cost accounting past papers

The Institute of Chartered Accountants of Pakistan Foundation and Modular Examinations Autumn 2001 September 08, 2001 COST ACCOUNTING (MARKS 100) FE-2 (PAPER-5) & MODULAR (PAPER D12) ‘D’ (3 hours) Q.1(a) Place each of the following expenses of a manufacturing concern within the classification

of Production, Administration and Selling and Distribution: (i) Cost of oil used to lubricate fork lifter employed in finished goods warehouse. (ii) Salary of security guards posted at cash counter located in the Karachi factory. (iii) Commission paid to sales representatives. (iv) Commission paid to company’s purchasing agent. (v) Auditors’ fee (vi) Cost of damaged raw materials. (vii) Insurance expenses on finished goods (viii) Cost of packing cartons. (ix) Cost of protective clothing for machine operators. (x) Cost of stationery used in the Lahore factory. (05)

(b) Classify the following cost as fixed, variable and semi-variable:

(i) Depreciation calculated on straight line method. (ii) Royalty expense (iii) Factory insurance (iv) Supervision and inspection (v) Industrial relations and employees’ welfare expenses (vi) Property tax (vii) Overtime costs (viii) Material handling costs (ix) Machinery repairs charges (x) Generator fuel costs. (05)

Q.2 The following information is available for the month of December 2000 of Khalid

Enterprises: Accounts payable December 01, Rs 6,000 Work in process December 01, Rs 30,000

Finished goods December 01, Rs 50,000 Material December 31, Rs 15,000 Accounts payable December 31, Rs 10,000 Finished goods December 31, Rs 60,000

Actual factory overhead Rs 150,000 Cost of goods sold Rs 300,000 Payment of accounts payable used

only for material purchases Rs 35,000

Factory overhead is applied at 200% of direct labour cost. Jobs still in process on December 31, have been charged Rs 6,000 for material and Rs 12,000 for direct labour hours (1,200 hours). Actual direct labour hours 10,000 @ Rs 8.00 per hour.

FOR FREE ACCA, CA, CAT & CIMA RESOURCES VISIT: http://kaka-pakistani.blogspot.com

http://kaka-pakistani.blogspot.com

(02)

Required : a) Material purchased b) Cost of goods manufactured

c) Applied factory overhead d) Work in process December 31,

e) Material used f) Material as on December 01

g) Over or under applied factory overhead. (14) Q.3 Emerson efficiency plan establishes a scale of bonus ratio between low task and high task

starting with zero bonus at a certain efficiency level increasing by small increments to successively large increments cumulating to a determined bonus at 100% efficiency. Above 100% efficiency, additional bonus is allowed. Khaskhkaily Enterprises adopted the Emerson efficiency plan for their cigarette packing plant which employs four (4) workers. Bonus is paid to workers in addition to basic pay which is fixed by the labour authorities. Brief synopsis of the scheme is as follows:

Efficiency rates Rates of Bonus Upto 75% efficiency 0 Bonus 76% to 85% efficiency 2.5% bonus 86% to 98% efficiency 7.5% bonus 99% and above efficiency 15% bonus Standard time 3 minutes per carton Minimum Basic pay is Rs 3,375 Information specific for the month of August 2001 is as follows: Actual packing for the month

Worker A 3,750 Cartons Worker B 4,625 Cartons Worker C 4,250 Cartons Worker D 3,350 Cartons

August 2001 consisted of 25 working days of 9 hours each and there were no absentees during the month. For the purpose of calculating standard per unit labour rate minimum efficiency is considered as normal packing. Required: Calculate the employee wise payroll cost for the month of August 2001 separately showing the basic pay and bonus payable to each employee. (15)

Q.4 A controller is interested in an analysis of the fixed and variable cost of electricity as related

to direct labour hours. The following data has been accumulated. Months Electricity Cost Direct labour hours Rupees Jan 2000 15,480 297 Feb 2000 16,670 350 Mar 2000 14,050 241 Apr 2000 15,340 280 May 2000 16,000 274 June 2000 16,000 266 July 2000 16,130 285 Aug 2000 16,350 301

Required : The amount of fixed overhead and the variable cost using. a) The high and low points method (06) b) The method of least square. (06)



(03) Q.5 SS Construction Co. have under taken the construction of a fly over for Road Development

Authority. The value of the contract is Rs.12,500,000 subject to a retention of 20% until one year after the certified completion of the contract and final approval of the authorities surveyor. The Company has given the Contract No SS/RDA/786 for reference. The following are the details as shown in the books of account of SS Construction Co. as on June 30, 2001:

Amount in Rupees Labour wages paid 4,050,000 Material purchased directly 4,200,000 Material issued from stores 812,000 Plant maintenance 121,000 Other expenses 601,000 Material in hand 63,000 Wages payable 78,000 Other expenses payable 16,000 Work not yet certified 165,000 Work certified 11,000,000 Cash received on account 8,800,000 Required: Prepare the Contract Account to show the position at June 30, 2001, retaining

an adequate provision against possible losses before final acceptance of the contract. (10)

Q.6 Shabbir Associates manufactures 3 joint products - Exe, Wye and Zee. A by-product Baye is also produced. During the month of November 2000 the joint cost for direct materials and direct labour were Rs 80,000 and 120,000 respectively. Shabbir Associates have an established practice of absorbing overhead at 50% of direct cost. Production and sales related data for the month of November 2000 is as follows:

Products Production Sales Sales Value

Kgs Kgs Rupees per Unit Exe 7,800 7,000 10.00 Wye 11,700 11,000 10.00 Zee 10,000 9,000 6.50 Baye 10,000 10,000 2.60

The sales value of by-product is deducted from the process cost before apportioning cost to each joint product. Costs of common processing are apportioned between joint product on the basis of sales value of production. Assume that there is no opening inventories. Required: Calculate profit for the month of November and analyze the profit product-wise. (10)

Q.7 New Vision Trading Company Limited is planning to arrange for a six monthly overdraft facility with a bank. However, before finalization of any arrangement it wants to know the estimated requirements of cash. For this purpose it has hired you as consultant to make an estimate of the foreseeable cash requirements.

The following is the basic data regarding various business cycles of the Company I. Sales forecast for the six months are as under:

Months Rupees January 800,000 February 950,000 March 600,000 April 900,000 May 1,100,000 June 600,000



(04)

II. Purchases are made as and when required III. No closing stock is maintained as the supplier has capability to supply any quantities at any time. IV. Gross profit ratio is maintained @ 20% of the sales price V. Various expenses for the six months are as under:

Rupees Salaries and wages

390,000

Repairs and maintenance

120,000

Insurance 6,000 Stores and spares

270,000

Duties 360,000 Legal charges 24,000

VI. The recoveries from the debtors are made as follows 50% in the month of sale 30% in the month following the month of sale 20% in the second month after sale

VII. Trade creditors are paid as under 40% in the month of purchase 40% in the month following the month of purchase 20% in the second month after purchase

VIII. All other business expenses are paid in the month of expense. Expenses are evenly spread throughout the year.

IX The Company commenced its business on January 1, 2000 with a cash balance of Rs 50,000. Required: You are required to prepare a cash budget to facilitate the company’s management in assessing the working capital requirement for the next six months. (15) Q.8 Sangdil Limited makes two products, SS and TT. The variable cost per unit are as follows: SS TT Direct Material Rs. 6.00 Rs. 18.00 . Direct Labour (Rs 18.00 per hour) Rs. 36.00 Rs. 18.00 Variable overhead Rs. 6.00 Rs. 6.00 _____ _____ Total Variable Cost Rs. 48.00 Rs. 42.00 ===== ===== The selling price per unit is Rs 84.00 for SS and Rs 66.00 for TT. During July 2001

the available direct labour is limited to 48,000 hours. Sales demand in July is expected to be 18,000 units for SS and 30,000 units for TT.

Fixed cost is Rs.200,000 per month. Required: Determine the profit-maximizing production level for the products

SS & TT. (14)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Foundation/Modular Foundation Examinations Spring 2002 March 9, 2002 COST ACCOUNTING (MARKS 100) FE-2 Paper 5 – Modular D 12 (Module D, SM, 4B) (3 hours) Q.1 (a) What are the essentials of a good wage system 06 (b) How Cost Control is different from Cost Reduction 02 (c) Define: Direct Material Total Variance and Direct Material Price Variance 04 Q.2 The following balances are appearing in the cost ledger of Marwat Engineering as at

January 1, 2002.

General ledger control account 80,000 Materials control account 35,000 Work-in-process control account 17,500 Finished goods control account 27,500

At the end of the period you are supplied the following information by the factory supervisor: Materials purchased 195,000 Materials purchased for “Special Job 420” 10,450 Materials issued for

Repair and maintenance 3,400 Capital Job 101 9,700 Special Job 420 11,200 Production 177,400

Materials returned to suppliers 1,253 Normal material lost in transit and storage ? Carriage inwards of materials 3,264 Total wages paid to employee for

Repair and maintenance 2,100 Capital Job 101 6,325 Special Job 420 19,475 Production 103,000

Indirect wages 15,325 Normal idle time ? Production expenses 21,860 Admin expenses 19,462 Selling expenses 11,231 Distribution expenses 5,433 Sales 425,000 Revenue from Special Job 420 70,000 Production overheads recovered as a percentage of prime cost 15.0%



(2)

Admin overheads recovered on finished production 20,000 Selling overheads recovered on finished production 17,500 Capital Job is completed and needs to be capitalised Special job 420 was completed and despatched to customer Inventory valuation as at January 30, 2002 Materials control account 26,500 Work-in-process control account 18,100 Finished goods control account 35,674

Required: • Prepare necessary control accounts in the cost ledger • Calculate normal loss on materials in transit and storage • Calculate normal idle time of labour • Calculate production overhead allocated to SJ420, CJ101 and normal production • Calculate profit on SJ420 • Calculate capitalised cost of CJ101 20

Q.3

a) Assuming nil opening stocks, calculate the value of the closing stock from the data provided below using each of the following methods:

• FIFO • LIFO • HIFO

Receipts Date Units Rate October 1 100 12.50 October 8 85 15.00 October 16 95 11.95 October 20 115 13.00 Issues October 2 55 October 9 65 October 12 50 October 18 25 October 20 115

12

b) List the main advantages and disadvantages of FIFO method of costing 03

c) Apollo Industries apportioned its overheads using the following bases:

i) Direct material cost iv) Machine values ii) Direct labour cost v) Area in square meters iii) Machine hours vi) Number of employees in the department



(3)

You have been requested by the Production Manager to reassess the overhead apportionment basis. You are required to provide an appropriate basis for each of the following overheads:

1. Rent and property tax 2. Repair and maintenance 3. Electric power 4. Direct material handling 5. Indirect materials 6. Indirect labour wages 7. Workmen canteen expenses 8. Insurance 9. Medical insurance 10. Factory security 05

Q.4 A one-year contract has been offered to Maliaka Industries which will uitilise an existing

machine that is only suitable for such contract works. The machine cost Rs 275,000 four years ago and has been depreciated by Rs 60,000 per year on a straight-line basis and thus has a book value of Rs 35,000. The machine could now be sold for Rs 47,500 or in one-year’s time for Rs 4,000

Four types of materials would be required for the contract as follows:

Material Units Purchase price of stocks

Current Buying price

Current resale price

Available in stocks

Required for contract

Rupees

071 1,200 450 23.00 17.00 14.50 076 200 1,250 32.00 42.00 40.50 079 3,000 800 47.00 53.50 42.00 085 1,800 1,200 33.00 13.25 12.00

Material 071 and 085 are in regular use within the firm. Material 076 could be sold if not used for the contract and there are no other uses for 079, which has been deemed to be obsolete.

The labour requirements for the contract are

First six

months Subsequent six

months First six months

Subsequent six months

Hours Required Normal wage rate in Rupees Skilled 1,350 1,276 25.00 28.75 Semi-skilled 1,400 1,225 17.00 19.00 Unskilled 1,225 1,400 15.00 16.00

It is expected that there will be shortage of skilled labour in the first six months only. Therefore, for the purposes of the contract skilled labour will have to be diverted from other work from which a contribution of Rs 7.50 per hour is earned, net of wage costs. The firm currently has a surplus of semi-skilled labour paid at full rate but doing unskilled work. The labour concerned could be transferred to provide sufficient labour for the contract and would be replaced by unskilled labour.



(4)

Overheads are generally allocated in the firm at Rs 18 per skilled labour hour which represents Rs 13 for fixed overheads and Rs 5 for variable overheads.

Required: You are required to determine the relevant cost of the contract and sales price of the contract using the following assumptions: • 10 % contribution margin is earned on the relevant cost of the contract. • Contribution margin over relevant cost is equal to 15% of selling price. 18

Q.5 A chemical compound is made by raw material being processed through two processes. The

output of process A is passed to process B where further material is added to the mix. The details of the process costs for the financial year December 2001 are as below:

Process A Direct material 2000 kgs @ Rs 5.00 per kg Direct Labour Rs 7,200 Process Plant Time 140 hrs @ Rs 60.00 per hr Expected output 80% of input Actual output 1400 kgs Normal loss is sold @ Rs 0.50 per kgs Process B Direct material 1400 kgs @ Rs 12.00 per kg Direct Labour Rs 4,200 Process Plant Time 80 hrs @ Rs 72.50 per hr Expected output 90% of input Actual output 2620 kgs Normal loss is sold @ Rs 1.825 per kgs

The department overhead for the year was Rs 6,840 and is absorbed into the costs of each process on direct labour cost. There was no opening stock at the beginning of the year.

