copy of control & signal cable, gland, lug requirement (supporting document revised on...

CLIENT : UTKAL ALUMINA INTERNATIONAL LTD., RAYAGADA.

PROJECT : 3 x 30 MW CAPTIVE CO GENERATION POWER PLANT.

DOCUMENT NO : 7015/CH/ELE/CSGEP/001.BDATE & REV : 17.07.12 & R1

Sl. No CABLE - SOURCE CABLE - DESTINATION CABLE TYPE

PANEL / EQUIPMENT EQUIPMENT / PANEL R(CXSq.mm) INS-CON P/C/S

550KW FD FAN VFD PANEL-1 1 550KW FD Fan VFD Panel - 1 550KW FD Fan Motor-1 - LPBS 16CX1.5 PVC-Cu CONTROL 2 550KW FD Fan VFD Panel - 1 550KW FD Fan Motor-1 - LPBS 2PX1.5 PVC-Cu SIGNAL

3 550KW FD Fan VFD Panel - 1 - Temperature Scanner 550KW FD Fan Motor-1 - RTDs (Winding 6) 6TX1.5 PVC-Cu TRIAD

4 550KW FD Fan VFD Panel - 1 - Temperature Scanner 550KW FD Fan Motor-1 - RTDs (Bearing 2) 2TX1.5 PVC-Cu TRIAD550KW FD FAN VFD PANEL - 2

1 550KW FD Fan VFD Panel - 2 550KW FD Fan Motor-2 - LPBS 16CX1.5 PVC-Cu CONTROL 2 550KW FD Fan VFD Panel - 2 550KW FD Fan Motor-2 - LPBS 2PX1.5 PVC-Cu SIGNAL 3 550KW FD Fan VFD Panel - 2 - Temperature Scanner 550KW FD Fan Motor-2 - RTDs (Winding 6) 6TX1.5 PVC-Cu TRIAD4 550KW FD Fan VFD Panel - 2 - Temperature Scanner 550KW FD Fan Motor-2 - RTDs (Bearing 2) 2TX1.5 PVC-Cu TRIAD

550KW ID FAN VFD PANEL-1 1 550KW ID Fan VFD Panel - 1 550KW ID Fan Motor-1 - LPBS 16CX1.5 PVC-Cu CONTROL 2 550KW ID Fan VFD Panel - 1 550KW ID Fan Motor-1 - LPBS 2PX1.5 PVC-Cu SIGNAL 3 550KW ID Fan VFD Panel - 1 - Temperature Scanner 550KW ID Fan Motor-1 - RTDs (Winding 6) 6TX1.5 PVC-Cu TRIAD4 550KW ID Fan VFD Panel - 1 - Temperature Scanner 550KW ID Fan Motor-1 - RTDs (Bearing 2) 2TX1.5 PVC-Cu TRIAD

550KW ID FAN VFD PANEL-25 550KW ID Fan VFD Panel - 2 550KW ID Fan Motor-2 - LPBS 16CX1.5 PVC-Cu CONTROL 6 550KW ID Fan VFD Panel - 2 550KW ID Fan Motor-2 - LPBS 2PX1.5 PVC-Cu SIGNAL 7 550KW ID Fan VFD Panel - 2 - Temperature Scanner 550KW ID Fan Motor-2 - RTDs (Winding 6) 6TX1.5 PVC-Cu TRIAD

550KW ID Fan VFD Panel - 2 - Temperature Scanner 550KW ID Fan Motor-2 - RTDs (Bearing 2) 2TX1.5 PVC-Cu TRIAD

CONSULTANT : FICHTNER CONSULTING ENGINEERS (INDIA) PVT LTD., MUMBAI.

DOCUMENT : CABLE SIZING OF - (GPSPL ELECTRICAL PANELs) - LOCAL CONTROL CABLE LIST

GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD.

SOOT BLOWER PANEL - 1 1 Soot Blower Panel Right/Front Side Wall Blower (A1) 6CX1.5 PVC-Cu CONTROL 2 Soot Blower Panel Right/Front Side Wall Blower (A2) 6CX1.5 PVC-Cu CONTROL 3 Soot Blower Panel Right/Front Side Wall Blower (A3) 6CX1.5 PVC-Cu CONTROL 4 Soot Blower Panel Left/Front Side Wall Blower (A4) 6CX1.5 PVC-Cu CONTROL 5 Soot Blower Panel Left/Front Side Wall Blower (A5) 6CX1.5 PVC-Cu CONTROL 6 Soot Blower Panel Left/Front Side Wall Blower (A6) 6CX1.5 PVC-Cu CONTROL 7 Soot Blower Panel Right/Front Side Wall Blower (B1) 6CX1.5 PVC-Cu CONTROL 8 Soot Blower Panel Right/Front Side Wall Blower (B2) 6CX1.5 PVC-Cu CONTROL 9 Soot Blower Panel Right/Front Side Wall Blower (B3) 6CX1.5 PVC-Cu CONTROL

10 Soot Blower Panel Left/Front Side Wall Blower (B4) 6CX1.5 PVC-Cu CONTROL 11 Soot Blower Panel Left/Front Side Wall Blower (B5) 6CX1.5 PVC-Cu CONTROL 12 Soot Blower Panel Left/Front Side Wall Blower (B6) 6CX1.5 PVC-Cu CONTROL 13 Soot Blower Panel Right/Front Side Wall Blower (C1) 6CX1.5 PVC-Cu CONTROL 14 Soot Blower Panel Right/Front Side Wall Blower (C2) 6CX1.5 PVC-Cu CONTROL 15 Soot Blower Panel Left/Front Side Wall Blower (C3) 6CX1.5 PVC-Cu CONTROL 16 Soot Blower Panel Left/Front Side Wall Blower (C4) 6CX1.5 PVC-Cu CONTROL 17 Soot Blower Panel Left Side Retractable Soot Blower (L1) 8CX1.5 PVC-Cu CONTROL 18 Soot Blower Panel Left Side Retractable Soot Blower (L2) 8CX1.5 PVC-Cu CONTROL 19 Soot Blower Panel Left Side Retractable Soot Blower (L3) 8CX1.5 PVC-Cu CONTROL 20 Soot Blower Panel Left Side Retractable Soot Blower (L4) 8CX1.5 PVC-Cu CONTROL 21 Soot Blower Panel Left Side Retractable Soot Blower (L5) 8CX1.5 PVC-Cu CONTROL 22 Soot Blower Panel Left Side Retractable Soot Blower (L6) 8CX1.5 PVC-Cu CONTROL 23 Soot Blower Panel Right Side Retractable Soot Blower (R1) 8CX1.5 PVC-Cu CONTROL 24 Soot Blower Panel Right Side Retractable Soot Blower (R2) 8CX1.5 PVC-Cu CONTROL 25 Soot Blower Panel Right Side Retractable Soot Blower (R3) 8CX1.5 PVC-Cu CONTROL 26 Soot Blower Panel Right Side Retractable Soot Blower (R4) 8CX1.5 PVC-Cu CONTROL 27 Soot Blower Panel Right Side Retractable Soot Blower (R5) 8CX1.5 PVC-Cu CONTROL 28 Soot Blower Panel Right Side Retractable Soot Blower (R6) 8CX1.5 PVC-Cu CONTROL 29 Soot Blower Panel Rear Side Rotary Soot Blower (GB1) 6CX1.5 PVC-Cu CONTROL 30 Soot Blower Panel Rear Side Rotary Soot Blower (GB2) 6CX1.5 PVC-Cu CONTROL 31 Soot Blower Panel Rear Side Rotary Soot Blower (GB3) 6CX1.5 PVC-Cu CONTROL 32 Soot Blower Panel Rear Side Rotary Soot Blower (GB4) 6CX1.5 PVC-Cu CONTROL 33 Soot Blower Panel Front Side Rotary Soot Blower (GF1) 6CX1.5 PVC-Cu CONTROL 34 Soot Blower Panel Front Side Rotary Soot Blower (GF2) 6CX1.5 PVC-Cu CONTROL 35 Soot Blower Panel Front Side Rotary Soot Blower (GF3) 6CX1.5 PVC-Cu CONTROL 36 Soot Blower Panel Front Side Rotary Soot Blower (GF4) 6CX1.5 PVC-Cu CONTROL

COAL FEEDER PANEL - 11 Coal Feeder Panel - 1 To limit switches in the Gates of Coal Feeder - 1 16CX1.5 PVC-Cu CONTROL

2 Coal Feeder Panel - 1 8CX1.5 PVC-Cu CONTROL COAL FEEDER PANEL - 2

1 Coal Feeder Panel - 2 To limit switches in the Gates of Coal Feeder - 2 16CX1.5 PVC-Cu CONTROL





2 Coal Feeder Panel - 4 8CX1.5 PVC-Cu CONTROL STONE COAL COLLECTION CONTROL CABINET - 1

1 Stone Coal Collection Control Cabinet - 1 I. Entrance Valve - 1 Limit Switches 12CX1.5 PVC-Cu CONTROL 2 Stone Coal Collection Control Cabinet - 1 II. Exit Valve - 1 Limit Switches 12CX1.5 PVC-Cu CONTROL

STONE COAL COLLECTION CONTROL CABINET - 21 Stone Coal Collection Control Cabinet - 2 I. Entrance Valve - 2 Limit Switches 12CX1.5 PVC-Cu CONTROL 2 Stone Coal Collection Control Cabinet - 2 II. Exit Valve - 2 Limit Switches 12CX1.5 PVC-Cu CONTROL



Field Switches @ Coal Feeder-1 Body (Blocking switch, Deviation, Temperature Switch)




LOCAL CONTROL CABINET#1 - 11 Local Control Cabinet#1 - 1 To LSs of LEVEL-AA Valves (@ Corner#1) for Controls. 8CX1.5 PVC-Cu CONTROL 2 Local Control Cabinet#1 - 1 To the Terminal of LEVEL-AA Actuator (@Corner#1) for Controls. 12CX1.5 PVC-Cu CONTROL 3 Local Control Cabinet#1 - 1 To LSs of LEVEL-AB Valves (@ Corner#1) for Controls. 12CX1.5 PVC-Cu CONTROL 4 Local Control Cabinet#1 - 1 To the Terminal of LEVEL-AB Actuator (@Corner#1) for Controls. 12CX1.5 PVC-Cu CONTROL 5 Local Control Cabinet#1 - 1 To LSs of LEVEL-BC Valves (@ Corner#1) for Controls. 12CX1.5 PVC-Cu CONTROL 6 Local Control Cabinet#1 - 1 To the Terminal of LEVEL-BC Actuator (@Corner#1) for Controls. 12CX1.5 PVC-Cu CONTROL



LOCAL CONTROL CABINET#4 - 1Local Control Cabinet#4 - 1 To LSs of LEVEL-AA Valves (@ Corner#4) for Controls. 8CX1.5 PVC-Cu CONTROL Local Control Cabinet#4 - 1 To the Terminal of LEVEL-AA Actuator (@Corner#4) for Controls. 12CX1.5 PVC-Cu CONTROL Local Control Cabinet#4 - 1 To LSs of LEVEL-AB Valves (@ Corner#4) for Controls. 12CX1.5 PVC-Cu CONTROL Local Control Cabinet#4 - 1 To the Terminal of LEVEL-AB Actuator (@Corner#4) for Controls. 12CX1.5 PVC-Cu CONTROL Local Control Cabinet#4 - 1 To LSs of LEVEL-BC Valves (@ Corner#4) for Controls. 12CX1.5 PVC-Cu CONTROL Local Control Cabinet#4 - 1 To the Terminal of LEVEL-BC Actuator (@Corner#4) for Controls. 12CX1.5 PVC-Cu CONTROL



DOCUMENT NO : 7015/CH/ELE/CSGEP/001.CDATE & REV : 17.07.12 & R1


PANEL / EQUIPMENT EQUIPMENT / PANEL R(CXSq.mm) INS-CON P/C/S550KW FD FAN VFD PANEL-1

1 DCS Panel 550KW FD Fan VFD Panel - 1 8CX1.5 PVC-Cu CONTROL 550KW FD FAN VFD PANEL - 2

1 DCS Panel 550KW FD Fan VFD Panel - 2 8CX1.5 PVC-Cu CONTROL 550KW ID FAN VFD PANEL-1

1 DCS Panel 550KW ID Fan VFD Panel - 1 8CX1.5 PVC-Cu CONTROL 550KW ID FAN VFD PANEL-2

1 DCS Panel 550KW ID Fan VFD Panel - 2 8CX1.5 PVC-Cu CONTROL SOOT BLOWER PANEL

1 PLC Panel Soot Blower Panel fot the following Digital Outputs-1. 16CX1.5 PVC-Cu CONTROL 2 PLC Panel Soot Blower Panel fot the following Digital Outputs-2. 16CX1.5 PVC-Cu CONTROL 3 PLC Panel Soot Blower Panel fot the following Digital Outputs-3. 16CX1.5 PVC-Cu CONTROL 4 DCS Panel PLC Panel for the following Digital Outputs-4. 10CX1.5 PVC-Cu CONTROL

COAL FEEDER PANEL - 11 DCS Panel Coal Feeder Panel - 1 for Digital Outputs 14CX1.5 PVC-Cu CONTROL




COAL MILL MOTOR - LUBE STATION CONTROL CABINET - 1 1 DCS Panel Coal Mill Motor - Lube Station Control Cabinet - 1 for Digital Outputs 12CX1.5 PVC-Cu CONTROL

COAL MILL MOTOR - LUBE STATION CONTROL CABINET - 21 DCS Panel Coal Mill Motor - Lube Station Control Cabinet - 2 for Digital Outputs 12CX1.5 PVC-Cu CONTROL



LOCAL CONTROL CABINET#1 - 11 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for Digital Outputs-1. 12CX1.5 PVC-Cu CONTROL 2 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for Digital Outputs-2. 10CX1.5 PVC-Cu CONTROL 3 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for Digital Outputs-3. 12CX1.5 PVC-Cu CONTROL 4 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for Digital Outputs-4. 10CX1.5 PVC-Cu CONTROL 5 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for Digital Outputs-5. 12CX1.5 PVC-Cu CONTROL 6 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for Digital Outputs-6. 10CX1.5 PVC-Cu CONTROL


LOCAL CONTROL CABINET#3 - 11 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for Digital Outputs-1. 12CX1.5 PVC-Cu CONTROL 2 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for Digital Outputs-2. 10CX1.5 PVC-Cu CONTROL


DOCUMENT : CABLE SIZING OF - (GPSPL ELECTRICAL PANELs) - REM0TE CONTROL CABLE LIST (DIGITAL OUTPUT)

RATING (KW)

VOLTAGE (V)

FULL LOAD CURRENT

CABLE CURRENT FOR 1R

DERATED CURRENT

(A)

GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD.

