cost saving, comfortable, smart - utas 2013eng.pdf · 2e4 7 $4g i8 4 8 a network based integrated...
TRANSCRIPT
Cost Saving, Comfortable, Smart
Conference Room, Lecture Room, Auditorium, Control Room,
Home, Building, AV Room Integrated Automation Solution
Smart Building, Smart Home Solution
“The leading company of Life style Solution, innovating cutting-edge technology the way people live and work.”
2
Ubiquitous and smart technologies that enable remote control and maintenance of devices anytime anywhere are now implemented even in video, audio, lighting, curtain and HVAC facility industries. With the accelerated convergence between IT technologies and other industries like automation, security and safety facility, the customers’ demand is increasing together with the increasing total cost of system operation and maintenance. UTAS has hands-on experiences through which it has performed a number of AV equipment automation and security projects for local and overseas housings, commercial facilities and buildings for a good number of years. Based on this experience, the Company has developed technologies for the IP-based integrated automation products (including touch panel, smart network controller, extender, software for integrated operation) that can significantly save the total cost. The Company shall continue to strive to become a company that grows together with its customers, by offering products and solutions of high level of satisfaction at reasonable price through continuous research and development.
Manufacture of wire/wireless touch panel, network controller and extender
UI/UX authoring tool (software) for smart phone and tablet PC
Integrated management solution for apartment and building
Automation solution for smart building
Fire analysis and treatment system for forest fire and fire detection
Auxiliary device for information and communications – environment control system, special keyboard
Wire/wireless communication technology – Zigbee, 6LowPAN, WiFi, Ethernet communication module
Embedded Software – Embedded Windows, Android OS porting, driver and application
Embedded Hardware – Microcontroller, ARM9, ARM11, Cortex system
Home appliance control – IR Database based remote control for TV, AMP, STB, Player, air conditioner and cooler/heater
Control and monitoring of AV facility – AV facility for building such as Pro Audio, AV Matrix, AV Switcher
Control and monitoring of RS232/485 light & dimmer – LED, halogen, fluorescent lamps
Control and monitoring of DMX512 device – special light, stage light, LED
Control and monitoring of electric curtain – curtain, blind, batten, elevation
Control and monitoring of HVAC facility – freezing, cooking, heating, ventilation, power, Digital I/O
UI/UX authoring tool for smart phone and table PC – Android, iOS, Embedded Windows
Integrated management software for smart home and smart building – integrated control, monitoring and scheduling
Business
Core Technologies
3
Integrated Automation System for AV Facilities
Optimization of operation environment through system integration
Initial setup cost saving without an equipment overlapped
Minimization of system malfunction through automation
Minimization of maintenance cost through integrated operation
Energy cost saving by scheduling function
Convenience through User-friendly customized UI editing tool
4
The network based IT convergence for integrated automation system using smart phone, smart pad, touch panel and PC is useful in integrated monitoring and control of video, audio, light, curtain and HVAC devices for companies, schools, government offices, religious institutions, home and transportation devices. The Company offers a wide range of customized services to your needs.By offering the unique UTAS two-way communication based integrated automation solutions that are optimized for user environment to ensure simplicity, efficiency, practicability and scalability, the optimization is realized in unmanned system, system life extension, user operation environ-ment, minimization of cause of error, reduction in recovery cost and maintenance.
Building Automation System
Smart Home Solution
Auxiliary Device for Information and Communications
5
This is an integrated operation system for the operation of user customized multi facilities, which enable all the devices within a building to interwork through the ultra compact wireless communication device and web for WoT (Web of Things). By the light-weight built-in web server or fitting the same to the devices within a building, and by integrating these into a set of network with the IP based wireless communication, information of the devices can be monitored via web. And by the convergence of such information and providing optimized services to the users, a significant amount of the building operation costs and energy costs can be saved. This is the state-of-the-art system applicable to both existing and new buildings.
Smart and convenient living environment can be realized for apartments and individual houses by the integrated control system customized to each user to control TV, audio, air conditioner, heater, curtain and light. With the setting function to various scenarios such as ‘Wake up’, ‘Sleep’, ‘Go out’, ‘Watch film’, ‘Dinner’, you can create the mode of your choice at a single touch. Monitoring and control of your home is also enabled remotely using smart pad or smart phone.
The Company offers a big sized special keyboard with the large sized key button for users with disability. Users suffering hand shaking or upper arm disorders now can obtain information easily from PC making their life a little easier. UTAS system can be applied to promote convenience for the disabled so that they could enjoy the easy integrated control of various auxiliary and AV devices using their smart pad, smart phone, PC or exclusive touch panel.
Applications
Corporate Enterprise
Conference Room
Video Conference Room
Auditorium
Enterprise Broadcasting Operation System
TaeguTec Conference Room
Lotte chemical Video Conference Room
Medison Building Conference Room
DongKuk Steel Video Conference RoomSK chemical Auditorium
Hyundai heavy industries Asan Memorial Hall
Busan University Hospital Conference Room
KT Conference Room
6
Not only screen, projector, AV equipment, light, curtain etc in meeting room, auditori-um or office can be individually controlled, but also the presenter can control the system with one-touch in various circumstances and applications (such as presenta-tion, meeting, discussion, video mode etc) through the customized programming.Even a complicated conference meeting system can be controlled with one-touch, and a perfect video conference system can be realized by the speaker tracking system. The remote monitoring and the integrated automation for light, curtain, sound and HVAC facilities of a building can reduce costs of maintenance and labor, and also energy through the overall power management.
Any company with a national network of branches and runs the enterprise broadcast-ing system such as insurance companies and communication companies, can benefit from the integrated enterprise broadcasting system that enables the central PC to control TVs and STBs of the nationwide branches. These can be controlled and monitored globally, by group, by branch or by schedule. As long as there is an enterprise network, the system can be easily implemented without the need of extra cabling or wiring works, and since the system does not require administrator for each branch, companies can achieve a great amount of cost saving on system implemen-tation and maintenance.
Residential
Home Theater Room
Apartment
Villa
Hotel & Resort
Smart Home
Villa Home Theater Room
Villa Home Theater Room
Puket -Mai Khao Dream Villa Home Theater Exhibition Room
APT Home Theater Room
APT Home Theater Room
Alpensia Resort
Villa Home Theater Room
7
Smart and convenient living environment can be realized for apartments and individual houses by the integrated control system customized to each user to control TV, audio, air conditioner, heater, curtain and light. With the setting function to various scenarios such as ‘Wake up’, ‘Sleep’, ‘Go out’, ‘Watch film’, ‘Dinner’ you can create the mode of your choice at a single touch.
Convenient and pleasant home entertainment environment can be realized by the integrated home AV automation system that interworks with all AV equip-ment, light and curtain.