Required: Prepare the following accounts: a) Process A 05

b) Process B 05 c) Normal loss/gain of both process 05 Q.6 In a manufacturing deptt 1 kg of product K requires two chemicals A and B. The following

are the details of product K for the month of January 2002. a) Standard mix of Chemical A is 50% and Chemical B is 50%

b) Standard price per kg of chemical A is Rs 60 and chemical B is Rs 75 c) Actual input of chemical B is 350 kgs d) Actual price of chemical A is Rs 75 e) Standard normal loss is 10% of total input f) Material Cost Variance Rs 3,250 adverse g) Material yield variance Rs 675 adverse h) Actual output 450 kgs.

Required: i) Material Mix Variance 06

ii) Material Usage Variance 03 iii) Material Price Variance 06

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Foundation Examinations Autumn 2002 September 07, 2002 COST ACCOUNTING (MARKS 100) FE-2 Paper 5 & Module D Paper D12 (3 hours)

Q.1 (a) Describe the roll of a Cost Accountant in a manufacturing unit. (04) (b) At the end of the month goods have arrived from the supplier but the relevant

invoice has either not been received or has not yet been processed for payment by the relevant department. How you would deal with the problem while preparing monthly management accounts.

(03) (c) Outline briefly a system for ascertaining idle time of a production worker

employed in a manufacturing concern.

(05) (d) A chart of accounts, accompanied by adequate instructions, is a great aid to

better accounting, costing and controlling. Explain.

(05)

Q.2 With reference to material control system, you are required to explain the meaning of:

(i) Perpetual Inventory (ii) Continuous Stock Taking (05)

Q.3 The Parrot Steel’s factory overhead rate is Rs.5 per hour. Budgeted overhead for 5,000 hours per month is Rs.30,000 and at 7,000 hours is Rs.37,000. Actual overhead for the month is Rs.29,000 and actual volume is 7,000 hours.

Required: (i) Variable overhead in overhead rate (02) (ii) Budgeted fixed overhead rate (02) (iii) Applied factory overhead rate (02) (iv) Over or under absorb factory overhead (02) (v) Spending variance (03) (vi) Idle capacity variance (03)

Q.4 A manufacturing company makes a product by two processes and the data below relates to the second process for the month of June 2002.

Work in process as on June 01, 2002 was 1,200 units represented by the following costs:

Rupees Direct material (100%) 54,000 Direct wages (60%) 34,200 Overhead (60%) 36,000 During June 4,000 units were transferred from first process @ Rs.37.50 per unit.

This cost is treated as material cost of second process.



(2)

Other costs were as follows:

Rupees Additional material 24,150 Direct Wages 164,825 Overhead 177,690 Quantitative data shows the following: Finished Goods transferred to godown 3,200 units Finished Goods in hand 500 units Normal loss 520 units Work in process (100% material and 50% wages and

overhead) 980 units

Average method of pricing is used. Required (i) Equivalent Production Statement for June 2002 (04) (ii) Process Account for the month of June 2002 (10)

Q.5 (a) What is margin of safety? (03) (b) The fixed cost of an enterprise for the year is Rs.400,000. The variable cost per

unit for a single product being made is Rs.20. Each units sells at Rs.100.

Required

(i) Break even point. (ii) If the turnover for the next year is Rs.800,000, calculate the estimated contribution and profit, assuming that the cost and selling price remain the same. (iii) A profit target of Rs.400,000 has been desired for the next year. Calculate the turnover required to achieve the desired result.

(04) (04) (04)

Q.6 (a) Explain the main functions of a cash budget and discuss briefly its importance

in a system of budgetary control. (05)

(b) Jawed Enterprises has bank balances of Rs.100,000 as on January 01, 2002. The sales forecast for the next six months are as follows:

Rupees January 850,000 February 750,000 March 800,000 April 800,000 May 900,000 June 950,000 Trend of recoveries against sales are 55% in the month of sales, 30% in next

month, 10% in the second month and 5% in the third month.



(3)

Cost of sales are 80% of sales, payable immediately to avail 5% cash discount of cost. Other costs are 10% of sales. Personal drawing are Rs.25,000 per month. Any shortfall will be financed by bank @ 12% markup p.a. worked out on the closing balance of the month. Mark up is payable next month.

Required:

(i) Cash budget for the six month ending June 30, 2002 (10)

(ii) Budgeted Income Statement for the six month ending June 30, 2002 (05)

Q.7 Baba Machine Factory manufactures equipment for textile, sugar and cement industries. The company has three sales departments who are authorized to sell directly to these industries. The following information is available for the month of June 2002.

Particulars Textile

Division Sugar

Division Cement Division

Capacity utilization 30% 30% 30% Rupees Rupees Rupees Gross sales 130,000 170,000 200,000 Net sales 120,000 150,000 200,000 Sales salaries 10,000 15,000 20,000 Storage expenses 6,000 8,000 8,000 Delivery expenses 2,000 4,000 5,000 Cost of goods manufactured as a % of gross sales 50% 60% 65% Other marketing & selling expenses are Rs.24,000 to be allocated on net sales basis.

General salary are Rs.35,000 to be allocated on manufacturing cost basis and commission to sales person are 2% of the net sales. The company is using 90% of its capacity and each of the sales department are confident that they will be able to sell the equipment if the capacity is increased to 100%. The additional cost for utilizing 100% capacity is estimated to be 5% of net incremental sales.

Required: (i) Income Statement in (columnar form) for the month of June 2002

for all the three divisions and as a whole.

(10)

(ii) Advice the management whether to increase its capacity to 100% or not. If your answer is in affirmative, the division you would suggest to increase the capacity.

(05)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Modular Intermediate Examinations Spring 2003 March 08, 2003 COST ACCOUNTING (MARKS 100) Module D Paper D 12 (3 hours) Q.1 Following transactions appeared in the books of accounts of the Company

PURCHASES

Month Quantity (Units) Cost per unit (Rs.) Jan 100 41 Feb 200 50 April 400 51.87 SALES

Month Quantity (Units) Sale price per unit (Rs.) March 250 64 May 350 70 June 100 74 There was an opening balance of 100 units for Rs.3,900. From the information given above, for the six month ended June 30, show the store

ledger records including the closing stock balance and stock valuation by using weighted average, FIFO and LIFO methods of pricing.

(09) Q.2 (a) Following is the labour data of a company for a given week:

Days Units Hours Monday 270 8 Tuesday 210 8 Wednesday 300 8 Thursday 240 8 Friday 260 8

Required:

You are required to prepare a schedule showing weekly earning, hourly rate, and the labor cost per unit assuming a 100% bonus plan with a base wage of Rs. 6/- per hour and a standard production rate of 30 units per hour.

(06) (b) What are the requirements for an incentive plan to be successful. (03)



(2) Q.3 The following data of a period relates to a manufacturing department: Budgeted Actual Direct Material Cost Rs.500,000 Rs.750,000 Direct Labour Cost Rs.500,000 Rs.550,000 Production Overhead Rs.750,000 Rs.800,000 Direct Labour Hours 100,000 130,000 During the period a Job XY 54 was completed. Direct material costing Rs.100,000

direct labour Rs.21,000 and overhead costing Rs.115,000 were incurred.

Required:

(a) Calculate predetermined production overhead absorption rate on the following basis: (i) as a percentage to direct material cost (ii) direct labour hours

(04) (b) Calculate the production overhead cost to be charged to XY54 based on rates

calculated in answer (a) above.

(04) (c) Assume that the direct labour hour rate of absorption is used. Calculate the

under or over absorbed production overheads for the period and state an appropriate treatment in the accounts.

(04) (d) If the factory overhead control account has a credit balance at the end of the

period, was overhead over applied or under applied?

(04) Q.4 ABC Limited produces four joint products Q,R,S and T, all of which result from

processing a single Raw Material Z. The following information is provided to you:

Joint Product Numbers of Units Selling price per unit Rupees

Q 5000 18 R 9000 8 S 4000 4 T 2000 11 The company budgets for a profit of 14% of sales value. Other costs are as follows: Carriage Inward 6%

Direct Wages 18% Manufacturing overhead 12% Administrative overhead 10% Required: (a) Calculate the maximum price that may be paid for the raw material. (b) Prepare a comprehensive Cost Statement for each of the products allocating the material cost and other costs based on:

(i) the numbers of units, and (ii) the sales value.

(04)

(08)



(3) Q.5 (a) List the contents of a complete budget document of a manufacturing concern. (08) (b) Explain Functional Budget. (06) Q.6 M/s Gama & Sons produces only one product by the name ‘Gama’ and the standard

manufacturing cost of the product is as under: Rupees Direct material (4 kg @ Rs.3 per kg) 12 Direct labour (5 hours @ Rs.4 per hour) 20 Variable overhead 5 Fixed overhead 15 __________ Total standard cost 52 per unit ========= The budgeted quantity to be produced is 10,000 kg and actual production was 9,500 units. The actual consumption and cost during the period was as under: Rupees Direct material ( 37,000 kg) 120,000 Direct labour (49,000 hours) 200,000 Variable overhead 47,000 Fixed overhead 145,000 __________ Total standard cost 512,000 =========

There was no stock of work in process or finished goods at the beginning or end of the period. Required: You are required to calculate the relevant cost variances

(14) Q.7 A company manufactures a single product by the name ‘BABA’. Its variable cost is

Rs.40/- and selling price is Rs.100/-. For the current year, Company expects a net profit of Rs.2,750,000 after charging a fixed cost of Rs.850,000. However the production capacity is not utilized and the Manager Marketing suggested the following for maximization of profit:

Suggestion Reduced selling price by

%

Sale volume expected to increase by

%

1 5 10 2 7 20 3 10 25

Required: (a) Evaluate the above proposals and advise the most profitable suggestions

assuming no change in the cost structure. (b) Suggest other considerations for the decisions.

(14)



(4) Q.8 A company which manufactures a uniform product is operating at 60% level of

activity. At this level the sales are Rs.60,000 at a selling price of Rs.10/- per product. The following information regarding cost is available.

Variable cost Rs. 2 per product

Semi variable cost may be considered fixed at Rs.6,000 with a variable cost of Rs.0.50 per product. Fixed cost is Rs.20,000 at the present level of activity but is estimated that achievement of an 80% - 90% level would increase cost by Rs.4,000. A proposal has been made to the Directors that the price of product should be reduced by 10% so as to reach a wider sales market. The Board is considering it and require a statement showing:

(a) the operating profit if the company is operating at level of activity of 60%, 70% and 90% assuming that selling price (i) remains as at present (ii) is reduced to Rs.9

(08) (b) The percentage increase in present output which will be required to maintain

the present profit if the Company reduces the selling price.

(04)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Autumn 2003 September 06, 2003 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 Why should semi variable expenses be separated into fixed and variable elements?

What methods are available for separating semi variable expenses?

07 Q.2 How Cash Budget assists management in making more effective use of money?

Name two methods used for the preparation of a cash budget.

09 Q.3 The estimated overheads likely to be incurred relating to a cost center with two major

machines installed are as under:

Rupees

Supervision Indirect employees, wages Earned leave Maintenance cost Power Depreciation Rent of building

8,000

10,000 5,000

15,000 20,000 5,000 2,500

65,000 Details of various allocations of the cost centers are as under Machine-1 Machine-2 Total

Running hours

1) Supervision cost 2) Capital cost of machine 3) Indirect employees 4) Total employees 5) Maintenance hours 6) Kilowatt hours 7) Floor Space

Rs Rs No No

Sq. ft

5,000

4,000

20,000 8

20 600

100,000 5,000

1,000

4,000 5,000

2 5

120 20,000 5,000

6,000

8,000

25,000 10 25

720 120,000 10,000

Required: Calculate machine hour rate for each machine.

10 Q.4 Following data pertains to a worker of a manufacturing industry.

Actual production Working hours in a week Guaranteed rate per hour Estimated time to produce one unit As an incentive the management has agreed to increase the time allowed per unit by

400 units 48 hrs Rs.10 8 minutes 20%



(02) Required:

Calculate the gross wages of the worker according to:

a) Piece work with a guaranteed weekly wages b) Under Rowan premium bonus c) Under Hasley premium bonus 50% to worker

09 Q.5 Tata Cools manufactures a range of products including Air conditioners which pass

through three processes before transfer to finished goods store. Production department for the current month has given the following production data.

P R O C E S S

1 2 3 Total

Basic Raw Material (10,000 units) Direct material – addition Direct wages Direct expenses Production overheads (to be allocated on the basis of direct wages) Output Normal loss in process of input Scrap value of each lost unit

Rs Rs Rs Rs

Rs

Units

% Rs

6,000 8,500 4,000 1,200

9,200 10

0.20

9,500 6,000

930 8,700

5 0.50

5,500 12,000 1,340

7,900

10 1.00

6,000

23,500 22,000 3,470

16,500

There was no stock at start or at the end in any process.

You are required to prepare the following accounts

a) Process 1 b) Process 2 c) Process 3 d) Abnormal Loss e) Abnormal Gain

04 04 04 04 04

Q.6 The Parrot Company sold 150,000 units @ Rs. 30 each, Variable cost is Rs. 20

(Manufacturing Rs. 15 & Marketing Rs. 5), Fixed Cost is Rs. 1,200,000 annually which occurs evenly throughout the year (Manufacturing Rs. 800,000 & Marketing Rs. 400,000) Required

i) Breakeven point in units ii) Breakeven point in Rupees iii) Number of units to be sold to earn profit before tax of Rs. 200,000 iv) Number of units to be sold to earn after tax profit of Rs. 100,000 if tax rate

is 25% v) The breakeven point in units if selling price is increased by Rs. 3 and

variable cost by Rs. 2 per unit

10



(03)

Q.7 A manufacturing concern is currently buying a component used in its finished product from a local supplier @ Rs. 2,000. The company has been informed that plant to produce this component is available and can be installed at space available with the company. Two alternative proposals are under consideration:

a) Install a semi-automatic machine in which case fixed cost will be Rs. 5,000,000 and variable cost Rs. 1,500 per unit.

b) Install an automatic machine in which case fixed cost will be Rs. 10,000,000 and variable cost Rs.1,200 per unit.