3 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for Digital Outputs-3 12CX1.5 PVC-Cu CONTROL 4 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for Digital Outputs-4 10CX1.5 PVC-Cu CONTROL 5 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for Digital Outputs-5 12CX1.5 PVC-Cu CONTROL 6 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for Digital Outputs-6 10CX1.5 PVC-Cu CONTROL


LOCAL CONTROL CABINET - 2 (or) LOGIC CONTROL CABINET1 DCS Panel Local Control Cabinet - 2 (Logic Control Cabinet) for Digital Outputs-1 16CX1.5 PVC-Cu CONTROL 2 DCS Panel Local Control Cabinet - 2 (Logic Control Cabinet) for Digital Outputs-2 16CX1.5 PVC-Cu CONTROL 3 DCS Panel Local Control Cabinet - 2 (Logic Control Cabinet) for Digital Outputs-3 12CX1.5 PVC-Cu CONTROL 4 DCS Panel Local Control Cabinet - 2 (Logic Control Cabinet) for Digital Outputs-4 12CX1.5 PVC-Cu CONTROL 5 DCS Panel Local Control Cabinet - 2 (Logic Control Cabinet) for Digital Outputs-5 6CX1.5 PVC-Cu CONTROL



DOCUMENT NO : 7015/CH/ELE/CSGEP/001.DDATE & REV : 17.07.12 & R1



1 550KW FD Fan VFD Panel - 1 DCS Panel (for 3 No of Analog Inputs & 1 No of Analog Output) 4PX1.5 PVC-Cu SIGNAL 550KW FD FAN VFD PANEL - 2

1 550KW FD Fan VFD Panel - 2 DCS Panel (for 3 No of Analog Inputs & 1 No of Analog Output) 4PX1.5 PVC-Cu SIGNAL 550KW ID FAN VFD PANEL-1

1 550KW ID Fan VFD Panel - 1 DCS Panel (for 3 No of Analog Inputs & 1 No of Analog Output) 4PX1.5 PVC-Cu SIGNAL 550KW ID FAN VFD PANEL-2

1 550KW ID Fan VFD Panel - 2 DCS Panel (for 3 No of Analog Inputs & 1 No of Analog Output) 4PX1.5 PVC-Cu SIGNAL SOOT BLOWER PANEL

1 Soot Blower Panel PLC Panel for Analog Inputs-1. 2PX1.5 PVC-Cu SIGNAL 2 PLC Panel Equipment in the Field for Analog Inputs-2 and Analog Output (PT & Control Valve) 4PX1.5 PVC-Cu SIGNAL

COAL FEEDER PANEL - 11 Coal Feeder Panel - 1 (VFD) DCS Panel for Analog Input & Analog Output. 3PX1.5 PVC-Cu SIGNAL 2 Coal Feeder Panel - 1 Coal Feeder - 1 Body (Speed Switches & Load Cell) 4PX1.5 PVC-Cu SIGNAL




FLAME SCANNER CONTROL CABINET - 1 1 Flame Sensors at Layer - AA (Corner#1) Flame Scanner Control Cabinet - 1 - (Flame Detectors - XHT11) 1PX1.5 PVC-Cu SIGNAL 2 Flame Sensors at Layer - AB (Corner#1) Flame Scanner Control Cabinet - 1 - (Flame Detectors - XHT21) 1PX1.5 PVC-Cu SIGNAL 3 Flame Sensors at Layer - BC (Corner#1) Flame Scanner Control Cabinet - 1 - (Flame Detectors - XHT31) 1PX1.5 PVC-Cu SIGNAL 4 Flame Sensors at Layer - A (Corner#1) Flame Scanner Control Cabinet - 1 - (Flame Detector - XHT41) 1PX1.5 PVC-Cu SIGNAL 5 Flame Sensors at Layer - B (Corner#1) Flame Scanner Control Cabinet - 1 - (Flame Detector - XHT51) 1PX1.5 PVC-Cu SIGNAL 6 Flame Sensors at Layer - C (Corner#1) Flame Scanner Control Cabinet - 1 - (Flame Detector - XHT61) 1PX1.5 PVC-Cu SIGNAL 7 Flame Sensors at Layer - D (Corner#1) Flame Scanner Control Cabinet - 1 - (Flame Detector - XHT71) 1PX1.5 PVC-Cu SIGNAL 8 Flame Scanner Control Cabinet - 1 DCS Panel for Analog Inputs. 8PX1.5 PVC-Cu SIGNAL

FLAME SCANNER CONTROL CABINET - 21 Flame Sensors at Layer - AA (Corner#2) Flame Scanner Control Cabinet - 2 - (Flame Detectors - XHT11) 1PX1.5 PVC-Cu SIGNAL 2 Flame Sensors at Layer - AB (Corner#2) Flame Scanner Control Cabinet - 2 - (Flame Detectors - XHT21) 1PX1.5 PVC-Cu SIGNAL 3 Flame Sensors at Layer - BC (Corner#2) Flame Scanner Control Cabinet - 2 - (Flame Detectors - XHT31) 1PX1.5 PVC-Cu SIGNAL 4 Flame Sensors at Layer - A (Corner#2) Flame Scanner Control Cabinet - 2 - (Flame Detector - XHT41) 1PX1.5 PVC-Cu SIGNAL 5 Flame Sensors at Layer - B (Corner#2) Flame Scanner Control Cabinet - 2 - (Flame Detector - XHT51) 1PX1.5 PVC-Cu SIGNAL 6 Flame Sensors at Layer - C (Corner#2) Flame Scanner Control Cabinet - 2 - (Flame Detector - XHT61) 1PX1.5 PVC-Cu SIGNAL 7 Flame Sensors at Layer - D (Corner#2) Flame Scanner Control Cabinet - 2 - (Flame Detector - XHT71) 1PX1.5 PVC-Cu SIGNAL 8 Flame Scanner Control Cabinet - 2 DCS Panel for Analog Inputs. 8PX1.5 PVC-Cu SIGNAL




DOCUMENT : CABLE SIZING OF - (GPSPL ELECTRICAL PANELs) - REM0TE CONTROL CABLE LIST (ANALALOG IINPUT & ANALOG OUTPUT)

RATING (KW)

VOLTAGE (V)

FULL LOAD CURRENT


DERATED CURRENT

(A)

GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD.



DOCUMENT NO : 7015/CH/ELE/CSGEP/001.EDATE & REV : 17.07.12 & R1



1 550KW FD Fan VFD Panel - 1 DCS Panel 8CX1.5 PVC-Cu CONTROL 550KW FD FAN VFD PANEL - 2

1 550KW FD Fan VFD Panel - 2 DCS Panel 8CX1.5 PVC-Cu CONTROL 550KW ID FAN VFD PANEL-1

1 550KW ID Fan VFD Panel - 1 DCS Panel 8CX1.5 PVC-Cu CONTROL 550KW ID FAN VFD PANEL-2

1 550KW ID Fan VFD Panel - 2 DCS Panel 8CX1.5 PVC-Cu CONTROL SOOT BLOWER PANEL TO PLC PANEL

1 Soot Blower Panel PLC Panel For Digtial Input-1 16CX1.5 PVC-Cu CONTROL 2 Soot Blower Panel PLC Panel For Digtial Input-2 16CX1.5 PVC-Cu CONTROL 3 Soot Blower Panel PLC Panel For Digtial Input-3 16CX1.5 PVC-Cu CONTROL 4 Soot Blower Panel PLC Panel For Digtial Input-4 16CX1.5 PVC-Cu CONTROL 5 Soot Blower Panel PLC Panel For Digtial Input-5 14CX1.5 PVC-Cu CONTROL 6 PLC Panel (MV01) Motor Cut-Off Valve - 1 for Digital Inputs & Outputs. 10CX1.5 PVC-Cu CONTROL 7 PLC Panel (MV02) Motor Cut-Off Valve - 2 for Digital Inputs & Outputs. 10CX1.5 PVC-Cu CONTROL 8 PLC Panel (MV03) Motor Cut-Off Valve - 3 Digital Inputs & Outputs. 10CX1.5 PVC-Cu CONTROL 9 PLC Panel (MV04) Motor Cut-Off Valve - 4 Digital Inputs & Outputs. 10CX1.5 PVC-Cu CONTROL 10 PLC Panel DCS Panel For Digital Input-6 10CX1.5 PVC-Cu CONTROL

COAL FEEDER PANEL - 11 Coal Feeder Panel - 1 DCS Panel for Digital Inputs-1 14CX1.5 PVC-Cu CONTROL 2 Coal Feeder Panel - 1 DCS Panel for Digital Inputs-2 14CX1.5 PVC-Cu CONTROL




COAL MILL MOTOR - LUBE STATION CONTROL CABINET - 1 1 Coal Mill Motor - Lube Station Control Cabinet - 1 DCS Panel for the following Digital Inputs-1. 10CX1.5 PVC-Cu CONTROL 2 Coal Mill Motor - Lube Station Control Cabinet - 1 DCS Panel for the following Digital Inputs-2. 10CX1.5 PVC-Cu CONTROL

COAL MILL MOTOR - LUBE STATION CONTROL CABINET - 21 Coal Mill Motor - Lube Station Control Cabinet - 2 DCS Panel for the following Digital Inputs-1. 10CX1.5 PVC-Cu CONTROL 2 Coal Mill Motor - Lube Station Control Cabinet - 2 DCS Panel for the following Digital Inputs-2. 10CX1.5 PVC-Cu CONTROL



STONE COAL COLLECTION CONTROL CABINET - 16 Stone Coal Collection Control Cabinet - 1 DCS Panel for Digital Inputs 12CX1.5 PVC-Cu CONTROL

STONE COAL COLLECTION CONTROL CABINET - 2


DOCUMENT : CABLE SIZING OF - (GPSPL ELECTRICAL PANELs) - REM0TE CONTROL CABLE LIST (DIGITAL INPUT)

RATING (KW)

VOLTAGE (V)

FULL LOAD CURRENT


DERATED CURRENT

(A)

GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD.

6 Stone Coal Collection Control Cabinet - 2 DCS Panel for Digital Inputs 12CX1.5 PVC-Cu CONTROL STONE COAL COLLECTION CONTROL CABINET - 3

6 Stone Coal Collection Control Cabinet - 3 DCS Panel for Digital Inputs 12CX1.5 PVC-Cu CONTROL STONE COAL COLLECTION CONTROL CABINET - 4

6 Stone Coal Collection Control Cabinet - 4 DCS Panel for Digital Inputs. 12CX1.5 PVC-Cu CONTROL FLAME SCANNER CONTROL CABINET - 1

1 Flame Scanner Control Cabinet - 1 LOCAL CONTROL CABINET - 2 (PLC PANEL) for Digital Inputs-1. 16CX1.5 PVC-Cu CONTROL 2 Flame Scanner Control Cabinet - 1 DCS Panel for the following Digital Inputs-2. 8CX1.5 PVC-Cu CONTROL 3 Flame Scanner Control Cabinet - 1 DCS Panel for the following Digital Inputs-3. 10CX1.5 PVC-Cu CONTROL

FLAME SCANNER CONTROL CABINET - 21 Flame Scanner Control Cabinet - 2 LOCAL CONTROL CABINET - 2 (PLC PANEL) for Digital Inputs-1. 16CX1.5 PVC-Cu CONTROL 2 Flame Scanner Control Cabinet - 2 DCS Panel for Digital Inputs-2. 16CX1.5 PVC-Cu CONTROL

FLAME SCANNER CONTROL CABINET - 31 Flame Scanner Control Cabinet - 3 LOCAL CONTROL CABINET - 3 (PLC PANEL) for Digital Inputs-1 16CX1.5 PVC-Cu CONTROL 2 Flame Scanner Control Cabinet - 3 DCS Panel for Digital Inputs-2. 16CX1.5 PVC-Cu CONTROL

FLAME SCANNER CONTROL CABINET - 41 Flame Scanner Control Cabinet - 4 LOCAL CONTROL CABINET - 4 (PLC PANEL) for Digital Inputs-1. 16CX1.5 PVC-Cu CONTROL 2 Flame Scanner Control Cabinet - 4 DCS Panel for the following Digital Inputs-2. 16CX1.5 PVC-Cu CONTROL

LOCAL CONTROL CABINET#1 - 11 Local Control Cabinet#1 - 1 TO Local Control Cabinet-2 (PLC PANEL) for Digital Inputs-1. 12CX1.5 PVC-Cu CONTROL 2 Local Control Cabinet#1 - 1 TO Local Control Cabinet-2 (PLC PANEL) for Digital Inputs-2. 12CX1.5 PVC-Cu CONTROL 3 Local Control Cabinet#1 - 1 TO Local Control Cabinet-2 (PLC PANEL) for Digital Inputs-3. 12CX1.5 PVC-Cu CONTROL

LOCAL CONTROL CABINET#2 - 11 Local Control Cabinet#2 - 1 To Local Control Cabinet-2 (PLC PANEL) for Digital Inputs-1. 12CX1.5 PVC-Cu CONTROL 2 Local Control Cabinet#2 - 1 To Local Control Cabinet-2 (PLC PANEL) for Digital Inputs-2. 12CX1.5 PVC-Cu CONTROL 3 Local Control Cabinet#2 - 1 To Local Control Cabinet-2 (PLC PANEL) for Digital Inputs-3. 12CX1.5 PVC-Cu CONTROL



LOCAL CONTROL CABINET - 2 (or) LOGIC CONTROL CABINETREMOTE CONTROL CABLE (DIGITAL INPUT TO PLC)

1 Local Control Cabinet - 2 (Logic Control Cabinet) To Field Valves (LDO& HFO I/L Shut Off) for Digital Inputs-1 8CX1.5 PVC-Cu CONTROL 2 Local Control Cabinet - 2 (Logic Control Cabinet) To Field Valves (LDO & HFO Return to I/L) for Digital Inputs-2 8CX1.5 PVC-Cu CONTROL 3 Local Control Cabinet - 2 (Logic Control Cabinet) DCS Panel for (Scanner Air Fans) Digital Inputs-3. 14CX1.5 PVC-Cu CONTROL 4 Local Control Cabinet - 2 (Logic Control Cabinet) For Digital Inputs-4 14CX1.5 PVC-Cu CONTROL

CLIENT UTKAL ALUMINA INTERNATIONAL LTD., RAYAGADA. CONSULTANT FICHTNER CONSULTING ENGINEERS (INDIA) PVT LTD., MUMBAI. PROJECT 3 x 30 MW CAPTIVE CO GENERATION POWER PLANT. DOCUMENT CABLE SIZING OF - (GPSPL PANELs) ELECTRICAL PANELs - (Consolidated for Power, Local and Remote Control Cable) DOCUMENT NO 7015/CH/ELE/CSGEP/001. DATE & REV 17.07.12 & REV-1

Sl. No CABLE - SOURCE CABLE - DESTINATION CABLE TYPE LENGTH (Mtr)

PANEL / EQUIPMENT EQUIPMENT / PANEL R(CXSq.mm) INS-CON P/C/S UNIT-1 UNIT-2 UNIT-3 TOTAL 550KW FD FAN VFD PANEL-1

POWER CABLES 1 6.6/0.72/0.72KV Converter Duty Transformer - 1 550KW FD Fan VFD Panel - 1 - 400A Breaker#1

