cost-efficient manufacturing solutions
TRANSCRIPT
Cost -Eff ic ient Manufactur ing Solut ions
Certificates Executive SummaryCapabilities Contact Us
The Team PartnersAbout Us Workflows
Content Overview
Precision Machining Consultancy (PMC) has been founded by two partners in 2020,
Ankara, Turkey. They have graduated from Middle East Technical University, one of the
most valuable universities of Turkey and their professions are mechanical engineering
and aerospace engineering. They have more than 5 years’ experience in both qualified
industrial zones and defense industries. Market needs and their knowledge encouraged
them to establish PMC.
PMC is not manufacturing company and owns no production factory. Rather, It allows
overseas companies to access to huge production facilities in Turkey by ensuring high
quality production standards. PMC works as an independent supervisory company.
Throughout the production line It inspects manufacturers step by step and reports
regularly to clients.
About Us
Mission Vision
To be best in the class, offering best
service to customers beyond their
expectations.
To become a world brand with the
precise solutions and highest quality
based on honesty and trust beyond
our customer’s expectations.
Using all the benefits of our highest
quality and cost-smart solutions,
make difference and give the best
service to the customers in order to
exceed their expectations.
Responsibilities
Customer Contact
Financial Organization
Shipment Organization
Marketing
Feasibility Study
Co-Founder
Kürşat Çalık
Co-Founder
Mustafa Boybey
The Team
Responsibilities
Project Management
Submissions of Quotes
Outsourcing Organization
Quality Control
Manufacturing Management
Background
Mechanical Engineer
Graduated from Middle East Technical
University
3 years work experience on machining and
project management to Turkish Defense
Industry & US Defense Logistic Agency
2+ years experience on Key Characteristics
and Tolerancing in Turkish Aerospace
Background
Aerospace Engineer
Graduated from Middle East Technical
University
5+ years work experience on R&D in Turkish
Defense Industry
Partners
PMC established partnerships with the most experienced companies in
their field like machining, coating, painting, heat treatment, packing, NDT,
marking and so on in Turkey. Most of the partners has more than 30 years
of experience and they are mostly small companies with 10 - 30
employees. PMC aims to connects these companies and make them work
like subsidiaries of a large company.
PMC contracts with the partners to ensure strong quality and protect
customers' rights. Throughout the production line It inspects partners step by step and reports to the customer.
Expert on high precision manufacturing
Experienced in Defense, Aviation and Automotive industries
Manufactures according to International Standards
Has diversity in machine pool (5, 4 & 3 axes CNC machines, Wire EDM etc.)
Our Partners;
Workflow
• Make an application related
bidding by providing RFI
1
2
3 5
4• A non-disclosure agreement
(NDA), also known as
a confidential disclosure
agreement (CDA) are signed
mutually
• Evaluating the work
package
• Preparing and submitting
RFQ/RFP form to the client
• Assign the work package
to suitable partners
Bidding Phase
After the first meeting, RFI form is submitted to
the client. If we are qualified for the work
package, NDA is signed mutually.
When the work package is shared with us, we
begin to evaluate the requirements. Then
we analyze the work package in detailed and
perform cost analysis.
RFQ form will be submitted the customer
subsequently. After we are awarded with the
contract we distribute the work package with our
partners.
Workflow
• Heat Treatment, Coating,
painting, NDT, Marking,
Sanding, etc.
10
11
8 6
7• Machining & Measurements
• Premeasurements and
FAI if desired
• Sample manufacturing
• Raw material supply
and inspection (Origin,
allowables, L-Lt-St
directions etc.)
Production Phase
9• Quality Control (Dimensions,
coating thickness, color,
hardness, sharp edge,
roughness and so on)
Firstly, raw material is procured from the supplier predefined on the bidding phase and it is inspected regarding its origin, allowables, directions(L,
Lt, St), visual. Next CAM operation is performed and a sample is produced by using CNC machine. Then all GD&T requirements is validated with CMM.
If FAI is requested from the client, other requirements such as painting, coating marking, etc. are fulfilled and the sample is shipped to the client.
After that serial production takes place. All the parts are machined and semi finished products are inspected with CMM, gauges, templates and so
on. Such operations like heat treatment, annealing, stress relief is applied during the machining phase according the part requirement. Later on NDT,
sanding, painting, coating, marking, etc. operations are performed. Quality requirements are inspected and reported after each operation.
