cracking the case: microstamping joshua horwitz educational fund to stop gun violence...
TRANSCRIPT
Cracking the Case:Cracking the Case:
MicrostampingMicrostamping
Joshua HorwitzEducational Fund to Stop Gun Violence
Components of a Cartridge
Components of a Gun
Cartridge Case Ejection
Current Technology: IBIS• Computerized
database• Includes cases and
bullets• Hundreds of
thousands of records
• Finds likely matches in seconds
• Top candidates reviewed by trained examiner
New Technology: Microstamping
Inventors: Todd Lizotte & Orest Ohar Manchester, NH www.NanoMark.com
Firing Pin Detail Example
Tip “Primary” Code
Radial Code: 2nd Counter Measure
Gear Code: 1st Counter Measure
8 Digit CodeSW10
1233
SW10
1233
Breach Face Mark Firing Pin Mark
Gear Code
Head Stamp / Casing
Primer
NanoMark NanoMark TMTM Ballistic ID TagTM
ManufacturingKeeping The Focus On The Physical Evidence. Keeping The Focus On The Physical Evidence. TMTM
MicroStamping Manufacturing Added Cost
Licensed Regional Job Shops(Multiple Sources)
Competitive Pricing & Quality
Licensed Captive Manufacturers
Licensed Captive Manufacturers
Providing Services(Excess Production
Capacity)
$8.50 to $4.00 Per Surface $1.50 to $0.25 Per Surface$4.00 to $1.50 Per Surface
Low Volume / Specialty Firearms Manufacturers
Medium Volume Firearms Manufacturers
Large Volume / Military Firearms Manufacturers
Semi / Fully Automated System*$250,000.00 to $350,000.00
Manual System / $200,000.00
*Lizotte and Ohar developed a new direct write maskless process which has reduced capital costs
Fired Cartridge Casesfrom the
Thompson SMG“Sub Machine Gun”
after 2500 rds.
From a Study by Lucien Haag Presented to the National Academy of Sciences
.45 Cal Cartridges Used
9mm GlockFiring Pin Impression
after1400 rounds
Glock Firing Pinafter
1400 rounds(image reversed)
SEM View at 130X
Fired Cartridge Casesfrom the
Browning 1917A1 MG“MG = Machine Gun”
after 2500 rds.
30-06 Cartridges Used
From a Study by Lucien Haag Presented to the National Academy of Sciences
SEM at 130XNorinco Cartridge
WithMassive Shear
SEM at 130XWinchester Cartridge
after ca. 200 rds.
9mm GlockFiring Pin Impression
after1400 rounds
Glock Firing Pinafter
1400 rounds(image reversed)
From a Study by Lucien Haag Presented to the National Academy of Sciences
SUMMARYBallistic ID Tagging™Glock Project
The scraping action associated withGlock firing pins does not degradethe embossed ID informationafter 1400+ rounds.
Lacquered primers do not presenta problem. Ageing of fired cartridges followed
by cleaning does not presenta problem.
Misfired cartridges and variationsin peak pressure during dischargedo not present a problem.
Primer finish and hardness do not present a problem.
From a Study by Lucien Haag Presented to the National Academy of Sciences