corrugated - id machinery · built with transpak mercury strapping head and dc brushless motor...
TRANSCRIPT
TP-702C series is a high performance strapping machine designed for the corrugated industry. It o�ers the high strapping productivity with the most cost-e�ective solution.In this category, we have following models:
● High speed corrugated strapper TP-702C ● Corrugated 4-side bundle squaring and strapping system TP-702CQ● Corrugated 3-side bundle squaring and strapping system TP-702CCQ● Bundle Turner for corrugated carton C-BT
STRAPPERSTRAPPERCORRUGATEDCORRUGATED
CorrugatedIndustryCorrugatedIndustry
MERCURY TP-702C
Combined with TP-702CQ for squaring and strapping in the flute direction.
Bundle Turner for Corrugated Carton
C-BT
Designed Specifically for the Corrugated Industry
C-BT Bundle Turner is designed for turning the bundle for downstream strapping operation. It is an ideal machine for connecting in the casemaking line for strapping in the carton flute direction.
All specifications are subject to change without notice.10.2015x2000
15F-1, NO. 17, SEC. 1, CHENGDE ROAD, TAIPEI 103, TAIWANTEL: 886 2 2555 2515FAX: 886 2 2555 2516WEB: www.transpakcorp.comE-mail: [email protected]
Main Features● Suitable for various bundle dimensions.● The table height is adjustable from 700 mm to 1000 mm.● Up and down stream interlock with complete plug connection.● Robust and sturdy frame.
C-BT Technical Data
Conveyor SpeedInfeed: 15 – 65 m/minute
Exit: 18 – 75 m/minute
Table Size C-BT-L 1662 mm(W) x 2400 mm(D)
C-BT-M 1662 mm(W) x 1880 mm(D)
Minimum Bundle Size
300 mm(L) x 200 mm(W) x 20 mm(H)
Bundle Weight max 35 kg
Electrical Requirements220V, 380V, 400V 50/60Hz 3PH
700
~100
0
1422
~172
2
1662
115
1938
2400
471
831 100~710
Bundle Flow
(C-BT-L)
High Speed Corrugated Strapper
TP-702C
Designed Specifically for the Corrugated Industry
The TP-702C corrugated strapper is built with Transpak Mercury strapping head and DC brushless motor technology. It’s also equipped with the state-of-the-art Siemens PLC, electronic controls, proximity sensors, etc. Higher strapping speed, less maintenance requirement, and proven reliability make it particularly suitable for the sheet plants.
Robust & Compact Mechanical Strapping Head TP-702C uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made. The strapping head has no belts, clutches, or pulleys. It is designed with the up-to-date technology with few moving parts. With 30% fewer parts, TP-702C requires fewer adjustments, has fewer wear components, and requires less maintenance. The simple design of TP-702C minimizes the maintenance cost.
Main Features
Siemens PLC Control Siemens PLC is the state‐of‐the‐art controller. It is programmable and can be expanded flexibly to meet various requirements in different applications.
Free Access to Strap Guides (patents registered) Unblocking the guides enables free and quick access to strap guides without use of any tool. The most maintenance friendly design.
TP-702C Technical DataArch Size
TP-702C-XL 2050 mm(W) x 450 mm(H)
TP-702C-L 1650 mm(W) x 450 mm(H)
TP-702C-M 1250 mm(W) x 450 mm(H)
Strap Width 5 mm, 6 mm, or 9 mm PP strap
Strap Tension 1-32 kg
Capacity Up to 33 bundle/minute (single strap)
20 bundle/minute (double straps)
(Model: TP-702C-L)
Minimum Bundle Size
300 mm(L) x 200 mm(W) x 20 mm(H)
Bundle Weight max 40 kg
Transport Speed 15 – 60 m/minute
Electrical Requirements220V, 380V, 400V 50/60Hz 3PH
Extra Large Arch Size (TP-702C-XL) Extra large arch size (2050 mm in width) available for the larger bundle up to 2000 mm in width.
Hinged Roller Table Easy to open the table top if maintenance is required. Ergonomic design.
Options● Siemens HMI (touch panel)● Light tree alarm with low strap sensor (triple lamp)● Adjustable backstop● Foot pedal switch● Strapping cycle counter
Auto Strap EjectorLoop-eject clears unwanted strap automatically. Eliminate downtime.
Patented Jammed-strap Ejection DeviceMake it easy to remove jammed-strap.
