created with mindgenius business 2005® nuclear magnetic resonance spectrometry nuclear magnetic...
TRANSCRIPT
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Nuclear Magnetic Nuclear Magnetic Resonance Spectrometry Resonance Spectrometry
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Nuclear Magnetic Resonance Nuclear Magnetic Resonance Spectrometry Spectrometry
Principles Proton NMR Spectra Other Nuclei Advanced Techniques
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Principles (1)Principles (1)
Nuclear Magnetic Resonance Spectrometry Developed in the 1960’s The study of the absorption of radio waves by a sample in
a magnetic field. Measures transitions in nuclear spin. Samples (1-30mg) are dissolved in a solvent not
containing the type of nucleus of interest
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Principles (2)Principles (2)
Atomic nuclei with an odd number of either protons or neutrons (e.g. 1H, 13C, 31P) have a property called nuclear spin.
Spin induces a local magnetic field around the nucleus to arise -the nucleus behaves like a small magnet.
In an external magnetic field, the nucleus may align with or against the magnetic field. Alignment against the field is a higher energy state than alignment with the field.
External Magnetic Field (H 0 )
Energy
Against (ß spin)
With ( spin)
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Principles (3)Principles (3) Irradiation with the correct
frequency (ν) of radio waves causes the nucleus to “spin-flip” from ground-state (aligned with the field, called α) to the higher energy β spin state (against the applied field).
This absorbs energy (ΔE) and the nucleus is said to be in resonance.
The energy is then released in a variety of complex processes, and the nucleus can relax back to the ground state.
Energy
Against (ß spin)
With (spin)
E = h
Energy Irradiation Relaxation
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Principles (4)Principles (4)ν for any particular nucleus is proportional to ΔE
ΔE depends on atomic identity and local chemical environmentΔE is also proportional to the strength of the applied field (H0)
H0 ranges from 14,100 to 176,250Gauss for modern spectrometers - operating frequencies (ν) normally 60 to 750MHz (based on the resonance of protons in (CH3)4Si or TMS)
Increasing field strength gives increased resolution & better spectra. Modern high-field (>270MHz) machines use a superconducting
magnet and complex hardware and computer software to collate and process the data.
Powerful computers allow more complex data analysis and programming of “pulse” sequences
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Principles (5)Principles (5)
All nuclei are surrounded by electrons, which produce their own magnetic field
Electrons shield the nucleus from the applied field Shielding varies according to the local chemical environment,
because this affects gives rise to variation in electron density and distribution.
Increased electron density gives increased shielding and vice versa
For any particular nucleus
ν field strength felt by nucleus Beff
Beff= Applied field (B0) - local electronic field (Blocal)
.
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Principles (6)Principles (6) ν of chemically different nuclei are different, but not as
different as ν of different atomic types Can do NMR spectrometry of one type of atomic nuclei at a
time. by using a defined range of frequencies suitable for the
type of nuclei to be observed (e.g. the protons in a molecule) a spectrum can be recorded.
Spectrum consists of distinct signals for each type of chemical environment
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Proton NMR Spectra Proton NMR Spectra
Chemical Shift Integration Multiplicity Coupling Constants
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Chemical Shift (1)Chemical Shift (1) ν is measured in Hz and varies with spectrometer frequency
The position of a signal from a particular proton is therefore
measured relative to TMS This is known as chemical shift (δ) in parts per million
(ppm).
δ = Distance from TMS signal (Hz) in ppm Spectrometer frequency (MHz) 1H NMR spectra are normally of the range 0-10ppm (gives a
900 Hz range on a 90MHz machine).
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Chemical Shift (2) Chemical Shift (2) Electronegative Neighbour Atoms: e.g. O, F
1H δ for RCH3 (1-2ppm)< RCH2Br (3-4ppm)< RCH2OH (3.5-4.5ppm)
ALSO: Because hydrogen is more electropositive than carbon, increasing substitution (branching) also gives a downfield shift.i.e 1H d for RCH3 < RR’CH2 < RR’R”CH
Both effects decrease rapidly with distance.
Neighbouring electronegativ
e atoms
Deshielded nucleus
Increased ν needed for resonance
Downfield shift in signal
(increased ppm)
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Chemical Shift (3) Chemical Shift (3) Unsaturated systems: i.e. Alkenes, alkynes
Typical Benzene C-H is at 7-8.5ppmAldehyde (RCHO) protons are observed the furthest downfield (>9.5ppm) as they have an electronegative atom and a double bond.
Amines and Alcohols: RNH2, ROH
Protons attached directly to nitrogen or oxygen give broad, variable position signals, because they become involved in hydrogen-bonding which affects their electron density.
