contact us for more information on · nace mr 0175 material tracability repair kits available...
TRANSCRIPT
Alco Valves and Action Sealtite are proud to present high-pressure valves to the UK market, suitable for any application with a gauge or transmitter, for measurement or isolation.
Alco manufactures an extensive range of technically advanced, high integrity valve products, with pressure ratings of up to 10,000 PSI.
It manufactures its products in the UK. This way, it is able to retainstringent quality control checks, provide accountability and absolute material traceability.
With agreements in place with many oil and gas majors, and significant investment in on-going Research and Development, Alco Valves has proven its place as a market leader and is set to stay ahead of the curve.
Contact us for more information on 01235 512500 or [email protected]
or visit our website www.actionsealtite.com
Made in the UK
Product List
Ball Valves
Needle Valves
Manifold Valves
DBB Valves
Check Valves
1
25
9
13
22
Made in the UK
Ball ValvesPB Series
PSB Series
UE Series
UB Series
3-Way SB Series
3-Way PSB Series
SN Series
1
PB Series
High Pressure Ball Valves
FLEXIBLE 3 PIECE DESIGN
RANGES:-40°C - 150°C up to 6,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATERIALSHANDLES
The ‘PB’ Series high-pressure three-piece ball valve: flexibility & reduced leak paths:
• Flexible 3 piece design for easy maintenance
• Design eliminates the use of additional fittings and unwanted potential leak paths
Rated at 414 bar, the ‘PB’ Series is a reliable, compact, and flexible isolation ball valve with many design options.
The ‘PB’ Series is a bi-directional floating-ball design that ensures a leak-proof shut-off on pressure or vacuum.
2
PSB Series
High Pressure Ball Valves
3 PIECE DESIGN
RANGES:-40°C - 150°C up to 6,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:ENDCONNECTIONSMATIERIALSTRIM & HANDLES
The Panel Mount range or ‘PSB’ Series is a variation of the standard ‘PB’ Series.
• Available with a variety of end connections
• Panel mounting facility onto a flat face• Easy to mount onto a control
panel or actuatorFeatures four panel mount holes:
• Eliminates the risk of the of the valve turning underneath the panel • Reduced stress of the thread joint means longer life• More accurate positioning • If access to the panel is limited, it is possible to fix with two holes
The ‘PSB’ Series is a bi-directional floating-ball design to ensure a leak-proof shut-off on pressure or vacuum.
3
UE Series
High Pressure Ball Valves
2 PIECE DESIGN
RANGES:-40°C - 230°C up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATERIALSTRIM
The ‘UE’ Series is a compact hybrid of the ‘A’ and ‘B’ Series ball valve range
• Lighter and more compact than the ‘UB’ series range• Available in a variety of configurations to suit many applications within the instrumentation and general engineering industries• Stainless steel lever-handle or marine coated, compact ‘T’ bar handle• Fully floating-ball for first time seal
The ‘UE’ Series is a bi-directional floating ball design to ensure a leak-proof shut-off on pressure or vacuum.
4
UB Series
High Pressure Ball Valves
2 PIECE DESIGN
RANGES:-40°C - 230°C up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATERIALS
Aware of the ever increasing operating pressures demanded by industry, Alco has developed the ‘UB’ range of valves, designedto accommodate the most challenging of applications.
The UB Series high-pressure valve has a working pressure of 10,000psi.
• Tried and tested rugged design for high-pressure applications • Panel mounting holes • Stainless steel handle • Available as full bore or standard bore• Options include a locking device
The ‘UB’ series is a Bi-Directional floating ball design to ensure a leak proof shut off on pressure or vacuum.
5
3-Way SB Series
High Pressure Ball Valves
FLEXIBLE 4 PIECE DESIGN
RANGES:-40°C - 230°C up to 1,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATERIALS
L-Port diverter valves are a cost effective way to safely divert high-pressure lines where several high two-way valves may have been used.
• Safe • Compact• Easy to install • For low and high-pressure
diversion• Available in bottom or side entry body formats• Light, quick and positive 90° action side entry • 180° action on bottom entry version• Low operating torque under pressure• Options include locking devices & actuator operations
The SB Series handles pressures up to 1,000 PSI
6
3-Way PSB Series
High Pressure Ball Valves
FLEXIBLE 4 PIECE DESIGN
RANGES:-40°C - 230°C up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATERIALS
L-Port diverter valves are a cost effective way to safely divert high-pressure lines where several high two-way valves may have been used.