Full-width Pneumatic PressProvide the highest reliability and stability for the movement of pneumatic press.
Multiple Strap FunctionFor single, double, continuous strapping, or transit mode. Variable Conveyor SpeedFully automatic operation with variable conveyor speed between 15 and 60 meter/minute. Strap End EjectorEject end of strap from the inlet of strap feeding. Easy to clean the end of strap and get the machine ready for next coil of strap. Adjustable Table HeightThe table height is adjustable between 700 mm and 1000 mm.
More Features
(TP-702C-L)
1650330
465 60
070
0~10
00 1420
~172
0
2310
775
Bundle Flow
High Speed Corrugated Strapper
TP-702C
Designed Specifically for the Corrugated Industry
The TP-702C corrugated strapper is built with Transpak Mercury strapping head and DC brushless motor technology. It’s also equipped with the state-of-the-art Siemens PLC, electronic controls, proximity sensors, etc. Higher strapping speed, less maintenance requirement, and proven reliability make it particularly suitable for the sheet plants.
Robust & Compact Mechanical Strapping Head TP-702C uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made. The strapping head has no belts, clutches, or pulleys. It is designed with the up-to-date technology with few moving parts. With 30% fewer parts, TP-702C requires fewer adjustments, has fewer wear components, and requires less maintenance. The simple design of TP-702C minimizes the maintenance cost.
Main Features
Siemens PLC Control Siemens PLC is the state‐of‐the‐art controller. It is programmable and can be expanded flexibly to meet various requirements in different applications.
Free Access to Strap Guides (patents registered) Unblocking the guides enables free and quick access to strap guides without use of any tool. The most maintenance friendly design.
TP-702C Technical DataArch Size
TP-702C-XL 2050 mm(W) x 450 mm(H)
TP-702C-L 1650 mm(W) x 450 mm(H)
TP-702C-M 1250 mm(W) x 450 mm(H)
Strap Width 5 mm, 6 mm, or 9 mm PP strap
Strap Tension 1-32 kg
Capacity Up to 33 bundle/minute (single strap)
20 bundle/minute (double straps)
(Model: TP-702C-L)
Minimum Bundle Size
300 mm(L) x 200 mm(W) x 20 mm(H)
Bundle Weight max 40 kg
Transport Speed 15 – 60 m/minute
Electrical Requirements220V, 380V, 400V 50/60Hz 3PH
Extra Large Arch Size (TP-702C-XL) Extra large arch size (2050 mm in width) available for the larger bundle up to 2000 mm in width.
Hinged Roller Table Easy to open the table top if maintenance is required. Ergonomic design.
Options● Siemens HMI (touch panel)● Light tree alarm with low strap sensor (triple lamp)● Adjustable backstop● Foot pedal switch● Strapping cycle counter
Auto Strap EjectorLoop-eject clears unwanted strap automatically. Eliminate downtime.
Patented Jammed-strap Ejection DeviceMake it easy to remove jammed-strap.
Full-width Pneumatic PressProvide the highest reliability and stability for the movement of pneumatic press.
Multiple Strap FunctionFor single, double, continuous strapping, or transit mode. Variable Conveyor SpeedFully automatic operation with variable conveyor speed between 15 and 60 meter/minute. Strap End EjectorEject end of strap from the inlet of strap feeding. Easy to clean the end of strap and get the machine ready for next coil of strap. Adjustable Table HeightThe table height is adjustable between 700 mm and 1000 mm.
More Features
(TP-702C-L)
1650330
465 60
070
0~10
00 1420
~172
0
2310
775
Bundle Flow
TP-702CQ
Robust & Compact Mechanical Strapping Head TP-702C uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made. The strapping head has no belts, clutches, or pulleys. It is designed with the up-to-date technology with few moving parts. With 30% fewer parts, TP-702C requires fewer adjustments, has fewer wear components, and requires less maintenance. The simple design of TP-702C minimizes the maintenance cost.
Designed Specifically for the Corrugated Industry
Main Features
Siemens PLC Control and HMI Siemens PLC is the state‐of‐the‐art controller. It is programmable and can be expanded flexibly to meet various requirements in different applications. The Siemens HMI (touch panel) provides easy adjustments, operating instructions, and troubleshooting guides.
Free Access to Strap Guides (patents registered) Unblocking the guides enables free and quick access to strap guides without use of any tool. The most maintenance friendly design.
