construction accessories product catalogue - sig … mechanically fixed to scaffold boards. ... and...
TRANSCRIPT
Construction Accessories
Product Catalogue
Edition 1
www.sig-ca.co.uk
Contents2
Welcome to our new Construction Accessories Catalogue
Version 1.0
Offering you a vast range of top quality, brand leading, Construction Accessories and supported by our nationwide branch network.
We’re part of the SIG group, which includes Insulation, Technical Insulation, Fixings, Interiors, Mechanical and Electrical, Commercial Drainage and Construction Accessories businesses, meaning that you can source a huge range of products, all from your local SIG Construction Accessories branches.
At SIG Construction Accessories we pride ourselves on the service we offer to customers. You can trust us to provide a friendly, professional service and fast, responsive deliveries, locally or nationally. Our dedicated team are available with expert product and application support, including our specialist centres; Masonry, Concrete Repair, Geotechnical and Merchant, ensuring you get the right products for the right job, on time and within budget.
The Concrete Repair Centres offer specialist support with expert product advice and guidance from one point of contact and access to the full range of your preferred brands, nationwide.
WATERPROOFINGWe have a full range of Waterproofing products featuring the major brands within our national network of branches.
Our Technical Business Development team can assist you with the correct specification to ensure all your requirements are fully “watertight”.
Our Masonry teams can offer technical advice for various design systems. We have vast experience in supplying a comprehensive range of products from Wall Ties and Brickwork Reinforcement to Masonry Support and Windpost Systems, we can offer advice on the best solution for your building requirements.
CONCRETE REPAIR CENTRE
MASONRY CENTRE GEOTECHNICAL CENTREProviding the complete geotechnical solution, SIG Geotechnical Centre go beyond system design and product supply. With a mobile technical sales department to hand, providing free on-site support and advice, our dedicated in-house team are trained to offer the most cost effective and high performance systems, combined with the option for free PI cover on eligible designs.
Contents 3
4-15SITE SET UP & PROTECTION MATERIALS
34-61REINFORCEMENT & FORMWORK
112-123INSULATION & VENTILATION
26-33GROUTS & ANCHORS
62-87WATERPROOFING
148-161SEALANTS, JOINT FILLERS & CONSTRUCTION CHEMICALS
124-147CONCRETE REPAIR & PROTECTION
16-25GROUNDWORK ENGINEERING
88-111MASONRY SUPPORT & BRICKWORK ACCESSORIES
Site Set Up and Protection Materials4 Site Set Up and Protection MaterialsSIG Construction Accessories offers you a full range of ground and site protection materials, including specialist protection for carpets, windows and sanitary ware.
Products Page
Site Safety 5Site Set Up 6Protection Materials Protective Blankets 8Specialist Protection 10Cill Protection 11Accessories Site Accessories 12 Brickwork Accessories 15
4
Site Set Up and Protection Materials 5
Manufactured from ultra heavy duty hard wearing PVC embossed with a checker plate pattern for high level slip resistance. Light, easy to move around site, reusable, flexible and easy to fit while also being shock and noise absorbing and resistant to most acids and solvents. It is weather resistant for use outdoors and can be pressure washed.Edging strips are also available for access onto the checkertile for forklifts, platforms and other small plant hire.
Used to cover pre-formed service holes in precast concrete products to protect workforce from trip hazards and risk of serious injury. Manufactured from durable hi-vis PVC and designed to withstand site foot traffic .• Use Small Hole Covers in
conjunction with the Wedge & Tie Kit to ensure they are securely fastened in place
• Large Hole Covers require additional screw fixings to secure on-site
Site Safety
Cabin Site Mats
Hazard Tape
Hole Covers
Pipe Shutters
Warning tape complete with dispenser box.
Thickness Length Width13mm 800mm 600mm
Length Width Quantity33m 50mm 24 Rolls
Type Width Length Hole SizePipe Shutter 250mm 250mm 110mm diameter
Type Width Length Hole SizeSmall Cover 250mm 250mm Max. 200mm x 200mmLarge Cover 350mm 350mm Max. 300mm x 300mm
Pyramat
Made from heavy duty, hi-vis laminated rubber, Pyramat matting can be used to denote safe designated walkways around site and is visible even from high vantage points such as cranes. Its multidirectional pyramid design offers greater grip underfoot and allows water to drain in all directions – reducing slips and potential related injury on site. Pyramat can be pressure washed and mechanically fixed to scaffold boards.Thickness Length Width Weight3mm 10m 1m 36.2kg per roll
CheckerTile
Type Thickness Length Width WeightCheckerTile 14mm 500mm 500mm 6.8kg/m2
Edging Strips (Black or Yellow) 14mm 500mm - -
Designed to withstand heavy foot traffic and reduce amounts of dust and dirt from entering site cabins. Weather resistant for outdoor use. Easy to clean and can be pressure washed.
Clip into place using a single pin to ensure no gaps are left around oversized precast service holes once the pipework has been installed. Manufactured from durable PVC and specifically designed for easy installation on-site they are a cost effective alternative to traditional timber boarding. Cable ties can be used to hold Shutters inplace from above whilst concreting
Site Set Up and Protection Materials6
ALTISHIELD
Site Set Up
Exclusive to
Technical DetailsProfile Length 1mWall Thinness Approx 2mmColour YellowRecyclable 100%Storage Instruction Store flat
Application Range 8mm to 40mm bar Horizontal & Vertical
A unique product designed for protecting the ends of exposed rebar on site to prevent serious injuries. It is a cost effective and time saving alternative to individual rebar protection caps. It is extruded from heavy duty self-extinguishing UV stable PVC which is extremely durable and 100% recyclable. It ensures that all rebars are covered in long runs quickly, tightly and safely to protect workers on site. ALTISHIELD’s unique gripping teeth design makes it suitable for use on both horizontal and vertical reinforcing bars for 8mm to 40mm without any additional fixing.
Site Set Up and Protection Materials 7
Pointed Steel Pins Fencing Pins
Safety Barrier
Cube Moulds Curing Tank for Concrete Cubes
Slump Cone
Steel pins, pointed one end, plain other. For use with safety barrier.
Square section tamping bar. Metal and Polystyrene available.
Pointed one end, lamp iron curve other. For use with safety barrier.
Manufactured from heavy duty polythene. Available in orange and blue.
Curing tanks in a range of sizes for 110v and 240v supplies.
Slump cone, tamping bar and slump baseplate.
Diameter16, 20 or 25mm
Length1350mm
Type ThicknessTwo Piece Mold 100mmFour Piece Mold 150mm
Length Height50m 1m
Reduces the risk of impalement from exposed or poorly protected steel starter bars and is used as an alternative to mushroom caps. Light, robust and easy to store made from high impact polymer.Supports standard timber 4×2 allowing simple coverage of steel bars.
Type Bar Size Pack SizeStarter Bar Cap 6 – 18mm 250Starter Bar Cap 16 – 32mm 250Scaffold Pole Cap 25 – 50mm 125
Protection Caps
WISA Blocks
Protection Caps have been developed to protect workers from the serious injury that starter bars can cause. Large size suitable for scaffold bars.
Site Set Up and Protection Materials8
Length Width75m 1.5m
Frost Blankets Pallet Wrap/Cling Film
Tarpaulins
The thermal insulation effect of the frost blanket significantly reduces the loss of natural concrete hydration heat and thereby keeps the concrete warm long enough for a safe curing.
Length Width45.7m 1.37m
Hessian Blankets
Provides protection against frost damage. Can also be dampened down in hot weather to slow the drying process to avoid cracking. Use in conjunction with Ockwells Hessiclips to ensure a secure and safe application.
17 micron pallet wrap/cling film uses include the wrapping of bricks, blocks and other building materials on site.Suitable as a wrapping protection for steel beams and columns to protect from contamination.
A range of tarpaulins for temporary and long term protection.
Roll Size Box Qty400mm x 250m 6400mm x 300m 6
Protection Materials
Protective Blankets
Polypropylene board that is tough, durable, impact and chemical resistant, non-toxic and waterproof, does not stain and is suitable for all round protection. Simply and quickly cut, curved or creased, lightweight and easy to position.Flame Retardant option available.
Providing cover and impact protection, ideal for Kitchen and Sanitary ware and covering stainless steel stair parts and use with Easi-peel, easy tear tape on finished surfaces for both domestic and commercial uses.Flame Retardant option available.
Type Width Height Thickness Colour
Standard 1.22m 2.44m 2mm Black/Translucent
Standard 1.22m 2.44m 3, 4mm TranslucentStandard 1.22m 2.44m 5mm BlackStandard 1m (door size) 2 (door size) 2mm BlackFR 1.22m 2.44m 2, 3, 4mm TranslucentFR 1m (door size) 2m (door size) 2mm Translucent
Type Width LengthLD (10mm bubble) 1.2m 100mHD (30mm bubble) 1.5m 50mFR (10mm bubble) 1.2m 100m
TwinShield
Bubble Wrap
Site Set Up and Protection Materials 9
Length Width30m 1.5m
ALTIFLEECE Exclusive to
Protects mortar and brickwork against frost, heavy rain and strong sunlight• Unique patented design• Provides optimum conditions for curing• Durable and lightweight• Easy to use• Ideal replacement of hessian blanket• Tried and teased CERAM
Site Set Up and Protection Materials10
Temporary Protection Polythene for covering up materials to protect work on site.
Temporary Protection Polythene
Code Thickness Roll SizeTPS 50mu 4 x 25m500G 125mu 4 x 40m
Type Length Width ColourDust cover 167m 1.5m GreenCarpet Protector 100m 1.5m WhiteHard Floor Marine Grade 100m 1.0m Blue
Flame retardant temporary covering which can be used to protect a multitude of finished surfaces from construction damage and can be used on natural wooden floors, vinyl floors and sanitary ware, amongst many other internal surfaces. Ideal for interior site work with lower traffic levels with minimal use of machinery and provides interior protection for up to 9 months.
A range of flame retardant protection sheets accredited to LPS 1207. Certified by Loss Prevention Certification Board (LPCB) in compliance with Loss Prevention Standard (LPS 1207). Comprehensive range of grades to suit most applications and surfaces.MegaShield High Performance has improved anti-slip and high impact characteristics over the standard grade.
TecDura Stickymat
MegaShieldA low tack simple to install adhesive, tough polythene film designed to protect carpets as an alternative to dust sheets without creating a trip hazard, dispensers are available for application in large areas. Flame Retardant also available. Must be renewed every 4 weeks (not suitable for thick pile carpets).
Carpet Protection Film
Type Width LengthHeavy Duty 600mm 100m
900mm 100m1200mm 100m
TS63 Flame Retardant 600mm 100m800mm 100m1200mm 100m
Protection against foot traffic and impact, also provides a degree of water and slip resistance, easily cut with a knife and suitable for protecting carpeted areas, vinyl, timber, concrete, raised access, screeded floors, worktops and doors whilst maintaining a clean surface below.Manufactured from recycled paper this is a very economical and environmentally friendly product.
Temporary internal protection on building sites, factories, warehousing, showrooms and most domestic situations. Currently the only breathable material on the market fully accredited to LPS 1207. Complies with fire regulations associated with temporary protection materials.
FloorShield Standard FloorShield Flame Retardant (FR)
Length Width100m 1m
Length Width1m 50m, 100m1m 100m
Specialist Protection
Site Set Up and Protection Materials 11
Available in standard or flame retardant this protective film is for use on hard surfaces such as floors, walls, kitchen furniture and worktops as well as internal and external glazing during building construction or refurbishment. Using a special low tack adhesive back the film is designed to protect hard surfaces up to 24 weeks without leaving a residue.Always test the suitability of the Protection Film in an unexposed area before full application.
Hard Surface Film (Std and TS63 FR)
Type SizeHard Surface Protection Film 600mm x 100mHard Surface Protection Film FR 600mm x 100m
Temporary edge protection for doors, worktop edges, wall corners, columns, beams, timber edges and many other surfaces.Cardboard Edgeguards have a tough surface that can withstand a high level of impact – also available in ‘U-shaped’ angles.Foam Edgeguards are ideal when cushioned protection is needed if the item to be protected could be easily damaged.Flame Retardant Edge Protectors are made from 2mm TwinShield board certified to LPS 1207.
Fixing tapes available to suit all applications.
Edge Protectors Protection Tapes
Type Length Thickness DimensionsEdgeGuard Cardboard 2m 4mm 50mm x 50mmEdgeGuard Cardboard (‘U-shaped’) 2m 4mm 50mm x 50mm
x 50mmEdgeGuard Foam 2m 10mm 75mm x 75mmEdgeGuard TwinShield FR 1.5m 2mm 75mm x 75mm
Type Colour SizeSIG ConstructionAccessories Tape
- 50mm x 66m
Double Sided Cloth Tape - 50mm x 50mHigh Tack Flame Retardant Tape Black 50mm x 33mCloth Tape Black, Silver & White 50mm x 50mCloth Tape Black, Silver & White 75mm x 50mCloth Tape Black, Silver & White 100mm x 50mUltra Low Tack Tape - 50mm x 100mLow Tack Tape (Easi-Peel) - 50mm x 33mFoil Tape - 75mm x 50mTape Applicator - 50/75/100mm
Cill Protection
Site Set Up and Protection Materials12
Width Length Roll Size6mm 12mm 12m25mm 12mm 12m
For protection of bolt heads prior to concrete pours.
Formwork joint sealing strip.
A matt finish waterproof pressure-adhesive PVC tape, for use on all types of concrete formwork in climate conditions ranging from cold to tropical.
A foam groutcheck tape which provides a tight seal to butt joints in formwork that are unable to be sealed with PVC Groutcheck Tape.
Denso Tape
Adofoam
PVC Groutcheck Tape
Groutcheck Foam Tape
General purpose single solution cleaner to remove most adhesives, tape residue, grease and dirt that can be used on most surfaces It is recommended a small test is carried out and left to dry completely before moving on to larger areas.
Line marker paint in an aerosol spray. Used for site markings.
Industrial CleanerLine Marker – Spray
Accessories
Colour Size Box QtyBlue 750ml 6Red 750ml 6Yellow 750ml 6
Type SizeIndustrial Cleaner 500ml
Site Accessories
Width Length50mm 33m75mm 33m100mm 33m
Width Length Box Qty50mm 10m 3275mm 10m 24100mm 10m 16
Site Set Up and Protection Materials 13
For the fixing of steel reinforcements in concrete Epobar Resin is an injectable resin inserted in the drill hole (-50% volume) using an injection tool and its nozzle. The resin can be used in cracked or hollow concrete and in other solid building materials. The concrete can be dry or wet.
