ERS Logic SystemRoller Conveyors

ERS Logic SystemBelt Conveyors

EBS SystemBelt Conveyors

ETS SystemFlat Top Conveyors

EMBS SystemFlat Top Conveyors

EMCS SystemFlat Top Conveyors

CONVEYORMODULES & COMPONENTS

THE LOGICAL WAY...OF SOLVING YOUR MATERIAL HANDLING NEEDS

BY SUppLING YOUpLUG AND pLAY MODULES & COMpONENTS

Step 1 Go to www.easy-conveyors.com.au Go to product range and click on the EASY CAD buttonStep 2 Go to Product & CAD and choose your type of conveyorStep 3 Choose your type of conveyorStep 4 Choose your modelStep 5 Choose your cad format and configure your conveyorStep 6 Click right below on CAD file or Data sheet, in a few seconds your CAD drawing or datasheet will be ready at the left side for downloading.Step 7 Download your 3D drawing of your designed conveyor

2 3

5 6

1

4

7

Configure your conveyor online:www.easy-conveyors.com.au

MATERIALS HANDLING l CONVEYORS l COMPONENTS

Easy Conveyors bvWith over 25 years of manufacturing experience, Easy Conveyors specialize in the design and development of modular components for the production of Belt conveyors, Flat Top conveyors and Roller conveyors, all products are designed and developed using “modular” engineering technologies and specialized in the markets of Warehousing, pick and place and Logistics for system integrators and material handling compa-nies.

Quality with innovative solutionsAt Easy Conveyors we believe in delivering precision products, there is no compromise in the quality of our products and services. We make it Easy Conveyors business to understand your needs and requirements, this understanding ensures our commitment to research and deve-lopment in seeking technological advances enabling your business to maintain a competitive advantage while delivering customer value and maximum flexibility in material handling logistics.

Today’s dynamic environment requires businesses constantly evolve with new technologies and customer requirements. With this in mind, Easy Conveyors Modules & Components are designed and manufactu-red to maximize your investment and optimize the unlimited potential of your business.

Business Efficiency All businesses depend on their bottom line results, bottom line effici-ency and total cost of ownership and return on investment are Easy Conveyors priorities, we continuously set and raise the benchmark to meet the requirements and budgets of a broad sector of industries.

We work toward optimizing results for businesses with cost-efficient systems that provide you with…01 Fast layout capability 05 Enhanced productivity02 Minimal component variation 06 Low maintenance03 Design simplicity 07 User-friendliness04 Effective space utilization

Strategic partners Easy Conveyors are available worldwide through a network of Strategic Partners (System integrators and material hand-ling companies) our partners have the engineering resources and expertise to provide complete systems and integration solutions.

Easy Conveyors Modules & Components are distributed from our major stocking facilities in Europe, North America, Aus-tralia and Asia, this inventory commitment ensures efficient shipment of your orders.

Online ConfiguratorEasy Conveyors online configurator allows you to configure your specific conveyor online by answering a few ques-tions. The configurator generates your conveyor which you can download in the CAD file format selected.

TRY OUT ON OUR WEBSITEwww.easy-conveyors.com.au

ERS ROLLER CONVEYORS

ERS 50 Gravity ConveyorsERS Gravity Conveyors convey product manu-ally or via gravity decline, completing integra-ted systems applications, assembly, picking lines and dynamic storage systems.

ERS 51 RollerDrive ConveyorsERS 51 24V RollerDrive Conveyors are trans-port, accumulation or zero pressure accumu-lation conveyors, each drive features a digitalinterface to an external PLC control protecting the RollerDrive from overload, each Roller-Drive, drives a series of slave rollers via PU Round belts or PolyVee drive belts, RollerDrive systems are extremely quiet 65dB (A) ideal for noise sensitive environments.

ERS 52 Smart ConveyorsERS 52 24V Smart conveyors are zone control-led zero pressure accumulation conveyors, self-contained they requiring no additional controls, on demand conveying reduces energy consumption, individual drive zones operate according to the status of adjacent zones automatically, each 24V RollerDrive, drives a series of slave rollers via PU Round belts or PolyVee drive belts, Smart Conveyors are ex-tremely quiet 65dB (A) ideal for noise sensitive environments.

ERS 53 Belt Drive Roller ConveyorsERS 53 Roller Conveyors use flange mounted gear-motors 230/460/575V, a single gear-motor drives multiple straight conveyor sections, belt drives are ideal for conveying heavy loads, belt tracking and tensioning are automatic, belt drive system are extremely quiet 65dB (A) ideal for noise sensitive environments.