TP-702CQ is built with TP-702C
corrugated strapper combined with
the 4-side squaring station C1-BQ.
The backstop, pusher, and side
squaring provide the precise
bundle control and assure the
bundle integrity during the
strapping cycle. Easy bundle size
change setup eliminates the
downtime and makes the
production more efficient . Truly
user friendly machine for your
casemaking and Flexo Folder Gluer
line.
4-Side Squaring Bundle Control Excellent side squaring, backstop, and pusher ensure the integrity of the bundle before strapping.
Hinged Roller Table Easy to open the table top if maintenance is required. Ergonomic design.
TP-702CQ Technical Data
Arch SizeTP-702CQ-L 1650 mm(W) x 450 mm(H)
TP-702CQ-M 1250 mm(W) x 450 mm(H) Strap Width 5 mm, 6 mm, or 9 mm PP strap
Strap Tension 1-32 kg
Capacity Up to 17 bundle/minute (single strap)
13 bundle/minute (double straps)
Minimum Bundle Size
350 mm(L) x 200 mm(W) x 50 mm(H)
Bundle Weight max 35 kg
Transport Speed 15 – 60 m/minute
Electrical Requirements220V, 380V, 400V 50/60Hz 3PH
Corrugated 4-Side Bundle Squaring and Strapping System
Options● Light tree alarm with low strap sensor (triple lamp)● LCD display for squaring position setup● Foot pedal switch
Auto Strap EjectorLoop-eject clears unwanted strap automatically. Eliminate downtime.
Patented Jammed-strap Ejection DeviceMake it easy to remove jammed-strap.
Full-width Pneumatic PressProvide the highest reliability and stability for the movement of pneumatic press.
Multiple Strap FunctionFor single, double, continuous strapping, or transit mode. Variable Conveyor SpeedFully automatic operation with variable conveyor speed between 15 and 60 meter/minute. Strap End EjectorEject end of strap from the inlet of strap feeding. Easy to clean the end of strap and get the machine ready for next coil of strap. Adjustable Pressure on Press and SquaringEasily adjustable to adapt di�erent bundle requirements.
More Features
330 1650
700~
1000 22
17~2
517
465
2369
2310
2292 Bundle
Flow
3271
1801 716
Bundle Flow
(TP-702CQ-L)
TP-702CQ
Robust & Compact Mechanical Strapping Head TP-702C uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made. The strapping head has no belts, clutches, or pulleys. It is designed with the up-to-date technology with few moving parts. With 30% fewer parts, TP-702C requires fewer adjustments, has fewer wear components, and requires less maintenance. The simple design of TP-702C minimizes the maintenance cost.
Designed Specifically for the Corrugated Industry
Main Features
Siemens PLC Control and HMI Siemens PLC is the state‐of‐the‐art controller. It is programmable and can be expanded flexibly to meet various requirements in different applications. The Siemens HMI (touch panel) provides easy adjustments, operating instructions, and troubleshooting guides.
Free Access to Strap Guides (patents registered) Unblocking the guides enables free and quick access to strap guides without use of any tool. The most maintenance friendly design.
TP-702CQ is built with TP-702C
corrugated strapper combined with
the 4-side squaring station C1-BQ.
The backstop, pusher, and side
squaring provide the precise
bundle control and assure the
bundle integrity during the
strapping cycle. Easy bundle size
change setup eliminates the
downtime and makes the
production more efficient . Truly
user friendly machine for your
casemaking and Flexo Folder Gluer
line.
4-Side Squaring Bundle Control Excellent side squaring, backstop, and pusher ensure the integrity of the bundle before strapping.
Hinged Roller Table Easy to open the table top if maintenance is required. Ergonomic design.
TP-702CQ Technical Data
Arch SizeTP-702CQ-L 1650 mm(W) x 450 mm(H)
TP-702CQ-M 1250 mm(W) x 450 mm(H) Strap Width 5 mm, 6 mm, or 9 mm PP strap
Strap Tension 1-32 kg
Capacity Up to 17 bundle/minute (single strap)
13 bundle/minute (double straps)
Minimum Bundle Size
350 mm(L) x 200 mm(W) x 50 mm(H)
Bundle Weight max 35 kg
Transport Speed 15 – 60 m/minute
Electrical Requirements220V, 380V, 400V 50/60Hz 3PH
Corrugated 4-Side Bundle Squaring and Strapping System
Options● Light tree alarm with low strap sensor (triple lamp)● LCD display for squaring position setup● Foot pedal switch
Auto Strap EjectorLoop-eject clears unwanted strap automatically. Eliminate downtime.