550 690 575.3455 300.3 3Cx300 XLPE - Al POWER

2 6.6/0.72/0.72KV Converter Duty Transformer - 1 550KW FD Fan VFD Panel - 1 - 400A Breaker#2 455 300.3 3Cx300 XLPE - Al POWER3 550KW FD Fan VFD Panel - 1 550KW FD Fan Motor - 1 550 690 575.3 455 300.3 2R(3Cx300) XLPE - Al POWER4 550KW FD Fan VFD Panel - 1 550KW FD Fan Motor-1 - Auxillary Cooling Fan Motor 3 690 3.1 30 19.8 3CX2.5 XLPE - Cu POWER5 550KW FD Fan VFD Panel - 1 550KW FD Fan Motor-1 - Space Heater 150W 240 0.7 32 21.12 2CX2.5 XLPE - Cu POWER

LOCAL CONTROL CABLES 6 550KW FD Fan VFD Panel - 1 550KW FD Fan Motor-1 - LPBS for the following Local Controls 16CX1.5 PVC-Cu CONTROL

1. VFD Local START 2. VFD Local STOP 3. LCS - Speed Increase 4. LCS - Speed Decrease 5. LCS - VFD ON Indication 6. LCS - VFD OFF Indication 7. LCS - VFD TRIP Indication

SIGNAL CABLE7 550KW FD Fan VFD Panel - 1 550KW FD Fan Motor-1 - LPBS 2PX1.5 PVC-Cu SIGNAL

1. Analog Ammeter 2. Analog RPM Meter

TRIAD CABLE 8 550KW FD Fan VFD Panel - 1 - Temperature Scanner 550KW FD Fan Motor-1 - RTDs (Winding 6) 6TX1.5 PVC-Cu TRIAD9 550KW FD Fan VFD Panel - 1 - Temperature Scanner 550KW FD Fan Motor-1 - RTDs (Bearing 2) 2TX1.5 PVC-Cu TRIAD

REMOTE CONTROL CABLES (DIGITAL INPUT AND DIGITAL OUTPUT)10 550KW FD Fan VFD Panel - 1 REMOTE CONTROL CABLES (DIGITAL INPUT) 8CX1.5 PVC-Cu CONTROL

DCS Panel for the following Digital Inputs 1. VFD RUN2. VFD TRIP 3. WIINDING TEMPERATURE ALARM4. BEARING TEMPERATURE ALARM

REMOTE CONTROL CABLES (DIGITAL OUTPUT)11 DCS Panel 550KW FD Fan VFD Panel - 1 for the following Digital Outputs 8CX1.5 PVC-Cu CONTROL

1. VFD START 2. VFD STOP 3. LOCAL PERMISSIVE

REMOTE CONTROL CABLES (ANALOG INPUT & ANALOG OUTPUT)12 550KW FD Fan VFD Panel - 1 REMOTE CONTROL CABLES (ANALOG INPUT) 4PX1.5 PVC-Cu SIGNAL

DCS Panel for the following Analog Inputs. 1. (4-20mA) Speed Feedback 2. (4-20mA) Motor Current Feedback 3. (4-20mA) Motor KW Feedback

REMOTE CONTROL CABLES (ANALOG OUTPUT)DCS Panel 550KW FD Fan VFD Panel - 1 for the following Analog Output

1. (4-20mA) Speed Reference550KW FD FAN VFD PANEL - 2

POWER CABLES 1 6.6/0.72/0.72KV Converter Duty Transformer - 2 550KW FD Fan VFD Panel - 2 - 400A Breker#1

550 690 575.3455 300.3 3Cx300 XLPE - Al POWER

2 6.6/0.72/0.72KV Converter Duty Transformer - 2 550KW FD Fan VFD Panel - 2 - 400A Breker#1 455 300.3 3Cx300 XLPE - Al POWER3 550KW FD Fan VFD Panel - 2 550KW FD Fan Motor - 2 550 690 575.3 455 300.3 2R(3Cx300) XLPE - Al POWER4 550KW FD Fan VFD Panel - 2 550KW FD Fan Motor-2 - Auxillary Cooling Fan Motor 3 690 3.1 30 19.8 3CX2.5 XLPE - Cu POWER5 550KW FD Fan VFD Panel - 2 550KW FD Fan Motor-2 - Space Heater 150W 240 0.7 32 21.12 2CX2.5 XLPE - Cu POWER

LOCAL CONTROL CABLES 6 550KW FD Fan VFD Panel - 2 550KW FD Fan Motor-2 - LPBS for the following Local Controls 16CX1.5 PVC-Cu CONTROL


RATING (KW)

VOLTAGE (V)

FULL LOAD CURRENT

(A)

CABLE CURRENT FOR 1R (A)

DERATED CURRENT

(A)DF = 0.66

GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD. GREENESOL POWER SYSTEMS PVT. LTD.

SIGNAL CABLE7 550KW FD Fan VFD Panel - 2 550KW FD Fan Motor-2 - LPBS 2PX1.5 PVC-Cu SIGNAL


TRIAD CABLE8 550KW FD Fan VFD Panel - 2 - Temperature Scanner 550KW FD Fan Motor-2 - RTDs (Winding 6) 6TX1.5 PVC-Cu TRIAD9 550KW FD Fan VFD Panel - 2 - Temperature Scanner 550KW FD Fan Motor-2 - RTDs (Bearing 2) 2TX1.5 PVC-Cu TRIAD

REMOTE CONTROL CABLES (DIGITAL INPUT AND DIGITAL OUTPUT)10 550KW FD Fan VFD Panel - 2 REMOTE CONTROL CABLES (DIGITAL INPUT) 8CX1.5 PVC-Cu CONTROL


REMOTE CONTROL CABLES (DIGITAL OUTPUT)11 DCS Panel 550KW FD Fan VFD Panel - 2 for the following Digital Outputs 8CX1.5 PVC-Cu CONTROL


REMOTE CONTROL CABLES (ANALOG INPUT & ANALOG OUTPUT)12 550KW FD Fan VFD Panel - 2 REMOTE CONTROL CABLES (ANALOG INPUT) 4PX1.5 PVC-Cu SIGNAL


REMOTE CONTROL CABLES (ANALOG OUTPUT)DCS Panel 550KW FD Fan VFD Panel - 2 for Analog Output

1. (4-20mA) Speed Reference550KW ID FAN VFD PANEL-1

POWER CABLES 1 6.6/0.72/0.72KV Converter Duty Transformer - 1 550KW ID Fan VFD Panel - 1 - 400A Breker#1

550 690 575.3455 300.3 3Cx300 XLPE - Al POWER

2 6.6/0.72/0.72KV Converter Duty Transformer - 1 550KW ID Fan VFD Panel - 1 - 400A Breker#1 455 300.3 3Cx300 XLPE - Al POWER3 550KW ID Fan VFD Panel - 1 550KW ID Fan Motor - 1 550 690 575.3 455 300.3 2R(3Cx300) XLPE - Al POWER4 550KW ID Fan VFD Panel - 1 550KW ID Fan Motor-1 - Auxillary Cooling Fan Motor 3 690 3.1 30 19.8 3CX2.5 XLPE - Cu POWER5 550KW ID Fan VFD Panel - 1 550KW ID Fan Motor-1 - Space Heater 150W 240 0.7 32 21.12 2CX2.5 XLPE - Cu POWER

LOCAL CONTROL CABLES 6 550KW ID Fan VFD Panel - 1 550KW ID Fan Motor-1 - LPBS for the following Local Controls 16CX1.5 PVC-Cu CONTROL


SIGNAL CABLE7 550KW ID Fan VFD Panel - 1 550KW ID Fan Motor-1 - LPBS 2PX1.5 PVC-Cu SIGNAL


TRIAD CABLE 8 550KW ID Fan VFD Panel - 1 - Temperature Scanner 550KW ID Fan Motor-1 - RTDs (Winding 6) 6TX1.5 PVC-Cu TRIAD9 550KW ID Fan VFD Panel - 1 - Temperature Scanner 550KW ID Fan Motor-1 - RTDs (Bearing 2) 2TX1.5 PVC-Cu TRIAD

REMOTE CONTROL CABLES (DIGITAL INPUT)10 550KW ID Fan VFD Panel - 1 REMOTE CONTROL CABLES (DIGITAL INPUT) 8CX1.5 PVC-Cu CONTROL


REMOTE CONTROL CABLES (DIGITAL OUTPUT)11 DCS Panel 550KW ID Fan VFD Panel - 1 for the following Digital Outputs 8CX1.5 PVC-Cu CONTROL


REMOTE CONTROL CABLES (ANALOG INPUT & ANALOG OUTPUT)12 550KW ID Fan VFD Panel - 1 REMOTE CONTROL CABLES (ANALOG INPUT) 4PX1.5 PVC-Cu SIGNAL


REMOTE CONTROL CABLES (ANALOG OUTPUT)DCS Panel 550KW ID Fan VFD Panel - 1 for Analog Output

1. (4-20mA) Speed Reference

550KW ID FAN VFD PANEL-2POWER CABLES

1 6.6/0.72/0.72KV Converter Duty Transformer - 2 550KW ID Fan VFD Panel - 2 - 400A Breker#1550 690 575.3

455 300.3 3Cx300 XLPE - Al POWER2 6.6/0.72/0.72KV Converter Duty Transformer - 2 550KW ID Fan VFD Panel - 2 - 400A Breker#1 455 300.3 3Cx300 XLPE - Al POWER3 550KW ID Fan VFD Panel - 2 550KW ID Fan Motor - 2 550 690 575.3 455 300.3 2R(3Cx300) XLPE - Al POWER4 550KW ID Fan VFD Panel - 2 550KW ID Fan Motor-2 - Auxillary Cooling Fan Motor 3 690 3.1 30 19.8 3CX2.5 XLPE - Cu POWER5 550KW ID Fan VFD Panel - 2 550KW ID Fan Motor-2 - Space Heater 150W 240 0.7 32 21.12 2CX2.5 XLPE - Cu POWER

LOCAL CONTROL CABLES 6 550KW ID Fan VFD Panel - 2 550KW ID Fan Motor-2 - LPBS for the following Local Controls 16CX1.5 PVC-Cu CONTROL


SIGNAL CABLE7 550KW ID Fan VFD Panel - 2 550KW ID Fan Motor-2 - LPBS 2PX1.5 PVC-Cu SIGNAL


TRIAD CABLE8 550KW ID Fan VFD Panel - 2 - Temperature Scanner 550KW ID Fan Motor-2 - RTDs (Winding 6) 6TX1.5 PVC-Cu TRIAD9 550KW ID Fan VFD Panel - 2 - Temperature Scanner 550KW ID Fan Motor-2 - RTDs (Bearing 2) 2TX1.5 PVC-Cu TRIAD

REMOTE CONTROL CABLES (DIGITAL INPUT)10 550KW ID Fan VFD Panel - 2 REMOTE CONTROL CABLES (DIGITAL INPUT) 8CX1.5 PVC-Cu CONTROL


REMOTE CONTROL CABLES (DIGITAL OUTPUT)11 DCS Panel 550KW ID Fan VFD Panel - 2 for the following Digital Outputs 8CX1.5 PVC-Cu CONTROL


REMOTE CONTROL CABLES (ANALOG INPUT AND ANALOG OUTPUT)12 550KW ID Fan VFD Panel - 2 REMOTE CONTROL CABLES (ANALOG INPUT) 4PX1.5 PVC-Cu SIGNAL


REMOTE CONTROL CABLES (ANALOG OUTPUT)DCS Panel 550KW ID Fan VFD Panel - 2 for the following Analog Output

1. (4-20mA) Speed ReferenceSOOT BLOWER PANEL - 1

SOOT BLOWER PANEL - INCOMER POWER CABLE 1 PMCC - Customer Panel Soot Blower Panel (Incomer Rating) 20A 415 20A 47 31.02 4CX6 XLPE-Cu POWER2 Soot Blower Panel PLC Panel 10A 240 10A 30 19.8 3CX2.5 XLPE-Cu POWER

MOTORISED VALVE - POWER CABLE 3 Soot Blower Panel Soot Blower - Motorised Valve (MV01) 0.12 415 0.2 30 19.8 3CX2.5 XLPE-Cu POWER4 Soot Blower Panel Soot Blower - Motorised Valve (MV02) 0.12 415 0.2 30 19.8 3CX2.5 XLPE-Cu POWER5 Soot Blower Panel Soot Blower - Motorised Valve (MV03) 0.12 415 0.2 30 19.8 3CX2.5 XLPE-Cu POWER6 Soot Blower Panel Soot Blower - Motorised Valve (MV04) 0.12 415 0.2 30 19.8 3CX2.5 XLPE-Cu POWER

RIGHT/FRONT SIDE WALL BLOWER (A1) - POWER CABLE 7 Soot Blower Panel Right/Front Side Wall Blower (A1) 0.25 415 0.4 30 19.8 3CX2.5 XLPE-Cu POWER

RIGHT/FRONT SIDE WALL BLOWER (A1) - CONTROL CABLE 8 Soot Blower Panel Right/Front Side Wall Blower (A1) for the following Controls 6CX1.5 PVC-Cu CONTROL

1. Reverse Limit Switch 2. Stop Limit Switch 3. Stop Push Button






1. Reverse Limit Switch

2. Stop Limit Switch 3. Stop Push Button

LEFT/FRONT SIDE WALL BLOWER (A4) - POWER CABLE 13 Soot Blower Panel Left/Front Side Wall Blower (A4) 0.25 415 0.4 30 19.8 3CX2.5 XLPE-Cu POWER

LEFT/FRONT SIDE WALL BLOWER (A4) - CONTROL CABLE 14 Soot Blower Panel Left/Front Side Wall Blower (A4) for the following Controls 6CX1.5 PVC-Cu CONTROL








RIGHT/FRONT SIDE WALL BLOWER (B1) - POWER CABLE 19 Soot Blower Panel Right/Front Side Wall Blower (B1) 0.25 415 0.4 30 19.8 3CX2.5 XLPE-Cu POWER

RIGHT/FRONT SIDE WALL BLOWER (B1) - CONTROL CABLE 20 Soot Blower Panel Right/Front Side Wall Blower (B1) for the following Controls 6CX1.5 PVC-Cu CONTROL








LEFT/FRONT SIDE WALL BLOWER (B4) - POWER CABLE 25 Soot Blower Panel Left/Front Side Wall Blower (B4) 0.25 415 0.4 30 19.8 3CX2.5 XLPE-Cu POWER

LEFT/FRONT SIDE WALL BLOWER (B4) - CONTROL CABLE 26 Soot Blower Panel Left/Front Side Wall Blower (B4) for the following Controls 6CX1.5 PVC-Cu CONTROL








