contents industrial ethernet introduction active ... · waveline switches eco-line switches...
TRANSCRIPT
I
Co
nte
nts
A
B
C
D
E
W
X
Industrial EthernetCAT
ALO
GU
E
9Industrial Ethernet Introduction
Active components
Passive components
Cable
Accessories
Appendix Technical appendix
Connection possibilities for redundant power supplies / Glossary
Index
Search according to Type or order number, Addresses worldwide
II
Industrial Ethernet
Product overview
WaveLine switches ECO-Line switches AdvancedLine switches Managed WaveLine switches
Page B.14 Page B.18 Page B.23 Page B.32
Managed Line switches IP 67 switches Decentralised I/O remotes WaveLine Router
Page B.34 Page B.38 Page B.40 Page B.46
GPRS alarm modem WLAN bridge SAI-Bluetooth Media converters
Page B.56 Page B.62 Page B.66 Page B.70
COMServer Power Over Ethernet Sets of IP67 plug-in connectors IP67 housing
Page B.74 Page B.78 Page C.10 Page C.13
Inserts IP67 outlet boxes Junction box, connector Terminal rail outlet
Page C.18 Page C.21 Page C.22 Page C.23
III
Product overview
19" patch panel IP20 plug-in connectors, RJ45 IP20 plug-in connectors, FO Built-in flange
Page C.26 Page C.27 Page C.29 Page C.34
M12 connection system Front panel interface Installation cables Connecting cables
Page C.38 Page C.44 Page D.5 Page D.9
Trailing cables RJ45 patch cables RJ45/M12 system cables FO connecting cables
Page D.13 Page D.17 Page D.19 Page D.35
FO system cables FO system cables Sheathing stripper Pressing tool
Page D.37 Page D.41 Page E.5 Page E.9
Cable tester Markers Overvoltage protection Switched-mode power units
Page E.11 Page E.15 modules Page E.19 Page E.21
IV
Intr
od
uc
tio
n
A
A.1
Contents
Industrial Ethernet
Introduction Industrial Ethernet A.2
Network components from Weidmüller A.3
Online Services A.4
Cable configurator A.7
Intr
od
uc
tio
n
A
A.2
Industrial Ethernet
Industrial Ethernet
Over the past 20 years or so Ethernet has evolved to become
the standard network technology for the office and IT
environments. The compatibility of components from different
manufacturers has been a contributing factor. Technical
performance and reliability have also played a role in this trend.
This has resulted in a wide range of inexpensive and efficient
components and systems, and hence significant benefits for
users.
The majority of current Ethernet standards represent fully-
developed technology. A quick overview of the development
of Ethernet standards might look something like this:
1980 Standard „Ethernet V1.0“ (DEC, Intel, Xerox)
1982 Standard IEEE 802.3: „Yellow cable Ethernet“
1986 „Cheap-Ethernet“ (10BASE2)
1991 „Ethernet on Twisted-Pair“ (10BASE-T)
1995 Fast Ethernet (100BASE-T)
1998 Gigabit-Ethernet
2000 Ethernet IP
2001 Power link
2002 10 Gigabit-Ethernet
PROFINET
Ethercat
Industrial users have also recognised the advantages of bus
technologies and network solutions. For example, the 1990s
saw the development of fieldbus standards heavily based on
specific manufacturer’s specifications, and thus not compatible
with each other. From the point of view of their technical
development, these systems are without doubt very stable
these days, but the user is limited in the selection of a Fieldbus
system to only a few manufacturers. It is only possible to
change systems with great cost and with significant effort for
the training of personnel.
So why do we need Industrial Ethernet when the established
systems still work? There are a number of reasons for this:
enables system interoperability
Production data is directly accessible in the office
environment without the need for interfaces
available know-how for dealing with Ethernet networks
can also be used in the factory.
opportunities for a variety of applications (for example,
the transmission of images or the parallel use of network
resources).
interfaces for machines setup and maintenance, for example
Ethernet will continue to benefit from new developments in
the enormous IT network infrastructure market.
The possibilities for WLAN applications here are surely only
the beginning.
Industrial Ethernet is evolving into the dominant standard for
industrial network technology. With a universally applicable
technical standard as the basis, manufacturers can combine
networks and their components. Weidmüller can provide users
with long-lasting, maintenance-free electrical connections. With
traditional products for switching cabinets but also innovative
and standardised components for industrial networks.
Intr
od
uc
tio
n
A
A.3
Network components from Weidmüller
The Weidmüller product portfolio for Industrial Ethernet applica-
tions shows that we can be a dependable, high-quality partner
for all your requirements even in the age of “open automation”!
In the Industrial Ethernet market, Weidmüller is positioned as a
network infrastructure supplier in technology terms. Active and
passive components complemented by a range of accessories
for management, connection, supply, protection, switching,
conversion, amplification, disconnection and communication
functions.
The Weidmüller network components show how we focus on
one key area of our expertise: connection technology from the
control to the field – all from one supplier. What this means
for Industrial Ethernet applications is in addition to the purely
electromechanical products such as plugs, cables and outlets,
Weidmüller can also supply a series of electronic devices
necessary for the standardised operation of a multi-service
network infrastructure. A comprehensive range of products
for industrial applications – all from one supplier. This enables
planners and installation personnel to set up a fully equipped
network. Weidmüller can also supply proven products such as
signal converter conditioners, switch-mode power units, cable
devise and terminal markers and a wide selection of tools.
Industrial Ethernet
Intr
od
uc
tio
n
A
A.4
5
8
7
6
1
4
3
2
Visit our network infrastructure micro-site at
http://networkcomponents.weidmueller.com
The micro-site is updated continuously and is available in
German, English and Spanish. We look forward to your
mouse click!
3D factory workshop
Our factory workshop is found at our micro-site. Click on the various sections of the assembly line to learn more about the
application fields for our products. The 3D factory workshop is an interactive experience, with 3-D product animations, drawings
and films.
Online Services
Network infrastructure micro-site
Intr
od
uc
tio
n
A
A.5
Online Services
1 Materials handling
IE-line connector line, in IP67
with STEADYTEC technology
2 Switchgear cabinet in the facility / Power distribution
FrontCom® lockable, in IP65
for security and remote
maintenance
3 Human Machine Interface
WaveLine switches in
compact plastic housing
rugged aluminium
4 Robots
Sturdy connection with the M12
connection system
5 Sub-distribution board
Sturdy junction boxes in
die-cast aluminium housing,
for implementing Ethernet in
the harshest IP67 industrial
environments.
6 Cable conduit
Cabling of machine workshops,
with installation or connection
conductors using copper or
fibre-optic cable
7 Robotics switchgear cabinet
Reliable connection for
your installation cable with
mounting-rail outlets
8 Forklift
The WaveLine WLAN bridge,
for error-free operation within
the production facility
Intr
od
uc
tio
n
A
A.6
Online Services
Online product catalogue
With one-click selection for the product data sheet of your choice.
If you have questions about the specifications and details of
our products, perhaps even outside normal business hours,
then our online catalogue at
http://catalog.weidmueller.com
– open 24 hours a day, 365 days a year – is the perfect source
of information. Besides product features and part numbers, it
contains extensive additional information on all product groups.
And for further information, offers and your personal contact,
simply consult the Weidmüller website at
www.weidmueller.com
Intr
od
uc
tio
n
A
A.7
Cable configurator
Cable configurator
The cable configurator allows you to configure your specific
order – and ready.
Make your selection from the list of available cables (material
for cable sheathing, category, colour, …). Then choose the
connector for the right and left cable end. Then choose the
cable length. Configurations which are not possible are marked
in red, so that it is not possible to create an unsupported or
wrong configuration.
A variety of cables and connectors are available from our
Industrial Ethernet product line. These selections include category
5 or 7 cable, with PVC sheathing, in PUR, and of course
PROFINET-specific cable. A number of versions are available on
PushPull (V4) versions, bayonet (V1) and RockStar®
The fibre-optic cable is configured similarly: simply choose the
your customized cable. IP67 versions are also available here.
After you have made your selection, there are several available
options:
for quote or order.
The cable configurator is your quickest path to finding the specific
industrial Ethernet cable which you need.
Whether you are looking for a fibre-optic or copper cable, the
wconfigurator will find it for you.
Intr
od
uc
tio
n
A
A.8
Ac
tive
co
mp
on
en
ts
B
B.1
Contents
Active components
Active components
Introduction B.2
Switches with no management function B.12
Switches with management functions B.26
IP67 switches B.36
Decentralised I/O remotes B.40
Security router B.46
Industrial wireless B.56
Optical media converter B.70
Serial media converter B.74
Power over Ethernet B.78
Ac
tive
co
mp
on
en
ts
B
B.2
Introduction
Industrial Ethernet – Active components
Intelligent data distribution in the electrical cabinet:
unmanaged and managed switches.
Many applications require a central switch in the switching
cabinet for the decentralized setup of industrial networks.
Unmanaged switches are the simplest entry point into the world
of Industrial Ethernet They are self-configuring and allow you to
quickly and conveniently setup industrial network infrastructures.
Managed high-performance switches can be used to control
the flow of data for complex demands. Simple web-interface
configuration is possible by means of the integrated software
program, or with a terminal emulation program using an RS232
or USB port.
Weidmüller offers all versions from 3–24 ports, in various
shapes, for the ideal fit regardless of the installation
requirements. Switches with fibre optic ports are also available
for transmission paths which are very long or stretches exposed
to high electromagnetic interference. Weidmüller also delivers
versions for the electrical cabinet and versions with IP67 housing
for use directly „in the field“. Industrial-standard versions are
available, as are versions with an extended temperature range
(-40 to +75°C). Naturally, these products comply with all relevant
industrial and application testing standards.
Secure gateways between networks: the router and the
GPRS alarm modem.
Routers are anywhere when multiple networks need to be
connected together. Routers are responsible not only for
connecting the networks but also for securing them by
regulating access to nodes and data within the networks.In
addition to Ethernet routers, Weidmüller offers routers for
establishing connections on top of public networks, whether
they are the Internet or (analogue, digital or wireless) telephone
networks. If required, Weidmüller can also deliver turnkey
„out-of-the-box“ solutions for the remote monitoring of industrial
facilities.
Transformation and adaptation: the media converter,
ComServer and WLAN bridge.
Weidmüller offers a comprehensive line of network components
for adapting and converting interfaces: the ComServer can be
used when devices which lack their own Ethernet interface need
to be connected to the net.Media converters allow you to adapt
existing interfaces by converting a copper interface to fibre-
optic, or vice versa. WLAN bridges allow you to establish
wireless connections between network nodes.
Ac
tive
co
mp
on
en
ts
B
B.3
Introduction
Overview
Switches with no management function
IE-SW5-ECO IE-SW4/1SC-ECO IE-SW5-ECO-FLAT IE-SW8-ECO IE-SW5-WAVE IE-SW3/1SC-WAVE
IE-SW8-WAVE IE-SW6/2ST-ECO IE-SW8-ADVANCED IE-SW22/2ST-ADVANCED IE-SW8/2GBIT-ADVANCED
Switches with management function IP67 switches
Decentralised
I/O remotes
IE-SW6/2SC-1300-M-WAVE IE-SW8-2DIO-M-WAVE IE-SW22/2ST-M IE-SW8-M-IP67 SAI-AU
Security router Industrial wireless
IE-AR-100T-WAVE IE-GPRS-I/O SAI Bluetooth IE-WLAN-BRIDGE-WAVE
Optical media converter Serial media converter Power over Ethernet
IE-MC-SC-WAVE IE-MC-ST COMServer PoE Injektor
Ac
tive
co
mp
on
en
ts
B
B.4
Introduction
The total Industrial Ethernet solution - all from a single source
Active components
Connection elements Cable Power supply Surge protection markers Accessories
Starting at Chapter C Starting at Chapter D Starting at Chapter E Starting at Chapter E Starting at Chapter E Starting at Chapter E
Ac
tive
co
mp
on
en
ts
B
B.5
Introduction
WaveLine Switches unmanaged
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 2,7GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 4kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 10-57 Hz, amplitude: 0.3 mm
frequencies: 57-500 Hz, acceleration: 2g
IEC 60068-2-27 Shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -25°C ... 70°C
non operating -40°C ... 85°C
IEC 60068-2-14 thermal shock
operating 0°C ... 60°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
WaveLine Switches managed
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 2,7GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 4kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 5-8,4 Hz, amplitude: 3,5 mm
frequencies: 8,4-150 Hz, acceleration: 1g
IEC 60068-2-27 Shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -40°C ... 70°C
non operating -40°C ... 85°C
IEC 60068-2-14 thermal shock
operating 0°C ... 55°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
WaveLine Media Converter
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 2,7GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 4kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 10-57 Hz, amplitude: 0.3 mm
frequencies: 57-500 Hz, acceleration: 2g
IEC 60068-2-27 shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -25°C ... 70°C
non operating -40°C ... 85°C
IEC 60068-2-14 thermal shock
operating 0°C ... 60°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
WaveLine COMServer / WLAN bridge
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 2,7GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 4kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 10-57 Hz, amplitude: 0.3 mm
frequencies: 57-500 Hz, acceleration: 2g
IEC 60068-2-27 shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -25°C ... 70°C
non operating -40°C ... 85°C
IEC 60068-2-14 thermal shock
operating 0°C ... 60°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
Approvals and Certifications
In order to be adequately prepared for harsh industrial condi-
tions, our products have been tested for compliance with the
PLC standard IEC 61131-2:2007.
The Standard IEC 61131-2 for PLCs is entitled „Programmable
Logic Controllers – Part 2: Equipment Requirements and Tests“.
It describes requirements pertaining to EMC (electromagnetic
compatibility), shock and vibration resistance, and environmental
temperatures. These limit values in the IEC standard are fairly
similar to the requirements we have encountered in the real
world. Our products comply with the following basic standards
in detail:
Ac
tive
co
mp
on
en
ts
B
B.6
Introduction
ECO-Line
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 1,0GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 1kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-11 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-1 & IEC 60068-2-2
operating 0°C ... 60°C
non operating -40°C ... 85°C
AdvancedLine unmanaged
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 1GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 1kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-11
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 5-9 Hz, amplitude: 3.5 mm
frequencies: 9-150 Hz, acceleration: 1g
IEC 60068-2-27 shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -40°C ... 75°C
non operating -40°C ... 75°C
IEC 60068-2-14 thermal shock
operating 0°C ... 60°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
AdvancedLine managed
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 1GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 1kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-11
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 5-9 Hz, amplitude: 3.5 mm
frequencies: 9-150 Hz, acceleration: 1g
IEC 60068-2-27 shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -40°C ... 75°C
non operating -40°C ... 75°C
IEC 60068-2-14 thermal shock
operating 0°C ... 60°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
Media Converter
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 1GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 1kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-11
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 5-9 Hz, amplitude: 3.5 mm
frequencies: 9-150 Hz, acceleration: 1g
IEC 60068-2-27 shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -40°C ... 75°C
non operating -40°C ... 75°C
IEC 60068-2-14 thermal shock
operating 0°C ... 60°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
Ac
tive
co
mp
on
en
ts
B
B.7
Introduction
IP 67 switch
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 4kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 1GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 2kV
EN 61000-4-5 (surge) 0,5/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-11
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 10-57 Hz, amplitude: 0.3 mm
frequencies: 57-500 Hz, acceleration: 2g
IEC 60068-2-27 shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -25°C ... 70°C
non operating -40°C ... 85°C
IEC 60068-2-14 thermal shock
operating 0°C ... 60°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
Access router
EMC Shock- & vibration-test Environment-test
EN 55022:1995, Class A
EN 55024 1998
EN 61000-4-2 (ESD) 4kV/8kV
EN 61000-4-3 (radiated immunity) @AM 10V/average 80MHz - 1GHz
EN 61000-4-4 (burst) 2kV; I/O 1kV
EN 61000-4-5 (surge) 1kV
EN 61000-4-6 (conducted immunity) @10V 150kHz - 80MHz
EN 61000-4-29 (voltage variation)
EN 55011 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 5-9 Hz, amplitude: 3.5 mm
frequencies: 9-150 Hz, acceleration: 1g
IEC 60068-2-27 shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating 0°C ... 60°C
non operating -20°C ... 60°C
IEC 60068-2-30 damp heat
GPRS-Line IO Quad
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 4kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 1GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 1kV
EN 61000-4-5 (surge) 0,5kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-11
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
radiated emissions 30MHz - 1GHz pp/average
IEC 60068-2-6 sinusoidal vibrations
frequencies: 5-9 Hz, amplitude: 3.5 mm
frequencies: 9-150 Hz, acceleration: 1g
IEC 60068-2-27 shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -10°C ... 55°C
non operating -10°C ... 70°C
IEC 60068-2-30 damp heat
WaveLine router (still in certification process)
EMC Shock- & vibration-test Environment-test
EN 61000-4-2 (ESD) 6kV/8kV
EN 61000-4-3 (radiated immunity)
ENV 50204 @AM 10V/average 80MHz - 2,7GHz
EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 4kV
EN 61000-4-5 (surge) 2/1kV
EN 61000-4-6 (conducted immunity)
ENV 50204 @10V 150kHz - 80MHz
EN 61000-4-29 (voltage variation)
EN 55022 (HF E)
conducted emissions 150kHz - 30MHz
radiated emissions 30MHz - 1GHz pp/average
radiated emissions 30MHz - 1GHz pp/qp
IEC 60068-2-6 sinusoidal vibrations
frequencies: 5-8,4 Hz, amplitude: 3,5 mm
frequencies: 8,4-150 Hz, acceleration: 1g
IEC 60068-2-27 Shock test, half-sinusoidal
shock acceleration: 15g (operating) 30g (non operating)
shock period: 11ms
IEC 60068-2-1 & IEC 60068-2-2
operating -25°C ... 70°C
non operating -40°C ... 85°C
IEC 60068-2-14 thermal shock
operating 0°C ... 55°C
non operating -40°C ... 80°C
IEC 60068-2-30 damp heat
Ac
tive
co
mp
on
en
ts
B
B.8
Technician
PC with
Configurator
Firmware update Managed
switches
Security
router
Serial media
converter
Firmware update
Change configuration
Customer
Introduction
Weidmüller Device Configurator
Weidmüller has developed an in-house software solution for
configuring our line of active Industrial Ethernet devices.
With the Weidmüller Device Configurator, you can update the
firmware or configuration on individual devices or on device
groups. The Configurator enables a wide range of configurable
settings which vary depending on the device.
The following products are supported by the Configurator:
– WaveLine managed switches
– WaveLine security routers
– WaveLine WLAN bridges
– WaveLine serial media converters
The Configurator is based on the Eclipse Rich Client platform,
which requires the Java run-time environment. We are thus able
to deliver our Configurator for Windows, Linux and MacOS
platforms.
The Configurator can be used to perform remote maintenance,
such as updating the firmware for any supported device. The
PC on which the Configurator runs does not need to be
connected on-site. Changes and settings can similarly be
carried out using the Configurator.
Remote maintenance with the Device Configurator
Configurator characteristics include:
– Eclipse Rich Client platform and Java development/software
platform
– runs under Windows, Linux and MacOS (with the relevant
drivers installed)
– enables configuration of all supported devices with one program
– firmware updates for all supported devices using the
Configurator
– location and group assignments to facilitate device
administration
Functional scope for supported Industrial Ethernet devices, the
WaveLine serial media converter and the WaveLine WLAN bridge
– full configuration of ComServer is possible within the
Configurator
– setup of virtual COM port drivers
WaveLine SWxx-M
– firmware can be updated via Ethernet or serial port
– configuration can be imported or exported over the Internet
– IP settings can be imported or exported
– SNMP settings can be imported or exported
Security router
– updating the firmware
– import and export of the router‘s configuration file
– export of the router‘s log file
Ac
tive
co
mp
on
en
ts
B
B.9
Introduction
COM port configuration
Firmware update for a group of devices
The search for
supported devices
Configuring the IE-SWx-M-Wave
Ac
tive
co
mp
on
en
ts
B
B.10
Introduction
An overview of PROFINET and EtherNet/IP components
PROFINET Class A
A great demand for communication exists within machines and
facilities that have a decentralized, modular design. PROFINET
can be used as a communication technology in such a setting.
PROFINET is the open Industrial Ethernet standard from the
PROFIBUS User Organization. It enables corporate-wide
communication and automation. There are two fundamental
functional classes within PROFINET. The first is PROFINET CBA
(Component Based Automation). This is the original version
based on a component model for communicating between
intelligent automation devices (for example programmable logic
controllers or PLCs). The second is PROFINET IO and is used
for decentralized peripherals. This newer technology is designed
for communications between controllers and decentralized field
devices.
EtherNet/IP
EtherNet/IP (Ethernet Industrial Protocol) is an open standard
that was developed by Rockwell Automation and the Open
DeviceNet Vendor Association (ODVA) for industrial networks.
EtherNet/IP is based on the Ethernet TCP/IP standards and the
Common Industrial Protocol (CIP). CIP is an open standard
implemented at the application layer (ISO layer 7). It is used in
ControlNetTM and DeviceNetTM. This enables continuous
communications between the field level and the Internet. The
protocol includes both a control mechanism for cyclic, real-time
I/O signal transmission (implicit messaging) and an information
mechanism for configuration, diagnosis and management
messages (explicit messaging).