• Safe • Compact• Easy to install • For low and high-pressure
diversion
• Available in bottom or side entry body formats• Light, quick and positive 90° action side entry • 180° action on bottom entry version• Low operating torque under pressure• Options include locking devices & actuator operations
The PSB Series are rated for pressures up to 6,000 PSI.
7
SN Series
Single Nut Mounted Ball Valve
RANGES:-40°C - 150°C up to 6,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATERIALS
Heavy-duty yet compact design
The SN Series comes with a pointerhandle to indicate direction of flow, pressure ratings of up to 6,000psi.
The SN Series’ single nut design offers many advantages:
• Straight-forward installation• Fast panel mounting• Max panel thickness is 11mm (dependant on valve size)• Easy to maintain
The ‘SN’ Series is a bi-directional floating-ball design to ensure a leak-proof shut-off on pressure or vacuum.
8
Made in the UK
Needle Valves UN Series
UN-V Series
UGV Series
9
UN Series
High Pressure Needle Valves
RANGES:-40°C - 230°C (427°C with Graphite option) up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATERIALS
The Precision-Made ‘UN’ Series: Single-Isolation Hand-Valve
This series features a clever metal-to-metal seat and body-to-bonnet connection. This provides superior, bubble-tight sealingcapabilities even at extreme pressures and extreme temperatures.
Extended Service Life• Non-rotating hardened tip
Extra Safety & Easy Maintenance• Unique anti-vibration cam-locking device at the body-to-bonnet connection
High Performance • Maximum working pressure: 10,000psi• Maximum working temperature up to 230°C or 427°C with Graphite option
10
UN-V Series
High Pressure Needle ValvesThe Precision-Made ‘UN-V’ Series: Single-Isolation Hand-Valve
This series features a clever metal-to-metal seat and body-to-bonnet connection. This provides superior, bubble-tight sealing capabilities even at extreme pressures andextreme temperatures.
Cost Effective
This design provides an economical method for venting pressure on the downstream, making it easy for calibrating gauges and pressureswitches.
Extended Service Life• Non-rotating hardened tip
Extra Safety & Easy Maintenance•
Unique anti-vibration cam-locking device at the body-to-bonnet connection
High Performance • Downstream-to-atmosphere venting facility• Positive no-slack stem-action
11
RANGES:-40°C - 230°C (427°C with Graphite option) up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATIERIALS
UGV Series
Multiport Gauge ValvesThe GV Series multiport gauge valve provides an economical method of mounting pressure gauges, manometers, pressure transducers, or transmitters.
• Provides vent and blanked port facilities or additional drains in a circuit or system• Both ½” & ¾” have ½” side port• Compact ¼” all around version
available
Clever & EconomicalUse a manometer and a samplemanometer or a transmitter and manometer simultaneously!
Pressure ResponsiveMulti-ring/piston packing for compression and pressure sealing.
RANGES:-40°C - 230°C up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:END CONNECTIONSMATERIALS
Additional Options • Hand-wheels• Locking devices • 50mm & 100mm extesions are available
12
Made in the UK
Manifold Valves U2VG Series
3VR Series
3VD Series
3VBD Series
5VR Series
5VD Series
5VBD Series
13
U2VR Series
2 Valve Needle Manifold ValvesTwo-Valve Isolating & Venting Manifold
Effectively Isolate InstrumentationSave time. Save effort. Save expense.
The manifold will isolate instrumentationand allow for venting, calibration, orremoval from the circuit without affecting the current process.
Extra Safety, Easy Installation & Maintenance
• Unique bonnet locking-cam • Mounting holes supplied as standard or pipe or wall fixing
RANGES:•-40°C - 230°C •up to 10,000 PSI
ASSURANCE:• NACE MR 0175• MATERIAL TRACABILITY• FIRE SAFE AVAILABLE• REPAIR KITS AVAILABLE
CHOICE OF:• MATERIALS (316 ss/ Duplex/Moneland other exotic matierials)
14
Applications
Ideal for gauge and static instrument applications such as pressure switches, pressure transmitters, and manometers.