RIGHT/FRONT SIDE WALL BLOWER (C1) - POWER CABLE 31 Soot Blower Panel Right/Front Side Wall Blower (C1) 0.25 415 0.4 30 19.8 3CX2.5 XLPE-Cu POWER

RIGHT/FRONT SIDE WALL BLOWER (C1) - CONTROL CABLE 32 Soot Blower Panel Right/Front Side Wall Blower (C1) for the following Controls 6CX1.5 PVC-Cu CONTROL


RIGHT/FRONT SIDE WALL BLOWER (C2) - POWER CABLE 33 Soot Blower Panel Right/Front Side Wall Blower (C2) 0.25 415 0.4 30 19.8 3CX2.5 XLPE-Cu POWER

RIGHT/FRONT SIDE WALL BLOWER (C2) - CONTROL CABLE 34 Soot Blower Panel Right/Front Side Wall Blower (C2) for the following Controls 6CX1.5 PVC-Cu CONTROL


LEFT/FRONT SIDE WALL BLOWER (C3) - POWER CABLE 35 Soot Blower Panel Left/Front Side Wall Blower (C3) 0.25 415 0.4 30 19.8 3CX2.5 XLPE-Cu POWER

LEFT/FRONT SIDE WALL BLOWER (C3) - CONTROL CABLE 36 Soot Blower Panel Left/Front Side Wall Blower (C3) for the following Controls 6CX1.5 PVC-Cu CONTROL


LEFT/FRONT SIDE WALL BLOWER (C4) - POWER CABLE 37 Soot Blower Panel Left/Front Side Wall Blower (C4) 0.25 415 0.4 30 19.8 3CX2.5 XLPE-Cu POWER

LEFT/FRONT SIDE WALL BLOWER (C4) - CONTROL CABLE 38 Soot Blower Panel Left/Front Side Wall Blower (C4) for the following Controls 6CX1.5 PVC-Cu CONTROL


LEFT SIDE RETRACTABLE SOOT BLOWER (L1) - POWER CABLE 39 Soot Blower Panel Left Side Retractable Soot Blower (L1) 0.55 415 1.0 30 19.8 3CX2.5 XLPE-Cu POWER

LEFT SIDE RETRACTABLE SOOT BLOWER (L1) - CONTROL CABLE 40 Soot Blower Panel Left Side Retractable Soot Blower (L1) for the following Controls 8CX1.5 PVC-Cu CONTROL

















RIGHT SIDE RETRACTABLE SOOT BLOWER (R1) - POWER CABLE 51 Soot Blower Panel Right Side Retractable Soot Blower (R1) 0.55 415 1.0 30 19.8 3CX2.5 XLPE-Cu POWER

RIGHT SIDE RETRACTABLE SOOT BLOWER (R1) - CONTROL CABLE 52 Soot Blower Panel Right Side Retractable Soot Blower (R1) for the following Controls 8CX1.5 PVC-Cu CONTROL

















REAR SIDE ROTARY SOOT BLOWER (GB1) - POWER CABLE 63 Soot Blower Panel Rear Side Rotary Soot Blower (GB1) 0.37 415 0.6 30 19.8 3CX2.5 XLPE-Cu POWER

REAR SIDE ROTARY SOOT BLOWER (GB1) - CONTROL CABLE 64 Soot Blower Panel Rear Side Rotary Soot Blower (GB1) 6CX1.5 PVC-Cu CONTROL











FRONT SIDE ROTARY SOOT BLOWER (GF1) - POWER CABLE 71 Soot Blower Panel Front Side Rotary Soot Blower (GF1) 0.37 415 0.6 30 19.8 3CX2.5 XLPE-Cu POWER

FRONT SIDE ROTARY SOOT BLOWER (GF1) - CONTROL CABLE 72 Soot Blower Panel Front Side Rotary Soot Blower (GF1) 6CX1.5 PVC-Cu CONTROL











SB - PLC PANEL REMOTE CONTROL CABLES (DIGITAL INPUTS)

79 Soot Blower Panel PLC Panel for the following Digital Input-1. 16CX1.5 PVC-Cu CONTROL 1. ORIGINAL POSITION FEEBACK - A1 2. ORIGINAL POSITION FEEBACK - A23. ORIGINAL POSITION FEEBACK - A34. ORIGINAL POSITION FEEBACK - A45. ORIGINAL POSITION FEEBACK - A56. ORIGINAL POSITION FEEBACK - A67. ORIGINAL POSITION FEEBACK - B1 8. ORIGINAL POSITION FEEBACK - B29. ORIGINAL POSITION FEEBACK - B310. ORIGINAL POSITION FEEBACK - B411. ORIGINAL POSITION FEEBACK - B512. ORIGINAL POSITION FEEBACK - B613. ORIGINAL POSITION FEEDBACK - C1 14. ORIGINAL POSITION FEEDBACK - C2

80 Soot Blower Panel PLC Panel for the following Digital Input-2. 16CX1.5 PVC-Cu CONTROL 15. ORIGINAL POSITION FEEDBACK - C316. ORIGINAL POSITION FEEDBACK - C417. ROTATING POSITION FEEDBACK - A1 18. ROTATING POSITION FEEDBACK - A219. ROTATING POSITION FEEDBACK - A320. ROTATING POSITION FEEDBACK - A421. ROTATING POSITION FEEDBACK - A522. ROTATING POSITION FEEDBACK - A623. ROTATING POSITION FEEDBACK - B1 24. ROTATING POSITION FEEDBACK - B225. ROTATING POSITION FEEDBACK - B326. ROTATING POSITION FEEDBACK - B427. ROTATING POSITION FEEDBACK - B528. ROTATING POSITION FEEDBACK - B6

81 Soot Blower Panel PLC Panel for the following Digital Input-3. 16CX1.5 PVC-Cu CONTROL 29. ROTATING POSITION FEEDBACK - C1 30. ROTATING POSITION FEEDBACK - C231. ROTATING POSITION FEEDBACK - C332. ROTATING POSITION FEEDBACK - C433. ORIGINAL POSITION FEEDBACK - R1 34. ORIGINAL POSITION FEEDBACK - R235. ORIGINAL POSITION FEEDBACK - R336. ORIGINAL POSITION FEEDBACK - R437. ORIGINAL POSITION FEEDBACK - R538. ORIGINAL POSITION FEEDBACK - R639. ORIGINAL POSITION FEEDBACK - L140. ORIGINAL POSITION FEEDBACK - L241. ORIGINAL POSITION FEEDBACK - L342. ORIGINAL POSITION FEEDBACK - L4

82 Soot Blower Panel PLC Panel for the following Digital Input-4. 16CX1.5 PVC-Cu CONTROL 43. ORIGINAL POSITION FEEDBACK - L544. ORIGINAL POSITION FEEDBACK - L645. ORIGINAL POSITION FEEDBACK - GB146. ORIGINAL POSITION FEEDBACK - GB247. ORIGINAL POSITION FEEDBACK - GB348. ORIGINAL POSITION FEEDBACK - GB449. ORIGINAL POSITION FEEDBACK - GF150. ORIGINAL POSITION FEEDBACK - GF251. ORIGINAL POSITION FEEDBACK - GF352. ORIGINAL POSITION FEEDBACK - GF453. EXTENDING FEEDBACK - (A)-Series (Wall Blower) 54. RETRACTING FEEDBACK - (A)-Series (Wall Blower)

55. OVERLOAD FEEDBACK - (A)-Series (Wall Blower) 56. EXTENDING FEEDBACK - (B)-Series (Wall Blower)

83 Soot Blower Panel PLC Panel for the following Digital Input-5. 14CX1.5 PVC-Cu CONTROL 57. RETRACATING FEEDBACK - (B)-Series (Wall Blower) 58. OVERLOAD FEEDBACK - (B)-Series (Wall Blower) 59. EXTENDING FEEDBACK - (L)-Series (Retractables SB) 60. RETRACTING FEEDBACK - (L)-Series (Retractables SB) 61. OVERLOAD FEEDBACK - (L)-Series (Retractables SB) 62. EXTENDING FEEDBACK - (R)-Series (Retractables SB) 63. RETRACTING FEEDBACK - (R)-Series (Retractables SB) 64. OVERLAOD FEEDBACK - (R)-Series (Retractables SB) 65. OVERLOAD FEEDBACK - (GB)-Series (Rotary SB) 66. OVERLOAD FEEDBACK - (GF)-Series (Rotary SB) 67. MOTOR POWER FAIL - SB PANEL 68. LOCAL CONTROL STATUS - SB PANEL

REMOTE CONTROL CABLES (DIGITAL OUTPUTS) 84 PLC Panel Soot Blower Panel fot the following Digital Outputs-1. 16CX1.5 PVC-Cu CONTROL

1. START COMMAND - A1 2. START COMMAND - A23. START COMMAND - A34. START COMMAND - A45. START COMMAND - A56. START COMMAND - A67. START COMMAND - B1 8. START COMMAND - B29. START COMMAND - B310. START COMMAND - B411. START COMMAND - B512. START COMMAND - B613. START COMMAND - C114. START COMMAND - C2

85 PLC Panel Soot Blower Panel fot the following Digital Outputs-2. 16CX1.5 PVC-Cu CONTROL 15. START COMMAND - C316. START COMMAND - C4 17. START COMMAND - L118. START COMMAND - L219. START COMMAND - L320. START COMMAND - L421. START COMMAND - L522. START COMMAND - L623. START COMMAND - R124. START COMMAND - R225. START COMAMND - R326. START COMMAND - R427. START COMMAND - R5 28. START COMMAND - R6

86 PLC Panel Soot Blower Panel fot the following Digital Outputs-3. 16CX1.5 PVC-Cu CONTROL 29. START COMMAND - GB130. START COMMAND - GB231. START COMMAND - GB332. START COMMAND GB433. START COMMAND - GF134. START COMMAND - GF235. START COMMAND - GF336. START COMMAND - GF437. RETRACTABLE COMMAND - Left/Rear Side Wall Blower 38. RETRACTABLE COMMAND - Right/Front Side Wall Blower 39. RETRACTABLE COMMAND - Left Side Retractable Soot Blower 40. RETRACTABLE COMMAND - Right Side Retractable Soot Blower 41. AUTO 42. REMOTE CONTROL 43. LOCAL CONTROL 44. SPARE

REMOTE CONTROL CABLES (ANALOG INPUTS) 87 Soot Blower Panel PLC Panel for the following Analog Inputs-1. 2PX1.5 PVC-Cu SIGNAL

1. (4-20)mA Current Feedback - Left Side Retractable Soot Blower 2. (4-20)mA Current Feedback - Right Side Retractable Soot Blower

REMOTE CONTROL CABLES (DIGITAL INPUTS) 88 PLC Panel (MV01) Motor Cut-Off Valve - 1 for the following Digital Inputs & Outputs. 10CX1.5 PVC-Cu CONTROL

RREMOTE CONTROL CABLE (DIGITAL INTPUT) 1. OPENED FEEDBACK 2. CLOSED FEEDBACK 3. TRIP FEEDBACK

RREMOTE CONTROL CABLE (DIGITAL OUTPUT) 1. OPEN MV012. CLOSE MV01

89 PLC Panel (MV02) Motor Cut-Off Valve - 2 for the following Digital Inputs & Outputs. 10CX1.5 PVC-Cu CONTROL RREMOTE CONTROL CABLE (DIGITAL INTPUT)

1. OPENED FEEDBACK 2. CLOSED FEEDBACK 3. TRIP FEEDBACK








REMOTE CONTROL CABLES (ANALOG INPUTS) 92 PLC Panel Equipment in the Field for the following Analog Inputs-2. 4PX1.5 PVC-Cu SIGNAL

1. (4-20)mA Blowing Pressure Feedback - Pressure Transmitter2. (4-20)mA Regulate Valve Position Feedback - Control Valve

REMOTE CONTROL CABLES (ANALOG OUTPUT) PLC Panel Pressure Control Valve at Soot Blowing Area for the following signal

1. (4-20)mA - Pressure Reference REMOTE CONTROL CABLES (DIGITAL INPUTS AND DIGITAL OUTPUT)

93 PLC Panel RREMOTE CONTROL CABLE (DIGITAL INTPUT) 10CX1.5 PVC-Cu CONTROL DCS Panel for the following Digital Inputs-61. PROGRAMM START 2. PROGRAMM RESET 3. PROGRAMM INTERRUPT4. BOILER TRIP

REMOTE CONTROL CABLES (DIGITAL OUTPUT) 10CX1.5 PVC-Cu CONTROL 94 DCS Panel PLC Panel for the following Digital Outputs-4.

1. SYSTEM ALARM2. PROGRAMM OPERATING 3. PROGRAMM INTERRUPT4. PROGRAMM FINISH

COAL FEEDER PANEL - 1 POWER CABLES

1 BMCC Coal Feeder Panel - 1 20A 415 20A 47 31.02 4CX6 XLPE-Cu POWER2 Coal Feeder Panel - 1 Coal Feeder Main Motor Load Break Switch - 1 3 415 5.2 30 19.8 3CX2.5 XLPE-Cu POWER3 Coal Feeder Main Motor Load Break Switch - 1 Coal Feeder Main Motor - 1 3 415 5.2 30 19.8 3CX2.5 XLPE-Cu POWER4 Coal Feeder Panel - 1 Coal Feeder Cleaning Motor Load Break Switch - 1 1.5 415 2.6 30 19.8 3CX2.5 XLPE-Cu POWER5 Coal Feeder Cleaning Motor Load Break Switch - 1 Coal Feeder Cleaning Motor - 1 1.5 415 2.6 30 19.8 3CX2.5 XLPE-Cu POWER6 Coal Feeder Panel - 1 JB (With Disconnected Type TB) for CEG#1@BO1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER7 JB (With Disconnected Type TB) for CEG#1@BO1 Coal Exit Gate#1 @ Bunker Outlet - 1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER8 Coal Feeder Panel - 1 JB (Disconnected Type TB) for CEG#2@CFO1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER9 JB (Disconnected Type TB) for CEG#2@CFO1 Coal Exit Gate#2@ Coal Feeder Outlet - 1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER

10 Coal Feeder Panel - 1 Coal Feeder 1 - Lighting (EL1, EL2, EL3) at Field 0.025 240 0.12 32 21.12 2CX2.5 XLPE-Cu POWERLOCAL CONTROL CABLES

11 Coal Feeder Panel - 1 To Limit switches in the Gates of Coal Feeder - 1 for the following Controls. 16CX1.5 PVC-Cu CONTROL 1. Coal Exit Gate#1@ Bunker Outlet-1 - Open Limit Switch (QS1-NC)

3. Coal Exit Gate#1 @ Bunker Outlet-1 - Close Limit Switch (QS2-NC)

5. Coal Exit Gate#2 @ Coal Feeder Outlet-1 - Open Limit Switch (QS8-NC)

7. Coal Exit Gate#2 @ Coal Feeder Outlet-1 - Close Limit Switch (QS9-NC)

12 Coal Feeder Panel - 1 COAL FEEDER BODY - SWITCHES-1 (FIELD) 8CX1.5 PVC-Cu CONTROL 10. Deviation - travel Switch (QS3 and QS4 in Parallel)