Epobar Resin
Used to extend a broom across wide slabs of uncured concrete without lifting or reaching.The trowel supports the weight of the broom, while the variable pitch bracket allows the broom to be lifted clear of the surface during extension. Attachments Available: Big-D, Pitch Bracket, Broom, Adaptor Bar, Handle, Spare Handle Clips
Reduces working time and eliminates power trowelling. Used with variable pitch bracket makes work easier. Snap-lock aluminium handles.Available Accessories: Pitch Bracket, Handle, Spare Handle ClipsSizes: 1200 x 300, 1500 x 300
Blue Glider with Brush Finish Attachment
Blue Glider (“Big-D”) Blue Steel
A fine haired brush for the easy application of formwork chemicals and brush applied waterproof membranes.
Turks Head Brush
Type1200 x 3001500 x 300Pitch Bracket Adjustable Bracket HandleSpare Handle Clips
Heavy duty ribbed magnesium float with rounded ends to prevent gouging.
A robust aluminium construction straight edge with grips for tamping and levelling concrete. Lengths from 2-6 metres.Handles are also available to give comfort and firm control. Supplied in pairs.
Construction Duty Magnesium Round Ended Bull Float
Straight Edge
Steel bristle concrete finishing brushes to the latest DOT specifications.
Concrete Finishing Brush
Construction duty wire brush with scraper back edge.
Wire Brush
Site Set Up and Protection Materials14
Description SizeToothed one side, plain other side 560mmPlain blade with hook 495mmHandles 1370mm
Material Finish SizeStainless Steel Turned up ends 150 x 75mmBlue Steel 10mm radius 150 x 100mmBlue Steel 10mm radius 150 x 150mmBlue Steel 13mm radius 150 x 100mm
For rapid placing and raking of freshly poured concrete. Supplied with handle. Replacement handles available.
For finishing of concrete edges, adding strength and improves weather resistance.
Concrete Placer and Rakes Edging Tools
Plastic bucket with easy pouring lip and comfortable grip handle.Various sizes available
Removes the need to pour a kicker. Spacer/spreader for wall joints. M16 threaded bar allows exact alignment and ensures high strength. End caps are to be applied firmly to ends of the threaded bar, providing a 50mm cover.Crimped Anchor and End Cap available.Various sizes available
In addition to power tools, we can supply a massive range of drill bits and power tool accessories in various sizes and to different specifications.
Builder Bucket Steel Kickers (Adjustable)
Drill bits
Heavy duty ring magnets for removing wire and nails from shutters prior to concrete placement.OD Sizes: 45, 60mm
Formwork Magnets
Digital dial Maximum-Minimum Thermometer with Quick set press button. Can measure temperatures between -40/+ 150 x 0.1°C with integral probe and comes with protective sleeve with pocket clip
Thermometers
Aluminium hand scoop for use with cube moulds and testing equipment.
Concrete Scoop
Produced in durable acrylic plastic. Monitors horizontal and vertical movements across cracks.
Tell-Tale
Carborundum rub-block complex with plastic handle for greater comfort.Size: 150 x 75mm
Carborundum Rub-Block
Site Set Up and Protection Materials 15
Size Pack Quantity
50 x 25mm 250No. on a roll and 24 rolls in a box (6000 pads per box).
Length Width40mm 6mm60mm 8mm
Size Thickness5.5 x 38mm 12mm
The black Teplo-Clip should be used with the TeploTie range.
Tie Neoprene Isolation Pad. Self Adhesive.
Tek Screws are available for fixing into steel.NOTE: Available with or without isolation washer.
Hammer Screws are available for fixing into concrete.
Black Teplo Clip
Isolation Pads Tek Screws
Hammer Screws
Used on plain-ended wall ties at vertical movement joints. A tie will restrain the masonry but the sleeve will allow the masonry to expand or contract. A 120mm long sleeve will be suitable for most applications. Other sizes available to special order.
The red Insulation Retaining Clip will fit all standard stainless steel wall ties.
Debonding Sleeves Insulation Retaining Clips
Length Pack Size120mm Bags of 250
Size Pack Size80mm diameter Bags of 20 or 250
Brickwork Accessories
Groundwork Engineering1616 Groundwork EngineeringOur range of civil engineering products have been used in the industry for many years, providing products for separation, reinforcement protection, drainage and erosion control used in major civil engineering infrastructure projects including road, rail and bridges.Providing the complete geotechnical solution, our Geotechnical Centre go beyond system design and product supply, with a mobile technical sales department to hand, providing free on-site support and advice. Our dedicated in-house team is trained to offer the most cost effective and high performance systems, combined with the option of free PI cover on eligible designs. This makes the Geotechnical Centre service unique in its field.
Products Page
Geotechnical Geotextiles 17Geogrids 18Walls/Gabion Baskets 18 Permeable Paving 18 Erosion Control 19 Cellular Confinement System 19 Root & Weed Barriers 20 Geocomposite Drainage 20 Clay Lingers & Plastic Membranes 21 Grass Protection Mesh 21 Gas Barriers 21
Insulation 24
Groundwork Engineering 17
Geotechnical
Geotextiles
A range of non-woven thermally bonded filtration, separation and reinforcement geotextiles, which provide a high level of engineering performance.With high water flow and excellent filter properties, combined with superb strength and elongation, Geotec TB offers outstanding performance.
A woven geotextile used as a separator in all types of civil engineering, building and landfill projects. Its woven construction delivers high tensile and puncture strengths, making it particularly suitable in separation applications.Manufactured from extruded polypropylene tapes that are resistant to all naturally occurring soil acids and alkalis and are unaffected by bacteria and fungi.Can be used below access roads (both temporary and permanent) to create a barrier on which to place the crushed stone foundation layer.
A range of high performance needle punched fabrics providing high puncture resistance, making it ideal for use in landfill and membrane protection applications.
A cost effective warning barrier to alert of contaminated land or buried services.This bright orange woven textile combines excellent separation performance with a highly visible appearance to make it an ideal indicator layer.
Available in woven and non-woven options suitable for horticultural, landscaping and domestic applications uses.They are designed to separate materials and suppress weeds while allowing the passage of water, air and nutrients through.Size: 1 x 14m, 4.5 x 11.1m, 2 x 25m and 2 x 50m
A range of woven polypropylene geotextiles which act as an excellent separator and reinforcement membrane preventing the loss of expensive stone to the soil below, no matter what ground conditions or what stone is used. High strength wovens are available for reinforcement applications.
Geotec TB Geotec 90
Geotec NP Geo Signal
Mini PacksGeotec W
Groundwork Engineering18
Geogrids
Permeable Paving
Absorbs tensile forces induced into the soil and distributes the stresses through the high tensile strength bars. The Secugrid apertures allow for strike through of the cover soil material which then interlock with the bars, providing confinement of the overlaying granular/soil material due to the strength and stiffness of the ribs. This interlocking of the soil combined with the very high product modulus, minimises soil deformation and ensures the integrity of the application. Large aperture grids are available where the fill has a partial size of over 75mm.
Lightweight high load paving reinforcement system manufactured from recycled plastics with a cellular construction. Envirotrak’s unique interlocking design coupled with high loading strength provides a strong and robust surface. Can take loads of up to 400 tonnes per square metre. It is extremely versatile and may be used in a wide range of applications. The interlocking design not only means it is easy to piece together but also stays securely in place when being installed.Envirotrack Premium heavy duty also available withstanding loads of up to 500 tonnes per square meter
Biaxial Geogrid incorporating a non-woven geotextile. Combigrids are mainly used in conjunction with soft and low CBR (California Bearing Ratio) soils where soil reinforcement in conjunction with separation and filtration is required. The main advantages over using separate products are that Combigrid reduces handling, storage and installation time and costs.
Secugrid
Envirotrak
Combigrid
Walls/Gabion Baskets
Gabions and Mattresses offer a fast effective solution for many earth stabilisation problems. Gabion systems are widely used in many applications including retaining walls, erosion control, scour prevention, landscaping and for coastal protection, in applications such as river and sea control. The strength and flexibility of the welded mesh helps withstand and absorb the forces generated by retained earth or water flow.
Gabions and Mattresses
For expanded polystyrene lightweight infill solutions see Fillmaster page 24.
Groundwork Engineering 19
Erosion Control
Environmentally friendly solutions for even the most severe erosion applications. Biodegradable matting acts as a protection to the slope preventing erosion and the loss of expensive soil and giving slope stability as well as providing an ideal micro climate for seeds to germinate. The materials have a lifespan of between 1 and 5 years with weights ranging from 150-1500grams.
Provides the ideal solution to prevent silt laden run-off, site debris and other pollutants contaminating the surrounding landscape and natural watercourses which may result in significant environmental damage.Prevents contamination of the area surrounding site, by capturing any silt/soil on site behind the fence allowing any silts to settle, while the robust woven, UV stable membrane allows water to filter through.
A non-biodegradable soil retention matting manufactured from Polypropylene.Formed in a 3 dimensional structure allowing soil filling over its entire structure, providing reinforcement to the slope whilst giving root support, lessening the effect of rain bombardment and preventing seed and soil loss.
Slope Guard Biodegradable
Silt Fences
Slope Guard GMAT400
SIG Web is a multi-purpose strong and robust cellular confinement system. It has a 3-dimensional honeycomb structure made from strips of extruded polypropylene forming a lightweight expandable structure. Its ultrasonically welded joints deliver extremely high tensile strengths, improving soil bearing capacity up to 17 times.
Load BearingAs a surface reinforcement system SIG Web provides a strong and stable load bearing surface giving the soil up to 17 times its normal load bearing capacity. Supporting and isolating the load bearing surface from the weaker sub grades below, SIG Web solves the load bearing issue whilst giving an aesthetically pleasing finish.
Erosion Control And Slope StabilisationWhen used on embankments SIG Web increases the soil’s natural resistance to erosion whilst also providing protection to the root zone.
Tree Root ProtectionThe Web provides a stable and firm surface for roads and paths in areas where there are trees by evenly spreading the load reducing sub soil compaction above the roots. The permeable structure allows the migration of water and nutrients to the tree root to encourage healthy growth.
Cellular Confinement System
SIG Web
Groundwork Engineering20
Root & Weed Barriers
A range of permeable and impermeable root barriers. Tough and durable, these liners prevent damage by invasive root growth giving protection to structures such as roadways, pipelines and housing.
High filtration properties coupled with excellent puncture resistance makes them ideal weed suppressants by massively reducing root penetration into the soil but allowing water and nutrients to enter the soil. These control weeds without the need for the use of chemicals. Available in mini packs for domestic use in garden or patio applications through to large 450 square metres rolls for large landscaping projects.
Unique permeable root barrier consisting of a layer of copper sandwiched between two layers of geotextile. Predominantly used in the control of Japanese Knotweed. The copper foil releases inert chemical traces which shoots and roots are adverse to.When installed correctly, Root X enables contaminated areas to be completely sealed off and built over.
High performance barrier against invasive plants such as Japanese knotweed. Ideal for the containment of Japanese knotweed on contaminated land, it also delivers a highly effective solution for controlling other invasive weeds on solar farms, housing and many more infrastructure products, by completely covering the land prior to the installation of the PV framework and solar panels.
Root Barriers Weed Control Fabrics
Japanese Knotweed Barrier – Root X
Japanese Knotweed Barrier – Plantex® Platinium
SIG Geotechnical Centre offers an extensive range of geocomposite drainage and gas venting layers. Replacing the traditional method of granular stone drainage the Geoflow system offers real cost savings in both material and installation costs.
Geocomposite Drainage
Geoflow is made up of a high strength, high flow cuspated HDPE core which forms a void to drain or vent with a filter geotextile on one or both sides. When used as part of a waterproofing system Geoflow acts as both a drainage layer reducing water pressure and as protection to the waterproofing membrane.It is ideal for retaining walls, buried structures, underground reservoirs, roof gardens and tunnels. Geoflow can also be used on landfill sites and highway edge drainage.
Geoflow
Groundwork Engineering 21
Grass Protection Mesh
Grass reinforcement meshes that provide a range of performance levels from light caravan park usage through to heavy duty reinforcement mesh used for access roads and car parks.Manufactured from HDPE which makes the product tough and durable whilst also being flexible and lightweight for ease of installation. Can be used to either temporarily or permanently reinforce grassed areas, preventing rutting and other damage caused by vehicle and pedestrian traffic.
Turfguard
Clay Liners & Plastic Membranes
High performance structural waterproofing system which consists of Sodium Bentonite waterproofing compound sandwiched between two layers of Geotextile. The special property of Sodium Bentonite is its ability to swell when it comes into contact with water which causes the dry clay to convert into an impervious gel.
Can be produced from a number of materials and made in several different thicknesses and can have a textured or smooth finish. Complete seal against even the most toxic substances; can be prefabricated to suit your exact project requirements. Geomembranes liners are also ideal for use in applications such as ponds, water storage areas and lagoons. Attenuation tank membranes and geotextiles are also available, these can be prefabricated for quick and easy installation.
A geosynthetic clay liner designed for use in large applications such as reservoirs. It has additional Bentonite impregnated into a 50cm overlap so installation simply consists of unrolling and overlapping with no further manual involvement. Bentofix NSP 4900 consists of a layer of Sodium Bentonite held between two layers of geotextiles. The layers are mechanically bonded together using a patented needle punching process.
Bentofix NSP 4900
Geomembranes
Bentofix BFG 5000
For Sika Bentoshield please see page 66.
Gas Barriers
A high performance self adhesive membrane for resisting methane, radon and CO2, and preventing water entering buildings. Provides a vapour and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.Type SizeProofex Total Membrane 2 x 25m, 2 x 50mProofex 3000MR 1 x 20m
Proofex 3000MR Total Membrane
Double-sided butyl tape for sealing of side and end laps and for use in detailing work.Size: 50mm x 30m
MDPE sheathing, which encapsulates an aluminium foil layer.
Ancillaries – Proofex Total Tape
Ancillaries – Proofex Total Top Hats
Groundwork Engineering22
Waterproofing membrane for basements and substructures. 70m hydrostatic pressure resistance with ultra low moisture transmission rate. Methane, CO2 and radon gas protection. Suitable for application to damp surfaces and green concrete.