U2VG Series
2 Valve Needle Manifold Valves
RANGES:-40°C - 230°C up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
The U2VG Series two-valve gauge manifold offering single process isolation and controlled venting
Unique Design Options
• Male inlet and female outlet connections • Mounting holes as an option to allow for fixing to pipe stands or enclosures • Locking devices are available• Slim-line and compact two-valve manifold
Long Life
• With all the long life features of the standard N Series Needle Valve, including multi-ring piston style packing and back sealing facility • All valves have two-piece non-rotating hardened tips, for bubble-tight shut-off and long service life
Extra Safety & Maintenance
• Positive no-slack stem-action• Unique bonnet locking-cam
15
3VR Series
3 Valve Needle Manifold Valves
RANGES:-40°C - 230°C up to 6000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
Three-Valve Isolation Manifold Remote Mounted (pipe to pipe)
The ‘3VR’ has two process isolation valves and one equalisation valve. Standard 2 x 1/2” inlet x 2 x 1/2”outlet all on 54mm instrument centres with 2 x 1/4” vent port.
Long Life
• Comes with all the long life features of the standard N Series Needle Valve, including multi-ring piston style packing and back sealing facility • All valves have two-piece non-rotating hardened tips as standard, for bubble-tight shut-off and long service life
Easy Installation & Maintenance
• 2 x 6mm diameter mounting holes supplied for wall or bracket, or for fixing to pipe stands • Unique bonnet locking-cam for extra safety and for ease of maintenance• Positive no slack stem action
Applications
Ideal for differential pressure transmittersand static instrument applications.
16
3VD Series
3 Valve Needle Manifold ValvesClever & Compact Design
The three-valve manifold offers all the features of Alco’s high-integrity needle-valve head-design. It’s slim and compact and is neatly incorporated into one common instrument manifold block. This can be mounted directly onto yourinstrument.
• Direct mounted three-valve manifold - instrument mount to pipe connection• “T” section body format allows for space between the instrument and process lines• Two isolation valves, and one equalising valve
Safe, Easy to Use & Maintain
• The 3VD is an offset equalise valve for ease of operation • Unique bonnet locking cam for extra safety and for ease of maintenance • Standard 2 x 1.2” inlet x 2 x 1/2” outlet all on 54mm instrument centres with 2 x 1/4” vent port
Long Life
• All valves have two-piece non-rotating hardened tips as standard, for bubble-tight shut-off • Positive no slack stem action
RANGES:-40°C - 230°C up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
17
3VBD Series
3 Valve Needle Manifold ValvesThe 3VBD Series has two isolation valves, and one equalising valve for differential pressure transmitters or
static instrument applications.
Clever & Compact Design
The three-valve manifold offers all the features of Alco’s high-integrity needle valve head-design. It’s slim and compact and it is neatly incorporated into one common instrument manifold block. This can be mounted directly onto your instrument.
• Direct mount-to-pipe connection• Compact-bodied instrument manifold block • Base-mounting holes allow fixing to the enclosure or mounting boss • Standard 2 x 1/2” inlet x 2 x 1/2” outlet on all 54mm instrument centres • Comes with 2 x 1/4” vent ports
Long Life
• All valves have two-piece non-rotating hardened tips, for bubble-tight shut-off and long service life• Positive no slack stem action
RANGES:-40°C - 230°C up to 6000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
18
5VR Series
5 Valve Needle Manifold ValvesRemote Mounted, Pipe-to-Pipe Configuration, Five-Valve Manifold Unique Design
• Features two isolation valves, two vent valves and one equalising valve • Standard 2 x 1/2” inlet x 2 x 1/2” outlet all on 54mm instrument centres
• Comes with 2 x 1/4” vent port• Two-valve configurations available for Oil & Gas • Mounting holes supplied as standard for wall or bracket mounting
With all the long life features of the standard N Series Needle Valve, including multi-ring piston style packing and back sealing facility.
Extra Safety, Long Life, & Easy Maintenance • All valves have two-piece non-rotating hardened tips, for bubble-tight shut-off & long service life • Unique bonnet locking cam for added safety • Positive no slack stem action
Applications
Ideal for differential pressure transmittersand static instrument applications.