Unmanaged Switches Managed Switches Media converter
WaveLine, starting at page B.14 WaveLine, starting at page B.32 Optical media converter, starting at page B.72
ECOLine starting at page B.18 AdvancedLine starting at page B.34
AdvancedLine starting at page B.23 IP67 Switches starting at page B.39
IP67 Switches starting at page B.38
Ac
tive
co
mp
on
en
ts
B
B.11
Introduction
Markers and labels for Industrial Ethernet components
WaveLine WS 15/5 MC BLANK
IP67 ESG 8/13.5/43.3 SAI AU
Cables and lines SF 4.7 – 5.8 mm; 5.8 – 7.0 mm
PrintJet PRO
The PrintJet PRO inkjet printer prints markers for electric
connectivity. These markers can be used for clear equipment
identification on devices, cables and connectors. The labelling
makes servicing, maintenance and troubleshooting much easier.
Water-based ink is used for the black or spot colour printing.
The print is crystal clear and resistant to environmental influences.
The PrintJet PRO prints plastic markers in MultiCard format. In
combination with the user-friendly M-Print® PRO software and
the attached loader, the printer becomes an essential part of
the production.The inkjet process being used, the subsequent
fusing, as well as the printer cartridge and ink have all been
specially adapted by Weidmüller for industrial use. The printer
has excellent long-term use capabilities, thanks to its integrated
loader.
Ordering data PrintJet PROType Order No.
PrintJet PRO 115V 1024050000
PrintJet PRO 230V 1001180001
Accessories
PJ PRO TNTK INK SET BK Ink tank starter set, black 1027090000
PJ PRO TNTK INK SET COL Ink tank starter set, colour 1027110000
PJ PRO TNTK INK K Ink tank Black 1027040000
PJ PRO TNTK INK C Ink tank Cyan 1027050000
PJ PRO TNTK INK M Ink tank Magenta 1027060000
PJ PRO TNTK INK Y Ink tank Yellow 1027070000
PJ PRO TNTK FL Ink tank fluid 1027080000
Ac
tive
co
mp
on
en
ts
B
B.12
Switches without management functions
Unmanaged switches
Switches are the heart of an Industrial Ethernet network
infrastructure
Lack of predictability of the timing behaviour was for a long
time used as an argument against the use of Ethernet in
industrial applications. However, this reasoning was in most
cases based on experience with early network topologies in
which the network users were interconnected via so-called
hubs. A hub forwards all the packets received at one port to
all the other ports. Such networks use the CSMA/CD method
(Carrier Sense Multiple Access with Collision Detect) to specify
who may transmit and when.
In the CSMA method the station wishing to transmit listens
to the channel (carrier sensing) before it transmits data. A
station may transmit only when the transmission medium is
not already being used by another station. If the transmission
medium is in use, the station waits until it is free before sending
its data. Owing to the signal propagation delays, it can never-
theless happen that two devices transmit simultaneously. In
order to avoid a loss of data in a collision case, both transmit ters
must be able to detect the collision (collision detect) and
retransmit their data packets after an arbitrarily selected delay.
CSMA/CD is the customary standard for 10-Mbit networks with
hubs.
Early Ethernet network topologies, some of which are still
in use today, use hubs as standard because the complex
switches produced in the 1980s and early 1990s were very
expensive.
Plug & Play switches – ECO Line and WaveLine
The ECO Line and WaveLine from Weidmüller are cost-effective
ways of gaining a foothold in the world of Industrial Ethernet.
Ongoing adap-tation of our products to new technologies and
the needs of our customers, enables users to set up network
infrastructures for industrial applications simply and quickly.
The ECO Line products require absolutely no configuration and
for many products even the pin assignment of the connecting
cables is flexible thanks to their auto-crossover functionality
(Auto-MDI/X). This means that they can use straight-through
cables for connections between switches and terminal devices
and also for connections between switches, making crossover
cables no longer obligatory.
With its coherent housing design, the impressive WaveLine can
be integrated together with up to eight copper ports and one
optional fibre-optic connection. With an optionally extendable
temperature range – from 0 °C...60 °C to –20 °C...60 °C – the
WaveLine is suitable for a wide range of applications.
Plug & Play switches – AdvancedLine
When the demands are even greater, then we recommend
Weidmüller’s AdvancedLine. In addition to the new features of
the WaveLine, the switches of the AdvancedLine provide further
benefits for applications in tough conditions:
usage range from –40 to 75 °C. This allows their use in rooms
without climate control and operation outside of the normal
temperate zone.
possible in industrial applications. The optional FO ports
ensure trouble-free operation even over long distances
through strong electromagnetic fields and are available in
multimode or singlemode versions.
enables existing units to be exchanged for new ones with
more ports without having to shift all the other components
on the rail or having to extend the switching cabinet
24 ports and two optional FO ports in a compact aluminium
housing.
operation even if the majority of terminal devices connected
may have already shut down
a redundant power supply option, enable quick connection
and disconnection of the power supply when working on
the network
ideal for robust and reliable Industrial Ethernet networks
Refer to Chapter W for a description of the connection
possibilities for redundant power supplies.
Ac
tive
co
mp
on
en
ts
B
B.13
Switches without management functions
An application example for an unmanaged switch
Production facility
Operator front-end
PLC
CU
CU
CUCU
CU
CU
FO
WaveLine switch
WaveLine switch
AdvancedLine switch
Ordering overview for unmanaged switchesType RJ-45 Multimode SC Multimode SCRJ Multimode ST Multimode LC Singlemode SC Temperature range Order No.
ECO-Line
IE-SW5-ECO-FLAT 5 – – – – – 0 °C … 60 °C 8833790000
IE-SW5-ECO 5 – – – – – 0 °C … 60 °C 8808230000
IE-SW4/1SC-ECO 4 1 – – – – 0 °C … 60 °C 8953080000
IE-SW4/1ST-ECO 4 – – 1 – – 0 °C … 60 °C 8953060000
IE-SW8-ECO 8 – – – – – 0 °C … 60 °C 8829430000
IE-SW6/2SC-ECO 6 2 – – – – 0 °C … 60 °C 8953070000
IE-SW6/2ST-ECO 6 – – 2 – – 0 °C … 60 °C 8953050000
WaveLine
IE-SW3-WAVE 3 – – – – – 0 °C … 60 °C 8897710000
IE-SW3-ETR-WAVE 3 – – – – – –20 °C … 60 °C 8961210000
IE-SW3/1SC-WAVE 3 1 – – – – 0 °C … 60 °C 8896920000
IE-SW3/1SCS20-WAVE 3 – – – – 1 0 °C … 60 °C 8953090000
IE-SW3/1SCS20-ETR-WAVE 3 – – – – 1 –20 °C … 60 °C 8962280000
IE-SW3/1ST-WAVE 3 – – 1 – – 0 °C … 60 °C 8896930000
IE-SW3/1LC-WAVE 3 – – – 1 – 0 °C … 60 °C 8944350000
IE-SW5-WAVE 5 – – – – – 0 °C … 60 °C 8896940000
IE-SW5-ETR-WAVE 5 – – – – – –20 °C … 60 °C 8961220000
IE-SW6/1SC-WAVE 6 1 – – – – 0 °C … 60 °C 8896950000
IE-SW6/1SCS20-WAVE 6 – – – – 1 0 °C … 60 °C 8953100000
IE-SW6/1SCS20-ETR-WAVE 6 – – – – 1 –20 °C … 60 °C 8962290000
IE-SW6/1ST-WAVE 6 – – 1 – – 0 °C … 60 °C 8896960000
IE-SW6/1LC-WAVE 6 – – – 1 – 0 °C … 60 °C 8944360000
IE-SW6/2SC-WAVE 6 2 – – – – 0 °C … 60 °C 8953770000
IE-SW6/2SCRJ-WAVE 6 – 2 – – – 0 °C … 60 °C 8953800000
IE-SW6/2ST-WAVE 6 – – 2 – – 0 °C … 60 °C 8953790000
IE-SW8-WAVE 8 – – – – – 0 °C … 60 °C 8896970000
AdvancedLine
IE-SW6/2SC-ADVANCED 6 2 – – – –40 °C … +75 °C 8942450000
IE-SW6/2SCS-ADVANCED 6 – – – 2 –40 °C … +75 °C 8942470000
IE-SW6/2ST-ADVANCED 6 – 2 – – –40 °C … +75 °C 8942460000
IE-SW8-ADVANCED 8 – – – – –40 °C … +75 °C 8942440000
IE-SW14/2SC-ADVANCED 14 2 – – – –40 °C … +75 °C 8808280000
IE-SW14/2SCS-ADVANCED 14 – – – 2 –40 °C … +75 °C 8851880000
IE-SW14/2ST-ADVANCED 14 – 2 – – –40 °C … +75 °C 8808290000
IE-SW16-ADVANCED 16 – – – – –40 °C … +75 °C 8808270000
IE-SW22/2SC-ADVANCED 22 2 – – – –40 °C … +75 °C 8808310000
IE-SW22/2SCS-ADVANCED 22 – – – 2 –40 °C … +75 °C 8851890000
IE-SW22/2ST-ADVANCED 22 – 2 – – –40 °C … +75 °C 8808320000
IE-SW24-ADVANCED 24 – – – – –40 °C … +75 °C 8808300000
B.14
B
Unmanaged switch, WaveLine, 3-5 ports
129
22.5108
% \ "
Unmanaged switch, WaveLine 3 to 5 ports Ordering data
Number of ports
3 x RJ45
5 x RJ45
Type Order No.
8897710000
8896920000
8953090000
8896930000
8944350000
8896940000
Accessories
Type Order No.
8813490000
1609880000
Note
Technical data
TS 35
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
Rail assembly
B.15
B
Unmanaged switch,
WaveLine with extended temperature range
129
22,5108
% \ "
WaveLine with extended temperature range Ordering data
Number of ports
3 x RJ45
5 x RJ45
Type Order No.
8961210000
8962280000
8961220000
Accessories
Type Order No.
8813490000
1609880000
Note
Technical data
TS 35
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
Rail assembly
B.16
B
Unmanaged switch, WaveLine, 6-8 ports
45
129
108
% \ "
Unmanaged switch, WaveLine 6 to 8 ports Ordering data
Number of ports Type Order No.
8896950000
8953100000
8896960000
8944360000
8896970000
Accessories
Type Order No.
8813490000
1609880000
Note
Technical data
TS 35
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
Rail assembly
B.17
B
Unmanaged switch,
WaveLine with extended temperature range
45
129
108
% \ "
WaveLine with extended temperature range Ordering data
Number of ports Type Order No.
8962290000
8953770000
8953790000
8953780000
8953800000
Accessories
Type Order No.
8813490000
1609880000
Note
Technical data
TS 35
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
Rail assembly
B.18
B
Unmanaged switch, ECO-Line 5 port flat
1 2 3 4 5
PORTS
12345
2 3 4 51
4EA4
Power
100 Mbps Link
10 Mbps Activity
100 Mbps Activity
10 Mbps Link
Yellow Flashing
Green Solid
Green Flashing
Yellow Solid
Port Indicators
Class 2 Circuits Only
Power
~~0VDCDC
AC
16 mm0.63"
20 mm
84 mm
25 mm89 mm
25.4 mm
TS
-35 D
IN-R
ail
% \ "
Unmanaged switch, ECO-Line 5 port flat Ordering data
Number of ports
5 x RJ45
Type Order No.
8833790000
Accessories
Type Order No.
8813490000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
B.19
B
Unmanaged switch, ECO-Line 5 port
23 mm
50 mm
70 mm
16 mm
100 mm
25.4 mm
TS
-35 D
IN-R
ail
% \ "
Unmanaged switch, ECO-Line 5 port Ordering data
Number of ports
5 x RJ45
Type Order No.
8808230000
Accessories
Type Order No.
8813490000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
B.20
B
Unmanaged switch, ECO-Line 4 port
0.16”4 mm
0.97”25 mm
2.42”61 mm
0.59”15 mm
4.85”123 mm
2.74”70 mm
0.315”8 mm
1.00”26 mm
TS
-35 D
IN-R
ail
% \ "
Unmanaged switch, ECO-Line 4 port
Note
Ordering data
Number of ports
Note
Type Order No.
8953080000
8953060000
Accessories
Type Order No.
8813490000
Note
Technical data
TS 35
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
B.21
B
Unmanaged switch, ECO-Line 8 port
25 mm
16 mm
100 mm
98 mm 44.1 mm
TS
-35 D
IN-R
ail
% \ "
Unmanaged switch, ECO-Line 8 port Ordering data
Number of ports Type Order No.
8829430000
Accessories
Type Order No.
8813490000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
B.22
B
Unmanaged switch, ECO-Line 6 port
0.16”4 mm
0.97”25 mm
2.57”65 mm
0.59”15 mm
5.15”131 mm
3.79”96 mm
0.315”8 mm
1.61”41 mm
TS
-35 D
IN-R
ail
% \ "
Unmanaged switch, ECO-Line 6 port
Note
Ordering data
Number of ports
Note
Type Order No.
8953070000
8953050000
Accessories
Type Order No.
8813490000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
B.23
B
Unmanaged switch, Advanced Line, 8-24 ports
9 mm
.35”
TS
-35 D
IN-R
ail
79 mm
3.1” 156 mm
6.14”
14 mm
.530”
44 mm
1.75”
Allow 3.25” (85 mm)
for Fiber Optic Cable.
% \ "
u
Unmanaged switch, Advanced Line, 8–24 ports Ordering data
Number of ports Type Order No.
8808300000
8942450000
8942470000
8942460000
8942440000
8808280000
8851880000
8808290000
8808270000
8808310000
8851890000
8808320000
Accessories
Type Order No.
8813490000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
Ac
tive
co
mp
on
en
ts
B
B.24
Gigabit switches for network with large volumes of data
Switches without management functions
Weidmüller‘s new gigabit-capable generation of switches
feature a secure connection in large data-volume
environments.
Gigabit backbones are becoming the standard for industrial
networks. Weidmüller‘s new gigabit-capable generation of
switches enable a secure connection for Fast Ethernet machine
networks to gigabit backbones. The switches feature two
gigabit-capable uplinks suitable for both star and linear
topologies.
Production facility
Workstation
Production facility
Workstation
GBit Backbone GBit Backbone
SFP Transceiver
Fast Ethernet Fast Ethernet
Ordering data
SFP transceiver
1068240000 1068250000 1068270000 1068280000 1068290000 1068310000 1069320000
Part designation IE-SFP-FE-1310-MM IE-SFP-FE-1310-SM20 IE-SFP-FE-1310-SM40 IE-SFP-1G-850-MM IE-SFP-1G-1310-SM10 IE-SFP-1G-1310-SM40 IE-SFP-1G-RJ45-100
Dimensions, mm 13.7 x 56.5 x 8.5 13.7 x 56.5 x 8.5 13.7 x 56.5 x 8.5 13,7 x 56,5 x 8,5 13.7 x 56.5 x 8.5 13.7 x 56.5 x 8.5 13.27 x 70.2 x 8.5
Connector Duplex LC connector Duplex LC connector Duplex LC connector Duplex LC connector Duplex LC connector Duplex LC connector RJ45 connector
Data rate 125Mbit/s 125Mbit/s 125Mbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s
Data transmission 100 Mbit 100 Mbit 100 Mbit 1 Gbit 1 Gbit 1 Gbit 1 Gbit
Wave length 1310 nm 1310 nm 1310 nm 850 nm 1310 nm 1310 nm no
Power supply 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Range of coverage 2 km 20 km 40 km 550 m at 50/125 μm,
275 m at 62.5/125 μm
10 km 40 km 100 m
Operating temperature –40 °C to +85 °C –40 °C to +85 °C –40 °C to +85 °C –40 °C to +85 °C –40 °C to +85 °C –40 °C to +85 °C 0 °C to +70 °C
Cable type Multimode Singlemode Singlemode Multimode Singlemode Singlemode Copper
Wiring type Ethernet 100Base FX Ethernet 100Base FX Ethernet 100Base FX Gigabit Ethernet
at 1.25 Gbps
Gigabit Ethernet
at 1.25 Gbps
Gigabit Ethernet
at 1.25 Gbps
Ethernet 1000Base-T
Here, the two-gigabit SFP (small form-factor pluggable)
slots offer optimal flexibility. Weidmüller offers a wide variety
of pluggable SFP transceivers with LC plugging systems.
These range from single-mode versions with a 2-km range to
multi-mode solutions with a 120-km maximum cable-length
range.
When you are using fibre transceivers, SFPs offer you the
maximum in flexibility.
B.25
B
Unmanaged switch, Advanced Line Gigabit
145 mm
5.7"
156 mm6.14"
13.46 mm.530"
Allow 3.25" (82.55 mm)
for Fiber Optic Cable.
44 mm
1.75"
% \ "
Unmanaged switch, Advanced Line Gigabit Ordering data
Number of ports Type Order No.
8961230000
8966140000
8975450000
Accessories
Type Order No.
8813490000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches without management functions
Ac
tive
co
mp
on
en
ts
B
B.26
Switches with management functions
Introduction Managed switches
Production facility
CU
Production facility
Production facility
Production facility
Trunking
Slave Slave
SlaveSlave Master Master
RapidRing™ID:2
RapidRing™ID:1
FOFO
The decentralised structure of industrial networks means that
many applications require a central switch in the switching
cabinet. A Weidmüller IE-SWxx-M high-performance Industrial
Ethernet managed switch is ideal for such applications.
The AdvancedLine managed switches are enclosed in a strong
aluminium housing. Connections are available for power supply,
relay contact and signalling contacts. The device also features
optionally 8, 16, or 24 Ethernet ports. Up to two of these are
fibre-optic ports for single-mode or multi-mode cable.
The WaveLine managed switches feature up to eight ports in a
very small space enclosed in a compact plastic housing. They are
available with or without I/Os.
LEDs on the front provide the necessary optical indications. The
port LEDs remain permanently on to indicate a connection and
flash during data transmissions. Furthermore, they change colour
to indicate the data rate: green indicates 100 Mbps and yellow
10 Mbps. The green “Power” LED remains on permanently to
indicate a constant power supply. The green “Status” LED is
normally permanently green, but switches to red to signal a fault,
provided the “Link monitoring” function is active.
Weidmüller’s managed switches enable industry networks to be
optimally structured for handling transport routes and network
traffic throughput. The individual network components are
interconnected in a hierarchical, physical star-type network.
The main distributor, in this case a high-performance Industrial
Ethernet switch, represents the central switching point in this
network.
All switches from Weidmüller are protocol-transparent. Every port
forms its own network segment, its own collision domain. The entire
network bandwidth is available to each one of these segments. This
increases not only the network performance across the entire
network, but also in every individual segment. The switch examines
every incoming packet for the MAC address of the destination
segment and can then forward it directly to its destination.
The great advantage of Weidmüller switches is their ability to
interconnect their ports directly.
Port-Trunking
Port-Trunking enables users to combine two or more ports on two
Ethernet devices to form a group. This group then behaves like a
“single logical link”, but with a correspondingly higher data rate.
Furthermore, port trunking provides redundancies with a very fast
Ac
tive
co
mp
on
en
ts
B
B.27
Switches with management functions
VLAN 1 CU
FO
VLAN 2
recovery time. If a link in the trunk group fails, the remaining links
take over immediately in order to maintain the data exchange
between the two switches.
Port-Mirroring
Port mirroring enables users to mirror – in other words copy –
at one port all the data transmitted or received at one or more,
other ports of the Managed Switches. The messages sent to the
mirrored port can be filtered, e.g. by way of MAC addresses.
VLAN
The abbreviation VLAN stands for “Virtual Local Area Network”.
This is a network structure with all the properties of a conventional
LAN, but without any physical connections. VLANs are generally
switched networks that can link more remote nodes to form a
virtual local network. The VLAN function enables a network to be
split into various segments. It is possible to combine servers and
workstations into dynamic workgroups according to their function.
VLANs can be set up transparently and without any physical
changes to the network and can be configured like multiple virtual
local networks.
VLANs are broadcast domains that can also extend over several
switches. The broadcast traffic is then only visible in the respective
VLAN. This possibility of completely isolating VLANs from one
another helps to increase the security of data transmissions.
Consequently, the data is sent only to the Ethernet devices within
one VLAN group. Once the VLAN function has been activated, a
VLAN frame can be sent only to one port belonging to this VLAN
within the VLAN. If the destination port belongs to a different VLAN,
the frame is deleted. It is also possible to assign a port to several
VLANs simultaneously. This type of structure enables networks to
share one router or server.
VLANs combine the advantages of bridges and routers.
Consequently, it is easy to add, delete or modify a station.
Furthermore, the network can have any structure. For example, it is
possible to set up virtual user groups. It is no longer
necessary to assign users to various subnetworks just because
of the great physical distances between them. Servers housed in
central locations can be assigned to distant workgroups.
IE-SWxx-M switches support two types of VLAN:
Managed switches also permit static entries in addition to the
“learning” of addresses in the forwarding table or the address
table. These entries remain in the table permanently and are not
subject to the aging process.