Workflow
• Shipment of the work
package
12
13
• Packaging
Delivery Phase
• Compiling reports and
submitting the final report
14Machined products are packaged according to client requirements or
international packaging standards(i.e. MIL-STD-2073). And the package is
tagged as how the client desires. RFID tagging may be also applied if it is
requested by the client.
All inspection reports, raw material certificates and measurements throughout
the production line are complied and turned into a final report. Then it is
submitted to the client as a hard copy and a soft copy.
After all, products are shipped to the client according to one of the
incoterms(FOB, DDP, DAP, etc.) which is determined at the bidding phase.
Machining Capability
Ability to Machine Wide Range of Materials
Experienced in machining wide range of materials such as
stainless steel, corrosion resistant steels, aluminum alloys,
titanium alloys, nickel alloys, bronze, copper, peek,
polioksimetilen, kestamid, polyamide and so on.
02Capability of Machines
Ability to 5 axis vertical milling simultaneously
Ability to 4 axis turning simultaneously
Ability to 4 axis machining with Wire EDM
Machine pool is in the next page
03Assembly Applications
Insert & helicoil installation
Fastener & bearing placement
Lubrication application
04
High Precision Manufacturing
Familiar to manufacture within narrow tolerance ranges.
Locally this ranges might be several microns.01
Ø300 x 570 mm max part dim.
+/- 51 mm Y- axis travel
4 axis CNC turning machine
(X/Y/Z): 1530/530/465 mm
Ø650 mm
5 axis CNC milling machine
Ø350 x 650 mm max part dim.
+/- 50 mm Y- axis travel
4 axis CNC turning machine
Ø500x500 mm max part dim.
5 axis CNC milling machine
Ø500x300 mm max part dim.
5 axis CNC milling machine
(X/Y/Z): 600/400/350 mm
(U/V): ± 50 mm
4 axis Wire EDM
(X/Y/Z): 1050/560/460 mm
Ø650 mm -50°/+110°
4 axis CNC milling machine
Ø650x500 mm max part dim.
5 axis CNC milling machine
Machine Pool
**You can find full list of machine pool at the end of presentation
Laser Cutting and Sanding
24/7 Fiber and CO2 Laser Cutting.
Wide range of applications. In addition to steel, stainless steel, and aluminum, non-
ferrous metals can also be processed in excellent quality
Ability to cut; carbon steel up to 25mm, stainless steel up to 25 mm and aluminum
up to 15 mm
Outstanding cutting performance for high parts output and excellent cutting quality
with thin to medium sheet metal
Ability to uniformly deburrs and finishes the edges of metal parts in a single pass
thanks to multi-directional brush machine
01
CNC Bending Press and Punch
The thickness of the materials to be twisted varies between 0.5 – 15 mm and the
thickness of the sheet depends on the properties of the molds; We can bend DKP,
Galvanized, Stainless, Aluminum, HRP, sheet metal, checkered plate and so on.
Angle adjustment ensures highly accurate bending even when material thickness
and properties vary from part to part.
Ability to punch up to 6.35 mm for steel
02
Welding
With experience in Gas Metal Arc Welding (GMAW), Flux Core Arc Welding (FCAW),
Gas Tungsten Arc Welding (GTAW), and Shielded Metal Arc Welding (SMAW), our
certified welders take pride in their work for consistent, high-quality and
dimensionally accurate fabrications, day after day.
03
Sheet Metal Capability
Bending Length - 1250 mm
Bending Capacity - 30 ton
CNC 2 - Axis Control (Y-X)
Uses: Metal Finishing and
Deburring
11” Diameter Adjustable Contact
Drum & Brush
Press Capacity (kN) 800
Automatic angle adjustment
5 axis back gauges with tool
navigation system
125 Hydraulic Press
No Of Axis 8
Bending Length 3100mm
Laser Power 4.4 kW
Maximum cutting sheet thickness
Stainless Steel: 25mm ; Aluminium: 15mm
Fiber 4000 19kW Laser Power
Stainless Steel: 15mm ; Aluminium: 20mm
Brass: 8mm ; Copper: 8mm
33 Ton CNC Punch With 1.5 KW Laser &
machine tools & fabricating equipment.