Bituthene® 8000
Roll Size Primer Application Temp Range1 x 20m (20m2) B2 +5 to +35°C
Safe solution for the protection of buildings against radon, carbon dioxide and low levels of methane gas when installed in accordance with the relevant codes of practice.Size: 4 x 12.5m
Low Permeability Gas Membrane
A safe solution for the protection of buildings against methane, radon and carbon dioxide, when installed in accordance with the relevant codes of practice. Visqueen Gas barrier is a multi-layer reinforced polyethylene membrane with an integral aluminum foil. For ease of identification on site Visqueen Gas Barrier is coloured blue on one side and silver on the reverse. The barrier combines strength and performance with flexibility and easy installation.Size: 2 x 25m
Gas Barrier Membrane
Designed to comply with current guidance on Hydrocarbons.Manufactured using the latest extrusion technology and drawing on our extensive knowledge and expertise in gas protection, Visqueen has developed a new flexible barrier membrane suitable in brownfield applications that are affected by Hydrocarbons.The product is available in SWS roll format, 1.4 x 50m, and in 2 colours; white to reduce linear expansion in hot weather or grey.Size: 1.4 x 50m Colours: White, Grey
GX Flexi Hydrocarbon Barrier
A double sided butyl based jointing tape. The use of a single release paper assists ease of application on site.Size: 50mm x 10m
Gas Barrier Jointing Tape
A cold applied, high density polyethylene film bonded to aluminium foil and coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone release paper.The product applied correctly, is capable of providing the levels of protection required for grades 1, 2, 3 & 4 basements.Size: 1 x 20m
Sheetseal GR
A loose laid damp proof membrane for the protection against damp and common ground gas. Hyload Gastite LL DPM offers a safe solution for the protection of buildings against methane, radon and carbon dioxide.Also Available:Gastite double sided: 50mm x 10mGastite foil backed: 75mm x 50mTop hats: various sizes Size: 1.6 x 30m
Hyload Gastite LL DPM
A self adhesive damp-proof and tanking membrane for protecting structures against the ingress of moisture and methane, carbon dioxide and radon gases. It can also be used as a gas resistant DPM.Size: 1 x 20m
Hyload Tanking Membrane Gastite SA
Damp proof membranes see Waterproofing page 69.
Groundwork Engineering 23
An unreinforced polyethylene membrane, suitable for use in the protection of buildings from the ingress of Radon gas. Acts as an effective passive radon membrane in most typical applications and will also act as a damp proof membrane. Roll Size: 25 x 4m
Visqueen Radon Protection System
A flexible high performance membrane that is a barrier to CO2, methane and hydrocarbons/VOC’sSize: 1mm x 2.44m x 41m
Ultimate VOC BLOK
A grey, one-part elastomeric polymer modified liquid that dries to form a black, flexible membrane. Size: 5.25 Litres
Liquid Gas Membrane
A flexible polyethylene DPC with an aluminium foil designed to prevent the transmission of carbon dioxide, radon and methane gases. This is in addition to the products usage as a damp proof course. Resistance to carbon dioxide, radon and methane is achieved by an integral aluminium film.Size: 300-1000mm x 30m
Gas Resistant (GR) DPC A self adhesive membrane designed to prevent the transmission of radon and methane gases.Size: 1 x 20m, 2 x 50m
Gas Resistant Self Adhesive Membrane
A single sided jointing tape suitable for securing laps and joints. Size: 75mm x 50m
Foil Backed & Standard Girth Jointing Tape
Where sub-floor depressurisation is required a Radon Sump should be used. This is a prefabricated plastic sump, to which pipe work is connected.Size: 220 x 430 x 430mm
Visqueen Radon Sump
Used to provide an effective seal around service pipe penetrations. They are available in a range of sizes, the typical size being 110mm diameter.Various sizes available
Visqueen Top Hat Units
Visqueen Gas MembranesType BRE211 Radon Amber 1 CO2/CH4 BS8485/Amber 2 CO2/CH4 C748 VOCs Radon Protection System •Low Permeability Gas Membrane • •GX Flexi Hydrocarbon Barrier • • •Liquid Gas Membrane • • •Gas Barrier Membrane • • •GX Geomembrane • • •Ultimate VOC BLOK • • • •Gas Resistant Self Adhesive Membrane • • •Gas Resistant DPC • • •
Groundwork Engineering24
The material is particularly beneficial in the following situations where its use will obviate the need for either specialised foundations, or long surcharge periods designed to preload the ground and reduce settlement problems following construction:
• Areas adjacent to existing embankments.• Areas of unstable ground.• Areas of weak or compressible soil.• Sites where access is difficult or restricted.• Transition zones between bridges or underpasses and
normal fill materials.
Fillmaster
Insulation
Groundwork Engineering 25
Insulslab SFRC (Steel Fibre Reinforced Concrete) is an innovative high quality, patented foundation system that is suitable for use on a wide range of soil types. lnsulslab SFRC is a complete system, based on a type of raft foundation which comprises a series of interlocking expanded polystyrene pods, forming a rigid ‘waffle’ shaped slab. Steel fibre reinforced concrete is poured over the top to form the finished foundation.The lnsulslab SFRC system is quicker to install, offers excellent thermal performance and significant cost savings when compared to traditional methods of foundation production.The foundation system facilitates easy compliance to Part L/Section 6 of the Building Regulations, without the need for an additional layer of insulation and screed.
The steel fibre reinforced concrete provides many benefits:• Excellent impact strength• Maximum edge protection• Improved fatigue endurance• A higher level of shrinkage and crack control• Greater bearing capacity• Steel fibres do not damage power floats or concrete
pumps
Insulslab SFRC
Grouts & Anchors2626 Grouts & Anchors
Products Page
GroutsCementitious Grouts 27Epoxy Based Anchor Grouts 29Anchors Chemical Fixings 31Steel Anchors 32 Lighweight Anchors 33
Precision GroutingSIG Construction Accessories supply cementitious, polyester or epoxy products for the alignment and levelling and gap filling in the following and many more applications:• Crane Rails• Capstans• Landing Lights• Under-rail Pads• Sleeper Bearings• Bridge Bearings• Balustrades• Crash Barriers• Pump Bases• Sluice Gates• Machine Bedding• Baseplates
Anchoring & FixingWe offer products to aid the high strength and corrosion resistant anchoring of bolts and bars in concrete rock, masonry or brickwork particularly where speed of installation and early application of load is required. Our range includes cementitious, polyester, epoxy, cartridge systems and capsules for use in:• Anchoring of Bolts• Anchoring of Rebar• Anchoring of Dowels• Fixing of Cavity Wall Ties• Fixing to Soffits and Walls• Fixing Landing Lights• Fixing of Threaded Studs
Grouts & Anchors 27
Grouts
Cementitious Grouts
High flow, non-shrink, cementitious grout for gap thicknesses 10-100mm.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Conbextra HF
General purpose, non-shrink cementitious grout for gap thicknesses 10-75mm. Recommended applications at flowable consistency include stanchion base plates, bolt pockets and void filling. At trowellable consistency it is recommended for bedding load bearing components.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Conbextra GP
Non-shrink cementitious grout for underwater applications.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Conbextra UW
A ready to use, non-shrink construction grout for effective contact and support. It can be used from fluid to plastic consistencies for grouting of equipment and machinery, bearing pads, rails and anchoring.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Masterflow 765
A non-shrink, metallic reinforced grout for grouting and precision bearing operations where shrinkage must be eliminated to achieve full bedding and load transfer.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Masterflow 885
Non-shrink cementitious grout for thick section grouting of thicknesses 75-500mm. It is ideally suited to thick section grouting as it contains aggregates that reduce exothermic heat generation and risk of thermal cracking common with gap thicknesses in excess of 100mm.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Conbextra TS
Non-shrink cementitious bridge bearing grout. Used for grouting beneath bridge bearings, parapet posts, flanged lighting columns.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Conbextra BB
Expanding and plasticising grout admixture used with either neat cement or sand and cement mixes. It is incompatible with High Alumina Cement.Classification:• Flowable • End Use • Shrink • TemperatureSize: 0.227kg
Cebex 100
Grouts & Anchors28
A high strength pre-packed non-shrink cementitious grout. For grouting bolts, fittings, anchor bolts, machine beds, chain bolts, columns, bridge bearings, holes, cavities, etc. for gap sizes 10-75mm.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
A one-component, flowable, general purpose cementitious construction grout for gap sizes 10-100mm.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
A one-component, high strength, shrinkage compensated cementitious grout for gap sizes 10-100mm. Available in grey only.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Grout 212 Armorex Construction Grout
Armorex L2 High Flow
Based on specially selected Portland cements, graded aggregates and admixtures including a special form of carbon. This special formulation produces a grout that conforms to ASTM C827 Early Volume Change of Cementitious Mixtures. Does not contain iron, aluminium or other additives which eliminates any subsequent problems of dimensional instability, corrosion or staining. Designed primarily as a flowing grout but can also be used at a trowellable or dry pack consistency. It can be applied in thicknesses from 10-100mm.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Five Star Grout
A cementitious, non-shrink grout developed for applications where a cost efficient grout with high fluidity and adequate compressive strength is required. Designed primarily as a fluid grout but can also be used at a pourable or dry pack consistency.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
weber.cem Grout HF (High Flow)
A special performance, higher flow version of the standard grout. It can be applied in thicknesses from 10-50mm. It has superior properties and complies with HA Spec 2601.4 for use in bridge bearings.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Five Star Grout SP
Grouts & Anchors 29
Type Size Yield/CoverageFive Star Grout 25kg 14 litres at pourable consistencyFive Star Grout SP 25kg 14 litres at pourable consistencyweber.cem Grout HF 25kg 13 litres at pourable consistency
Weber Cementitious Grouts
Type Size Yield/CoverageConbextra GP 25kg Flowable: 13.25 litresConbextra HF 25kg Flowable: 13.25 litresConbextra BB 25kg Flowable: 13.5 litresConbextra TS 25kg Flowable: 12 litresConbextra UW 25kg Flowable: 14.5 litresCebex 100 227g 1-2 units per 50kg of cement
Fosroc Cementitious Grouts
Type Size Yield/CoverageSika Grout 212 25kg 14 litres at pourable consistencySika Armorex Construction Grout 25kg 14.2 litresSika Armorex L2 High Flow 25kg 13.5 litres
Sika Cementitious Grouts
Type Size Yield/CoverageMasterflow 765 25kg 13.4 litresMasterflow 885 25kg 12.6 litres
BASF Cementitious Grout
Conbextra EP10 is for grouting gap thicknesses from 0.25-10mm. It is an all-liquid system consisting of a base and hardener. Classification:• Flowable • End Use • Shrink • TemperatureSize: 1.5 Litres
Specially formulated from epoxy resin and graded aggregates producing materials with exceptional tough characteristics.Classification:• Flowable • End Use • Shrink • TemperatureSize: 25kg
Conbextra EP10 EP Pourable Grout
Epoxy Grouts
Grouts & Anchors30
Pumpable grade, 25 minute gel at 20°C.Used in overhead or horizontal holes where the hole is up to 25mm greater in diameter than the bar. The thixotropic nature of Lokfix P25 reduces flow of grout out of the hole.Classification:• Flowable • End Use • Shrink • TemperatureSize: 2.5 Litres
Conbextra EPR is for grouting gap thicknesses from 10-120mm and is a three-component system consisting of base resin, liquid hardener and specially graded inert fillers.Classification:• Flowable • End Use • Shrink • TemperatureSize: 8 Litres
Pourable grade, 25 minute gel at 20°C.For use where the hole is 8-40mm greater in diameter than the bar.Classification:• Flowable • End Use • Shrink • TemperatureSize: 2.5 Litres
Lokfix P25
Conbextra EPR Lokfix S25
Bar Grout Estimator
Guide for number of bolts with 2.5 litre pack based on hole depth 150mm.
Hole (mm) Bolt Sizes12mm 16mm 20mm 25mm
16 180 - - -20 80 150 - -25 30 40 60 -32 20 22 26 40
Pourable epoxy grout. Cures down to 5°C. Fast setting.Classification:• Flowable • End Use • Shrink • TemperatureSize: 15kg
A two-component polyester resin and special catalysed filler that has been developed for anchoring and fixing. The pourable grout is suited for pouring into holes for anchors in floors and slabs. weber.tec anchor grout rapid is available for cold weather working.Classification:• Flowable • End Use • Shrink • TemperatureSize: 2.5 Litres
Sikadur 42
weber.tec Anchor Grout
A two-component polyester grout for anchoring and fixing. Fast setting for rapid installation and can be used down to 0°C. Flowing grout to fill gaps of between 5mm up to 90mm dependent upon bulking out with coarse aggregate.Classification:• Flowable • End Use • Shrink • TemperatureSize: 23.3kg
Grout FG
Grouts & Anchors 31
Anchorfix-1 Epcon C8 Extreme
Anchorfix-2
AnchorFix-1 can be injected into most substrates including concrete, brickwork, blockwork, hollow and solid masonry, solid rock and natural stone and is suitable for practically every type of anchoring and fastening method, such as threaded rods, steel reinforcement, masonry wall ties and anchor sockets. Supplied in a single 300ml cartridge that fits into a standard sealant gun, the two-component styrene free polyester resin Sika AnchorFix-1 is mixed in the nozzle for simplicity and error free operation.Classification:• Flowable • End Use • Shrink • TemperatureSize: 300ml
The Epcon C8 Extreme performance epoxy resin has been specifically formulated for extreme rebar and stud applications. With virtually no smell Epcon C8 is easy to inject at low temperatures and is approved for use in wet and diamond drilled holes. This formulation resin has no unpleasant odour making it ideal for indoor applications.Substrates Suitable for concrete, plasterboard (with Satelis), hollow brick, stone, solid block, solid brick, hollow floor beams, hollow block wall (with Satelis). Nozzle & Injection tool available.Classification:• Flowable • End Use • Shrink • TemperatureSize: 450ml
A solvent and styrene free, epoxy acrylate based, two-part anchoring adhesive.Size: 300ml
Anchors
Chemical Fixings
Epcon High Performance Chemical Resin Epomax Vinylester Resin – Styrene Free
No shrink chemical anchor works underwater and has been used on major projects all over the world for over 15 years.Substrates Suitable for concrete, plasterboard (with Satelis), hollow brick, stone, solid block, solid brick, hollow floor beams, hollow block wall (with Satelis). Application nozzle with extension available.Classification:• Flowable • End Use • Shrink • TemperatureSizes: 200, 530ml
Easy to pump, performance resin. Fast curing vinylester resin, saving time and money on site. Now improved for a stronger fix, easier injection and faster curing time.Substrates Suitable for concrete, hollow brick, solid brick, solid brick stone, hollow floor beams, hollow block wall. Nozzle and injection tool available.Classification:• Flowable • End Use • Shrink • TemperatureSizes: 150, 380ml
Grouts & Anchors3232
Epobar Vinylester Resin C Mix Plus Polyester Resin – Styrene Free
High performance vinylester resin – Steel reinforcement chemical fixings for reinforced concrete.Substrates Suitable for reinforced concrete.Nozzle and injection tool available.Classification:• Flowable • End Use • Shrink • TemperatureSize: 410ml
Universal styrene free resin, C Mix Plus is a polyester resin dedicated for fixings into hollow materials. This product is styrene free and in an extended range of packaging options.Substrates Suitable for concrete, solid brick stone, solid brick, hollow block wall, hollow brick, hollow floor beams.Nozzle and injection tool available.Classification:• Flowable • End Use • Shrink • TemperatureSizes: 150, 300, 380ml
Fischer High Performance Steel Anchors
• Specification Advisory Service available
• Technical Support• On Site TestingThe FBN bolt is a flexible anchor for economical performance. Available in Grade 1.4401 (316) stainless steel and zinc plated steel.For fixing of: Brick support systems, metal constructions, formwork, brackets, beams, racking, machinery, etc.Installation instructions: Before tapping in, place the nut in the best position for installation. (Bolt projects approx. 2-3mm).Various sizes available
Steel Anchors
Fischer FSA Sleeve Anchors
Fischer FWB Wallbolts
FSA-S/FSA-B Light sleeve anchor for push-through installation. When the hexagon nut or bolt is tightened, the tapered bolt is pulled into the expansion sleeve and expands it against the hole wall.Sizes: diameter (mm)/usable length (mm) 8/15, 8/40, 8/65, 10/10, 10/35, 10/60, 12/10, 12/25, 12/50
The segmented steel expander shield is assembled ready for use with bolts or threaded rods of appropriate diameter.Various sizes available
Grouts & Anchors 33
Mild Steel Threaded Studding, Washers, Nuts & Connectors
Quality mild steel all-threaded studding for civil engineering construction use. Supplied with full range of nuts, washers and connectors. Suitable for use with SIG Construction Accessories chemical anchoring systems.Various sizes available
Fischer FH High Performance Anchors
FH-H/FH-B/FH-S Heavy-duty sleeve anchor for push-through installation. When the hexagon nut or screw is tightened, the cone is pulled into the expansion sleeve and expands tensioning it against the hole wall. A4 stainless steel version for outdoor use and in damp conditions (not part of the approval).