Ac
tive
co
mp
on
en
ts
B
B.28
Switches with management functions
IGMP Snooping groups
CU
Operator front-end
PLC
I/O
I/O
CU
CU
CU
CU
Quality of Service
The Quality of Service (QoS) function permits a QoS priority to
be used in every Ethernet frame. The priority depends on the
port from which the frame originates.
Differential relay
The AdvancedLine managed switches also feature a relay
connection. This can be used to monitor individual events on the
network. The relay can signal an outage or the presence of a link
on one or multiple ports.
Browse Address Table
The “browse address table” function enables the display of the
entire address table or the localisation of a MAC address. Select
the type of search (sequence or MAC address) and afterwards the
“find” function. This function is useful for obtaining an overview of
all MAC addresses. The ports belonging to the MAC addresses
are also displayed.
SNMP-Management
The SNMP protocol enables the monitoring, controlling and
administration of networks. According to the model of SNMP
architecture, the network is divided into network management
stations and network components. The network management
stations host applications for the monitor and control of network
components.
IGMP-Snooping
IGMP snooping controls the switch when join requests appear on
the port for a multicast group. When this happens, the particular
port is incorporated into the forward table for this group. This
reduces the net load, since the switch does not flood all ports with
multicast traffic.
DHCP Client
Specially-configured servers, such as Weidmüller‘s Router Series,
can assign dynamic IP addresses and other network parameters
to network components. This is done with the DHCP protocol
(Dynamic Host Configuration Protocol). Our managed switches
can either receive a fixed, static IP address, or a DHCP server can
assign them an IP address.
Diffserv
When using Diffserv (Differentiated Services), every IP packet is
tested to determine its priority. In contrast to the Quality of Service,
the priority is already determined here by the sender. Thus the
path to the receiver is optimized and forwarded with preference.
Ac
tive
co
mp
on
en
ts
B
B.29
Switches with management functions
Our WaveLine switches come optionally with two digital IOs (input
and output). After the IOs are configured, network parameters can
be monitored with the managed switch. An uninterruptible power
supply (UPS) can also be connected to the IOs. If the supply
voltage fails, the switch changes over to the battery on the UPS.
The signal output wired to the WaveLine managed switch can
issue an SNMP trap to a Scada system running on a network
server. In addition, the IO output activates an alarm light on the
outside of the electrical cabinet so that the power outage can be
easily seen. No PLC is required.
WaveLine managed switches with IOs
Uninterruptible
power supply
SNMP Trap
Digital
Input
Digital
Output
Production facility
Alarm light
Production facility
Ac
tive
co
mp
on
en
ts
B
B.30
Switches with management functions
Redundancy in the Industrial Ethernet
Two schemes have become established for achieving network
redundancy in Industrial Ethernet applications.
Ring topology is the simplest and quickest way of achieving net-
work redundancy. The lack of a standard led to the development
of RapidRing™ technology. This provides industrial automation
engineers with a simple and effective way of achieving redun-
dancy. RapidRing™ provides redundancy against a single fault.
The devices combined to form a ring are wired like a real logical
ring. As the ring structure would lead to a loop in the network,
one link is logically deactivated (backup link).
The IEEE standard “Rapid Spanning Tree Protocol” (RSTP,
IEEE 802.3w) is the other option for achieving redundancy in
a network. RSTP renders possible a net-like structure which
enables multiple redundancy to be achieved. RSTP is not as
easy to use as RapidRing™, but RSTP does offer many
interesting options.
Both systems have their advantages in particular applications.
In industrial automation it is often very simple to wire ring
structures. Operating RSTP in a ring of 15 or more switches
will lead to unsatisfactory data rates. But the use of RapidRing™
in such an installation results in switching times < 300 ms, and
larger rings are also possible.
RapidRing™ is easy to use. Firstly, one switch is selected to be
the master and is configured as such. The other switches in the
network are configured as slaves. Ports 1 and 2 are always
used to connect the ring. Port 1 of one switch is connected to
port 2 of the next switch in the redundant ring. This connection
scheme leads to a logical ring. After switching on the network,
the network is ready for operation.
The backup link is always connected to port 2 of the master
switch, which allows the backup links to be predefined. The
master can therefore be chosen to optimise the network
throughput. If a connection in the ring is interrupted, the backup
link takes over its function and so communications are not
subjected to long interruptions. Once the defective link has
been restored, the backup link is automatically deactivated.
The status of the ring can be interrogated via the Web server
of every switch involved. MIB data is made available via the
SNMP for remote interrogation and automatic processing in
a dedicated section.
The RSTP standard is a further development of the Spanning
Tree Protocol (STP, IEEE 802.1D). The RSTP configures the
network in such a way that there are no loops. Various redun-
dant connections (backup links) offer multiple redundancy. The
switches connected to the RSTP exchange information via the
network in Bridge Protocol Data Units (BPDU). An interrupted
link is therefore quickly replaced. Modifications within the
network are detected automatically.
RSTP is ideal for complex networks with more than one connec-
tion. As several possible paths exist in the network, RSTP must
always analyse the network fully. That leads to switchover times
> 300 ms. Indeed, in large and complex networks the switchover
time can run into several seconds.
A network with RSTP should be very carefully planned and
conceived, otherwise unexpected behaviour could be the result.
Ac
tive
co
mp
on
en
ts
B
B.31
Switches with management functions
Configuration
IE-SWxx-M managed switches can be configured with a terminal
program but also via a Web interface at the integral, interactive
Web server. Every Internet-compatible PC in the local network
can have access to this Web server. The Web server is compa-
tible with the latest versions of Internet Explorer (7.0 or higher)
and Firefox (3 or higher). This method of confi guration enables
remote switches to be configured.
The following settings are possible:
or disabled
SNMP traps are messages that are transmitted when a “trap
event” occurs. Up to four trap receivers can be specified. The
IE-SWxx-M switches support traps for the link-up, link-down,
confirmation error, cold restart and warm restart functions.
Refer to Chapter W for a description of the connection
possibilities for redundant power supplies.
The IE-SWxx-M managed switches can be monitored via SNMP
and console menus. The following are just some of the functions
available:
Port error packets statistics can be generated for every port.
This contains information regarding:
B.32
B
WaveLine Managed Switches
45
129
108
% \ " u
WaveLine Managed Switches
Note
Ordering data
Number of ports
Note
Type Order No.
8943790000
1067880000
8943800000
8943820000
8943810000
8943780000
Accessories
Type Order No.
8813490000
1609880000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches with management functions
B.33
B
WaveLine managed switch IOs
45
129
108
% \ " u
WaveLine managed switch IOs
Note
Ordering data
Number of ports
Note
Type Order No.
8972580000
1067870000
8972600000
8972590000
8972570000
Accessories
Type Order No.
8813490000
1609880000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches with management functions
B.34
B
Managed switch, with 8 to 24 ports
9 mm
.35”
TS
-35 D
IN-R
ail
79 mm
3.1” 156 mm
6.14”
14 mm
.530”
Allow 3.25” (85 mm)
for Fiber Optic Cable.
% \ "
u
Managed switch, with 8 to 24 ports Ordering data
Number of ports Type Order No.
8845840000
8851850000
8845850000
8845740000
8845780000
8851860000
8845790000
8845800000
8845810000
8851870000
8845820000
8845830000
Accessories
Type Order No.
8813490000
8866660000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Switches with management functions
B.35
B
Ac
tive
co
mp
on
en
ts
Ac
tive
co
mp
on
en
ts
B
B.36
IP67 switches
8-port switch in IP67
Switches are the central components of a network. They prevent
data collision, allow rapid packet switching and enhance data
throughput. Not only do Weidmüller switches meet the demands
placed on the Fast Ethernet with its transmission rate of up
to 100 Mbit/s, but they are also downward compatible with
the older networks that have a transmission rate of 10 Mbit/s
(IEEE 802.3). They recognise the speed automatically.
Weidmüller’s unmanaged switches are Plug & Play devices for
easy installation of Ethernet networks. They do not need to be
either configured or parameterised.
Weidmüller’s managed switches enable industry networks to
be structured in order to optimise transport routes and times
for network traffic. The various network components are cabled
together hierarchically in a physical star. The main distributor in
the field, in this case the Industrial Ethernet switch
IE-SW-8-M-IP67, is the central switching point. All Weidmüller
switches are protocol transparent. Each port forms both a
network segment and a collision domain that are intrinsic to the
port itself. The entire network bandwidth is available to each of
these segments. This results in enhanced network performance
not only over the network as a whole, but also in each individual
segment. The switch examines each packet passing through for
the MAC address of the target segment and is able to forward
it directly there.
Just 54 mm wide
One LED per port for link /
speed / data
Fault relay:
1 x M12 A-coded, 5-pole (24 V DC / 1 A)
Two MultiCard markers or
one long 40-mm marker
for labelling the IP address
2-hole mounting and
functional earth terminal
8 x M12 D-coded, 4-pole
Serial interface (RS232):
1 x M12 B-coded, 5-pole
Redundant voltage supply
2 x M12 A-coded, 5-pole
Ac
tive
co
mp
on
en
ts
B
B.37
IP67 switches
For direct connection to the network in the field, Weidmüller
offers an IP 67 switch with eight Ethernet ports for use in tough
environments.
in the field, complying with UL94 flammability rating V0
The features of the managed IP67 switch from Weidmüller
include the following:
Stock control with the Weidmüller Industrial Ethernet Switches in IP67
RapidRing™
Dispatching station 2
Dispatching station 4
Stock
Dispatching station 1 Dispatching station 3
Managed Switch
Managed SwitchManaged Switch
Unmanaged Switch
B.38
B
IP 67 unmanaged switch
210
2015
54
30,7
5
42
% \ "
IP 67 unmanaged switch Ordering data
Number of ports Type Order No.
8877190000
Accessories
Type Order No.
2330260000
1912130000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
IP 67 switches
B.39
B
IP 67 managed switch
210
2015
54
30,7
5
42
% \ "
IP 67 managed switch Ordering data
Number of ports Type Order No.
8877200000
Accessories
Type Order No.
2330260000
8874290000
1912130000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
IP 67 switches
Ac
tive
co
mp
on
en
ts
B
B.40
Decentralised I/O remotes
The EtherNet/IP system
Max. bus extension (m) Data rate (Mbps)
100 10
100 100
Principle
EtherNet/IP (Ethernet Industrial Protocol) is an open standard
that was developed by Rockwell Automation and the Open
DeviceNet Vendor Association (ODVA) for industrial networks.
EtherNet/IP is based on the Ethernet TCP/IP standards and
the Common Industrial Protocol (CIP).
CIP an open standard that is implemented in ISO layer 7, and
is also used for ControlNet™ and DeviceNet™ installations.
This enables continuous communications between the field
level and the Internet. The protocol includes a control
component for cyclic, real-time-compatible I/O signal
transmission (implicit messaging) and an information
component for the configuration, diagnosis and management
messages (explicit messaging).
The I/O data uses the User Datagram Protocol/Internet Protocol
(UDP/IP) and the information data uses TCP/IP protocols.
The IEEE802.3 standard is incremented on layers 1 and 2
(physical media and data link respectively).
Addressing
The Dynamic Host Configuration Protocol (DHCP) is used to
assign addresses to modules in EtherNet/IP networks.
Network structure
Like Standard Ethernet, EtherNet/IP installations are also wired
with a star structure. The star structure is characterised by a
central signal distributor (switch) with individual connections to
all the network’s terminals. A line or tree structure can be set up
with the help of a 3-port switch in the device or in the proximity
of each device.
Weidmüller can supply products for the network infrastructure –
please refer to our Industrial Ethernet catalogue.
Transmission rate
The transmission rate is 10 or 100 Mbps. Weidmüller modules
detect the transmission rate automatically and set themselves
accordingly. The maximum length of the bus cable is the same
for both transmission rates.
The following table can serve as a guide for bus installations
complying with the standard:
Ac
tive
co
mp
on
en
ts
B
B.41
Decentralised I/O remotes
EtherNet/IP Universal
Ordering data
IO variants
16 digital inputs
16 digital inputs / 8 digital outputs
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Information
Type Qty. Order No.
SAI-AU M8 EIP 16DI 1 1906930000
SAI-AU M8 EIP 16DI/8DO 1 1906940000
Technical data bus system
Bus sharing unit Server
Transmission rate 10 / 100 Mbps
Diagnostic display red
Fieldbus interface IEEE 802.3
Electrical isolation available yes
Station addresses via DHCP
bps rate automatic
Technical data
General data
Insulation material of housing PBT
Flammability class UL 94 V-0
Operation temperature 0 °C ... 55 °C
Storage temperature -25 °C ... 70 °C
Ingress protection class IP 67
Electrical data electronics-module
Operating voltage 24,0 V DC (18...30 V)
Max. current carrying capacity per output signal 0,5, 2,0 A
Output levels Short-circuit-protected
Total current. max. 8 A
Digital inputs TYPE1 to EN61131-2
Analogue outputs -10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
Analogue inputs -10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
Resolution 12 Bit
Accuracy < 0,2 %
Information UL certification in preparation
Accessories
Plug
Metal plug Ethernet, pin M12, D-coded, straight
Metal plug Ethernet, socket M12, D-coded, straight
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
Type Qty. Order No.
SAISM-4/8S-M12-4P D-COD 1 1892120000
SAIBM-4/8S-M12-4P D-COD 1 1892130000
ESG 8/13.5/43.3 SAI AU 5 1912130000
SAI-SK M8 50 1802760000
SAI-SK-M12-UNI 20 2330260000
Information Voltage supply with standard M12 plug-in connectors (see catalogue)
M8
SAI-AU SAI-AU
M12
Type Qty. Order No.
SAI-AU M12 EIP 16DI 1 1906900000
SAI-AU M12 EIP 16DI/8DO 1 1906910000
SAI-AU M12 EIP AI/AO/DI 1 1906920000
Ac
tive
co
mp
on
en
ts
B
B.42
Decentralised I/O remotes
Modbus TCP
Max. bus extension (m) Data rate (Mbps)
100 10
100 100
Principle
Modbus TCP is a fieldbus system for automation technology
based on Ethernet TCP/IP. It has been accepted by the Internet
Engineering Task Force (IETF) as a draft RFC standard and has
been made available for all to use by Schneider Automation.
Modbus TCP is based on Modbus, a well established industrial
application protocol. The Modbus object models remain
unchanged.
A connection is set up via TCP/IP by the server (e.g. I/O
device) being addressed via port number 502. Commands are
initiated by the client (Master) and executed by the server (slave).
The length of a Modbus telegram is max. 256 bytes.
Network structure
Like Standard Ethernet, Modbus TCP installations are also wired
with a star structure. The star structure is characterized by a
central signal distributor (switch) with individual connections to
all the network’s terminals. A line or tree structure can be set up
with the help of a 3-port switch in the device or in the proximity
of each device.
Weidmüller can supply products for the network infrastructure –
please refer to our Industrial Ethernet catalogue.
Addressing
The addressing is carried out via a BOOTP (Internet Bootstrap
Protocol) inquiry via the client, using the Dynamic Host
Configuration Protocol (DHCP), or the user can set the IP
address with a software tool.
Bus extension/transmission rate
The transmission rate is 10 or 100 Mbps. Weidmüller modules
detect the transmission rate automatically and set themselves
accordingly. The maximum length of the bus cable is the same
for both transmission rates.
The following table can serve as a guide for bus installations
complying with the standard:
Ac
tive
co
mp
on
en
ts
B
B.43
Decentralised I/O remotes
Modbus TCP Universal
Ordering data
IO variants
16 digital inputs
16 digital inputs / 8 digital outputs
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Information
Type Qty. Order No.
SAI-AU M8 IE 16DI 1 1906880000
SAI-AU M8 IE 16DI/8DO 1 1906890000
Technical data bus system
Bus sharing unit Server
Transmission rate 10 / 100 Mbps
Diagnostic display red
Fieldbus interface IEEE 802.3
Electrical isolation available yes
Station addresses via DHCP
bps rate automatic
Technical data
General data
Insulation material of housing PBT
Flammability class UL 94 V-0
Operation temperature 0 °C ... 55 °C
Storage temperature -25 °C ... 70 °C
Ingress protection class IP 67
Electrical data electronics-module
Operating voltage 24,0 V DC (18...30 V)
Max. current carrying capacity per output signal 0,5, 2,0 A
Output levels Short-circuit-protected
Total current. max. 8 A
Digital inputs TYPE1 to EN61131-2
Analogue outputs -10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
Analogue inputs -10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
Resolution 12 Bit
Accuracy < 0,2 %
Information UL certification in preparation
Accessories
Plug
Metal plug Ethernet, pin M12, D-coded, straight
Metal plug Ethernet, socket M12, D-coded, straight
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
Type Qty. Order No.
SAISM-4/8S-M12-4P D-COD 1 1892120000
SAIBM-4/8S-M12-4P D-COD 1 1892130000
ESG 8/13.5/43.3 SAI AU 5 1912130000
SAI-SK M8 50 1802760000
SAI-SK-M12-UNI 20 2330260000
Information Voltage supply with standard M12 plug-in connectors (see catalogue)
M8
SAI-AU SAI-AU
M12
Type Qty. Order No.
SAI-AU M12 IE 16DI 1 1906850000
SAI-AU M12 IE 16DI/8DO 1 1906860000
SAI-AU M12 IE AI/AO/DI 1 1906870000
Ac
tive
co
mp
on
en
ts
B
B.44
Decentralised I/O remotes
Principal function
PROFINET is the open Industrial Ethernet standard for
automation from PROFIBUS & PROFINET International (PI).
Profinet implements TCP/IP and IT standards. It is capable of
real-time Ethernet and can integrate fieldbus systems.
The Profinet design is distinguished mainly by the type of data
exchange used to meet the speed requirements.
The are two Profinet perspectives – Profinet-CBA and
Profinet-IO:
component-based communications via TCP/IP and real-time
communications for the real-time demands of modular systems
engineering. Both communication channels can be used in
parallel.
synchronous communication (IRT: isynchronous real-time)
with decentralized peripheral devices. The designations RT
and IRT only describe the real-time characteristics of the
communication within the Profinet-IO.
Process data and alarms within the Profinet-IO are always
transmitted in real time (RT). Profinet „real time“ is based on the
definition from the IEEE and IEC. This specifies that only a
limited time is allowed within a bus cycle for the execution of
real-time services.
This RT communication is the basis for Profinet-IO data
exchange. Real-time data is handled with a higher priority than
TCP(UDP)/IP data packets. RT is the foundation for real-time
communications in the decentralized peripheral zone. Bus cycle
times in the 2–6 ms range are possible with this data exchange
mechanism.
Addressing
Module addresses for the Profinet-IO are assigned automatically
using DCP (the discovery configuration protocol).
Network structure
With the integration of a managed, two-port switch in all Profinet
modules, it is then possible to implement linear, star or tree
network topologies.
Transmission rate
The transmission rate is 100 Mbit/s. The maximum segment
length is 100 m.
PROFINET system description
Ac
tive
co
mp
on
en
ts
B
B.45
Decentralised I/O remotes
PROFINET Universal
Ordering data
IO variants
16 digital inputs
16 digital inputs / 8 digital outputs
4 analogue inputs / 2 analogue outputs / 4 digital inputs
Information
Type Qty. Order No.
SAI-AU M8 PN 16DIM 1 1019310000
SAI-AU M8 PN 16DI/8DOM 1 1019320000
Technical data bus system
Bus sharing unit Server
Transmission rate 100 Mbps
Diagnostic display red
Fieldbus interface IEEE 802.3
Electrical isolation available yes
Station addresses via DHCP
bps rate automatic
Technical data
General data
Insulation material of housing PBT
Flammability class UL 94 V-0
Operation temperature 0 °C ... 55 °C
Storage temperature -25 °C ... 70 °C
Ingress protection class IP 67
Electrical data electronics-module
Operating voltage 24,0 V DC (18...30 V)
Max. current carrying capacity per output signal 2,0 A
Output levels Short-circuit-protected
Total current. max. 8 A
Digital inputs TYPE1 to EN61131-2
Analogue outputs -10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
Analogue inputs -10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA
Resolution 12 Bit
Accuracy < 0,2 %
Information
Accessories
Plug
Metal plug Ethernet, pin M12, D-coded, straight
Metal plug Ethernet, socket M12, D-coded, straight
Miscellaneous accessories
Marker, transparent
M8 protective cap
M12 protective cap
Type Qty. Order No.
SAISM-4/8S-M12-4P D-COD 1 1892120000
SAIBM-4/8S-M12-4P D-COD 1 1892130000
ESG 8/13.5/43.3 SAI AU 5 1912130000
SAI-SK M8 50 1802760000
SAI-SK-M12-UNI 20 2330260000
Information
M8
SAI-AU SAI-AU
M12
Type Qty. Order No.
SAI-AU M12 PN 16DIM 1 1019270000
SAI-AU M12 PN 16DI/8DOM 1 1019280000
SAI-AU M12PN4/2AIO4DIOM 1 1019290000
Ac
tive
co
mp
on
en
ts
B
B.46
Security Router
Routers – the gateways between Ethernet worlds
Suppose that you are at your place of work in Stuttgart and
need to compare the indicator data sets coming from your
manufacturing sites in the Middle East. You then dial in,
download the data, save it on your password-protected system
and then you‘re ready. But how can you be sure that you are the
only person who is currently accessing this data? Information
transmitted over the Internet is just as safe as a message in a
bottle.
