CONTACTPrecision, LLC11200 Mesa Dr.Houston, Texas 77078O: 713.678.8900

Precision-llc.com

TECHNICAL SUPPORT832.405.3711mike.nations@precision-llc.com

EXPERIENCETRUE INNOVATION

BK is a third-generation, semi-premium connection, Designed for HIGH TORQUE frac strings.

BETTER BUTTRESS SEALINGModified buttress thread for tighter threadSealing and pin nose seal stabilization.

THEIRS API Thread Tolerance – Verified fit of several major insert manufacturers.

OURS Minimizes thread gap for better thread sealing. Custom Premium Insert.

BUTTRESS COMPATIBLEFor cost savings on hangers, float shoes, float collars, crossovers and custom tools.

SECONDGENERATION

FIRSTGENERATION

THIRDGENERATION

Steam Injection and Steam Assisted Gravity Drain Wells. Needed torque for installation and sealing. Needed pin nose contact for compressive strength due to thermal stresses.

Drilling with casing Wells. Needed torque and fatigue life for installation. Vertical and not very deep.

Horizontal Wells. Need torque for installation. Need hoop strength and better sealing for high frac pressures. Need fatigue life for rotating during installation through a curved bore.

12 MIL+

20+

8K+

FRAC STRENGTH WELLS PER MONTH

FEET INSTALLEDMONTHLY INSTALLS

Servicing over 20+ wells monthlyTensile , compressive and pressure strength for high pressure frac jobs

Over 12 million feet of couplings have been installed overall

Over 8,000 couplings installed each month

100%

FIELD PROVEN.

Burrs and Shavings.Burrs commonly form in the runout / black crested pin thread region. They are a major cause of galling and rough coupling make ups. They also form on the pin nose. Most shops make no effort to remove these.

Deburring.Deburring the runout/black crested threads and the pin nose is crucial to a trouble free make up. It ensures that the connection shoulders with a lower torque and can be made up multiple times without galling. This step is usually only performed on premium threads.

Saves End Users Time and MoneyIt requires time, tools and resources to deburr, which is why it is often skipped on semi premium. Without a deburr the cost is passed onto the end user who has to remake joints or lay down joints on a lousy make up. Deburred threads can be run faster (RPM) without galling.

FAST & CONSISTENTSHOULDER TORQUE INSTALLATION

Better threading techniques and coupling coatings allow for a quick low cost installation. The BK will run quickly, reducing the run time per well.

First Generation Relief Groove

Thinner cross section (weaker)

Fewer Engaged Threads (Pressure weak)

Dark Areas indicate unengaged thread regions

BK RELIEF GROOVE

BK ADVANCED RELIEF GROOVEEnsures more threads are engaged for maximum sealing. The thicker midpoint cross sectional area provides additional coupling strength.

Types of Semi Premium Failures – Over Torque SplitThe Coupling parts at the center from too much torque, load or combination of both.

Installed Stress

FracStress

The coupling will return to its original shape after the frac without deformations that accelerate corrosion and crack growth.

STRENGTHA low hoop stress design reduces the chance of coupling splits and leaks from high frac pressures. Stress is kept below material yield strength.

Extends the time it can be rotated through a dogleg at high RPM.

HIGH RPM FATIGUE RESISTANCE FROM LOW STRESS RUNOUT THREADS

HELICALLY ALIGNED ROOTSThe coupling thread roots are cut so they perfectly overlap at the center of the coupling. This alignment ensures the pin thread crests are always in a groove if they rotate past the coupling center.

THREAD INTERLOCKThe pin tooth will lock up past center as it is forced into groove that is it’s mirror image. The connection acts like a shouldered coupling.

US Patent No. 9,261,207 & 9,261,208

The thread interlock acts as an anti-rotation mechanism. It was designed to prevent the coupling from splitting or cracking. Many semi premium connections cross thread when rotated past the center.

The pin tooth crest can ride on top of the box tooth crest past the coupling center; the cross threading leads to a crack initiated washout.

TORQUEThe BK has better high torque running characteristics which will keep the coupling intact past pin nose yield. The strength comes from more engaged threads with a thicker center.

