control hardware design control hardware wiring ioc software (low level) opi software (high level)...
TRANSCRIPT
Control
Hardware
Design
Control
Hardware
Wiring
IOC Software
(Low Level)
OPI Software
(High Level)
Final Test
Front-End (Connection to SR1 Ring) Done Done Done Done Done
Insertion Device Done Done Done 90% 90%
Hutch Safety Lockup System Done Done Done Done 90%
Vacuum & Machine Protection Done Done Done Done Done
Motor Control Done Done Done 75% 75%
Crystal Centering Done To do 75% 75% To do
Marmosaic 225 CCD Detector Done Done 50% 50% To do
Fluorescence Detector (MCA) Done To Do Done 90% To do
SESO X-RAY BPM To do To do Done 90% To do
Regular BPM Done 75 % Done To do To do
Integration of shutter Done To do To do To do To do
D-MOSTAB and BPM Done 75 % 20 % To do To do
Automounter 50% To do To do To do To do
High Level Experiment Control - - 20% 20 % To do
Control System Status (04-11-10)
• MCA and SESO XBPM will initially use vendor supplied software.
• Work on the MAR detector interface software is now limited by physical installation of the detector.
• Low level motor control work is now limited on the delivery of the end-station
• Deployment of control hardware and software is currently consistent with physical installation of the beamline equipment.
Control System Status (04-11-10) - Footnotes
VLANs for: each beamline, machine control, development, office, visitors
VME Crate
(Reflective Memory)
MicroStep
EROCIOC
RTEMS
FieldDev. RS-232
Devices
OPI
Linux
IOCStep Controller
RTEMS
Motors
MicroStep
OPI
Linux
OPI
Linux
Touch PanelOPI Linux
NetworkServer
(bootp, dhcp,auto restore)
Linux
DataArchiveServer
Linux
AlarmServer
MS-Win
MS-SQLServer
MS-Win
PowerEdgeIOC
Linux
EROCIOC
RTEMS
DetectorIOC
Linux
FieldDev.
EthernetDevices
PLC & GPIB
FieldDev.
Motors
1GigBridge
System Architecture
Design Features
• Accelerator and Beamline Systems based on EPICS and RTEMS.
• Independent VLAN for each bend magnet beamline or ID-pair.
• Central common servers provide network services, data achieving and storage.
• Gateways provide read-access all machine parameters and control over insertion devices.
• Interfaces to central alarm management, work management and inventory control systems are being developed.
Example Beamline Front-End Control Screen
Example Beamline Control Screen
Hutch Control Screen
Data Collection Control Screen
Data Scan Screen
User Control Screen