contractor cpr series

ContractorCPR series

NEW PRODUCTS 2019

CPRCOMPLIANT

EN 50575

Construction Products Regulation

CONSTRUCTION PRODUCT REGULATION CERTIFIED (CPR)

As a manufacturer of professional cabling we feel responsible to provide cabling you can rely on every day.

That’s why we chose to offer CPR certified cabling with maximum fire safety. In case of a fire, most casualties are a result of the toxic smokes.

By providing cabling which nearly eliminates toxic smokes and in addition ceases the fire from spreading, we hope to contribute to a safer future.

Procab, Your CPR certified partner.

What is CPR?

The Construction Products Regulation (CPR) is an EU regulation for installation cables, classifying cables based on their fire performance. It is aimed to improve the fire safety in buildings.

Why CPR?

In case of a fire, the biggest danger is the toxic smoke. Since buildings are filled with cabling, the risk of spreading fire is very big. To improve the overall fire safety, the installed cables have to be within a certain standard, the new CPR cabling will resist the spreading of fire while minimizing toxic gasses released.

Goals of CPR

The construction product regulation has three main goals:

- Guarantee higher safety levels for fire and dangerous substances - Ensure harmonization across the European union - Provide greater clarity and traceability

What are the responsibilities of the manufacturer?

After the initial test to determine which CPR class corresponds with the cables fire performance, the manufacturer is required to consistently carry out follow-up tests by the Notifying Laboratory.

The manufacturer is obligated to provide a Declaration of Performance for all available cables wherein all information regarding the manufacturer, cable identification, applicable standard, certifying organism and CPR performance can be found.

Highest performancelevels against fire

Lowest performancelevels against fire

2

CPRCOMPLIANT

EN 50575

Construction Products Regulation

Which CPR class cable do I need for my project?

The CPR cable standards are harmonized throughout Europe. However, Every country makes it’s own regulations regarding which CPR class cabling has to be used in different types of buildings. To know which CPR class cabling you need, please check your local norms.

What do the different classes mean?

Although CPR classes range from Aca to Fca, in reality very few cables will reach the Aca and B1ca standards. In reality only cabling from classes B2ca, Cca, Dca and Eca will be used in buildings. With B2ca being the highest class, providing the best fire performance, and Eca being the lowest class providing limited fire performance.

Additional levels of classification:

› s: The amount of smoke emitted

› d: flaming droplets and particles

› a: acidity of the smoke

Euroclasses are classes of CPR cabling, every class has it’s specific requirements by which the cabling needs to be tested. The Euroclass table shows every class with its specific properties regarding the fire performance.

3

Aca

B1ca

B2ca

Cca

Dca

Eca

Fca

Unburnable cable

Cabling with improved fire performance

Standard cabling

Undetermined cabling

It’s unlikely many cables will meet class Aca

Smoke production (s1, s2, s3) EN 50399/EN 61034-2 Flaming droplets (d0, d1, d2) EN 50267-2-3 Acidity (a1, a2, a3) EN 50399

-

-

None

Minimal

Very limited

Limited

Average

High

Undetermined

Cable Additional classification

Contribution to fire

Euro class Classification criteria

EN ISO 1716 Gross heat of combustion

EN 50399 Heat release Flame spread EN 60332-1-2 Flame propagation

EN 60332-1-2 Flame propagation

-

SMOKE CONCENTRATIONThese classes of smoke production clarify the amount of smoke released in case of fire.

› s1: very little smoke production

› s1a: s1 with visibility over 80%

› s1b: s1 with visibility ranging from 60% to 80%

› s2: intermediate smoke production

› s3: Neither s1 or s2

BURNING DROPLETSThese classes indicate the amount of burning droplets.

› d0: no falling droplets

› d1: burning droplets persist less than 10ms

› d2: neither d0 or d1

ACIDITY OF THE SMOKEThese classes indicate the amount of acidity in the smoke.

› a1: Low acidity (UNE-EN 60754-2 conductivity

<2,5ms/mm y pH > 4.3)

› a2: Intermediate values of acid (UNE-EN

60754-2 conductivity <10 ms/mm y pH > 4.3)

› a3: neither a1 or a2

4

3 TYPES OF ADDITIONAL CRITERIA

DECLARATION OF PERFORMANCEThe declaration of performance is an important document, providing all necessary information regarding the fire performance of the cable. All construction products according to a European standard need this declaration accompanied by a CE mark. This way transparency between the manufacturer, distributor and installer is increased.