Anyone with a bit of know-how can capture this data and you
may never have the slightest clue of this abuse.Damages
resulting from spying, sabotage and other abuse of sensitive
data have already reached unprecedented levels. Should we
then avoid using public networks all together for industrial
uses?We at Weidmüller have worked on this problem in depth.
We have developed a new technology that provides smart and
reliable defence against external dangers.We have created a
new data communication path which establishes a new level of
security, reliability and user-friendliness.
The two typical applications for routers are:
to simplify configuration
Separation of Ethernet networks in the factory
An industrial manufacturing network or an industrial machine
network and a typical office network use the same Ethernet
standard but are nevertheless totally different. Whereas in the
office network larger volumes of data and the associated
sluggishness of the network is completely acceptable, an
excessively long response time in an industrial network can lead
to downtimes and malfunctions. Complete isolation of the two
networks is inadvisable, and for the first time there is the chance
of using the same network for all procedures in the company.
Procedures become more transparent, the management and
technical workloads can be reduced. The exchange of data is
considerably simplified and decidedly more efficient.
There are many options for isolating and prioritising network
data, e.g. VLAN, QoS for layer 2, etc. A router can provide an
option for filtering the data on the IP layer (layer 3). Features
such as integral firewall, Network Address Translation (NAT),
Port Address Translation (PAT) and remote access via a
modem turn such a router into an efficient aid for achieving
separation between networks.
Only authorised users can access the protected network from
outside and only certain, enabled devices can transmit data
out of the protected network. The NAT/PAT feature enables a
machine with its own IP subnetwork and several network users
to remain concealed from the outside world behind a unique IP
address. Access routines to the IP address from outside are
automatically forwarded to a predefined IP address in the
network behind the router. In this way the device can remain
accessible from outside but only as required. The option of
concealing a complete machine behind an IP address reduces
the installation and management workloads for the machine
user.
In addition, the router can be selected via an external modem,
thus enabling access to the router and the machine beyond,
without compromising the corporate network. Such access
routines are carried out via PPP and PAP or Callback with
Virtual Private Network (VPN). This means that a high security
level can always be guaranteed.
Ac
tive
co
mp
on
en
ts
B
B.47
Security Router
One for all -
The Weidmüller „Configurator“ Device Management Tool
Managing the firmware updates or backing up configurations
for a variety of different devices can be a problematic and slow
undertaking. Device manufacturers offer different utilities for
their different product lines, and these often have differing user
interfaces.
In order to solve this problem, Weidmüller has introduced the
„Configurator“ device management tool. It serves as a general
foundation for managing and configuring WaveLine routers and
a variety of other devices.
To briefly summarize, the Configurator enables:
datasheets
The Configurator is available for Windows and Linux. It
requires no installation. The software can simply be unpacked
and started. The only system requirement is that you have Java
Runtime, version 1.5 or later, installed.
The configurator organizes data into projects. A project can
consist of multiple locations which can represent the structure of
the current facility structure or differing workshops. The software
also enables devices to be grouped together in logical groups.
You can represent these groups in a logical structure, with
classifications such as „All border routers from manufacturing
units“. The Configurator presents a shared „look and feel“ for the
central management of firmware and configurations. It can be
used for a large number of the industrial Ethernet products from
Weidmüller. The administrator can then focus on the complete
management of the network. He must no longer be worried
about the particulars for each individual tool.
Refer to Chapter W for a description of the connection
possibilities for redundant power supplies.
Ac
tive
co
mp
on
en
ts
B
B.48
Security Router
Routers – gateways between Ethernet worldsWe Bring Top-level Security to the Net
Industrial networks and office networks run on the same
Ethernet standards, and yet they are totally different:
while large amounts of data and, as a result, a certain
“inertia” of the network are totally acceptable in office
networks, excessive response times may lead to stalling,
errors, hence to the generation of considerable costs, in
industrial networks.
Communication networks used for office applications and for
automation are converging. The advantages that result from this
process are put into practice more and more frequently because
they make procedures more transparent and facilitate data
exchange substantially.
Weidmüller Industrial Routers ensure that different networks
interoperate in unison and with top-level security.
Customer’s Network
Router Configurator: remote access from around the
world to your router for maintenance and support
To customize the routers in order to get the optimum out of
them, you can choose to tailor them exactly to your needs via
a web browser, via SNMP, or using Weidmüller’s management
software called “Configurator.”
The “Configurator” allows reliable remote maintenance of your
systems around the world. Updating the software on a full set
of routers, supporting and managing their performance is done
conveniently and securely from your office.
The Security Datasheet
... assists you with the configuration. It describes the way the
firewall has to behave to ensure that the connected systems
can work normally. You no longer need to worry about technical
details, such as ports. The configuration software does this job
for you. A few mouse clicks is all it takes to have your firewall
ready for operation.
Intelligent Firewall: Stateful Package Inspection
Our routers ship with firewalls that adapt automatically to the
network traffic they see (Stateful Package Inspection). They
recognize the messages that are stateful, i.e., legitimized,
and let them pass. Unidentified packets are kept out of your
industrial networks.
Private Network 192.168.1.0
Private Network 192.168.1.0
Private Network 192.168.1.0
Production System in a
Protected Industrial Network
Production System in a
Protected Industrial Network
Production System in a
Protected Industrial Network
WWW.
Firewall
Firewall
Firewall
Ac
tive
co
mp
on
en
ts
B
B.49
Security Router
Bodily Search at the Point of Entry:IPsec Encryption for Virtual Private Networks (VPN)
To frustrate eavesdroppers,
the router transmits your data encrypted.
Weidmüller Routers for VPNs enable access to components
from around the world with IPSec-encrypted procedures, thus
ensuring top-level security with minimum effort.
Pathfinder on the net: OSPF (Open Shortest Path First)
OSPF is the dynamic routing protocol within a system that
describes the status of the gateways connecting to data
networks. The salient feature of the protocol is its rapid and
dynamic response to changes in the network structure.
Customer’s Network www Firewall Production System
Port forwarding, NAT, and masquerading
The router is capable of translating addresses between
networks. That’s how, for instance, all devices of one system
can be masqueraded behind a single router. Someone attacking
over the network (e.g., the internet) can see only the router,
while all the devices behind it are hidden from the outside world
to protect them.
Weidmüller’s innovative router technologies are there to avoid
that your data have “queue up.” OSPF is the reliable and
timesaving web guide that takes your data to their destination
in the most efficient way at any moment.
Private Industrial Network Public Network Customer’s Network Private Industrial Network
192.168.1.0 10.1.94.0 192.168.1.0
www Customer’s
Network
VPN: private, IPSec-encrypted
communication tunnel
Firewall
Production System
Ac
tive
co
mp
on
en
ts
B
B.50
Security Router
Virtual Mapping with Weidmüller’s Router
Additional Features for Convenient Data Communications
Virtual mapping—or, NAT—enables you to operate simultaneously
several identically configured networks behind routers equipped
with NAT capabilities. The system engineer can hide the system
behind the router and needs not adjust its IP configuration. This
Modem
Weidmüller Routers support modem connections for dial up
connections to the router. This feature is extremely valuable
for remote maintenance in situations where a direct connection
of the network to the internet is undesired. Different types
with built-in Analog-, ISDN- or GSM-modem are available,
alternatively an external modem can be connected.
Highspeed Routing
Based on his high performance architecture the Router is able
to forward data with nearly wire speed (100 Mbit/s). This is an
important feature for high speed applications and applications
with large data volumes.
The advantage of virtual mapping:
Two or more machine networks with the same configuration
can be connected to a superordinated network without any
changes.
allows using the system with the same configuration over and
over again. NAT is required as an alternative to port suffixes
Integrated Servers
The router provides additional network functionalities that
normally require a separate computer, for example automatic
addressing and automatic time serving and synchronization.
Dial on Demand and Callback
When a router is used to connect a network to the internet over
a modem, Dial on Demand comes in handy to cut costs. In this
configuration the router establishes a connection only when a
device in the network wants to download data from the internet.
When it is done, the router disconnects automatically.
Callback is often used for remote maintenance purposes. The
router dials a preset phone number, e.g., that of the system
manufacturer‘s service center. This means that the dial-up costs
are borne by the customer.
Production System 1
Production System 2
Office
Ac
tive
co
mp
on
en
ts
B
B.51
Security Router
Port forwarding enables the exchange of IP packets between target addresses and ports.
LAN 1 LAN 2
Dropped
Firewall
192.168.1.100
192.168.1.100:5011
192.168.2.11:5011
192.168.2.12:80
192.168.2.13
192.168.1.100:5012
1
2
Target addresses and ports for the IP packets are exchanged
IP addresses: Assigned IP addresses:
router ports on Ethernet 1 ports in LAN 2
192.168.1.100
192.168.1.101:5011 192.168.2.11:5011
192.168.1.102:5012 192.168.2.12:80
Port forwarding with Weidmüller‘s Router
– Combining the IP address of a router interface with any
virtual port,
– Assigning an IP address / port combination to an actually-
available IP address and port from the other network
(connected via the router)
then immediately forwarded to the assigned IP addresses.
router to the requesting agent.
Ac
tive
co
mp
on
en
ts
B
B.52
Security Router
Virtual Mapping – NAT
Type Network Address Translations (NAT), exact destination
NAT = DNAT target address of the IP packet is exchanged
IP addresses of the router Assigned IP address
on Ethernet in LAN 2
192.168.1.100
192.168.1.101 192.168.2.11
192.168.1.102 192.168.2.12
LAN 1 LAN 2
Dropped
Firewall
192.168.1.100
192.168.1.101
192.168.2.11
192.168.2.12
192.168.2.13
192.168.1.102
1
2
Ac
tive
co
mp
on
en
ts
B
B.53
Security Router
Virtual mapping with the Weidmüller miniRouter
– Allocation of additional IP addresses to a network interface,
– IP addresses must all come from the same network as the
actual router IP address on the selected network interface,
– Allocation of additional IP addresses to an actually-available
IP address from another network
(connected via the router)
immediately forwarded to the assigned IP addresses
the router to the requesting agent
The advantages of virtual mapping:
– enables parallel operation of multiple identically-configured
networks behind NAT-technology routers
– Machine builders can hide machines behind a router
without needing to change the IP configuration,
– It is possible to always use the machines with the
identical configuration
– NAT as an alternative to port forwarding; necessary for
applications which can not form requests combining IP
addresses with port numbers (for example, some PLC
applications)
1
2
1
2
Advantage of virtual mapping:two identical production networks connected to one office network
Dropped
192.168.1.200
192.168.1.201
Manufacture 2
192.168.2.11
192.168.2.12
Manufacture 1
192.168.2.11
192.168.2.12
Office
192.168.1.40
192.168.1.43
192.168.1.202
192.168.1.100
192.168.1.101192.168.1.102
Ac
tive
co
mp
on
en
ts
B
B.54
WaveLine router with digital IOs
Security Router
Our line of WaveLine routers are optionally available with digital
IOs. By means of digital inputs direct on the router, a service
request (for example) can be triggered directly by the machine
operator. The user can now switch the digital IOs with the press
of a button. The router can then dial up to the Internet if
necessary to deliver the alert.
It is also possible to use the digital input to completely lock the
WLAN port. With just the press of a button you can deactivate
all traffic with networks located behind the router. The required
parameters can be set using our Weidmüller Device
Configurator or using the web interface to the router
configuration.
HMI
Camera
Customer net
(WAN) Digital Input
Service request
Lock WAN
PLC
B.55
B
Wave 100T
45
129
108
% \ "
Wave 100T Ordering data
Number of ports
2x RJ45, 2x DI/DO, 1x USB, 1x RS232
2x RJ45, 2x DI/DO, 1x USB, 1x RS232
2x RJ45, 2x DI/DO, 1x USB, 1x RS232
Type Order No.
IE-AR-100T-WAVE 8943830000
IE-AR-100T-AN-WAVE 8943850000
IE-AR-100T-ISDN-WAVE 8943840000
Accessories
Type Order No.
8813490000
1609880000
Note
Technical data
5 W
TS 35
IP 20
Note:
Ac
tive
co
mp
on
en
ts
Security router
Ac
tive
co
mp
on
en
ts
B
B.56
Industrial Wireless
The GPRS alarm module
The IE-GPRS-I/O is a suitable choice for all those who wish to
access facility or plant data from mobile devices or from the
Internet. Some examples are:
facility at any time, even when you are not on site? You can
choose to receive an SMS, a fax or an e-mail
conditions arise in the plant, even when there is nobody on
site? The IE GPRS I/O can automatically send, for example,
to control your plant from virtually anywhere in the world and
allows you round-the-clock access to your plant
is unreachable by land-line or network? The IE-GPRS-I/O can
be installed wherever GSM mobile radio network reception is
are always accessible via a secure Internet link, are another
possible option that would eliminate the need for an expensive
means that you can avoid the installation of a land-line phone
link and the associated transmission costs.
In today‘s production facilities, it is often the case that only a
of your devices to be online all the time. No matter where your
personnel may be, the machine is reachable around the clock.
The IE-GPRS-I/O is also an attractive choice for manufacturers
of machinery and plants. Mobile access to the facility or plant
allows you to provide speedy and effective support to your
personnel of your customers. Often this can save you the
customer relations.
Just like most of our active communication devices, the
cabinet.
Refer to Chapter W for a description of the connection
possibilities for redundant power supplies.
Included in delivery:
Ac
tive
co
mp
on
en
ts
B
B.57
Industrial Wireless
measurements.
within the IE-GPRS-I/O, the device can easily be adapted to the
schedules of your service technicians.
module include:
DI 1:
ALARM
the IE-GPRS-I/O ports.
= = 1. 15 A
status of all ports
Password from the
Ac
tive
co
mp
on
en
ts
B
B.58
Industrial Wireless
The Intermediate Server uses simple protocol functions and
makes it possible for IE-GPRS-I/O modules to communicate
with each other. The Intermediate Server enables IE-GPRS-I/Os
are two methods for connection IE-GPRS-I/Os with each other.
recommend, however, that the number of slaves not exceed
module inputs
statistical analysis
username and password
up the communication between the modules.
GPRS Internet
IE-GPRS-I/O Slave IE-GPRS-I/O Master
SAI Gateway
VServer
LAN
PC withVServer
PLC
IE-GPRS-I/O Slave
DI 1
DI 2
DI 3
DI 4
DO 1
DO 2
DO 3
DO 4
IE-GPRS-I/O Master
Intermediate Server (VServer)
Ac
tive
co
mp
on
en
ts
B
B.59
Industrial Wireless
the database
IE-GPRS-I/Os with the application. It also ensures that the
data is stored in the database.
IE-GPRS-I/O
CServer Executable
port 10231
IE-GPRS-I/O
MySQL DBMS
port 3306
Apache CServer
port 80
Communication Server (CServer)
Ac
tive
co
mp
on
en
ts
B
B.60
Industrial Wireless
Similarly to the Intermediate Server, all IE-GPRS-I/Os connect
authenticate with their usernames and passwords. They then
access to the database is possible, for example, if you develop
in-house applications for data analysis.
GPRS
Internet
IE-GPRS-I/O 1
IE-GPRS-I/O 2
IE-GPRS-I/O 3
CServer
LAN
PC withVServer
B.61
B
GPRS module
15 mm
.590”
13.5 mm
.530”
156 mm
6.14”
140 mm
5.45” 44 mm
1.75”
11 mm
0.43”
TS
-35 D
IN-R
ail
79 mm
3.1”
Consider sufficient Space for Antenna
or Cable
% \ "
GPRS module Ordering data
Quad Dual band GSM/GPRS modem
900/1800 MHz - 850/1900 MHz
Type Order No.
IE-GPRS-IO-QUAD 8963930000
Standard antenna with 2.5m cable included in delivery
Accessories
Note
Technical data
Housing Aluminium
Length / Width / Height 137 mm / 45 mm / 155 mm
Ports 8 digital inputs; 4 digital outputs; 4 analogue
inputs; 1 x RS 232 interface
AC input voltage, min.-max. 8-24 V AC
DC input voltage, min.-max. 10-36 V DC
Input power AC / DC max. 5 VA AC / max. 5 Watt DC
Input frequency 47 - 63 Hz
Operating temperature, min.-max. -10 °C-55 °C
Storage temperature, min.-max. -10 °C-70 °C
Installation TS 35;wall
Protection class IP 20
Data rate max. 53.6 kb/s
Functionality SMTP; POP3; FTP; DNS; IP TCP; UDP Sockets
Status indication Power, Status, Connection/Activity
Approvals cULus, CE, EN55024, EN 55022, Gost R
Transmission rate GPRS-dependent
Note:
Weidmüller‘s IE-GPRS-I/O-QUAD GPRS alarm module is used for monitoring
facilities and can signal deviations either automatically or upon request.
The alarm module can send out an alarm via SMS, fax or e-mail. It can also
initiate a voice telephone call to eight contact persons.
Weidmüller‘s GPRS-I/O is convincing, with its 45-mm, thin aluminium
housing and the following configurable features:
ports, via SMS, FAX, e-mail or voice
Ac
tive
co
mp
on
en
ts
Industrial Wireless
Ac
tive
co
mp
on
en
ts
B
B.62
Industrial Wireless
WLAN bridge
Weidmüller‘s WaveLine products can also link or extend your
industrial network with WLAN. Currently, wireless LAN can be
used for industrial manufacturing facilities; it is ideal for use
anywhere where traditional cabling is not suitable or where a
wireless connection is required. The WaveLine WLAN bridge is
ideal for gaining a foothold in Industrial Ethernet. It can be used
wherever end terminal devices have to be connected to your
Ethernet in the simplest way possible. The industry-standard
WLAN-BRIDGE-WAVE (with IP20 protection) features a compact
plastic housing (108 mm x 22.5 mm x 127.8 mm L/W/H) and
VO-class flammability. It can be used in temperatures ranging
from 0°C to 60°C. The module supports WLAN IEEE 802.11b/g
standards and can function interference-free in a production
facility. In addition, it features a 10 Base-T/100 Base-TX (copper)
network interface.
As delivered from the factory, the WLAN bridge comes with:
an RS232 interface (not electrically isolated), an RJ45 interface,
and an antenna The WLAN is capable of auto-negotiation and
auto-crossing (RJ45) and has a redundant power supply. The
WLAN bridge comes with a wide range built-in security: optional
end-to-end 128, 192 or 256-bit AES encryption, WPA-PSK/
TKIP*, and alternative 64/128-bit WEP/WPA2 encryption**.The
bridge is configured with a user-friendly, password-protected
interface which is accessible via the serial port or a web-based
interface. In addition, the thin WLAN bridge module can be
fastened to a mounting rail and comes with its own internal web
server. The module supports the following protocols: ARP, UDP,
TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP, HTTP, SMTP,
TFT. Three LEDs display the operational status: data rate,
power, and connection/activity.
* WPA authentication (Wi-Fi Protected Access) with pre-shared key (PSK - Preshared Key) and with TKIP
encryption (Temporal Key Integrity Protocol) - also known as WPA-PSK/TKIP.
** WEP/WPA2 encryption (Wired Equivalent Privacy)/WI-Fi Protected Access 2. WPA2 is an implementation of the
principle functions described in the IEEE 802.11i security standard.
Ac
tive
co
mp
on
en
ts
B
B.63
Industrial Wireless
The integration of serial or Ethernet-compliant end
devices into an existing wireless LAN
Our WLAN bridge can be integrated into an existing wireless
LAN. The bridge is set to infrastructure mode and registers itself
in the corporate network at the access point.
Mobile remote maintenance enabled by the WLAN bridge
Our WLAN bridge makes it possible for technicians to carry out
remote maintenance and configuration on devices such as the
Siemens S7 PLC. The technician does not need to connect his
PC to the electrical cabinet or directly to the PLC to perform the
maintenance. Instead, he takes advantage of the WLAN bridge
to build a wireless connection to the PLC and carries out the
configuration remotely.
The WLAN bridge then becomes a client. It can integrate
machinery (for example, a forklift) into the network.
WLAN Bridge
WLAN RS232
SPSSiemens S7
MPI- Adapter
B.64
B
WLAN-Bridge
129
22.5108
% \
WLAN bridge Ordering data
Number of ports
1 x RJ45, 1 x RS232, 1 x antenna
Type Order No.
IE-WLAN-BRIDGE-WAVE 8927140000
Accessories
markers
Type Order No.