Monitoring and control of your home though the integrated WiFi based automa-tion system is also enabled remotely using smart pad or smart phone.
Guests of hotels and resorts can individually control video, audio, light, air conditioner and heater for their room, and the central control room can also control and monitor the entire rooms using the network system.
Applications
Education
School
Campus
Training Institute
Smart Lecture Room
Web based multi-class room integrated control system
Lecture recording & Lecturer tracking system
8
A network based integrated operation system can be implemented to the broadcasting system at schools, lecture rooms at universities and corporate training centers, to enable monitoring and remote control individually or globally through the two-way communication. In this way, the optimized lecturing system is realized for lecturers, and efficient management and operation is available for administrators.
The Company is able to supply and implement the customized products and programs to meet the requirements of specialized systems such as smart classrooms and state-of-the-art lecture rooms.
Government
Administrative Institutions
Court Room
Military organizations
Control Center
Exhibit Hall
9
The system can be optimized for operation so that the operators are enabled to easily and efficiently operate a number of complicated equip-ment in the meeting room, auditorium of administrative or military organiza-tions, electronic court, situation room, control center etc.
The Company offers the system stability, flexibility for scalability require-ments and quick maintenance to meet the unique characteristics of government offices where security and stability are essential.
Applications
Religious Institutions
Jinju Chodae Church Saebat Church
Gyeojassi Church
CCC Memorial Hall The Share Happy Presbyterian ChurchRev. Son Yang-Won Memorial Hall
Chapel
The Worship Hall
Memorial Hall
Smart Worship System
10
Effective and convenient worship services can be realized, and efficient facility management and energy saving can be achieved through the fully automated system that controls broadcasting, audio, video, light, temperature and curtain systems of chapel and education room for churches of all sizes.
By adding the integrated automation system to the multi display system of large churches, the religious service system can be improved, and together with the scenario setting mode program, various effects can be added to services and events.
Limousine
Camping Car Camping Car Inside
Limousine Control
Luxury Transportation
Limousine, Limousine Bus
Camping car
Yacht
Smart Control
11
Luxury transportation such as limousine, camping car, yacht etc are like the second home or an office to the user. By implementing the UTAS Integrated Automation system, users can have added convenience like they would have at home.
Users can control various AV devices, light, curtain and electric seats inside the vehicle. Using the mode setting function, a single touch can realize the environment and mood of your choice. By fixing an exclusive touch panel or using the smart phone or smart pad, you can configure the UI screen to your taste.
Applications
Building
HVAC Facilities Automation
Monitoring and Control
WoT based Integrated Automation System
Smart Building
12
The remote monitoring and the integrated automation for light, curtain, sound and HVAC facilities of a building can reduce costs of facility maintenance and labor, and also energy through the overall power management.
A customized multi facility operation system can be implemented to enable all the devices within a building to interwork through the ultra compact wireless communication device and web for WoT (Web of Things).
By the light-weight built-in embedded web server or fitting the same to the devices within a building, and by integrating these into a set of network with the IP based wireless communication, information of the devices can be monitored via web. And by the convergence of such information and providing optimized services to the users, a significant amount of the building operation costs and energy costs can be saved. This is the state-of-the-art system applicable to both existing and new buildings.
Gwacheon Community Rehabilitation CenterNational Rehabilitation Center
Auxiliary Devices ShowroomSeoul Community Rehabilitation Center2009 Seoul Senior EXPO
Rehabilitation Center ShowroomBusan Community Rehabilitation CenterSeoul Community Rehabilitation Center Snoezelen Room
Welfare Facilities
Rehabilitation Center
Special school
Auxiliary Devices Control
Smart Room
Special Keyboard – PalmOn Keyboard (UPK100DX)
13
Various auxiliary devices and rehabilitation facilities at welfare centers for the disabled, rehabilitation centers, special schools and assistive technology centers, such as electric bed, ceiling type rail lift, electric sink etc can be controlled fully and easily by the use of smart pad, smart phone, PC or exclusive touch panel.
A show room that interworks with demo equipment of each facility can be constructed to demonstrate the performance of effective auxiliary devices, and the application in real life of the disabled will improve convenience for the disabled whose activities are limited by their disability.
As a part of the public campaign supported by the Ministry of Security and Public Administration, National Information Society Agency and local govern-ment for the provision of auxiliary devices for information and communications for the disabled, the Company has developed, and is manufacturing and distributing a big sized special keyboard with the large sized key buttons. Users suffering hand shaking or upper arm disorders now can obtain informa-tion easily from PC making their life a little easier.
Integrated Automation System for AV Facilities
This is a system facilitating smart pad, smart phone and smart network controller to control target devices via Wi-Fi communication.
The smart network controller has the built-in AP function facilitating the connection directly via Wi-Fi to smart pad or smart phone without the use of additional wireless router or gateway.
The system can work with both Android and iOS based smart pad/phones.
A separate extender may be installed to extend the Wi-Fi range in case the smart pad/phone/network controller is outside the wireless Wi-Fi range.
Multi Extender (WMC300) can be added to extend the scope of control depending on the scope of control and the number of devices to control.
Using the Android/iOS App Program – UX Loader, can produce and implement an UI program that is most suitable for the user’s requirements.
By displaying the operational status of the smart network controller on UI of the smart pad, status of each device can be monitored.
By allocating a fixed IP to the smart network controller, or by connecting to an external AP in case of the DDNS network, a remote control using the smart pad/phone is enabled.
Wi-Fi based Integrated Automation System for AV Facilities
This is a system used to control remote devices via LAN network through the PC based integrated operation program and CMS program.
The PC based integrated operation program is connected to the smart network controller and CMS program is connected to the LAN Multi Converter via network communication.
The smart network controller is connected to Multi Extender via Wi-Fi, LAN, RS485, and Multi Extender then is connected to devices using the wire to
control them in IR, Relay, Serial methods.
The PC based integrated operation program is suitable for the integrated management system at buildings, lecture rooms, corporate training center, resort complex etc for efficient system
management and operation. Since it is produced in the form of customized UI, it enables the administrator to easily and conveniently control and monitor a number of devices.
The CMS program is exclusively made for the integrated operation of enterprise broadcasting system; it is used to control TV and STB of each branch via a network, and monitor the power status
of each device through the LAN multi converter. Since it does not require additional cabling works, but uses a private IP, it can save the system implementation and network maintenance costs.
LAN based Integrated Automation System for AV Facilities
This is a system used to control devices using 3.5” mobile touch panel and 7” built-in type touch panel.
The touch panel and the RF Extender are used to control devices through the RF communication compliant to 2.4GHz (Zigbee) bandwidth.