Patented Jammed-strap Ejection DeviceMake it easy to remove jammed-strap.
Full-width Pneumatic PressProvide the highest reliability and stability for the movement of pneumatic press.
Multiple Strap FunctionFor single, double, continuous strapping, or transit mode. Variable Conveyor SpeedFully automatic operation with variable conveyor speed between 15 and 60 meter/minute. Strap End EjectorEject end of strap from the inlet of strap feeding. Easy to clean the end of strap and get the machine ready for next coil of strap. Adjustable Pressure on Press and SquaringEasily adjustable to adapt di�erent bundle requirements.
More Features
330 1650
700~
1000 22
17~2
517
465
2369
2310
2292 Bundle
Flow
3271
1801 716
Bundle Flow
(TP-702CQ-L)
Designed Specifically for the Corrugated Industry
Main Features
TP-702CCQThe TP-702CCQ is built with TP-702C
corrugated strapper combined with
the 3-side squaring station CC-BSS.
It offers high strapping productivity
with the most cost-effective bundle
squaring solution for the corrugated
industry.
3-Side Squaring Bundle Control Excellent side squaring and backstop ensure better bundle shape before strapping.
Corrugated 3-Side Bundle Squaring and Strapping System
Robust & Compact Mechanical Strapping Head TP-702C uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made. The strapping head has no belts, clutches, or pulleys. It is designed with the up-to-date technology with few moving parts. With 30% fewer parts, TP-702C requires fewer adjustments, has fewer wear components, and requires less maintenance. The simple design of TP-702C minimizes the maintenance cost.
Siemens PLC Control Siemens PLC is the state‐of‐the‐art controller. It is programmable and can be expanded flexibly to meet various requirements in different applications.
Free Access to Strap Guides (patents registered) Unblocking the guides enables free and quick access to strap guides without use of any tool. The most maintenance friendly design.
Hinged Roller Table Easy to open the table top if maintenance is required. Ergonomic design.
TP-702CCQ Technical Data
Arch SizeTP-702CCQ-L 1650 mm(W) x 450 mm(H)
TP-702CCQ-M 1250 mm(W) x 450 mm(H) Strap Width 5 mm, 6 mm, or 9 mm PP strap
Strap Tension 1-32 kg
Capacity Up to 26 bundle/minute (single strap)
20 bundle/minute (double straps)
(Model: TP-702CCQ-L)
Minimum Bundle Size
300 mm(L) x 200 mm(W) x 20 mm(H)
Bundle Weight max 40 kg
Transport Speed 15 – 60 m/minute
Electrical Requirements220V, 380V, 400V 50/60Hz 3PH
Options● Siemens HMI (touch panel)● Light tree alarm with low strap sensor (triple lamp)● Foot pedal switch● Strapping cycle counter
Auto Strap EjectorLoop-eject clears unwanted strap automatically. Eliminate downtime.
Patented Jammed-strap Ejection DeviceMake it easy to remove jammed-strap.
Full-width Pneumatic PressProvide the highest reliability and stability for the movement of pneumatic press.
Multiple Strap FunctionFor single, double, continuous strapping, or transit mode. Variable Conveyor SpeedFully automatic operation with variable conveyor speed between 15 and 60 meter/minute. Strap End EjectorEject end of strap from the inlet of strap feeding. Easy to clean the end of strap and get the machine ready for next coil of strap. Adjustable Pressure on Press and SquaringEasily adjustable to adapt di�erent bundle requirements.
More Features
1470
~172
0 465
600
750~
1000
1650
1509
2310
2168
724
1077
5
Bundle Flow
(TP-702CCQ-L)
Designed Specifically for the Corrugated Industry
Main Features
TP-702CCQThe TP-702CCQ is built with TP-702C
corrugated strapper combined with
the 3-side squaring station CC-BSS.
It offers high strapping productivity
with the most cost-effective bundle
squaring solution for the corrugated
industry.
3-Side Squaring Bundle Control Excellent side squaring and backstop ensure better bundle shape before strapping.