Machine Pool
Wide Range of Surface Treatment Operations
The goal is to further improve the surface of parts after machining to ensure that
they provide optimal protection against corrosion and wear and tear throughout their
life cycle. The treatments undergo stringent quality control after process.01
Coating in Accordance with Military & Commercial Standards
Surface treatment operations are applied to parts with respect to both commercial
and military norms like MIL, AMS, ASTM, Fed and so on.02Quality Control
Quality always comes first with us. We have very sophisticated equipment and an in-
house laboratory. Quality control is more than just part of the process; it guides
everything we do. Quality Management System EN 9100:2018 is the system we
follows during our work.
03
Surface Treatment Capability
Surface Treatment Capabilities
Dry / solid film lubricant coating
provides long-term protection,
prevent damaging base metal by
lubrication and sliding surfaces
continuously and also protects from
corrosion at the same time.
Electroless Nickel Plating is based
on coating the metal and composite
surfaces by Nickel-Phosphorus
alloy.
Electrolytic Gold plating; steel,
aluminum and alloys, zinc and
alloys with nickel and alloys can be
made on the hard, wear-resistant
and bright yellow appearance is an
acid-type electroplating
Purpose of this type of coating is
cleaning the surfaces of corrosion
resistant steels, removing the oxide
layer from surface and creating a
film layer which passives the
surface.
Insulating and protective layer
created by phosphate crystals over
the steel surfaces is done via
Phosphate Coating.
Magnesium Chromate Coating
treatment is increasing corrosion
resistance by creating a film layer
over alloy surfaces and increasing
the adhesion ability on the surfaces
to be painted.
Aluminum Chromate Coating
process is creating a thin surface
over aluminum and aluminum alloys
to increase corrosion resistance,
keep electrical conductivity,
increase adhesion over surfaces to
be painted and to add a decorative
look.
Meaning of anodized coating in
word sense is oxidation of
aluminum by using and electrolytic
method. This process is also called
as Anodic Oxidation or Anodization
as well.
**You can find full list of surface treatment operations at the end of presentation
Heat Treatment
Heat treatment is the process of heating and cooling metals, using specific
predetermined methods to obtain desired properties. Both ferrous as well as non-
ferrous metals undergo heat treatment before putting them to use.01
Wide Range of Heat Treatment Operations
Quenching and Tempering, Annealing, Case Hardening, Aging, Vacuum Heat
Treating, LPC, Austempering, Induction surface hardening, Stress Relieving,
Normalising, Gas Nitriding, Plasma Nitrding, Oxidation, Carbonitriding, Carbon
Restoration, Alum-Oxide Blasting are some of our services.
02Quality Control
Operations are performed according to both international and military standards or
customer own standards.
NDT operations and quality checks are performed by skillful employees in our quality
control room
Quality control is more than just part of the process; it guides everything we do.
Quality Management System EN 9100:2018 is the system we follows during our
work.
03
Heat Treatment Capability
Heat Treatment Capabilities
Our oil quench limitations are 1000
wide x 750 high x 1300 mm long
and a 1,000 kg load limit. Our water
quench limitations are 1300 high x
1500 wide x 2500 long and a 3500
kg load limit per quench.
We can anneal in an open air
furnace parts as large as 4,000 kg
each and our largest furnace for
this is 1500 wide x 1500 high x
4500 mm long and can handle
12,000 kg.
We can temper in a vacuum
atmosphere if needed on finished
parts and our largest vacuum
furnace is 1200 mm outside
diameter x 1500 mm high and can
handle a 1250 kg load
The controlled application and
removal of heat of a metal part to
change its physical properties, to
enhance part performance or allow
further processing.
We use the gas nitride process
here. We have a state of the art
gas nitride furnace with automated
controls that is 1500 mm outside
diameter x 2500 mm high and can
handle up to 7000 kg.
Induction hardening is a type of
heat treatment in which metal parts
are heated by electromagnetic
induction and then quenched.
A heat treating process (usually
below 1250F) to remove welding,
cold working or other internal
strains to avoid part movement
during later heat treatment or
machining.
A heat treat process to bring the
microstructure into a condition that
facilitates subsequent processes by
making the part more homogenous
in structure. Usually done on
castings or forgings.
**You can find full list of heat treatment operations at the end of presentation
Quality
Machining Quality
COC, CMM report, heat treatment report, coating and painting reports provided to the
customer together with the product itself.
Manufacturing in accordance with ISO 9001 & EN 9100
Software: CAD, CAM, ERP, MRP, SPC & MCS Office
CMM Resolution 1.7 µm + L/300
Lots of calipers, gauges, templates help us to machine true product
01
Surface Treatment Quality
02 XRF (X-ray fluorescence) is a non-destructive analytical technique used to determine
the elemental composition of materials
Measuring dry film thickness on metal substrates by an electronic coating thickness
gauge with a variety of separate probes.