Note (Depreciation and interest costs are included in fixed cost). Required:

(i) At what level of output it is justified to install any of the above two machines.

(ii) If the annual requirement of the component is 15,000 units, which machine would you advise to install.

(iii) At what level of output would you advise the company to install automatic machine instead of semi-automatic machine.

15 Q.8 Following information pertains to Dilber Associates:

Normal capacity of a plant is 20,000 units per month or 240,000 units a year. Variable costs per unit are:

Direct material Direct labour Variable FOH

Rs. 3.00 Rs. 2.25 Rs. 0.75

Total Rs. 6.00

Fixed overheads are Rs. 300,000 per year or Rs.1.25 per unit at normal capacity. Company is using ‘units of product’ as basis for applying overheads. Fixed marketing and administrative expenses are Rs. 60,000 per year and variable marketing expenses are Rs. 3,400, Rs. 3,600, Rs. 4,000 and Rs. 3,000 for the first, second, third and fourth month respectively. Actual and applied variable overheads are the same. Likewise no material or labour variance exists. There is no work in process. Standard costs are assigned to finished goods only. The sale price per unit is Rs. 10 and actual production, sale and finished goods inventories in units are:

M O N T H S First Second Third Fourth

Units in beginning inventory Units produced Units sold Units in ending inventory

-

17,500 17,500

-

-

21,000 18,000 3,000

3,000

19,000 21,000 1,000

1,000

20,000 16,500 4,500

Required: From the above information prepare income statement through Absorption

Costing and Direct Costing methods.

20 (THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Spring 2004 March 11, 2004 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 Explain the following terms: Expense (02) Product cost (02) Semi-variable cost (02) Period cost (02) Q.2 Critically analyse the following statement:

“Labour turnover should be low whereas stock turnover should be high.” (08)

Q. 3 XYZ Company produces 200 articles of X per annum. Each article of X requires 3.8 units of material Y. Some other data is given below: Cost per unit of Y Rs. 12,500 Warehouse monthly rent Rs. 15,000 Warehouse fumigation during the year Rs. 23,000 Watchman salary per month Rs. 4,500 Per order inspection charges Rs. 10,252 Service departments factory overhead charged to Store department Rs. 10,000 Ordering department Rs. 7,050 Stock holding per annum Rs. 125 per unit Working capital cost 16% Salaries of ordering department Rs. 10,050 Broker commission on supply of Y 0.50% Per order lump sum out of pocket expenses of broker of material Y Rs. 22,048 You are required to calculate:

(a) Economic Order Quantity. (08) (b) Number of orders per annum on the basis of Economic Order Quantity. (02) (c) Verify your answer in (b) by calculating total ordering plus carrying costs per annum:

(i) Assuming higher number of orders than in (b) (03) (ii) Assuming lower number of orders than in (b) (03)



(2)

Q.4 AAB Company is planning its capacity for the year 2004 at 90% of the rated capacity. For the purpose of estimating ‘other factory overhead expenses’ company uses five years history and ‘simple regression analysis’ method. Data in hand is as under: Rated capacity 20,000 Direct labour hours at 100% capacity 25,000 Five year history of ‘Other factory overhead expenses’ is as under: Year Other factory overhead Direct labour expenses (Rs.) hours 1999 90,775 23,750 2000 83,125 18,750 2001 84,800 20,000 2002 99,084 21,000 2003 84,860 19,750 In the year 2002 other factory overhead expenses include a penalty of Rs. 12,734 on non

compliance of certain labour laws. You are required to calculate fixed and variable portions of estimated other factory overhead expenses at planned capacity. (10)

Q. 5 AAD Company’s Budgeting Department has compiled following data for decision-making: Product Demand Average Material Labour Opening in units sale price per unit per unit stock Rs. Rs. Rs. Units A 1,500 318 172 76 50 B 2,200 421 172 173 50 C 3,700 280 172 32 - Minimum order quantity of each product is 100 units. The company has Rs. 800,000 working capital in hand and a running finance line of Rs. 500,000 at 24% per annum cost. Production lead time and sales recovery period is estimated at one year. Administrative and marketing expenditure per annum are Rs. 152,700 and Rs. 72,842 respectively. Opening stock carry same unit cost as given for current year. You are required to:

(a) Prepare product sales mix that can generate maximum net profit. (08) (b) Projected Profit and Loss Statement according to your suggested product mix. (04)



(3)

Q.6 Following is the data of Department B of EFG Company for December, 2003: Work in process (opening) 8,500 units (Completed as to material 20% and conversion cost 25%) Rs. 43,860 Work in process (ending) 11,540 units (Completed as to material 50% and conversion cost 25%) Current period transactions are: Cost transferred from Department A Rs. 45,600 Units transferred from Department A 12,000 units Units mishandled and lost before start of any process 460 units Material consumed Rs. 27,654 Conversion cost incurred Rs. 47,689 Units transferred out 7,500 Normal spoilage is 6% of units transferred out and inspection is done at the end of process. Company uses FIFO method for inventory valuation. You are required to prepare production report of Department B showing Quantity Schedule, Cost Charged to Department and Heads of Account where costs have been accounted for. (20) Q.7 ABC Limited intend to commence production from July 1. They have provided following information for the first four months of operation:

PARTICULARS 1st 2nd 3rd 4th Sales in units 9,500 9,300 9,900 10,000 Selling price per unit 60 58 59 60 Cost per unit Material 20 18 19 20 Labour 10 10 10 10 Overhead 5 5 5 5 Depreciation 5 5 5 5 Administrative 3 3 3 3 Marketing 2 2 2 2 Capital expenditure - - - 50,000



(4)

Additional Information 1) Material will be purchased on cash basis. The company intends to keep stock for one month. 2) Wages to be paid at the end of the month. 3) Other costs will be accrued for one month. 4) Production for 5th month is expected to be 6,500 units. 5) Sales collections are as follows: 50% collection in first month 30% collection in second month 20% collection in third month 6) Loan from sponsors Rs 300,000 to be repaid in 5 equal monthly installments beginning from second month of operation. 7) Cash in hand to be maintained at Rs 50,000. Deficit, if any, will be financed from bank. Any surplus funds to be utilized towards payment of bank liability. Markup, if any, will be paid @ 8% p.a. every six months. 8) Cash in hand as on July 1, Rs 50,000.

Required:- (a) Budgeted profit & loss for the four months. (06) (b) Budgeted Cash flow statement for the four months. (10)

Q.8 From the following information, allocate overheads of service departments to individual producing departments by adopting algebraic method: Departmental overheads before distribution of Service Provided Departments Service Departments Dept Y Dept Z Producing Dept – A Rs 6,000 40 % 20 % Producing Dept – B Rs 8,000 40 % 50 % Service – Y Rs 3,630 - 30 % Service – Z Rs 2,000 20 % - ________ ______ ______ Total Departmental Overheads Rs 19,630 100 % 100 % ======= ===== ===== (10 )

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Autumn 2004 September 11, 2004 COST ACCOUNTING (MARKS 100) MODULE D (3 hours) Q.1 (a) Describe briefly THREE major differences between: (i) financial accounting,

and (ii) cost and management accounting. (06) (b) The incomplete cost accounts for a period of Company A are given below: Stores ledger control account Rs. 000 Opening balance 2,640 Financial ledger control A/c 3,363 Production wages control account Rs. 000 Financial ledger control A/c 2,940 Production overhead control account Rs. 000 Financial ledger control A/c 1,790 Job ledger control account Rs.000 Opening balance 1,724 The balances at the end of the period (in ‘000’) were: Stores ledger Rs.2,543 Job ledger Rs.2,295 During the period 65,000 kilos of direct material were issued from stores at a

weighted average price of Rs.48 per kilo. The balance of materials issued from stores represented indirect materials. Two thirds of the production wages are classified as ‘direct’. Average gross wage of direct workers was Rs.20 per hour. Production overheads are absorbed at a predetermined rate of Rs.30 per direct labor hour. Required: Complete the cost accounts for the period. (08)



2 Q.2 ABC Company has been manufacturing 7,280 units per month of a product and

selling the same at a price of Rs.154 per unit. With the increase in competition the customers are now asking for new contracts at a rate of Rs.140 per unit. The company has started cost/benefit analysis of various options like extra shift working, buying new technologies etc. However, as an immediate step they are going to implement 100% bonus wages plan for improvement in production capacity. Mixed expectations of the outcome of this plan are:

Owners 7,800 units per month Production manager 8,190 units per month Labour contractor 9,100 units per month

Other data is as under:

Fixed overheads Rs. 264,368 per month Variable overhead Rs. 73 per machine per hour Daily wages (8 hours shift) Rs. 200 per person Number of machines 10 Number of labour required 2 per machine Standard capacity 28 units per machine Direct material Rs. 75 per unit Working days in a month 26

Required:

Prepare a table showing per unit cost at present and various expected levels of production.

(16) Q.3 The AJFA & Co is preparing its production overhead budgets and therefore need to

determine the apportionment of these overheads to products. Cost center expenses and related information have been budgeted as below:

Total

Machine Shop A

Machine Shop B

Assembly Canteen Maintenance

Direct Wages (Rs) 518,920 128,480 99,640 290,800

Indirect Wages (Rs) 313,820 34,344 36,760 62,696 118,600 61,420

Consumable Materials(incl. Maintenance) (Rs)

67,600

25,600

34,800

4,800

2,400

Rent & Rates (Rs) 66,800

Building Insurance(Rs) 9,600

Heat & Light(Rs) 13,600

Power(Rs) 34,400

Depreciation of Machine (Rs)

160,800

Area (Sq Ft) 90,000 20,000 24,000 30,000 12,000 4,000

Value of Machines(Rs) 1,608,000 760,000 716,000 88,000 12,000 32,000

Power Usage (%) 100% 54% 40% 3% 1% 2%

Direct Labour (Hours) 72020 16020 12410 43590

Machine Usage (Hours) 54,422 14,730 37,632 2,060



3 The proportion of Maintenance cost center time spent for other cost centers is:

Machine Shop A 45% Machine Shop B 40% Assembly 13% Canteen 2% Required: Allocate the overhead expense by using the appropriate bases of apportionment.

(12) Q.4 The incomplete process account relating to period 4 for a company which

manufactures paper is shown below:

Process account

Units Rs. Units Rs. Material 4,000 16,000 Finished goods 2,750 Labour 8,125 Normal loss 400 700 Production overhead 3,498 Work in progress 700 There was no opening work in process (WIP). Closing WIP consisting of 700 units was complete as shown: Material 100% Labour 50% Production overhead 40% Losses are recognized at the end of the production process and loss units are sold at Rs.1.75 per unit.

Required:

Calculate the values of abnormal loss, closing WIP and finished goods.

(08) Q.5 (a) Explain the straight line equation Y = a + bx with reference to cost behaviour. (04)

(b) What are the limitations and problems of the equation? (05)

(c) Using the data provided below, determine the variable cost per unit and fixed

cost of 14,000 units. Output (Units) Total Cost (Rs) 11,500 204,952 12,000 209,460 12,500 212,526 13,000 216,042 13,500 221,454 14,000 226,402

(05)



4 Q.6 PQR Company manufactures product ‘E’ in 1,000 units batches and sells them in

100 unit packs. Cost data of the said product is as under:

Raw material 42 kg per unit Raw material price Rs.37 per kg for annual buying

upto 3.5 million kgs.

Rs.36.90 per kg for annual buying over 3.5 million kgs.

Direct labour Rs. 850 per unit Factory Overhead-Variable Rs.300 per unit Factory Overhead-Fixed Rs. 500,610 per month Price Rs. 2,862 per unit.

Current production level is 80,000 units per annum, which is 100% of rated capacity

of the plant. For any increase in production, there will be an increase in fixed overhead by Rs.25,000 per month.

Cost accountant of the company is of the view that the company can achieve

break-even level at lesser quantity if production is increased to avail purchase discount of Rs.0.10 per kg.

Required:

Verify the opinion of the Cost Accountant.

(10)

Q.7 GHI Company produces 817 kgs ‘Y’ for which following standard chemical mix is used:

Material Standard Quantity (Kgs) Standard Rate per kg.(Rs) A 750 38.00 B 150 53.00 C 50 59.50

Purchase department knowing the standard mix made efforts for reducing the

average price of material mix and achieved the results as under:

Rate (Rs.) A 37.00 B 56.25 C 62.75

Production department concentrating on yield aspect experienced a different ratio of

raw material mix and got 876 kgs out of following mix:

Quantity (Kgs) A 750 B 185 C 65

Required:

Find out the effect of deviation from standards by calculating:

(a) Price Variance (05) (b) Mix Variance (05) (c) Yield Variance (06)



5 Q.8 Khan Company is a small business which has the following budgeted marginal

costing profit and loss account for the month ended June 30, 2004:

Rs. Rs.