WS 15/5 MC NEUTRAL 1609880000
Note
Technical data
Housing Plastic
Length / Width / Height 108 mm / 22.5 mm / 127.8 mm
Ports 1x RJ45; 1x RS-232;1x antenna
AC input voltage, min.-max. 10-24 V AC
DC input voltage, min.-max. 10-35 V DC
Input power AC / DC 6 VA AC/4 Watt DC
Operating temperature, min.-max. 0 °C-60 °C
Storage temperature, min.-max. -40 °C-85 °C
Standard IEEE 802.3; 802.3u; 802.3x
Data rate 1, 2, 5.5, 11 Mbps (802.11b) and 6, 9, 12, 18,
24, 36, 48, 54 Mpbs (802.11g)
Functionality Autonegotiation and Autocrossing (RJ45),
redundant voltage supply
Status indication Data rate, Power, Connection/Activity
Approvals cULus, CE, EN55024, EN 55022
Supported protocols ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP,
BOOTP, Auto IP, HTTP, SMTP, TFT
Network Interface Wireless 802.11b, 802.11g and 10 Base-T/100
Base-TX (copper)
Management Internal web server, SNMP (read only), software,
serial and telnet login
Security WEP 64/128, WPA-PSK, TKIP, AES end-to-end
encryption
Note:
WaveLine products can also link or extend your industrial network with
WLAN. Wireless LANs are used any place where cabling is not practical or
where a mobile connection is needed.
Our WaveLine wireless bridges have an operating temperature from 0°C to
60°C and a compact plastic housing featuring flammability class V0. They
are suited for entry in to industrial Ethernet wherever end devices must be
connected to the network in the simplest way.
Ac
tive
co
mp
on
en
ts
Industrial wireless
B.65
B
Ac
tive
co
mp
on
en
ts
Ac
tive
co
mp
on
en
ts
B
B.66
Industrial wireless
The Implementation
The Bluetooth gateway (master) functions as a slave in a
PROFIBUS-DP network or a DeviceNet™ network.
Together with the slaves, it is configured via GSD or EDS files.
Besides communication with bluetooth stations, the gateway
features an additional 12 digital inputs with M12 connectors.
Up to 31 Bluetooth masters can be operated within one
application. Each gateway can communicate with up to six of
its slaves using the WIRELESSopen protocol, which is based
on the CANopen standard.
SAI-Bluetooth
PROFIBUS
DeviceNet TM
GatewaySPS
Slave (1) ... Slave (6)
SAI-Bluetooth
The Concept
A Bluetooth master can perform wireless
communication with up to six slave stations.
All stations function as field devices with
IP67 protection. The connection from the sensor
or actuator utilizes a M12 connector.
Ac
tive
co
mp
on
en
ts
B
B.67
Industrial wireless
The Products
Bluetooth gateway function (master) for 6 Bluetooth slaves
outputs (configurable)
2 digital and 2 analogue outputs
All I/O signals on M12 connectors
Advantages
e.g., for mobile sections of the facility.
for operating voltages and communication
lighting and arrow-shaped status display. Additional colour
display change in event of I/O error
Ac
tive
co
mp
on
en
ts
B
B.68
Industrial wireless
Gateway
Ordering data
IO variants
12 digital inputs
12 digital inputs
Information
Type Qty. Order No.
SAI-AU M12 GW PB/BT 12I 1 1006980000
SAI-AU M12 GW DN/BT 12I 1 1060020000
Technical data bus system
Bus sharing unit Slave
Profibus transmission rate Max. 12 Mbaud
DeviceNetTM transmission rate Max. 500 kBaud
Diagnostic display red
Fieldbus interface
Electrical isolation available yes
Station addresses Rotary switch 1-125
bps rate automatic
Technical data
General data
Insulation material of housing PBT
V-0
Operation temperature 0 °C ... 55 °C
Storage temperature -25 °C ... 70 °C
Ingress protection class IP 67
Electrical data electronics-module
Operating voltage
Digital inputs TYPE1 to EN61131-2
Information UL certification in preparation
Accessories
Plug
Metal plug, Male M12, B-coded, straight
Metal plug, Socket M12, B-coded, straight
Connecting plug in M12 Plug
Terminating resistor in M12 plug
Metal plug, Male M12, 5-pole, shield A-coded
Metal plug, Socket M12, 5-pole, shield A-coded
Miscellaneous accessories
Marker, transparent
M12 protective cap
Type Qty. Order No.
1 1784790000
1 1784780000
SAIEND PB M12 5P B-COD 1 1784770000
SAIEND CAN-M12 5P A-COD 1 1784760000
1 1784740000
1 1784750000
5 1912130000
SAI-SK-M12-UNI 20 2330260000
Information
M12
SAI-AU
Type Qty. Order No.
Ac
tive
co
mp
on
en
ts
B
B.69
Industrial wireless
Slaves
Ordering data
IO variants
16 digital inputs
Information
Type Qty. Order No.
SAI-AU M12 BT 16DI 1 1006940000
1 1006930000
1 1006920000
Technical data
General data
Insulation material of housing PBT
V-0
Operation temperature 0 °C ... 55 °C
Storage temperature -25 °C ... 70 °C
Ingress protection class IP 67
Electrical data electronics-module
Operating voltage
Max. current carrying capacity per output signal 0,5, 2,0 A
Output levels Short-circuit-protected
Total current. max.
Digital inputs TYPE1 to EN61131-2
Analogue outputs
Analogue inputs
Resolution 12 Bit
Accuracy < 0,2 %
Information
Accessories
Miscellaneous accessories
Marker, transparent
M12 protective cap
Type Qty. Order No.
5 1912130000
SAI-SK-M12-UNI 20 2330260000
Information
M12
SAI-AU
Type Qty. Order No.
Ac
tive
co
mp
on
en
ts
B
B.70
Optical media converter
Introduction Media converters
The use of fibre optics is advisable when reliability demands
are high or there are long distances to cover. One simple and
inexpensive solution is the Weidmüller media converter, which
glass fibre connection. The supply voltage can be designed
as a redundant system and therefore provides users with high
or ST fibre optic ports can be set transparently.
Weidmüller Industrial Ethernet media converters provide a
solution for industrial applications that require a highly reliable,
robust data exchange between copper and glass fibre media.
Media converters are cost-effective devices and give users
the option of integrating fibre optics into their networks. The
Weidmüller media converters are real-time-compatible and
remain transparent in the network.
Single-mode long-distance cabling
Pump station20 km
Transparent link
Media converter
Media converter
Long-distance cabling of up to 60 km is possible in single-mode
with our media converters. Our standard converter features a
max. 2-km transmission path in multi-mode and a max. 20-km
transmission path in single-mode. The required connection
cables can be found in Chapter D.
Ac
tive
co
mp
on
en
ts
B
B.71
Optical media converter
Because of their transparent network links, our media converters
are well suited for use within a redundant connection in a ring
topology.
Media converter in RapidRing™, with transparent link
Media converter
Media converter
Managed Switch
RapidRing™
FO
Managed Switch
CU
FO
FO
CU
Production facility
CU
Managed Switch
CU
PLC
CU
B.72
B
WaveLine Media Converter
129
22,5108
% \ "
WaveLine Media Converter Ordering data
Number of ports Type Order No.
8916300000
8916290000
8963430000
8916310000
8958520000
Accessories
Type Order No.
8813490000
1609880000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Optical media converter
B.73
B
Media converter
74 mm
2.9”
85 mm
3.4”
Please allow82,5 mm/3.25”for Fiber Optic
Cable-SetDIN-RailTS-35
40 mm
% \ "
u
Media converter Ordering data
Number of ports Type Order No.
8808220000
8848840000
8808190000
Accessories
Type Order No.
8813490000
Note
Technical data
Note:
Ac
tive
co
mp
on
en
ts
Optical media converter
Ac
tive
co
mp
on
en
ts
B
B.74
Serial media converter
COMServer
The WaveLine ComServer connects your serial interfaces to
your existing network infrastructure in the simplest way possible.
An Internet browser is used for the installation of serial and
network parameters. Similarly carried out over the Ethernet
interface, the configuration is simple and user-friendly. The
COMServer can be configured directly via the RS232 interface
or via the network. With web-based management, a remote
configuration is also possible. The IE-CS-1SERIAL-WAVE
WaveLine ComServer is available with an RS232 port (not
electrically isolated). The IE-CS-2SERIAL-WAVE WaveLine
ComServer comes with two RS232 ports ( RS232 and
RS-232/422/485 – electrically isolated).
Both types of WaveLine ComServers feature auto-negotiation
and auto-crossing (RJ45) functions as well as redundant power
Our COMServer enables you to integrate production facilities
(where, for example, only an RS232 interface is available) into
the corporate network. The Configurator and the configuration
software for the production facility can be installed on a remote
PC. The Configurator and the Com port redirector driver allow
you to configure the COMServer conveniently from a remote
supplies. The ComServer supports the following protocols:
TCP/IP, UDP/IP, DHCP, BOOTP, HTTP and AutoIP.
The Weidmüller WaveLine ComServer comes optionally with
the following ports: IE-CS-1SERIAL-WAVE with one RJ45, one
RS-232 and IE-CS-2SERIAL-WAVE with one RJ45, one RS-
232, one RS-232/485/422. The operational status of the power,
link activity and connection are displayed.
Both ComServer types (IP20 protection) have a compact build
(length: 108 mm, height: 127.8 mm, width: 22.5 mm or 45 mm).
The devices are enclosed in sturdy plastic housings and can be
simply snapped on to a TS35 mounting rail. They can operate in
temperatures ranging from 0 °C to 60 °C.
location. You can also setup communications with production
facilities remotely. This makes it possible to operate the plant in
your own network and to carry out maintenance on machinery
parts.
Integrate your serial end devices into the industrial Ethernet, using our COMServers
CU
CU
CU
Bedienoberfläche
Produktionsanlage
CU
RS232
Ac
tive
co
mp
on
en
ts
B
B.75
Serial media converter
It is possible to use our COMServer as an interface converter.
This enables the data from an RS232 device to be forwarded to
a computer on the corporate network. The illustration shows an
example application of this interface. For example, a scale
located in the warehouse only has a RS232 connection.
The goal is to integrate it into the corporate network and allow it
to access new software.For this, the COMServer can be put to
use as a data-exchange interface between the scale‘s RS232
port and the Ethernet.
The integration of serial end devices into your industrial Ethernet
Inspection of incoming goods
Connection to any
Ethernet infrastructure
B.76
B
COMServer
129
22.5108
% \
COMServer Ordering data
Number of ports
1 x RJ45, 1 x RS232
Type Order No.
IE-CS-1SERIAL-WAVE 8925640000
Accessories
Type Order No.
WS 15/5 MC NEUTRAL 1609880000
Note
Technical data
1x RJ45; 1x RS-232
TS 35
Note:
Ac
tive
co
mp
on
en
ts
Serial media converter
B.77
B
COMServer
45
129
108
% \
COMServer Ordering data
Number of ports Type Order No.
IE-CS-2SERIAL-WAVE 8925650000
Accessories
Type Order No.
WS 15/5 MC NEUTRAL 1609880000
Note
Technical data
TS 35
Note:
Ac
tive
co
mp
on
en
ts
Serial media converter
Ac
tive
co
mp
on
en
ts
B
B.78
Power Over Ethernet
Power-over-Ethernet injector
Thanks to its high component density, Weidmüller‘s new
Power-over-Ethernet injector can supply up to four Ethernet
end devices with power in compliance with the PoE standard.
The power supply can be located anywhere on the network,
regardless of whether an Ethernet switch is present. Power-
over-Ethernet makes it easy to retro-fit and expand your existing
Ethernet networks. A separate 48-V power source is not
required for Weidmüller‘s quadruple Power-over-Ethernet
injector. The PoE supply voltage is generated directly from the
existing 24-V supply in the electrical cabinet.
Workstation
Production facility
Ethernet Ethernet
Ethernet
Ethernet
Ethernet + Power
1 2 3
4 5 6
* 0 #
7 8 9
1 2 3
4 5 6
* 0 #
7 8 9
The integration of PoE in existing networks
Network expansion with PoE
Ethernet
Workstation
Production facility
Ethernet
Ethernet
Ethernet + Power
1 2 3
4 5 6
* 0 #
7 8 9
1 2 3
4 5 6
* 0 #
7 8 9
B.79
B
Industrial Ethernet PoE injector, Advanced Line
145 mm
5.7"
156 mm6.14"
13.46 mm.530"
Allow 3.25" (82.55 mm)
for Fiber Optic Cable.
44 mm
1.75"
% \
Industrial Ethernet PoE injector, Advanced Line Ordering data
Number of ports
4x RJ45 input, 4 x RJ45 output
Type Order No.
IE-POE4 1066840000
Accessories
RJ45 dust-protection plug
Type Order No.
IE-DPC 8813490000
Note
Technical data
Housing Aluminium
Length / Width / Height 140 mm / 45 mm / 155 mm
Ports 4 x RJ45 input; 4 x RJ45 output
AC input voltage, min.-max. 8-24 V AC
DC input voltage, min.-max. 10-36 V DC
Input power AC / DC Max. 75 W
Input frequency 47 - 63 Hz
Operating temperature, min.-max. -40 °C-75 °C
Storage temperature, min.-max. -40 °C-85 °C
Installation TS 35;wall
Protection class IP 20
Data rate 10BASE-T/100BASE-TX
Functionality Transparent
Segment length 100 m
Status indication Data rate, Power, Connection/Activity
Approvals cULus, CE, EN55024, EN 55022
Supported protocols Profinet RT, Modbus TCP, TCP/IP, EthernetIP
Injector Power 48 W; 15 Watt per port
Note:
The PoE4 PoE injector allows you to connect up to four power-over-Ethernet
components. This allows you to easily implement plug-and-play power
supplies for your existing Ethernet networks. The main advantage of power-
over-Ethernet is that you can avoid using additional power supply cables.
This reduces the installation costs and decreases the downtime risk for the
end device.
With a sturdy aluminium housing, the AdvancedLine features a width of
only 45 mm for use in your Industrial Ethernet network. With IP20 protection
and a operating temperature range from –40°C to 75°C, this product line is
perfect for industrial applications.
Ac
tive
co
mp
on
en
ts
Power Over Ethernet
B.80
B
Ac
tive
co
mp
on
en
ts
Pa
ssiv
e c
om
po
ne
nts
C
C.1
Contents
Passive components
Passive components Introduction C.2
Weidmüller IE-LINE C.6
Weidmüller IE-LINE RJ45 C.30
Weidmüller IE-LINE M12 C.38
Front panel interface C.44
Pa
ssiv
e c
om
po
ne
nts
C
C.2
Industrial Ethernet – passive components
Introduction
Connection technology from Weidmüller
You need only one supplier for connecting and linking your
devices: Weidmüller – one-stop shopping for all your connection
technology needs.
Passive components
For offices ... ... and industrial applications
Standards Standards
Production floors Production units
Here are just a few of the relevant standards
Transmission characteristics:
Structured cabling
and others
Plug-in connectors to IEC 61076-3-106
Pa
ssiv
e c
om
po
ne
nts
C
C.3
Industrial Ethernet exists in a variety of different industrial environments.
Introduction
There, its advantages are well known:
Machine construction
Traffic engineering
Automotive construction
Process industry
Pa
ssiv
e c
om
po
ne
nts
C
C.4
Introduction
Practical Guidelines for Industrial Ethernet
and security
practical guidelines.
3-D data
Best service
ó
Industrial Ethernet Handbook- Design and planning - Installation - Commissioning
Pa
ssiv
e c
om
po
ne
nts
C
C.5
... and what more can Weidmüller do for you?
Introduction
Certificates
Pa
ssiv
e c
om
po
ne
nts
C
C.6
The Weidmüller IE-LINE plug-in connectors with STEADYTEC® technology
Weidmüller IE-LINE
STEADYTEC® – this name stands for the future of connection
STEADYTEC® forms the foundation for
The objective:
professional and consistent solutions.
The result:
originated:
The Ethernet connector system:
clever – flexible – modular
your application.
STEADYTEC® is a registered trademark of the Weidmüller,
Pa
ssiv
e c
om
po
ne
nts
C
C.7
Weidmüller IE-LINE
Tool-less assembly and powerful connections:
the RJ45 gigabit connector!
STEADYTEC®: Systematic benefits
combinations of inserts
IEC 61076-3-106
thanks to Weidmüller’s modular system
1. Strip sheath cladding and shorten shield to 5 mm
3. Snap together the two pluggable elements
2. Prepare wires and shorten
4. Finished
Pa
ssiv
e c
om
po
ne
nts
C
C.8
Weidmüller IE-LINE
Connector overview
Connectors for copper cable
RJ45 (IP20)
For use in office environments, in floor
applications
RJ45 (IP67)
M12, D-coded
Connector for fibre-optic cable
SC duplex
in the field or for connecting our active
components
SC-RJ
LC-Duplex
ST
our active components
Pa
ssiv
e c
om
po
ne
nts
C
C.9
Unlimited combinations: the modular principle
Weidmüller IE-LINE
guarantees you decisive advantages for your industrial
Features
couplers and RJ45 modules.
greases, acids and alkalis.
Plug insert Plug housing Flange-mounted housing Flange insert
Co
pp
er
RJ45 crimp HDC RockStar / Variant 5 RJ45 coupling
RJ45 can be assembled on-site Push-Pull / Variant 14
Fib
re-o
pti
c
2 x SC Push-Pull / Variant 4 2SC/SCRJ adapter
Refer to the sets
LC duplex Push-Pull / Variant 14 LC duplex adapter
Pa
ssiv
e c
om
po
ne
nts
C
C.10
Weidmüller IE-LINE
Metal plug
Housings Variant 14 PushPull RJ Variant 14 PushPull fibre-optic Variant 5 HDC
Inserts 1962560000 1962550000 1011570000 1011560000 1058110000 1058100000 1962540000
RJ45 AWG 24 crimp 1962720000 1963150000 1963140000 1012070000 1012160000 1963110000
RJ45 AWG 22
tool-free
1962730000 1963130000 1963120000 1012090000 1012170000 1963200000
LWL SC MM 1962750000 1963270000 1963260000 Please order separately
1962760000 1963310000 1963300000 Please order separately
1962770000 1963290000 1963280000 Please order separately
LWL LC MM 1962780000 1963230000 1963220000 Please order separately
1962790000 1963250000 1963240000 Please order separately
Protective cap 1965690000 1058280000 1058280000 1963690000
1963260000
Plastic plug
Housings Variant 4 PushPull
Inserts 1012460000 1012440000 1962530000 1962520000
RJ45 AWG 24 crimp 1962720000 1012560000 1012470000 1963190000 1963180000
RJ45 AWG 22
tool-free
1962730000 1012570000 1012490000 1963170000 1963160000
LWL SC MM 1962750000 1963370000 1963360000
1962760000 1963410000 1963400000
1962770000 1963390000 1963380000
LWL LC MM 1962780000 1963330000 1963320000
1962790000 1963350000 1963340000
Protective cap 1965690000 1963890000
1963110000 1963320000 1912170000
Individual components
Sets
Pa
ssiv
e c
om
po
ne
nts
C
C.11
Weidmüller IE-LINE
Individual components
Sets
Metal flange
Housings Variant 14 PushPull RJ Variant 14 PushPull fibre-optic Variant 5 HDC
Central flange Central flange
Inserts 1963540000 1011540000 1047950000 1963530000
RJ45 coupling 1962840000 1963470000 1012310000 1058250000 1963510000
RJ45 module 1962850000 1963480000 1012320000 1058270000 1963460000
1963840000 Please order separately Please order separately Please order separately Please order separately
Profinet 1963830000 Please order separately Please order separately Please order separately 1963700000
SC/SCRJ coupling Multi Mode 1964430000 1964450000 1058120000 1062590000
1962870000 1963440000 1058140000 1062600000
LC Duplex coupling Multi Mode 1964420000 1964440000 1058130000 1062610000
1962880000 1963430000 1058150000 1062620000
1019570000 Please order separately Please order separately Please order separately Please order separately
Protective cap 1965700000 1058310000 1058310000 1058310000 1665750000
1963510000 1964450000 1964460000 1012320000
Plastic flange
Housings Variant 4 PushPull
Inserts 1016960000 1963520000
RJ45 coupling 1962840000 1012370000 1963490000
RJ45 module 1962850000 1012380000 1963500000
1963840000 Please order separately 1963730000
Profinet 1963830000 Please order separately Please order separately
SC/SCRJ coupling Multi Mode 1964430000 Please order separately 1964470000
1962870000 Please order separately 1963420000
LC Duplex coupling Multi Mode 1964420000 Please order separately 1964460000
1962880000 Please order separately 1963450000
1019570000 Please order separately Please order separately
Protective cap 1965700000 1963900000
Pa
ssiv
e c
om
po
ne
nts
C
C.12
Weidmüller IE-LINE
Junction boxes
Flange version Variant 4 PushPull/plastic Variant 5 HDC
Housings
1 port – straight version 1966300000 1966220000 1966260000
2 ports – right version 1966310000 1966230000 1966270000
2 ports – left version 1966320000 1966240000 1966280000
2 ports – straight version 1966330000 1966250000 1966290000
1966260000
1966320000
1966270000
1966250000
C
C.13
Housing variant: 1 metal
12
.56
+ 0
.21
– 0
.22
Ø 27.41 + 0.48
– 0.49
Ø 27 + 0.3 0
24 ± 0.1
4 x Ø 3.3 ± 0.1
Housing variant: 1 metal Ordering data
Flange-mounted housing
Plug housing
With kink prevention
Type Order No.
1963540000
1962550000
1962560000
Accessories
Colour coding
yellow
Orange
green
grey
white
Dust cap
Type Order No.
