corporate monitor jawaharlal nehru aluminium research...
TRANSCRIPT
Organised by
Corporate Monitor
&
Jawaharlal Nehru Aluminium Research Design & Development Centre
:In Association with:
Indian Primary Copper Producers’ Association
Ministry of Mines, Government of India
Hotel Shangri-La’s Eros, New Delhi July 7-8,2017
2 | P a g e
DAY-1: 7th July 2017
Registrations : 8 45 a.m. onwards
Inaugural Session at 10 a.m.
Opening remarks
Lighting of the lamp & presentation of flower bouquets
Welcome Address: Dr. K Muraleedharan,
Chairman , Organising Committee & Director, CSIR-CGCRI
Address by Dr. Anupam Agnihotri, Director, JNARDDC
Address by Guest of Honour: Shri Atul Bhatt, CMD, MECON
Address by Guest of Honour: Shri Abhijit Pati,CEO-Aluminium,
Vedanta, Jharsuguda
Address by Guest of Honour: Shri Satish Pai, MD, HINDALCO
Address by Guest of Honour, Shri K D Diwan, CMD, Hindustan Copper
Address by Guest of Honour, Dr. T K Chand, CMD, NALCO
Address by Chief Guest : Shri Arun Kumar,IAS,
Secretary, Ministry of Mines followed by his felicitations
Felicitations : Shri K D Diwan – Lifetime Achievement award
Felicitations: Dr. T K Chand – Corporate Governance award
Felicitations : Shri Satish Pai – Corporate Excellence award
Felicitations: Dr B K Satpathy- Scientific Excellence award
Felicitations: Dr. A K Mukhopadhyay- Technological Excellence award
Felicitations : CSIR-NML : Scientific Institutional Excellence award
Presentation of Mementos & Vote of thanks: Dr Vinod K Verma,
Co-Chairman, Conference Organising Committee
Inaugural tea at 11:40 a.m.: sponsored by Himadri Speciality Chemicals
3 | P a g e
Theme Session at 12:10 p.m.
Address by Sri Subhas Chandra, IFS , Jt Secretary, Ministry of Mines,
Government of India
Potential for Aluminium Industry in India : Sri Satish Pai, MD, Hindalco
Industries Ltd
CEO Panel on Primary Copper Production at 1:00 p.m.
Sponsored by Indian Primary Copper Producers’ Association
Chair: Sri Subhas Chandra,IFS, Jt Secretary,MOM
Panelists
K D Diwan- CMD, Hindustan Copper
P Ramnath – CEO- Sterlite Copper
J C Laddha – CEO- Hindalco-Copper Division
Lunch at 1 50 pm
International Paper Session at 2 40 p.m.
Production and performance of slotted anodes : Giovanni Campice,
Tomorrow Technology
Innovations in production processes of high performance alloys: Helgar
Bergmann, Almex USA Inc
Presentation by Outotec
Complete in-line degassing solutions for continuous casting : Francois
Mousseau, STAS Inc
Total Dross Management: Mark Bumford, ALTEK(Europe) Ltd
Evaluation of Efficient Preheating system for CFF Boxes and Launders in
Aluminium cast house : Frank Reausch & Nicklas Kaecker, Drache
4 | P a g e
From Copper raw material down to 2 mm copper wire: Carmelo Maria
Brocato, Continuus Properzi S.p.A
Tea/coffee break
Sponsored Paper Session starts at 5:00 pm
Presentation by Hunan Kori Converters , China
Innovative Rotary Hearth Furnace for Treating Non-Ferrous Metallurgical
Waste to Recover Valuable Metal & By-Products Based on Zero Waste
Discharge Approach:Bikash Sahoo. SHENWU TECHNOLOGY GROUP, China
DMS Silicone Carbide heating elements for melting non-ferrous metals: A
presentation by DMS heating elements, Bangalore
Programme concludes at 6 pm
Delegates will be escorted to Constituent Club at Rafi Marg at 6 30 pm
(Evening Programme sponsored by Hindalco Industries Ltd)
Cultural Programme at 7 pm
Cocktails and Dinner 730 pm onwards
End of Day-1 at 10 pm
5 | P a g e
DAY-2: 8th July 2017
Technical Session-1: 9 45 a.m. Main Hall
Keynote: Industrial Scale Development and Production of Aluminium Alloys for Critical Defence applications : A K Mukhopadhyay , DMRL, Hyderabad
Keynote: Tailings of Jezkazgan Copper Sandstone Deposit- source to replenish the mineral resources of non-ferrous metals: A Baibatsha, Kazakh National Research Technical University, republic of Kazakhstan
Use of High Sulphur Coke at Hindalco Renukoot Carbon Plant: Mukul Modak Detoxification of SPL by destroying leachable cyanide : Manoj T Nimje, JNARDDC,
Nagpur Systematic Approach for the usage of high Vanadium CP Coke for anode production :
Vivek Saxena, Vedanta, Jharsuguda
Morning refreshments at 11 20 a.m.
