the main column for our product. This needed to rotate freely.
The yellow balls formed the body and head of our rubber ducky!
![Page 5: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/5.jpg)
We successfully built and tested our electric motor system
![Page 6: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/6.jpg)
This formed the base of our product, we designed it to hide the circuit while allowing easy access to the
switch
![Page 7: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/7.jpg)
Once our bubbles had dried, we glued them together, with a rod inside to hold the column in
place and provide support. The challenge was to make sure the bubbles didn’t cause any friction!
![Page 8: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/8.jpg)
Using a hot glue gun we secured our swing seats in place
This was the final step before putting the product together
![Page 9: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/9.jpg)
End design not in motion
![Page 10: Creating the ‘Bubble-swing’ Brief Create a rotating fairground ride using a battery source](https://reader035.vdocuments.us/reader035/viewer/2022070307/551adc4855034606048b56fa/html5/thumbnails/10.jpg)
This is our final product, the design was simple and effective, resulting in an attractive and successful
ride!