1963030000
1963020000
1963010000
1963040000
1963000000
1962990000
1965700000
1965690000
Note
Technical data
Note:
Application:
Variation:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.14
Housing variant: 1 plastic
12
,56
+ 0
,21
– 0
,22
Ø 27,41 + 0,48
– 0,49
Ø 27 + 0,3 0
24 ± 0,1
4 x Ø 3,3 ± 0,1
Housing variant: 1 plastic Ordering data
Flange-mounted housing
Plug housing
With kink prevention
Type Order No.
1016960000
1012440000
1012460000
Accessories
Colour coding
yellow
Orange
green
grey
white
Dust cap
Type Order No.
1963030000
1963020000
1963010000
1963040000
1963000000
1962990000
1965700000
1965690000
Note
Technical data
Note:
Application:
Variation:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.15
Housing variant: 4 plastic
Ø 22.5 ± 0.2
4 x Ø 3.3 ± 0.1
Ø 22.5 ± 0.2
21 ± 0.1
32 ±
0.1
3.3 ± 0.1
23.9
5 ±
0.1
Housing variant: 4 plastic Ordering data
Flange-mounted housing
Plug housing
With kink prevention
Type Order No.
1963520000
1962520000
1962530000
Accessories
Colour coding
yellow
Orange
green
grey
white
Dust cap
Type Order No.
1963030000
1963020000
1963010000
1963040000
1963000000
1962990000
1963900000
1963890000
Note
Technical data
Note:
Application:
Variation:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.16
Housing variant: 5 metal
39.4
23.8
30
Ø3.3b
42
24.2
30
36
Housing variant: 5 metal Ordering data
Flange-mounted housing
Plug housing
Type Order No.
1963530000
1962540000
Accessories
Dust cap Type Order No.
1968930000
1968920000
Note
Technical data
Note:
Application:
Variation:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.17
Housing variant: 14 metal
12
,56
+ 0
,21
– 0
,22
Ø 27,41 + 0,48
– 0,49
33 ± 0,1
18
,4 ±
0,0
5
22 ± 0,05
M3
R1,
25
Housing variant: 14 metal Ordering data
Flange-mounted housing
Plug housing
Type Order No.
1011540000
1047950000
1047940000
1011560000
1011570000
1058100000
1058110000
Accessories
Colour coding
yellow
Orange
green
grey
white
Dust cap
Type Order No.
1963030000
1963020000
1963010000
1963040000
1963000000
1962990000
1058310000
1058280000
Note
Technical data
Note:
Application:
The differences:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.18
RJ45 inserts
9,4
5
12,9
40,22
13,1
9
15,6
32,51
13,1
9
15,6
40,1
RJ45 inserts Ordering data
Flange insert
Plug insert
Type Order No.
1019570000
1962840000
1962850000
1963840000
1963830000
1962730000
1962720000
Accessories
tools Type Order No.
9202800000
Note
Technical data
Note:
Application:
RJ45 tool-free connector insert
RJ45 crimp connector insert:
RJ45 flange insert:
USB flange insert
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.19
SC inserts
9,5
13,95
46,5
14,5
62,7
13,1
9
17,8
33,9
SC inserts Ordering data
Flange insert
Plug insert
Type Order No.
1962870000
1964430000
1962760000
1962750000
1962770000
Accessories
tools Type Order No.
9205320000
9205340000
9205350000
1032030000
Note
Technical data
Note:
Application:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.20
LC inserts
9,5
13,15
31,3
14,5
59,1
9,3
15,9
30,9
LC inserts Ordering data
Flange insert
Plug insert
Type Order No.
1962880000
1964420000
1962790000
1962780000
Accessories
tools Type Order No.
9205330000
1032030000
Note
Technical data
Note:
Application:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.21
Outlet boxes IP 67
80
125113106
113
725280
756356
63
7252
IP 67 junction boxes Ordering data
Variation 1
Variant 4
Variation 5
Type Order No.
1966300000
1966320000
1966310000
1966330000
1966220000
1966240000
1966230000
1966250000
1966260000
1966280000
1966270000
1966290000
Accessories
Flange insert Type Order No.
1962850000
1963840000
1963830000
Note
Technical data
grey
Note:
Application:
Variations:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.22
Junction box, cable coupling
41.8
1.65"
64
2.52"
61.6
2.4
3"
Ø 41.8
1.65"
97.7
3.85"106.9
4.21"
118.7
4.67"
42.4
1.6
7"
Junction box, cable coupling Ordering data
Variation 1
Variant 4
Type Order No.
1061830000
1061820000
1045780000
1045960000
Accessories
Flange insert Type Order No.
1962850000
1963840000
1963830000
Note
Technical data
Note:
The differences:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.23
Mounting rail outlet RJ45
Mounting rail outlet RJ45 Ordering data
RJ45 Type Order No.
8946920000
8946930000
8946940000
8946950000
Accessories
markers
Labels
Type Order No.
1857440000
1964070000
1964100000
1964110000
1964080000
1964120000
1964090000
Note
Technical data
Note:
Application:
Variations:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.24
Mounting rail outlet FO
Mounting rail outlet FO Ordering data
Fibre-optic Type Order No.
8947010000
8947020000
8946970000
8946980000
8946990000
8947000000
Accessories
markers
Labels
Type Order No.
1857440000
1964070000
1964100000
1964110000
1964080000
1964120000
1964090000
Note
Technical data
Note:
Application:
Variations:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.25
Mounting rail outlet USB
Mounting rail outlet USB Ordering data
USB Type Order No.
8946960000
Accessories
markers
Labels
Type Order No.
1857440000
1964070000
1964100000
1964110000
1964080000
1964120000
1964090000
Note
Technical data
Note:
Application:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.26
19“ patch panel
44
482.6
116.5
19“ patch panel Ordering data
19“ patch panel Type Order No.
1049270000
1049910000
1049920000
1049930000
Accessories
Flange insert Type Order No.
1962850000
1963840000
1963830000
1019570000
Note
Technical data
Note:
Application:
The differences:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.27
RJ45 crimp plug
13.9
10
ca. 41
0.8
6.6
16.15 0.15
11.68 0.08
RJ45 crimp plug Ordering data
Plug Type Order No.
1963590000
1963580000
Accessories
Kink-prevention sleeve
yellow
Orange
green
grey
white
tools
Type Order No.
1962480000
1962470000
1962450000
1962490000
1962440000
1962430000
1962500000
9202800000
Note
Technical data
Note:
Application:
Variations:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.28
RJ45 plug field installation
9.4
5
12.9
51.32
RJ45 plug, no tools required Ordering data
Plug Type Order No.
1963600000
Accessories
Strain relief
yellow
Orange
grey
green
white
Type Order No.
1963090000
1963080000
1963070000
1963060000
1963100000
1963050000
Note
Technical data
Note:
Application:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
C
C.29
FO connector
FO connector Ordering data
Plug LC-duplex
Plug SC
Plug SC-duplex
Plug SCRJ
Type Order No.
1962980000
1962970000
1962920000
1962910000
1962930000
1964410000
1964480000
1962950000
1962940000
1962960000
Accessories
Fibre-optic plug clip Type Order No.
1962900000
1962890000
Note
Technical data
Note:
Application:
Connection brackets for SCRJ:
Connection brackets for SCD:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE
Pa
ssiv
e c
om
po
ne
nts
C
C.30
Overview of Weidmüller IE-LINE RJ45 and M12
Weidmüller IE-LINE RJ45
For use in switching cabinets and on machines and plants in
harsh industrial environments.
Terminal rail outlets
for connections in switching
cabinets or junction boxes
Adapter and coupler
Junction box, coupler and plug PCB connecting elements
for your devices in the field of
Plug-in connector
connection
Built-in flange
for switching cabinet interfaces
Cable splitter module
Connecting module
for connecting or repairing installation
lines
C
C.31
Terminal rail outlets
(1TE)
17,5 + 0,560
45±0
,5
35
26,1
26,1
Terminal rail outlets Ordering data
with Coupling
with module insert
Type Order No.
8879050000
8808340000
8808360000
8891980000
Accessories
Type Order No.
8813500000
Note
Technical data
Note:
Application:
The differences:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE RJ45
C
C.32
RJ45 connecting plug
24,8
6,6
11,68
RJ45 connecting plug Ordering data
Plug Type Order No.
8813110000
8813120000
Accessories
tools Type Order No.
9202800000
Note
Technical data
Ω
Ω
Note:
Application:
Variations:
Weidmüller IE-LINE RJ45
Pa
ssiv
e c
om
po
ne
nts
C
C.33
Pa
ssiv
e c
om
po
ne
nts
Junction box, cable coupler, plug V 06
74
54 64
5
8,5
64
79
41,8
59,5
49
Junction box, cable coupling, V 06 plug Ordering data
Description of article Type Order No.
8808370000
8813090000
8808380000
Accessories
tools Type Order No.
9202800000
Note
Technical data
Note:
Application:
The differences:
Weidmüller IE-LINE RJ45
C
C.34
Built-in flange V 06
32,526,6±0,2
33
17
,5
22
,89
±0
,2
16,35
40,95
8,9
16,35
33,85
24
,33
8,9
16,35
29,3
8,9
16,35
32,93
22
,08
8,9
V 06 mounting flange Ordering data
Coupling flange
RJ45 module flange
USB flange
Type Order No.
8808450000
8829450000
8829440000
8808440000
8892670000
Accessories
Flange insert Type Order No.
8808330000
8908840000
8878120000
8878130000
Note
Technical data
Note:
Application:
TVariations:
Weidmüller IE-LINE RJ45
Pa
ssiv
e c
om
po
ne
nts
C
C.35
Pa
ssiv
e c
om
po
ne
nts
Cable splitter module
Plug RJ45
Socket RJ45Socket RJ45
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 81 2 3 4 5 6 7 8
Cable splitter module Ordering data
Description of article Type Order No.
8808400000
Accessories
Note
Technical data
Note:
Application:
Weidmüller IE-LINE RJ45
C
C.36
Connection module
Connecting module Ordering data
Description of article Type Order No.
8808410000
Accessories
tools Type Order No.
9013970000
Note
Technical data
®
Note:
Application
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE RJ45
C
C.37
Pa
ssiv
e c
om
po
ne
nts
Pa
ssiv
e c
om
po
ne
nts
C
C.38
M12 connection system
Weidmüller IE-LINE M12
Description
M12 is by far the most widespread connection method for
controller systems and field level connections M12 connections
have been used with success in the automation sector for about
thirty years. The M12 is trusted by users for its compact and
sturdy design. It is also available with IP67 protection in
compliance with EN 60529. IE organizations and associations
are now leading harmonization efforts regarding IP67
connections in Industrial Ethernet. These organizations agree on
the use of the M12 connector with the D-coded mating profile.
The Profibus User Organization (Profinet), Ethernet Powerlink
Standardization Group (Ethernet Powerlink), Modbus IDA
(Modbus) and ODVA (Ethernet/IP) all support the M12, D-coded
connection along side the RJ45 connection.
Application
M12, D-coded plug-in connectors and cables are used for
applications in harsh industrial environments – ideal for Ethernet
connections in class of protection IP 67 between devices on the
machine and in the switching cabinet, or in moving cable carriers.
Features
The benefits for you
C
C.39
M12 connector, screw connection
appr
ox. 6
2
M12x1
Ø 19.6
Ø 6–8 mmCable entry
Ø 6–8 mmCable entry
M12x1
Ø 19.6
appr
ox. 5
7
M12 connector, screw connection 1 Ordering data
Male
Socket
Type Order No.
1892120000
1892130000
Accessories
Note
Technical data
Note:
Application:
Features:
The differences:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE M12
C
C.40
M12 connector, tension-clamp connection
appr
ox. 6
2
M12x1
Ø 19.6
Ø 6–8 mmCable entry
Ø 6–8 mmCable entry
M12x1
Ø 19.6
appr
ox. 5
7
M12 connector, tension-clamp connection Ordering data
Male
Socket
Type Order No.
1892120001
1803930001
1892130001
Accessories
Note
Technical data
Note:
Application:
Features:
Differences:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE M12
C
C.41
M12 adapters and coupling
Adaptors and couplings M12 Ordering data
Adapter
with Coupling
Type Order No.
8901620000
8901630000
8901640000
Accessories
Note
Technical data
Note:
Application:
Variations:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE M12
C
C.42
M12 PCB connecting element
M12 PCB connection element Ordering data
Connection element Type Order No.
8902810000
8902820000
Accessories
Note
Technical data
Note:
Variations:
Pa
ssiv
e c
om
po
ne
nts
Weidmüller IE-LINE M12
C
C.43
Pa
ssiv
e c
om
po
ne
nts
Pa
ssiv
e c
om
po
ne
nts
C
C.44
Front panel interface
Communicating through the closed front panel of the
switchgear cabinet, by using Weidmüller‘s front panel
interface in IP65.
Access to the computer is typically via standardized interfaces
such as RJ45 and USB, in order to program and configure
the facility. With IPC however, this interface is located within
switchgear cabinet. Users must always first open the cabinet
door before servicing. In conjunction with our customers,
Weidmüller has developed an amazingly simple and practical
solution for accessing devices within the cabinet without
opening the cabinet door - the FrontCom® front panel interface.
The front panel interface also functions as a service flap through
which the standard interfaces are easily accessible externally.
Designed with IP65 protection, the front panel interface offers
a cover which can be closed and locked. You can thus raise
the level of security when needed and prevent access by a third
party. In addition, FrontCom® has an efficient and open design.
Customized interfaces and functions can be delivered
pre-assembled as adapter plates, on customer request. The
result is a quicker, simpler and more targeted approach to your
system‘s implementation, service, monitoring and expansion.
Because of a variety of available adapter solutions, FrontCom®
accepts different interfaces and can be variably adapted for your
application.
FrontCom®
Pa
ssiv
e c
om
po
ne
nts
C
C.45
Front panel interface
FrontCom® simplifies service, start-up, and monitoring
Weidmüller‘s FrontCom® product line offers many possibilities;
it can be combined with RJ45, Sub-D 9-pole/15-pole/19-pole,
USB or Schuko sockets. Additional interfaces available on
request.
Both the proven RJ45 modules (from the IE line) with
STEADYTEC® technology as well as the USB module can
be used in the FrontCom® Micro.
FrontCom® Micro
FrontCom® Custom
FrontCom® RockStar®
Create your customized service interface.
Pa
ssiv
e c
om
po
ne
nts
C
C.46
Front panel interface
FrontCom® frame
designation tags, no insert
Technical data
Version
Material
UL 94 flammability class
Colour
Resistance to shocks
Threaded bolts / screws
Durabiity
Ingress protection class
Pollution severity
Storage temperature
Length x width x height mm
Note
Application
85
59
101
136
1473324
15
R132
Locking mechanism
Lock with key
FrontCom® GH Key
lockable
Lockable housing
PPE
V0
RAL 7004
to DIN EN 50102
M5 / V2A
UV; Fuel; Oil
IP65 according to EN 60529
3
-20 °C…+80 °C
33 x 101 x 136
With 2 keys, without insert
FrontCom® GH Knob
lockable
Lockable housing
PPE
V0
RAL 7004
to DIN EN 50102
M5 / V2A
UV; Fuel; Oil
IP65 according to EN 60529
3
-20 °C…+80 °C
33 x 101 x 136
with lock, without insert
Type Qty. Order No.
FRONTCOM GH KEY 1 1879200000
Designation tags ESG8/17 1720610000
Felt pen STI-S 0508401694
Ordering data
Note
Type Qty. Order No.
FRONTCOM GH KNOB 1 1879210000
Designation tags ESG8/17 1720610000
Felt pen STI-S 0508401694
Pa
ssiv
e c
om
po
ne
nts
C
C.47
Front panel interface
FrontCom® Inserts
® frames
Technical data
Version
Material
UL 94 flammability class
Colour
Storage temperature
Interfaces
Length x width x height mm
Note
Application
USB adapter
RJ45 adapter
Sub-D 9-pole
Sub-D 25-pole
Earthed power socket TS 35:
Part No. 8734580000 not included
View of rear
Earthing screw must be connected!
Tightening torque
for screws: 1.5 Nm
FrontCom® AR Data
RJ45, USB, SUB D 9+25 pole
Combination of four integrated data interfaces
Wired 1:1
PPE
V0
RAL 7004
-20 °C…+80 °C
1 x USB: type A, female-female,
Lockable with inserted USB stick
1 x RJ45: female-female, Cat.From 5 to 100 MHz
1 x SUB D 9-pole: female-male
1 x SUB D 25-pole: female-male
85 x 101 x 136
FrontCom® AR Plug
Adapter for 230 V earthed plug
Frame includes a Schuko socket
Stainless steel
-20 °C…+80 °C
230 V Schuko socket
59 x 101 x 136
Type Qty. Order No.
FRONTCOM AR DATA 1 1879220000
Designation tags ESG8/17 1720610000
Felt pen STI-S 0508401694
Ordering data
Note
Type Qty. Order No.
FRONTCOM AR PLUG 1 1879230000
Earthed power socket 8734580000
Pa
ssiv
e c
om
po
ne
nts
C
C.48
Front panel interface
FrontCom® Inserts
® frames
Technical data
Version
Material
UL 94 flammability class
Storage temperature
Interfaces
Length x width x height mm
Note
Application
Cut-out: HA48
see drilling template
FrontCom® AR
Part No. 1879240000
FrontCom® Plug
FrontCom® Data
FrontCom® GH
FrontCom® AR
Universal
Universal plate without cut-outs
Aluminium
V0
-20 °C…+80 °C
Universal
2,5 x 101 x 136
Classic
Aluminium plate, completely assembled nitte
Aluminium
-20 °C…+80 °C
1x Schuko socket
1x RJ45. female-female
1x USB, Type A, female-female
1x SUB D 9-pole, male-female
136 x 101 x 35
Type Qty. Order No.
FRONTCOM AR 1 1879240000
Ordering data
Note
Type Qty. Order No.
FC-AR-D9/RJ45/USB/230 1 1008130000
Pa
ssiv
e c
om
po
ne
nts
C
C.49
Front panel interface
FrontCom® frame and insert
Technical data
Version
Material
Resistance to shocks
Ingress protection class
Storage temperature
Interfaces
Length x width x height mm
Note
Application
FrontCom® RockStar®
Frame
109.5
94 Ø5.5
7
b
110
126.6
65
82.5
8931 23
.3
Lockable housing
diecast aluminium
to DIN EN 50102
IP65 according to EN 60529
-40 °C…+100 °C
FrontCom® RockStar®
Insert
Aluminium plate, completely assembled
Aluminium
-20 °C…+80 °C
1x Schuko socket
1x RJ45. female-female
1x USB, Type A, female-female
1x SUB D 9-pole, male-female
74 x 85 x 35
Type Qty. Order No.
HDC 32B ADLU 1 1219800000
Ordering data
Note
Type Qty. Order No.
FC-RS-D9/RJ45/USB/23 1 1008120000
Pa
ssiv
e c
om
po
ne
nts
C
C.50
Front panel interface – Accessories
InsertsBase plates
FrontCom® Custom and RockStar®
Type Order No.
Insert for RJ45 coupling0 4341270000
Insert for USB coupling 8941340000
Insert for Sub-D 9-pole plug/socket0 8910980000
Insert for Sub-D 9-pole plug/plug 5655400000
Insert for Sub-D 9-pole socket/socket 5655390000
Insert for Sub-D 15-pole plug/plug 5655410000
Insert for Sub-D 15-pole socket/socket 5655420000
Insert for Sub-D 25-pole plug/plug 5655430000
Insert for Sub-D 25-pole plug/socket 5655440000
Insert for Sub-D 25-pole socket/socket 5655450000
Einsatz Sub-D 25-pol Buchse/Buchse 5655460000
Base platesType Order No.
Frontcom Standard base plate 4341150000
Frontcom RockStar base plate 4341160000
Pa
ssiv
e c
om
po
ne
nts
C
C.51
Front panel interface
FrontCom® Micro
A
Technical data
Category
Protection class
Housing material
Colour
Shielding
Installation
Plugging cycles
FrontCom® Micro
87
21
.9
30 34.7
Cat. 6A / Class EA (IEC 11801 PDAM Am 1.2 2007)
IP 65 gemäß EN 60529
PA; UL 94: V-0 (Protective cap NBR)
black
360° shield contact
to electrical cabinet, distribution board or control panel
750 plugging cycles for connectors, according to IEC 60603-7
Application:
Weidmüller‘s FrontCom® Micros are your best choice when you
need an IP65 connection at the control panel, electrical cabinet
or distribution board.
The differences:
version
Ethernet
Markers, FrontCom® Micro
Type Order No.IE-FCM-RJ45-C 1018790000
IE-FCM-RJ45-FJ-A 1018810000
IE-FCM-RJ45-FJ-B 1018820000
IE-FCM-RJ45-FJ-P 1018830000
IE-FCM-USB-A 1018840000
SM-H 27/18 1716630000
SM 27/18 MC 1699860000
Ordering dataProduct description
FrontCom®
FrontCom®
FrontCom®
FrontCom®
FrontCom®
SwitchMark holder
SwitchMark markers, white
Note: Refer to Catalogue 7 for additional variants.