Technical Session-2 : Main Hall from 11:45 a.m.
Utilisation of waste aluminium dross as refractory material: Upendra Singh,
JNARDDC, Nagpur A Novel method for recovery of Soda from Bauxite residue and utilization of the
residue in more efficient way: Sagar S Pandit, Hindalco Innovation centre-Alumina Usage of low density Alf3 at Hindalco Mahan – cost saving by using an alternate raw
material : K K Pandey, Hindalco, Mahan Development of Aluminium Rod for Higher Productivity RBD: Rashmi Sahoo,
Vedanta, Jharsuguda Macro-modelling of Aluminium Smelting Process : Shanmukh Rajgire, ABSTC, Taloja Development of 3xxx billet for Micro Tube Exchanger Application: Ramya Datrika,
Vedanta, Jharsuguda Instrument for onsite measurement of liquidus and operating temperature of
aluminium electrolysis bath: Dr. A Agnihotri, JNARDDC, Nagpur
Technical Session-3 (Parallel): Hall Tapti from 11:45 a.m.
Impact of Collective Bar Design on Aluminium reduction cell performance : Bhavya Narang, ABSTC, Taloja
6 | P a g e
Designing process flow sheet for Beneficiation of a finely disseminate low grade Copper Ore: Rajendra Kumar Rath, MPD, CSIR—NML, Jamshedpur
A Process for development of refractory aggregates from saprolite: Pravin Bhukte, JNARDDC, Nagpur
Extraction of rare earths from end of the Compact Flurorescent Lamps (CFLs) and Flurorescent Lamps(FLs) : U Rambabu, C-MET, Hyderabad
Inducement of rapid analysis for determination of available alumina and reactive silica in Bauxite: P A Mohammed Najar, JNARDDC, Nagpur
Processing of coal fly ash for the recovery of alumina and other value added products: Kali Sanjay, CSIR-IMMT, Bhubaneswar
Significance of Distillation on Extraction and Purification of strategic metals: Krishna Kumar, ME & R Division, CSIR-NML, Jamshedpur
Lunch at 2 pm
Technical Session-4 (from 2 40 pm)
Failure Analysis of Coreless Induction Furnace Refractory lining, used for Iron
melting in Anode Roding shop of an integrated Aluminium Smelter and their
remedial procedure : S Padhi & R N Nandy, Smelter Plant, NALCO, Angul
Effect of Thiocyanate and acid concentrations on the separation of hafnium and zirconium : Arbind Kumar, C-MET, Hyderabad
Investigation of Structural Integrity of Pond Ash/High Carbon Ferrochrome Slag
based Geopolymer : M K Panigrahi, GIET,Gunupur
Effect of Multi-Pass, zone length and translation rate on impurity segregation during
zone refining of Cadmium: D S Prasad, C-MET, Hyderabad
Recycling of waste printed circuit boards by delamination using different organic
solvents and study of its mechanism : Himanshu Ranjan Verma, IIT(BHU), Varanasi
Valedictory Session at 4 00 pm
Programme concludes with afternoon refreshments at 4 45 pm