A broad range of female anchors for threaded rod, Spit drop-in anchors, including lipped anchors for a flush finish, not dependent on hole depth.
Female, internally threaded, hammer set anchor. Flush fix design is pre-set by inserting into the drilled hole and hammering the internal expansion cone inside the body of the anchor using a setting tool.Body steel stainless steel A4 X5 Cr Ni Mo 17-12-2, expansion cone stainless steel A4 X5 Cr Ni Mo 17-12-2.Various sizes available
Internally threaded, hammer set anchors. Flush fix design is pre-set by inserting into the drilled hole and hammering the internal expansion cone inside the body of the anchor using a setting tool.Body steel 5300 Pb NFA 35-561, expansion cone FB10 NFA 35-053.
Spit Grip Lip & Grip Drop-In Anchors
Spit Grip Lip & Grip Drop-In Anchors
Drop-In and Grip L
For fastening to concrete and other masonry materials, carbon steel self tapping anchors. Special Hi-Lo form and blue climaseal finish. Can be supplied complete with one ‘D’ end rotary percussion masonry drill bit.Various sizes available
Tapcon Masonry Anchors
Hex Head Tapcon AccessoriesType Box QtyTapcon Condrive Kit 1000 1Tapcon 6.5mm Drive Tru Socket 5mm Diameter Hex Head 1Tapcon 8mm Drive Tru Socket for 6mm Diameter Hex Head 1
Countersunk Head Tapcon AccessoriesType Box QtyP2 Phillips N° 2 Driver Bit 1P3 Phillips N° 3 Driver Bit 1
Accessories
Lightweight Anchors
34 Reinforcement & FormworkReinforcement and formwork accessories are core product ranges for SIG Construction Accessories.Our range is all encompassing, including site set-up equipment, spacers, formwork and all the specialist chemicals you need for your project.
Products Page
Reinforcement Mesh 35Cut and Bent Bar 37Wire Spacers 38Concrete Spacers 39Plastic Spacers 40Tying Wire 43Dowel Bars and Accessories 44Bolt Boxes and Accessories 45Beamform 46Tie Bar System 47Column Formers 48Metal Formwork 48Screed Rails and Accessories 49Crack Inducers and Void Formers 50Continuity Systems 51Reinforcing Bar Couplers 53Starter Bar Systems 54Shear Load Connectors 54Lockable Dowel Systems 55Balcony Connectors 56Cast-in Channels 57Floor Decking 58Formwork Chemicals 58Concrete Curing, Hardening and Sealing 59Brick and Concrete Cleaning Material 61
Reinforcement & Formwork 35
Reinforcement MeshReinforcement Mesh
Eco-MeshBS References
Mesh size nominal pitch of wires
Wire Sizes Cross sectional area per metre width
Overhang Nominal weight per m2
Sheets per tonne (approx)
Sheet weight Sheets per bundle
Sq metres per tonne
Main Cross Main Cross Main CrossA393 200mm 200mm 10mm 10mm 393mm 393mm 200mm 5.783 15.01 66.62 20 172A252 200mm 200mm 8mm 8mm 252mm 252mm 200mm 3.703 23.44 42.66 30 270A193 200mm 200mm 7mm 7mm 193mm 193mm 200mm 2.831 30.66 32.61 40 353A142 200mm 200mm 6mm 6mm 142mm 142mm 200mm 2.082 41.7 23.98 50 480
ALTIMESH Exclusive to
ALTIMESH is economical and lighter to handle when compared to standard fabric. It maintains the specific weight per m² in the sheet, excluding the lap zone. • ALTIMESH has 200mm edge overhang, as opposed to Standard A fabrics with a 100mm edge overhang, • ALTIMESH has 1 less longitudinal wire and 1 less
crosswire• Reduced weight per sheet compared to Standard Fabric• Less prone to damage compared to flying end fabric
Reinforcement & Formwork36
Standard Sizes (4.8 x 2.4m)BS References
Mesh size nominal pitch of wires
Wire Sizes Cross sectional area per metre width
Nominal weight per m2
Sheets per tonne (approx)
Sheet weight
Sheets per bundle
Sq metres per tonne
Main Cross Main Cross Main CrossA393 200mm 200mm 10mm 10mm 393mm 393mm 6.16kg 15 70.96kg 20 162.34A252 200mm 200mm 8mm 8mm 252mm 252mm 3.95kg 22 45.50kg 30 253.16A193 200mm 200mm 7mm 7mm 193mm 193mm 3.02kg 29 34.79kg 40 331.13A142 200mm 200mm 6mm 6mm 142mm 142mm 2.22kg 40 25.57kg 50 450.45A98 200mm 200mm 5mm 5mm 98mm 98mm 1.54kg 57 17.74kg 60 649.35B1131 100mm 200mm 12mm 8mm 1131mm 252mm 10.90kg 8 125.57kg 10 91.74B785 100mm 200mm 10mm 8mm 785mm 252mm 8.14kg 11 93.57kg 14 122.85B503 100mm 200mm 8mm 8mm 503mm 252mm 5.93kg 15 68.31kg 20 168.63B385 100mm 200mm 7mm 7mm 385mm 193mm 4.53kg 20 52.19kg 30 220.75B283 100mm 200mm 6mm 7mm 283mm 193mm 3.73kg 24 42.97kg 40 268.10B196 100mm 200mm 5mm 7mm 196mm 193mm 3.05kg 29 35.14kg 50 327.87C785 100mm 400mm 10mm 6mm 785mm 70.8mm 6.72kg 13 77.41kg 20 148.81C636 100mm 400mm 9mm 6mm 636mm 70.8mm 5.55kg 16 63.94kg 20 180.18C503 100mm 400mm 8mm 5mm 503mm 49.0mm 4.34kg 20 50.00kg 30 230.41C385 100mm 400mm 7mm 5mm 385mm 49.0mm 3.41kg 26 39.28kg 40 293.26C283 100mm 400mm 6mm 6mm 283mm 49.0mm 2.61kg 34 30.07kg 50 383.14D49 100mm 100mm 2.5mm 2.5mm 49.1mm 49.1mm 0.77kg 113 8.87kg 50 1298.7A393 200mm 200mm 10mm 10mm 393mm 393mm 6.16kg 23 44.35kg 20 162.34A252 200mm 200mm 8mm 8mm 252mm 252mm 3.95kg 35 28.44kg 30 253.16A193 200mm 200mm 7mm 7mm 193mm 193mm 3.02kg 46 21.74kg 40 331.13A142 200mm 200mm 6mm 6mm 142mm 142mm 2.22kg 63 15.98kg 50 450.45
Bespoke sizes available
Standard Fabric Mesh
Reinforcement & Formwork 37
Shape/Code Shape/Code Shape/Code
00 A
01 A*27
A + B + (C) - 0.5r - d
47
2A + B + 2C + 1.5r - 3d
11
A + B - 0.5 - d
28
A + B + (C) - 0.5r - d
51
2(A + B + C)) - 2.5r - 5d
12
A + (B) - 0.43R - 1.2d A + B + (C) - r - 2d
29
A + B + C + (D) + 2(E) - 2.5r - 5d
56
A + 0.57B + (C) - 1.6d
13
A + B + C + (D) - 1.5r - 3d
31
2A + 3B + 2(C) - 3r - 6d
63
A + (C) - 4d
14
A + B + C + (D) - 1.5r - 3d
32
A + B + C +2D + E + (F) - 3r - 6d
64
A + (C)
15
2A + 1.7B + 2C - 4d
33
A
67
A + B + (C) - r -2d
21
A + B + C + (E) - 0.5r - d
34
π (A-d) + B
75
A + B + C + (D) - 1.5r - 3d
22
A + B + C + (E) - 0.5r - d
35
Cπ (A-d) Where B is greater than A/5 this equation no longer applies in which case the following formula may be used:L = C(( π(A d))2 + B2) 0.5
77
A + B + (C) - r - 2d
23
A + B + C + (D) - r - 2d
36
A + 2B + C + (D) - 2r - 4d
98
A + B + (C)
24
A + B + C + D + (E) - 2r - 4d
41All other shapes where standard shapes cannot be used.
No other shape code number, form of designation or abbreviation shall be used in scheduling.
A dimensioned sketch shall be drawn over the dimension columns A to E. Every dimension shall be specified and the dimension that is to allow for permissible deviations shall be indicated in parenthesis, otherwise the fabricator is free to choose which dimension shall allow for tolerance
99A + B + (E)
25
A + B + C + D (E) - 2r - 4d
44
A + B + (C)
26
A + 2B + C + (E)
46
* Stock bars are supplied in 12 metre notional lengths in diameters of 12mm and above in original manufacturers bundles.
Tolerances for stock lengths shall be subject to BS4449:2005
Bar Dimensions/WeightsNominal Size 40mm 32mm 25mm 20mm 16mm 12mm 10mm 8mmCross-sectional Area 1256.6mm 804.2mm 490.0mm 314.2mm 201.1mm 113.1mm 78.5mm 50.3mmMass 9.864kg/m 6.313kg/m 3.854kg/m 2.466kg/m 1.579kg/m 0.888kg/m 0.616kg/m 0.395kg/m
Reinforcement MeshCut and Bent Bar
Cut and Bend Service
Cut and Bend Service
We aim for a very fast turn around of small jobs. A same day service is often available locally and depending on the specifics of the bar schedule, it is sometimes possible to palletise the cut and bent bar and send on a next day service throughout the country.
Generally schedules totalling 2 tonne or less will be considered for in-house processing. Above 2 tonne is usually outsourced.
Bending Dimensions – Preferred Shapes Reinforcing bar to BS 4449:2005, produced to Engineer’s schedules.
Reinforcement & Formwork38
Length Heights Available2m 50mm to 400mm
Height50, 60, 75, 90, 105, 120, 135, 150, 165, 180, 200mm
Reinforcement MeshWire Spacers
ALTISPACER Exclusive to
Height50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200mm
ALTISPACER is a welded snake wire spacer for supporting reinforcement of fabric, which is stronger than normal hychair and circular spacers, making it extremely reliable and safe on site. ALTISPACER requires no tying so is extremely quick to set up on site.• Easy to handle • No tying on site required • Designed for strength • Stronger than normal methods • More economical
Hychairs A Type Spacer Circular Wire Spacers
A welded girder for supporting reinforcement or fabric without damaging the polythene membrane. Hychairs are also ideal for dowel bar support.
Formed into a 1m diameter circle. 4/5 hoops per standard full size sheet of mesh are normally sufficient.Pack Size: 20m, 100m
Reinforcement & Formwork 39
Sizes Length40, 50, 75mm 1m
Reinforcement MeshConcrete Spacers
ALTIBAR Exclusive to
Triangular bars manufactured to high quality, with a new shape.• Ensured cover, independent of direction of placing • Fibre concrete, therefore perfect bond to in-situ
concrete - dimensional accuracy ALTIBAR triangular bars are standard 40N, however 50N or 60N can be produced on request.
Square Bar
A heavy duty bar for supporting steel on bridge decking and other areas where high point loads can be expected.
Sizes Length25mm to 100mm 1m
Flat Based (Double Cover)
Flat Based Double Cover Concrete Spacers. Suitable for heavy duty horizontal applications.
Denominations Pack Size40/50 20060/70, 65/70 50
Reinforcement & Formwork40
Arched Based (Double Cover) Arched Based (Triple Cover)
For minimum contact with formwork. Ideal for vertical reinforcement.
For minimum contact with formwork. Ideal for vertical reinforcement.
Denominations Pack Size20/25/30 50035/40/50 200
Denominations Pack Size30/40 25040/50 20050/60 12565/70 50
All bars 40N as standard, 50N and 60N Available upon request
Plastic Spacers
Sizes Available Bar Diameter20mm to 75mm 4 – 12/12 – 20
Wheel Spacers – Standard Duty
A comprehensive range of clip-on plastic wheel spacers suitable for all pre-cast and site applications.
Plastic Wheel Spacer – Heavy Duty
Heavy duty plastic ring spacer with stiffening legs which add stability to the product. Ideal for bottom reinforcement in both on-site and precast applications. Design of the bottom feet ensures minimal contact with the formwork.Various sizes available
Reinforcement & Formwork 41
ALTITRAC Exclusive to
Height Length Pack Size15mm 2000mm 100 20mm 2000mm 100 25mm 2000mm 100 30mm 2000mm 100 35mm 2000mm 80 40mm 2000mm 80 45mm 2000mm 8050mm 2000mm 80 55mm 2000mm 82 60mm 2000mm 8265mm 2000mm 82
Plastic Spacers, more commonly known as TricTrac, is traditionally used for supporting bottom reinforcement in suspended slabs. ALTITRAC is a versatile spacer with high load-bearing capacity. It is a light, easy and continuous stable support for mesh and reinforcement. Due to its unique design it does not easily overturn or break when stood on and allows excellent free flow of concrete.Key Benefits• Due to its unique shape, ability to store more product
on a pallet, reducing number of pallets required on site• More robust than standard tric trac shape to withstand
site conditions and handling• More economical• Ensures minimal contact with the concrete surface• Allows free flow of concrete
Length Sizes Available2m 25mm to 70mm
Tric Trac Spacer
A versatile plastic spacer that can be used on both horizontal and vertical surfaces.
