coordinate metrology society conference advance agenda...renaissance orlando at seaworld as of july...
TRANSCRIPT
Renaissance Orlando at SeaWorldAs of July 8, 2019
Advance AgendaThe Premier Conference for 3D Measurement Professionals
Coordinate Metrology Society Conference
Dolphins anD astronauts
TimeActivity Location
Start End
7:00 AM 5:00 PM Boeing-Only Meeting (Boeing Badge Required) Palani A&B
7:00 AM 5:00 PM Siemens-Only Meeting (By Invitation) Nomeus
7:00 AM 5:00 PM Newport News Shipbuilding Meeting (By Invitation) Tarpon A
8:00 AM 5:00 PM Registration/Check-In Open Exhibitors / Speakers Oceans Foyer
8:00AM 5:00 PMExhibitor Hall Open for Set-up
Badge RequiredOceans 1–8
12:00 PM 4:30 PM Training Sponsored by FARO: Ask the AE Tarpon B
12:00 PM 5:00 PMRegistration / Check-In Open
AttendeesOceans Foyer
1:00 PM 5:00 PM
CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing
Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing
Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS
to take the Level 1 Exam.
Coral B&C
5:30 PM 6:00 PMNew Attendee Orientation
with CMSC Chair Scott SandwithPalani A
6:30 PM 8:30 PM
CMSC Icebreaker Sponsored by
FAROOceans Foyer
General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only
MONDAY July 22, 2019 CMSC Agenda
TUESDAY July 23, 2019 CMSC Agenda
General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only
TimeActivity Location
Start End
6:30 AM 8:30 AM Breakfast Crystal D&E
8:00 AM 2:30 PM Registration Open Oceans Foyer
8:00 AM 8:20 AM Chairman’s Opening Address: Scott Sandwith Oceans 9–12
8:20 AM 9:00 AM Keynote Speaker: Michael Raphael Oceans 9–12
9:00 AM 9:30 AMPresentation: Creating a New Concept in Performance-
Built Sport CatamaransSpeaker: Scott Porta, Porta Performance/FARO
Oceans 9–12
9:00 AM 12:00 PM Training Sponsored by FARO: CAM2 2019 Update Tarpon B
9:00 AM 3:00 PM Training Sponsored by ECM: CMS Certification Prep Walu
9:15 AM 11:45 AM Training Sponsored by Verisurf: Ask the Engineer Veiltail
9:30 AM 10:00 AM
Presentation: Subtle Sources of Error in Laser Trackers Due to Dispersion in the Internal Optical Elements
Speaker: David H. Parker, Parker Intellectual Property Enterprises
Oceans 9–12
9:30 AM 11:30 AM Training Sponsored by NRK: Intro to SpatialAnalyzer Nomeus
10:00 AM 10:30 AM Presentation: Thickness Inspection of Composite Parts
Speaker: Mark Haynes, Spirit AerosystemsOceans 9–12
10:30 AM 5:00 PM CMS Executive Committee Election Polls Open(or vote anytime on personal computer) Oceans Foyer
10:30 AM 11:00 AM
Presentation: Metrology in the R&D for a High Repetition Rate Multi User X-ray
Free-Electron Laser FacilitySpeaker: William Jansma, Argonne National Laboratory
Oceans 9–12
11:00 AM 11:30 AM
Presentation: A Special Target Set for Laser Scanner Spatial Performance Calibration
Speaker: Fangfang Liu, Shanghai Institute of Metrology and Testing Technology
Oceans 9–12
TUESDAY July 23, 2019 CMSC Agenda
General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only
TimeActivity Location
Start End
11:30 AM 12:00 PM
Presentation: Part Density Estimation Using a Laser Scanner
Speaker: Joshua Montano, Los Alamos National Laboratory
Oceans 9–12
12:00 PM 1:30 PM Lunch Co-Sponsored by Quality Magazine & GSI Crystal D&E
12:30PM 5:30 PM Exhibition Hall Open Oceans 1–8
1:00 PM 1:30 PM EZ - Spotlight On New Technology: Accurex Oceans 1–8
1:00 PM 3:00 PM Training Sponsored by NRK: Automated Solutions Nomeus
1:00 PM 4:00 PMTraining Sponsored by FARO: RPM–Programming
Repeat Part Inspections in CAM2Tarpon B
1:00 PM 5:00 PM
CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing
Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing
Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS
to take the Level 1 Exam.