Comes in two types of controllers to select from; one that IR, Relay or Serial individual controller and the other in rack type integrated controller,
depending on the type of site circumstance and the number of devices to be controlled.
In case the RF communication distance is shortened by obstacles etc, use of a converter facilitating LAN communication or RF repeater can extend the distance.
Using the AV Processor, various functions such as RGB selection, USB selection, audio selection, volume control etc can be enabled.
Using the UIPC Editor Program exclusive for touch panels, an UI program most suitable to the user’s requirements can be created and implemented.
RF based Integrated Automation System for AV Facilities
14
Block diagram of Integrated Automation System for AV Facilities
Wi-Fi based System
Android Smart Pad/Phone
GWC2000
GWC3000
LMC150
UXR1000
AV Processor LMC100A RPT100A
IRE200A RLE400A RSE500A
LMC200
iOS Pad/Phone
Smart Network Controller
TV AV Receiver
Bluray Player Settop Box
Elevation Power Distributor
Screen Blind
Projector Light
Matrix Switcher DSP
WMC300
LMC300
RMC300
Multi Extender
LAN Multi Converter
RF Controller
LAN based System
PC based Integrated Operation Program
CMS(GBS Manager) Program
RF based System
7” Touch Panel / BX7000LAN
3.5” Mobile Touch Panel / UX3500
IR Device
Relay Device
Serial Device
GWC1000GWC Extender
G
15
Products
User Interfaces
UX3500 - Mobile RF Touch Panel
3.5 inch Touch Screen LCD Display
Various control method : IR, Relay, RS232
Edit the screen by using UIPC Editor
Addressable channel/ ID setup for multi-zone and same model’s devices
2.4GHz RF(Zigbee) operation support
Powerful IR learning function, IR code library
Dedicated Macro function, Convenient Timer function
Convenient touch screen and external hard buttons
PC-based DB management & record
UX3000 - Mobile IR Touch Panel
3.5 inch Touch Screen LCD Display
Control method : IR
Edit the screen by using UIPC Editor
Addressable channel/ ID setup for multi-zone and same model’s devices
Powerful IR learning function, IR code library
Dedicated Macro function, Convenient Timer function
Convenient touch screen and external hard buttons
PC-based DB management & record
BX7000LAN - Built-in Type RF Touch Panel
7 inch wide touch screen LCD display
Wall mountable or Desk mountable type
Various control method : IR, Relay, RS232
Edit the screen by using UIPC Editor
2.4GHz RF(Zigbee) operation support
PC or Smart Pad/Phone linked Network Gateway function
TCP/IP Ethernet communication
Serial two-way communication [option]
Addressable channel/ ID setup for multi-zone and same model’s devices
Compatible with all Android based smart pads and smart phones
Compatible with all iPad, iPhone and iOS based smart pads and
smart phones
System control through Wi-Fi communication
Exclusive APP for smart pad and smart phone – UI screen, data
setup and edit using UX Loader program
System control with touch monitor or general monitor with the
installation of CMS program exclusive for PC
System installable to any PC (CPU Pentium 4 or higher)
System control through TCP/IP network communication
Comparisons of Specifications as per Touch Panel model
Model
UX3500
UX3000
ITRC8500DX
ITRC7700DX
BX7000
BX7000LAN
3.5" 7" PCeditor
Touch panel Program
Wallmountable
Deskmountable IR RF RS232 TCP/IP
LCD Size Type UI Setup
Mobile
Communication signal
GWC3000- Multi Smart Network Controller
SpecificationsFeatures
Smart Network Controller
Supports various control methods including IR, Relay, Serial etc
Enables TCP/IP network such as Wi-Fi, Ethernet (WAN, LAN)
and mode settings such as AP, Gateway, WDS etc
Enables extended control range by connecting a multi extender to the network
Enables the OS program update through the USB Host and Device ports
Enables power supply (also works as a DC adapter) only through the UTP cable
with the PoE method
Enables to detect sensor signals lower than DC24V with the Digital In port
(this also enables the dry contact when additional switching work is carried out)
IR Learning function (by connecting to an exclusive edit program)
Enables the interwork with an RF Extender with 2.4GHz RF
5 IR ports, 5 Relay ports, 2 RS232 ports, 1 RS485 port
1 USB Host port, 1 USB Device port
1 WAN port (PoE In), 1 LAN port
2 Digital In ports (terminal block 1, 2, G type)
1 Photo Diode for IR Learning
16 Ch and RF channels for 16 IDs
(to be set from the exclusive edit program)
Using external RF antenna and Wi-Fi antenna
DC 12V/1.5A adapter / also works with PoE
18
GWC3000 – Multi Smart Network Controller is a multi controller used for individual control of device by converting the control commands sent by the exclusive UI program via TCP/IP network into the commands suitable for control of IR, relay and serial. With the built in AP Module, the UI installed smart pad or smart phone is used to control devices via Wi-Fi without the need of additional network AP. For a number of devices to be controlled, a multi extender may be installed in addition, to enable the network connection between controllers via Wi-Fi or Ethernet.
Smart Pad/Phone
Multi Extender (Ethernet)
Multi Extender (Wi-Fi)PDU Screen
Air Con.
TV
AVR
Blu-ray
STB
TCP/IP
TCP/IP + PoE
RS485
RS232
Wi-FiWi-Fi
IR
PoE Switcher
Digital In USB Memory Lighting
Projector
Matrix Switcher
OS Program
Sensor 1
Sensor 2
DV12V/1.5APower
19
GWC2000 - Smart Network Controller
SpecificationsFeatures
Smart Network Controller
Enables TCP/IP network such as Wi-Fi, Ethernet (WAN, LAN)
and mode settings such as AP, Gateway, WDS etc
Enables extended control range by connecting a multi extender to the network
Supports RS232 control methods
Enables the OS program update through the USB Host and Device ports
Enables power supply (also works as a DC adapter) only through the UTP cable
with the PoE method
Enables to detect sensor signals lower than DC24V with the Digital In port
(this also enables the dry contact when additional switching work is carried out)
IR Learning function (by connecting to an exclusive edit program)
Enables the interwork with an RF Extender with 2.4GHz RF
1 RS232 port
1 USB Host port, 1 USB Device port
1 WAN port (PoE In), 1 LAN port
2 Digital In ports (terminal block 1, 2, G type)
1 Photo Diode for IR Learning
16 Ch and RF channels for 16 IDs (to be set from the exclusive edit program)
Using external RF antenna and Wi-Fi antenna
DC 12V/1.5A adapter / also works with PoE
20
GWC2000 - Smart Network Controller is a main controller used for forwarding the control commands sent by the exclusive UI program via TCP/IP network into the Multi Extender for control via Wi-Fi or Ethernet communications. With the built in AP Module, the UI installed smart pad or smart phone is able to connect directly via Wi-Fi without the need of additional network AP.