2. Coal Exit Gate#1 @ Bunker Outlet-1 - Open Limit Switch (QS1-NO) for OPEN Indicaiton in Panel.

4. Coal Exit Gate#1 @ Bunker Outlet-1 - Close Limit Switch (QS2-NO) for CLOSE Indicaiton in Panel.

6. Coal Exit Gate#2 @ Coal Feeder Outlet-1 - Open Limit Switch (QS8-NO) for OPEN Indication in Panel.

8. Coal Exit Gate#2 @ Coal Feeder Outlet-1 - Close Limit Switch (QS9-NO) for CLOSE Indication in Panel.

11. Alarm Blocking Switch - (QS5) 12. Temperature Switch - (QS8)

13 Coal Feeder Panel - 1 COAL FEEDER BODY - SWITCHES-2 (FIELD) 4PX1.5 PVC-Cu SIGNAL 13. Speed Switch - (QS6)14. Load Cell - (QS7)

REMOTE CONTROL CABLES (DIGITAL INPUTS AND DIGITAL OUTPUTS) 14 Coal Feeder Panel - 1 REMOTE CONTROL CABLES (DIGITAL INPUTS) 14CX1.5 PVC-Cu CONTROL

DCS Panel for the following Digital Inputs-11. COAL FEEDER MAIIN MOTOR-1 START - (DI1)2. CLEANING MOTOR START - (DI2)3. COAL EXIT GATE#1 @ BUNKER OUTLET-1 - OPEN FEEDBACK (QS1-NO) - (DI3)4. COAL EXIT GATE#1 @ BUNKER OUTLET-1 - CLOSE FEEDBACK (QS2-NO) - (DI4)5. IINVERTER FAILURE ALARM FROM VFD - (DI5)6. DEVIATION SIGNAL - (DI6)

15 Coal Feeder Panel - 1 DCS Panel for the following Digital Inputs-2 14CX1.5 PVC-Cu CONTROL 7. ALARM BLOCKING MATERIAL - (DI7) 8. FEED OFF ALARM - (DI8) 9. CHAIN ALARM - (DI9) 10. TEMERATURE ALARM - (D10)

REMOTE CONTROL CABLES (DIGITAL OUTPUTS) 16 DCS Panel Coal Feeder Panel - 1 for the following Digital Outputs 14CX1.5 PVC-Cu CONTROL

1. COAL FEEDER MAIN MOTOR-1 START - (DO1) 2. COAL FEEDER MAIN MOTOR-1 STOP - (DO2)3. COAL EXIT GATE#1 @ BUNKER OUTLET-1 - OPEN COMMAND - (DO3) 4. COAL EXIT GATE#1 @ BUNER OUTLET-1 - CLOSE COMMAND - (DO4) 5. COAL EXIT GATE#2 @ COAL FEEDER OUTLET-1 - OPEN COMMAND - (DO5) 6. COAL EXIT GATE#2 @ COAL FEEDER OUTLET-1 - CLOSE COMMAND - (DO6)

REMOTE CONTROL CABLE (ANALOG INPUT AND ANALOG OUTPUT) 17 Coal Feeder Panel - 1 (VFD) REMOTE CONTROL CABLE (ANALOG INPUT) 3PX1.5 PVC-Cu SIGNAL

DCS Panel for the following Analog Input. 1. (4-20mA) Speed Feedback - (AI1)

REMOTE CONTROL CABLE (ANALOG OUTPUT) DCS Panel Coal Feeder Panel - 1 (VFD) for the following Analog Output.

1. (4-20mA) Speed Reference - (AO1)COAL FEEDER PANEL - 2

POWER CABLE1 BMCC Coal Feeder Panel - 2 20A 415 20A 47 31.02 4CX6 XLPE-Cu POWER2 Coal Feeder Panel - 2 Coal Feeder Main Motor Load Break Switch - 2 3 415 5.2 30 19.8 3CX2.5 XLPE-Cu POWER3 Coal Feeder Main Motor Load Break Switch - 2 Coal Feeder Main Motor - 2 3 415 5.2 30 19.8 3CX2.5 XLPE-Cu POWER4 Coal Feeder Panel - 2 Coal Feeder Cleaning Motor Load Break Switch - 2 1.5 415 2.6 30 19.8 3CX2.5 XLPE-Cu POWER5 Coal Feeder Cleaning Motor Load Break Switch - 2 Coal Feeder Cleaning Motor - 2 1.5 415 2.6 30 19.8 3CX2.5 XLPE-Cu POWER6 Coal Feeder Panel - 2 JB (With Disconnected Type TB) for CEG#1@BO1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER7 JB (With Disconnected Type TB) for CEG#1@BO1 Coal Exit Gate#1 @ Bunker Outlet - 2 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER8 Coal Feeder Panel - 2 JB (Disconnected Type TB) for CEG#2@CFO1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER9 JB (Disconnected Type TB) for CEG#2@CFO1 Coal Exit Gate#2@ Coal Feeder Outlet - 2 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER

10 Coal Feeder Panel - 2 Coal Feeder 2 - Lighting (EL1, EL2, EL3) at Field 0.025 240 0.12 32 21.12 2CX2.5 XLPE-Cu POWERCONTROL CABLE





12 Coal Feeder Panel - 2 COAL FEEDER BODY - SWITCHES-1 (FIELD) 8CX1.5 PVC-Cu CONTROL 10. Deviation - travel Switch (QS3 and QS4 in Parallel)11. Alarm Blocking Switch - (QS5) 12. Temperature Switch - (QS8)


11. COAL EXIT GATE#2 @ COAL FEEDER OUTLET - 1 OPEN FEEDBACK (QS8-NO) - (D11)

12. COAL EXIT GATE#2 COAL FEEDER OUTLET - 1 CLOSE FEEDBACK (QS9-NO) - (D12)





REMOTE CONTROL CABLES (DIGITAL INPUT AND DIGITAL OUTPUT) 14 Coal Feeder Panel - 2 REMOTE CONTROL CABLES (DIGITAL INPUT) 14CX1.5 PVC-Cu CONTROL

DCS Panel for the following digital Inputs-1 1. COAL FEEDER MAIIN MOTOR-2 START - (DI1)2. CLEANING MOTOR START - (DI2)3. COAL EXIT GATE#1 @ BUNKER OUTLET-2 - OPEN FEEDBACK (QS1-NO) - (DI3)4. COAL EXIT GATE#1 @ BUNKER OUTLET-2 - CLOSE FEEDBACK (QS2-NO) - (DI4)5. IINVERTER FAILURE ALARM FROM VFD - (DI5)6. DEVIATION SIGNAL - (DI6)

15 Coal Feeder Panel - 2 DCS Panel for the following digital Inputs-2 14CX1.5 PVC-Cu CONTROL 7. ALARM BLOCKING MATERIAL - (DI7) 8. FEED OFF ALARM - (DI8) 9. CHAIN ALARM - (DI9) 10. TEMERATURE ALARM - (D10)

REMOTE CONTROL CABLE (DIGITAL OUTPUT) 16 DCS Panel Coal Feeder Panel - 2 for the following Digital Outputs 14CX1.5 PVC-Cu CONTROL


REMOTE CONTROL CABLE (ANALOG INPUT AND DIGITAL OUTPUT) 17 Coal Feeder Panel - 2 (VFD) REMOTE CONTROL CABLE (ANALOG INPUT) 3PX1.5 PVC-Cu SIGNAL




POWER CABLE1 BMCC Coal Feeder Panel - 3 20A 415 20A 47 31.02 4CX6 XLPE-Cu POWER 2 Coal Feeder Panel - 3 Coal Feeder Main Motor Load Break Switch - 3 3 415 5.2 30 19.8 3CX2.5 XLPE-Cu POWER3 Coal Feeder Main Motor Load Break Switch - 3 Coal Feeder Main Motor - 3 3 415 5.2 30 19.8 3CX2.5 XLPE-Cu POWER 4 Coal Feeder Panel - 3 Coal Feeder Cleaning Motor Load Break Switch - 3 1.5 415 2.6 30 19.8 3CX2.5 XLPE-Cu POWER 5 Coal Feeder Cleaning Motor Load Break Switch - 3 Coal Feeder Cleaning Motor - 3 1.5 415 2.6 30 19.8 3CX2.5 XLPE-Cu POWER 6 Coal Feeder Panel - 3 JB (With Disconnected Type TB) for CEG#1@BO1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER 7 JB (With Disconnected Type TB) for CEG#1@BO1 Coal Exit Gate#1 @ Bunker Outlet - 3 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER 8 Coal Feeder Panel - 3 JB (Disconnected Type TB) for CEG#2@CFO1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER 9 JB (Disconnected Type TB) for CEG#2@CFO1 Coal Exit Gate#2@ Coal Feeder Outlet - 3 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER














REMOTE CONTROL CABLE (DIGITAL INPUT AND DIGITAL OUTPUT) 14 Coal Feeder Panel - 3 REMOTE CONTROL CABLES (DIGITAL INPUT) 14CX1.5 PVC-Cu CONTROL

DCS Panel for the following digital Inputs-1 1. COAL FEEDER MAIIN MOTOR-3 START - (DI1)2. CLEANING MOTOR START - (DI2)3. COAL EXIT GATE#1 @ BUNKER OUTLET-3 - OPEN FEEDBACK (QS1-NO) - (DI3)4. COAL EXIT GATE#1 @ BUNKER OUTLET-3 - CLOSE FEEDBACK (QS2-NO) - (DI4)5. IINVERTER FAILURE ALARM FROM VFD - (DI5)6. DEVIATION SIGNAL - (DI6)


REMOTE CONTROL CABLES (DIGITAL OUTPUT) 16 DCS Panel Coal Feeder Panel - 3 for the following Digital Outputs-1 14CX1.5 PVC-Cu CONTROL






POWER CABLE 1 BMCC Coal Feeder Panel - 4 20A 415 20A 47 31.02 4CX6 XLPE-Cu POWER 2 Coal Feeder Panel - 4 Coal Feeder Main Motor Load Break Switch - 4 3 415 5.2 30 19.8 3CX2.5 XLPE-Cu POWER3 Coal Feeder Main Motor Load Break Switch - 4 Coal Feeder Main Motor - 4 3 415 5.2 30 19.8 3CX2.5 XLPE-Cu POWER 4 Coal Feeder Panel - 4 Coal Feeder Cleaning Motor Load Break Switch - 4 1.5 415 2.6 30 19.8 3CX2.5 XLPE-Cu POWER 5 Coal Feeder Cleaning Motor Load Break Switch - 4 Coal Feeder Cleaning Motor - 4 1.5 415 2.6 30 19.8 3CX2.5 XLPE-Cu POWER 6 Coal Feeder Panel - 4 JB (With Disconnected Type TB) for CEG#1@BO1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER 7 JB (With Disconnected Type TB) for CEG#1@BO1 Coal Exit Gate#1 @ Bunker Outlet - 4 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER 8 Coal Feeder Panel - 4 JB (Disconnected Type TB) for CEG#2@CFO1 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER 9 JB (Disconnected Type TB) for CEG#2@CFO1 Coal Exit Gate#2@ Coal Feeder Outlet - 4 1.1 415 1.9 30 19.8 3CX2.5 XLPE-Cu POWER








11. COAL EXIT GATE#2 @ COAL FEEDER OUTLET-3 OPEN FEEDBACK (QS8-NO) - (D11)

12. COAL EXIT GATE#2 COAL FEEDER OUTLET-3 CLOSE FEEDBACK (QS9-NO) - (D12)





REMOTE CONTROL CABLE (DIGITAL INPUT AND DIGITAL OUTPUT) 14 Coal Feeder Panel - 4 REMOTE CONTROL CABLE (DIGITAL INPUT) 14CX1.5 PVC-Cu CONTROL

DCS Panel for the following digital Inputs-11. COAL FEEDER MAIIN MOTOR-4 START - (DI1)2. CLEANING MOTOR START - (DI2)3. COAL EXIT GATE#1 @ BUNKER OUTLET-4 - OPEN FEEDBACK (QS1-NO) - (DI3)4. COAL EXIT GATE#1 @ BUNKER OUTLET-4 - CLOSE FEEDBACK (QS2-NO) - (DI4)5. IINVERTER FAILURE ALARM FROM VFD - (DI5)6. DEVIATION SIGNAL - (DI6)


REMOTE CONTROL CABLE (DIGITAL OUTPUT) 16 DCS Panel Coal Feeder Panel - 4 for the following Digital Outputs 14CX1.5 PVC-Cu CONTROL





1. (4-20mA) Speed Reference - (AO1)COAL MILL MOTOR - LUBE STATION CONTROL CABINET - 1

POWER CABLE 1 BMCC Coal Mill Motor - Lube Station Control Cabinet - 1 50A 415 50A 96 63.36 3CX25 XLPE - Al POWER2 Coal Mill Motor - Lube Station Control Cabinet - 1 Coal Mill Motor - Load Break Switch of Lube Oil Pump Motor - 1 5.5 415 9.6 36 23.76 4CX4 XLPE-Cu POWER3 Coal Mill Motor - Load Break Switch of Lube Oil Pump Motor - 1Coal Mill Motor - Lube Oil Pump Motor - 1 5.5 415 9.6 36 23.76 4CX4 XLPE-Cu POWER4 Coal Mill Motor - Lube Station Control Cabinet - 1 Load Break Switch of Lube Oil Tank - Heater 6 415 10.4 36 23.76 4CX4 XLPE-Cu POWER5 Load Break Switch of Lube Oil Tank - Heater Lube Oil Tank - Heater 6 415 10.4 36 23.76 4CX4 XLPE-Cu POWER6 Coal Mill Motor - Lube Station Control Cabinet - 1 Coal Mill Motor - Heat Tracing 150W 110 1.6 32 21.12 2CX2.5 XLPE-Cu POWER7 Coal Mill Motor - Lube Station Control Cabinet - 1 Stone Coal Collection Control Cabinet - 1 4A 415 4A 32 21.12 2CX2.5 XLPE-Cu POWER

REMOTE CONTROL CABLE (DIGITAL INPUT AND OUTPUT) 8 Coal Mill Motor - Lube Station Control Cabinet - 1 REMOTE CONTROL CABLE (DIGITAL INPUT) 10CX1.5 PVC-Cu CONTROL

DCS Panel for the following Digital Inputs-1. 1. LUBE OIL PUMP MOTOR ON 2. LUBE OIL TANK HEATER ON 3. HEAT TRACING ON 4. REMOTE CONTROL

9 Coal Mill Motor - Lube Station Control Cabinet - 1 DCS Panel for the following Digital Inputs-2. 10CX1.5 PVC-Cu CONTROL 5. LOCAL CONTROL 6. (LUBE OIL TANK HEATER) BREAKER (Q12) - ON 7. (LUBE OIL PUMP MOTOR) BREAKER (Q13) - ON8. CONTROL POWER SUPPLY 9. LUBE OIL PUMP MOTOR OVERLOAD