Grade Plate Spacers – Support Fix
Double cover spacer that has been designed for use in ground floor slabs, where its large base area prevents puncturing of polyethylene membrane. Often used with ground beam shuttering.Various sizes available
Reinforcement & Formwork42
Support Clip – Light Duty Support Clip – Heavy Duty
General purpose clip on spacer used in all types of applications found in precast yards and on site. It can be fixed horizontally or vertically on bars from 4mm to 12mm diameter.Various sizes available
Heavy Duty Support clip for both vertical and horizontal application. Suitable for bar size from 8mm to 25mm.Various sizes available
Plastic Tower Spacers Plastic Shims
Bar End Cap Spacers Plastic Pile Cage Spacers
Robust and designed for vertical and horizontal applications. Excellent stability and concrete flow with large clamping area and pointed feet to ensure minimum visibility on the struck concrete face.Various sizes available Hard plastic shims for non-structural, temporary
alignment of precast concrete panels and components. Size 70 x 70mm.
Provide cover to the formwork and prevent staining to the precast units.Various sizes available
Specially designed spacers for use in pile cages. Wheel spacers can be threaded onto helicals before cage is inserted. Clip on spacers can be fitted onto helicals or main bars.Various sizes available
Thickness Available2mm to 10mm
Reinforcement & Formwork 43
Reinforcement MeshTying Wire
ALTIWIRE Exclusive to
ALTIWIRE is a black annealed wire used for manual tying of pieces or iron reinforcement in construction.• Lighter to handle• 10kg Roll
Tying wire dispensing reel system used by Steel Fixers when tying reinforcement in concrete structures. The system comprises of a dispensing reel which houses a 2kg spool of tying wire. System Components: • 2kg (224m 18 gauge) grade 304 stainless steel refill
spool• 2kg (120m 16 gauge) black annealed refill spool• Refillable Tying Wire Dispensing Reel• Reelfix Branded Heavy Duty Leather Belt
Material Diameter Metres per 2kg
kg per 1000m
Approx. gauge
Stainless 304/316 1.2mm 224 8.93 18Black Annealed 1.6mm 120 16.66 16
Tying Wire
Double Loop Wire Ties
Different gauges can be supplied if required. Tie puller tool provided.
Stainless Steel Coil.Gauge: 1.2mm
Lengths Available100mm to 250mm
Rapid System – Tying Wire and Dispensing System
Reinforcement & Formwork44
A rigid tube 100mm length with 25mm of compressible filler, designed as a tight fit over dowel bars in expansion joint. If combining both sleeves and caps, use next size up for the cap. Length: 100mm
A bitumen based material for painting on to dowel bars and de-bonding contraction joints in slab construction.
Stainless Steel Dowel Bars
Epoxy/Polymeric Coated Dowels
Dowel Bar Sleeves
Expansion Dowel Caps
De-bonding Compound
Supplied sawn cut to order to your specific lengths. Grades available are 304 & 316.
Dowel bars can be supplied with either a partial or full coating to your specific requirements.All coatings comply with DOT specification.
A flexible PVC sleeve to DOT specification. Compressible foam plugs available for use in expansion joints.Available Diameters Available Lengths12mm to 32mm 200mm to 450mm
Available Diameters Pack Size12mm to 32mm 100
Available Sizes5 and 25 litre
Available Diameters8mm to 40mm
Dowel Bars and Accessories
Dowel Bar Cradles are used to support dowel bars in contraction and expansion joints.Contraction Joints Wire Ties. De-Bond/Epoxy coated. Plastic Sleeve.
Expansion Joints Dowel Cap. Wire Ties. De-Bond/Epoxy coated Plastic Sleeve.
h = height from base to underside of dowel bar.
h = height from base to underside of dowel bar.
Plain round bars supplied with either cropped or sawn ends.
Dowel Bar Cradles
Mild Steel Dowel Bars
Available Diameters Available Lengths12mm to 25mm 400mm to 900mm Wire Ties H
Plastic Sleeve De-Bond/Epoxy coated
Contraction Joint
Dowel Cap
Wire Ties H
De-Bond/Epoxy coated
Expansion JointRange of individual rectangular plate dowels, housed in innovative, high strength plastic sleeves. These dowels can be used where arris protection is not required or as part of a site-assembled system with the patented MultiJoint top profile if a steel joint edge is required.
Individual Plate Dowels
Reinforcement & Formwork 45
A full range of holding down bolts are available.Available in Galvanised and Stainless Steel and can be made to bespoke sizes at request.Standard Lengths: 20, 24mmStandard Diameters: 375, 450, 600mm
A waxed cardboard cone which can be cut away when no longer required.Various lengths available
Designed to maximize holding down bolt movement while ensuring there is no induced stress or failure and no damage to the bolt head or threading. It provides a simple, easy to install, safe and cost effective solution and also eliminates manual handling risks, noise, vibration and chemical contact. The Bolt Cracker clips on to the head of the bolt and tightens up.
Available Diameters: 75mm, 100mmAvailable Lengths: 150mm to 500mm
An economical and easy method of ensuring bolt location in structural steel stanchions. Polystyrene cones can easily be dissolved when their application is complete.Various sizes available
Cleaning Solvent for Resin based products. Resoklens is a specially formulated solvent for cleaning resin products from tools and equipment before the resin has hardened, and for removing any residual release agent from formwork.Available Sizes: 5, 20, 25, 205 litres and IBC’s
Holding Down Bolts Cardboard Bolt Boxes
Expanded Metal Bolt Boxes
The Bolt Cracker Polystyrene Bolt Boxes
Adomast Resoklens
Bolt Boxes and Accessories
Reinforcement & Formwork46
Reinforcement MeshBeamform
ALTIFORM Exclusive to
Beamform is a fast and simple system for constructing in-situ concrete ground beams and pile caps. Durable polypropylene sheets.Various sizes available Bespoke sizes available
Beamform
ALTIFORM is a compact beamform sheet which maintains the strength of traditional formwork and other proprietary systems but without the bulk. The reduced size means that cutting and wastage on site is minimal. Manufactured from heavy-duty polypropylene, ALTIFORM is an economical method of constructing in-situ concrete ground beams and pile caps.• Offers protection against ground movement• Reduced size means less cutting and waste on site• Lighter and easier to handle• More economical
Size2 x 4m length
Reinforcement & Formwork 47
Tie Bar System
Joint nuts are used to join the rods complete with centre stop to ensure equal spacing inside the connector. The shorter hexnut is available for use where access is restricted.
A quick release 15mm tie system. The bar is supplied in 6m lengths. Bespoke sizes available
A stainless steel anchor for casting into concrete, complete with nailing plate for fixing to formwork.
For securing single-sided shuttering to rock or concrete walls. Drill hole of 36.5 to 38mm diameter to the following depths:• Min 20cm in concrete• Min 2.0m in rock more than 200kg/cm2
• Min 2.5m in rock more than 150kg/cm2
• Min 3.0m in rock more than 100kg/cm2
Conduct tensile tests before applying final load.
A knock-on wing nut used in conjunction with waler plates for securing the bar in formwork applications. Can also be supplied for 20mm and 26mm tie bars.
Connection Nuts
15mm Thru-Tie Bar Cast-In Anchor
Rock AnchorWing Nuts & Waler Plates
Inside Diameter Outside Diameter Bag Qty20mm 24mm 10022mm 26mm 10026mm 30mm 5032mm 38mm 50
Thruty sleeve is a rigid PVC tube of 2mm wall thickness, supplied in 2 metre lengths which can easily be cut to the required size. It is used as an expendable sleeve over tie bolts, facilitating their removal and also acting as a spacer to ensure correct width of wall.
Thruty cones are used at the ends of the thruty sleeve and can be easily extracted after removal of the formwork, to form a chamfered recess for subsequent grouting.Available Diameters: 20mm to 32mm
For the filling of tie-holes formed by formwork bolts. The addition of clean water gives a rapid setting, yet durable high strength mortar and is ideally suited for the filling of voids particularly in new construction which need to be rapidly put into service, such as tie-holes, grout-holes and voids around fixings.
Used with plastic sleeve/tube to form a watertight seal. For tube internal diameters 20-32mm.Available Diameters: 20mm to 32mmThruty Sleeve
Thruty Cones
Tiefill
Adoplug
Plastic Stoppers
Wall Tie Filler and Sealing Compound. Adoplug is a polymer modified, fibre reinforced, cementitious powder designed specifically for plugging tie holes. When mixed with water it forms a cohesive, easy to apply, shrinkage compensated compound and cures to develop a strongly bonded watertight plug to form an effective seal.Available Sizes: 8, 25 kg Coverage: 2 kg will fill approximately 1m² by 1mm deep
Reinforcement & Formwork48
Light-weight, easy to set and strip, even in the wet. Convenient, cost effective and versatile, it can be cut, drilled or scored and is available in a variety of types and sizes to meet different forming needs.Various sizes available Bespoke sizes available
Square or rectangular concrete column formers minimise labour costs and the hassles associated with site-built, plastic and metal forms.
This tube has a resin-coated liner, which is completely seam free and provides the ultimate in concrete surface finish and appearance.
Fixing collars have become the proven method for supporting circular column formers in position whilst casting and are reusable. Should only be supported in normal use at the base and top (they should not be supported in the middle).
Hy-rib expanded metal sheet product, specifically developed for use as permanent formwork to concrete, primarily used in construction joint applications but it is also used to form wall, beam & column surfaces and slabs soffits, where the formed surface will not be seen.
Circular Concrete Column Formers
Square or Rectangular Concrete Column Formers
Seamless Circular Concrete Column Formers
Fixing Collars
Permanent Formwork
Column Formers
Metal Formwork
Zinc Coated Hy-Rib - Type: (BS EN 10327) DX51D + Z275Grade Length Width Thickness Weight Sheet Identification
2811 2, 3, 4, 5m 89, 178, 267, 356, 445mm 0.4mm 3.39kg/m2 ID Colour: Red 2811
2611 2, 3, 4, 5m 89, 178, 267, 356, 445mm 0.5mm 4.23kg/m2 ID Colour: Green 2611
2411 2, 3, 4, 5m 89, 178, 267, 356, 445mm 0.75mm 6.34kg/m2 ID Colour: Yellow 2411
Stainless Steel Hy-Rib - Type: (BS EN 10088-1) 1.4301Grade Length Width Thickness Weight Sheet Identification
2811 S 304 2, 4, 5m 89, 178, 267, 356, 445mm 0.4mm 3.4kg/m2 ID Colour: Blue 2811 S 304
Reinforcement & Formwork 49
Screed Rails and Accessories
Size Slab ThicknessK35 50 – 100mmK85 100 – 140mmK135 150 – 225mm
Made from recycled materials, lightweight, durable and does not require removal after placement of concrete. It is easily cut to length on site and has pre-drilled holes in the vertical face for placing steel dowel bars and in the base for anchoring. Includes built in expansion joint, endclips for joining and a removable top string for joint sealing.Top Strip Angle Joints Top Strip Angle Joints integrate seamlessly with K-FORM K85 and K135 Screed Rails.
The unique design with its 1.5mm top profile of galvanised steel provides a very straight and fully controlled hairline crack. The profile of this rail along with the holes in the metal strip tie the rail firmly to the slab.
Used when screeding to provide greater accuracy in concreting levels.
An easily adjustable system for use with a 50mm diameter pole. Minimum slab depth 100m
A heavy duty steel screed chair system that is designed for slabs up to 405mm deep, comprising a rigid three legged base with threaded shaft into which a saddle is screwed to adjust the height. Available for various slab depths from 115mm to 405mmSizes 115mm - 405mm available
K-FORM Screed Rails
Metal Top Screed Rail
Screed Bars
Plastic Screed Chairs
Steel Screed Chairs
Available Heights Available Length65, 90, 115, 140, 165mm 3.9m
Reinforcement & Formwork50
Crack Inducers and Void Formers
A re-useable rigid aluminium T-bar to form a straight void to accept top crack inducers.Supplied in 5m lengths
A range of rigid PVC strips of 2.5m length for nailing to column shutters or formwork. Supplied as either plain or with a nailing flange. Supplied in 100m bundles.Available Sizes: 10 x 10mm to 30 x 30mm
A re-usable PVC void former for forming grooves in concrete or nailing to formwork.
A 40mm deep by 5mm wide expanded polyethylene foam joint filler.1 and 5 litre contact adhesives availableAvailable in 30m standard and self-adhesive Coils
A two part top crack inducer and joint former. The top section should be removed after concrete has cured, leaving a sealant void of 25mm x 10mm. We recommend the use of the aluminium T-bar when using this product.Supplied in 5m lengths
A base crack inducer used to induce a crack from the base vertically. Used in conjunction with top crack inducers or saw cutting.
Aluminium T-BarCorner Fillets
PVC Void Former
Side Slab Seal
Top Crack Inducer Two Part
Base Crack Inducer
Length Depth5m 40 and 75mm
Length Width Height3m 10m 20m3m 20m 20m3m 12m 20m3m 25m 20m
Reinforcement & Formwork 51
Type H Hook (Standard in
80mm box)
Type RU U Bar (Not available
in 80mm box)
Type U U Bar/DH Double Hook
(Not available in 80mm box)
Type S Straight Bar
Type S2 Double Straight Bar
Type SH Angle with leg in horizontal plane
Type RA Angle
Type RA1 Double Angle
Type RA2 Double Angle
Type RA3 Double Angle
Type CS Closed Stirrup
Type 2H Two Single Hooks
used for boxes wider than 240mm
Standard Range SpecificationsEazistrip Reinforcement Continuity Systems are designed to maintain continuity of reinforcement at construction joints in concrete. Formwork design is simplified and there is no need to drill shuttering. Each unit consists of a galvanised steel casing which is dimpled to provide an effective concrete bond. Pre-bent bars are housed within the box and are secured by a protective cover. When the cover is removed the bars can be straightened ready for lapping onto the main reinforcement. Bars must be straightened only once, using an Eazistrip re-bending tool. When the potential for water ingress through the construction joint is a major concern, Eazistrip can be supplied with a Pentaflex hydrostatic seal which provides protection against moisture permeation along the joint face.Eazistrip Reinforcement Continuity systems are manufactured from CARES approved bar. The grade of reinforcing bar complies with the tensile requirements of BS4449:2005 Grade B500C. The bars are bent in accordance with BS8666.Notes1. Dimensions shown are nominal. Heights and lengths
may typically vary by one bar diameter.2. On 16mm diameter Type U boxes, the stirrup may be
achieved by using two shape code 21 bars. These are referenced DH.