TCP/IP
DV12V/1.5APower
Smart Pad/Phone
PoE Switcher
TCP/IP + PoE Power
TCP/IP
Digital In
Sensor 1
Sensor 2
USB Memory
Multi Extender (Ethernet)
PDU
Screen
EthernetZone #1
EthernetZone #N
OS Program
RS232
OSUpdate
OSInstall
Matrix Switcher
Wi-FiWi-Fi
TV
Blu-ray Player
ProjectorRS232
Relay(Up)
Relay(Down)
Relay
Multi Extender (Wi-Fi)
PDU
Screen
Wi-FiZone 1
Wi-FiZone #N
TV
Blu-ray Player
ProjectorRS232
IR Cable
IR Cable
Relay(Up)
Relay(Down)
Relay
GWC2000 Smart Network Controller
21
Powerful IR Control
Smart Network Controller
All 360 emitting coverage of IR control signal with 8 IR LEDs
IR signal coverage: Typical 10m, Max 30m
IRED
Built-in AP Module
Extension by GWC Extender
When GWC1000 is connected to GWX Extender in the WDS mode, up to 4 units
(including 3 Extenders) can be connected.
When connected via TCT/IP network, it enables a number of connections up to the number
of available IPs in the corresponding network bandwidth (16 ea are recommended).
Also possible to work with GWC2000 and GWC3000.
Use of PoE Power
No AC power is needed but powered through UTP network cable with RJ45 jack
GWC1000 ( Ceiling Mount Type ) - Smart Network Controller & GWC Extender
22
GWC1000 – Gateway Controller is an IR exclusive controller used to control IR devices by transmitting omnidirectional IR control commands through IRED upon receipt of IR control commands via TCP/IP network from the exclusive UI program.GWC Extender is connected with GWC through network, performing the same functions as GWC. In places where control only by GWC is limited, GWC Extender can be installed in addition to extend the IR control range.
With the built-in AP module, direct Wi-Fi connection is enabled for UI
installed smart pad or smart phone, without the need of an additional
network AP
GWC1000Smart Network Controller & GWC Extender
GWC Extender 2GWC1000
Wi-Fi
Air-conditioner AV Receiver
Power
Blu-ray Player TV Smart Pad/Phone
STB
IR IR
GWC Extender 1
Power + Data
Power + DataPower + Data
PoE Switcher
23
Wi-Fi communication between smart pad/phone and GWC1000
Ethernet communication between GWC1000 and GWC Extender
Delivery of power and control data through PoE
A number of GWC Extenders can be used as many as the number
of usable IPs in the corresponding network bandwidth.
Extender
IRE200A
The RF signals received from the touch panel are converted as the IR, Relay, Serial control commands so as to control devices.
IRE200A is used to control TV, Blu-ray player, Set-top Box, Air-conditioner etc that can be controlled by IR.
RLE400A is used to control electric screen, projector elevation, sequence power supplier etc that can be controlled by Relay(Dry contact).
RSE500A is used to control projector, matrix switcher, light switch etc that can be controlled by RS232 or RS485 signals.
By selecting an appropriate individual controller, also you can use the customized integrated controller UXR1000 to various site conditions.
By combining up to 3 controllers, UXR1000 can be customized to your needs.
The 1U rack type UXR1000 is suitable for installation and use for sites where rack cabinet is available or electronic lecture desk is in use.
Comparisons of Specification as per model
- RF to IR, RS232 Extender
RLE400A
RSE500A
UXR1000
- RF to Relay, RS232 Extender
- RF to Serial Extender
- 1U Rack Type Integrated Controller
Model
IRE200A
RLE400A
RSE500A
153x94x28
153x94x28
153x94x28
435x150x46(1U Rack size)
IR IR IR LinkRS232 RS232RS485 RS485TCP/IP CVBS_D Relay Relay LANRF
Input signal Control port WxDxH(mm)
UXR1000(IRS type)
24
IP Settop Box
Air-conditioner
Light Switch
Light Switch
Motorized Screen
Motorized Control Receiver
Projector E/L
Digital AV Power Mixer
ProjectorProjector
RGB MatrixSwitcher
Video MatrixSwitcher
DVD Player
TV
RF to IR, RS232 Extender - IRE200A 1U Rack Type Controller - UXR1000
RF to Relay, RS232 Extender - RLE400A RF to Serial Extender - RSE500A
25
RF to Relay, RS232 Extender - R
LMC300 - LAN Multi Extender
Extender
Features
Specifications
ISupports the IR, Relay, RS232 control methods
Enables a number of connections up to the number of available IPs
in the corresponding network bandwidth(16ea are recommended)
Applies the RJ-45 LAN port
2 IR ports, 3 Relay ports, 1 RS232 port
IP Addressing
Power: 12V/1.5A SMPS DC adapter
TV
Blu-ray Player
Projector
LMC300(Ethernet)
GWC2000 or 3000
Screen
PDU
LAN
Relay (Up)
Relay RS232
IR Cable
IR Cable
Relay (Down)
DC In
RJ-45 LAN port RS-232 port
Relay port IR port
26
LMC300 – LAN Multi Extender, a multi controller, converts control commands received from GWC2000 (or GWC3000) via Ethernet into the IR, Relay, RS232 control signals to control devices.
WMC300 - Wi-Fi Multi Extender
Features
Specifications
Supports the IR, Relay, RS232 control methods
Enables a number of connections up to the number of available IPs
in the corresponding network bandwidth (16ea are recommended)
Applies Exterior Wi-Fi Antenna
2 IR ports, 3 Relay ports, 1 RS232 port
IP Addressing
Wi-Fi 802.11b (Max Power 17dBm)
Power: 12V/1.5A SMPS DC adapter
WMC300(Wi-Fi)
GWC2000 or 3000
Screen
TV
Blu-ray Player
ProjectorPDU
Relay (Up)
Relay RS232
IR Cable
IR Cable
Relay (Down)
Wi-Fi
DC In
Wi-Fi Antenna port RS-232 port
Relay port IR port
27
WMC300 – Wi-Fi Multi Extender, a multi controller, converts control commands received from GWC2000 (or GWC3000) via Wi-Fi into the IR, Relay, RS232 control signals to control devices.
RMC300 - RS485 Multi Extender
Extender
Features
Specifications
Supports the IR, Relay, RS232 control methods
Available up to 1024 usage at one location
(with the 10-pole dip switch)
Applies the RS485 port
2 IR ports, 3 Relay ports, 1 RS232 port
ID allocation with Dip switch
Power: 12V/1.5A SMPS DC adapter
RMC300(RS485)
GWC3000
Screen
TV
Blu-ray Player
ProjectorPDU
Relay (Up)
Relay RS232
IR Cable
IR Cable
Relay (Down)
RS485
GWC3000GG
RS
DC In
RS485 Port RS-232 Port
Relay Port IR Port
28
RMC300 – RS485 Multi Extender, a multi controller, converts control commands received via RS485 into the IR, Relay, RS232 control signals to
control devices.
