Contour TRL™ with MicroLaserPeel®

& ProFractional™ TherapyComplete Resurfacing Solutions from Sciton

Laser resurfacing has emerged as the most effective way to treat a wide variety of skin conditions. Resurfacing eliminates old, damaged skin, which is replaced with fresh, healthy skin. Some lasers deliver their energy over the entire surface area of a treatment site (which may be optimal for certain types of conditions). Other lasers deliver “fractional” energy to just a portion of the skin (which may be optimal for a different set of conditions). With a Sciton JOULE TM, you can have it all.

“SAFE On ALL SKIn TyPES”

Why add Sciton resurfacing to your practice?

The Most Complete Resurfacing Product Line

ProFractional TherapyTM – A minimal downtime

treatment that creates micro-ablated channels deep

into dermal tissue (to treat a variety of pathologies and

stimulate new collagen growth), surrounded by islands

of untreated skin (to promote rapid healing)

MicroLaserPeel ® – A minimal downtime, light

resurfacing treatment limited to the epidermis that

evens out skin tone, texture & color, and restores a

healthy-looking, youthful glow to the skin

Deep Resurfacing – A more aggressive

procedure that literally erases wrinkles, pigmented

lesions and other skin irregularities in the

epidermis and dermis

•Scitonresurfacingtechnologyissaferyet moreeffectivethanCO2laserswithless downtime

•Itopensthedoortomanymorepatientsand willhelpyouturnmoreconsultationsinto customers

•Laserresurfacingisaveryhighprofit-margin procedurewhichisquicktoperform,yet producesamazingresults

•Itwillimprovetheoutcomesoffacialplastic surgerybytargetingthecentralpartofthe face,improvingskincolor&texture,and eliminatingperi-oral/peri-orbitalwrinkles

•Happypatientsarelikewalkingadvertisements; theirgreatresultsareobviousandoftenlead toreferralsof

Before & After Clinical Results

Pho

tos

cour

tesy

of T

odd

Bes

sing

er, M

D, P

hD

®

ProFractional™

1st Treatment: 200 μm ablation, 6.5% density2nd Treatment: 300 μm ablation, 6.5% density3rd Treatment: 450 μm ablation, 6.5% density

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-26

Rev

. A B

&A

PF

BEFORE / AFTER | 3 tx | courtesy of Todd Bessinger, MD, PhD ®

ProFractional™

1st Treatment: 200 μm ablation, 6.5% density2nd Treatment: 300 μm ablation, 6.5% density3rd Treatment: 450 μm ablation, 6.5% density

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-26

Rev

. A B

&A

PF

BEFORE / AFTER | 3 tx | courtesy of Todd Bessinger, MD, PhD

TEXTURE&PIGMENT

Before After 3 tx, 200-400 µm ablation

Pho

tos

cour

tesy

of R

. Jam

es K

och,

MD

®

ProFractional™

Parameters: 300 μm ablation

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-35

Rev

. A B

&A

PF

BEFORE / AFTER | Three weeks post 2 tx | courtesy of R. James Koch, MD ®

ProFractional™

Parameters: 300 μm ablation

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-35

Rev

. A B

&A

PF

BEFORE / AFTER | Three weeks post 2 tx | courtesy of R. James Koch, MD

ACTINICKERATOSIS

Before After 2 tx, 200 µm ablation

ProFractionalTM Therapy

Pho

tos

cour

tesy

of J

ason

Poz

ner,

MD

, FA

CS

®

MicroLaserPeel™

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-22

Rev

. A B

&A

MLP

BEFORE / AFTER | Five months post 1 tx | courtesy of Jason Pozner, MD, FACS ®

MicroLaserPeel™©

2009

Sci

ton,

Inc.