SALES 96,000 Cost of Sales: Opening stock 6,000

Production 72,000 Closing stock (14,000)

(64,000) 32,000

Other Variable Cost - selling expenses (6,400) Contribution 25,600 Fixed Costs:

Production Overhead (8,000) Administration (7,200) Selling (2,400)

Net Profit 8,000 The standard cost per unit is:

Rs. Direct material (1 Kg) 16 Direct labour (3 hours) 18 Variable cost (3 hours) 6 Budgeted selling price per unit is Rs. 60

The company’s normal level of activity is 4000 units per month. It has budgeted

fixed production costs at Rs.8,000 per month and absorbed them on the normal level of the activity of units produced.

Required:

Prepare budgeted profit and loss under absorption costing for the month ended June 30, 2004.

(10)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Spring 2005 March 12, 2005 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 (a) It is often stated that ‘actual product cost’ cannot practically be worked out.

(i) Why do you think this statement is made? (ii) If the statement is correct, is the whole cost accounting process

worthwhile?

(05)

(04) (b) (i) Explain with reasons the significance of chart of accounts for the

purpose of cost accounting.

(03) (ii) Give reasons why over- or under-absorptions of overheads may arise. (03)

Q.2 A company manufactures and retails clothing.

You are required to group costs which are listed below and numbered 1 to 20 in the following classifications (each cost is intended to belong to only one classification):

(i) Direct material (ii) Direct labour (iii) Direct expenses (iv) Indirect production overhead (v) Research and development costs (vi) Selling and distribution costs (vii) Administration costs (viii) Finance costs

1. Lubricant for sewing machines 2. Floppy disks for general office computer 3. Maintenance contract for general office photocopy machine 4. Telephone rental plus metered calls 5. Interest on bank overdraft 6. Performing Rights Society charge for music broadcast throughout the factory 7. Market research undertaken prior to a new launch 8. Wages of security guards for factory 9. Carriage on purchases of basic raw material 10. Royalty payable on production of XY 11. Road licenses for delivery vehicles 12. Parcels sent to customers 13. Cost of advertising products on television 14. Audit fee 15. Chief accountant’s salary 16. Wages of operatives in the cutting department 17. Cost of painting advertising slogans on delivery vans 18. Wages of storekeepers in a material store 19. Wages of fork lift drivers who handle raw materials 20. Developing a new product in the laboratory

(10)



(2) Q.3 Omega Limited is a manufacturer producing various items. One of its main

products has a constant monthly demand of 20,000 units. The production of this product requires two kg of chemical A. The cost of the chemical is Rs.5/- per kg. The supplier of the chemical takes six days to deliver the same from the date of the order. The ordering cost is Rs.12/- per order and the holding cost is 10% per annum. Required: (a) Calculate the following :

(i) The economic order quantity (ii) The number of orders required per year (iii) The total cost of ordering and holding the chemical A for the year.

(b) Assuming that there is no safety stock and that the present stock level is 4000 kg, when should the next order be placed?

(c) Assuming that a safety stock of 4,000 kg of chemical is maintained, what will be the holding cost per year?

(d) Discuss the problems which most firms would have in attempting to apply the EOQ formula. (12)

Q.4 The yield of a certain process is 80% as to the main product and 15% as to the by-

product. Remaining 5% is the process loss. The material put in process (10,000 units) costed Rs.21 per unit and all other charges amounted to Rs.30,000 of which power cost accounted for 33? %. It is ascertained that power is chargeable to the main product and by-product in the ratio of 10:9. Required: Draw up a statement showing the cost of the by-product.

(06) Q.5 Total Surveys Limited conducts market research surveys for a variety of clients.

Extracts from its records are as follows:

2003 Rupees in million

2004 Rupees in million

Total Costs 6.000 6.615 Activity in 2004 was 20% greater than in 2003 and there was an increase of 5% in

general costs. Activity in 2005 is expected to be 25% greater than 2004 and general costs are expected to increase by 4%. Required: (a) Derive the expected variable and fixed costs for 2005. (b) Calculate the target sales required for 2005 if Total Surveys Limited wishes to

achieve a contribution to sales ratio of 80%. (c) Discuss briefly the problems in analyzing costs into fixed and variable

elements.

(07)

(03)

(05)



(3) Q.6 Gala Promotions Limited is planning a concert in Karachi. The following are the

estimated costs of the proposed concert:

Rs.(000) Rent of premises 1,300 Advertising 1,000 Printing of tickets 250 Ticket sellers, security 400 Wages of Gala Promotions Limited Personnel employed at the concert 600 Fee of artist 1,000

There are no variable costs of staging the concert. The company is considering a

selling price for tickets at either Rs.4,000/- or Rs.5,000/- each. Required: (i) Calculate the number of tickets which must be sold at each price in order to

break-even. (ii) Recalculate the number of tickets which must be sold at each price in order to

break-even, if the artist agrees to change from fixed fee of Rs. 1 million to a fee equal to 25% of the gross sales proceeds.

(iii) Calculate the level of ticket sales for each price, at which the company would be indifferent as between the fixed and percentage fee alternative.

(iv) Comment on the factors, which you think, the company might consider in choosing between the fixed fee and percentage fee alternative.

(03)

(04)

(04)

(04) Q.7 Ali Limited makes and sells one product, the standard production cost of which is

as follows for one unit:

Rs. Direct labour 3 hours at Rs.6 per hour 18 Direct materials 4 kilograms at Rs.7 per kg 28 Production overhead Variable 3 Fixed 20 Standard production cost 69

Normal output is 16,000 units per annum and this figure is used for the fixed

production overhead calculation. Costs relating to selling, distribution and administration are:

Variable 20 percent of sales value Fixed Rs.180,000 per annum

The only variance is a fixed production overhead volume variance. There are no

units in finished goods stock at 1 October 2003. The fixed overhead expenditure is spread evenly throughout the year. The selling price per unit is Rs.140. For each of the six monthly periods, the number of units to be produced and sold are budgeted as :



(4) Six months ending

31 March 2004 Six months ending 30 September 2004

Production units 8,500 7,000 Sales units 7,000 8,000

Required:

(a) Prepare statements for the management showing sales, costs and profits for each of the six monthly periods, using (i) marginal costing (ii) absorption costing

(05) (08)

(b) Prepare an explanatory statement reconciling for each six monthly period the profit using marginal costing with the profit using absorption costing.

(03)

Q.8 Pink Ltd. is considering proposals for design changes in one of a range of soft toys.

The proposals are as follows: (a) Eliminate some of the decorative stitching from the toy. (b) Use plastic eyes instead of glass eyes in the toys. (c) Change the filling material used. It is proposed that scrap fabric left over from

the body manufacture be used instead of synthetic material which is currently being used.

On above proposals following information has been gathered by management: (1) Plastic eyes will cost Rs.30 per hundred whereas the existing glass eyes cost

Rs.40 per hundred. The eyes will be more liable to damage during insertion. It is estimated that scrap plastic eyes will be 10% of the quantity issued from stores as compared to 5% in case of glass eyes.

(2) The synthetic filling materials costs Rs.1,600 per ton. One ton of filling is sufficient for 2,000 soft toys.

(3) Scrap fabric to be used as filling material will need to be cut into smaller pieces before use and will cost Re.1 per soft toy. Scrap fabric is sufficiently available for this purpose.

(4) The elimination of decorative stitching is expected to reduce the appeal of the product, with an estimated fall in sales by 10% from the current level. It is not felt that the change in eyes or filling material will adversely affect sales volume. The elimination of the stitching will reduce production costs by Rs.6 per soft toy.

(5) Current sales level of the soft toy is 300,000 units per annum. Apportioned fixed costs per annum are Rs.4,500,000. The net profit per soft toy at the current sales level is Rs.30.

Required: Prepare an analysis which shows the estimated effect on annual profit if all three proposals are implemented and which enables management to evaluate each proposal. The proposals for plastic eyes and the use of scrap fabric should be evaluated after the stitching elimination proposal has been evaluated.

(11)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Autumn 2005 September 10, 2005 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 (a) Without an effective system of cost accounts it is doubtful whether any

business can survive in the intensely competitive conditions prevailing today. Briefly state how a cost accounting system can be used by a business entity to gain competitive advantage. (06)

(b) Management is often faced with a situation where a component which is

manufactured by their own organization has a cost, as disclosed by the cost accounts, in excess of that which would have to be paid if it were bought in the open market. However a decision whether to manufacture or buy cannot be made simply by comparing internal costs with open market prices. List the other factors which management would have to consider, both of a financial and non-financial nature, while making such a decision. (05)

Q.2 Alpha manufacturing Co. Ltd. maintains stocks on perpetual inventory system. The

bin card for stock item code No. N96 in the company's stores contains the following information for the month of June 2005: Opening stock on 01 June: 60 units, value Rs. 3,600.

Date Receipts Units

Invoice price per unit Units issued

5 June 10 June 14 June 17 June 20 June 24 June 25 June

120

40

20

100

59.00

60.50

62.00

63.00

80

80

80

The market price per unit was Rs. 60.00 on June 1, rising to Rs. 62.00 on June 10, Rs. 62.50 on June 15 and Rs. 64.00 on June 30. The standard cost may be assumed as Rs.60.00 per unit. The following methods of stock pricing are being considered: (a) LIFO (b) Weighted average (c) Standard cost (d) Replacement cost

Required:

Under each of these methods, determine the cost of issues and the closing stock as at June 30. (15)



(2) Q.3 A factory manufactures three components A, B and C.

During a week, the following was recorded:

Labour grade

Number of employees

Rate per hour (Rs.)

Individual hours worked

I II III IV

6 18 4 1

40 32 28 16

40 42 40 44

Actual output and standard times are given below:

Component Output Standard minutes per component

A B C

444 900 480

30 54 66

The normal working week is of 38 hours. Overtime is paid at a premium of 50% of the normal hourly rate. A group incentive scheme is in operation and a bonus is paid based on the time saved. The rate of bonus payment is 75% of normal hourly rate. The time saved is allocated to each labour grade in proportion to the number of hours worked by each group. Required: Calculate the total payroll showing the basic pay, overtime premium and bonus pay for each grade of labour. (12)

Q.4 The factory overhead budget of a manufacturing company for the year ending June

30, 2006 is as follows: Rupees Indirect wages 1,627,920 Insurance – labour 114,240 Supervision 514,080 Machine maintenance wages 485,520 Supplies 257,040 Power 828,240 Tooling cost 285,600 Building insurance 14,280 Insurance of machinery 399,840 Depreciation - machinery 856,800 Rent and rates 371,280 5,754,840 At present, overheads are absorbed into the cost of the company’s products at 70% of direct wages. The company is considering changing to a separate machine hour rate of absorption for each of its four different machine groups.



(3) The following are some further details of costs and machine groups:

Machine groups

A B C D TOTAL

Tooling costs (Rs.) 115,958 88,042 55,832 25,768 285,600 Supervision (Rs.) 159,340 145,471 111,877 97,392 514,080 Supplies (Rs.) 118,634 79,089 19,772 39,545 257,040 Machine maintenance hours 3,000 2,000 4,000 1,000 10,000 Number of indirect workers 6 6 2 2 16 Total number of workers 26 34 15 10 85 Floor space (Sq.ft.) 3,000 2,400 1,600 1,000 8,000 Capital cost of machines (Rs.’000) 3,200 2,400 1,000 1,800 8,400 Horse-power hours 55,000 27,000 8,000 15,000 105,000 Machine running hours 30,000 60,000 25,000 10,000 125,000

Required:

(a) Calculate a machine hour rate for each group of machines; (b) Calculate the overhead to be absorbed by product no. 123 involving: Machine group Hours

A 8 B 3 C 1 D 4

(c) Calculate the overhead to be absorbed by each unit of product 123 if the labour

cost is Rs.1,200 and the present method of absorption is used. (15) Q.5 The Quetta Cement Company produces a product branded as Falkon. It has

estimated the cost per bag of 100 kgs. as under: Rs. Direct material 100 Direct labour 160 Factory overhead 120 380 The selling price of Falkon is Rs. 450 per bag. During the month of December, the actual costs of production were as follows: Rs. Materials 200,000 Direct labour 320,000 Factory overhead 220,000 All materials are added at the beginning of production process.



(4) Production records show completed production of 2,000 units for the month; sales

records show that 1,600 units were sold during the period. Inventory records exhibit the following data: Work in process inventory December 01: Direct material, 250 units: Direct labour, 250 units ( 40% completed) Factory overhead, 250 units ( 40% completed ) Work in process inventory December 31:

200 units estimated to be 60% completed as to labour and factory overheads.

Required:

(a) Material price variance (b) Labour rate variance (c) Overhead budget variance (d) A statement of actual cost of Falkon per bag for December. (09)

Q.6 Industries Limited produces a single product and has a manufacturing capacity of

7,000 units per week of 48 hours. The output data for three consecutive weeks is given below: As cost accountant, you are asked by the company management to work out the selling price assuming an activity level of 4,000 units per week and a profit of 20% on selling price.

Units Produced

Direct Material

Direct Labour

Total Factory Overheads

(Variable & Fixed) Rs. Rs. Rs.

2,400 48,000 60,000 37,200 2,800 56,000 70,000 38,400 3,600 72,000 90,000 40,800

(07) Q.7 The Sindh Engineering Company produces a bicycle which sells at Rs.1,000 per

unit. At 80% capacity utilization which is the normal level of activity, the sales are Rs.180 million. Costs are as under:

Prime cost per unit Rs.400 Factory indirect cost Rs.30 million (including variable cost Rs.10 million) Selling costs Rs.25 million (including variable cost Rs.15 million) Distribution costs Rs.20 million (including variable cost Rs.11 million) Administration costs Rs.6 million Commission and discounts are 5% of sales value.