It contains the manufacturer, identification of the cable, the evaluation system, applicable standard, the certifying body and the CPR class.

5

AVAILABLE LENGTHS100 m : CLS215-B2CA/1 300 m : CLS215-B2CA/3

The CLS215-B2ca series are 2-core installation loudspeaker cables compliant to the B2ca standards of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to it’s outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The CLS2xx series consists of three models with individually polyolefin isolated conductors in sections ranging from 1.5 mm² (16 AWG) up to 4 mm² (11 AWG) which are composed of stranded bare copper wires. The stranding keeps the cable flexible and easy to handle. The cable can be used in both indoor and outdoor or in humid environments.

CLS215-B2CA CONTRACTOR LOUDSPEAKER CABLE

Meter indicator

CPR

B2CALSHF

LSHF

ELECTRICAL SPECIFICATIONSMax. conductor DC resistance 13.3 (Ohm/Km)

Dielectric strength 2 (KV / 1 min. DC)

Voltage rating 500V

CROSS SECTION HIGHLIGHTS INNER CONDUCTOR

• EN50399 CPR Euroclass B2ca-s1b,d0,a1 • 16 AWG (1.5 mm²) thin and dense stranded conductors • Class 5 IEC 60228 compliant

Type of cable 2-core loudspeaker cable

Inner conductor BC 28 x 0.25 mm (Ø) (OFC)

Inner conductor section 1.5 mm2

American Wire Gauge 16 AWG

Insulation Ø 3.1 mm Polyolefin

Insulation color Red / Blue

Number of conductors 2

Conductor twisting Yes

Filling None

Separator None

Outer jacket Polyolefin

Outer jacket diameter Ø 9 mm

Outer jacket color Black

Smoke concentration s1b: s1 with visibility ranging from 60% to 80%

Burning droplets d0: no falling droplets

Acidity of the smoke a1: Low acidity (UNE-EN 60754-2)

6

AVAILABLE LENGTHS100 m : CLS215-CCA/1 300 m : CLS215-CCA/3

The CLS215-Cca series are 2-core installation loudspeaker cables compliant to the Cca standards of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its Improved fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The CLS2xx series consists of three models with individually polyolefin isolated conductors in sections ranging from 1.5 mm² (16 AWG) up to 4 mm² (11 AWG) which are composed of stranded bare copper wires. The stranding keeps the cable flexible and easy to handle. The cable can be used in both indoor and outdoor or in humid environments.

CLS215-CCA CONTRACTOR LOUDSPEAKER CABLE









Filling None

Separator None


Outer jacket diameter Ø 7 mm





CPR

CCA

Meter indicatorLSHF

LSHF



Voltage rating 500V


• EN50399 CPR Euroclass Cca-s1b,d0,a1 • 16 AWG (1.5 mm²) thin and dense stranded conductors • Class 5 IEC 60228 compliant

7











Filling None

Separator None


Outer jacket diameter Ø 9.6 mm





Meter indicator

CPR

B2CALSHF

LSHF



Voltage rating 500V


• EN50399 CPR Euroclass B2ca-s1b,d0,a1 • 13 AWG (2.5 mm²) thin and dense stranded conductors • Class 5 IEC 60228 compliant

The CLS225-B2ca series are 2-core installation loudspeaker cables compliant to the B2ca standards of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to it’s outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The stranding keeps the cable flexible and easy to handle. The cable can be used in both indoor and outdoor or in humid environments.

8











Filling None

Separator None







CPR

CCA

Meter indicatorLSHF

LSHF



Voltage rating 500V


• EN50399 CPR Euroclass Cca-s1b,d0,a1 • 13 AWG (2.5 mm²) thin and dense stranded conductors • Class 5 IEC 60228 compliant

The CLS225-Cca series are 2-core installation loudspeaker cables compliant to the Cca standards of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to it’s outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The stranding keeps the cable flexible and easy to handle. The cable can be used in both indoor and outdoor or in humid environments.