Pa
ssiv
e c
om
po
ne
nts
C
C.52
Ca
ble
D
D.1
Contents
Cable
Cable
Overview – Copper cables D.2
Galaxy Configurator for copper cable D.4
Copper cables – bulk stock - installation cable D.5
Copper cables – bulk stock - connecting cable D.9
Copper cables – bulk stock - trailing cable D.13
Copper cables – bulk stock - ProfiNet cable D.14
Copper cables – assembled cable - patch cable D.17
Copper cables – assembled cable - crossover-patch cable D.18
Copper cables – assembled cable - system cable D.19
Copper cables – assembled cable - trailing cable D.25
Overview – Fibre-optic cables D.32
Galaxy Configurator for fibre-optic cable D.34
Fibre-optic cables – bulk stock - FO connecting cable D.35
Fibre-optic cables – bulk stock - FO trailing cable D.36
Fibre-optic cables – assembled cable - FO system cable D.37
Fibre-optic cables – assembled cable - FO trailing cable D.39
Fibre-optic cables – assembled cable - FO patch cable D.41
Ca
ble
D
D.2
Overview – Copper cables
Overview of copper cables
Copper cables should be your first choice for applications in
offices and harsh industrial environments.
Advantages:
Industrial installation cables, horizontal cables
…for stationary, permanent
installation in cable ducts and cable
trays
Industrial connecting cables
...for flexible installations in machines
and plants in industrial applications
and difficult environments
Industrial trailing cables
...for applications subjected to
constant movement
System cable for railway applications
Pre-assembled cable in Cat.5 with
can be used on railway vehicles for
both interior and exterior installations.
Industrial patch cables
...not only for office applications, but
also in switching cabinets for
industrial applications
and zero halogens
Industrial system cables
...pre-assembled cables for flexible
installations in machines and plants in
industrial applications and difficult
environments
Industrial trailing cables
Pre-assembled cable for constant
motion, e.g., with draglines
Raw cables Assembled cables
Ca
ble
D
D.3
Overview – Copper cables
Ordering data for copper cables
Type Cat./Class Plug-in connector Length
left right
Industrial installation cables 100 m Metre goods
Cat.5 - - 8813160000 8944310000
Cat.5 - - 8813150000 8953160000
Cat.7 - - 8813140000 8955350000
Cat.7 - - 8813130000 8955360000
- - 8899000000 8855950000
Industrial connecting cables 100 m
Cat.5 - - 8813200000 8938880000
Cat.5 - - 8813190000 8955490000
Cat.7 - - 8813180000 8954300000
Cat.7 - - 8813170000 8955480000
- - 8898990000 8955560000
Industrial trailing cables Metre goods
Cat.5 - - 8813210000
- - 8899010000
Industrial trailing cables 1 m 2 m 5 m 10 m 15 m 20 m
Cat.5 8829710000 8829720000 8829730000 8829740000 8829750000 8829760000
1,5 m 3 m 5 m 10 m
Cat.5 8877610015 8877610030 8877610050 8877610100
Industrial patch cables 0,5 m 1 m 2 m 3 m 4 m 5 m 10 m
Cat.6 8808830000 8808840000 8808850000 8808860000 8892570000 8808870000 8808880000
20 m 30 m 40 m 50 m 60 m 70 m 80 m
8867440000 8867460000 8867470000 8867480000 8867700000 8867490000 8867500000
0,5 m 1 m 2 m 3 m 4 m 5 m 10 m
Cat.6 8818620000 8829460000 8818630000 8829470000 8829480000 8829490000
Industrial system cables 1 m 2 m 5 m 10 m 15 m 90 m
Cat.5 8829560000 8829590000 8829620000 8829650000 8829680000 8894650000
Cat.6 8829500000 8815050000 8815080000 8815110000 8829530000
Cat.5 8829570000 8829600000 8829630000 8829660000 8829690000
Cat.6 8829510000 8815060000 8815090000 8815120000 8829540000
Cat.5 8829580000 8829610000 8829640000 8829670000 8829700000
Cat.6 8829520000 8815070000 8815100000 8815130000 8829550000
Ca
ble
D
D.4
Copper cables
Galaxy Configurator for copper cable
offline with the Galaxy software program) makes it possible for
you to create fully-assembled cables adapted to your
requirements and specifications.
both ends, or with two different mating profiles, or with one end
left open.
data sheets for all of your customized cable variants.
representative.
D
D.5
Bulk stock - installation cable Cat.5 PUR
Bulk stock - installation cable Cat.5 PUR Ordering data
Cat.5 Ethernet, PUR Type Order No.
8813160000
8944310000
Accessories
Sheathing stripper
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.6
Bulk stock - installation cable Cat.5 PVC
Bulk stock - installation cable Cat.5 PVC Ordering data
Cat.5 Ethernet, PVC Type Order No.
8813150000
8953160000
Accessories
Sheathing stripper
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.7
Bulk stock - installation cable Cat.7 PUR
Bulk stock - installation cable Cat.7 PUR Ordering data
Cat.7 Ethernet, PUR Type Order No.
8813140000
8955350000
Accessories
Sheathing stripper
Type Order No.
1727770001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.8
Bulk stock - installation cable Cat.7 PVC
Bulk stock - installation cable Cat.7 PVC Ordering data
Cat.7 Ethernet, PVC Type Order No.
8813130000
8955360000
Accessories
Sheathing stripper
Type Order No.
1730560001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.9
Bulk stock - connection cable Cat.5 PUR
Bulk stock - connection cable Cat.5 PUR Ordering data
Cat.5 Ethernet, PUR Type Order No.
8813200000
8938880000
Accessories
Sheathing stripper
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.10
Bulk stock - connection cable Cat.5 PVC
Bulk stock - connection cable Cat.5 PVC Ordering data
Cat.5 Ethernet, PVC Type Order No.
8813190000
8955490000
Accessories
Sheathing stripper
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.11
Bulk stock - connection cable Cat.7 PUR
Bulk stock - connection cable Cat.7 PUR Ordering data
Cat.7 Ethernet, PUR Type Order No.
8813180000
8954300000
Accessories
Sheathing stripper
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.12
Bulk stock - connection cable Cat.7 PVC
Bulk stock - connection cable Cat.7 PVC Ordering data
Cat.7 Ethernet, PVC Type Order No.
8813170000
8955480000
Accessories
Sheathing stripper
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.13
Bulk stock - trailing cable Cat.5 PUR
Bulk stock - dragline cable Cat.5 PUR Ordering data
Cat.5 Ethernet, PUR Type Order No.
8813210000
8936390000
Accessories
Sheathing stripper
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
IE-CST 9204350000
9030060000
Note
Technical data
≤
Note:
Application:
Ca
ble
Copper cables
D
D.14
Bulk stock - PROFINET cable
Bulk stock - Profinet cable Ordering data
Cat.5 PROFINET, PVC Type Order No.
8899000000
8955950000
Accessories
Sheathing stripper
Type Order No.
1718411687
1718431687
1689470001
1730560001
1719840000
1719850000
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.15
Bulk stock - PROFINET cable
Bulk stock - Profinet cable Ordering data
Cat.5 PROFINET, PVC Type Order No.
8898990000
8955560000
Accessories
Sheathing stripper
Type Order No.
1718411687
1718431687
1689470001
1730560001
1719840000
1719850000
IE-CST 9204350000
9030060000
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.16
Bulk stock - PROFINET cable
Bulk stock - Profinet cable Ordering data
Cat.5 PROFINET, PUR Type Order No.
8899010000
8947670000
Accessories
Sheathing stripper
Type Order No.
1718411687
1718431687
1689470001
1730560001
1719840000
1719850000
IE-CST 9204350000
9030060000
Note
Technical data
≤
Note:
Application:
Ca
ble
Copper cables
D
D.17
Assembled cable - patch cable
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Assembled cable - patch cable Ordering data
Cat.6,patch cable, LSZH Type Order No.
8808840000
8808850000
8808860000
8892570000
8808870000
8808880000
8922580075
8922580150
8867440000
8867450000
8867460000
8867560000
8867470000
8867480000
8867700000
8867490000
8867500000
8867570000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.18
Assembled cable - crossover patch cable
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Assembled cable - crossover patch cable Ordering data
Cat.6, Cross-over patch cable, LSZH Type Order No.
8818620000
8829460000
8818630000
8829470000
8829480000
8829490000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.19
Assembled cable - system cable IP20-IP20 Cat.5
Assembled cable - system cable IP20-IP20 Cat.5 Ordering data
Cat.5 Ethernet, PUR, IP20-IP20 Type Order No.
8829560000
8829590000
8829620000
8829650000
8829680000
8935660200
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.20
Assembled cable - system cable IP20-IP20 Cat.6
Assembled cable - system cable IP20-IP20 Cat.6 Ordering data
Cat.6 Ethernet, PUR, IP20-IP20 Type Order No.
8829500000
8815050000
8815080000
8815110000
8829530000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.21
Assembled cable - system cable IP20-IP67 V06 Cat.5
Assembled cable - system cable IP20-IP67 V06 Cat.5 Ordering data
Cat.5 Ethernet, PUR, IP20-IP67 Type Order No.
8829570000
8829600000
8829630000
8829660000
8829690000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.22
Assembled cable - system cable IP20-IP67 V06 Cat.6
Assembled cable - system cable IP20-IP67 V06 Cat.6 Ordering data
Cat.6 Ethernet, PUR, IP20-IP67 Type Order No.
8829510000
8815060000
8815090000
8815120000
8829540000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.23
Assembled cable - system cable IP67-IP67 V06 Cat.5
Assembled cable - system cable IP67-IP67 V06 Cat.5 Ordering data
Cat.5 Ethernet, PUR, IP67-IP67 Type Order No.
8829580000
8829610000
8829640000
8829670000
8829700000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.24
Assembled cable - system cable IP67-IP67 V06 Cat.6
Assembled cable - system cable IP67-IP67 V06 Cat.6 Ordering data
Cat.6 Ethernet, PUR, IP67-IP67 Type Order No.
8829520000
8815070000
8815100000
8815130000
8829550000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
Copper cables
D
D.25
Assembled cable - trailing cable IP67-IP67 V06
Assembled cable - dragline cable IP67-IP67 V06 Ordering data
Cat.5 Ethernet, PUR, IP67-IP67 Type Order No.
8829710000
8829720000
8829730000
8829740000
8829750000
8829760000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
≤
Note:
Application:
Ca
ble
Copper cables
D
D.26
Copper cables
Assembled cable - system cable IP67-IP67 V01 Cat.5
Assembled cable - system cable IP67-IP67 V01 Cat.5 Ordering data
Cat.5 Ethernet, PUR, IP67-IP67 Type Order No.
1066850000
1066860000
1066870000
1066880000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Ca
ble
D
D.27
Assembled cable - trailing cable M12-M12
Assembled cable - dragline cable M12-M12
Note:
Application:
Ca
ble
Copper cables
Ordering data
Cat.5 PROFINET, PUR, M12-M12
Cat.5 PROFINET, PUR, M12-M12 female
Type Order No.
1025950005
1025950015
1025950030
1025950050
1025950100
1059330015
1059330030
1059330050
1059330100
Accessories
Type Order No.
1718411687
1718431687
Note
Technical data
≤
D
D.28
Assembled cable - dragline cable M12-RJ45
Assembled cable - dragline cable M12-RJ45 Ordering data
Cat.5 PROFINET, PUR, M12-RJ45 Type Order No.
1044470010
1044470015
1044470030
1044470050
1044470100
Accessories
Type Order No.
1718411687
1718431687
Note
Technical data
≤
Note:
Application:
Ca
ble
Copper cables
D
D.29
Assembled cable - dragline cable M12-open
Assembled cable - dragline cable M12-open Ordering data
Cat.5 PROFINET, PUR, M12-open Type Order No.
1025940015
1025940030
1025940050
1025940100
Accessories
Type Order No.
1718411687
1718431687
1719840000
1719850000
Note
Technical data
≤
Note:
Application:
Ca
ble
Copper cables
D
D.30
Assembled cable - rail cable M12-M12
Assembled cable - rail cable M12-M12
Note:
Description
Ca
ble
Copper cables
Ordering data
Cat.5, PUR, M12-M12
Cat.5 PUR, M12-M12 female
Type Order No.
1010850015
1010850030
1010850050
1010850100
1059340015
1059340030
1059340050
1059340100
Accessories
Type Order No.
1718411687
1718431687
Note
Technical data
D
D.31
Assembled cable - rail cable M12-open
Assembled cable - rail cable M12-open Ordering data
Cat.5, PUR, M12-open Type Order No.
1010840015
1010840030
1010840050
1010840100
Accessories
Type Order No.
1718411687
1718431687
1719840000
1719850000
Note
Technical data
Note:
Description
Ca
ble
Copper cables
Ca
ble
D
D.32
Overview - Fibre-optic cables
Overview - Fibre-optic cables (FO)
Fibre-optic cables are your best choice for working in harsh
industrial environments - if you
must ensure electrical isolation in the case of potential differences
Industrial FO connecting cables
...for flexible installations in machines
and plants in industrial applications
and difficult environments
your own connecting cables
Industrial FO trailing cables
...for applications subjected to
constant movement
pre-assembled cables
Industrial FO patch cables
...for use in industrial switching
cabinets or junction boxes
Industrial FO adapter cables
Industrial fibre-optic system cable
For flexible installations in and around
machinery and plants – for harsh,
industrial surroundings
Raw cables Assembled cables
Ca
ble
D
D.33
Overview - Fibre-optic cables
Ordering data for Fibre-optic cables (FO)
Type Breakout/ Plug-in connector Length
Zipcord left right
Industrial FO connecting cables Metre goods
- - 8946000000
- - 8956060000
Industrial FO trailing cables Metre goods 1 m 3 m 5 m 10 m
- - 8956070000
- - 8956050000
8876430010 8876430030 8876430050 8876430100
8876440010 8876440030 8876430050 8876440100
ST ST 8876450010 8876450030 8876450050 8876450100
ST ST 8876460010 8876460030 8876460050 8876460100
Industrial FO patch cables 1 m 2 m 3 m 5 m 10 m
8813300000 8813310000 8813320000 8876350050 8876350100
8813330000 8813340000 8813350000 8876360050 8876360100
ST ST 8813240000 8813250000 8813260000 8876370050 8876370100
ST ST 8813270000 8813280000 8813290000 8876380050 8876380100
Industrial FO adapter cables 2 m
ST 8813390000
ST 8813400000
Industrial FO system cables 10 m 50 m 100 m
8813450000 8876390500 8876391000
8813460000 8876400500 8876401000
ST ST 8813430000 8876410500 8876411000
ST ST 8813440000 8876420500 8876421000
Ca
ble
D
D.34
Galaxy Configurator for fibre-optic cable
Galaxy Configurator for fibre-optic cable
create fully-assembled cables adapted to your requirements and
specifications.
A variety of plug types in the following protective classes are
available:
IP 20 IP 67
You then have the choice of configuring a cable which is identical
on both ends, or with two different mating profiles, or with one end
left open.
also be customized:
The cable length can also be customized:
The cable configurator can also automatically create technical
data sheets for all of your customized cable variants.
All of your customized cable selections can be sent to
representative.
D
D.35
Bulk stock - FO connection cable
Bulk stock - FO connection cable Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8946000000
8956060000
Accessories
tools
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
9205330000
1032030000
Note
Technical data
Note:
Application:
Ca
ble
Fibre-optic cable
D
D.36
Bulk stock - FO trailing cable
Bulk stock - FO dragline cable Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8956070000
8956050000
Accessories
tools
Type Order No.
1689470001
1730560001
1719840000
1719850000
1718411687
1718431687
9205330000
1032030000
Note
Technical data
Note:
Application:
Fibre-optic cable
Ca
ble
D
D.37
Assembled cable - FO system cable SC-SC
Assembled cable - FO system cable SC-SC Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8813450000
8876390500
8876391000
8813460000
8876400500
8876401000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Fibre-optic cable
Ca
ble
D
D.38
Assembled cable - FO system cable ST-ST
Assembled cable - FO system cable ST-ST Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8813430000
8876410500
8876411000
8813440000
8876420500
8876421000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Fibre-optic cable
Ca
ble
D
D.39
Assembled cable - FO trailing cable SC-SC
Assembled cable - FO dragline cable SC-SC Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8876430010
8876430030
8876430050
8876430100
8876440010
8876440030
8876440050
8876440100
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Fibre-optic cable
Ca
ble
D
D.40
Assembled cable - FO trailing cable ST-ST
Assembled cable - FO dragline cable ST-ST Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8876450010
8876450030
8876450050
8876450100
8876460010
8876460030
8876460050
8876460100
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Fibre-optic cable
Ca
ble
D
D.41
Assembled cable - FO patch cable SC-SC
Assembled cable - FO patch cable SC-SC Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8813300000
8813310000
8813320000
8876350050
8876350100
8813330000
8813340000
8813350000
8876360050
8876360100
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Fibre-optic cable
Ca
ble
D
D.42
Assembled cable - FO patch cable ST-ST
Assembled cable - FO patch cable ST-ST Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8813240000
8813250000
8813260000
8876370050
8876370100
8813270000
8813280000
8813290000
8876380050
8876380100
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Fibre-optic cable
Ca
ble
D
D.43
Assembled cable - FO patch cable ST-SC
Assembled cable - FO patch cable ST-SC Ordering data
Core 50 μm
Core 62,5 μm
Type Order No.
8813390000
8813400000
Accessories
Type Order No.
1689470001
1730560001
Note
Technical data
Note:
Application:
Fibre-optic cable
Ca
ble
D
D.44
Ca
ble
Ac
ce
sso
rie
s
E
E.1
Contents
Accessories
Accessories Introduction E.2
Tools E.3
Cable tester E.11
Tool case E.12
SlimFix marker for active components and cables E.15
Dust caps E.17
Functional electronics: surge protection E.18
Functional electronics: switch-mode power supplies E.21
Cabtite cable entry system E.28
Ac
ce
sso
rie
s
E
E.2
Introduction
Overview of accessories
Like with other products from Weidmüller, choosing a
Weidmüller accessory means you can obtain everything from
one source.
Cable tester
... for detecting transmission errors
in a network
Tools
... for pressing conductors into
IDC terminals and pressing RJ45
contacts
Tool case
for assembling
Dust-protection plugs
for protecting empty ports
STEADYTEC® variants
SlimFix marker for active components and cables
... for identifying conductors, plugs
and devices
Cabtite cable entry system
System-based cable entry
Functional electronics: surge protection
... for protecting your network against
transient interference
mounting
Functional electronics: switch-mode power supplies
... for supplying power to your
network
Ac
ce
sso
rie
s
E
E.3
Hydraulic hole punch
Technical dataMaximum steel-sheet punching performance
Round holes up to Ø 85 mm
Round holes up to
Square holes up to
Rectangular holes up to
Maximum stainless-steel-sheet punching performance
Round holes up to
Tool data
Length / width / height mm
Weight kg
Punching force
Max. operating pressure bar
Including accessories (contents)
Information
Ordering dataVersion
Information
IE-KO-HAT
thanks to the three-way splitting
IE-KO-HAT2
2
2
2
2
75
1 spacer nut set (3-part)
1 bridge
Type Qty. Order No.
1 1966810000
Tools
Custom stamp for Industrial Ethernet Type Description Dimensions Qty. Order No.
connections 1 1966780000
1 1966790000
Custom shape for RockStar® 1 9204790000
Ac
ce
sso
rie
s
E
E.4
Cutting tools
Technical data
increases the quality of the cuts for smaller
cross-sections
cables, aluminium alloys and hard-drawn copper
conductors!
Max. cutting performance, copper cable
Solid (max. conductor cross-section) mm²/-
Stranded (max. conductor cross-section) mm²/-
Flexible (max. conductor cross-section) mm²/-
Flexible, stranded (max. conductor diameter) mm
Max. cutting performance, aluminium cable
Stranded (max. conductor cross-section) mm²/-
Stranded (max. conductor diameter) mm
solid mm²
Data / telephone / control cable
Max. outer diameter mm
Tool data
mm
Weight g
Note
max. 8 mm
max. 16 mm2
max. 16 mm2
max. 16 mm2
Version
Note
KT 8
Tool closed
Type Qty. Order No.
KT 8 1 9002650000
Ordering data
KT8
8
8
8
Tools
Ac
ce
sso
rie
s
E
E.5
Tools
IE-CST
1- and 2- step stripping in one operation
Stripping tool for round (shielded) data cables
of 2.5...8 mm ø
operation
CST
coaxial & round data cables
2.5 … 8
Type Qty. Order No.
IE-CST 1 9204350000
Type Qty. Order No.
Spare cutter cassette 1 9032020000
AM12
flexible copper cables with a diameter of up to
4 mm2
STP data cables and other round cables with
AM12
8
4
Type Qty. Order No.
1 9030060000
Type Qty. Order No.