(5) Required:

(a) Calculate the break-even sales value. (b) Prepare statements showing sales, costs, profit and contribution margin at

each of the following levels: i) at the normal level of activity; ii) if unit selling price is reduced by 5% thereby increasing sales and

production volume by 10% of the normal activity level; iii) if unit selling price is reduced by 10% thereby increasing sales and

production volume by 20% of the normal activity level. (12) Q.8 As a cost accountant of Colombia Company, you are required to develop cash and

other budget information. The budget is to be based on the following assumptions: Sales: (a) Customers are allowed a 2% discount if payment is made within 10 days after

the billing date. Receivables are recorded at the gross selling price. (b) Sixty percent of the billings are collected within the discount period; 25% by

the end of the month; 9% by the end of the second month. Bad debts are estimated at 6% of sales.

(c) Sales are billed on the last day of the month. Purchases: (a) Sixty percent of all purchases and other expenses except salaries and wages

are paid in the same month whereas the balance is paid in the following month.

(b) Raw materials inventory at the end of each month is equal to 130% of next month’s production requirement.

(c) The cost of each unit of inventory is Rs.20. (d) Wages and salaries earned each month by employees total Rs.60,000. (e) Marketing, general, and administrative expenses (of which Rs.2,000 is

depreciation) are estimated at 15% of sales. Actual and projected sales are as follows: Rs. Rs. August ………….………… 354,000 November ………………….... 342,000 September………………… 363,000 December …………………… 360,000 October ………………… 357,000 January ……………………… 366,000 Actual and projected materials needed for production: Units Units August ………….………… 11,800 November ………………….... 11,400 September………………… 12,100 December …………………… 12,000 October ………………… 11,900 January ……………………… 12,200



(6) Wages are paid weekly. The unpaid amount at the end of each month is projected as

follows: Rs. Rs. July ……………….………. 14,000 October ……………………… 2,000 August ………….………… 6,000 November ………………….... 6,000 September………………… 10,000 December …………………… 12,000 On August 31, the following balances appeared in the company’s books of account: Rupees Cash 44,000 Accounts receivable 349,600 Inventories 247,520 Accounts payable 106,444 The above balances are expected to increase by 25% during the month of

September. Required:

Cash budget for the months of October, November and December. (19)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Spring 2006 March 11, 2006 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 (a) An important feature in the installation of any accounting or costing system is

the proper classification of accounts. The Bottlers Limited, bottlers and distributors of beverages, have recently introduced a new classification which includes the following accounts:

1. Samples 13. Freight out

2. Sugar 14. Income tax 3. Factory payroll 15. Advertising 4. Foreman’s salary 16. Rent of office building 5. Conveyance and travelling 17. Labels 6. Factory’s clerical salaries 18. Depreciation on machinery 7. Drivers’ wages 19. Insurance 8. Gas, oil and grease 20. Water 9. Depreciation of furniture & fixtures 21. Truck tyres 10. Salesmen’s salary and commissions 22. Bottle breakages 11. Light and power 23. Telephone and communication 12. Legal and audit fee 24. Stationery

Classify each account under one or more of the following headings: • Manufacturing • Selling and Distribution • Administration (06) (b) Distinguish between joint products and by-products, and briefly explain the

difference in accounting treatment between them. (04) Q.2 Eastern Limited purchases product Shine for resale. The annual demand is 10,000

units which is spread evenly over the year. The cost per unit is Rs. 160. Ordering costs are Rs. 800 per order. The suppliers of Shine are now offering quantity discounts for large orders as follows:

Ordered Quantity Unit price Rs. Upto 999 units 160.00 1000 to 1999 units 158.40 2000 or more units 156.80 The purchasing manager feels that full advantage should be taken of discounts and

purchases should be made at Rs. 156.80 per unit, using orders for 2000 units or more. Holding costs for Shine are calculated at Rs. 64 per unit per year, and this figure will not be altered by any change in the purchase price per unit

Required: Advise Eastern Limited about the best choice available to them. (10)



(2) Q.3 Mr. Azad has provided you the following information from his factory ledger for

the quarter ended 31 December 2005:

Control Account Balances as on October 1, 2005: Rupees Materials 49,500 Work in process 60,100 Finished goods 115,400 Materials purchased 108,000 Direct wages 50,200 Payments for factory overheads 30,900 Depreciation of factory building and machines 42,000 Other related information is as under: − Closing stock of raw materials and finished goods at December 31, 2005

amounted to Rs. 50,300 and Rs. 125,800 respectively. − Cost of goods produced is Rs. 222,500. − Factory overheads are absorbed in production @ 160% of direct wages. − Diesel costing Rs. 2,000 included in the factory overheads was transferred to

head office for use in generator. − A bill for repairs amounting to Rs. 12,000 undertaken at the factory remained

unpaid at the end of the quarter. − Material costing Rs. 2,400 was destroyed by rain.

Required:

Write up the following accounts: i) Materials ii) Work in process iii) Finished goods iv) Factory overheads v) Cost of goods sold (10)

Q.4 AG Electronics manufactures transistors which are used for assembling flat screen

TV. During the current year 5,000 transistors were manufactured at the following costs:

Rupees Direct material 1,000,000 Direct wages 560,000 Factory overheads: Lease rentals – equipments 90,000 Equipments Insurance 19,000 Equipments maintenance contract 200,000 Other overheads 600,000 The cost of direct materials include abnormal loss of Rs. 30,000.



(3) The following estimates have been made for the next year: 1. The production is estimated to increase by 60%.

2. The cost of direct material will increase by 20%. 3. In view of a government regulation which will become effective from July 1,

next year, the rate of wages will increase by 12%. 4. The rate of other overheads is expected to increase by 6% from the start of

next year. 40% of the other overheads are fixed costs allocated by head office.

Moon Limited, a specialist in manufacturing transistors has offered to supply the

full requirement for the next year, at a price of Rs. 400 per unit. If it is decided to discontinue the production of transistors, the plant currently in use would be returned to the leasing company but the following additional costs would have to be incurred:

Inspection Rs. 20,000 per annum Insurance Rs. 8 per transistor You are required to advise the company’s management whether it should accept the

offer of Moon Limited or continue to manufacture the transistors in-house. (10)

Q.5 The manufacturing of a chemical is carried out in three continuous processes, P1,

P2 and P3. The following data is available in respect of production during February 2006.

Particulars P1 P2 P3 Output – litres 8,800 8,400 7,000 Costs in rupees: Direct Material introduced (10,000 litres) 63,840 - - Direct wages 5,000 6,000 10,000 Direct Expenses 4,000 6,200 4,080 Work in process – opening (litres) 200 Scrap value (Rs. per unit) 1 3 5 Normal loss 10% 5% 10%

At the end of P3, 420 litres of a by-product ZOLO were produced, which was

treated further at a cost of Rs. 2 per liter. Selling and distribution expenses of Re.1 per unit were incurred and it was sold at a price of Rs. 9 per litre.

Budgeted overheads for the month were Rs. 84,000. Factory overhead absorption is

based on a percentage of direct wages. The work in process at P1 comprised material of Rs. 500 and labour and factory overheads of Rs. 1,000. There were no closing work in process in any of the processes.

Required:

Prepare the following: (a) Work in process account for each process. (b) By-product account.

(12)



(4) Q.6 Nasib Ltd. has prepared the following budgeted income statement for the year 2006: Product Caps Crowns Rings Pallets Tubes Total (Rupees in thousands)

Sales 30,800 34,300 45,500 35,700 63,700 210,000 Manufacturing costs Materials 1,540 4,620 9,240 7,700 11,550 34,650 Labour 3,500 5,600 10,500 9,800 12,600 42,000 Production overheads: Variable 1,750 2,450 2,800 3,500 5,040 15,540 Fixed 2,450 4,200 7,700 7,000 6,650 28,000 9,240 16,870 30,240 28,000 35,840 120,190 Transportation 840 2,520 5,040 4,200 4,550 17,150 Packaging 1,400 700 1,400 700 2,100 6,300 2,240 3,220 6,440 4.900 6,650 23,450 Administrative costs 4,620 5,145 6,825 5,355 9,555 31,500 Selling and advertising

expenses

5,040

3,815

3,675

3,885

5,285

21,700

Total cost 21,140 29,050 47,180 42,140 57,330 196,840 Profit 9,660 5,250 (1,680) (6,440) 6,370 13,160 The Management Accountant of the company has provided the following additional

information which describes the basis on which budgeted income statement has been prepared:

(i) Material costs include purchase cost plus 10% additional charge, which is

added in order to recover the fixed costs of storage and stores administration. (ii) Labour cost is totally variable. (iii) Fixed production overhead includes both directly attributable fixed costs and

general fixed production overheads. The general fixed production overheads amount to Rs. 21 million and have been allocated in proportion to labour costs. The attributable fixed cost is avoidable if the related product is not produced.

(iv) Transport charges include fixed costs of Rs. 3,150,000 which have been

allocated to products in proportion to their material costs. Remaining costs are variable.

(v) Selling and advertising expenses include commission of 5% of sales revenue.

The remaining amount is the advertising cost which is directly attributable to each product.

(vi) Administrative cost is fixed and is apportioned in the ratio of sales revenue. (vii) Packaging is a variable cost. The Managing Director has shown his concern that Rings and Pallets are showing

loss and affecting the financial results of the company. A study which has been carried out recently has analyzed as under:



(5) (a) Sales are influenced by advertising and can be increased upto 40% by

extensive advertising. However each 10% increase in sale would require a 75% increase in advertising expenditure.

(b) The sale of Caps or Crowns can be increased by reducing the production/sale

of the product Ring. However a reduction in sale of Ring by Re.1 would generate a sale of 45 paisas of Caps or 50 paisas of Crowns sales. This substitution will not entail any extra advertising expenditure.

The management is considering the following three options:

(i) To discontinue the product Ring and Pallets. (ii) To launch an advertising campaign which will increase the sale of each

product by 40%. (iii) To substitute the sale of Rings with the sale of Caps or Crowns.

Required: Calculate the effect of each of the above options on the profitability of the

company. (25)

Q.7 A company produces mineral water. Based on the projected annual sales of 40,000 bottles of mineral water, cost studies have produced the following estimates:

Total annual costs

(in rupees) Variable cost percentage

Material 193,600 100 Labor 90,000 70 Overhead 80,000 64 Administration 30,000 30 The production will be sold through dealers who would receive a commission of

8% of sale price. Required: (i) Compute the sale price per bottle which will enable management to realize a

profit of 10 percent of sales. (ii) Calculate the break-even point in rupees if sale price is fixed at Rs. 11 per

bottle.

(10)

Q.8 The standard raw material mix for 2200 kgs of finished product is as follows: Materials Weight (Kgs) Price per Kg

(Rs.)

Salt 1,200 1.50 Ash 600 2.00 Coata 200 3.00 Fog 400 4.00



(6) Materials used during an accounting period were as follows: Materials Weight (Kg) Price per Kg

(Rs.)

Salt 6,000 1.6 Ash 4,800 1.8 Coata 1,600 2.6 Fog 2,500 4.1 Actual production was 12,100 kg. Calculate the following materials variances: (i) Cost variance (ii) Price variance (iii) Usage variance (iv) Mix variance (v) Yield variance (13)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Autumn 2006 September 09, 2006 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 Hi-way Engineering Limited uses budgeted overhead rate for applying overhead to

production orders on a direct labour cost basis for department A and on a machine hour basis in department B.

The company made the following forecasts for August 2006: Dept A Dept B

Budgeted factory overhead (Rs.) 216,000 225,000 Budgeted direct labour cost (Rs.) 192,000 52,500 Budgeted machine hours 500 10,000

During the month, 50 units were produced in Job no. CNG-011. The job cost sheet for

the month depicts the following information:

Dept A Dept B Material issued (Rs.) 1,500 2,250 Direct labour cost (Rs.) 1,800 1,250 Machine hours 60 150

Actual data for the month were as follows: Dept A Dept B

Factory overhead (Rs.) 240,000 207,000 Direct labour cost (Rs.) 222,000 50,000 Machine hours 400 9,000

Required: (a) Compute predetermined overhead rates for each department. (02) (b) Work out the total costs and unit cost of Job no. CNG-011. (04) (c) Compute the over / under applied overhead for each department. (02) Q.2 (a) Optimum inventory level can only be determined after comparing the holding

costs with the cost of ordering.

Required:

(i) Briefly discuss the impact of holding and ordering costs on optimum inventory level.

(03)

(ii) Give three examples of costs which fall under each category. (03) (iii) What are the problems which may arise in determining the above costs? (02) (b) Two-way Engineering Limited has been experiencing stockouts on one of its

important product RD-11. Using the EOQ formula, the company places orders of 1,250 units whenever the stock level reduces to 1500 units. The records of the company show the following data relating to the usage of Product RD-11 during lead times:



(2)

Usage (Units) 1,800 1,600 1,400 1,200 1,000 Usage Probability (%) 4 6 10 20 60 The company sells RD-11 at a price of Rs. 500 per unit. The annual carrying cost of one

unit is Rs. 30. The company estimates that the cost of being out of stock is Rs. 125 for each unit.

Required: The management of the company asks you to establish an optimal safety stock for this

material and also ascertain the probability of being out of stock on your proposed safety stock level. (10)

Q.3 Tram-way Hardware Store has been owned by Mr. Petrol. He had himself made all

investment in the business and had not obtained any financing. He appointed a junior accountant to maintain the manual accounting records. During the month of August, he asked his accountant to provide certain information including estimates as he was planning to withdraw some amount for his personal use.