3. Boxes containing 16mm bars are nominally 50mm deep.
4. Maximum box length is 3m dependent upon weight.Bespoke sizes available
Eazistrip Continuity System
Continuity Systems
Reinforcement & Formwork52
Ancon KSN Anchors are designed for use with 12, 16 and 20mm diameter reinforcing bar, threaded with an Ancon Bartec thread.
There are eight standard anchors in the range.
Bartec Continuation Bars
KSN Anchors
Alternative to traditional continuity/pull out bar systems and can be used in situations where a traditional/pull out bar casing would be too heavy, large or expensive to be practical.
Hyten Continuity Rack
Ancon KSN Anchors, in combination with Bartec parallel-threaded reinforcing bars, simplify concrete construction joints. They provide continuity of reinforcement at slab-to-wall joints without the restrictions on bar length and bar diameter of re-bend continuity systems.
Ancon KSN Anchor Continuity System
KSN Anchors are supplied fixed to a timber carrier at the designed spacing. The timber simplifies installation, creates a shear key when removed and increases anchor embedment.
KSN Tapered Thread Timber Anchor Carrier
Reinforcement & Formwork 53
Reinforcing Bar Couplers
The MBT range of couplers provides a cost-effective method of joining reinforcing bars. ET series couplers are used to connect reinforcing bars of the same size. They can be used when neither bar can be rotated and are available in sizes 10mm to 40mm.Various sizes available
The MBT Continuity coupler allows reinforcement to be extended at construction joints in concrete without the need to drill or otherwise damage the formwork at the construction joint locations. They are available to suit bar sizes 12mm to 40mm.Various sizes available
MBT Headed Anchors are designed to provide dead end embedment for bars in concrete. This helps to reduce congestion and simplify the placement of rebars by removing the need for hooked ends. The anchor comprises half an MBT coupler with a plate welded to one end which carries the full tension load of the bar when it is bearing against the concrete. The MBT Headed Anchor also has the added advantage of requiring no special bar end preparation.Various sizes available
MBT Transition couplers connect reinforcing bars of different diameters and are suitable for applications when neither bar can be rotated. They are available to suit bar sizes 12mm to 40mm.Various sizes available
MBT ET Series
MBT Continuity Series MBT Headed Anchors
MBT Transition Series
Reinforcement & Formwork54
Starter Bar Systems
The Ancon Tapered Thread Starter Bar System provides continuity of reinforcement at construction joints. The female component comprises a bar, normally threaded at one end only, supplied fixed to an Ancon tapered thread coupler. Various bar shapes are available.Various sizes available
The male section comprises a straight bar, threaded at one end to allow connection to an Ancon tapered thread coupler.Various sizes available
Starter Bar
Continuation Bar
HT Couplers
Nailing plates and torque wrenches are also available.
HT Range consists of standard, positional, mechanical and connecting couplers.Various sizes available
Shear Load Connectors
The DSD is the original two-part, double dowel, shear load connector. The dowel component can move longitudinally within the sleeve to accommodate movement. Various sizes available
The ESDQ shear load connector uses the same dowel as the ESD, but the cylindrical sleeve is contained within a rectangular box section to allow lateral movement in addition to longitudinal movement. Various sizes available
DSD ESDQ
Reinforcement & Formwork 55
The DSDQ shear load connector uses the same dowel component as the DSD, but the cylindrical sleeve is contained within a rectangular box section to allow lateral movement in addition to the longitudinal movement. Various sizes available
This single dowel shear connector is available in four sizes with each size available in two lengths. ESD shear connectors are used where the slab or wall is too thin for DSD, and where loads are small. Various sizes available
DSDQ ESD
A lockable dowel for slab-to-wall joints. The dowel compartment is manufactured from 30mm diameter Duplex stainless steel. One end of the dowel is designed to fix into the stainless steel Ancon SKS24 Threaded Anchor cast into the face of the concrete, and the other end features a series of grooves to accept the locking plate.
Lockable Dowel Systems
The original lockable dowel for slab-to-slab joints. It allows for initial movement to take place and then, after a predetermined period (generally 60-120 days) is locked with a two part epoxy resin poured into the L-shaped grout box.
A heavy duty lockable dowel for slab-to-slab joints. It has a design capacity of up to 136kN.
Ancon ESDQ-L20
Ancon HLDQ-L30
Ancon ESDQ-L20W
Reinforcement & Formwork56
Balcony Connectors
A high performance thermal break system for concrete-to-concrete applications. It comprises 100% stainless steel reinforcement which offers maximum corrosion resistance and low thermal conductivity. Each unit is manufactured as a non-deformable cage offering high rigidity and dimensional stability.Concrete-to-Concrete
The Ancon lsolan V system is used for the transfer of shear forces in simply supported balconies.Concrete-to-Concrete
Ancon Isotec V System
A simple, cost-effective thermal break system. Conventional reinforcing bars are used to provide the tension and compression reinforcement which offer cost savings over other systems and simplifies specification, scheduling, transportation, handling and installation.Concrete-to-Concrete
Ancon lsolan
The Ancon lsolan MV system is used for the transfer of moment and shear forces in cantilevered balconies.Concrete-to-Concrete
MV System
Used to anchor steel balconies into structural concrete slabs. They feature an integral thermoset plate at the interface between the bracket and slab to minimise cold bridging. Two-part construction allows phased installation to suit site schedule.Steel-to-Concrete
Ancon STC Connectors
Used to fix steel balconies to structural steel frames. Two thermoset plates provide a thermal break at each steel interface to minimise cold bridging. Vertical fixing centres vary to accommodate steel section heights.Steel-to-Steel
Ancon STS Connectors
Load bearing thermal insulation element for cantilever balconies. The element transfers bending moment stress and shear forces. The integrated hanging and perimeter tensile reinforcement, fitted as standard, saves the unnecessary and costly use of extra stirrups or hooped mat.
Type K for concrete to concrete
Enables the thermal insulation of steel constructions to concrete slab.
Type KS for concrete to steel
Reinforcement & Formwork 57
HT Shear Kit is a simple and cost effective means of providing punching reinforcement. Stud diameters range from 8mm to 32mm to suit any slab thickness.
Hy-Ten Shear Rail
Punching Sheer Reinforcement Kit
Ancon Shearfix is used within a slab to provide additional reinforcement around a column head or base. Shearfix rails are manufactured from strips of steel, 16mm wide. The quantity of studs and rails, their dimensions and spacings, and the layout pattern around the column is determined by calculation.Steel-to-Concrete
Shearfix
Cast-in Channels
Ancon 30/20 is a high performance channel and should be used in preference to 38/17. Its unique shape allows the applied load to be fed directly from the channel lips to the anchors and the more compact section size improves its fit between reinforcement. In addition, its lower material content provides cost benefits.Specially designed T-head bolts ride up the sloping sides of the channel and securely lock behind the front lips. This channel also accepts standard 20mm wide wall ties.
Self-anchoring channel for use with Ancon wall ties referenced SP21, SD21 or PP21. The shallow depth of 18mm allows the channel to be used where there is reduced cover to the reinforcement. Nail holes aid the fixing of the channel to timber formwork.
30/20 Omega 21/18
Inserted into the channel and turned through 90°. The bolt must then be tightened to the correct torque. Tapped plate washers can be used as an alternative to ‘T’ bolts where non-standard bolt lengths or diameters are required.
Types of Suitable Fixings:• Single Expansion Bolts (Concrete)• High Performance Bolts (Concrete)• Ancon Steel Grip (Steel Box Section)• Resin Anchors (Concrete)
Fixing to Channels
Support Fixings
High performance bolt
Capsule anchors
Reinforcement & Formwork58
Floor Decking
Developed for use with the permanant metal deck shuttering of steel framed structures.It is supplied in standard three metre lengths in a variety of heights to suit the floor thickness. Corner assemblies and special units are available to suit particular applications.
CombiDeck
Formwork Chemicals
Formwork Patch Repair Compound A rapid curing, stainable, two-part unsaturated polyester resin based wood filler designed to give superior performance and longevity. This non-sag, repair filler is ideal for larger repairs to damaged or rot affected timber and is particularly suitable for structural overhead repairs when suitable plastic shuttering is used. It is easy to model and shape upon initial setting. Specifically developed to enable repairs to be carried out within one hour.Usage: 1m2 per 2kgSizes: 1.4kg, 6kg (other sizes available on request)Colours: White, Dark Oak, Black.
Concrete Mould Oil (BCA Category 5) High quality mould oil for general site and precast yard use that achieves a top quality concrete finish in most situations. Release is achieved by the oil forming a physical barrier between the formwork surface and the concrete. Surfactants help to eliminate blowholes and provide a clean, uniformed and non-stained surface.Usage: 30-40m2
Sizes: 5, 20, 25, 205 LitresColour: Colour Free
Adofill Adostrike
(BCA Category 2)A high quality non-staining release mould oil for use on all types of shuttering and formwork. It incorporates active ingredients which allows forms to remain in place longer than traditional Mould Oils. Usage: 15-30m2 per litreSizes: 5, 25, 210 LitresColour: Struck Concrete
Water Based Surface Retarder for Application to Concrete Top Face Aqueous solution of penetrating and retarding agents.Usage: 30-40m2
Sizes: 5, 20, 25, 205 LitresColour: Light Brown
Adostrip Safetard Liquid
Reinforcement & Formwork 59
Water Based Surface Retarder for Application to Formwork A gel type composition, colour tinted to assist application. Formulated to retard the set of fresh concrete that comes into contact with it. It is ideally suited to the production of exposed aggregate finishes or ‘keyed’ surfaces for construction joints or for subsequent application of plasters or renders.Usage: 3-4m2 per litreSizes: 5, 25 LitresColour: Transparent
Plastic Formwork Coating A low viscosity, high solids, single pack moisture curing polyurethane which, being of lower vapour pressure than most similar materials, is an easier material for operatives to use. Includes wetting agents to provide maximum adhesion. Can be used with all types of timber formwork and other porous and semi-porous types of materials used for concrete forming.Usage: 7-9m2 per litreSizes: 1, 5, 25 LitresColour: Translucent
Safetard Gel Adoseal
Chemical release agent (BCA Category 2) Release agent for general site use to achieve easy formwork release and first class concrete finish but also maintains a high degree of formwork cleanliness. It is a blend of reactive oils in a partially evaporative rapid drying hydrocarbon carrier. The carrier dries to form a positive barrier coating on the form face. Usage: 30-40m2 per litreSizes: 5, 20, 25, 205 LitresColour: Transparent Amber
Environmentally Friendly Formwork Release Agent Developed using the latest water soluble polymer technology to produce an environmentally friendly and highly efficient release material for concrete formwork on site. Ready to use and particularly suited to outdoor use on faced sealed plywood, steel moulds and other impervious formwork materials.Usage: 30-40m2 per litreSizes: 5, 20, 25, 205 LitresColour: White
Adolease Safelease
Concrete Curing, Hardening and Sealing
Water Based, Medium Efficiency Concrete Curing Compound Spray-on temporary membrane to retain moisture in freshly placed concrete. It is formulated to prevent evaporation of the gauging water and provides an economical and efficient method for curing concrete.Usage: 4-6m2 per litreSizes: 5, 20, 25, 205 LitresColour: Clear
Significantly improves the properties of the floor to render dustproof, oil and grease proof, case hardened, resistant to dilute acids, more durable, longer lasting and easier to clean.Usage: 8m2 per litreSizes: 5, 20, 25, 205 LitresColour: Cloudy Colour Free
Safecure Standard Adotuf Concrete Surface Hardener and Dustproofer
Reinforcement & Formwork60
Water Based, High Efficiency Concrete Curing Compound Spray-on temporary membrane to retain moisture in freshly placed concrete. It is formulated to prevent evaporation of the gauging water and provides an economical and efficient method for curing concrete.Usage: 4-6m2 per litreSizes: 5, 20, 25, 205 LitresColour: Clear
A clear acrylic polymer resin solution primarily for application to surfaces of freshly laid concrete where it has a double function. The first to form a highly effective curing membrane that conforms to ASTM. C309, and the second is to act as an in-depth sealer for the hardened concrete, rendering its surface dustproof and extremely hard wearing. Its secondary function and benefits are also applicable when the material is applied to existing concrete surfaces.Usage: 6m2 per litreSizes: 5, 20, 25, 210 LitresColour: Transparent Amber
Safecure Super Adocure Sealer
Suitable for or general site and precast yard use. It achieves a top quality concrete finish in most situations and with the majority of formwork mould surfaces – including metal, plywood, polymeric and MDO. Release is achieved by the formation of a physical barrier between the formwork surface and the concrete.Usage: 30-40m2
Sizes: 5, 20, 25, 205, 1000 Litres Colour: Transparent Pale Yellow
Available in PF grade for Power Floated floors.Usage: 6m2 per litreSizes: 5, 20, 25, 210 LitresColour: Transparent Amber
Fugitive dye is added to Adocure WW to aid visual identification of areas of application.Usage: 4-6m2
Sizes: 5, 20, 25, 210 Litres Colour: Cloudy Pale Blue
An aqueous silicate solution, designed to deposit a layer of firmly bonded, high cohesive strength, minute crystals within the top surface of the concrete to form an integral membrane.This in turn, will fill all surface pores and capillaries to reduce moisture evaporation.Usage: 5.5m2 per litreSizes: 5, 20, 25, 210 LitresColour: White
Safestrike Adocure Sealer PF
Adocure WWT Adocure WW
Reinforcement & Formwork 61
Resin based curing compound of 75% efficiency. This is a solution of inert resins in evaporative solvents for use in general construction projects.Usage: 4-6m2
Sizes: 5, 20, 25, 210 Litres Colour: Transparent Amber
Resin based curing compound of 90% efficiency. Complies with Clause 1027 of the Department of Transport’s specification for Highway Works, similar to Adocure Standard but with a higher curing efficiency. WBS listed for drinking water projects.Usage: 4-6m2
Sizes: 5, 20, 25, 210 Litres Colour: Transparent Amber
Adocure Standard Adocure Super
Aluminised for use in strong sunlight conditions and where DTp stipulate aluminised for highways, bridges, runways, etc. Usage: 4-6m2
Sizes: 5, 20, 25, 210 Litres Colour: Silver/Grey
Adocure Super AL
Removes heavy deposits of rust, scale, cement, concrete and mineral deposits from most hard surfaces. Contains Hydrochloric acid and can be used neat up to 1:20 dilution depending on application. Sizes: 5, 25 Litres
Water rinsable degreaser. Solvent action removes oil, grease, tar, bitumen and waxes when used neat. Sizes: 5, 25 Litres
A non-caustic, high performance degreaser for the effective removal of heavy deposits of oils, greases and other stubborn stains. An effective alternative to hazardous solvent and caustic cleaners. Dilution rate 1:10 to 1:40 depending on application.Sizes: 5, 25 Litres
Brick Cleaner
Jizer
Janitol Plus
Brick and Concrete Cleaning Material
Waterproofing 6262 WaterproofingThere are many forms of sheet membranes and liquids used to protect structures from water ingress. We pride ourselves on stocking a full range from the important manufacturers in this sector. We have been stocking these products for many years and are well placed to give advice on all the systems.Our range includes:• Pre-applied membranes• Post-applied membranes• Bentonite carpets• Bentonite/HDPE combinations• Geotextile/HDPE combinations• Cavity forming membranes• Liquid Applied MembranesPlus all the ancillaries to go with the systems including protection boards, sealing tapes, detailing accessories and where required primers.