Over-Torque

RELIABLE MATERIALSUnlike first generation drilling with casing connections, the BK addresses the problems that have caused couplings to fail.

STRESS

ENVIROMENTALMATERIAL

PROPERTIES

ELEMENTS OFMATERIAL FAILURES

HYDROGENSALTWATER

ACIDEXPOSURE TIME &

TEMP.H2S

+ 80% YIELD STRENGTHBAD MAKE-UP & CROSS THREADINGFRAC PRESSUREHIGH HOOP STRESS

BRITTLENESSSTEEL CHEMISTRY

BK-HTTOUGHER, THICKER ANDBUILT TO LAST.

The BK-HT uses a thicker coupling with a larger OD to increase strength and torque resistance. A thicker coupling is stiffer and will stretch less axially and radially as the pin noses react to torque.

BK-FXSTRONGER, RELIABLE AND

MORE EFFICIENT.

The BK-FX has an integral shoulder and uses a thicker coupling with a larger OD to increase strength and torque resistance. The FX also provides more strength when utilizing high-collapse or enhanced burst strength.

BK® SAVES YOU TIME & MONEY.Operates quickly and smoothly, reducing your runtime per well, and overall production costs.

-HT

BK Product Variations

-FX

BK • Standard API Coupling Diameter• Good Clearance• High Torque

• Larger Coupling Diameter• Extreme Torque• Higher Frac Pressures for HC Pipe

• Larger Coupling Diameter• Extreme Torque• Integral Shoulder• Higher Frac Pressures for HC Pipe

Size Weight Wall Drift Dia. GradeCoupling

Dia.

Pipe & Connection

IDCoupling Length

Make Up Loss

Torque (ft-lbf) Yield Strength (x 1000lbs) Yield Pressure (PSI)

Optimum Yield Tensile Compression Internal Collapse4.5 11.60 0.250 3.875 L-80 5.000 4.000 7.875 3.938 2,150 5,950 267 267 7,780 6,3504.5 11.60 0.250 3.875 HC P-110 5.000 4.000 7.875 3.938 2,950 8,200 367 367 10,690 8,8304.5 13.50 0.290 3.795 L-80 5.000 3.920 7.875 3.938 2,800 7,800 307 307 9,020 8,5404.5 13.50 0.290 3.795 HC P-110 5.000 3.920 7.875 3.938 3,850 10,750 422 422 12,410 11,8104.5 15.10 0.337 3.701 L-80 5.000 3.826 7.875 3.938 3,600 9,950 353 353 10,480 11,0804.5 15.10 0.337 3.701 HC P-110 5.000 3.826 7.875 3.938 4,950 13,700 485 485 14,420 15,130

5 18.00 0.362 4.151 L-80 5.563 4.276 8.125 4.063 4,950 13,800 422 422 10,140 10,4905 18.00 0.362 4.151 HC P-110 5.563 4.276 8.125 4.063 6,850 19,000 580 580 13,940 14,3605 21.40 0.437 4.001 L-80 5.563 4.126 8.125 4.063 6,650 18,500 446 446 12,240 12,7605 21.40 0.437 4.001 HC P-110 5.563 4.126 8.125 4.063 9,150 25,450 613 613 16,820 18,870

5.5 17.00 0.304 4.767 L-80 6.050 4.892 8.250 4.125 4,500 12,450 397 397 7,740 6,2905.5 17.00 0.304 4.767 HC P-110 6.050 4.892 8.250 4.125 6,150 17,100 546 546 10,640 8,7305.5 20.00 0.361 4.653 L-80 6.050 4.778 8.250 4.125 6,000 16,750 466 466 9,190 8,8305.5 20.00 0.361 4.653 HC P-110 6.050 4.778 8.250 4.125 8,300 23,000 641 641 12,640 12,2005.5 23.00 0.415 4.545 L-80 6.050 4.670 8.250 4.125 7,300 20,200 483 483 10,560 11,1605.5 23.00 0.415 4.545 HC P-110 6.050 4.670 8.250 4.125 10,000 27,800 664 664 14,530 15,310