REMOTE CONTROL CABLE (DIGITAL OUTPUT) 10 DCS Panel Coal Mill Motor - Lube Station Control Cabinet - 1 for the following DOs 12CX1.5 PVC-Cu CONTROL

1. LUBE OIL PUMP MOTOR REMOTE START 2. LUBE OIL PUMP MOTOR REMOTE STOP 3. LUBE OIL TANK HEATER REMOTE OFF4. LUBE OIL TANK HEATER REMOTE ON5. HEAT TRACING REMOTE OFF 6. HEAT TRACING REMOTE ON

COAL MILL MOTOR - LUBE STATION CONTROL CABINET - 2 POWER CABLE

1 BMCC Coal Mill Motor - Lube Station Control Cabinet - 2 50A 415 50A 96 63.36 3CX25 XLPE - Al POWER2 Coal Mill Motor - Lube Station Control Cabinet - 2 Coal Mill Motor - Load Break Switch of Lube Oil Pump Motor - 2 5.5 415 9.6 36 23.76 4CX4 XLPE-Cu POWER

3 Coal Mill Motor - Lube Oil Pump Motor - 2 5.5 415 9.6 36 23.76 4CX4 XLPE-Cu POWER4 Coal Mill Motor - Lube Station Control Cabinet - 2 Load Break Switch of Lube Oil Tank - Heater 6 415 10.4 36 23.76 4CX4 XLPE-Cu POWER5 Load Break Switch of Lube Oil Tank - Heater Lube Oil Tank - Heater 6 415 10.4 36 23.76 4CX4 XLPE-Cu POWER6 Coal Mill Motor - Lube Station Control Cabinet - 2 Coal Mill Motor - Heat Tracing 150W 110 1.6 32 21.12 2CX2.5 XLPE-Cu POWER



Coal Mill Motor - Load Break Switch of Lube Oil Pump Motor - 2

7 Coal Mill Motor - Lube Station Control Cabinet - 2 Stone Coal Collection Control Cabinet - 2 4A 415 4A 32 21.12 2CX2.5 XLPE-Cu POWER







1 BMCC Coal Mill Motor - Lube Station Control Cabinet - 3 50A 415 50A 96 63.36 3CX25 XLPE - Al POWER2 Coal Mill Motor - Lube Station Control Cabinet - 3 Coal Mill Motor - Load Break Switch of Lube Oil Pump Motor - 3 5.5 415 9.6 36 23.76 4CX4 XLPE-Cu POWER3 Coal Mill Motor - LBS of Lube Oil Pump Motor - 3 Coal Mill Motor - Lube Oil Pump Motor - 3 5.5 415 9.6 36 23.76 4CX4 XLPE-Cu POWER4 Coal Mill Motor - Lube Station Control Cabinet - 3 Load Break Switch of Lube Oil Tank - Heater 6 415 10.4 36 23.76 4CX4 XLPE-Cu POWER5 Load Break Switch of Lube Oil Tank - Heater Lube Oil Tank - Heater 6 415 10.4 36 23.76 4CX4 XLPE-Cu POWER6 Coal Mill Motor - Lube Station Control Cabinet - 3 Coal Mill Motor - Heat Tracing 150W 110 1.6 32 21.12 2CX2.5 XLPE-Cu POWER7 Coal Mill Motor - Lube Station Control Cabinet - 3 Stone Coal Collection Control Cabinet - 3 4A 415 4A 32 21.12 2CX2.5 XLPE-Cu POWER







1 BMCC Coal Mill Motor - Lube Station Control Cabinet - 4 50A 415 50A 96 63.36 3CX25 XLPE - Al POWER2 Coal Mill Motor - Lube Station Control Cabinet - 4 Coal Mill Motor - Load Break Switch of Lube Oil Pump Motor - 4 5.5 415 9.6 36 23.76 4CX4 XLPE-Cu POWER

3 Coal Mill Motor - Lube Oil Pump Motor - 4 5.5 415 9.6 36 23.76 4CX4 XLPE-Cu POWER4 Coal Mill Motor - Lube Station Control Cabinet - 4 Load Break Switch of Lube Oil Tank - Heater 6 415 10.4 36 23.76 4CX4 XLPE-Cu POWER5 Load Break Switch of Lube Oil Tank - Heater Lube Oil Tank - Heater 6 415 10.4 36 23.76 4CX4 XLPE-Cu POWER6 Coal Mill Motor - Lube Station Control Cabinet - 4 Coal Mill Motor - Heat Tracing 150W 110 1.6 32 21.12 2CX2.5 XLPE-Cu POWER7 Coal Mill Motor - Lube Station Control Cabinet - 4 Stone Coal Collection Control Cabinet - 4 4A 415 4A 32 21.12 2CX2.5 XLPE-Cu POWER



9 Coal Mill Motor - Lube Station Control Cabinet - 4 DCS Panel for the following Digital Inputs-2. 10CX1.5 PVC-Cu CONTROL 5. LOCAL CONTROL 6. (LUBE OIL TANK HEATER) BREAKER (Q12) - ON 7. (LUBE OIL PUMP MOTOR) BREAKER (Q13) - ON

Coal Mill Motor - Load Break Switch of Lube Oil Pump Motor - 4

8. CONTROL POWER SUPPLY 9. LUBE OIL PUMP MOTOR OVERLOAD



STONE COAL COLLECTION CONTROL CABINET - 1POWER CABLES

1 Stone Coal Collection Control Cabinet - 1 Entrance Valve - 1 110V 32 21.12 2CX2.5 XLPE-Cu POWER2 Stone Coal Collection Control Cabinet - 1 Exit Valve - 1 110V 32 21.12 2CX2.5 XLPE-Cu POWER3 Stone Coal Collection Control Cabinet - 1 Level Controller - 1 110V 32 21.12 2CX2.5 XLPE-Cu POWER

CONTROL CABLES 4 Stone Coal Collection Control Cabinet - 1 I. Entrance Valve - 1 Limit Switches 12CX1.5 PVC-Cu CONTROL

1. SQ1 - Open Limit Switch (NO)2. SQ1 - Open Limit Switch (NC)3. SQ2 - Close Limit Switch (NO)4. SQ2 - Close Limit Switch (NC)

REMOTE COTROL (DIGITAL INPUT) 5. SQ1 - Open Limit Switch (NO) for DI 6. SQ2 - Close Limit Switch (NC) for DI

5 Stone Coal Collection Control Cabinet - 1 II. Exit Valve - 1 Limit Switches 12CX1.5 PVC-Cu CONTROL 1. SQ3 - Open Limit Switch (NC)2. SQ4 - Close Limit Switch (NO)3. SQ4 - Close Limit Switch (NC)

REMOTE COTROL (DIGITAL INPUT) 4. SQ3 - Open Limit Switch (NO) for DI5. SQ4 - Close Limit Switch (NO) for DI

REMOTE CONTROL CABLES (DIGITAL INPUTS) 6 Stone Coal Collection Control Cabinet - 1 DCS Panel for the following Digital Inputs. 12CX1.5 PVC-Cu CONTROL

1. COAL SCUTTLE ENTRANCE VALVE OPEN 2. COAL SCUTTLE ENTRANCE VALVE CLOSE 3. COAL SCUTTLE EXIT VALVE OPEN 4. COAL SCUTTLE EXIT VALVE CLOSE 5. LEVEL RISE (COM, NO, NC)








REMOTE CONTROL CABLES (DIGITAL INPUTS) 6 Stone Coal Collection Control Cabinet - 2 DCS Panel for the following Digtial Inputs. 12CX1.5 PVC-Cu CONTROL




















FLAME SCANNER CONTROL CABINET - 1 1. POWER CABLE

1 Customer - UPS Panel Flame Scanner Control Cabinet-1 - Incomer (QF01) - 1 10A 230V 10A 32 21.12 2CX2.5 XLPE-Cu POWER2 Customer - UPS Panel Flame Scanner Control Cabinet-1 - Incomer (QF02) - 2 10A 230V 10A 32 21.12 2CX2.5 XLPE-Cu POWER3 Flame Scanner Control Cabinet - 1 Flame Scanner Control Cabinet - 2 10A 230V 10A 32 21.12 2CX2.5 XLPE-Cu POWER4 Flame Scanner Control Cabinet - 1 Flame Scanner Control Cabinet - 3 10A 230V 10A 32 21.12 2CX2.5 XLPE-Cu POWER5 Flame Scanner Control Cabinet - 1 Flame Scanner Control Cabinet - 4 10A 230V 10A 32 21.12 2CX2.5 XLPE-Cu POWER

2. PAIR CABLE (OR) INSTRUMENT CABLE 6 Flame Sensor No.1 at Layer - AA Flame Scanner Control Cabinet - 1 - (XHT11-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 7 Flame Sensor No.2 at Layet - AB Flame Scanner Control Cabinet - 1 - (XHT21-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 8 Flame Sensor No.3 at Layer - BC Flame Scanner Control Cabinet - 1- (XHT31-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 9 Flame Sensor No.4 at Layer - A Flame Scanner Control Cabinet - 1 - (XHT41-Flame Detector) 1PX1.5 PVC-Cu SIGNAL

10 Flame Sensor No.5 at Layer - B Flame Scanner Control Cabinet - 1 - (XHT51-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 11 Flame Sensor No.6 at Layer - C Flame Scanner Control Cabinet - 1 - (XHT61-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 12 Flame Sensor No.7 at Layer - D Flame Scanner Control Cabinet - 1 - (XHT71-Flame Detector) 1PX1.5 PVC-Cu SIGNAL

3. REMOTE CONTROL CABLES (DIGITAL INPUT TO PLC) 13 Flame Scanner Control Cabinet - 1 LOCAL CONTROL CABINET - 2 (PLC PANEL) for the following Digital Inputs-1 16CX1.5 PVC-Cu CONTROL

1. LAYER-AA CORNER FLAME OK FROM XHT112. LAYER-AB CORNER FLAME OK FROM XHT213. LAYER-BC CORNER FLAME OK FROM XHT314. LAYER-A CORNER FLAME OK FROM XHT415. LAYER-B CORNER FLAME OK FROM XHT516. LAYER-C CORNER FLAME OK FROM XHT61 7. LAYER-D CORNER FLAME OK FROM XHT718. POWER LOSS (COMMON FOR INCR#1 - QF01 & INCR#2 - QF02) FROM KA0

4. REMOTE CONTROL CABLES (DIGITAL INPUT TO DCS) 14 Flame Scanner Control Cabinet - 1 DCS PANEL for the following Digital Inputs-2. 8CX1.5 PVC-Cu CONTROL

1. LAYER-AA CORNER FAULT FROM XHT112. LAYER-AB CORNER FAULT FROM XHT213. LAYER-BC CORNER FAULT FROM XHT314. LAYER-A CORNER FAULT FROM XHT41

15 Flame Scanner Control Cabinet - 1 DCS Panel for the following Digital Inputs-3. 10CX1.5 PVC-Cu CONTROL 5. LAYER-B CORNER FAULT FROM XHT516. LAYER-C CORNER FAULT FROM XHT617. LAYER-D CORNER FAULT FROM XHT718. POWER LOSS FROM INCOMER#1 (FROM QF01)9. POWER LOSS FROM IINCOMER#2 (FROM QF02)

5. REMOTE CONTROL CABLES (ANALOG INPUT) 16 Flame Scanner Control Cabinet - 1 DCS Panel for the following Analog Inputs. 8PX1.5 PVC-Cu SIGNAL

1. LAYER-AA CORNER INTENSITY (4-20mA) FROM XHT112. LAYER-AB CORNER INTENSITY (4-20mA) FROM XHT213. LAYER-BC CORNER INTENSITY (4-20mA) FROM XHT314. LAYER-A CORNER INTENSITY (4-20mA) FROM XHT415. LAYER-B CORNER INTENSITY (4-20mA) FROM XHT516. LAYER-C CORNER INTENSITY (4-20mA) FROM XHT617. LAYER-D CORNER INTENSITY (4-20mA) FROM XHT71

FLAME SCANNER CONTROL CABINET - 22. PAIR CABLE (OR) INSTRUMENT CABLE

1 Flame Sensor No.1 at Layer - AA Flame Scanner Control Cabinet - 2 - (XHT11-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 2 Flame Sensor No.2 at Layet - AB Flame Scanner Control Cabinet - 2 - (XHT21-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 3 Flame Sensor No.3 at Layer - BC Flame Scanner Control Cabinet - 2- (XHT31-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 4 Flame Sensor No.4 at Layer - A Flame Scanner Control Cabinet - 2 - (XHT41-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 5 Flame Sensor No.5 at Layer - B Flame Scanner Control Cabinet - 2 - (XHT51-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 6 Flame Sensor No.6 at Layer - C Flame Scanner Control Cabinet - 2 - (XHT61-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 7 Flame Sensor No.7 at Layer - D Flame Scanner Control Cabinet - 2 - (XHT71-Flame Detector) 1PX1.5 PVC-Cu SIGNAL


1. LAYER-AA CORNER FLAME OK FROM XHT112. LAYER-AB CORNER FLAME OK FROM XHT213. LAYER-BC CORNER FLAME OK FROM XHT314. LAYER-A CORNER FLAME OK FROM XHT415. LAYER-B CORNER FLAME OK FROM XHT516. LAYER-C CORNER FLAME OK FROM XHT61 7. LAYER-D CORNER FLAME OK FROM XHT718. POWER LOSS FROM KA0

4. REMOTE CONTROL CABLES (DIGITAL INPUT TO DCS) 4 Flame Scanner Control Cabinet - 2 DCS PANEL for the following Digital Inputs-2 16CX1.5 PVC-Cu CONTROL

1. LAYER-AA CORNER FAULT FROM XHT112. LAYER-AB CORNER FAULT FROM XHT213. LAYER-BC CORNER FAULT FROM XHT314. LAYER-A CORNER FAULT FROM XHT415. LAYER-B CORNER FAULT FROM XHT516. LAYER-C CORNER FAULT FROM XHT617. LAYER-D CORNER FAULT FROM XHT71




1 Flame Sensor No.1 at Layer - AA Flame Scanner Control Cabinet - 3 - (XHT11-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 2 Flame Sensor No.2 at Layet - AB Flame Scanner Control Cabinet - 3 - (XHT21-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 3 Flame Sensor No.3 at Layer - BC Flame Scanner Control Cabinet - 3 - (XHT31-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 4 Flame Sensor No.4 at Layer - A Flame Scanner Control Cabinet - 3 - (XHT41-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 5 Flame Sensor No.5 at Layer - B Flame Scanner Control Cabinet - 3 - (XHT51-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 6 Flame Sensor No.6 at Layer - C Flame Scanner Control Cabinet - 3 - (XHT61-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 7 Flame Sensor No.7 at Layer - D Flame Scanner Control Cabinet - 3 - (XHT71-Flame Detector) 1PX1.5 PVC-Cu SIGNAL