Corrugated 3-Side Bundle Squaring and Strapping System
Robust & Compact Mechanical Strapping Head TP-702C uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made. The strapping head has no belts, clutches, or pulleys. It is designed with the up-to-date technology with few moving parts. With 30% fewer parts, TP-702C requires fewer adjustments, has fewer wear components, and requires less maintenance. The simple design of TP-702C minimizes the maintenance cost.
Siemens PLC Control Siemens PLC is the state‐of‐the‐art controller. It is programmable and can be expanded flexibly to meet various requirements in different applications.
Free Access to Strap Guides (patents registered) Unblocking the guides enables free and quick access to strap guides without use of any tool. The most maintenance friendly design.
Hinged Roller Table Easy to open the table top if maintenance is required. Ergonomic design.
TP-702CCQ Technical Data
Arch SizeTP-702CCQ-L 1650 mm(W) x 450 mm(H)
TP-702CCQ-M 1250 mm(W) x 450 mm(H) Strap Width 5 mm, 6 mm, or 9 mm PP strap
Strap Tension 1-32 kg
Capacity Up to 26 bundle/minute (single strap)
20 bundle/minute (double straps)
(Model: TP-702CCQ-L)
Minimum Bundle Size
300 mm(L) x 200 mm(W) x 20 mm(H)
Bundle Weight max 40 kg
Transport Speed 15 – 60 m/minute
Electrical Requirements220V, 380V, 400V 50/60Hz 3PH
Options● Siemens HMI (touch panel)● Light tree alarm with low strap sensor (triple lamp)● Foot pedal switch● Strapping cycle counter
Auto Strap EjectorLoop-eject clears unwanted strap automatically. Eliminate downtime.
Patented Jammed-strap Ejection DeviceMake it easy to remove jammed-strap.
Full-width Pneumatic PressProvide the highest reliability and stability for the movement of pneumatic press.
Multiple Strap FunctionFor single, double, continuous strapping, or transit mode. Variable Conveyor SpeedFully automatic operation with variable conveyor speed between 15 and 60 meter/minute. Strap End EjectorEject end of strap from the inlet of strap feeding. Easy to clean the end of strap and get the machine ready for next coil of strap. Adjustable Pressure on Press and SquaringEasily adjustable to adapt di�erent bundle requirements.
More Features14
70~1
720 46
5
600
750~
1000
1650
1509
2310
2168
724
1077
5
Bundle Flow
(TP-702CCQ-L)
TP-702C series is a high performance strapping machine designed for the corrugated industry. It o�ers the high strapping productivity with the most cost-e�ective solution.In this category, we have following models:
● High speed corrugated strapper TP-702C ● Corrugated 4-side bundle squaring and strapping system TP-702CQ● Corrugated 3-side bundle squaring and strapping system TP-702CCQ● Bundle Turner for corrugated carton C-BT
STRAPPERSTRAPPERCORRUGATEDCORRUGATED
CorrugatedIndustryCorrugatedIndustry
MERCURY TP-702C
Combined with TP-702CQ for squaring and strapping in the flute direction.
Bundle Turner for Corrugated Carton
C-BT
Designed Specifically for the Corrugated Industry
C-BT Bundle Turner is designed for turning the bundle for downstream strapping operation. It is an ideal machine for connecting in the casemaking line for strapping in the carton flute direction.
All specifications are subject to change without notice.10.2015x2000
15F-1, NO. 17, SEC. 1, CHENGDE ROAD, TAIPEI 103, TAIWANTEL: 886 2 2555 2515FAX: 886 2 2555 2516WEB: www.transpakcorp.comE-mail: [email protected]
Main Features● Suitable for various bundle dimensions.● The table height is adjustable from 700 mm to 1000 mm.● Up and down stream interlock with complete plug connection.● Robust and sturdy frame.
C-BT Technical Data
Conveyor SpeedInfeed: 15 – 65 m/minute
Exit: 18 – 75 m/minute
Table Size C-BT-L 1662 mm(W) x 2400 mm(D)
C-BT-M 1662 mm(W) x 1880 mm(D)
Minimum Bundle Size
300 mm(L) x 200 mm(W) x 20 mm(H)
Bundle Weight max 35 kg
Electrical Requirements220V, 380V, 400V 50/60Hz 3PH
700
~100
0
1422
~172
2
1662
115
1938
2400
471
831 100~710
Bundle Flow
(C-BT-L)