9





Inner conductor section 4 mm2






Filling None

Separator None









Voltage rating 500V


• EN50399 CPR Euroclass B2ca-s1b,d0,a1 • 11 AWG (4 mm²) thin and dense stranded conductors • Class 5 IEC 60228 compliant

Meter indicator

CPR

B2CA

The CLS240-B2ca series are 2-core installation loudspeaker cables compliant to the B2ca standards of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to it’s outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The stranding keeps the cable flexible and easy to handle. The cable can be used in both indoor and outdoor or in humid environments.

LSHFLSHF

10











Filling None

Separator None









Voltage rating 500V


• EN50399 CPR Euroclass Cca-s1b,d0,a1 • 11 AWG (4 mm²) thin and dense stranded conductors • Class 5 IEC 60228 compliant

Meter indicatorLSHF

LSHF

CPR

CCA

The CLS240-Cca series are 2-core installation loudspeaker cables compliant to the Cca standards of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to it’s outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The stranding keeps the cable flexible and easy to handle. The cable can be used in both indoor and outdoor or in humid environments.

11

AVAILABLE LENGTHS300 m : CLS440-CCA/3

The CLS440-Cca is a 4-core installation loudspeaker cable compliant to the Cca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consist of individually polyolefin isolated conductors with a section of 4 x 4.0 mm² (11 AWG) which are composed out of stranded bare copper wires. The stranding keeps the cable flexible and easy to handle. The cable can be used both indoor and outdoor or in humid environments.







Insulation color Black, Red, Blue, Yellow



Filling None

Separator None









Voltage rating 500V



Meter indicatorLSHF

LSHF

CPR

CCA

12

AVAILABLE LENGTHS300 m : CLS840-CCA/3

The CLS840-Cca is an 8-core installation loudspeaker cable compliant to the Cca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consist of individually polyolefin isolated conductors with a section of 8 x 4.0 mm² (11 AWG) which are composed out of stranded bare copper wires. The stranding keeps the cable flexible and easy to handle. The cable can be used both indoor and outdoor or in humid environments.







Insulation color Red, Black, Blue, Yellow, Green, Grey, Orange, White



Filling None

Separator None









Voltage rating 500V



Meter indicatorLSHF

LSHF

CPR

CCA

13

CMC224-CCA CONTRACTOR MICROPHONE CABLE

ELECTRICAL SPECIFICATIONSMax. conductor DC resistance 85 (Ohm/Km)


Voltage rating 100V

AVAILABLE: Q2 2019

AVAILABLE LENGTHS100 m : CMC224-CCA/1 300 m : CMC224-CCA/3

Type of cable 24 AWG Microphone cable


Inner conductor section 0.20 mm²



Insulation color White / Red



Shielding Al-foil + drain wire







The CMC224-Cca is a high quality installation microphone cable compliant to the Cca standards of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its improved fire properties, the outer jacket of the cabling is smooth and durable for easy installation and pulling. It consists of stranded conductors with an aluminum foil shielding and drain wire, which guarantees a high installers convenience. The highly effective shielding guarantees an excellent immunity against noise and interference caused by external devices. The stranding keeps the cable flexible and easy to handle. The cable can be used both indoor and outdoor.

• EN50399 CPR Euroclass Cca-s1b,d0,a1 • 24 AWG (0.20 mm²) thin and dense stranded conductors • Aluminum shielded conductors with drain wire

HIGHLIGHTSMeter indicator

LSHFLSHF

14

SHIELDING

INNER CONDUCTOR

INSTALL

CROSS SECTION

FOILaluminum

drain wire

tinned copper

CPR

CCA

ELECTRICAL SPECIFICATIONSMax. Delay / Skew <25ns / 100m

Rated voltage 300 V

Nom. Velocity of propagation 76%

Characteristic impedance 100 Ω ± 15 Ω

Max. conductor DC resistance 7.9 Ω / 100m

Max. conductor DC resistance unbalanced < 2%

Nom. mutual capacitance 5,6µF/100m

Pair to ground capacitance unbalance Max Capacitance < 160pF/100m

Pair to ground capacitance unbalance < 330pF/100m

CCT70S-CCA CONTRACTOR CAT7 S/FTP CABLE

AVAILABLE LENGTHS305 m : CCT70S-CCA/3

SHIELDING

FOILaluminum

Type of cable S/FTP CAT7 Networking cable


Inner conductor section 0,25 mm²


Insulation Foamed PE

Insulation color Green / White & Green ; Blue / White & Blue ; Orange / White & Orange ; Brown / White & Brown

Number of conductors 8 (4 pairs)