Coral B&C
1:30 PM 2:00 PM EZ - Spotlight On New Technology: Accurex Oceans 1–8
1:30 PM 4:00 PMTraining Sponsored by Verisurf:
Automating Inspection WorkflowsVeiltail
2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8
3:00 PM 3:30 PM EZ - Spotlight On New Technology: Surphaser Oceans 1–8
3:30 PM 4:30 PM EZ - Ask The Experts: Metrology Applications Oceans 1–8
4:30 PM 5:30 PM EZ - Jeopardy Oceans 1–8
5:00 PM 9:00 PM GSI Users Group Meeting (By Invitation) Palani A
5:00 PM 9:00 PM API Users Group Meeting (By Invitation) Tarpon A
WEDNESDAY July 24, 2019 CMSC Agenda
General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only
TimeActivity Location
Start End
5:15 AM 7:30 AM Fun Run Meet at Oceans Porte-Cochere
6:30 AM 8:30 AM Breakfast Co-Sponsored by Brunson Crystal D&E
8:00 AM 4:30 PM Registration Open Oceans Foyer
8:00 AM 8:15 AM Conference Updates: Scott Sandwith Oceans 9–12
8:00 AM 12:00 PM
CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing
Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing
Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS
to take the Level 1 Exam.
Coral B&C
8:00 AM 4:30 PM CMS Executive Committee Election Polls Open(or vote anytime on personal computer) Oceans Foyer
8:30 AM 9:00 AMPresentation: Metrology Apprenticeship at
Newport News Shipbuilding Speaker: Jessica Walker, Newport News Shipbuilding
Oceans 9–12
9:00 AM 9:30 AM Presentation: DKIST’s Journey of Using a Laser TrackerSpeaker: Shawn Haar, National Solar Observatory Oceans 9–12
9:00 AM 12:00 PM Training Sponsored by 3D Systems: Geomagic Design X Tarpon A
9:00 AM 12:00 PM Training Sponsored by FARO: Introduction to Metrology and Portable CMMs Tarpon B
9:00 AM 3:00 PM Training Sponsored by ECM: CMS Certification Walu
9:15 AM 11:45 AM Training Sponsored by Verisurf:CNC CMM Programming Veiltail
9:30 AM 10:00 AM
Presentation: Noise Filtration of 3D Scanned Data Points in Metrology of Highly Reflective Surfaces
Speaker: Ahmad Barari, University of Ontario Institute of Technology
Oceans 9–12
9:30 AM 11:30 AM Training Sponsored by NRK: What’s New in SpatialAnalyzer Nomeus
10:00 AM 10:30 AMPresentation: Using an Abbreviated Scale Bar
for Abbreviated TestsSpeaker: Vincent Lee, NIST
Oceans 9–12
10:00 AM 12:00 PM PrecisionPath Consortium (By Invitation) Palani B
10:30 AM 11:00 AM
Presentation: Point Density and Fitting Algorithm Interaction in Part Profile Scanning
Speaker: Edward Morse, UNCC Center for Precision Metrology
Oceans 9–12
WEDNESDAY July 24, 2019 CMSC Agenda
General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only
TimeActivity Location
Start End
11:00 AM 11:30 AMPresentation: Developing Low Cost Large Volume
Metrology for Next-Generation Manufacturing SpacesSpeaker: Stuart Robson, University College London
Oceans 9–12
11:30 AM 12:00 PM
Presentation: Tracker Kinematics and Uncertainty Using Quaternions
Speaker: John W Dorsey Palmateer, JDP Metrology Consulting LLC
Oceans 9–12
12:00 PM 1:30 PM Lunch Co-sponsored by Bal-tec Crystal D&E
12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8
1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Leica Oceans 1–8
1:00 PM 3:00 PM Training Sponsored by NRK: SpatialAnalyzer Measurement Plans Nomeus
1:00 PM 4:00 PMTraining Sponsored by FARO: RPM– Roller Alignment
Techniques Using Laser TrackersTarpon B
1:00 PM 5:00 PM
CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing
Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing
Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS
to take the Level 1 Exam.
Coral B&C
1:30 PM 2:00 PM EZ - Spotlight On New Technology: Hexagon, Aicon Oceans 1–8
1:30 PM 3:30 PM Training Sponsored by 3D Systems: Geomagic Control X Tarpon A
1:30 PM 4:00 PM Training Sponsored by Verisurf: Ask the Engineer Veiltail
2:00 PM 3:00 PM Women in Metrology Networking Session Palani A
2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8
3:00 PM 3:30 PM EZ - Spotlight On New Technology: FARO Oceans 1–8
3:30 PM 4:30 PM EZ - Ask The Experts: The Future of Metrology Oceans 1–8
4:15 PM 5:15 PMWomen in Metrology and STEM
Special Guest Dr. Bonnie DunbarPalani A
4:30 PM 5:30 PM EZ - Final Jeopardy Oceans 1–8
5:30 PM 6:30 PM Happy Hour Sponsored by NRK Oceans Foyer
6:30 PM 9:30 PMCMSC Banquet Co-Sponsored by GSI
Featured Speaker: Dr. Bonnie DunbarOceans 9–12
THURSDAY July 25, 2019 CMSC Agenda
General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only
TimeActivity Location
Start End6:30 AM 8:30 AM Breakfast Crystal D&E
8:00 AM 4:00 PM Registration Open Oceans Foyer
8:00 AM 8:15 AM Conference Updates: Scott Sandwith Oceans 9–12
8:00 AM 12:00 PM
CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing
Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing
Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS
to take the Level 1 Exam.