ERS Roller Conveyors are used for conveying a wide variety of light to heavy products, tote’s, trays, pails, corrugated shipping cases are some examples.

ERS Logic Conveyors meet today’s global demand for smart conveying, Logic modular technologies enhance conveyor design, installation and commissioning. Each section of the conveyor system is modular, so future line expansion and operational changes are accommodated using pre-engineered Logic modules.

Standard Widths 420 / 520 / 620 / 820 mm

ERS DivertersERS diverters, divert conveyed product and maintains product orientation in the direction of travel using pivoted rollers, the production flow remains uninterrupted.

Up to 1.500 products / hour.

ERS High Speed DiverterUp to 6.000 products / hour.

ERS High Speed popupERS HS pop-up, divert conveyed product and maintains product orientation in the direction of travel using pivoted rollers, the production flow remains uninterrupted.

Up to 4.500 products / hour.

ERS TransferERS 90°Transfers, lift and transfer product from a straight section of conveyor at right angles to a second or third position, they are available with pneumatic or electromechani-cal options.

Up to 4.500 products / hour.

EASY CONVEYORS SOLUTION FOR MARKETS OFWAREHOUSING, PICK AND PLACE AND LOGISTICS

FOR SYSTEM INTEGRATORSAND MATERIAL HANDLING COMPANIES

BENEFITS• Versatility to meet any application requirements• Cost reduction• Low-noise and maintenance-free operation• High availability and reliability• Ease of maintenance

powerful and extremely low-noise conveying

The belt conveyor stands out for careful and extremely low-noise conveying of totes and cartons. It can be combined with either a head drive or a central drive depending on its length. The belt conveyor with central drive is used for long conveying distances, its timing belt transmission enables a very quiet and low-maintenance operation. The belt con-veyor with head drive is especially used for short conveying distances, it is also equipped with timing belt transmission. Both versions of the belt conveyor can cope with inclines of up to 22,5°. It is capable of conveying even the smallest goods/products.

Ready for installation and use with pre-assambled modules.

ERS70 ROLLER CONVEYORS

ERS 70-type 1General technical data: Gear motor version | Max. load capacity per module 250 kg. | Conveyor speed Max. 1,75 m/s. | Max. electrical power per zone 1,1 kW | General technical data: Drum motor version | Max. load capacity per module 120 kg. | Conveyor speed Max. 1,0 m/s. | Max. electrical power per zone 0,12 kW | Valid for both: Incline/decline | Max. 10 degrees. | Rated voltage 400V/50Hz/3 Phase. | Conveyor surface 2 layer PVC, longitudinally grooved for incline/decline on wooden slider bed

ERS 70-type 2General technical data: Max. load capacity per module 600 kg. | Conveyor speed Max. 2,6 m/s. | Max. electrical power per zone 1,2 kW | Incline/decline Max. 24 degrees.Rated voltage 400V/50Hz/3 Phase. | Conveyor surface 2 layer PVC, longitudinally grooved for incline/decline onwooden slider bed

ERS 70-type 3General technical data: Max. load capacity per module 600 kg. | Conveyor speed Max. 2,6 m/s. | Max. electri-cal power per zone 1,2 kW | Incline/decline Max. 22,5 degrees. | Rated voltage 400V/50Hz/3 Phase. | Conveyor surface 2 layer PVC, longitudinally grooved for incline/decline on wooden slider bed

ERS 70-type 4General technical data: Max. load capacity per module 600 kg. | Conveyor speed Max. 2,6 m/s. | Max. electri-cal power per zone 1,2 kW | Incline/decline Max. 22,5 degrees. | Rated voltage 400V/50Hz/3 Phase. | Conveyor surface 2 layer PVC, longitudinally grooved for incline/decline on wooden slider bed

ERS 70-type 5General technical data: Max. load capacity per module 600 kg. | Conveyor speed Max. 2,6 m/s. | Max. electri-cal power per zone 1,2 kW | Incline/decline Max. 22,5 degrees. | Rated voltage 400V/50Hz/3 Phase. | Conveyor surface 2 layer PVC, longitudinally grooved for incline/decline on wooden slider bed

Note:Max. Load capacityis depending on the combination of speed & Load.

ML

SP

D.O.T

LW

TW

120

,5

ML

335

213

D.O.T.

LW

LW

-60

TW

SP

213

AL

A(-x-)

CL

335

a

D.O.T.

TW

LW

LW

-60

SP

F(-x-)

334

213

FL

CL SP

a

D.O.T.

LW

-60

LW

TW

FL

CL

AL

213

334

ML

F(-x-)

A(-x-)

a

D.O.T.