A pH meter measures the acidity and alkalinity of a liquid or other substance, on a
scale with a range of 0 to 14.
Surface treatment in accordance with EN 9100
Heat Treatment Quality
03 The Rockwell Hardness Scale is used to rank the hardness of materials
The Vickers hardness test method, also referred to as a micro hardness test method,
is mostly used for small parts, thin sections, or case depth work.
Microscope is most commonly used in our laboratory.
Heat treatment in accordance with EN 9100
0.1 μm resolution
Wide range of thickness
measurement.
Hardness resolution 0.1 HR
Max Height of Specimen 280
mm
Max Height of Specimen 170
mm
HighSense™ X-ray Power 400W
Mask diameter: 34 mm standard
(X/Y/Z): 1000/700/500 mm
Error Ratio(E0): 1.8 + L/333 μm
(X/Y/Z): 700/1000/600 mm
Error Ratio(E0): 1.5 + L/350 μm
(X/Y/Z): 700/1000/660 mm
Error Ratio(E0): 1.9 + L/300 μm
(X/Y/Z): 900/1200/800 mm
Error Ratio(E0): 1.6 + L/350 μm
Quality Control Equipment
**You can find full list of quality control devices & abilities at the end of presentation
CertificatesOur partners have all required certificates to guarantee high standard of quality management like EN 9100, ISO 9001 etc.
Some of the certificates owned by our partners can be sighted below.
Executive Summary
In today's world, supply chain of giant companies are spreadall over the world. This expansion accelerated the growth ofthese companies and enabled them to take a permanentplace in the market. There are many reasons for their spreadaround the world. We can list the most important of them asfollows; reaching high turnovers by selling in new markets,making use of low labor cost in developing countries andbecoming a globally recognized brand. Thanks to low laborcost and young population, Turkey is one of the mostpromising developing countries and has great potential to bea supplier of giant defense and aviation companies. Likewise,before China produced its own high-tech products, it wasproducing for many technology giants mostly from Americaand Europe. In this context, we have two big goals as PMC.First one is to provide consultancy to our experienced SMEsand allow foreign companies to access huge facilities of ourSMEs in Turkey. The second goal is that by controlling everyproduction stages, we ensures strong quality standards forcustomers while helping SMEs to meet the quality standardsof Europe and US companies.
*https://ec.europa.eu/eurostat/documents/2995521/9720156/3-11042019-BP-EN/3240675b-5513-41a4-8b28-3f5e24c55b70**https://sptnkne.ws/ANFp
Hourly Labour Cost in EU area* 30.3 euros
Hourly Labour Cost in Turkey** 2.71 euros
Detailed Machining Equipment ListNo EA Title Properties
1 1 Quaser MF 630 U 5 Axis CNC Vertical Milling - MaxPartDimension: Ø630x300 mm
2 1 Quaser MF 500 U 5 Axis CNC Vertical Milling - MaxPartDimension: Ø500x300 mm
3 1 Spinner U5. U1530 5 Axis CNC Vertical Milling - MaxPartDimension: Ø720x540 mm
4 1 Spinner U5. U1520 5 Axis CNC Vertical Milling - MaxPartDimension: Ø720x560 mm
5 2 Spinner U5. U630 5 Axis CNC Vertical Milling - MaxPartDimension: Ø650x500 mm
6 1 Haas UMC-750SS 5 Axis CNC Vertical Milling - MaxPartDimension: Ø680x500 mm
7 1 Maco U6 5 Axis CNC Vertical Milling - MaxPartDimension: Ø620x420 mm
8 1 DMG MORI CMX 50U 5 Axis CNC Vertical Milling - MaxPartDimension: Ø630x400 mm
9 1 AgieCharmillesCUT 30P 5 Axis CNC Wire EDM - Working Range(X/Y/Z):600/400/350 mm , (U/V): ±50 mm
