creating a new nrtk profile - survey equipment€¦ · 5 6 7 8 bluetooth f1-next f1-next to search...
TRANSCRIPT
1
2
3
4
Instrument If the Handheld Controller/logger isn't already connected to the GS sensor. Kindly follow the steps to connect. If it is skip to page 3
Connections...
GS connection wizard
Select particular GS Sensor being used F1-Next
Creating a new NRTK profile
5
6
7
8
Bluetooth F1-Next
F1-Next to search for the antenna
F1-Next F4-Search if device not found
F1-Finish Restart Leica Viva SmartWorx from the desktop.
Creating a new NRTK profile
9
10
11
12
Instrument
GPS settings...
RTK rover wizard
“SmartNet Main” “SmartNet Backup” SmartNet is a Network Real-Time Kinematic service
Creating a new NRTK profile
13
14
15
16
Internet
Internal 3.5G modem Use UMTS network if available
- - - - - - - - - -
Using GPRS/CDMA Internet con-nection
Creating a new NRTK profile
17
18
19
20
APN’s: vodafone: internet O2: mobile.o2.co.uk Orange: orangeinternet T-Mobile: general.t-mobile.uk BT Mobile: btmobile.bt.com
Network User ID & Password vodafone: web / web O2: faster / password Orange: blank / blank T-Mobile: user / wap BT Mobile: bt / bt
Either wait for it to test the internet connection, or cancel until the ‘RTK rover wizard’ is complete
SmartNet Main 217.146.121.50 7801 SmartNet BackUp 213.120.255.90 7801
Creating a new NRTK profile
21
22
23
24
Enter mountpoint manually
MAX-RTCMv3 i-Max can be used when the inter-net signal is poor. Change the ‘Network type to i-MAX too. I-MAX-RTCMv3
Receive RTK corrections from RTK Network type: MAX Send GGA message
RTK data format: RTCM v3 Behaviour: “Show only”
Creating a new NRTK profile
81
82
83
84
Go to Work!
Survey
F12 to connect to SmartNet FUNC Connect/Disconnect GSM
Wait for “steering wheel” icon to re-duce to a “cross”. You are now working at 20mm accuracy. Every 6 seconds 2 ticks will appear (SmartCheck).
Survey
“Net1: connected” “Connected to NTRIP caster”