All

right

s re

serv

ed. 2

600-

033-

22 R

ev. A

B&

A M

LP

BEFORE / AFTER | Five months post 1 tx | courtesy of Jason Pozner, MD, FACS

SUNDAMAGE

Before After 1 Treatment

Pho

tos

cour

tesy

of B

ruce

Fre

eman

, MD

®

MicroLaserPeel®

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-21

Rev

. A B

&A

MLP

BEFORE / AFTER | 2 tx | courtesy of Bruce Freedman, MD ®

MicroLaserPeel®

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-21

Rev

. A B

&A

MLP

BEFORE / AFTER | 2 tx | courtesy of Bruce Freedman, MD

KERATOSIS

Before After 2 Treatments

MicroLaserPeel®

Pho

tos

cour

tesy

of J

. Dav

id H

olco

mb,

MD

®

Contour TRL™

Parameters: 50% overlap; 1st pass, 100 μm ablation, 0 μm coag; 2nd pass, 100 μm ablation, 50 μm coag; 3rd pass, 50 μm ablation, 50 μm coag

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-12

Rev

. A B

&A

TR

L

BEFORE / AFTER | 1 tx | courtesy of David J. Holcomb, MD ®

Contour TRL™

Parameters: 50% overlap; 1st pass, 100 μm ablation, 0 μm coag; 2nd pass, 100 μm ablation, 50 μm coag; 3rd pass, 50 μm ablation, 50 μm coag

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-12

Rev

. A B

&A

TR

L

BEFORE / AFTER | 1 tx | courtesy of David J. Holcomb, MD

SKINTONEANDTEXTURE

Before After 1 tx, 100 µm ablation

Pho

tos

cour

tesy

of L

ouis

W. A

post

olak

is, M

D

®

Contour™

Parameters: Face 240 μm ablation, 50s μm coag, 50% overlap Neck 70 μm ablation, 0 μm coag, 50% overlap Deeper Cheek Creases 360 μm ablation, 50 μm coag, 50% overlap

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-45

Rev

. A B

&A

Con

tour

BEFORE / AFTER | Four weeks post 1 tx | courtesy of Louis W. Apostolakis, MD ®

Contour™

Parameters: Face 240 μm ablation, 50s μm coag, 50% overlap Neck 70 μm ablation, 0 μm coag, 50% overlap Deeper Cheek Creases 360 μm ablation, 50 μm coag, 50% overlap

©20

09 S

cito

n, In

c. A

ll rig

hts

rese

rved

. 260

0-03

3-45

Rev

. A B

&A

Con

tour

BEFORE / AFTER | Four weeks post 1 tx | courtesy of Louis W. Apostolakis, MD

DEEPWRINKLESANDSKINTEXTURE

Before After 1 tx, 240-360 µm ablation

Deep Resurfacing

RobertAycock,MD, Pozner,MD,

Er:YAG

ProFractional Therapy with Tunable Thermal Zone

The Sciton TRL AdvantageHighly efficient ablation gives Sciton lasers the following advantages over the competition:

• More precise treatments• Safer on face and body• Treats more skin types• Shorter recovery times• Consistent, predictable results. Every time.

TRL (Tunable Resurfacing Laser) TechnologyThe world’s most sophisticated resurfacing technology enables:

• Independent control over ablation and thermal effects• “Turn off the heat” and deliver pure ablation• Very deep treatments with minimal risk of complications• Extremely precise ablation depth control

Emulation of other resurfacing technologiesTRL technology allows you to customize thermal effects

• Use no coagulation to emulate Er:yA G• Add a little coagulation to emulate Er:ySGG• Add a lot of coagulation to emulate C O2

• Individualize treatments for each patient’s needs

technologyscience

Pulse Width

Ener

gy

Pulse WidthPulse WidthPulse Width

No Coag Coag Level 1 Coag Level 2 Coag Level 3

Research has shown that the side effects common with CO2 lasers (hypopigmentation and prolonged erythema) are caused by thermally-induced inflammation and tissue necrosis. This will always be a concern for CO2 resurfacing technology because there is no way to separate the heat from the ablation.

Sciton resurfacing lasers are different. They are able to ablate with virtually no heat deposition because of extremely high energy absorption in water. The side effects common with other technologies are rarely observed with a Sciton laser, even in very deep treatments.

safety

Indications• Deep wrinkles, fine lines, peri-oral and peri-orbital rhytides

• Actinic keratosis

• Poor skin tone & texture

• Scar revision

Ablation Threshold

You can safely ablate as shallow or as deep as you wish with little thermal damage

A.JayBurns,MD,Michaels,

Er:YSGG CO2

ProFractional Therapy with Tunable Thermal Zone

High water ABSORPTION = High efficiency ABLATION & Precise CONTROL

Why is high water absorption important?

