cr95 cr100 cr300t operating manual operating · pdf fileoperating manual operating manual cr95...
TRANSCRIPT
Operatin
g M
an
ual
Operatin
g M
an
ual Cr95
cr100cr300cr300t
1. PRODUCTS DESCRIPTION2. USER CONSIDERATION3. USER OPERATION 4. ACCESSORIES5. MAINTENANCE AND CLEANING & FAULTY RUNNING6. WARRANTY
YANG-CHUN P.O BOX 100, SEOUL, KOREA. 158-600
TEL: 82-31-429-7471/2 FAX:82-31-429-7470 E-MAIL:[email protected]
Operating Manual Operating Manual
Compact Rocker
Cr300t
Cr300
Rockers (W300 X D300mm platform)
Tachometer
Variable wide speed and powerful DC motor provide the gentle motion.
Safe and durable for use at high and low temperature.
All of the rocking platform's moving parts are fitted with
ball bearings for quiet operation and years of trouble free use.
Suitable for continuous operation.
Durable construction enough to load heavy objects.
(CR95 - 5kg, CR100 - 7kg, CR300,CR300t - 10kg)
Cr100
Cr95
Rockers (W290 X D200 platform)
1
PR
OD
UC
T D
ES
CR
IPT
ION
Introduction
* Durable for high temperature ( up to 80 )* Inside incubator
℃
* Variable speed control
* Variable speed control
* Variable speed control* Tachometer - speed display with digital)
Specification
Description
2
SpeedTIME/min
POWER
FINEMOULD PRECISION IND.CO.
FINEMOULD PRECISION IND.CO.
Compact rocKER
Cr300
Platform
Platform
Non-slip pad
Speed controller
Speed controller
TimerRubber foot
Rubber footPower on/off switch
Other RockersRocker-CR95
±7˚
FINEMOULD PRECISION IND.CO.
compact ROCKER Speed
compact ROCKER
Cr95POWER
OFF1
2
3
4
56
Power on/off switch
Silicon pad
±9˚
PR
OD
UC
T D
ES
CR
IPT
ION
Model
Tilt Angle
Speed range
Speed Timer
Dimensions(mm)
Weight
Wattage
Power
Motor
Temp. Resist
Load able Weight
Platform(mm)
Cr100 Cr300 Cr300tCr95
Select control 6steps(12~55 rpm) Variable 0 ~ 70 rpm
DC Warm Geard Motor
- 180min
Lower than 80˚C(Dry air) Lower than 65˚C (Dry air)
10kg 7kg5kg
8.2kg 6.5kg6kg
W290 x D210 x H167 W300 x D300 x H232
W290 x D200 W300 x D300
18W 35W
Free voltage(AC100 ~ 240V)
AC100V / 50/60HzAC110V / 50/60HzAC220V / 50/60HzAC230V / 50/60Hz (CE cert) AC240V / 50/60Hz
V011
110V
220V
Check if the voltage indicated on appliance corresponds to the local mains voltage before you connect the appliance.
Unplug the appliance : - If problems occur during rocking process.- Before you start cleaning the unit.- Never use the appliance if the plug, the cord or the appliance itself is damaged
Be careful not to drop any chemical liquid and wateron the instrument to prolong the life of the instrumentand protect electronic shock.For example, PEG could be reason for peeling off the paint on the surface.
Environmental conditions
- Indoor use.- Environment temperature 5℃ to 40℃.- Maximum relative humidity 80% for temperatures up to 31℃ decreasing linearly to 50% relative humidity at 40℃.- Mains supply voltage fluctuations not to exceed 10% of the nominal voltage.- Other supply voltage fluctuations as stated by the manufacturer. - Transient overvoltages according to installation categories.
3
SpeedTIME/min
POWER
FINEMOULD PRECISION IND.CO.
FINEMOULD PRECISION IND.CO.
Compact Rocker
cr300t39
User consideration
US
ER
CO
NS
IDE
RA
TIO
N
WA
RR
AN
TY
1
2
3
5
This section summarizes operation procedures for FINEPCR`s rockers controlling the rocking movement.
Check the name rating plate for confirming the correct voltage, then plug the power cord into thereceptacle on back of the instrument.
Plug the power cord into the wall receptacle.
Turn the power ON/OFF control buttonto position ON.
4
4
4
POWER
ON
OFF
30
60
90
120
150
180
TIME/min
POWER
ON
OFF
30
60
90
120
150
180
TIME/min
I
O
TIME/min
OFF
30
60
ON
90
120
150
180
Speed
Speed
1
1
2
2
3
3
4
4
5
5
6
6
7
8
9
OFF
OFF
(If the indicating lamp in the switch is not working, Please check whether the main electric socket is connected firmly with the main body or the timer was pointed at the ON.)
Control the working time as your request.
Control the setting rotating speed.CR100, CR300, Cr300t (0 ~ 50rpm)
CR95
Others
Control the setting rotating speed.CR95 (4, 8, 12,16, 28, 32rpm)
User operation
US
ER
OP
ER
AT
ION
Cr95
Accessories
53
Cr100
Cr300 / Cr300t
AC
CE
SS
OR
IES
TY-95 (Second Platform)DP95 (Dimpled Pad)
TY-100 (Second Platform)DP100 (Dimpled Pad)
TY-300 (Second Platform)DP300 (Dimpled Pad)
* Elastic ties for holding flasks and tubes easily.
UP400 (Upper Platform) 400 X 400 mm
The method of the Tray combination
1. Insert the 4 Screws in the corner holes of the Platform.
2. Tighten up the 4 legs using the above Screws.
3. Unscrew the Mount knobs from the Legs and insert tighten up the 4 Mount knobs.
Note ; When you use this Rocker as a second platform, the Mount Knobs are always tightened on the Leg threads in order not to lose.
Screw
Second Platform
Leg
Thread
Platform
Mount Knob
The platform could be used as a shelfon a desk.
6
User operation
US
ER
OP
ER
AT
ION
Always unplug the instrument before you start cleaning it.
Never immerse the appliance in water.
7
Never use the instrument if the plug, the cord or the instrument itself is damaged.
The equipment is maintenance-free.
Clean the surfaces of the rocker
. Water containing a surfactant detergent additive.
. Isopropylalcohol
. Turn the power ON/OFF control button to position OFF
. Pull the mains plug off
. Clean the surfaces of the Rocker
1. After turning on the power switch, The units does not working. Please, Checking the electronic fuse.
Be able to find a fuse box on the back of the instrument, After departing the fuse box, It could be very easy to change the fuse with new one.
If the equipment have other defects, It should be informed to an authorised servicing agent.
spare fuse
remove used fuse
Maintenance and Cleaning
Faulty running
MA
INT
EN
AN
CE
AN
D C
LE
AN
ING
& F
AU
LTY
RU
NN
ING
1 YEAR WARRANTY
Limited Warranty :
This equipment has been tested all the functions and parts for proper operation before shipment.Please read this manual carefully. If you have any questions or problems, check with your dealer or write us direct. This equipment is warranted for a period of 1years from date of purchase against defects in workmanship and material only. If a system component should ever fail to work perfectly, It can be repaired or replaced by our after-sales service without difficulty.
Model#:
Serial# :
Date Purchased :
Dealer Name :
City and Country :
YANG-CHUN P.O BOX 100, SEOUL, KOREA. 158-600
TEL: 82-31-429-7471/2 FAX:82-31-429-7470 E-MAIL:[email protected]
WA
RR
AN
TY
Warranty