cpl business exhibit.pdf
TRANSCRIPT
-
7/23/2019 CPL business exhibit.pdf
1/18
CPL CONCORDIA I business exhibit
-
7/23/2019 CPL business exhibit.pdf
2/18
CPL CONCORDIA operates in the whole world of energy: energy
management, sale and distribution of methane gas and GPL, e-services,
information technology, building automation, construction and
maintenance of networks for electrical energy, water and gas. The initials
CPL mean Cooperativa di Produzione Lavoro [Cooperative of Work
Production]. CPL was formed in Concordia, in provincia di Modena, in
1899 with the objective of guaranteeing work to a group of labourers
and it grew progressively right up until the present arrangement.
Today CPL Concordia is a Group composed of 27 companies (betweencontrolled companies and associatedcompanies) and operates in Italy,
Spain, Greece, Romania and Croatia, Tunisia, Algeria and Argentine.
Numbers
27 companies 312 million euro of turnover
1400 employees 110 years of history
14 major offices and 25 offices
company profile
-
7/23/2019 CPL business exhibit.pdf
3/18
Mission
CPL means Cooperativa di Produzione Lavoro (Cooperative for the
Generation of Work). For 110 years our mission has been to generate
real work: work that is regulated and safe and that values people and
their characteristics. Work that gives dignity to those who
perform it and that allows them to grow professionally and as a person.
Work
that becomes a valuable contribution to society. Work that is performedto the
best of our ability with professionalism and consistency.
-
7/23/2019 CPL business exhibit.pdf
4/18
Activities
ENERGY
Energy Service
Global Service
Cogeneration system
Trigeneration system
Photovoltaic system
Solar energy Geothermic energy
Biogas energy
Air conditioning
Public lighting
-
7/23/2019 CPL business exhibit.pdf
5/18
Activities
GAS
Distribution
Selling
Decompression chambers
Reduction gears
Gpl warehouse
Odorisation Cathode protection
Search of gas escape
Measurement and correction
Metrological laboratory
Total Data Service
Automotive CNG
-
7/23/2019 CPL business exhibit.pdf
6/18
Activities
NETWORK
Methane gas networks
Gpl networks
Water networks
Network inspection
Drain
Anti-incendiary networks Electrical supply lines
Data lines
District heating networks
-
7/23/2019 CPL business exhibit.pdf
7/18
Activities
ICT
ERP solutions
Web services
Billing/networks software
CMS
Call/Contact center
Domotics Video surveillance
Access control
Plants remote control
Telematic reading of gas meters
-
7/23/2019 CPL business exhibit.pdf
8/18
profile of CPL CONCORDIAs plans department
Design
GAS DECOMPRESSION STATION DESIGN
Specifications of the system and calculation of all the
equipment (speed, enthalpy, pressure drop in the pipelines
and equipment, and noise level) and the structures containing
them.
Drawing up the straight line flowchart according to the
assembly order and the equipment key. Executing the piping and installation prefabrication drawings.
BUILDINGS FOR HOUSING THE EQUIPMENT
Execution and preparation of a graphic drawing of the building
concession.
Environmental impact and noise level study.
Procedures for obtaining any necessary government, state
property office, consortium authorizations, etc.
-
7/23/2019 CPL business exhibit.pdf
9/18
HANDLING PROCEDURES
Examination of the plan. This consists of a descriptive report
and graphic drawings of the area, building, heating plant,
equipment, electrical system, and lightning conductors.
Preparation of the testing documentation and the
documentation for obtaining the Fire Prevention Certificate.
Request for examination of the plan of the heating plant
preheating system, with a report containing calculations with
a functional diagram. Planning electrical systems in zones where there is a danger
of explosion, and preparation of procedures.
Specifications and homologation of vessels requiring
the stamp.
Designing skids for injection systems in accordance with
the destination countrys standards.
Execution of the procedures necessary for obtaining authorization
for the storage and use of toxic gases or inflammable liquids.
-
7/23/2019 CPL business exhibit.pdf
10/18
Design
GAS DECOMPRESSION STATIONS
Preparation of the area.
Building of station (a prefabricated structure).
Assembly and installation of the decompression, preheating,
measurement, and odorization equipment.