Shielding Al-mylar, 100% coverage – 25% overlap

Overall shielding TC 10 x 8 x 0.08 mm (Ø) (OFC) - braid

Seperator None

Outer jacket LSZH


Smoke concentration s1a: s1 with visibility over 80%

Burning droplets d1: burning droplets persist less than 10ms


LSHFLSHF

• EN50399 CPR Euroclass Cca-s1a,d1,a1 • 600 Mhz performance, up to 10GBase-T • IEC 60332-1 NHFR compliant • Al-foil individual & braided overall shielding • Reference standard: UL Subject 444, TIA/EIA 568B.2 & ISO / IEC 11801, IEC 61156-5

CROSS SECTION HIGHLIGHTS INNER CONDUCTORMeter indicator

The CCT70S-Cca is a CAT7 installation networking cable compliant to the Cca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consists of 4 individually shielded twisted pair cables with solid 23 AWG conductors, overall braided shielding is provided to reduce crosstalk and system noise to a minimum resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. Providing an optimized solution for 100Base-T, 1000Base-TX and 10GBase-T gigabit networks.

INSTALL

15

600 MHz

CAT7CPR

CCA

CCT65F-B2CA CONTRACTOR CAT6A U/FTP CABLE

Type of cable U/FTP CAT6A Networking cable









Outer jacket LSZH





The CCT65F-B2ca is a CAT6A installation networking cable compliant to the B2ca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consists of 4 individually shielded twisted pair cables with solid 23 AWG conductors. This way, crosstalk and system noise is reduced to a minimum, resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. Providing an optimized solution for 100Base-T, 1000Base-TX and 10GBase-T gigabit networks.

• EN50399 CPR Euroclass B2ca-s1a,d1,a1 • 500 Mhz performance, up to 10GBase-T • Reference standard: UL Subject 444,TIA/EIA 568B.2/568C.2 & ISO / IEC 11801, IEC 61156-5 • Aluminum foil individual shielding

CROSS SECTION HIGHLIGHTS

INSTALL

16


Rated voltage 300 V








AVAILABLE LENGTHS305 m : CCT65F-B2CA/3

LSHFLSHFMeter indicator

500 MHz

CAT6A

SHIELDING

FOILaluminum

INNER CONDUCTOR

CPR

B2CA

CCT65F-CCA CONTRACTOR CAT6A U/FTP CABLE










Seperator None

Outer jacket LSZH





The CCT65F-Cca is a CAT6A installation networking cable compliant to the Cca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its Improved fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consists of 4 individually shielded twisted pair cables with solid 23 AWG conductors. This way, crosstalk and system noise is reduced to a minimum, resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. Providing an optimized solution for 100Base-T, 1000Base-TX and 10GBase-T gigabit networks.

• EN50399 CPR Euroclass Cca-s1a,d1,a1 • 500 Mhz performance, up to 10GBase-T • Reference standard: UL Subject 444,TIA/EIA 568B.2/568C.2 & ISO / IEC 11801, IEC 61156-5 • Aluminum foil individual shielding

CROSS SECTION HIGHLIGHTS

INSTALL


Rated voltage 300 V








AVAILABLE LENGTHS305 m : CCT65F-CCA/3

17

LSHFLSHFMeter indicator

500 MHz

CAT6A

SHIELDING

FOILaluminum

INNER CONDUCTOR

CPR

CCA

CCT65F-DCA CONTRACTOR CAT6A U/FTP CABLE










Outer jacket LSZH





The CCT65F-Dca is a CAT6A installation networking cable compliant to the Dca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its Improved fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consists of 4 individually shielded twisted pair cables with solid 23 AWG conductors. This way, crosstalk and system noise is reduced to a minimum, resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. Providing an optimized solution for 100Base-T, 1000Base-TX and 10GBase-T gigabit networks.