1 Flame Sensor No.1 at Layer - AA Flame Scanner Control Cabinet - 4 - (XHT11-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 2 Flame Sensor No.2 at Layet - AB Flame Scanner Control Cabinet - 4 - (XHT21-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 3 Flame Sensor No.3 at Layer - BC Flame Scanner Control Cabinet - 4 - (XHT31-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 4 Flame Sensor No.4 at Layer - A Flame Scanner Control Cabinet - 4 - (XHT41-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 5 Flame Sensor No.5 at Layer - B Flame Scanner Control Cabinet - 4 - (XHT51-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 6 Flame Sensor No.6 at Layer - C Flame Scanner Control Cabinet - 4 - (XHT61-Flame Detector) 1PX1.5 PVC-Cu SIGNAL 7 Flame Sensor No.7 at Layer - D Flame Scanner Control Cabinet - 4 - (XHT71-Flame Detector) 1PX1.5 PVC-Cu SIGNAL






1. LAYER-AA CORNER INTENSITY (4-20mA) FROM XHT112. LAYER-AB CORNER INTENSITY (4-20mA) FROM XHT213. LAYER-BC CORNER INTENSITY (4-20mA) FROM XHT314. LAYER-A CORNER INTENSITY (4-20mA) FROM XHT415. LAYER-B CORNER INTENSITY (4-20mA) FROM XHT51

6. LAYER-C CORNER INTENSITY (4-20mA) FROM XHT617. LAYER-D CORNER INTENSITY (4-20mA) FROM XHT71

LOCAL CONTROL CABINET#1 - 1POWER CABLE

1 UPS Panel Local Control Cabinet#1 - 1 10A 230 10A 32 21.12 2CX2.5 XLPE-Cu POWER2 Local Control Cabinet#1 - 1 LEVEL-AA - IGNITOR 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER3 Local Control Cabinet#1 - 1 LEVEL-AB - IGNITOR 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER4 Local Control Cabinet#1 - 1 LEVEL-BC - IGNITOR 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER5 Local Control Cabinet#1 - 1 LEVEL-AA - OIL VALVE (Solenoid-Control) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER6 Local Control Cabinet#1 - 1 LEVEL-AA - PURGE VALVE (Solenoid-Control) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER7 Local Control Cabinet#1 - 1 LEVEL-AA - IGNITOR (Solenoid of Ignitor Actuator) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER8 Local Control Cabinet#1 - 1 LEVEL-AB - OIL VALVE (Solenoid-Control) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER9 Local Control Cabinet#1 - 1 LEVEL-AB- PURGE VALVE (Solenoid-Control) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER

10 Local Control Cabinet#1 - 1 LEVEL-AB- ATOMIZING VALVE (Solenoid-Control) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER11 Local Control Cabinet#1 - 1 LEVEL-AB - IGNITOR (Solenoid of Ignitor Actuator) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER12 Local Control Cabinet#1 - 1 LEVEL-BC - OIL VALVE (Solenoid-Control) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER13 Local Control Cabinet#1 - 1 LEVEL-BC- PURGE VALVE (Solenoid-Control) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER14 Local Control Cabinet#1 - 1 LEVEL-BC- ATOMIZING VALVE (Solenoid-Control) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER15 Local Control Cabinet#1 - 1 LEVEL-BC - IGNITOR (Solenoid of Ignitor Actuator) 0.5 230 0.5 32 21.12 2CX2.5 XLPE-Cu POWER

CONTROL CABLE - (LEVEL-AA)16 Local Control Cabinet#1 - 1 CONTROL CABLE - (LEVEL-AA OIL VALVE) 8CX1.5 PVC-Cu CONTROL

To the Terminals of LEVEL-AA Oil valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel) 2. Close Limit Switch (Valve Close Indication in Panel)

CONTROL CABLE - (LEVEL-AA PURGE VALVE)To the Terminals of LEVEL-AA Purge valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel) 2. Close Limit Switch (Valve Close Indication in Panel)

CONTROL - (LEVEL-AA ACTUATOR)17 Local Control Cabinet#1 - 1 To the Terminal of LEVEL-AA Actuator for the follwing Controls. 12CX1.5 PVC-Cu CONTROL

1. Enter Oil Gun - Coil Point (for Enter) of Oil Gun 2. Retract Oil Gun - Coil Point (For Retract) of Oil Gun

CONTROL CABLE - (LEVEL-AB)18 Local Control Cabinet#1 - 1 CONTROL CABLE - (LEVEL-AB OIL VALVE) 12CX1.5 PVC-Cu CONTROL

To the Terminals of LEVEL-AB Oil valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel) 2. Close Limit Switch (Valve Close Indication in Panel)

CONTROL - (LEVEL-AB PURGE VALVE)To the Terminals of LEVEL-AB Purge valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel) 2. Close Limit Switch (Valve Close Indication in Panel)

CONTROL CABLE - (LEVEL-AB ATOMIZING VALVE)To the Terminals of LEVEL-AB Atomizing valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel) 2. Close Limit Switch (Valve Close Indication in Panel)

CONTROL CABLE - (LEVEL-AB ACTUATOR)19 Local Control Cabinet#1 - 1 To the Terminal of LEVEL-AB Actuator for the follwing Controls. 12CX1.5 PVC-Cu CONTROL


CONTROL CABLE - (LEVEL-BC)20 Local Control Cabinet#1 - 1 CONTROL CABLE - (LEVEL-BC OIL VALVE) 12CX1.5 PVC-Cu CONTROL

To the Terminals of LEVEL-BC Oil valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel) 2. Close Limit Switch (Valve Close Indication in Panel)

CONTROL CABLE - (LEVEL-BC PURGE VALVE)To the Terminals of LEVEL-BC Purge valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel) 2. Close Limit Switch (Valve Close Indication in Panel)

CONTROL CABLE - (LEVEL-BC ATOMIZING VALVE)To the Terminals of LEVEL-BC Atomizing valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel) 2. Close Limit Switch (Valve Close Indication in Panel)

3. Oil Gun Retracted - Indication in Panel from Retract Limit Switch (NO) of Actuator in the Field 4. Oil Gun Enterted - Indication in Panel from Enter Limit Switch (NO) of Actuator in the Field 5. Ignitor Entered - Indication in Panel from Enter Limit Switch (NO) of Actuator in the Field6. Ignitor Retracted - Indication in Panel from Retract Limit Switch (NO) of Actuator in the Field


CONTROL CABLE - (LEVEL-BC ACTUATOR)21 Local Control Cabinet#1 - 1 To the Terminal of LEVEL-BC Actuator for the follwing Controls. 12CX1.5 PVC-Cu CONTROL


REMOTE CONTROL CABLES (DIGITAL INPUT TO PLC) 22 Local Control Cabinet#1 - 1 TO Local Control Cabinet-2 (PLC PANEL) for the following Digital Inputs-1. 12CX1.5 PVC-Cu CONTROL

1. COMMON12. POWER ON3. LEVEL-AA 1# OIL VALVE OPENED 4. LEVEL-AA 1# OIL VALVE CLOSED5. LEVEL-AA 1# PURGE VALVE OPENED6. LEVEL-AA 1# PURGE VALVE CLOSED 7. LEVEL-AA 1# IGNITOR ON8. LEVEL-AA 1# OIL GUN ENTERED 9. LEVEL-AA 1# OIL GUN RETRACTED 10. LEVEL-AA 1# IGNITOR ENTERED11. LEVEL-AA 1# IGNITOR RETRACTED

23 Local Control Cabinet#1 - 1 TO Local Control Cabinet-2 (PLC PANEL) for the following Digital Inputs-2. 12CX1.5 PVC-Cu CONTROL 12. COMMON2 13. LEVEL-AB 1# OIL VALVE OPENED 14. LEVEL-AB 1# OIL VALVE CLOSED15. LEVEL-AB 1# PURGE VALVE OPENED16. LEVEL-AB 1# PURGE VALVE CLOSED 17. LEVEL-AB 1# IGNITOR ON18. LEVEL-AB 1# ATOMIZING VALVE OPENED 19. LEVEL-AB 1# ATOMIZING VALVE CLOSED 20. LEVEL-AB 1# OIL GUN ENTERED 21. LEVEL-AB 1# OIL GUN RETRACTED 22. LEVEL-AB 1# IGNITOR ENTERED23. LEVEL-AB 1# IGNITOR RETRACTED

24 Local Control Cabinet#1 - 1 TO Local Control Cabinet-2 (PLC PANEL) for the following Digital Inputs-3. 12CX1.5 PVC-Cu CONTROL 24. COMMON325. LEVEL-BC 1# OIL VALVE OPENED 26. LEVEL-BC 1# OIL VALVE CLOSED27. LEVEL-BC 1# PURGE VALVE OPENED28. LEVEL-BC 1# PURGE VALVE CLOSED 29 LEVEL-BC 1# IGNITOR ON30. LEVEL-BC 1# ATOMIZING VALVE OPENED 31. LEVEL-BC 1# ATOMIZING VALVE CLOSED 32. LEVEL-BC 1# OIL GUN ENTERED 33. LEVEL-BC 1# OIL GUN RETRACTED 34. LEVEL-BC 1# IGNITOR ENTERED35. LEVEL-BC 1# IGNITOR RETRACTED

REMOTE CONTROL CABLES (DIGITAL OUTPUT FROM PLC) 25 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for the following Digital Outputs-1. 12CX1.5 PVC-Cu CONTROL

1. MFT 2. LOCAL PERMISSIVE 3. LEVEL-AA OPEN 1# OIL VALVE 4. LEVEL-AA CLOSE 1# OIL VALVE 5. LEVEL-AA OPEN 1# PURGE VALVE 6. LEVEL-AA CLOSE 1# PURGE VALVE

26 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for the following Digital Outputs-2. 10CX1.5 PVC-Cu CONTROL 7. LEVEL-AA ENTER 1# OIL GUN8. LEVEL-AA RETRACT 1# OIL GUN9. LEVEL-AA ENTER 1# IGNITOR10. LEVEL-AA RETRACT 1# IGNITOR 11. LEVEL-AA TURN ON 1# IGNITOR

27 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for the following Digital Outputs-3. 12CX1.5 PVC-Cu CONTROL 12. LEVEL-AB OPEN 1# OIL VALVE 13. LEVEL-AB CLOSE 1# OIL VALVE 14. LEVEL-AB OPEN 1# PURGE VALVE 15. LEVEL-AB CLOSE 1# PURGE VALVE 16. LEVEL-AB OPEN 1# ATOMIZING VALVE 17. LEVEL-AB CLOSE 1# ATOMIZING VALVE

3. Oil Gun Retracted - Indication in Panel from Retract Limit Switch (NO) of Actuator in the Field 4. Oil Gun Enterted - Indication in Panel from Enter Limit Switch (NO) of Actuator in the Field

5. Ignitor Entered - Indication in Panel from Enter Limit Switch (NO) of Actuator in the Field6. Ignitor Retracted - Indication in Panel from Retract Limit Switch (NO) of Actuator in the Field

28 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for the following Digital Outputs-4. 10CX1.5 PVC-Cu CONTROL 18. LEVEL-AB ENTER 1# OIL GUN19. LEVEL-AB RETRACT 1# OIL GUN20. LEVEL-AB ENTER 1# IGNITOR21. LEVEL-AB RETRACT 1# IGNITOR 22. LEVEL-AB TURN ON 1# IGNITOR

29 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for the following Digital Outputs-5. 12CX1.5 PVC-Cu CONTROL 23. LEVEL-BC OPEN 1# OIL VALVE 24. LEVEL-BC CLOSE 1# OIL VALVE 25. LEVEL-BC OPEN 1# PURGE VALVE 26. LEVEL-BC CLOSE 1# PURGE VALVE 27. LEVEL-BC OPEN 1# ATOMIZING VALVE 28. LEVEL-BC CLOSE 1# ATOMIZING VALVE

30 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#1 - 1 for the following Digital Outputs-6. 10CX1.5 PVC-Cu CONTROL 29. LEVEL-BC ENTER 1# OIL GUN30. LEVEL-BC RETRACT 1# OIL GUN31. LEVEL-BC ENTER 1# IGNITOR32. LEVEL-BC RETRACT 1# IGNITOR 33. LEVEL-BC TURN ON 1# IGNITOR























REMOTE CONTROL CABLES (DIGITAL INPUT TO PLC) 22 Local Control Cabinet#2 - 1 To Local Control Cabinet-2 (PLC PANEL) for the following Digital Inputs-1. 12CX1.5 PVC-Cu CONTROL


23 Local Control Cabinet#2 - 1 To Local Control Cabinet-2 (PLC PANEL) for the following Digital Inputs-2. 12CX1.5 PVC-Cu CONTROL 12. COMMON213. LEVEL-AB 2# OIL VALVE OPENED 14. LEVEL-AB 2# OIL VALVE CLOSED15. LEVEL-AB 2# PURGE VALVE OPENED16. LEVEL-AB 2# PURGE VALVE CLOSED 17. LEVEL-AB 2# IGNITOR ON18. LEVEL-AB 2# ATOMIZING VALVE OPENED 19. LEVEL-AB 2# ATOMIZING VALVE CLOSED 20. LEVEL-AB 2# OIL GUN ENTERED 21. LEVEL-AB 2# OIL GUN RETRACTED 22. LEVEL-AB 2# IGNITOR ENTERED23. LEVEL-AB 2# IGNITOR RETRACTED

24 Local Control Cabinet#2 - 1 To Local Control Cabinet-2 (PLC PANEL) for the following Digital Inputs-3. 12CX1.5 PVC-Cu CONTROL 24. COMMON325. LEVEL-BC 2# OIL VALVE OPENED 26. LEVEL-BC 2# OIL VALVE CLOSED27. LEVEL-BC 2# PURGE VALVE OPENED28. LEVEL-BC 2# PURGE VALVE CLOSED 29 LEVEL-BC 2# IGNITOR ON30. LEVEL-BC 2# ATOMIZING VALVE OPENED 31. LEVEL-BC 2# ATOMIZING VALVE CLOSED 32. LEVEL-BC 2# OIL GUN ENTERED 33. LEVEL-BC 2# OIL GUN RETRACTED 34. LEVEL-BC 2# IGNITOR ENTERED35. LEVEL-BC 2# IGNITOR RETRACTED



26 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#2 - 1 for the following Digital Outputs-2. 10CX1.5 PVC-Cu CONTROL 7. LEVEL-AA ENTER 2# OIL GUN8. LEVEL-AA RETRACT 2# OIL GUN



9. LEVEL-AA ENTER 2# IGNITOR10. LEVEL-AA RETRACT 2# IGNITOR 11. LEVEL-AA TURN ON 2# IGNITOR
















CONTROL CABLE - (LEVEL-AB ATOMIZING VALVE)To the Terminals of LEVEL-AB Atomizing valve for the following Controls. 1. Open Limit Switch (Valve Open Indicaiton in Panel)