7 26.00 0.362 6.151 L-80 7.875 6.276 9.000 4.500 9,300 25,800 604 604 7,240 5,4107 26.00 0.362 6.151 HC P-110 7.875 6.276 9.000 4.500 12,800 35,500 830 830 9,960 7,5407 29.00 0.408 6.059 L-80 7.875 6.184 9.000 4.500 11,150 30,900 676 676 8,160 7,0307 29.00 0.408 6.059 HC P-110 7.875 6.184 9.000 4.500 15,300 42,500 929 929 11,220 9,7507 32.00 0.453 6.000 L-80 7.875 6.094 9.000 4.500 12,850 35,650 745 745 9,060 8,6007 32.00 0.453 6.000 HC P-110 7.875 6.094 9.000 4.500 17,650 49,000 1025 1025 12,460 11,890

9.625 36.00 0.352 8.765 J-55 10.625 8.921 9.625 4.813 11,000 30,500 564 564 3,520 2,0209.625 40.00 0.395 8.679 L-80 10.625 8.835 9.625 4.813 19,600 54,450 916 916 5,750 3,0909.625 43.50 0.435 8.599 L-80 10.625 8.755 9.625 4.813 20,000 63,250 1005 1005 6,330 3,8109.625 47.00 0.472 8.525 L-80 10.625 8.681 9.625 4.813 20,000 71,350 1086 1086 6,870 4,750

SPECIFICATIONS

Size Weight WallDrift Dia. Grade

Coupling Dia.

Pipe & Connection

IDCoupling

LengthMake Up

Loss

Torque (ft-lbf)

Yield Strength (x 1000lbs)

Yield Pressure (PSI)