After the failure of his accountant to provide the required information, he has hired your

services for this purpose. You have gathered the following information from the records:

(i) Sales for August 2006 amounted to Rs. 5,000,000. (ii) Sales forecast for the next three months was as follows: Rs. September 6,000,000 October 5,000,000 November 5,500,000 (iii) Based on past experience, collections are expected to be 56 percent in the month

of sale and 43 percent in the month following the sale. One percent remains uncollected

(iv) Gross margin on sales is 20% and cost of goods sold comprises of purchase cost only.

(v) 80 percent of the goods are purchased in the month prior to the month of sale and 20 percent are purchased in the month of sale. Payment for goods is made in the month following the purchase.

(vi) Other monthly recurring expenses which are paid in cash amount to Rs. 40,700. (vii) Annual depreciation on fixed assets is Rs. 555,600. (viii) Annual staff salaries are budgeted at Rs. 600,000. (viii) Bad debts provision as at August 31, 2006 stands at Rs. 190,400. (ix) Balances of some other accounts as at August 31, 2006 are as follows: Rs. Fixed assets 9,940,000 Acc. depreciation 1,900,500 Owner’s capital 2,800,000 Profit and loss 8,380,000 Cash and bank 1,980,940 Required: (a) Prepare a balance sheet as at August 31, 2006. (06) (b) Calculate the projected balance in accounts payable as on September 30, 2006. (02) (c) Prepare a projected income statement for the month of September 2006. (03)



(3)

Q.4 One-way Limited is engaged in manufacturing and sale of socks. The sales of the company are mostly to USA and European Countries. At the end of the first quarter, the results of operations of the company are as follows:

Rs. Sales (Rs. 40 per unit) 5,300,000 Less: Material 1,987,500

Wages 795,000 Variable overhead 397,500 Fixed overhead 848,000

4,028,000 Gross profit 1,272,000

The factory was working at 40% capacity in the first quarter. Management of the

company has estimated that the quantity sold could be doubled next quarter if the selling price was reduced by 15%. The variable costs per unit will remain the same, but certain administrative changes to cope with the additional volume of work would increase the fixed overhead by Rs. 15,000.

Required: (a) Evaluate the management’s proposal. (05) (b) What quantity would need to be sold next quarter in order to yield a profit of Rs.

2,000,000 if the selling price was reduced as proposed, variable cost per unit remains the same and fixed overheads increased as estimated above? (02)

(c) Calculate the selling price needed to achieve a profit of Rs. 2,000,000 if the quantity sold last quarter cannot be increased, material prices increase by 12%, wage rates increased by 15%, variable overheads are higher by 10% and fixed overheads increase by Rs. 15,000. (04)

Q.5 Mid-way Services Limited received an urgent order for installation of 4 machines in a

textile mill. Immediately after receiving the order, the company deputed four engineers on the job. Each engineer was responsible for installation of one machine. The standard time to complete this job was 50 hours.

It is the policy of the company to pay its engineers on job to job basis. The minimum

amount the company pays is based on standard hours. The payment is made at the rate of Rs. 100 per hour.

In order to speed up the installation work, the company offered the engineers ‘Time

Saving Bonus’ (TSB) under which they would be entitled for the following incentives: Percentages of time saved

to time allowed TSB

0% to 10% 10% of time saved x hourly rate 11% to 20% 20% of time saved x hourly rate 20% to 30% 30% of time saved x hourly rate In addition to the agreed amount, the customer has agreed to pay the company Rs. 150

for every hour saved on installation of each machine. The jobs were completed successfully and the time spent by each engineer is as follows: Engineers A B C D Hours spent 41 36 46 50



(4)

Required: (i) Calculate the total earning of each engineer and their earning per hour. (08) (ii) Compute the net additional revenue earned by the company. (03) Q.6 Broad-way Manufacturing Limited produces two products DL-1 & DL-2. The

production involves two processes, I and II. The following data is available in respect of production during the month of August 2006.

Process I Process II Rs. Rs. Material issued 375,000 100,000 Direct wages paid 150,000 200,000 Direct expenses incurred 100,000 100,000

During the month of August, materials issued to Process I and Process II were 1,250

tons and 230 tons respectively. The cost of output of Process – I is charged to Process – II. Incidental to production, two by-products i.e. PT-1 and PT-2 are generated in the first process and treated as a credit to Process-I.

Following additional information is also available: Sales Product Tons Rs.

Packing Cost

DL-1 100 600,700 20,070 DL-2 900 1,203,500 100,350 PT-1 200 10,000 - PT-2 50 2,500 -

A shortfall occurs in Process II due to evaporation which is considered as normal loss.

There were no opening or closing stocks. Required: (a) Calculate joint processing costs and apportion them between DL-1 and DL-2 on

the basis of sales value. (08) (b) Prepare summary trading account for the month showing net profit of each

product. (02) Q.7 Run-way Pakistan Limited has provided you the following information about its sales,

production, inventory and variable/ fixed costs etc. for the second quarter of the year 2006.

Rupees Sales

Operating profit Variable manufacturing costs per unit Fixed factory overhead per unit Marketing & administrative expenses (Fixed Rs. 250,000)

75,000,000 5,171,100

10 11

450,000

Units Sales Actual production Budgeted production Ending inventory Normal capacity Production in quarter – I Sales in quarter – I

3,000,000 2,420,100 3,000,000

320,200 3,500,000 3,100,150 2,200,050



(5)

The Sales Manager claims that the operating profit of the quarter has been wrongly calculated and is much higher than Rs. 5,171,100.

It is the policy of the company to compute applied factory overhead on the basis of

quarterly budgeted production volume and charge over or under applied factory overhead to the cost of goods sold account at the end of each quarter.

Required: (a) You are required to prepare income statements under the present method being

used by the company and also under marginal costing method for the satisfaction of Sales Manager. (09)

(b) Reconcile the difference in operating profit under the two methods. (04) Q.8 Sub-way Furnishers (Pvt.) Limited manufactures three garden furniture products –

Chairs, Benches and Tables. The budgeted data of each of these items is as under:

Chairs Benches Tables

Budgeted sales volume 4,000 2,000 1,500 Selling price per unit (Rs.) 3,000 7,500 7,200 Cost of Timber per unit (Rs.) 750 2,250 1,800 Direct labour per unit (Rs.) 600 1,500 1,600 Variable overhead per unit (Rs.) 450 1,125 1,200 Fixed overhead per unit (Rs.) 675 844 1,350

The budgeted volume was worked out by the sales department and the management of

the company is of the view that the budgeted volume is achievable and equal to the demand in the market.

The fixed overheads are allocated to the three products on the basis of direct labour

hours. Production department has provided the following information:

Direct labour rate Rs. 40 per hour Cost of timber Rs. 300 per cubic meter A memo from Purchase Manager advises that because of the problem with the supplier

only 25,000 cubic meters of timber shall be available.

The Sales Director has already accepted an order for the following quantities which if

not supplies would incur a financial penalty of Rs. 200,000.

Chairs 500 Benches 100 Tables 150 These quantities are included in the overall budgeted volume. Required: Work out the optimum production plan and calculate the expected profit that would

arise on achievement of this plan. (14)

Q.9 Smart-ways Manufacturing Limited makes a product called LPG. Most of the

manufacturing expenses incurred during the production of LPG are directly identifiable as fixed or variable. However, some of the expenses are partly fixed and partly variable. The management of the company wants to determine the fixed and variable element of these overheads.



(6)

The total of such overheads which are partly fixed and partly variable, during each of the last 10 months and the related production is given hereunder:

Month No. of

Units Factory

Overhead (Rs.)

1 3,000 7,200 2 4,000 9,000 3 6,000 12,150 4 5,000 11,250 5 6,000 11,700 6 5,000 10,800 7 7,000 12,600 8 6,000 11,250 9 5,000 10,350

10 3,000 7,200 50,000 103,500

Required:

Determine the fixed and variable element of the above overheads on the basis of high low method and define the relationship in terms of cost volume formula. (04)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Spring 2007 March 07, 2007 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 The marketing department of Moon Engineering Limited has prepared the following

projected profit and loss account:

2007 2008 Rupees in million

Sales 750.0 800.0 Less: Direct materials

Direct labour Production overhead

187.5 112.5 135.0

200.0 120.0 144.0

435.0 464.0 Contribution margin 315.0 336.0 Less: Fixed costs 297.8 312.7 Net Profit 17.2 23.3

The marketing director is not happy with the sales growth shown in the forecasts. Similarly, the finance director has shown his concern on the lower profitability. They have also pointed our certain factors which were ignored while developing the above projections. Consequently, a comprehensive study was carried out at all levels which has resulted in the following revisions:

(i) Sales forecast for 2007 has been projected at Rs. 1.0 billion. (ii) Sales prices are projected to remain the same in 2008. However, the total sales have

been projected to increase by 20% over the year 2007. (iii) Material prices and costs of production overheads in 2008 will be higher by 10% as

compared to 2007; (iv) Fixed costs will remain the same except for an expenditure of Rs. 12 million to be

incurred on a special advertising campaign during the year 2008.

Required: (a) Revise the projected profit and loss account for both years; (b) Calculate breakeven sales and margin of safety% for 2007 and 2008; (c) Draw a profit volume chart in respect of each year.

(05) (04) (04)

Q.2 (a) The production and cost data of Planet Manufacturing (Pvt.) Limited for the year 2006 and projections for the year 2007 are as follows:

2006 2007 Production (units) 175,000 225,000 Total costs (Rs.) 11,900,000 16,518,600

The rate of inflation in 2007 has been estimated at 15%.

Required: Calculate the fixed and variable costs for 2007 in ‘real’ terms.

(05)

(b) What is a ‘cost unit’ and ‘cost center’? Give two examples of each. (04)



(2)

Q.3 Star Chemicals Limited uses three processes to manufacture a product “ST”. After the third process the product is transferred to finished goods warehouse.

The following data for the month of January 2007 is available: P R O C E S S

I II III ----------Rs. in thousands------- Raw material – A 1,500 - - Other direct materials 2,500 3,200 4,000 Direct wages 5,000 6,000 8,000 Direct expenses 1,600 1,885 2,020

Following additional information is also available: (i) Production overheads are absorbed @ 80% of direct wages; (ii) 20,000 units of raw material ‘A’ having a cost of Rs. 1,500,000 were initially put in

process-I. (iii) In each process, an amount of Rs. 500,000 has been wrongly classified as direct

wages, instead of indirect wages. (iv) The actual output obtained during the month was as under:

Process I 18,500 units

Process II 16,000 units Process III 16,000 units

(v) Normal loss in each process is 10%, 10% and 5% respectively. Scrap value per unit is

Rs. 100 for process-I, Rs. 200 for process-II and Rs. 300 for process-III. (vi) There was no stock at the start or at the end of any process.

Required:

Prepare the following in the books of Star Chemicals Limited: (a) Ledger account for each process; (b) Abnormal gain/(loss) account.

(12) (04)

Q.4 Venus Pharmaceutical Company Limited faced a very high labour turnover during the

last year. The issue has now been settled after the announcement of an attractive payment plan.

Following data relating to last year has been made available to you:

(i) Sales during the last year was Rs. 726 million and contribution margin was 10% of

sales; (ii) Total number of actual direct labour hours was 510,000; (iii) As a result of delays by the Personnel Department in filling vacancies, 10,000

potential productive hours were lost. All these potential lost hours could have been sold at the prevailing rate;

(iv) The actual direct labour hours included 40,000 hours attributable to training new recruits, out of which 25% of the hours were unproductive;

(v) The labour turnover resulted in following additional costs:

Rupees Recruitment costs 284,000 Selection costs 128,500 Required:

Calculate the profit foregone by the company during the last year on account of labour turnover.

(05)



(3)

Q.5 The production engineering staff of Skyline Company Limited, has set the following standard mix for the production of one unit of Product X:

Weight

(Kg) Rate Per Kg

(Rs.) Amount

(Rs.) Material A 0.50 10.00 5.00 Material B 0.30 5.00 1.50 Material C 0.20 2.00 0.40 1.00 6.90 Standard loss (10%) 0.10 - 0.90 6.90

Actual costs incurred on the production of 927,000 units were as follows: Weight

(Kg) Rate Per Kg

(Rs.) Material A 530,000 10.00 Material B 280,000 5.30 Material C 190,000 2.20

Required: (a) Calculate the mix and yield variances.

(b) Reconcile actual material costs with the standard costs. (06) (05)

Q.6 The following figures have been extracted from the budget of Uranus Limited for the

year ended June 30, 2007: Rupees

Direct labour Electricity Repairs and maintenance Depreciation Other expenses

35,000,000 25,000,000

5,200,000 14,200,000

8,000,000 Budgeted annual production is 40,000 units. It is the policy of the company to charge

factory overhead on the basis of direct labour costs. Following additional information is available for the first six months:

Direct material consumed (Rs.)

Direct labour cost (Rs.) Factory overhead applied (Rs.)

16,250,000 17,500,000

?

Good units produced 20,000 Spoiled units (considered abnormal) 750 Spoiled units were sold for Rs. 1,200 per unit. Actual direct labour cost includes the cost

of bringing certain defective units to saleable condition, amounting to Rs. 100,000. Required:

Prepare journal entries to record the transactions that took place during the first six months of the year and support your answer with computation. (17)



(4)

Q.7 Sun Fashions (Pvt.) Limited, a chain of retail garments store, has planned to introduce a new fancy dress for babies at all its seven outlets in the country.

The company is also considering to introduce a matching crown scarf and handbag with

the new dress. Currently they are expecting to sell 15,000 dresses in the first six months but the management feels that this sale can be increased by 30% if matching crown scarf and handbag are marketed together.

The data relating to sales and production of dress, crown scarf and handbag are as

follows:

(i) Each dress requires three and half meter of cloth which is easily available in the market at a price of Rs. 100 per meter. Part of the material left unused can be used to manufacture a crown scarf and handbag.