UDIO16 - Flex DIO Extender
Features
Specifications
Digital input signal detection (standard 7V ~ 30V, additional 5V or Dry Contact available)
Relay 16 point control
RS485(Modbus) communication
Wide range of applications by the control program
Up to 64 connections by ID distinction
Input port: 16 Digital In ports
Output port: 16 Relay Out ports (8 each on the left and right sides)
2 RS485 communication ports
Power: 12V/1.5A SMPS DC adapter
(10V ~ 30V adapter available)
Relay OutPort 8ea
Relay OutPort 8ea
Digital InPort 16ea
RS-485 Port
DC In
Control commands according to the digital input signals
Relay control commands
Digital SignalDigital Signal
RS485
UDIO 16 Tracking Camera
Control Program
Mic.
Mat Sensor
Motion Sensor
Motion Detecting
Motorized Device
29
UDIO16 - Digital In/Out Controller, a digital controller, is used to save informa-tion upon receipt of digital signals, and perform the Relay control according to such information. The digital input information saved in UDIO16 is forwarded to a separate control program via RS 485 communication, and the control program gives the Relay control commands according to the digital input signals.
LMC100A - LAN to Multi Extender
Extender
Features
Specifications
RF to LAN / LAN to RF Converter
IP addressing for LMC100A using the setup program
Up to 200 addressing depending on the IP address of the router
Exterior antenna (2dB)
Using RF 2.4GHz Zigbee
4 IR ports, 1 RS232 port
IP Addressing
Power: 12V/1.5A SMPS DC adapter
Air-conditioner
AVR
Blu-ray Player
TV
LMC100A
Projector
IR CableRS232
LAN
BX7000LAN
RJ-45 LAN port
RS-232 port IR port DC In
30
LMC100A, a multi converter, converts control commands received from BX7000LAN via TCT/IP network into the IR, RS232 control signals to control devices.It can also receive RF signals from UX3500 or BX7000LAN, and then converts them via ‘RF to LAN’, ‘LAN to RF’ to control IR, RS232 devices.
LMC150 - LAN to Multi Extender LMC200 - LAN to Multi Extender
LMC150 Features
LMC150 Specifications
Supports the IR, RS232 control methods
Power On/Off status check using the RS232, USB, CVBS ports
Connecting to GBS program using a private network
Unlimited number of connections
Control Port: 2 IR ports, 1 RS232 port
Signal Detection Port: 1 USB port, 1 CVBS port
1 RJ45 LAN port for network
Power: 12V/1.5A SMPS DC adapter
The AC Power Monitoring Function of LMC200
Integrated Operation PC(GBS Manager)
TV (RS232 supported) IR Cable
IR Cable
USB
Component,Composite,S-Video
RS232
TV (USB supported)
Settop Box
LMC150Network
DC In
USB portLAN port
RS-232 port IR port CVBS port
31
LMC200
LMC200 is an advanced version of LMC150, with an added AC power monitoring function. The wattage of the device connected to the AC detection port of LMC200 is detected to determine the power status of that device. (Detectable up to 2A)
LMC150 & LMC200, a multi converter connected to an integrated operation program (CMS) via network, is used to control IR, RS232 devices remotely, and check & display the power status of the corresponding device on the integrated operation program.Since the administrator is enabled to monitor and control target devices remotely, the system can be managed and operated in an efficient manner. If the network already exists, no other wiring works are required, the system implementation cost can be saved. This is suitable for a wide range of applications where remote control is required, in particular for insurance or communication companies operating a nationwide enterprise broadcasting system.
AVP Series - AV Processor
AV Processing & Transceiver
AVP710 Specifications
Audio USB VGA Control
Nominal power : 70W(4ohm/2CH)
Audio In : 3 (3.5 pi, Stereo)
Audio Out : 1 (3.5 pi, Stereo)
MIC In: 2 (5.5 pi, Mono)
Individual Volume Control : 3 (Device, MIC, Master Volume)
Speaker terminal : 4 old terminal (Spring type)
In : 2(Mini B) / Hub : 4
USB Interface : Ver 2.0
RGB In : 2 (DSUB-15, Female)
RGB Out : 2/simultaneous output
(DSUB-15, Female)
Resolution: 1600 x 1200
IR Control port : 2
IR Receiver Port : 1
Relay Port : 5 (Screen Up, Stop, Down /
Elevation Up, Down)
RS232 Port : 1 (3.5pi, Stereo)
Comparisons of Specification as per AVP Series model
* : Direct Motor control support
Model
AVP700
AVP700DM
AVP710
AVP710DM
IR IR Relay RS232RF RS232/485
70WAMP
VGAIn/Out
AudioIn/Out
MICInput
VolumeControl
VideoIn/Out
TVTuner
USBIn
USBHub
Hard button
12VDC Out
422.6x160x48.5
Input signal Control port Function WxDxH(mm)
32
Network based integrated monitoring and control functionThe function of amplifier has been applied so that microphone, PC, Aux, Volume etc can be controlled.PC selection function enables you to select between two PCs. The PC selected works with keyboard and mouse connected through USB.The screen output through 2 RGB ports is displayed on PC monitor and projector.External hard buttons enables you to select device and control motorized device and volume control.Integrated control available using IR, Relay, Serial control ports. Wireless RF touch panel(UX3500) can communicates with AVP series by 2.4GHz RF, and IR touch panels(UX3000 or ITRC7700DX) are also possible using IR input port.