Products Page
MembranesPre-applied Membranes 63 Post-applied Membranes 64Bentonite Membrane 66Cavity Systems 67Liquid Applied 69Waterstops Swellable 71Non Swellable 72PVC Water Bar/Systems 72Cementitious Water Plug 74Flexible Cementitous 75Standard Cementitous 76Internal Render/Plaster 78Accessories Membranes Accessories 79Tapes & Mesh 80Bentonite Powder & Granule 81Protection Boards 82Primers 83Ad Mixture 84Water Stop Accessories 85Sealants and Adhesives 86 Pre-Fabricated Intersection 87
Limelite®
Waterproofing 63
Membranes
SikaProof A (05, 08, 12)
Proofex Engage
Pre and cold applied sheet waterproofing membrane system for application below base slabs, on single and double-faced formwork cast walls.SikaProof A consists of an embossed, highly flexible polyolefin membrane, with a unique grid pattern of sealant and a specially designed non-woven fleece.
Proofex Engage is a pre-applied waterproofing membrane which mechanically bonds to poured concrete, remaining in place if settlement of substrate occurs.Roll Area: 38.10m2
Preprufe®/Preprufe® Plus
Pre Applied Membrane
Preprufe® 160 Flex
Preprufe® Plus waterproof membranes are composite sheets comprising a robust HPDE backing, a pressure sensitive adhesive and a trafficable weather resistant coating with dual adhesive dual laps for added security.
Heavy duty, high performance membrane, flexible HDPE geomembrane. The membrane has a textured face on one side designed to aid adhesion to cast concrete. Roll Area: 73m2
Pre-applied flexible waterproof membrane that develops an adhesive bond to poured concrete. It composes of a robust flexible backing, a pressure sensitive adhesive and a trafficable weather resistant coating.Roll Area: 42m2
Preprufe 160R/ Preprufe 160R Plusfor use under slabs less than 350mm thick and vertical application. Roll Area: 160R = 42m2
300R = 36m2
Type Thickness Roll Size Roll Weights160R 0.8mm 1.2 x 35m 42kg300R 1.2mm 1.2 x 30m 50kg
Pre-applied Membranes
Waterproofing64
A high performance self adhesive membrane for resisting methane, radon and CO2, and preventing water entering buildings. Provides a vapour and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.Roll Area: 20m2
Proofex 3000MR
A high performance self-adhesive membrane for a range of waterproofing applications including basements and substructures. Proofex 3000 provides a vapour and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.Roll Area: 20m2
Proofex 3000
For basements and substructures. Externally applied waterproofing membrane for CO2 and radon gas protection. Suitable for application to damp surfaces and green concrete.Suitable for dry surface applications only.Roll Area: 20m2
Bituthene® 4000
For use below screeds as a vapour barrier. Suitable for dry surface applications only. Roll Area: 25m2
Self-adhesive Preprufe membrane for basement walls in open excavations. Cold-applied, self-adhesive waterproofing membrane, composed of a reinforced cross-laminated HDPE film, and a synthetic non-bituminous adhesive. Roll Area: 42m2
A superior performance externally applied waterproofing membrane for basements and substructures. 70m hydrostatic pressure resistance with ultra low moisture transmission rate. Methane, CO2 and radon gas protection. Suitable for application to damp surfaces and green concrete.Roll Area: 20m2
Methane, CO2, and Radon resistant grade of Bituthene. Suitable for dry surface applications BS8485 2015.Roll Area: 20m2
Bituthene® 2000
Preprufe® 800PA
Bituthene® 8000
Bituthene® MRX
For basements and substructures. Externally applied waterproofing membrane for CO2, and radon gas protection. Suitable for dry surface applications only.Roll Area: 25m2
Bituthene® GP
Bridge deck waterproofing membrane. It is a hot-applied pour and roll sheet system for use on podiums, hard standings and local authority bridges.Size: 25l
Famguard GS100
Post-applied Membranes
Waterproofing 65
First post-applied, fully bonded, easy-to-install waterproofing membrane, based on SikaProof® technology.
Roll Area: 20m2
SikaProof P
Cold applied, self adhesive bitumen sheet waterproofing membrane. Ideal for areas where large unobstructed areas are to be waterproofed.Roll Area: 20m2
Sheetseal 226
A high performance, torch applied tanking membrane, ideally suited for tanking in cold and damp conditions. Excellent lap adhesion and security is achieved by torch application.Roll Area: 10m2
Tanking Membrane – 3100
It has a tough, non-woven polyester fibre facing, which eliminates the need for a separate protection board when externally tanking. Excellent lap adhesion and security is achieved by torch application.Roll Area: 10m2
Tanking Membrane – 3100HD
A multi-purpose, self-adhesive damp proof and tanking membrane.Roll Area: 20m2
Tanking Membrane – 1000SA
A tougher, more durable self-adhesive damp proof and tanking membrane.Roll Area: 15m2
Tanking Membrane – 2000SA
For ancillary products please see Membrane Accessories on page 79.
Waterproofing66
BentoShield® MAX LM
Sika BentoShield® MAX LM is a fully-bonded, self-healing waterproofing system. It is a polymer-modified natural sodium bentonite, needle-punched membrane with integrated PE flexible laminate. The sealing technology
of Sika BentoShield® MAX LM combines the unique swelling performance of sodium bentonite with high-strength polypropylene geotextiles.
Proofex Hydromat is a bentonite waterproofing membrane with unique surface bentonite impregnation for impermeable lap joints.Roll Area: 36.3m2
To ensure watertight continuity during detailing work and for sealing around awkward geometrical shapes, it may be necessary to cover an area with loose natural sodium bentonite powder.Size: 25kg
Proofex Hydromat
Hydromat
Structureseal is waterproofing composite of high swelling Sodium Bentonite encapsulated between a non-woven and woven geotextile. When confined under pressure within a structure the swelling is controlled, forming a dense, monolithic, impervious waterproofing membrane.
Structureseal Waterproofing Membranes
Bentonite Membranes
Exclusive to
Waterproofing 67
Used for drained cavities vertically in lower risk applications.Size: 2.4m x 20m
Hydroduct CF08
Creep resistant drainage sheets are prefabricated geocomposites comprising studded polystyrene drainage cores covered with polypropylene filter fabric. They provide cost effective alternatives to traditional aggregate drainage.
Hydroduct® Vertical Drainage Sheets
A highly efficient, cost effective drained cavity former. When installed against the internal face of concrete floors and walls Hydroduct CF will provide a continuous drainage path that must link with the site internal drainage system.
Hydroduct CF
Polypropylene spun bonded filter fabric on one face of a 11mm studded drainage core. Applied to walls of basements that have been waterproofed with Bituthene membranes and protected with Bituthene Protection Boards.Size: 1.25m x 32m
Hydroduct® 200
Polypropylene spun bonded filter fabric on one face of a 11mm studded drainage core with a bonded plastic film on the other. Applied to walls of basements that have been waterproofed with Bituthene membranes. Also applied to existing basement walls and permanent shuttering prior to the application of Preprufe membranes.Size: 1.25m x 32m
Hydroduct® 220
Polypropylene non-woven filter fabric encapsulating a 25mm studded drainage core. Installed at the bottom of basement walls and linked to the Hydroduct drainage sheet.
Hydroduct® Coil 150
Forming drained cavities horizontally and vertically.Size: 2m x 20m
Hydroduct CF20
For all Grace Hydroduct® range you will also need: Cut fasteners (jointing), Bitutstick™ 4000 (jointing), Hydroduct Tape, Coil End Outlet, Coil Straight Connector, Coil Tee Connector, Protection Board.
Cavity Systems
Waterproofing68
Cavity Drain is an internal tanking drainage system used to collect water entering the basements and sub-structures and channel it to a sump or collection point for disposal. P20 is used mainly on floors but can also be used for walls. P5 is used only for walls.
RIW Cavity Drain
Double Drain is an impermeable high density polyethylene profiled sheet incorporating a permeable geotextile filter fabric designed to prevent ground water reaching a structure and to protect and enhance the performance of the waterproof membranes.
Double Drain
Plaster Drain is an internal drainage system manufactured from clear high density polyethylene with 5mm undercut studs in a dovetail shape which forms the key for plaster and render finishes in above and below ground situations.
Plaster Drain
Type Roll SizeCavity Drain P5 2.07 x 20mCavity Drain P20 2 x 20m
Walldrain consists of a cuspated lightweight plastic core bonded to a geotextile fibre filter. The fibre will permit free entry of water, but not soil, and so prevent soil particles from clogging drainage systems. Walldrain is designed to be placed with the geotextile filter layer facing the direction of the water seepage or backfill.Size: 1m x 50m
Walldrain
Slabdrain is a cavity drain former manufactured from a dimpled HDPE, designed to provide a drainage channel beneath the concrete in floor and wall construction. The former is provided with self adhesive edges to enable joints to be sealed to give a water and gas tight membrane.Size: 1m x 50m
Slabdrain
Sika® Drain-850 Geo is a heavy duty drainage and protection sheet produced from high density polyethylene (HDPE) with dimples 10 mm high and a filtration layer of geotextile (PP) bonded on the top.Size: 2.44m x 12.5m
Sika® Drain-850 Geo
This provides a continuous water and damp proof drainage former to connect with drainage channels or outlets cast into floor slabs. These drainage channels or outlets connect with the site drainage system to provide a high level of waterproofing security.Two types of Cavity Drain:Cavitydrain 80 (Vertical application only) Size: 2m x 30mCavitydrain 200 (Vertical and horizontal application) Size: 2m x 20m
Proofex Cavity Drain
A geocomposite HDPE drainage sheet with thermobonded polypropylene filter.Roll Area: 40, 25m2
Roll Thickness: 8, 10mm
Proofex Sheetdrain
Waterproofing 69
Bitumen rubber/latex compound designed for use in waterproofing applications. Suitable for uses such as waterproof membrane to retaining walls, as a vapour barrier to panels and repairing fine cracks in asphalt surfaces.Sizes: 5, 25, 200 Litre
Two-component bituminous liquid membrane for waterproofing of underground structures and intricate details in conjunction with Proofex waterproofing systems.Size: 28kg
Liquid Applied
Mulseal DP
Proofex LM
Two-component elastomeric, cold applied liquid detailing compound. For use with Grace waterproofing membranes where liquid applied waterproofing is necessary to ensure watertight continuity.Size: 5.7 Litre
An easy to apply, high performance cold applied liquid damp proof membrane which rapidly dries to form a flexible membrane.
Two part system specially formulated for waterproofing below ground structures in various applications such as waterproofing blockwork internally and externally, fillets and detailing irregular profiles and pipe penetrations. Size: 20kg
A low modulus structural concrete expansion joint sealant. CreteSeal cures by reaction with atmospheric humidity to produce a joint sealant with a 50% joint movement accommodation factor.Size: 600ml (24/Box)
Bituthene® LM
Visqueen Shield
Visqueen Axiom Guard
Visqueen Axiom UniSeal
Visqueen Axiom CreteSeal
For Visqueen Liquid Gas Membrane please see Groundwork Engineering page 23.
A unique single component polyurethane liquid waterproofing membrane incorporating an accelerator that upon contact with humidity cures rapidly to give a continuous fully bonded waterproofing coating. Size: 15kg
A high performance, brush applied damp proofing emulsion containing synthetic rubber latex which provides a waterproof and vapour resistant, black elastomeric membrane. When suitably protected, Synthaprufe will be effective through the life of the building.Sizes: 5, 25 Litres
Synthaprufe Original
Waterproofing70
Two colour, seamless and fully bonded liquid applied waterproof coating based on polyurethane technology.
Liquid Asphaltic Composition is typically used as a damp proof membrane to ground floors, as a vapour barrier behind cladding and for tanking of basements.
Used to provide a water and water vapour proof barrier, or to give protection against abrasion, fresh and salt water, carbon dioxide, alkalis and dilute mineral acids. It is resistant to U.V light and atmospheric attack.
Used to provide a protective coating to concrete or steel superstructures or other structures such as retaining walls, plinths, etc.
Flexiseal
LAC
Toughseal
Heviseal
Hydrocoat is an easily applied, high-build black bitumen paint, which dries to a water and water vapour proof finish. It may be easily applied to most building substrates.
Hydrocoat
A high performance waterproofing liquid used as a damp proof membrane and water-repellent coating, prior to the erection of masonry. It forms a flexible membrane when cured and provides an effective barrier to water and water vapour.Sizes: 5, 25 Litres
Synthaprufe LAC High performance liquid damp proof membrane
For ancillary products please see Waterproofing Accessories on page 79.
Waterproofing 71
Supercast SW10 and SW20 are hydrophilic waterstops for use in water retaining and water excluding structures. The SW10/20 waterstops are fixed into place using either Supercast SW adhesive or SWX hydrophilic adhesive. Supercast SWX can also be used as a problem solving hydrophilic waterstop in difficult access areas and detailing.SW10 Size: 5mm x 20mm x 15mSW20 Size: 10mm x 20mm x 15m
Supercast SW10 and SW20
A conformable, swellable polymer/butyl rubber waterstop strip for construction joints that expands in contact with water. When fully encapsulated by poured concrete, the expansive forces form a seal against concrete faces. The seal resists hydrostatic pressure, stopping water from entering sub-structures. You will also need: • Adcor 500S • Adcor Mastic • Adcor Adhesive MS • Adcor 500S Mesh Profile • Large Secura ClipsSizes: 25mm x 20mm x 5m
Adcor® 500S
A sodium bentonite based material, designed to stop water infiltration through in-situ concrete construction joints. Sodium bentonite swells when in contact with water, forming an impermeable barrier. This swelling property allows the Waterstop to form a permanent pressure seal within the concrete joint, thus eliminating water migration over or along the waterstop.