(ii) The cost of cutting the dress, crown scarf and handbag is Rs. 35, Rs. 15 and Rs. 20 respectively.

(iii) The leftover pieces can be sold as under: − if only the dress is manufactured, Rs. 20 per dress; − if crown scarf and handbag is also manufactured, Rs. 5 per set.

(iv) The company has a contract with a designer firm at a monthly fee of Rs. 1,500,000. However, in the case of handbag and crown scarf, the company will have to pay a one time additional amount of Rs. 150,000 to the designer firm.

(v) Each handbag will require a metal hook which is available in the market at Rs. 10 per hook. However, the company has sufficient number of metal hooks in stock which was purchased at Rs. 6 per hook. If the company does not opt for the manufacturing of handbags, these hooks can be sold at Rs. 8 per hook.

(vi) The dresses, crown scarves and handbags are expected to be sold according to the following mix:

Complete set 60%

Dress and crown scarf only 10% Dress and handbag only 20% Dress only 10%

(vii) The selling price and variable costs (besides those mentioned above) of each product

are as follows:

Selling Price per

unit (Rs.) Variable Costs

(besides those mentioned above)

Dress 2,000 40% of selling price Crown scarf 400 55% of selling price

Handbag 500 60% of selling price

Required: Calculate the incremental profit or loss as a result of manufacturing handbags and crown

scarves with the dress.

(16) Q.8 Jupiter Manufacturing Company Limited consists of two manufacturing departments and

one service department. The company applies factory overhead on the following basis:

Manufacturing Department

A-1 70% of direct labour cost A-2 Rs. 40 per direct labour hour



(5)

Following relevant information is available: Manufacturing Dept. Service

A-1 A-2 Department Direct materials (Rs.) 433,000 313,000 Direct labour (Rs.) 388,800 259,200 Direct labour hours 3,500 4,000 Number of employees 140 220 40 Floor space (Sq. ft.) 1500 1500 750

The other expenses are as under: Rupees

Indirect labour 217,400 Factory office expenses 43,200 Depreciation of computer 45,000 Factory building expenses 54,000 Service department’s expenses 112,800

Indirect labour and service department’s expenses are apportioned on the basis of direct

labour cost. Factory expenses and computer depreciation are allocated in the ratio of number of employees to all the departments including service department.

Required:

Prepare a factory overhead distribution statement showing over / under applied FOH for each department.

(13)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Autumn 2007 September 07, 2007 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 Binary Limited manufactures three joint products viz. Aay, Bee and Cee in one

common process. Following this process, product Aay and Bee are sold immediately while product Cee is subjected to further processing. Following information is available for the period ended June 30, 2007:

(i) Aay Bee Cee Opening stock in kg Nil Nil Nil Production in kg 335,000 295,000 134,000 Sales in kg 285,000 212,000 - Sales price per kg (Rs.) 30.85 40.38 -

(ii) Total costs of production were Rs 17,915,800.

(iii) 128,000 kg of Cee were further processed during the period and converted into 96,000 kg of Zee. The additional cost of further processing were as follows:

Direct labour Rs. 558,500 Production overhead Rs. 244,700

(iv) 94,000 kg of Zee was sold during the period, with total revenue of Rs. 3,003,300. Opening stock of Zee was 8,000 kg, valued at Rs 172,800. FIFO method is used for pricing transfers of Zee to cost of sales.

(v) 8,000 kg of a bye-product Vee was also produced during further processing and

sold @ Rs. 10 per kg. Sales proceeds of bye-product are adjusted against production cost of product Zee.

(vi) The cost of production is apportioned among Aay, Bee and Cee on the basis of weight of output.

(vii) Selling and administration costs of Rs. 2,500,000 were incurred during the period. These are allocated to all the main products based on sales value.

Required: Prepare a profit and loss account for the period, identifying separately the profitability

of each of the three main products. (19)

Q.2 Hexa (Private) Limited is engaged in the supply of a specialized tool used in the

automobile industry. Presently, the company is incurring high cost on ordering and storage of inventory. The procurement department has tried different order levels but has not been able to satisfy the management.

The Chief Financial Officer has asked you to evaluate the current situation. He has provided you the following information:

(i) The annual usage of inventory is approximately 8,000 cartons. The supplier does not accept orders of less than 800 cartons. The cost of each carton is Rs. 2,186.

(ii) The average cost of placing an order is estimated at Rs 14,000 and presently two orders are placed in each quarter.



(2)

(iii) The sales are made on a regular basis and on average, half of the quantity ordered is held in inventory. The cost of storage is considered to be 16% of the value of inventory.

Required: (a) Determine the following:

− Economic Order Quantity (EOQ). − Number of orders to be placed, based on EOQ.

(b) Compute the ordering costs and storage costs in the existing situation. How much cost can be saved if quantity ordered is equal to EOQ as determined in (a) above.

(10)

Q.3 Octa Limited manufactures a single product under the brand name “Pak Pure”. The latest estimates related to the current year are as follows:

Production and sales (units) 25,000 Cost per unit

Direct material (Rs.) 40 Direct labour (Rs.) 20 Fixed overhead (Rs.) 15 Variable overhead (Rs.) 5

Total cost per unit (Rs.) 80

During the next year, the costs per unit are expected to increase as under:

% Direct material 20 Direct labour 10 Fixed overhead 5 Variable overhead 20

It is the policy of the company to set the selling price at the time of budget preparation at cost plus 50%. The Sales Manager is worried about the implications of this policy. According to his estimate, demand for the product will vary with price as follows:

Price (Rs.) 100 105 110 115 Demand (thousand units) 25 23 21 20

The Production Manager has informed that a different type of raw material is also available in the market at a cost of Rs. 42.30 per unit. He believes that the new material will give an acceptable quality of output. However, as a result of using cheaper material, a process of inspection will have to be introduced which will cost Rs. 30,000 per annum. The chances of rejection are 2% and 3% for raw material and finished goods respectively.

Required: (a) Determine the price which will maximize the profit.

(b) Decide whether the company should continue to use the present type of raw material or switch over to the new one. (10)

(Round off all the figures to two decimal places).

Q.4 Nooruddin Ahmed is planning to start a new business. He will invest his saving amounting to Rs. 3,500,000 and intends to make borrowing arrangements with a bank to meet the working capital requirements. His planning is based on the following estimates:

(i) He has identified a factory cum office premises at a monthly rent of Rs. 80,000 which will be payable in advance at the beginning of each month. However, he needs to give three months rent as security deposit to the landlord before occupying the space. Other fixed overheads excluding depreciation are estimated at Rs. 120,000 per month which will be paid in the same month.



(3)

(ii) He has signed a contract for supply of machinery costing Rs. 1,800,000. The payment will be made at the time of delivery in January 2008. This machinery has an estimated life of five years with no residual value.

(iii) Production will start in January 2008 and 60% of the next month’s sales will be

manufactured in January 2008. Thereafter, the production will consist of 40% of the current month’s sales and 60% of the next month’s sales.

(iv) He estimates the following sales for the first five months: Month Unit Rupees

January - - February 2,400 3,120,000 March 3,200 4,160,000 April 4,000 5,200,000 May 4,800 6,240,000

(v) Sales will be made on credit basis. A 5% cash discount will be allowed for

payments in the current month. It is estimated that 35%of each month’s sales will qualify for this discount. Balance 65% will be recovered in the next month.

(vi) Variable production cost per unit has been estimated as: Rupees

Direct material 600 Direct labour 200 Variable overhead 100 Total variable cost per unit 900

(vii) Raw materials costing Rs. 1,600,000 will be purchased in January 2008 in cash.

Thereafter, he intends to follow a policy of purchasing 50% of the monthly requirement in the same month and 50% of the next month’s requirement. All purchases after January shall be made on 30 days credit.

(viii) Salaries shall be paid in the first week of subsequent month. (ix) 70% of the variable overheads shall be paid in the same month and 30% in the

next month.

Required: Prepare a cash budget for the months January 2008 to April 2008 showing the balance

of cash / running finance at the end of each month. (20)

Q.5 Quadra Electronics assembles and sells three products – W, X and Y. The cost per unit

for each product is as follows: W X Y Rupees Rupees Rupees Direct materials 4,880 1,600 1,000 Direct labour 4,000 2,000 700 Variable overheads 1,360 480 348 Fixed production overheads 1,172 1,290 960 Total cost per unit 11,412 5,370 3,008 The fixed overheads are worked out on the basis of normal production levels i.e 15,000;

45,000; and 60,000 units per annum for W, X and Y respectively. The fixed selling and administrative costs for the next year are expected to be

Rs. 71,270,400.



(4)

Management estimates that the ratio of sales quantities of W, X and Y shall be 1:3:4 and selling price per unit shall be Rs. 12,800; Rs. 6,000 and Rs. 3,600 respectively.

Required: (a) Calculate the number of units of W, X and Y to be sold in order to achieve break

even. (b) Calculate the break even sales in terms of Rupees. (16)

Q.6 Ternary Packages is located at a remote site in an industrial estate which is far away

from the center of the city. Management of the company is now considering to provide pick and drop facility to its employees. A two member committee has reviewed the available options and has come up with a proposal to purchase three vans and run them on three different routes i.e. A, B and C. The information for each van is as follows:

Rupees Purchase price 1,200,000 Expected trade-in value after 4 years 200,000 Insurance per annum 50,000 Quarterly service including change of lubricants 4,000 Replacement of spare parts per 20,000 km 15,000 Vehicle License fee per annum 8,000 Tyre replacements after 40,000 km 14,000 Cost of diesel per litre 40

Annual running for each van will be as follows: km Van on route A 80,000 Van on route B 120,000 Van on route C 160,000

The committee has estimated that average running will be 16 km per litre.

Required: (a) Prepare a schedule to be presented to the management showing following costs in

respect of each van for the first year of operation:

− Total variable cost − Total fixed cost − Total cost

− Variable cost per km − Fixed cost per km − Total cost per km

(b) Briefly explain why the cost per km is different in each case. (15) Q.7 Decimal World (Pvt) Limited is engaged in the manufacturing of standard and scientific

calculators. The company operates a bonus scheme for all its factory workers. A performance bonus is incorporated into the wages by adding 75% of the efficiency ratio in excess of 100% to the basic hourly rate. The following information is available for the month of July 2007:

Basic rate of pay per hour (Rs.) 125Standard production per hour (units) 4 Production during the period (units) 226,176 Actual hours spent 45,600

Required: (a) Calculate the hourly wage rate inclusive of performance bonus.

(b) Calculate the total labour cost variance. (10)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Spring 2008 March 7, 2008 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 Mirza Limited is engaged in the manufacturing of spare parts for automobile industry. The

company records the purchase and issue of materials in a store ledger which is not integrated with the financial ledger. It is the policy of the company to value inventories on weighted average basis. The valuation is carried out by the Finance Department using stores memorandum record. A physical stock count is carried out after every six months. Any shortage/excess is then adjusted in the financial as well as stores ledger.

On December 31, 2007, physical stock count was conducted by the Internal Auditor of the

company. He submitted the following statement to the Finance Department:

Balance (in units) Cost per unit (Rs.)

Item Code Store Ledger

Financial Records Physical Average Current

010-09 20,500 20,500 20,000 2.00 2.25 013-25 10,000 10,000 10,000 4.00 1.50 017-10 5,500 5,500 5,000 1.00 1.10 022-05 4,000 4,500 5,500 2.00 2.00 028-35 1,200 1,200 1,000 2.75 2.50 035-15 640 600 600 3.00 3.50

On scrutinizing the details, Finance Department was able to ascertain the following reasons: Item Code Reasons 010-09

500 units were defective and therefore the Internal Auditor excluded them while taking the physical count.

013-25

This item is not in use and is considered obsolete. The net realizable value is Rs. 0.60 per unit.

017-10 Shortage is due to theft. 022-05

A receipt of 1,000 units was not recorded. The remaining difference is due to errors in recording the quantity issued.

028-35

200 units returned to a supplier were not recorded. The invoiced cost was Rs. 3 per unit.

035-15 Discrepancy is due to incorrect recording of a Goods Receipt Note. Required: (a) Prepare necessary Journal entries to record the adjustments in the financial ledger.

(b) State how would you make the necessary adjustments in the stores ledger? (14)

Q.2 (a) Explain the treatment of under-absorbed and over-absorbed factory overheads. Give

three reasons for under-absorbed / over absorbed factory overheads. (06)



(2)

(b) On December 1, 2007 Zia Textile Mills Limited purchased a new cutting machine for Rs. 1,300,000 to augment the capacity of five existing machines in the Cutting Department. The new machine has an estimated life of 10 years after which its scrap value is estimated at Rs. 100,000. It is the policy of the company to charge depreciation on straight line basis.

The new machine will be available to Cutting Department with effect from February

1, 2008. It is budgeted that the machine will work for 2,600 hours in 2008. The budgeted hours include:

− 80 hours for setting up the machine; and − 120 hours for maintenance.

The related expenses, for the year 2008 have been estimated as under: (i) Electricity used by the machine during the production will be 10 units per hour

@ Rs. 8.50 per unit. (ii) Cost of maintenance will be Rs. 25,000 per month. (iii) The machine requires replacement of a part at the end of every month which will

cost Rs. 10,000 on each replacement. (iv) A machine operator will be employed at Rs. 9,000 per month. (v) It is estimated that on installation of the machine, other departmental overheads

will increase by Rs. 5,000 per month. Cutting Department uses a single rate for the recovery of running costs of the

machines. It has been budgeted that other five machines will work for 12,500 hours during the year 2008, including 900 hours for maintenance. Presently, the Cutting Department is charging Rs. 390 per productive hour for recovery of running cost of the existing machines.