Stripping tools
Technical data
Max. cutting performance copper cable
Cable model
Conductor cross-section
Conductor diameter mm
mm
Cutting performance
mm
Flexible copper cable mm2
Tool data
Length mm
Weight g
Information
Ordering data
Information
Accessories
Information
Ac
ce
sso
rie
s
E
E.6
Special stripping tools
Technical data
Max. stripping performance
Cable type
Conductor diameter -
Stripping length, max. -
Tool data
Length mm
Weight g
Note
Ordering data
Version
Note
Accessories
Note
LWL-stripax
Stripping and cutting tool for plastic fibre-optic
cables with 1-mm diameter inner conductor
stripping
M-D-STRIPAX LWL
...1
7.5
135
Type Qty. Order No.
1 9003750000
Type Qty. Order No.
Spare stripping blades 1 9003760000
Tools
Ac
ce
sso
rie
s
E
E.7
Insertion tool for twisted-pair cable
Technical data
For connecting twisted-pair cable to terminal
rails with IDC contacts e. g. in main and floor
structured building cabling.
mm
Weight g
Note
Version
Note
Note
PDT IE-FISP-V4
Type Qty. Order No.
1 9013970000
Type Qty. Order No.
2 9204370000
(without blade)
Type Qty. Order No.
1 9014050000
1 9013960000
1 9013990000
1 9013980000
1 9014000000
Type Qty. Order No.
Ordering data
PUNCH DOWN TOOL PDT
142
Fixing tool
115 / 28 / 28
21
Accessories
The punch-down tool has the following features:
Krone (Standard and scissors cutting function)
incision with cutting off of remaining conductor
Fastening tool for the hexagon cap nut from
STEADYTEC®
Tools
Ac
ce
sso
rie
s
E
E.8
Tools
Ordering data
Type Qty. Order No.
1 9205130000
Technical data
Weight
Ordering data
Type Qty. Order No.
SEE ESD 125 1 9204750000
Technical data
Weight
Ordering data
Type Qty. Order No.
1 9204760000
Technical data
Weight
Ordering data
Type Qty. Order No.
1 9204770000
Technical data
Weight
Ordering data
Type Qty. Order No.
1 9205140000
Technical data
Weight
Ordering data
Type Qty. Order No.
1 9205150000
Technical data
Weight 78 g
Ordering data
Type Qty. Order No.
1 9205210000
Technical data
Weight 547 g
SEE ESD 120
Electronic ESD diagonal-cutting pliers with
pointed head
SEE ESD 125
Electronic ESD diagonal-cutting pliers with
oval head
FZE ESD 130
Electronic ESD flat-nosed pliers
SZE ESD 130
Electronic ESD Snipe-nosed pliers
SVSE ESD 130
Electronic ESD angle -cutting pliers
SUPER CUT
Electronic diagonal-cutting pliers
KOF SET ESD
Electronic ESD case set
Contents:
Ac
ce
sso
rie
s
E
E.9
Pressing tools
Technical data
connectors
operation
Description of contact
Tool data
Length mm
Weight g
Note
Version
Note
Ordering data
TT 8 RS MP 8
For 8-pole shielded RJ45 plug
AWG 27...24
TT 8 RS MP 8
8
255
1251
Type Qty. Order No.
TT 8 RS MP 8 1 9202800000
Tools
Ac
ce
sso
rie
s
E
E.10
Crimping tools for other contacts
operation
Technical data
Tool data
Length
Weight
Note
Ordering data
Version
Note
Accessories
Note
IE-CT-SC-GOF / IE-CT-LC-GOF
Crimping tools for IP 67 plugs
IE-CT-SC-GOF IE-CT-LC-GOF
Type Qty. Order No.
1 9205320000
1 9205330000
Type Qty. Order No.
1 9205280000
1 9205290000
IE-CT-SC-POF / IE-CT-SC-GOF-P
Crimping tools for IP 67 plugs
connectors
IE-CT-SC-POF IE-CT-SC-GOF-P
Type Qty. Order No.
1 9205340000
1 9205350000
Type Qty. Order No.
1 9205300000
1 9205310000
Tools
Ac
ce
sso
rie
s
E
E.11
Tools
LAN USB
Device for testing
Ethernet cables for:
line interruption
core interruption
short-circuits
examination of the twist
LED display
174 g
Type Qty. Order No.
1 9205400000
Cable tester
Technical data
Functionality
Error display play
External voltage
Testable cable lenght
Supply tery
Connection for core
Weight basic device
Dimensions basic device
Remote box weight
Remote box dimensions
Weight testbox
Dimensions testbox
Ordering data
Note
Accessories
Note
IE-CT
Device for testing
Ethernet cables for:
interference voltage
line interruption
core interruption
short-circuits
crossed wires
examination of the twist
7-segment display
RJ45
185 g
31 g
Type Qty. Order No.
IE-CT 1 8808420000
Ac
ce
sso
rie
s
E
E.12
Tool case
Assembly case for fibre-optic connectors
you to assemble fibre-optic cables on-site.
Contents:
Crimping pliers for ST and SC plugs
Kevlar shears
Stripping tool for cable sheath and primary coating
Stripping tool for secondary coating
Fluorescent light with pluggable adapter
Polishing and cleaning fluid
Cleaning cloths
Cleaning rod
Polishing base support for pre-polishing and surface finishing
Polishing foils
Sapphire stylus
Ordering data
Type Qty. Order No.
1 1032030000
Accessories
Type Qty. Order No.
1033350000
1033360000
Ac
ce
sso
rie
s
E
E.13
Inkjet printer
outside, it is packed full of advantageous product features
that guarantee money savings and increased efficiency on the
inside.
A detailed look at the new PrintJet PRO
Cutting-edge technology Reliability as standard
The right choice for safety Ease of use
Ac
ce
sso
rie
s
E
E.14
Inkjet printer
The PrintJet PRO
electric connectivity. These markers can be used
for clear equipment identification on devices,
cables and connectors. The labelling makes
servicing, maintenance and troubleshooting much
easier. Water-based ink is used for the black or
spot colour printing. The print is crystal clear and
resistant to environmental influences.
The PrintJet PRO prints plastic markers in
MultiCard format. In combination with the
userfriendly M-Print® PRO software and the
attached loader, the printer becomes an essential
used, the subsequent fusing, as well as the printer
cartridge and ink have all been specially adapted
by Weidmüller for industrial use. The printer has
excellent long-term use capabilities, thanks to its
integrated loader.
PrintJet PRO
Technical data
PrintJet PRO
Type
Prints MultiCard markers
Technology
Print quality
Printer drivers Windows®
Print software M-Print®
System requirements Windows®
Feed Integrated loader
Fusing Thermal fusing
Interface
Power supply
Location
Weight 33 kg
Cartridge system
Scope of supply PrintJet printer, power cable, printer drivers, manuals (CD),
®
Ordering data PrintJet PRO
Type Order No.
1024050000
1001180001Accessories
Ink tank starter set, black 1027090000
Ink tank starter set, colour 1027110000
1027040000
Ink tank Cyan 1027050000
Ink tank Magenta 1027060000
Ink tank Yellow 1027070000
Ink tank fluid 1027080000
Ink tank PrintJet II 1858920000
1858950000
Ink tank PrintJet 1797460000
4062150000
Ac
ce
sso
rie
s
E
E.15
Markers for active and passive components
Markers for WaveLine components
For all Industrial Ethernet WaveLine components
Ordering data
Type Qty. Order No.
1609880000
Note:
Markers for IP67 and SAI components
Ordering data
Type Qty. Order No.
1912130000
Note:
Markers for IE-Line STEADYTEC®
STEADYTEC®
Ordering data
Type Qty. Order No.
1857440000
Note:
Markers for cables and wires
Ordering data
Type Qty. Order No.
1689470001
1730560001
Note:
Ac
ce
sso
rie
s
E
E.16
Cable markers and STEADYTEC®
TM-I for pre-assembled M12 cables
MultiCard markers for labelling transparent M12 TM-I sleeves
Ordering data
Type Qty. Order No.
1718431044
Note
AccessoriesType Qty. Order No.
Note:
LM MT DIN A5 for IE-Line STEADYTEC®
Cable labels made from polyester:
Ordering data
Type Qty. Order No.
white 1964070000
grey 1964080000
orange 1964090000
blue 1964100000
yellow 1964110000
green 1964120000
Note
AccessoriesType Qty. Order No.
Marking pen STI-Stift SW 0508401694
Note: self-adhesive, for labelling or printing
Ac
ce
sso
rie
s
E
E.17
IE-DPC
Dust Cap RJ45
Type Qty. Order No.
IE-DPC 8813490000
Dust-protection plugs for protecting empty ports
STEADYTEC® variants
Ordering data
Note
Dust caps
IE Line with STEADYTEC®
STEADYTEC® variants
Type Qty. Order No.
1965690000
1965700000
1963890000
1963900000
1963690000
1665750000
1058280000
1058310000
Ac
ce
sso
rie
s
E
E.18
Surge protection modules
This catalogue lists a small selection of surge protection and
power supply products chosen from the functional electronics
portfolio.
The complete offering of analogue signal converters, relays,
optocouplers, power supplies, surge protectors, fieldbus
components and interface units is listed in Catalogue 4
„Functional Electronics“.
Functional electronics
Ac
ce
sso
rie
s
E
E.19
Surge protection modules
DME 100Tx-4RJ
Ethernet Cat.5
Ω
≤ 5 ns
yes
no
yes
Miscellaneous
RJ45
RJ45
51 x 47 x 22
Type Qty. Order No.
1 8738780000
DME 100Tx-4RJ TS 35
Ethernet Cat.5
Ω
≤ 5 ns
yes
no
yes
Miscellaneous
RJ45
RJ45
Type Qty. Order No.
1 8830230000
Cat.5 surge protection
Technical data
max
Response time
Suppression diodes
Design
Type of connection
Storage temperature
Dimensions
Clamping range (rating- / min. / max.) mm2
Length x width x height mm
Note
Ordering data
Version
Note
Accessories
Note
Ac
ce
sso
rie
s
E
E.20
Surge protection modules
JPOVP Cat.5 M12
Ethernet Cat.5
1
2
3
4
M12
SPD
SPD
1
2
3
4
M12
IN OUT
≤ 5 ns
III
2
D-coded
CE
Each cable 1.5 m long
Type Qty. Order No.
Cat5 1 8805570000
Retaining clip
JPOVP Cat.6 IP20
Ethernet Cat.6
1
2
3
4
SPD
SPD
1
2
3
4
IN OUT
RJ45RJ45
≤ 5 ns
III
2
CE
Each cable 1.5 m long
Type Qty. Order No.
1 8805550000
Retaining clip
JPOVP Cat.6 IP67
Ethernet Cat.6
1
2
3
4
SPD
SPD
1
2
3
4
IN OUT
RJ45RJ45
≤ 5 ns
III
2
CE
Type Qty. Order No.
1 8805560000
Retaining clip
1-stage overvoltage
protection
The overvoltage protection is
plugged in to protect the sensitive
electronics in the signalling circuit.
The suppression circuit with varistor
suppresses the induced voltage in
solenoid valves.
The PE connection leaves the
housing via a separate line. The
green/yellow earthing cable must
be connected to the system east
to ensure reliable discharge of
interference pulses.
Technical data
Rated voltage
DC response voltage
Response time
Rated current
Protection level, signal line, wire to wire/PE
Protection level, supply, wire to wire/PE
General data
Pollution severity
Type of connection
Maße
Length x width x height mm
Note
Ordering data
Version
Note
Accessories
Note
Ac
ce
sso
rie
s
E
E.21
Switch-mode power supply units
CP SNT 24 W 24 V 1 A
+L
Thermistor
24 W
Surge / thermal cut-out
Screw connection
Type (Qty.=1) Order No.
9928890024
connectPower single phase
INSTAPOWER
W H
L
Technical data
Input
Input voltage
Input current
Input frequency
Making current limit
Input fuse
Surge protection
Output
max. output power
max. residual ripple
Surge protection
Mains failure bridge-over time
max. capacitance at output
Insulation coordination
Electrical isolation, output-earth
Electrical isolation, input-earth
Electrical isolation, input-output
General data
Storage temperature
Degree of efficiency at max. load
Standards
EMC standards
Clamping range (rating- / min. / max.) mm2
Length x width x height mm
Note
Ordering data
Note
Accessories
Note
Ac
ce
sso
rie
s
E
E.22
Switch-mode power supply units
CP SNT 48 W 24 V 2 A
+L
yes
48 W
ss
konst of max. output power,
automatic restart
Screw connection
Type Qty. Order No.
1 8739140000
connectPower single phase
INSTAPOWER
W H
L
Technical data
Input
Input voltage
Input current
Input frequency
Making current limit
Input fuse
Surge protection
Output
max. output power
max. residual ripple
Surge protection
Mains failure bridge-over time
max. capacitance at output
Insulation coordination
Electrical isolation, output-earth
Electrical isolation, input-earth
Electrical isolation, input-output
General data
Storage temperature
Degree of efficiency at max. load
Standards
EMC standards
Clamping range (rating- / min. / max.) mm2
Length x width x height mm
Note
Ordering data
Note
Accessories
Note
Derating curve
0 10 20 30 40 50 60 70 80
3
2.5
2
1.5
1
0.5
0
Ambient temperature (°C)
Cur
rent
(A)
Ac
ce
sso
rie
s
E
E.23
Switch-mode power supply units
CP SNT 70 W 24 V 3 A
Feedback
OVP, OTP
Output Current
Check & Share
current control
EMC Rectifier
Filter Flyback
Converter
OutputRecctifier
& Filter Vin AC
Signal Relay
1114
12
Vout DC
72 W
ss
konst of max. output power,
automatic restart
recommended with diode module
green LED
on mounting rail TS 35
Clearance: above/below ≥ 3 cm
Screw connection
For redundancy operation or to maintain the alert function, only
operate with diode module.
Type Qty. Order No.
1 8708660000
connectPower single phase
ECOLINE
L W
H
Technical data
Input
Input voltage
Input current
Input frequency
Input fuse
Surge protection
Output
max. output power
max. residual ripple
Surge protection
Mains failure bridge-over time
Parallel connection option
Status relay / Change-over contact
Insulation coordination
Electrical isolation, output-earth
Electrical isolation, input-earth
Electrical isolation, input-output
General data
Storage temperature
Degree of efficiency at max. load
Status indication
Standards
EMC standards
Installation advice
Weight
Clamping range (rating- / min. / max.) mm2
Length x width x height mm
Note
Ordering data
Note
Accessories
Note
Derating curve
0 10 20 30 40 50 60 70 80
4
3.5
3
2.5
2
1.5
1
0.5
0
Ambient temperature (°C)
Cur
rent
(A)
Ac
ce
sso
rie
s
E
E.24
Switch-mode power supply units
CP SNT 120 W 24 V 5 A
VIN AC VOUT DCEMC &
FilterRectifier
& Filter
Forward
ConverterOut Rectifier
& Filter
PWM
Controller
Photocoupler
Photocoupler
Voltage
feedback
OVP
Signal
Relay
12
1411
ss
konst of max. output power,
automatic restart
recommended with diode module
green LED
on mounting rail TS 35
Clearance: above/below ≥ 3 cm
Screw connection
For redundancy operation or to maintain the alert function, only
operate with diode module.
Type Qty. Order No.
1 8708670000
connectPower single phase
ECOLINE
L W
H
Technical data
Input
Input voltage
Input current
Input frequency
Input fuse
Surge protection
Output
max. output power
max. residual ripple
Surge protection
Mains failure bridge-over time
Parallel connection option
Status relay / Change-over contact
Insulation coordination
Electrical isolation, output-earth
Electrical isolation, input-earth
Electrical isolation, input-output
General data
Storage temperature
Degree of efficiency at max. load
Status indication
Standards
EMC standards
Installation advice
Weight
Clamping range (rating- / min. / max.) mm2
Length x width x height mm
Note
Ordering data
Note
Accessories
Note
Derating curve
0 10 20 30 40 50 60 70 80
6
5
4
3
2
1
0
Ambient temperature (°C)
Cur
rent
(A)
Ac
ce
sso
rie
s
E
E.25
Switch-mode power supply units
CP SNT 250 W 24 V 10 A
VIN AC VOUT DC
Signal
Relay
12
1411
FeedbackPhotocoupler
EMC
Input
Rectifier
& Filter
Forward
Converter
Output
Rectifier
& Filter
PWM
Control
ss
konst of max. output power,
automatic restart
recommended with diode module
green LED
on mounting rail TS 35
Clearance: above/below ≥ 3 cm
Screw connection
For redundancy operation or to maintain the alert function, only
operate with diode module.
Type Qty. Order No.
1 8708680000
connectPower single phase
ECOLINE
L W
H
Technical data
Input
Input voltage
Input current
Input frequency
Input fuse
Surge protection
Output
max. output power
max. residual ripple
Surge protection
Mains failure bridge-over time
Parallel connection option
Status relay / Change-over contact
Insulation coordination
Electrical isolation, output-earth
Electrical isolation, input-earth
Electrical isolation, input-output
General data
Storage temperature
Degree of efficiency at max. load
Status indication
Standards
EMC standards
Installation advice
Weight
Clamping range (rating- / min. / max.) mm2
Length x width x height mm
Note
Ordering data
Note
Accessories
Note
Derating-Kurve
0 10 20 30 40 50 60 70 80
12
10
8
6
4
2
0
Umgebungstemperatur (°C)
Str
om (A
)
Ac
ce
sso
rie
s
E
E.26
Switch-mode power supply units
CP SNT 500 W 24 V 20 A
VIN AC VOUT DC
Signal
Relay
12
14
11
EMI
Input
Rectiefier
& Filter
Forward
Converter
Output
Rectifier
& Filter
PWM Feedback
ss
konst of max. output power,
automatic restart
recommended with diode module
green LED
on mounting rail TS 35
Clearance: above/below ≥ 3 cm
2 kg
Screw connection
For redundancy operation or to maintain the alert function, only
operate with diode module.
Type Qty. Order No.
1 8778870000
connectPower single phase
ECOLINE
L W
H
Technical data
Input
Input voltage
Input current
Input frequency
Input fuse
Surge protection
Output
max. output power
max. residual ripple
Surge protection
Mains failure bridge-over time
Parallel connection option
Status relay / Change-over contact
Insulation coordination
Electrical isolation, output-earth
Electrical isolation, input-earth
Electrical isolation, input-output
General data
Storage temperature
Degree of efficiency at max. load
Status indication
Standards
EMC standards
Installation advice
Weight
Clamping range (rating- / min. / max.) mm2
Length x width x height mm
Note
Ordering data
Note
Accessories
Note
Derating curve
0 10 20 30 40 50 60 70 80
30
20
10
0
Ambient temperature (°C)
Cur
rent
(A)
Ac
ce
sso
rie
s
E
E.27
Switch-mode power supply units
CP SNT 1000 W 24 V 40 A
VIN AC VOUT DCEMC &
FilterRectifier
& Filter
Forward
ConverterOut Rectifier
& Filter
PWM
Controller
Photocoupler
Photocoupler
Voltage
feedback
OVP
Signal
Relay
12
1411
ss
konst of max. output power,
automatic restart
recommended with diode module
green LED
on terminal rail TS 35
Clearance: above/below ≥ 3 cm
4.4 kg
Screw connection
For redundancy operation or to maintain the alert function, only
operate with diode module.
Type Qty. Order No.
1 8862780000
connectPower single phase
ECOLINE
L W
H
Technical data
Input
Input voltage
Input current
Input frequency
Input fuse
Surge protection
Output
max. output power
max. residual ripple
Surge protection
Mains failure bridge-over time
Parallel connection option
Status relay / Change-over contact
Insulation coordination
Electrical isolation, output-earth
Electrical isolation, input-earth
Electrical isolation, input-output
General data
Storage temperature
Degree of efficiency at max. load
Status indication
Standards
EMC standards
Installation advice
Weight
Clamping range (rating- / min. / max.) mm2
Length x width x height mm
Note
Ordering data
Note
Accessories
Note
Derating curve
0 10 20 30 40 50 60 70 80
50
40
30
20
10
0
Ambient temperature (°C)
Cur
rent
(A)
Ac
ce
sso
rie
s
E
E.28
Cabtite cable entry system
HDC KT ...
Cable grommets, small
Technical data
Material, grey free from elastomers, halogens and silicone
Material, black elastomers with very high chemical resistance
Temperature range
Ordering data
Type Clamping range [mm] Qty. Order No. Order No.
grey black
1826480000 1827810000
1826490000 1827830000
7-8 1826500000 1827840000
1826510000 1827850000
Blanking plugs, small
1828170000 1828200000
KVT 32
KVT 32 and locknut for D-Sub 9
Technical data
Material Polyamide, free from halogens and silicone
Class of protection IP54, when the correct cable grommet is selected
Temperature range
Ordering data
Type Thread For grommet Qty. Order No. Order No.
small large white black
M 32 x 1.5 1 - 1826670000 1828270000
Locknut for D-Sub 9
M 32 x 1.5 1828250000 1828300000
Note: Please refer to catalogue 5 for the complete range.
HDC KEL 16
Cable entry strip
4 small grommets
Snap frame
Technical data
Material Polyamide, halogenfree, siliconfree
Colour black
Temperature range
Ingress protection class IP 54, when correct cable grommet is used
Ordering data
Type No. of grommet positions Order No.
small large Qty. black
8 1825910000
4 1825900000
Blanking plugs, small
1827770000