LW

LW

-60

TW

S

P

EASY CONVEYORS SOLUTION FOR MARKETS OFWAREHOUSING, PICK AND PLACE AND LOGISTICS

FOR SYSTEM INTEGRATORSAND MATERIAL HANDLING COMPANIES

EBSBelt Conveyors

Our product range is based on the modular building principle.

Because of this modular building principle, our systems are com-patible and the same components can be used in all our types of conveyor systems . Because of this we are able to create the highest quality, flexibility and the best conditions.

The 2 series:• EBS 40 The aluminium conveyor EBS 40 series offers 15 mm and 45 mm

return rollers in different configurations. Those belt conveyors are suitable for high maximum load capa-

city , makes this range very versatile for many applications.• EBS 80 The aluminium conveyor EBS 80 series is the realheavy-

weight of the range. With a large maximum load capacity, widths up to 1200 mm and a maximum length of 11200 mm, this is the belt conveyor for heavy duty requirements.

EBS 40 direct drive with 45 mm idler

EBS 80 direct drive with 85 mm idler

EBS 40 drum drive with 45 mm idler

EBS 80 transmission drive with 85 mm idler

EBS 40 transmission drive with 15 mm knife edge

ETSFlat Top Conveyors

Conveyor with custom madesupports and side guiding.

ETS Connection Drive

ETS Center Drive

ETS Head Drive

The conveyors can be supplied in aluminium or stainless steel versions. An perfect fitting multi flex plastic chain allows the system straight, horizontal and vertical running capability.

Because of this flexibility ,space saving abilities and economic use is guaranteed. The chain range is from 80 up to 200 mm wide and for product widths up to 400 mm.

Aluminium systemThis conveyor system based on Aluminium profiles uses a plastic chain that permits horizontal as well as vertical change of direction. In addition to the standard types, bespoke chain links are available on request. The standard widths are 80, 140 and 200 mm.

Stainless Steel System (Hygienic conveyor design)The Stainless steel conveyor series is a conveyor which is adapted to the requirements of the food processing, pharma-ceutical and hygiene industries.

Aluminium system and Stainless steel system

EMBSFlat Top Conveyors

Our product range is based on the modular building principle. Be-cause of this modular building principle, our systems are compatible and the same components can be used in all our types of conveyor systems.

The conveyors can be supplied in aluminium or stainless steel versions. An perfect fitting multi flex plastic chain allows the system straight, horizontal and vertical running capability. Because of this flexibility, space saving abilities, economic use is guaranteed. The chain range is from 255 up to 510 mm wide and for product widths up to 700 mm.

Aluminium systemThis conveyor system based on Aluminium profiles uses a plastic chain that permits horizontal as well as vertical change of directi-on. In addition to the standard types, several special purpose chain links are available on request. The standard widths are 255, 340, 425 and 510 mm.

Stainless Steel System(Hygienic conveyor design)The Stainless steel conveyor Series is a conveyor which is adapted to the requirements of the food processing, pharma-ceutical and hygiene industries.

Easy de-assembling everywhere in the conveyor.

Aluminium system Stainless steel system

Conveyor with custom made supports and side guiding.

EMBS Connection Drive

EMBS Center Drive

EMBS Head Drive

EMCSStraight Flat Top Conveyors

Our product range is based on the modular building principle. Because of this modular building principle, our systems are com-patible and the same components can be used in all our types of conveyor systems. Because of this we are able to create the highest quality, flexibility and the best conditions.

Our EMCS series is a modular straight running mat top conveyor system. It is used in all kind of sectors like Food, filling, packaging, logistic, mechanical, agricultural, clean fruits,electronics industries etc.The chain width is 85 mm until 2550 mm this with extension steps of 85 mm.

The standard sizes are;170 - 255 - 340 - 425 - 510 - 680 - 850 mm

Technical characteristics EMCS seriesConveyor length (L) Individual von 785 -22.000mmFrame wideness (FW) 186, 271, 356, 441, 528, 698, 868mmBelt wideness (BW) 170, 255, 340, 425, 510, 680, 850mmMax load capacity 21.600 N/m Idler

Direct Drive

FLAT TOP FRICTION TOP OPEN TOP

EASY CONVEYORS

TEL: “FREE CALL”

1800 281 003E-mail: info@easy-conveyors.com.au

www.easy-conveyors.com.au

CATALOGUE 2016• Components & Systems

• Conveyor Modules

Visit our websitewww.easy-conveyors.com.au

Download the catalogue FOR FREE

17 Archimedes Street, Darra, Queensland Australia 4076