Optimum Yield Tensile Compression Internal Collapse

4.5 11.60 0.250 3.875 L-80 5.250 4.000 7.875 3.938 3,000 8,350 267 267 7,780 6,350

4.5 11.60 0.250 3.875 HC P-110 5.250 4.000 7.875 3.938 4,150 11,500 367 367 10,690 8,830

4.5 13.50 0.290 3.795 L-80 5.250 3.920 7.875 3.938 3,950 10,900 307 307 9,020 8,540

4.5 13.50 0.290 3.795 HC P-110 5.250 3.920 7.875 3.938 5,400 15,000 422 422 12,410 11,810

4.5 15.10 0.337 3.701 L-80 5.250 3.826 7.875 3.938 4,950 13,800 353 353 10,480 11,080

4.5 15.10 0.337 3.701 HC P-110 5.250 3.826 7.875 3.938 6,850 19,000 485 485 14,420 15,130

5 18.00 0.362 4.151 L-80 5.750 4.276 8.125 4.063 5,500 15,250 422 422 10,140 10,490

5 18.00 0.362 4.151 HC P-110 5.750 4.276 8.125 4.063 7,550 21,000 580 580 13,940 14,360

5 21.40 0.437 4.001 L-80 5.750 4.126 8.125 4.063 6,650 18,500 446 446 12,240 12,760

5 21.40 0.437 4.001 HC P-110 5.750 4.126 8.125 4.063 9,150 25,450 613 613 16,820 18,870

5.5 17.00 0.304 4.767 L-80 6.300 4.892 8.250 4.125 6,950 19,250 397 397 7,740 6,290

5.5 17.00 0.304 4.767 HC P-110 6.300 4.892 8.250 4.125 9,550 26,500 546 546 10,640 8,730

5.5 20.00 0.361 4.653 L-80 6.300 4.778 8.250 4.125 8,400 23,250 466 466 9,190 8,830

5.5 20.00 0.361 4.653 HC P-110 6.300 4.778 8.250 4.125 11,500 32,000 641 641 12,640 12,200

5.5 23.00 0.415 4.545 L-80 6.300 4.670 8.250 4.125 10,200 28,350 483 483 10,560 11,160

5.5 23.00 0.415 4.545 HC P-110 6.300 4.670 8.250 4.125 14,050 39,000 729 664 14,530 15,310

7 26.00 0.362 6.151 L-80 7.875 6.276 9.000 4.500 9,300 25,800 604 604 7,240 5,410

7 26.00 0.362 6.151 HC P-110 7.875 6.276 9.000 4.500 12,800 35,500 830 830 9,960 7,540

7 29.00 0.408 6.059 L-80 7.875 6.184 9.000 4.500 11,150 30,900 676 676 8,160 7,030

7 29.00 0.408 6.059 HC P-110 7.875 6.184 9.000 4.500 15,300 42,500 929 929 11,220 9,750

7 32.00 0.453 6.000 L-80 7.875 6.094 9.000 4.500 12,850 35,650 745 745 9,060 8,600

7 32.00 0.453 6.000 HC P-110 7.875 6.094 9.000 4.500 17,650 49,000 1025 1025 12,460 11,890

SPECIFICATIONS

Size Weight WallDrift Dia. Grade

Coupling Dia.

Pipe & Connectio

n ID

Coupling Length

Make Up Loss

Torque (ft-lbf)Yield Strength

(x 1000lbs) Yield Pressure (PSI)

Optimum Yield Tensile Compression Internal Collapse

4.5 11.60 0.250 3.875 L-80 5.250 4.000 8.500 3.938 3,000 8,350 267 267 7,780 6,3504.5 11.60 0.250 3.875 HC P-110 5.250 4.000 8.500 3.938 4,150 11,500 367 367 10,690 8,8304.5 13.50 0.290 3.795 L-80 5.250 3.920 8.500 3.938 3,950 10,900 307 307 9,020 8,5404.5 13.50 0.290 3.795 HC P-110 5.250 3.920 8.500 3.938 5,400 15,000 422 422 12,410 11,8104.5 15.10 0.337 3.701 L-80 5.250 3.826 8.500 3.938 4,950 13,800 353 353 10,480 11,0804.5 15.10 0.337 3.701 HC P-110 5.250 3.826 8.500 3.938 6,850 19,000 485 485 14,420 15,130

5 18.00 0.362 4.151 L-80 5.750 4.276 8.750 4.063 5,500 15,250 422 422 10,140 10,4905 18.00 0.362 4.151 HC P-110 5.750 4.276 8.750 4.063 7,550 21,000 580 580 13,940 14,3605 21.40 0.437 4.001 L-80 5.750 4.126 8.750 4.063 6,650 18,500 446 446 12,240 12,7605 21.40 0.437 4.001 HC P-110 5.750 4.126 8.750 4.063 9,150 25,450 613 613 16,820 18,870

5.5 17.00 0.304 4.767 L-80 6.300 4.892 8.875 4.125 6,950 19,250 397 397 7,740 6,2905.5 17.00 0.304 4.767 HC P-110 6.300 4.892 8.875 4.125 9,550 26,500 546 546 10,640 8,7305.5 20.00 0.361 4.653 L-80 6.300 4.778 8.875 4.125 8,400 23,250 466 466 9,190 8,8305.5 20.00 0.361 4.653 HC P-110 6.300 4.778 8.875 4.125 11,500 32,000 641 641 12,640 12,2005.5 23.00 0.415 4.545 L-80 6.300 4.670 8.875 4.125 10,200 28,350 483 483 10,560 11,1605.5 23.00 0.415 4.545 HC P-110 6.300 4.670 8.875 4.125 14,050 39,000 729 664 14,530 15,310

7 26.00 0.362 6.151 L-80 7.875 6.276 9.625 4.500 9,300 25,800 604 604 7,240 5,4107 26.00 0.362 6.151 HC P-110 7.875 6.276 9.625 4.500 12,800 35,500 830 830 9,960 7,5407 29.00 0.408 6.059 L-80 7.875 6.184 9.625 4.500 11,150 30,900 676 676 8,160 7,0307 29.00 0.408 6.059 HC P-110 7.875 6.184 9.625 4.500 15,300 42,500 929 929 11,220 9,7507 32.00 0.453 6.000 L-80 7.875 6.094 9.625 4.500 12,850 35,650 745 745 9,060 8,6007 32.00 0.453 6.000 HC P-110 7.875 6.094 9.625 4.500 17,650 49,000 1025 1025 12,460 11,890

SPECIFICATIONS