RANGES:-40°C - 230°C up to 6000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
19
5VD Series
5 Valve Needle Manifold ValvesDirect Mounted Five-Valve Manifold Instrument Mount-to-Pipe Connection
Unique Design
• Features two isolation valves, two vent valves and one equalising valve • “T” section body format allows for space between the instrument and process lines
• The 5VD series offers 54mm (2 1/8”) instrument centres and is supplied with bolt pack and PTFE seals as standard
Long Life
• With all the long life features of the standard N Series Needle Valve, including multi-ring piston style packing and back sealing facility • All valves have two-piece, non-rotating hardened tips as standard, for bubble-tight shut-off and long service life. • Positive no slack stem action
Easy Installation Mounting holes supplied as standardfor wall or bracket mounting
RANGES:-40°C - 230°C up to 6000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
20
5VBD Series
5 Valve Needle Manifold ValvesDirect Style Block MountedFive-Valve Manifold, Instrument Mount-to-Pipe Connection
Unique Design
• Featuring two isolation valves, two vent valves and one equalising valve • Standard 2 x 1/2” inlet x 2 x 1/2” outlet all on 54mm instrument centres
• Comes with 2 x 1/4” vent port Extra Safety, Long Life, & Easy Maintenance • With all the long life features of the standard N Series Needle Valve, in cluding multi-ring piston style packing and back sealing facility • All valves have two-piece non-rotating hardened tips as standard, for bubble tight shut off and long service life • Unique bonnet locking-cam for extra safety and for ease of maintenance• Positive no slack stem action
Easy Installation
• Mounting holes supplied as standard for wall or bracket mounting
Materials & Seals
• The 5VBD series is supplied with bolt pack and PTFE seals as standard
Applications• Ideal for use with differential pressure transmitters and static instrument applications
RANGES:-40°C - 230°C up to 6000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYFIRE SAFE AVAILABLEREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
21
Made in the UK
DBB ValvesDBB B Series
DBB N Series
22
DBB B Series
FLEXIBLE 3 PIECE DESIGN RANGES:-40 °C - 150 °C up to 6,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLEFIRE SAFE
CHOICE OF:END CONNECTIONSMATERIALS
Double Block & Bleed ValvesThe Double Block & Bleed Manifold:
Approved to be supplied to many of the world’s major oil & gas corporations
Cost Effective Solutions
The design provides an economical method for mounting gauges with the facility to test and calibrate gauges and pressure switches.
Unique Design
• The DBB ‘B’ series offers ‘roddability’ due to its straight through flow passage • The vent valve incorporates the long-service Fire Safe ‘N’ Series needle valve, graphite multi-ring piston-style packing, and back sealing facility Easy Installation
Mounting holes supplied as standard for wall or bracket mounting.
23
DBB N Series
RANGES:-40 °C - 427 °C up to 6,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLEFIRE SAFE
CHOICE OF:MATERIALSEND CONNECTION
Double Block & Bleed ValvesThe Double Block & Bleed Manifold:
Approved to be supplied to many of the world’s major oil & gas corporations
The DBB ‘N’ series is a slim-line and compact single piece three-valvemanifold.
Cost Effective Solutions
The design provides an economical method for mounting gauges with the facility to test and calibrate gauges and pressure switches.
Long Life
• All valves have two-piece non-rotating hardened tips as standard for bubble-tight shut-off and long service life• Both isolation and vent valves incorporate the long-service Fire Safe ‘N’ Series needle valve, graphite multi-ring piston style packing, and back sealing facility
Options Available • Hand-wheels • Locking devices
24
Made in the UK
Check ValvesEC Series
EUC Series
25
EC Series
Check Valves
RANGES:-40 °C - 150 °C up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
26
The Non-Return Valve
• Designed for the prevention of back-flow in high-pressure systems• The ‘EC’ Series valve has a wide range of body and trim materials available
• Several types of sealing materials can be used to cope with most aggressive mediums• Having a soft primary seal means it is suitable for gases or liquids• Very compact unit, suitable for many arduous duties• Bubble tight close, with secondary metal-to-metal seal as standard
EUC Series
RANGES:-40 °C - 150 °C up to 10,000 PSI
ASSURANCE:NACE MR 0175MATERIAL TRACABILITYREPAIR KITS AVAILABLE
CHOICE OF:MATERIALS
Compression End Check Valve
The Non-Return Valve
• Designed for the prevention of back-flow in high-pressure systems • The ‘EC’ Series valve has a wide range of body and trim materials available
• Several types of sealing materials can be used to cope with most aggressive mediums• Having a soft primary seal means it is suitable for gases or liquids• Very compact unit, suitable for many arduous duties• Bubble-tight close, with secondary metal-to-metal seal as standard
27
If you have any requirements for full specification sheets you can
download these online at www.actionsealtite.com/information-centreor give our Alco team Keith or Niall a call on
01235 512500
+44 (0)1235 512500
www.actionsealtite.com
Unit 14 Moorbrook Southmead Idustrial Park DidcotOxfordshireOX11 7HP