Up/Down of projector screen/ projector elevation
Volume control of selected device, Microphone volume control, master volume control
Select the PC for audio, RGB signal output, USB matching
9
MicrophoneKeyboard Mouse
USBMemory Camera
Motorized screen
Projector E/L
TV
Projector
Power switch
Notebook
Audio AMPSpeaker
UX3500 2.4GHzRF Signal
BX7000
RGB signal input/output Audio signal input/outputUSB input/outputIR ControlRS232 ControlRelay Control
External equipment(CDP, MP3 etc)
External hard button control
UX3500
AVP Series AV Processor
33
4x3 HDMI Matrix Switcher
Features
Specifications
AV Processing & Transceiver
4x3 HDMI Matrix Switcher
HDMI, USB, Ethernet, IR data transmission with DiiVa Protocol
Configuring 3 Output Zones using the exclusive Wallplate and Receiver
Supporting 1080p high resolution video and Dolby/DTS audio
IR Pass-Through
Controls by IR and RS232
Device Input : 4 x HDMI, 4 x USB, 4 x IR(Control Out)
Zone Output : 3 x DiiVa, 3 x Optical Audio, 3 x IR(Control In)
System : 2 x Ethernet, 1 x IR output, 1 x USB, 1 x RS232
HDMI 1.4 1080p @60Hz / 3D & 4K support
Size/Weight: 44.5 x 438 x 254mm(HxWxD) / 2.8Kg
Workable Temperature: -20 ~ 70
Power consumption: Max 72W
1. IR Receiver Sensor Windows
2. Power Switch
3. Output Select Switch
4. Light Indicators for Input
1. Input port for 4 Video Source Devices
- USB(type B) / HDMI Rx / IR Output
2. Output ports for 3 Zones
- DiiVA output / IR Input / SPDIF output
3. Dual Ethernet Ports
4. IR output to control the AV receiver
5. RS232 to Connect 3rd party controllers
6. USB(Type A) for System Firmware Upgrade
7. System Power Plug(24V @ 3A)
- DiiVa In
- IR In/Out
- Ethernet
- HDMI out
- USB
Receiver- DiiVa In
- IR In/Out
- Ethernet
- HDMI out
Wallplate
1 2 3 4 5 6 7
Receiver
3 421
34
This matrix switcher is used to receive (input) 4 different HDMI sources and then send them out (output) to 3 zones.It also can switch USB input/output together with the HDMI sources, and supports the 1080p high resolution video and Dolby/DTS audio system.Through DiiVa Protocol, it can transmit all data including HDMI, USB, Ethernet, IR and etc. Since all communications are enabled just with a single UTP cable, wiring works are simply done.
4x3 HDMI Matrix Switcher
Smart Pad/Phone Receiver
Zone 1
Zone 2
Zone 3
Wallplate
Receiver
GWC2000 or 3000
4x3 HDMI Matrix Switcher
IR Remote Controller UX3500
IR Signal
IR Receiver Cable(IR Pass - Through)
Wi-Fi
DiiVa
PC
PS3
STB
Blu-ray
TV
RemoteController
USB Device
TV
RemoteController
USB Device
TV
RemoteController
USB Device
HDMI
USB
USB
IR
IR
RS232Control
HDMI+USB+IR
HDMI
IR
USB
HDMI
IR
USB
HDMI
IR
USB
LAN toHDMI
30mover
HDMI to LAN
35
HDMI to RJ45 Extender RJ45 to HDMI Extender LAN Repeater
Features
Specifications
AV Processing & Transceiver
HDMI, USB data transmission with DiiVa Protocol
Supporting 1080p high resolution video and Dolby/DTS audio
Using PoE Power (Rx, Repeater)
HDMI to RJ45 Extender LAN Repeater RJ45 to HDMI Extender
HDMI to RJ45 Extender
Input : HDMI, USB Type B / Output : RJ45 / 12V 2A
RJ45 to HDMI Extender
Input : RJ45 / Output : HDMI, 2 USB Type A
LAN Repeater
Input : RJ45 / Output : RJ45
HDMI HDMI
UTP 30MCat 6
UTP 30MCat 6
HDMI to RJ45 Extender
RJ45 to HDMI Extender
LAN Repeater
36
The HDMI signals can be amplified up to 30 meters using ‘HDMI to RJ45 Extender’ and ‘RJ45 to HDMI Extender’.For a long distance transmission over 30 meters, a LAN Repeater can be used to extend the distance.
Expands the operational distances of the Touch Panel with RF controller
Improves the shadow region of RF signals
Radio Frequency : 2.4GHz
RF signal coverage : Max 100meter
Channel Address : 16
DC 12V/1.5A SMPS DC Adapter
WxDxH(mm) : 85 X 90 X 28
Accessory : 2.4GHz Exterior Antenna(2dB), DC Adapter
Converting RS232 to RS485, RS485 to RS232
Possible to signal transmission up to 1km when converting to RS485 signals
Supports the parallel connection of RS485 devices
(10 units as standard, max 30 units)
Baud Rate : MAX 115,200
LED : PWR, TXD, RXD
RS232: terminal block 3Pin (socket type), Tx/Rx supported only
RS485: terminal block 2Pin (socket type), A(+), B(-)
DC 12V/ 1.5A(DC Adapter AC IN 100 240V)
WxHxD(mm) : 50 x 20 x 63.5
IR Emitter Cable is fitted to the IR receiver unit of the IR control device
to emit IR control signals.
Shield Cover is used to ensure adhesiveness of the IR Emitter Cable
fitted to a control device.
It is made of silicon, and can be cut to a desired size.
Accessory
RPT100A - RF Repeater RSC100 - Serial Converter IR Emitter Cable & Shield Cover
37
INTEGRATION SOFTWARE UIPC Editor – Touch Panel Program
Integration Software
UIPC Editor - Touch Panel Program
You can edit and set the UI screen and button functions of
the UTAS touch panel as you want for easy and convenient configuration.
You can use database to save and back up device information.
You can also use Project files to manage files systematically.
You can check the screen configuration (such as pages and buttons) using Emulator,
without sending data to the touch panel. By connecting an USB to the touch panel,
you can test and check the status of the devices.
By the USB connection, you can transmit the setup files from the touch panel.
[USB connection]Touch Panel
39
UIPC Editor is an user-friendly editing program exclusive for UTAS touch panel, used to set and edit the user UI screen and control data.This authoring tool enables the user/operator/administrator to have the optimized graphic screen and control properties to his own requirements in various and complicated environments, such as meeting room, situation room, control room, lecture room, exhibition room, home theater room etc equipped with video, audio, light or curtain system, air conditioning and HVAC.
You can edit and set the screen and button functions of Smart Phone/Pad to
your own requirements by PC, for easy and convenient screen configuration.
You can use Project files to manage files systematically.
You can check the screen configuration (such as pages and buttons) using Emulator, without sending data
to the smart phone and pad. With the PC program automatically created, direct control on the PC is enabled.
Applicable to all smart pads and phones (including Android based, iPad, iPhone etc)
INTEGRATION SOFTWARE UX Loader - Android/iOS App Program
Integration Software
UX Loader - Android/iOS App Program
Smart Pad Control – TaeguTec Conference Room Smart Pad Control – BEXCO Auditorium
40
UX Loader is an application used to receive UI and control property files written on UX Editor, so as to control the UTAS controller with Android/iOS Phone & Pad. UX Editor is an authoring tool, used to create graphic screen and control properties of UTAS controller (supporting TCT/IP) to your own requirements in various environments, in the optimized way. Using the files created, you can also have the PC program created automatically.