10 1 Pinnacle QV159 4 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1500/900/850 mm
11 1 Chevalier QP2040 4 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1000/550/500 mm
12 1 Proseiki ONE 8 4 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1050/560/460 mm
13 2 Winner VMC-E850-E1000 4 Axis CNC Vertical Milling - Working Range(X/Y/Z): 850/560/560 mm
14 1 Spinner MVC 1000A 4 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1000/500/570 mm
15 1 Hummer VLC 800 4 Axis CNC Vertical Milling - Working Range(X/Y/Z): 800/460/510 mm
16 2 Haas VF-3SS 3 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1016/508/635 mm
17 1 Haas VF2 3 Axis CNC Vertical Milling - Working Range(X/Y/Z): 762/406/508 mm
18 1 Quaser MV 204 C 3 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1270/700/610 mm
19 1 Awea AF-1400 3 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1400/800/800 mm
20 1 Victor VCenter-102E 3 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1020/600/560 mm
21 1 Arion IMM 1100 3 Axis CNC Vertical Milling - Working Range(X/Y/Z): 1100/600/600 mm
22 1 Akira Seiki VQ-80 3 Axis CNC Vertical Milling - Working Range(X/Y/Z): 850/550/550 mm
23 1 Twinhorn VF-500 3 Axis CNC Vertical Milling - Working Range(X/Y/Z): 500/380/400 mm
24 1 Haas ST20Y 4 Axis CNC Lathe (CY) - Working Range: Ø298 x 572mm
25 2 Takisawa Nex 110 CNC 4 Axis CNC Lathe (CY) - Working Range: Ø450 x 650mm
26 1 Mazak QT200L 3 Axis CNC Lathe - Working Range: Ø360 x 611mm
27 1 Takisawa Nex 110 H7 2 Axis CNC Lathe - Working Range : Ø450 x 650mm
28 1 Takisawa Nex 106 2 Axis CNC Lathe - Working Range : Ø350 x 350mm
29 1 Takisawa LA300L12 2 Axis CNC Lathe - Working Range : Ø550 x 1200mm
30 1 Okuma LCS 15 2 Axis CNC Lathe - Working Range : Ø270 x 280mm
31 1 Viva Turn 2 2 Axis CNC Lathe - Working Range : Ø350 x 500mm
32 1 Z-Mat CAK 400 2 CNC Axis Lathe - Working Range : Ø400 x 180mm
33 1 Focus FBL 200 2 CNC Axis Lathe - Working Range : Ø280 x 610mm
34 2 Proseiki HCP 42 2 Axis CNC Lathe - Working Range : Ø100 x 150mm
35 1 Lico LND 42 2 Axis CNC Lathe - Working Range : Ø42 x 250mm
36 1 Magmaweld 0.20x2.5x1500 120 Kw Welding Machine
37 1 AC420 200X4000 Hydraulic Aluminum Cutting Machine
38 1 Hidroliksan Hydrolic Press
39 3 Şenmak Vertical Drilling Machine
40 2 Acrobat M5-M24 Threading Machine
41 3 Yedba M3-M12 Threading Machine
No Title Type Detail
1
Anodizing
Type I - Chromic Acid Anodizing
2 Type II - Sulfuric Acid Anodizing
3 Type III - Hard Anodizing
4
Chemical Conversion and Coating
Chemical Conversion Coatings on Aluminum• Yellow Chromate
5 • White Chromate
6 Stainless Steel Passivation
7 Black Oxide Coating
8 Passivation for Magnesium Alloys
9Phosphate Coating
• Zinc Phosphate
10 • Manganese Phosphate
11
Wet Painting
Epoxy Based Paints
12 Polyurethane Based Paints
13 Special Paints
14 Acrylic Based Paints
15 Water Based Paints
16 Ceramic Based Paints "Cerakote"
17
Plating
Electrodeposited Copper Plating(Electroplating Copper)
18Nickel Plating
• Electrodeposition of Nickel
19 • Electroless Nickel
20 Gold Plating / Gold Electroplating
21 Silver Plating / Silver Electroplating
22 Electrodeposited Coatings of Tin (Electroplating Tin)
23
Electrodeposited Zinc Coating
• Yellow Zinc Coating
24 • Blue Zinc Coating
25 • Black Zinc Coating
26
Dry Film Lubricant Coating "Technocoat"
THC-34 Solid Film Lubricant Type1
27 THC-09 Solid Film Lubricant Type2
28 THC-08 Solid Film Lubricant Type3
29 THC-10 Solid Film Lubricant Type4