Wavelength (nm)

1000

0

Er:YAG(2940nm)

Er:YSGG(2790nm)

CO2(10600nm)

14000

Coe

ffici

ent

of a

bso

rptio

n (c

m-1)

12000

10000

8000

6000

4000

2000

1000

0

Superior water absorptionSciton’s Er:yAG wavelength at 2940 nm dominates the water absorption spectrum. It is absorbed by water 2.7 times stronger than Er:ySGG and 14.6 times stronger than CO2. Science cannot be denied. 2940 nm is the superior wavelength for maximum control in dermal resurfacing.

Emulation of other resurfacing technologiesTRL technology allows you to customize thermal effects

• Use no coagulation to emulate Er:yA G• Add a little coagulation to emulate Er:ySGG• Add a lot of coagulation to emulate C O2

• Individualize treatments for each patient’s needs

technologyscience

you can fine tune your treatments and patient downtime based on precise, user-selectable ablation depths.

efficacy

150 µm1000 µm

Sciton’s TRL laser energy impacts the skin and is immediately absorbed by water in epidermal and dermal tissue

Near 100% of the laser’s energy is consumed in tissue vaporization

Virtually no energy radiates into surrounding tissue

Popular Combinations

Sciton Combination TherapyThe Sciton JOULETM with TRLTM technology gives the physician far more treatment flexibility than any other laser. Combine procedures and fine tune ablation and thermal effects to give your patients the very best results, all in one session.

Some examples of popular combinations include:

MicroLaserPeel® (MLP®) + ProFractionalTM

Many practitioners now add MicroLaserPeels to all ProFractional treatments because the full coverage treatment of MLP makes the skin look healthier and more vibrant, while ProFractional targets conditions that exist deeper in the skin. The combined effect is superior cosmetic results with no additional downtime.

BBLTM (BroadBand Light) + ProFractionalTM

BBL is an intense pulsed light device (not a laser) available on the JOULE platform used to remove pigmented and vascular lesions, reduce acne, and remove hair. BBL works well with ProFractional Therapy and allows the physician to treat more conditions in the same session.

SkinTyteTM + ProFractionalTM

SkinTyte uses a broad spectrum of infrared light energy to deep-heat dermal tissue, leading to creation of a new collagen foundation and visible skin firming. Combining SkinTyte with ProFractional allows the physician to target collagen more broadly.

BBLTM + MicroLaserPeel® + ProFractionalTM

The attributes of these three treatments are unique and complementary, and are often used in combination to produce superior cosmetic results. With other laser and broadband light manufacturers, you have to purchase three separate systems to perform this combination. With Sciton, they are all available on one system – the JOULE.

ProFractional

ProFractional

ProFractional

JOULE Handpieces

ProFractionalMLP

BBL

SkinTyte

MLPBBL

Contour TRL(MicroLaserPeel & Deep Resurfacing)

Single Spot Handpiece

ProFractional & ProFractional-XC

4 mm 2 mm 0.5 mm

SkinTyte

BBL

+

+

+

+ +

20x20 mmscanned area

30x30 mmscanned area

925 Commercial Street, Palo Alto, California 94303

Phone: (888) 646 6999 • Email: info@sciton.com

www.sciton.com

©2010 Sciton, Inc. All rights reserved. Sciton is a registered trademark and JOULE is a trademark of Sciton, Inc. 2600-002-04 Rev. B

You would treat her with a Sciton Resurfacing laser.

Sciton JOULE™— Quite possibly the only aesthetic laser you ever need.

60 year old patient before treatment After ONE full face resurfacing treatment

Ph

oto

s co

urt

esy

of

Lo

uis

W. A

po

sto

lakis

, M

D

• Open the door to many more patients and increase your revenue.

• Target skin conditions not addressed by face lifts such as deep perioral/periorbitalrhytides and poor skin tone & texture.

• Augment your plastic surgery procedures to help you deliver the “home run”results your patients really want.