Required: Compute the revised machine hour rate which the Cutting Department should use

during the year 2008. (08) Q.3 Ayub Sports Limited produces boxing gloves which are in great demand in the local as well

as international market. Because of better quality and lesser competition in the market, the company’s profit has approximately doubled in 2007. A summary of company’s expenses and profit for the year 2006 and 2007 are as under:

2007 2006

Rupees Rupees Materials consumed 140,000 100,000Wages 120,000 80,000Overheads – Fixed 32,000 30,000Overheads – Variable 34,000 24,000Net profit 20,500 10,000

In 2007, sales prices were increased by 10% as compared to 2006. The material prices and

rate of wages increased by 10% and 20% respectively in 2007. In a meeting held to evaluate the performance of various departments, significant

differences arose among the departmental heads. Therefore the Managing Director of the company asked the CFO to analyse the financial performance objectively.

Required: Being the CFO of the company carry out an analysis to determine the increase/decrease in

profit in 2007, due to sales price, sales volume, material price, material consumption, labour efficiency, labour rate, variable overheads and fixed overheads. (17)



(3)

Q.4 Fazal Industries Limited is currently negotiating a contract to supply its products to K-Mart, a large chain of departmental stores. K-Mart finally offered to sign a one year contract at a lump sum price of Rs. 19,000,000.

The Cost Accountant of Fazal Industries Limited believes that the offered price is too low.

However, the management has asked you to re-assess the situation. The cost accountant has provided you the following information:

Statement of Estimated Costs (Project: K-Mart)

Notes Rupees Material:

X (at historical cost) (i) 1,500,000 Y (at historical cost) (ii) 1,350,000 Z (iii) 2,250,000

Labour: Skilled (iv) 4,050,000 Unskilled (v) 2,250,000 Supervisory (vi) 810,000

Overheads (vii) 8,500,000 Total cost 20,710,000

You have analysed the situation and gathered the following information: (i) Material X is available in stock. It has not been used for a long time because a

substitute is currently available at 20% less than the cost of X. (ii) Material Y was ordered for another contract but is no longer required. Its net realizable

value is Rs. 1,470,000. (iii) Material Z is not in stock. (iv) Skilled labour can work on other contracts which are presently operated by semi-

skilled labour who have been hired on temporary basis at a cost of Rs. 325,000 per month. The company will need to give them a notice of 30 days before terminating their services.

(v) Unskilled labour will have to be hired for this contract. (vi) Two new supervisors will be hired for this contract at Rs. 15,000 per month. The

present supervisors will remain employed whether the contract is accepted or not. (vii) These include fixed overheads absorbed at the rate of 100% of skilled labour. Fixed

production overheads of Rs. 875,000 which would only be incurred if the contract is accepted, have been included for determining the above fixed overhead absorption rate.

Required: Prepare a revised statement of estimated costs using the opportunity cost approach, for the

management of Fazal Industries and state whether the contract should be accepted or not. (14) Q.5 Ishaq Limited manufactures plastic bottles for pharmaceutical companies. It has recently

introduced a 100% weekly group bonus plan with a guaranteed wage of Rs. 150 per hour. Standard production per hour is 50 bottles. Each worker is supposed to work 8 hours a day from Monday to Friday and 5 hours on Saturday. Presently, there are 20 workers who are entitled for this plan. Production for the first week under the 100% bonus plan was:

Days Mon Tue Wed Thu Fri Sat

No. of bottles 8,700 7,350 9,750 7,500 8,950 4,550

Most of the workers have raised objection on the company’s bonus plan. They are of the

view that bonus calculation should be based on daily production instead of weekly production. The management of the company has asked you to determine the impact of such a change.



(4)

Required: Prepare statements showing labour cost per unit under each of the two options. Give reasons for the differences, if any.

(10)

Q.6 Yahya Limited produces a single product that passes through three departments, A, B and C.

The company uses FIFO method for process costing. A review of department A’s cost records for the month of January 2008 shows the following details:

Units Material

Rs. Labour

Rs. Work in process inventory as at January 1, 2008 (75% complete as to conversion costs)

16,000

64,000

28,000

Additional units started in January 2008 110,000 - - Material costs incurred - 430,500 - Labour costs incurred - - 230,000Work in process inventory as at January 31, 2008 (50% complete as to conversion costs)

18,000

-

-

Units completed and transferred in January 2008 100,000 - -

Overhead is applied at the rate of 120% of direct labour. Normal spoilage is 5% of output.

The spoiled units are sold in the market at Rs. 6 per unit.

Required: Compute the following for the month of January:

(a) Equivalent production units. (b) Costs per unit for material, labour and factory overhead. (c) Cost of abnormal loss (or gain), closing work in process and the units transferred to

the next process. (16) Q.7 Zulfiqar Limited makes and sells a single product and has the total production capacity of

30,000 units per month. The company budgeted the following information for the month of January 2008:

Normal capacity (units) 27,000

Variable costs per unit: Production (Rs.) Selling and administration (Rs.)

110 25

Fixed overheads: Production (Rs.) Selling and administration (Rs.)

756,000 504,000

The actual operating data for January 2008 is as follows: Production 24,000 units

Sales @ Rs. 250 per unit 22,000 units Opening stock of finished goods 2,000 units

During the month of January 2008, the variable factory overheads exceeded the budget by

Rs. 120,000. Required: (a) Prepare profit statement for the month of January using:

− marginal costing; and − absorption costing.

(b) Reconcile the difference in profits under the two methods. (15)

(THE END)



THE INSTITUTE OF CHARTERED ACCOUNTANTS OF PAKISTAN Intermediate Examinations Autumn 2008 September 5, 2008 COST ACCOUNTING (MARKS 100) Module D (3 hours) Q.1 Binary Ltd. (BL) manufactures three products, A, B and C. It is the policy of the company to

apportion the joint costs on the basis of estimated sales value at split off point. BL incurred the following joint costs during the month of August 2008:

Rs. in ‘000

Direct material 16,000 Direct labour 3,200 Overheads (including depreciation) 2,200 Total joint costs 21,400

During the month of August 2008 the production and sales of Product A, B and C were

12,000, 16,000 and 20,000 units respectively. Their average selling prices were Rs. 1,200, Rs. 1,400 and Rs.1,850 per unit respectively.

In August 2008, processing costs incurred on Product A after the split off point amounted to

Rs. 1,900,000.

Product B and C are sold after being packed on a specialized machine. The packing material

costs Rs. 40 per square foot and each unit requires the following:

Product Square feet

B 4.00 C 7.50

The monthly operating costs associated with the packing machine are as follows:

Rupees Depreciation 480,000 Labour 720,000 Other costs 660,000

All the above costs are fixed and are apportioned on the basis of packing material consumption in square feet.

Required: (a) Calculate the joint costs to be apportioned to each product. (13) (b) BL has received an offer from another company to purchase the total output of Product B

without packaging, at Rs. 1,200 per unit. Determine the viability of this offer.

(03) Q.2 Alpha Motors (Pvt.) Ltd. uses a special gasket for its automobiles which is purchased from a

local manufacturer. The following information has been made available by the procurement department:

Annual requirement (no. of gaskets) 162,000

Cost per gasket (Rs.) 1,000 Ordering cost per order (Rs.) 27,000 Carrying cost per gasket (Rs.) 300



(2)

The gaskets are used evenly throughout the year. The lead time for an order is normally 11 days but it can take as much as 15 days. The delivery time and the probability of their occurrence are given below:

Delivery time (in days) Probability of Occurrence

11 68% 12 12% 13 10% 14 6% 15 4%

Required: (a) Compute the Economic Order Quantity (EOQ) and the total Ordering Costs based on

EOQ. (b) What would be the safety stock and re-order point if the company is willing to take:

a 20% risk of being out of stock? a 10% risk of being out of stock?

(04)

(08) Note: Assume a 360 day year. Q.3 (a) Hexa Limited uses a standard costing system. The following profit statement summarizes

the performance of the company for August 2008:

Rupees

Budgeted profit 3,500 Favorable variance:

Material price 16,000 Labour efficiency 11,040 27,040

Adverse variance: Fixed overheads (16,000) Material usage (6,000) Labour rate (7,520) (29,520)

Actual profit 1,020

The following information is also available: Standard material price per unit (Rs.) 4.0

Actual material price per unit (Rs.) 3.9 Standard wage rate per hour (Rs.) 6.0 Standard wage hours per unit 10 Actual wages (Rs.) 308,480 Actual fixed overheads (Rs.) 316,000 Fixed overheads absorption rate 100% of direct wages

Required: Calculate the following from the given data: (a) Budgeted output in units (b) Actual number of units purchased (c) Actual units produced (d) Actual hours worked (e) Actual wage rate per hour (15) (b) State any two possible causes of favourable material price variance, unfavourable

material quantity variance, favourable labour efficiency variance and unfavourable labour rate variance. (04)



(3)

Q.4 Decimal World Limited manufactures and sells modems. It manufactures its own circuit boards (CB), an important part of the modem. The present cost to manufacture a CB is as follows:

Rupees

Direct material 440 Direct labour 210 Variable overheads 55 Fixed overheads

Depreciation 60 General overheads 30

Total cost per unit 795

The company manufactures 400,000 units annually. The equipment being used for

manufacturing CB has worn out completely and requires replacement. The company is presently considering the following options:

(A) Purchase new equipment which would cost Rs. 240 million and have a useful life of six

years with no salvage value. The company uses straight-line method of depreciation. The new equipment has the capacity to produce 600,000 units per year. It is expected that the use of new equipment would reduce the direct labour and variable overhead cost by 20%.

(B) Purchase from an external supplier at Rs.730 per unit under a two year contract. The total general overheads would remain the same in either case. The company has no other

use for the space being used to manufacture the CBs.

Required: (a) Which course of action would you recommend to the company assuming that 400,000

units are needed each year? (Show all relevant calculations) (b) What would be your recommendation if the company’s annual requirements were

600,000 units? (c) What other factors would the company consider, before making a decision?

(07) (06)(03)

Q.5 Octa Electronics produces and markets a single product. Presently, the product is

manufactured in a plant that relies heavily on direct labour force. Last year, the company sold 5,000 units with the following results:

Rupees

Sales 22,500,000 Less: Variable expenses 13,500,000 Contribution margin 9,000,000 Less: Fixed expenses 6,300,000 Net income 2,700,000

Required: (a) Compute the break-even point in rupees and the margin of safety. (04) (b) What would be the contribution margin ratio and the break-even point in number of units

if variable cost increases by Rs. 600 per unit? Also compute the selling price per unit if the company wishes to maintain the contribution margin ratio achieved during the previous year. (05)

(c) The company is also considering the acquisition of a new automated plant. This would result in the reduction of variable costs by 50% of the amount computed in (b) above whereas the fixed expenses will increase by 100%. If the new plant is acquired, how many units will have to be sold next year to earn net income of Rs. 3,150,000.

(03)



(4)

Q.6 Ternary Engineering Limited produces front and rear fenders for a motorcycle manufacturer. It has three production departments and two service departments. Overheads are allocated on the basis of direct labour hours. The management is considering to change the basis of overhead allocation from a single overhead absorption rate to departmental overhead rate. The estimated annual overheads for the five departments are as under:

Production Departments Service Departments

Fabrication Phosphate Painting Inspection Maintenance -------------------------Rs. in 000--------------------------------

Direct materials 6,750 300 750 Direct labour 1,200 385 480 Indirect material 30 75 Other variable overheads 200 70 100 30 15 Fixed overheads 480 65 115 150 210 Total departmental expenses 8,630 820 1,445 210 300

Maximum production capacity 20,000 25,000 30,000 Direct labour hours 24,000 9,600 12,000 Machine hours 9,000 1,000 1,200 Use of service departments:

Maintenance - Labour hours 630 273 147 Inspection - Inspection hours 1,000 500 1,500

Required: (a) Compute the single overhead absorption rate for the next year.

(b) Compute the departmental overhead absorption rates in accordance with the following: The Maintenance Department costs are allocated to the production department on the

basis of labour hours. The Inspection Department costs are allocated on the basis of inspection hours. The Fabrication Department overhead absorption rate is based on machine hours

whereas the overhead rates for Phosphate and Painting Departments is based on direct labour hours.

(06)

(10) Q.7 Unity Electronics Limited manufactures and supplies condenser fans used in the production of

Refrigerators to Sigma Corporation. The company earns a contribution margin of Rs. 600 on each unit sold before charging the labour cost. Following information is available from the company’s records.

Number of employees 180

Standard working hours (9 hours/day) 54 Standard hours per unit (at 100% efficiency) 3 Standard labour rate per hour (Rupees) 30

Due to the rise in demand for Refrigerators, Sigma Corporation has increased the size of its

order. However, the management is concerned about the productivity of its labour force. An analysis of the employees performance report has revealed that the company is suffering on account of the following: A tendency to waste time as a result of which approximately 9 working hours are lost per

week per employee. A tendency to work inefficiently, as a result of which the production efficiency is only 74%.

In order to meet the increased demand, the management is considering an increase in wages by Rs. 5 per hour. The increase is likely to motivate the employees and reduce the wastage of time by 5 hours and will also improve the production efficiency to 88%.

Required: Advise whether Unity Electronic Limited should revise the wages. Show all necessary

supporting calculations.

(09)

(THE END)



cost accounting past papers

Documents

following cost

cost of packing cartons

direct labour cost

cost of oil

determined bonus

additional bonus

emerson efficiency plan

x cost of stationery