30 THC-02 Solid Film Lubricant Type5
31 Masking
32 Laser Marking
Detailed Surface Treatment Capabilities
No Title Type Detail
1
Hardening
Hardening (Q&T), Press Quenching
2 Hardening (Q&T), Vacuum
3 Hardening (Q&T), Flame
4 Hardening (Q&T), Fluid Bed
5 Hardening (Q&T), Furnace
6 Flame Hardening
7 Case Hardening Low Temperature Casing (LPC)
8 Induction Hardening
9 Age Hadening
10
Annealing
Ferrous Metal Annealing, Bright
11 Nonferrous Metal Annealing, Full
12 Annealing, Homogenize
13 Annealing, Normalize
14 Annealing, Stress Relief
15Tempering
Austempering
16 Martempering
17 Stress Relief
18
Nitriding
Nitriding, Gas
19 Nitriding, Ion
20 Nitriding, Salt
21 Nitriding, Vacuum
22Carbonitriding
Carbonitriding, Gas
23 Carbonitriding, Plasma
24
Quenching
Liquid Quenching
Water
25 Brine
26 Oil
27Dry Quenching
Air
28 Solids
29Brazing
Brazing, Furnace
30 Brazing, Vacuum
31 Sanding
32 Okisdation
33
34
Detailed Heat Treatment Capabilities
Detailed Quality Control Capabilities
No EA Title Properties
1 1 Zeiss Contura 9/12/8 RDS CMM - Measurement Range(X/Y/Z): 900/1200/800 mm
2 1 Zeiss Contura 10/12/6 RDS CMM - Measurement Range(X/Y/Z): 1000/1200/600 mm
3 1 Hexagon DEA Global Silver Classic CMM - Measurement Range(X/Y/Z): 700/1000/660 mm
4 1 Hexagon DEA Global Silver Performance CMM - Measurement Range(X/Y/Z): 700/700/500 mm
5 1 Coord3 ARES 10.7.5 CMM - Measurement Range(X/Y/Z): 1000/700/500 mm
6 1 Yamer VP 300 Profile Projector - Measurment Range (X/Y): 200/100 mm
7 1 Accud PP3020 Profile Projector - Measurment Range (X/Y): 200/100 mm
8 1 Zeiss Pi Web Quality Data Management Software
9 1 Mitutoyo Dial Height Gage Series 192 - Measurment Range (Z): 400 mm
10 1 Hecagon Tesa-Hite Digital Height Gauge - Measurment Range (Z): 400 mm
11 1 Haimer Uno Premium Tool Height Measurment Device - Dimensions: Ø400/700 mm
12 1 Haimer Power Clamp Shrink fit machine - Maximum length of shrink fit chuck: 570 (mm)
13 1 Rational DC-3000 Profile Projector - Measurment Range (X/Y): 296/183 mm
14 1 Mitech MHR-150A Manual Rockwell Hardness Tester - Measuring range:HRA:20-88, HRB:20-100, HRC:20-70
15 1 Parker B-310 Contour Probey Magnetic Inspection Yoke - Leg Span: 0 - 228.6 mm
16 1 Mitutoyo MTI 0-12IN .0005 HD Digmatic Height Gage - Measurement Range (Z): 300 mm
17 1 Mitutoyo SJ-210 Portable Surface Roughness Tester - Measuring range (X): 17.5 mm
18 1 Mitech MCT200 Coating Thickness Gauge - Accuracy: ±(3%Thickness+1) μm
19 1 Emcotest Durascan 70 G5 Vickers, Knoop and Brinell Test Tasks, Load Range Between 0.25 gf and 62.5 kgf
20 1 Spectroport Portable Metal Analyzer
21 1 Leica DM 2700M Optical Microscope
22 1 Metkon Servocut 302 Abrasive Cutting Machine
23 1 Metkon Ecopress 102 Automatic Mounting Press
24 1 Struers Duramin-150 Rockwell Hardness Tester - Load range (main loads) 3 kgf - 150 kgf
25 1 NewSonic SonoDur3 Mobile UCI Hardness Tester -
26 1 Metkon Ecopress 50 Automatic Mounting Press
27 2 Bulut Makine BMS 3000 Vickers, Knoop and Brinell Test Tasks
28 1 Mitech Hardrocker Rockwell Hardness Tester
29 1 Voltcraft IR Digital Infrared Thermometer
30 1 Sinometer IR Digital Infrared Thermometer
31 1 Mitech - MH310 Leeb Hardness Tester
32 2 Mitech - MH180 Leeb Hardness Tester
33 N/A NDT Liquid Penetrant Testing & Magnetic Particle Inspection
Ostim – Yenimahalle
06378 Ankara, Turkey
+90 545 432 3893
www.pm-consultancy.info
https://www.linkedin.com/company/precison-machining-consultancy