INTEGRATION SOFTWARE Command Center - GWC Data Editing Program
Command Center - GWC Data Editing Program
It is used to edit and set the control functions of GWC1000/2000/3000
to the user’s own requirements for easy and convenient configuration.
You can use database to save and back up device information.
You can also use Project files to manage files systematically.
You can easily transmit the setup files to controller via Ethernet or WiFi connection.
41
Command Center is an exclusive program, used to edit data of UTAS Network Controller. The program created on PC by Command Center is transmitted to Network Controller via TCP/IP or WiFi connection, and Network Controller converts it to the IR, Relay, Serial control commands to control devices.This editing program enables the user/operator/administrator to set the optimal control properties to their own requirements in various and complex environments.
CMS - Central Management Software
Integration Software
CMS is connected to UTAS LAN Multi Converter and Network to control remote IR, RS232 devices.
Since the administrator is enabled to monitor and control remote devices, efficiency in system operation and management can be realized.
With the scheduling function, the system can be operated to the set times.
If the network already exists, no other wiring works are required, and the system implementation costs and the network maintenance costs can be saved.
This is suitable for a wide range of applications where remote control is required, in particular for insurance or communication companies
operating a nationwide enterprise broadcasting system.
INTEGRATION SOFTWARE CMS – Central Management Software
42
In applications where integrated operation and management is required (such as companies, corporate training center with nationwide network or universities with multiple lecture rooms), a PC for integrated operation in the central control room can be used to control devices globally, by group, individually or by schedule using CMS, the software for integrated operation.
CMS Application Example – Software for Enterprise broadcasting integrated operation system
From the integrated operation PC in the central control room, TVs and STBs of each and every branch throughout
the nation can be controlled globally, by group and individually.
Network configured with the fixed IP for the integrated operation PC only, but with automatically allocated private IP
for Network Multi Converter (LMC150 or 200) of branches.
Monitoring the power status of each device with the integrated operation program, as well as controlling TVs and STBs.
Start and end of broadcasting times can be set with the scheduling function (single execution for a specific date,
or repeated execution for designated days is possible).
If the enterprise network already exists, no other wiring works are required, and no need to have branch administrators,
thereby making a significant savings on the system implementation costs and the network maintenance costs.
[UI Example - Enterprise broadcasting integrated operation system]
Private Network(Ex:192.168.x.1)
LMC150#1
STB#1
TV#1
RS232IR
LMC150#2
STB#2
LMC150#3
STB#3
TV#3
Branch #1
Control Room
Integrated Operation PC
Private Network(Ex:192.168.x.1)
LMC150#4
STB#4
TV#4
RS232IR
LMC150#5
STB#5
TV#5
LMC150#6
STB#6
TV#6
LMC150#N
STB#N
TV#N
Branch #2
Branch #N
NetworkTCP/IP
43
CMS Application Example – Software for PC based AV facilities integrated operation system
By connecting the integrated operation PC to GWC3000 of each group via a network,
the AV facilities of the entire branches (groups) can be controlled from the central PC.
The broadcasting signals of a single STB of each branch (group) are transmitted to a number of TVs. Since it only requires one single
STB per branch, a significant amount of savings can be made on the STB purchase and maintenance costs.
Power of each TV, Volume, Input Selection, Channel Selection for STB, Select and Replay of PC Contents etc are programmable.
Using the AV Processor, you can select and transmit the RGB+Audio signals either from STB or PC.
[UI Example - PC based AV facilities integrated operation system]
Control Room
Integrated Operation PC
Group #1
Network
TCP/IP
RF
Wired IRIR Control
IR Control RGB+Audio
GWC3000
IRE200A
TV #1
TV #2
TV #3
TV #4
RGB+Audio1:N Distributor
AV Processor
PC STB
RGB Convertor
44
CMS Application Example – Software for Web based lecture rooms integrated operation system
The integrated operation PC is connected to BX7000LAN of each group via a network, so as to
control video, audio devices of each lecture room from the PC.
With the web based CMS programming, systems can be operated anywhere as long as the Internet
connection is available
Individual control of each lecture room by installing a fixed type 7” touch panel (BX7000LAN)
on the electronic lecture desk in lecture rooms.
Using the AV Processor, you can control volume and select video sources.
With the two way communication, monitoring of projector lamp usage, for example, is
enabled –improving control efficiency and saving maintenance costs.
With the scenario setup function, lecturers are supported with the optimum programs
(such as ‘start of lecture’, ‘end of lecture’ etc).
With the scheduling function, the lecture room environment can be preset for the desired times.
[UI Example - Web based lecture rooms integrated operation system]
Lecture Room B
AV Device
AV Processor
BX7000LAN
Lecture Room C
AV Device
AV Processor
BX7000LAN
Lecture Room A
AV Device
AV Processor
BX7000LAN
Studio
Integrated Operation PC
Network
2.4GhzRF Signal
45
AV Processor AV Processor AV Processor
Introduction to Building Automation Solution
With the global standardization in the completion phase, interest is being heightened in the development of technology/product based on such global standard.
ITU-T SG13. Q12 Y.WOT: The WOT service model and development of its structure has already been completed. (2012.7)
IEFT Core WG: The 6LoWPAN based CoAP standard has been established
The system reflecting the international standardization and the future market trends
The web based integrated management system implemented with the next generation Internet, IPv6 - based 6LoWPAN and CoAP technologies
The system implemented with the latest WoT(Web of Things) technology that enables the monitoring and control of objects via web.
The system that realized the M2M (machine-to-machine) communication paradigm.
Necessity of a System that can meet the increasing requirements of the integrated interwork/control
Existing devices use different protocols and communication methods (such as RS232/485, Bluetooth, IR, RFID, Zigbee usually determined by device
manufacturers), lacking in inter-workability and making it difficult to implement an optimized and integrated auto control.
Up until now, there has been a limited degree of integrated auto control, but in practice it is manually controlled by operators, with the poor efficiency
issue coming to the fore.
The necessity of a solution is rising, which can enable the integrated interwork and control of legacy devices of varying methods.
The necessity of a device (an agent adapter for instance) is rising, which can enable the conversion to the web based services.
46
Expected Effects of the System
Savings on System Implementation Cost
Convenience in Building Management (monitoring and control)
Savings on Operation Cost
Scalability
With the wireless building automatic control system, it can save 30% of the wiring cost compared to the wire system.
Time required for system implementation can also be saved by 60%.
With the integrated operation solution customized and optimized to the individual requirements, the building operation costs can be
reduced at least by 30%.
Achieving the manpower integration and downsizing when contrasted with the conventional system where air conditioning,
lighting and other devices are independently controlled.
The IP-USN based system utilizing IPv6 being determined for worldwide application in the future,
Offers readily available scalability with systems and devices to be added after the initial installation.
