create new account. use of the winland enviroalert ea800-ip requires an account for remote access...
TRANSCRIPT
Create New Account
Create New Account
• Use of the Winland EnviroAlert EA800-ip requires an account for remote access to:– View real-time sensor data– Modify setting
configurations remotely– Download data logs
• No additional software is required.
Create New Account
• Go to www.ea800ip.com
• Click on “Create an Account”– Each account can host
up to 50,000 consoles.
Create New Account
• You will leave the Winland web site and be transferred to the BAYweb host site.
Create an Account
• Read the Terms of Service.
• Scroll to the bottom to accept the Terms.
Create an Account
• Check the box “I accept…”
• Click “Next” to continue.
• Click “Cancel” to return to the Winland web site.
Create an Account
• Be prepared to create a User ID (typically your email address).
• Password must be at least 5 and up to 20 characters.
• The email address entered here is for Account Contact purposes. Alarm notification is entered at a different point.
Create an Account
• User ID does not accept spaces.
• Security Question requires at least 8 characters.
• Response must be at least 3 characters.
• Check or uncheck the box to receive news and promotional information.
• If you click to visit the Privacy Policy page you will need to re-enter your information to create your account.
• Click “Finish” to save settings.
Create an Account
• Your account must now be validated.
• You will receive an email at the “Account Contact” address.
• Modify your email to accept mail from bayweb.com and check your Junk Mail.
Create an Account
• The Account Validation email will come from [email protected].
• The subject will be BAYweb Account Validation.
• Click on the link in the email and enter your User ID and Validation Code to complete the set up process.
Create an Account
• Account creation is now complete.
• Click on “Home Page” to register new equipment (common starting place).
• You can also use the links in the menu bar on the upper right side of the screen.
• Your account is now created. Here are some common next steps:– Register New Equipment– Connect Wired Sensors and
configure locally– Connect Wired Sensors and
configure remotely