2. Close Limit Switch (Valve Close Indication in Panel)




27 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for the following Digital Outputs-3 12CX1.5 PVC-Cu CONTROL 12. LEVEL-AB OPEN 3# OIL VALVE 13. LEVEL-AB CLOSE 3# OIL VALVE 14. LEVEL-AB OPEN 3# PURGE VALVE 15. LEVEL-AB CLOSE 3# PURGE VALVE 16. LEVEL-AB OPEN 3# ATOMIZING VALVE 17. LEVEL-AB CLOSE 3# ATOMIZING VALVE

28 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for the following Digital Outputs-4 10CX1.5 PVC-Cu CONTROL 18. LEVEL-AB ENTER 3# OIL GUN19. LEVEL-AB RETRACT 3# OIL GUN20. LEVEL-AB ENTER 3# IGNITOR21. LEVEL-AB RETRACT 3# IGNITOR 22. LEVEL-AB TURN ON 3# IGNITOR

29 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for the following Digital Outputs-5 12CX1.5 PVC-Cu CONTROL 23. LEVEL-BC OPEN 3# OIL VALVE 24. LEVEL-BC CLOSE 3# OIL VALVE 25. LEVEL-BC OPEN 3# PURGE VALVE 26. LEVEL-BC CLOSE 3# PURGE VALVE 27. LEVEL-BC OPEN 3# ATOMIZING VALVE 28. LEVEL-BC CLOSE 3# ATOMIZING VALVE

30 Local Control Cabinet - 2 (Logic Control Cabinet) Local Control Cabinet#3 - 1 for the following Digital Outputs-6 10CX1.5 PVC-Cu CONTROL 29. LEVEL-BC ENTER 3# OIL GUN30. LEVEL-BC RETRACT 3# OIL GUN31. LEVEL-BC ENTER 3# IGNITOR32. LEVEL-BC RETRACT 3# IGNITOR 33. LEVEL-BC TURN ON 3# IGNITOR








1. Enter Oil Gun - Coil Point (for Enter) of Oil Gun 2. Retract Oil Gun - Coil Point (For Retract) of Oil Gun 3. Oil Gun Retracted - Indication in Panel from Retract Limit Switch (NO) of Actuator in the Field 4. Oil Gun Enterted - Indication in Panel from Enter Limit Switch (NO) of Actuator in the Field









LOCAL CONTROL CABINET - 2 (or) LOGIC CONTROL CABINET1 UPS Panel Local Control Cabinet - 2 (or) Logic Control Panel 10A 230 10A 32 21.12 2CX2.5 XLPE-Cu POWER2 Local Control Cabinet - 2 (or) Logic Control Panel LDO I/L Shut-Off Valve 0.5 230 0.5 33 21.78 2CX2.5 XLPE-Cu POWER3 Local Control Cabinet - 2 (or) Logic Control Panel LDO Return to I/L Valve 0.5 230 0.5 33 21.78 2CX2.5 XLPE-Cu POWER4 Local Control Cabinet - 2 (or) Logic Control Panel HFO I/L Shut-Off Valve 0.5 230 0.5 33 21.78 2CX2.5 XLPE-Cu POWER5 Local Control Cabinet - 2 (or) Logic Control Panel HFO Return to I/L Valve 0.5 230 0.5 33 21.78 2CX2.5 XLPE-Cu POWER

REMOTE CONTROL CABLE (DIGITAL INPUT TO PLC) 4 Local Control Cabinet - 2 (Logic Control Cabinet) To the Following Field Valves for Digital Inputs-1 8CX1.5 PVC-Cu CONTROL

1. LDO I/L SHUT OFF VALVE OPENED (Open Contact) 2. LDO I/L SHUT OFF VALVE CLOSED (Close Contact) 3. HFO I/L SHUT OFF VALVE OPENED (Open Contact) 4. HFO I/L SHUT OFF VALVE CLOSED (Close Contact)

REMOTE CONTROL CABLES (DIGITAL INPUT TO PLC) 5 Local Control Cabinet - 2 (Logic Control Cabinet) To the Following Field Valves for Digital Inputs-2 8CX1.5 PVC-Cu CONTROL

5. LDO RETURN TO I/L VALVE OPENED (Open Contact) 6. LDO RETURN TO I/L VALVE CLOSED (Close Contact) 7. HFO RETURN TO I/L VALVE OPENED (Open Contact) 8. HFO RETURN TO I/L VALVE CLOSED (Close Contact)

REMOTE CONTROL CABLE (DIGITAL INPUT TO DCS FROM PLC PANEL) 6 Local Control Cabinet - 2 (Logic Control Cabinet) DCS Panel for the following Digital Inputs-3. 14CX1.5 PVC-Cu CONTROL

1. SCANNER AIR FAN - A START 2. SCANNER AIR FAN - A STOP 3. SCANNER AIR FAN - B START 4. SCANNER AIR FAN - B STOP 5. SCANNER AIR FAN - A REMOTE 6. SCANNER AIR FAN - B REMOTE

REMOTE CONTROL CABLE (DIGITAL INPUT TO DCS FROM PLC PANEL) 7 Local Control Cabinet - 2 (Logic Control Cabinet) To the Following for Digital Inputs-4 14CX1.5 PVC-Cu CONTROL

1. PURGE START2. PURGE PERMITTED3. PURGE RUNNING4. PURGE INTERRUPTED5. MFT 6. MFT

REMOTE CONTROL CABLE (DIGITAL OUTPUT FROM DCS) 8 DCS Panel Local Control Cabinet - 2 (Logic Control Cabinet) for Digital Outputs-1 16CX1.5 PVC-Cu CONTROL

1. LDO PRESSURE SWITCH LOW 2. LDO TEMPERATURE SWITCH LOW 3. HFO PRESSURE SWITCH LOW 4. HFO TEMPERATURE SWITCH 5. DRUM LEVEL LOW 6. DRUM LEVEL HIGH 7. TOTAL AIR FLOW <25%


1. FURNACE PRESSURE HIGH HIGH - 1 2. FURNACE PRESSURE HIGH HIGH - 2 3. FURNACE PRESSURE HIGH HIGH - 3 4. HEAVY OIL PUT IN 5. FURNACE PRESSURE LOW LOW - 16. FURNACE PRESSURE LOW LOW - 2 7. FURNACE PRESSURE LOW LOW - 3


1.SCANNER AIR FAN PRESSURE LOW LOW - 12. SCANNER AIR FAN PRESSURE LOW LOW - 2 3. SCANNER AIR FAN PRESSURE LOW LOW - 3 4. ALL FD FAN TRIP 5. ALL ID FAN TRIP 6. ALL PA FAN TRIP


1.SCANNER AIR FAN - A READY TO START 2. SCANNER AIR FAN - A MOTOR RUNNING 3. SCANNER AIR FAN - A MOTOR OVL TRIP 4. SCANNER AIR FAN - B READY TO START 5. SCANNER AIR FAN - B MOTOR RUNNING 6. SCANNER AIR FAN - B MOTOR OVL TRIP


1.SCANNER AIR FAN - POWER FAULT 2. SCANNER AIR FAN - PROGRAM START 3. SCANNER AIR FAN COMMON DISCH HDR PRESSURE LOW

SKY CLIMBER PANEL POWER CABLE

1 BMCC-1 Sky Climber Panel 200A 415 200A 62 40.92 4CX10 XLPE-Cu POWER2 Sky Climber Panel Hosit - Motor 11 415 19.1 47 31.02 3CX6 XLPE-Cu POWER

OVER HEAD TRACK CRANE ELECTRICAL CONTROL BOX (A10) - POWER CABLES

1 W11 - CUSTOMER PANEL (BMCC) Electric Control Box (A10) - Incomer 415 62 40.92 3CX10 XLPE - Cu POWER 2 W12 - Electrical Control Box (A10) Travelling Motor (12-M11) 0.8 415 1.4 22 14.52 2(3CX2.5) XLPE - Cu POWER 3 W13 - Electrical Control Box (A10) Travelling Motor (12-M12) 0.8 415 1.4 22 14.52 2(3CX2.5) XLPE - Cu POWER 4 W14 - Electrical Control Box (A10) Travelling Motor (12-M13) 0.8 415 1.4 22 14.52 2(3CX2.5) XLPE - Cu POWER 5 W15 - Electrical Control Box (A10) Travelling Motor (12-M14) 0.8 415 1.4 22 14.52 2(3CX2.5) XLPE - Cu POWER 6 Electrical Control Box (A10) Travelling Motor - Brake (Y11, Y12, Y13, Y14) 415 22 14.52 3CX2.5 XLPE - Cu POWER 7 W16 - Electrical Control Box (A10) #1 Brake Motor - (16-Y11) 0.66 415 1.1 22 14.52 3CX2.5 XLPE - Cu POWER 8 W17 - Electrical Control Box (A10) #2 Brake Motor - (16-Y12) 0.66 415 1.1 22 14.52 3CX2.5 XLPE - Cu POWER

ELECTRICAL CONTROL BOX (A11) - POWER CABLES 9 W22 - Electric Control Box (A10) Electric Control Box (A11) - Incomer 220 2CX2.5 XLPE - Cu POWER

#1 HOIST (05) CONTROL BOX (A12) - POWER CABLES 10 W51 - Electrical Control Box (A10) #1 Hoist Control Box (A12) - Incomer 415 47 31.02 3CX6 XLPE - Cu POWER 11 W32 - #1 Hoist (05) Control Box (A12) #1 Hoist Slow Motor (05-M12) 4.3 415 7.5 22 14.52 3CX2.5 XLPE - Cu POWER 12 W32.1 - #1 Hoist (05) Control Box (A12) #1 Hoist Fast Motor (05-M11) 13 415 22.6 47 31.02 3CX6 XLPE - Cu POWER 13 W33 - #1 Hoist (05) Control Box (A12) #1 Traversing Motor (10-M11) 0.13 415 0.2 22 14.52 2X(3CX2.5) XLPE - Cu POWER 14 W34 - #1 Hoist (05) Control Box (A12) #1 Traversing Motor (10-M12) 0.4 415 0.7 22 14.52 2X(3CX2.5) XLPE - Cu POWER 15 #1 Hosit Control Box (A12) #1 Traversing Motor - Brakes (Y11&Y12) 415 22 14.52 3CX2.5 XLPE - Cu POWER

#2 HOIST (06) CONTROL BOX (A13) - POWER CABLES 16 W61 - Electrical Control Box (A10) #2 Hoist Control Box (A13) - Incomer 415 47 31.02 3CX6 XLPE - Cu POWER 17 W42 - #2 Hoist (06) Control Box (A13) #2 Hoist Slow Motor (06-M12) 4.3 415 7.5 47 31.02 3CX6 XLPE - Cu POWER 18 W42.1 - #2 (06) Hoist Control Box (A13) #2 Hoist Fast Motor (06-M11) 13 415 22.6 22 14.52 3CX2.5 XLPE - Cu POWER 19 W43 - #2 Hoist (06) Control Box (A13) #2 Traversing Motor (11-M11) 0.13 415 0.2 22 14.52 2X(3CX2.5) XLPE - Cu POWER 20 W44 - #2 Hoist (06) Control Box (A13) #2 Traversing Motor (11-M12) 0.4 415 0.7 22 14.52 2X(3CX2.5) XLPE - Cu POWER 21 #2 Hoist (06) Control Box (A13) #2 Traversing Motor - Brake (Y11&Y12) 415 22 14.52 3CX2.5 XLPE - Cu POWER

CONTROL CABLES 22 W35 - #1 Hoist (05) Control Box (A12) #1 Hoist (05) Proximity Switch - (05-S55) 2X1.5 PVC - Cu CONTROL 23 W31 - #1 Hoist (05) Control Box (A12) #1 Hoist Limit Switch (05 - S90) 2X(3X1.5) XLPE - Cu POWER 24 W45 - #2 Hoist (06) Control Box (A13) #2 Hoist (06) Proximity Switch - (06-S56) 2X1.5 PVC - Cu CONTROL 25 W41 - #2 Hoist (06) Control Box (A13) #2 Hoist Limit Switch (06-S90) 2X(3X1.5) XLPE - Cu POWER 26 W25 - Electrical Control Box (A10) #1 Travelling Limit Switch - (12-S91) 2X1.5 PVC - Cu CONTROL 27 W26 - Electrical Control Box (A10) #2 Travelling Limit Switch - (12-S92) 2X1.5 PVC - Cu CONTROL 28 W22 - Electrical Control Box (A10) Electrical Control Box (A11) 8X(2X1.5) PVC - Cu CONTROL 29 W52 - Electrical Control Box (A10) #1 Hoist (05) Control Box (A12) 3X1.5 PVC - Cu CONTROL 30 W62 - Electrical Control Box (A10) #2 Hoist (06) Control Box (A13) 3X1.5 PVC - Cu CONTROL

31 W18 - Electrical Control Box (A11) #1 Lifting Limit Switch - (16-S91)

2X(2X1.5)PVC - Cu CONTROL

#2 Lifting Limit Switch - (16-S92) PVC - Cu CONTROL

32 W19 - Electrical Control Box (A11) #3 Lifting Limit Switch - (16-S93)


#4 Lifting Limit Switch - (16-S94) PVC - Cu CONTROL

33 W20 - Electrical Control Box (A11) #1 Proximity Switch - (16-S51)


#2 Proximity Switch - (16-S52) PVC - Cu CONTROL

34 W21 - Electrical Control Box (A11) #3 Proximity Switch - (16-S53)


#4 Proximity Switch - (16-S54) PVC - Cu CONTROL 35 W23 - Electrical Control Box (A11) A6 7X(2X1.5) PVC - Cu CONTROL 36 W24 - Electrical Control Box (A11) A01 - Remote Control Device Power Supply 2X1.5 PVC - Cu CONTROL 37 W53 - Electrical Control Box (A11) #1 Hoist (05) Control Box (A12) 3X(3X1.5) PVC - Cu CONTROL 38 W63 - Electrical Control Box (A11) #2 Hoist (06) Control Box (A13) 3X(3X1.5) PVC - Cu CONTROL 39 W71 - Electrical Control Box (A11) A01 - Remote Control Device (Control Button Box) 14X1.5 PVC - Cu CONTROL 40 W72 - Electrical Control Box (A11) A02 - Signal Indicating Device 14X1.5 PVC - Cu CONTROL

NOTE 1 The above Cable Sizing Document contains the Data of all the Cable (such as Power, Local Control, Remote Control) for an Individual Panel. (Separate Cable List also has been provided for Power, Local Control and Remote Control for Analog & Digital Ios.) 2 The Cable Sizing is given only for the Panels supplied by GPSPL. 3 For Analog Input and Analog Output, We have considered the Multipair Cable. 4 For Overhead Track Crane We have given the Cable as suggested by our Chinese vendor.

copy of control & signal cable, gland, lug requirement (supporting document revised on...

Documents