Supplying and installation of correction, printout, remote
reading,and remote control electronic systems.
Installation of electrical system and protection system
for atmospheric discharges.
Startup and calibrations.
Revamping, improvements, and adaptations carried out, with
continuity of supply guaranteed by portable reduction units
that have been homologated by SNAM on a national scale.
-
7/23/2019 CPL business exhibit.pdf
11/18
FINAL REDUCTION UNITS
Construction and installation of the final reduction units for
domestic and industrial customers.
Revamping and adaptation of systems, with continuity of
supply guaranteed by a temporary bypass unit.
Plugger used to intercept medium pressure pipelines.
INDUSTRIAL NETWORKS
Gas decompression stations where gas is receivedand measured, and the pressure is reduced.
Above-ground and underground networks for gas supply
and distribution.
Fire fighting networks.
Diathermic oil, vapor networks.
Compression systems for methane gas that is used to power
turbogenerators or that is used at operating pressures
that are higher than the delivery pressures.
-
7/23/2019 CPL business exhibit.pdf
12/18
LPG PLANTS
Construction of distribution systems
Storages of underground buried tanks featuring a 5 to 200 mc
capacity range
Vaporization plants and transfer of liquid phase
Propane-air mixing systems, capacity range 1,000 to 20,000
kgms/hour
ELECTRONIC CORRECTION AND REMOTE CONTROL Installation and activation of fiscal measurement system and
correction system.
Remote control systems, with installation of electropneumatic
equipment and electric safety systems, testing, calibrations,
and simulations.
-
7/23/2019 CPL business exhibit.pdf
13/18
CATHODE PROTECTION SYSTEMS
Construction of active cathode protection systems, with
automatic or semiautomatic power supply units and
impressed current anode ground plate in a flat position on the
ground or a vertical position in a hole.
Installation of protection system for structures with low power
consumption: special power supply units for industrial use or
meltable magnesium anodes.
-
7/23/2019 CPL business exhibit.pdf
14/18
Services
GAS DECOMPRESSION STATIONS AND REDUCTION UNITS
Routine or emergency service for first and second step
reduction lines, including maintenance of the equipment
and replacement of the worn parts or the entire spare parts
kit, in accordance with current standards.
Using inert gas to test and calibrate safety or vent valves.
Maintenance and cleaning of the preheating system or thecorresponding thermoregulation sensors.
Initial field inspections of the measurement chain
and subsequent calibrations carried out according to the
requirements of the Metric Bureau.
-
7/23/2019 CPL business exhibit.pdf
15/18
SEARCH FOR GAS AND WATER LEAKS
Systematic search for leaks in underground gas networks
with devices having a sensitivity of one part per million
of hydrocarbons in the air.
Check of the water network leaks by means of a sound
wave correlator or a geophone able to detect filtered noise
and vibrations at the sites of the leaks.
A check to ensure that the cathode protection system is in
good working order by means of continuous recordingsand readings that monitor the immunity threshold of
the protected system.
Locating the sites of current loss or contacts with
other structures to limit the active current and guarantee
the optimization of the cathode protection system.
-
7/23/2019 CPL business exhibit.pdf
16/18
GAS CHROMATOGRAPHY ANALYSES
Measurement and certification of the calorific value of the
methane gas supplied.
Verification and certification of the odorization rate.
AVAILABILITY
The service is available 24 hours a day and is guaranteed
by technicians who have the expertise to deal with any type
of problem or emergency. Networks equipped with remote control that are monitored by
means of systems developed by CPL CONCORDIA can be
serviced even more quickly.
-
7/23/2019 CPL business exhibit.pdf
17/18
SERVICE IN CONNECTION WITH CONTRACTS
Management of the technical-economic relationship to
determine the flow rates requie and the daily flow rate
requirements for the different types of SNAM contracts.
Calculation of the charges in relation to the different parameters,
with revisions due to current regulations and availability of the
contracts.
-
7/23/2019 CPL business exhibit.pdf
18/18
CPL CONCORDIA Soc. Coop.Via A. Grandi, 39 - 41033 Concordia sulla Secchia (MO)
tel. +39.0535.616.111 - fax [email protected] - www.cpl.it