Coral B&C
8:30 AM 9:00 AMPresentation: Uncertainty Evaluation of Fringe Projection
Based on Linear Systems TheorySpeaker: George Gayton, University of Nottingham
Oceans 9–12
9:00 AM 9:30 AM
Presentation: Computational Challenges for Shop-Floor Laser Radar Commissioning
Speaker: Alexander Schoenberg, FFT - Sensor Technology
Oceans 9–12
9:15 AM 11:45 AM Training Sponsored by Verisurf: Ask the Engineer Veiltail
9:30 AM 10:00 AM
Presentation: Using Coordinate Measurement Machines To Shorten Time To Market For Aerospace Engine
ComponentsSpeaker: David Wick, Zeiss
Oceans 9–12
10:00 AM 10:30 AM
Presentation: Dynamic 3D Measurement of a Deployable Gossamer Antenna Structure Via Multi-Camera
Photogrammetry in Zero GravitySpeaker: Russell Morrison, Geodetic Systems Inc.
Oceans 9–12
10:30 AM 11:00 AMPresentation: Towards Right-Sized Limits: Rationalizing
Build TolerancesSpeaker: Robb Flynn, Electroimpact
Oceans 9–12
11:00 AM 11:30 AM
Presentation: Automated Photogrammetry Robot Calibration and Contour Compensation for Accurate
Cutting OperationsSpeaker: Joe Sabol, Newport News Shipbuilding
Oceans 9–12
TimeActivity Location
Start End
11:00 AM 11:30 AMPresentation: Developing Low Cost Large Volume
Metrology for Next-Generation Manufacturing SpacesSpeaker: Stuart Robson, University College London
Oceans 9–12
11:30 AM 12:00 PM
Presentation: Tracker Kinematics and Uncertainty Using Quaternions
Speaker: John W Dorsey Palmateer, JDP Metrology Consulting LLC
Oceans 9–12
12:00 PM 1:30 PM Lunch Co-sponsored by Bal-tec Crystal D&E
12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8
1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Leica Oceans 1–8
1:00 PM 3:00 PM Training Sponsored by NRK: SpatialAnalyzer Measurement Plans Nomeus
1:00 PM 4:00 PMTraining Sponsored by FARO: RPM– Roller Alignment
Techniques Using Laser TrackersTarpon B
1:00 PM 5:00 PM
CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing
Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing
Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS
to take the Level 1 Exam.
Coral B&C
1:30 PM 2:00 PM EZ - Spotlight On New Technology: Hexagon, Aicon Oceans 1–8
1:30 PM 3:30 PM Training Sponsored by 3D Systems: Geomagic Control X Tarpon A
1:30 PM 4:00 PM Training Sponsored by Verisurf: Ask the Engineer Veiltail
2:00 PM 3:00 PM Women in Metrology Networking Session Palani A
2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8
3:00 PM 3:30 PM EZ - Spotlight On New Technology: FARO Oceans 1–8
3:30 PM 4:30 PM EZ - Ask The Experts: The Future of Metrology Oceans 1–8
4:15 PM 5:15 PMWomen in Metrology and STEM
Special Guest Dr. Bonnie DunbarPalani A
4:30 PM 5:30 PM EZ - Final Jeopardy Oceans 1–8
5:30 PM 6:30 PM Happy Hour Sponsored by NRK Oceans Foyer
6:30 PM 9:30 PMCMSC Banquet Co-Sponsored by GSI
Featured Speaker: Dr. Bonnie DunbarOceans 9–12
THURSDAY July 25, 2019 CMSC Agenda
General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only
TimeActivity Location
Start End
11:30 AM 12:00 PMPresentation: How to Get the Most Accuracy
Out of Your PCMMSpeaker: Aleksandr Bakhtin, Wagstaff Inc
Oceans 9–12
12:00 PM 1:30 PM Lunch Co-Sponsored by GSI Crystal D&E
12:00 PM 12:30 PM
Presentation: Multilateration with Laser Tracker Applied in Large Scale Coordinate Verification
Speaker: Yu Ren, Shanghai Institute of Measurement and Testing Technology
Oceans 9–12
12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8
1:00 PM 5:00 PM
CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing
Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing
Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS
to take the Level 1 Exam.
Coral B&C
1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Romer Oceans 1–8
1:30 PM 2:30 PM EZ - Ask The Experts: Metrology Principles Oceans 1–8
1:30 PM 4:00 PM Training Sponsored by Verisurf: Large-Scale Metrology Veiltail
2:30 PM 3:30 PM EZ - Special Presentation: Ben Hughes, NPL Oceans 1–8
4:00 PM 5:00 PMCMS All-Member & Exhibitor Happy Hour
and Feedback SessionOceans 1–8
5:30 PM 9:00 PM Exhibition Hall Teardown Oceans 1–8
FRIDAY JULY 26, 2019 CMSC Agenda
General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only
TimeActivity Location
Start End
7:15 AM 4:00 PMKennedy Space Center Tour
Bus to and From Kennedy Space Center
Meet at Oceans Porte-Cochere