• EN50399 CPR Euroclass Dca-s1a,d1,a1 • 500 Mhz performance, up to 10GBase-T • Reference standard: UL Subject 444,TIA/EIA 568B.2/568C.2 & ISO / IEC 11801, IEC 61156-5 • Aluminum foil individual shielding

CROSS SECTION HIGHLIGHTSLSHFLSHFMeter indicator

INSTALL

18


Rated voltage 300 V








AVAILABLE LENGTHS305 m : CCT65F-DCA/3

500 MHz

CAT6A

SHIELDING

FOILaluminum

INNER CONDUCTOR

CPR

DCA

CCT60U-B2CA CONTRACTOR CAT6 U/UTP CABLE

Type of cable U/UTP CAT6 Networking cable








Separator + shaped seperator


Outer jacket LSZH





The CCT60U-B2ca is a CAT6 installation networking cable compliant to the B2ca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its outstanding fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consists of 4 twisted pair cables with solid 23 AWG conductors and a “+” shaped separator. This way, crosstalk and system noise is reduced to a minimum, resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. Providing an optimized solution for 10Base-T, 100Base-TX and 1000Base-T gigabit networks.

• EN50399 CPR Euroclass B2ca-s1a,d1,a1 compliant cable • 250 Mhz performance, up to 1000Base-T • “+” Shaped separator to reduce crosstalk • Reference standard: UL Subject 444,TIA/EIA 568B.2/568C.2 & ISO / IEC 11801, IEC 61156-5


INSTALL


Rated voltage 300 V








AVAILABLE LENGTHS305 m : CCT60U-B2CA/3

250 MHz

CAT6INNER CONDUCTOR

19

CPR

B2CA

CCT60U-CCA CONTRACTOR CAT6 U/UTP CABLE










Outer jacket LSZH





The CCT60U-Cca is a CAT6 installation networking cable compliant to the Cca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its improved fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consists of 4 twisted pair cables with solid 23 AWG conductors and a “+” shaped separator. This way, crosstalk and system noise is reduced to a minimum, resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. Providing an optimized solution for 10Base-T, 100Base-TX and 1000Base-T gigabit networks.

• EN50399 CPR Euroclass Cca-s1a,d1,a1 • 250 Mhz performance, up to 1000Base-T • “+” Shaped separator to reduce crosstalk • Reference standard: UL Subject 444,TIA/EIA 568B.2/568C.2 & ISO / IEC 11801, IEC 61156-5


INSTALL


Rated voltage 300 V








AVAILABLE LENGTHS305 m : CCT60U-CCA/3

250 MHz

CAT6INNER CONDUCTOR

20

CPR

CCA

CCT60U-DCA CONTRACTOR CAT6 U/UTP CABLE










Outer jacket LSZH


Smoke concentration s2: intermediate smoke production


Acidity of the smoke a1: Low acidity (UNE-EN 60754-2 conductivity <2,5ms/mm y pH > 4.3)

The CCT60U-Dca is a CAT6 installation networking cable compliant to the Dca standard of the Construction Product Regulation (CPR) regarding fire and flammability resistance in fixed installations, minimizing toxic smokes and providing optimal resistance to spreading fire. In addition to its improved fire properties the outer jacket of the cabling is smooth and durable for easy installation and pulling. The cable consists of 4 twisted pair cables with solid 23 AWG conductors and a “+” shaped separator. This way, crosstalk and system noise is reduced to a minimum, resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. Providing an optimized solution for 10Base-T, 100Base-TX and 1000Base-T gigabit networks.

• EN50399 CPR Euroclass Dca-s2,d1,a1 • 250 Mhz performance, up to 1000Base-T • “+” Shaped separator to reduce crosstalk • Reference standard: UL Subject 444,TIA/EIA 568B.2/568C.2 & ISO / IEC 11801, IEC 61156-5


INSTALL


Rated voltage 300 V








AVAILABLE LENGTHS305 m : CCT60U-DCA/3

250 MHz

CAT6INNER CONDUCTOR

21

CPR

DCA

This brochure is made with care and attention for details and is as complete as possible on publication date. Due to the fact our products, documentation and products range are continuously improved and expanded, updates may have occurred since publication date.

To be always up to date with the latest improvements and additions or to obtain additional product information, please visit the product page on our website procab.be

23

CCT60U-B2CA 19

CCT60U-CCA 20

CCT60U-DCA 21

CCT65F-B2CA 16

CCT65F-CCA 17

CCT65F-DCA 18

CCT70S-CCA 15

CLS215-B2CA 6

CLS215-CCA 7

CLS225-B2CA 8

CLS225-CCA 9

CLS240-B2CA 10

CLS240-CCA 11

CLS440-CCA 12

CLS840-CCA 13

CMC224-CCA 14

INDEX

procab.be

AUDIO VIDEO DIGITAL POWER

contractor cpr series

Documents