Block diagram of IP based Building Automation Solution
Environment Sensor(Temperature, Gas, shake)
Broadcasting AV Device of building
SmokeSensor
WindSensor
Generator MessageI/P
Ventilation
Heating & Air-conditioning
Electrical installation
Parking control
Video Sensor
Gateway(+ wireless AP)
Residential Service
Conversion adapter B
Non-web supported legacy devices
protocol conversion S/W (Agent)
CoAP based light weight embedded
web server platform
CoAP / HTTP
IPv6
802.15.4 MAC/PHY
Adaptation LayerSensor dataControl data
WiFi6LoWPAN
(IPv6)Ethernet
(IPv4 or v6)
Touch Panel UI
Smart Phone Access
Web browser
Central Control Center
Ethernet(IPv4 or v6)
UDP TCP
HW
Device built-in interface
CoAP based light weight embedded
web server platform
OS Service
CoAP / HTTP
IPv6
802.15.4 MAC/PHY WiFi
Adaptation LayerSensor dataControl data
WiFi6LoWPAN
(IPv6)
OS
UDP TCP
HAL
HW
Gateway(+ wireless AP)
Main Server / DB
Ethernet
Micromini wireless communication module for WoT and AdapterWeb based customized
integrated opertion system for user and administrator of building
48
Introduction to IP based Building Automation Solution Products
Software
The wireless communication embedded module consisting of 6LoWPAN (this has the built-in CoAP based light weight
embedded web server suitable for light, HVAC, electric devices etc) and the WiFi function
Wireless Communication Module
The single and multi port agent adapter enabling to interwork with non-web supported legacy devices and facilities
Single and Multi Port Adapter (agent)
The gateway integrating the gateway function (connecting the IPv6 based 6LoWPAN and general Ethernet network)
and the wireless AP function
Integrated Gateway
Devices fitted with the above system within a building can be well monitored and controlled through the interworking via web,
to the changing environments and user requirements.
Web Integrated Operation System
Customized smart touch panel APP and smart terminal UI operation software with the remote control/monitoring functions
Smart terminal APP and UI Operation Software
49
Introduction to Smart Home Solution
[Example - Smart Pad UI Program]
50
Smart and convenient living environment can be realized for apartments and individual houses by the integrated control system customized to each user to control TV, audio, air conditioner, heater, curtain and light. Convenient and pleasant home entertainment environment can be realized by the integrated home AV automation system that interworks with all AV equipment, light and curtain.With the setting function to various scenarios such as ‘Wake up’, ‘Sleep’, ‘Go out’, ‘Watch film’, ‘Dinner’ etc you can create the mode of your choice at a single touch. Monitoring and control of your home is also enabled remotely using smart pad or smart phone.
The system is largely configured with the User Interface and Controller parts. User Interface can be configured with a 3.5” touch panel (UX3500) that controls individual rooms, and a smart pad that is used for the integration control of the entire household. 7 inch fixed type touch panel (BX700LAN) may also be mounted on the wall like a wall pad.Controller consists of the Smart Network Controller that works as the master controller to control devices within the household in IR, Serial methods through communication with User Interface via Ethernet, Wi-Fi and RF; and Extender or Converter depending on the site conditions. The smart pad can control devices anywhere as long as wireless AP connection is available in the household.PoE can be applied as the power supply to make the wiring work simple and efficient.The UI program for touch panel and smart pad can be customized to the user’s requirements using the exclusive UI software program.
Block diagram of Smart Home Solution
IR
Relay
SERIAL
TCP/IP
GWC3000Smart Network controller
RSC100
Room #1
Master Room
Living RoomRoom #2
TV
STB
LMC100A
GWC Extender
Air-con
HomeTheater
TV
STB
Air-con
HomeTheater2.4Ghz
RF Signal
IR
3.5”Touch Panel Smart Pad / Phone
GWC Extender
Wi-Fi
2.4GHzRF Signal
TCP/IP
RS485 to Transmitter(Motor Controller )
Light Switch
GWC3000Smart Network controller
PoE Switcher Hub
51
Motorized Curtain
UTAS Inc.
Foundation Day
Location
Homepage
Tel
Fax
Feb 28, 2004
#904, 905 25 Simin-Daero 248(st), Gwanyang-Dong, Dongan-Gu, Anyang-Si, Gyeonggi-Do, 431-815, Korea
www.utas.co.kr
+82-31-422-8818
+82-31-422-8817
Selection & Registration
Selected as venture company (Korea Technology Finance Corporation / Nov. 6, 2009)
Accredited as Company Affiliated R&D Institutes (Korea Industrial Technology Association / Mar. 27, 2006)
Patent Registration 3 case / Patent Application 3 case
Design Registration 2 case
Selected as Good Design [GD] product (Public Procurement Service / Dec. 20, 2006)
Selected as Venture Design Product (Korea Institute of Design Promotion / Dec. 7, 2006)
Accredited as global strategy product manufacturer (Korea Information Technology Research Institute/ June 7, 2010)
Product Certification 7 case
52
Company History
2004 Founded UTAS Inc.
2005 Joined in IFSEC 2005 (Birmingham, UK)
2006 Released mobile 3.5” touch panel controller
Awarded the Venture Design Prize
Awarded the 2006 Good Design Prize
2007 Patent registration [Patent#: 10-773084]
Released RF based integrated control solution
Patent registration [Patent #: 10-0679184]
2008 Patent registration [Patent#: 10-0797030]
Started providing products to V-Technology [France]
Released scenario control system
2009 Released PC based integrated operation program [UIPC]
Released Wi-Fi based integrated control solution
2010 Released LAN based integrated operation solution
Released the integrated operation system for lecture rooms
Accredited as global strategy product manufacturer from Korea Information Technology Research Institute
Released iPad / iPhone based integrated automation solution
Contributed to IEEE Journal, “Advanced Universal Remote Controller for
Home Automatoin and Security”
2011 Released two-way automation solution for heating & air conditioning and HVAC facilities
Released AVP Series, Integrated AV processor
Released Network based monitoring and control solution
2012 Released the integrated operation solution for multi IP STB based
broadcasting system
Released Wi-Fi, 3G Android smart device based smart control solution
Released UX-Editor and UX-Loader
2013 Provided Integrated Remote Controller for 1,200 household of Gwanggyo APT
Obtained governmental R&D project ; ”Development of WoT device for
building and integrated operation system for saving energy cost”
Partners & Customers
53
UTAS Inc.
#904, 905 25 Simin-Daero 248(st), Gwanyang-Dong, Dongan-Gu,
Anyang-Si, Gyeonggi-Do, 431-815, Korea
TEL : +82-31-422-8818 E-mail : [email protected]
Homepage : www.utas.co.kr
2013 UTAS Inc. Products and specifications subject to change without notice.