π -bonds have high electron
density
Asymmetric
magnetic fields
AnisotropyDownfield shift
for adjacent protons
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Chemical Shift (4) Chemical Shift (4) Chemical Equivalence : Nuclei in identical environments have the same chemical shifts and therefore give only one signal.
Atoms are said to be chemically equivalent if mentally substituting one of them would give identical results as substituting another. Equivalence can be identified using symmetry:
Plane of symmetry: Atoms that are reflections of each other through a plane of symmetry are equivalent.
Rotational symmetry: Atoms that can be interchanged by rotation about a chemical bond are equivalent (e.g. methyl protons) provided that bond is able to rotate freely.
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Chemical Shift (5) Chemical Shift (5)
Typical Chemical Shifts (1H)
0011223344556677889910101111
δδ/ppm/ppmLow fieldLow field High fieldHigh field
CHCH33SiSi
CHCH33CC
CCHCCH22CC
CHCH33C=CC=C
CHCH33C=OC=O
CHCH33N-N-
CHCH33O, CHO, CH22OO
CHCH22BrBr
CHCH22ClCl
CH0CH022
HC=CHC=C
AromaticAromatic
CONH, NHCONH, NH22
COOH, COOH, Phenol Phenol
OHOH
CH=0CH=0
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Integration Integration
The greater the number of equivalent nuclei giving rise to a particular signal, the larger that signal. By integrating the area under a particular signal we can discern relative numbers of atoms with that particular chemical shift.
e.g.An ethyl group CH3CH2R will give two proton signals for the two groups of protons with an integration ratio of 3:2.
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Multiplicity (1)Multiplicity (1)
Nuclei that are close, but are not equivalent, affect each other’s local magnetic fields. This leads to splitting of signals (spin-spin splitting) The neighbours’ signal will also be split by the original proton, by the same amount.
Rule of thumb: Signals from nuclei with n non-equivalent neighbours are split into n+1 signals.
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Multiplicity (2) Multiplicity (2)
Proton with one non-equivalent neighbourThe neighbour may be in one of two states: α or β. This affects Beff for the proton, giving two
values for ν normally half the molecules in a sample will have the neighbour in state α and half in state βThis gives two equal height signals (a doublet).
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Multiplicity (3)Multiplicity (3)
Proton with two non-equivalent neighboursThe neighbours may be in one of four states: αα or αβ, βα or ββ. As αβ and βα produce the same effect on Beff there are three values for ν This gives three signals (a triplet) in height ratio 1:2:1.
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Multiplicity (4) Multiplicity (4)
Exceptions to n+1 rule More than one set of neighbours must be treated sequentially: leading to complex splitting patterns Protons which are exchanging rapidly in solution e.g. amine or alcohol protons may not couple
All processes which occur faster than about once every half second are “seen” by NMR as averaged. e.g. conformation flipping, rotation of methyl groups
JAC
JAB
H
O
HH
HAC
RO
B
H
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Coupling Constants Coupling Constants The distance between split is known as a coupling constant
(J ) which is measured in Hz These are independent of the external field – hence a high
field magnet gives better resolution
Saturated compounds (alkanes) For coupling to occur the protons must be within three
bonds or less distance from each other. J is about 7Hz
Unsaturated compounds (alkenes, alkynes): They must be within four bonds or less distance
CH2 same carbon J~2Hz CH=CH2 cis J~7-11Hz; CH=CH2 trans J~12-18Hz CH2-CH=CH2 allylic J~2Hz
Aromatic Jortho ~ 6-9Hz, Jmeta~1-3Hz, Jpara~0-1Hz
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Other Nuclei Other Nuclei Carbon NMR Principles as for proton NMR but ΔE is 4x less 12C (~99.5% natural abundance) does not have a nuclear
spin, and so cannot be studied by NMR. 13C has spin (same as 1H) but is only of 1.11% abundance It requires much longer time to acquire a 13C spectrum because two 13C atoms are almost never adjacent 13C-13C
spin coupling is not observed. 13C-1H coupling can be observed, but usually a technique
called decoupling is used to simplify the spectrum by removing splitting.
δ for 13C NMR spectra are affected by the same constraints as for 1H NMR, although the range is of the order 1-200ppm (as opposed to 1-10ppm).
Created with MindGenius Business 2005Created with MindGenius Business 2005®®
Advanced Techniques Advanced Techniques
A few of the more commonly used methods are outlined below: Solvent suppression: pre-irradiates overly large signals to
remove them from the spectrum Spin decoupling: Simplifies the spectrum by removing splitting
of signals – using pre-irradiation of the whole proton region Correlation spectroscopy (COSY): uses a complex pulse pattern
to produce a 3-D spectrum mapping coupling interactions. Nuclear Overhauser Effect Spectroscopy (NOESY): Used to map
through space (rather than along bonding) interactions. Can provide information about spatial arrangement of a molecule.