Waterstop
Type SizeRIW Waterstop 25m x 19mm, supplied in 5m long coilsRIW Mesh A box of 50, 600mm lengths including fixing
nails 30 linear metres per box
A compound of polychloroprene (Neoprene) and hydrophilic resin, which expands when in contact with water, providing a self-sealing and easy to use alternative to traditional methods. Ideal for water retaining structures to achieve watertight insitu concrete joints.
You will also need: • Contact Adhesive • Super Glue • Leakmaster Cartridge
Hydrotite
Three joint sealing profiles that swell in contact with water. They are permanently water resistant, highly elastic and pretreated to prevent premature swelling on site.Sikaswell A 2005 Size: 20mm x 5mm x 20mSikaswell A 2010 Size: 20mm x 5mm x 10mSikaswell S-2 Size: 600ml
SikaSwell
Waterstops
Swellable
Waterproofing72
Type SizeSupercast Butyl-Nek 12mm x 60mm x 6mSupercast Butyl-Nek 25mm x 40mm x 4mSupercast Butyl-Nek Primer 5 litres
A rubber/bitumen pre-formed flexible sealing strip specifically used to provide a permanent watertight joint for pre-cast units which are jointed together on site.
Supercast Butyl-Nek
A unique non-swelling, pre-formed plastic adhesive waterstop that bonds fast to cured concrete surfaces and fuses with fresh concrete. It provides watertight integrity for construction joints in concrete structures in places where swellable waterstops are not best suited.Size: 25mm x 25mm x 5m
Supercast Synkoflex
PVC Waterstop profiles are designed for the use in basement, foundation and floor slab construction in both horizontal and vertical joints.External Expansion Incorporates a flat top centre box.External Construction Plain web section for use in contraction and construction joints.Centrebulb For use in expansion or contraction joints. Reinforced eyeleted outer flanges.Dumbell Plain web sections for use in construction and contraction joints, also incorporating eyeleted outer flanges.H.D. Centrebulb Range 10mm thick plain web sections for use in construction and contraction joints, also incorporating eyeleted outer flanges.Jointing Pieces A full range of junction pieces are available. Vert L Flat L Vert T Flat T Flat X Mixed Flat XTools Jig and Knife Jointing Jig 110V Hot Knife
PVC Internal and External Profiles
Non Swellable
PVC Water Bars/Systems
Waterproofing 73
An externally cast passive PVC waterstop system manufactured in a range of sizes for the protection of expansion, construction and contraction joints in reinforced concrete basements and substructures.Size: 7.5, 10m
Specially developed for water excluding and retaining structures such as basements, reservoirs or sewage treatment works. The AT System is an important advance in concrete joint protection that combines ‘active technology’ with the conventional mechanical properties of internally or externally placed PVC waterstops.Size: 7.5m
Serviseal AT System
A PVC waterstop incorporating two hydrophilic elements for use in water excluding and water retaining structures. The hydrophilic elements provide extra security over standard PVC profiles.
Supercast TwinstopType Section Width
Roll Weight
Roll Length
Supercast Hydrofoil 150mm 21.3kg 15mSupercast Hydrofoil 200mm 27.3kg 15mSupercast Hydrofoil 250mm 27.1kg 12mSupercast Rearguard S 200mm 24kg 12mSupercast Rearguard S 250mm 33.4kg 12mSupercast XHD Hydrofoil 250mm 42.9kg 10mOther sizes available on request
Supercast Hydrofoil PVC waterstops are suitable for use in water retaining structures. When positioned centrally within the thickness of the concrete components they prevent the loss of water from within the structure and the ingress of ground water.
Supercast Hydrofoil
Rearguard PVC waterstops are designed for use in vertical and horizontal joints in both water retaining and water excluding structures.
Supercast PVC Waterstops
A specially formulated PVC, internally cast, heavy duty waterstop system manufactured in a range of sizes and grades for use in reinforced concrete structures. Servitite is cast into the centre of the concrete member where it provides resistance against high hydrostatic pressure from both faces.
Servitite
PVC Edgetie is an internally cast passive waterstop system manufactured in a range of sizes for sealing joints in concrete structures subject to water pressure. Centrally placed.
PVC Edgetie
Waterproofing74
Flexible Soft PVC-Waterbars to seal construction and expansion joints in concrete structures. Sika Waterbars® are available in dierent sizes and types, depending on their use.
Sika PVC Waterbar
Increased web thickness gives a much stiffer section. The stiffened profile is used where large volumes of concrete are being placed. They are used where concrete is being placed from a great height such as deep wall shutters.
XHD Hydrofoil
250mm
17
30
Ancillaries available to suit all types of PVC Waterstop: Jointing Jigs, 110V knife, 220V knife and Theater Blades.
Cementitious
Thora Waterplug is a blend of hydraulic cements, well graded sands and chemical additives supplied in a dry powder form. It requires only the addition of clean water to produce a ready to use, ultra-rapid setting plugging mortar.Sizes: 5, 25kg
Masterseal 590
A rapid setting Water Stop which, when mixed with clean water, provides a ready to use ultra rapid setting durable plugging compound for active water leaks in concrete and masonry. The material expands as it cures to form a watertight seal with similar characteristics to concrete. Use on holes, joints and cracks. Sets both above and below the water level.Size: 5kg
FebTank Plug
A rapid setting mortar which is easy to apply to horizontal, vertical or overhead surfaces at a wide range of thicknesses. There are two grades available: Renderoc Plug 1 with an initial set time of approximately one minute, and Renderoc Plug 20 with an initial set time of approximately 20 minutes. Renderoc Plug 1 Size: 6kgRenderoc Plug 20 Size: 25kg
Renderoc Plug WP
Grey powders composed out of cement, selected silicas and modifiers. When mixed with clean water Aquatek Plug & Aquatek Plug XF provide rapid setting plugging mortars.Aquatek Plug has a final setting time of three minutes, Aquatec Plug XF of thirty seconds. Can be applied even under water.Size: 10kg
Aquatek Plug
Water Plugs
Waterproofing 75
A cementitious ready-mixed and rapid setting compound to plug leaks and stop water. DWI approved for use in contact with drinking water.Size: 15kg
Vandex Plug
A safe and simple to use ultra-rapid setting mortar for arresting water seepage and infiltration under pressure through cracks, joints and voids in concrete and masonry prior to the application of cementitious coatings and mortars.
Fastfill WP
Type Size (kg) CoverageFastfill WP 8 4.2 litres per 8kg
Cementfill WP is a single component, polymer modified, fibre reinforced, Portland cement based plugging and sealing compound. When mixed with water it exhibits unique hydraulic properties to produce a rapid setting mortar.
Cementfill WP
Thoro Acryl 60 is an acrylic polymer liquid additive for cement mixes, designed to enhance their physical characteristics, ease application and increase wear and weather resistance.Size: 20kg
Thoro Acryl 60
A two-component coating containing cement, selected silicas, fibres, modifiers and a water-based acrylic liquid which cures into a flexible, waterproof coating which allows a movement up to 0.6mm and up to 1.2mm if reinforced with Reinforcement Mesh. Available in White or Grey
Aquatek Elastic 2C
A 2mm coating which cures to form a hard, highly alkaline film with a degree of flexibility. This versatile coating produces a complete barrier to chlorides and has a ranqe of uses including potable water (DWI Approved), basements, tunnels and other underground structures. BBA certified.Size: 30kg
Cementitious Coating 851
Elastomeric grade of waterproof coating for the treatment of cracked or crazed surfaces.Size: 30kg
Cemprotec Elastic
Flexible Cementitious
Waterproofing76
Cementflex is a two-component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry.
Cementflex
Cementjoint is an advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape.
Cementjoint
A one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. Fine fillers, selected graded aggregates, plus special waterproofing additives produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain. Suitable for application by brush or trowel.Size: 20kg
SikaLastic 1K
A Grey waterproofing powder product composed of Portland cement, selected silicas, chemically reactive ingredients and modifiers. When broadcasted onto the surface, Aquatek Super XA reacts with the moisture in the concrete and forms a waterproofing barrier through reaction of the active chemicals with the free-lime, to form long chained insoluble crystalline complexes which block the capillaries and micro-fissures in the concrete, stopping water penetration even under negative water pressure.Size: 25kg
Aquatek Super XA
When mixed with clean water, forms an extremely durable waterproof coating for concrete and masonry which is easily applied by a stiff hand brush, broom or spray. Ideal permanent waterproofing system for basements, cellars, pools, reservoirs and below ground level applications. Resists both negative and positive water pressure. Available in Grey or White.Sizes: 20, 25kg
FebTank Super
When mixed with water or a Thoro Acryl 60/water blend (one part Thoro Acryl 60 to three parts water) to a lump free consistency, provides a waterproof coating that is easily applied by brush or spray to concrete and masonry above and below ground level.Size: 25kg
Masterseal 581
When mixed with clean water Thoroseal Super forms an extremely durable waterproof coating for concrete and masonry. Applied with a brush or spray. Available in white and grey and in bags or pails. Resists both positive and negative pressure.Size: 25kg
Masterseal 583
Standard Cementitious
Waterproofing 77
A cement-based Grey powder containing selected silicas, fibres and modifiers. When mixed with clean water Omnitek RM Fiber provides a rapid setting, polymer modified, waterproof repair mortar.Size: 25kg
Omnitek RM Fiber
Epoxy modified waterproof coating for enhancing the chemical resistance of concrete, blockwork and brickwork. Ideally suited for dirty water applications.Size: 15, 30kg
Cemprotec E-942
Available as a standard 2mm product or a 3-6mm variable formulation for the waterproofing of floor and deck areas. Overcomes the risk of osmotic blistering on damp substrates.
Size: 30kg
Cemprotec E-Floor
A flexible cementitious coating, used for waterproofing water retaining structures and water excluding structures. It provides a flexible waterproof coating suitable for use in potable water tanks, reservoirs, canals and culverts. The material can be used on concrete, brick and blockwork substrates. Includes powder component in white or grey and liquid polymer component
Size: 23.2kg (for both parts)
Nitocote CM210
SikaTop Seal 107 is a two-component polymer modified cementitious waterproof mortar comprising of a liquid polymer and a special cement based mix incorporating admixtures.Size: 25kg (for both parts)
SikaTop Seal 107
SikaTop 121 is a two-component thin layer waterproofing, levelling and bonding mortar.Size: 25kg (for both parts)
SikaTop 121
A one-component flexible polymer modified cementitious damp proof product comprising of special cement based components and admixtures. When used with water a slurry or mortar material is produced for direct application to a variety of construction substrates, available in Grey and White.Size: 25kg
Sika Damp Proofing Slurry
Cementfill FC is a single-component, thixotropic, polymer modified, cement based, waterproof fairing coat and repair mortar for concrete and masonry.
Cementfill FC
Cementfill HB is a single-component, thixotropic, polymer modified, cement based, waterproof, rapid hardening, high-build repair mortar for concrete and masonry.
Cementfill HB
Cementseal is a two-component, polymer modified, cement based, waterproof coating for concrete and masonry.
Cementseal
Waterproofing78
Sika 1 Pre-Batched Mortars are blends of specially graded aggregates, sand and cements manufactured to the correct mixing ratio, given below.The four graded bags (Spritz, Render, Finish, and Screeding) make up the Sika 1 Pre Bagged Tanking system.Size: 25kg
Sika 1 Pre Batched Mortars
A capillary-active cement-based waterproofing slurry specifically designed for concrete waterproofing applications. It is based on grey Portland cement and is applied to concrete to provide in-depth waterproofing protection.Size: 25kg
A cementitious two-component polymer modified and efflorescence-free surface waterproofer with hydrophobic properties, resistant to water and moisture. Made of Vandex BB 75 as a dry component and Vandex Elasticizer PK 75 as a liquid component, which provides elasticity and crack bridging properties.
Size: 25kg
Vandex Super / Super White
Vandex BB 75 E
Vandex BB 75 is a cementitious, ready-for-use ( just add water), efflorescence-free surface waterproofer with hydrophobic properties, resistant to water and moisture.BBA approved (certificate no. 90/2516) and approved for use in contact with drinking water.Size: 25kg
Vandex BB 75
Ideal for plastering on a range of substrates during renovation work and specifically following the installation of a new damp-proof course or system.Size: 25kg
Limelite Renovating Plaster Limelite®
A hard durable finishing plaster specifically designed to complement Limelite Backing Plasters.Size: 25kg
Limelite High Impact Finishing Plaster Limelite®
Internal Render/Plaster
Waterproofing 79
A plastic plug for fixing membrane to structure.
Accessories
An angled foam polyethylene fillet for use at floor and wall joints.
Waterproof pipe entry consisting of polyethylene/polypropylene membrane, which includes an aluminium foil paper.
Proofex Angle Fillet
Proofex Top Hat
Also see Fosroc Proofex LM and Grace Bituthene LM on page 69.
A high-density profiled polyethylene sheet which protects the top edge of the RIW Double Drain and prevents clogging.
A fixing plug for vertical fixing of the Cavity Drain.
A fixing aid for locating and mechanically securing the system to the substrate.
RIW Top Edging Strip
RIW Brick Plugs
RIW X Cramps
RIW Plaster Drain Plugs
The channel outlet consists of a 90° PVC bend and a PVC male coupling which is fitted to the base of the ‘Aqua channel’ to allow water to be taken from the channel to the water collection point, i.e. sump and pump.
Channel Outlet
The channel which is pre-formed in a pentagonal shape with pre-drilled 19mm drainage holes set 70mm apart along its length, is fitted around the periphery of an internal floor at the vulnerable wall/floor junction and can be used in most waterproofing situations.
Aqua Channel Range
Membranes Accessories
Where gravity fed drainage is to be used, the channel end outlet has been designed to convert the pentagonal shape of the Aqua channel into a round aperture.
Cleaning ports ( jetting eyes) should be incorporated into the Aqua Channel and can be inserted at any point along its length, to allow for periodic cleaning of the drainage system.
Channel End Outlet Cleaning Ports
Waterproofing80
40mm hardened nail with 30mm premounted washer for securing the RIW Structurseal to concrete by hand nailing or shot firing.Size: Box of 500
A manual stapler and staples (box of 2500) for fixing sheets of Structurseal together at laps, etc.
Washers
Staple Gun
An expanding, reinjectable hose for producing waterproof construction joints.
Sika lnjectoflex
Used to adhere Proofex Top Hats to Proofex Engage and as a closure strip to Proofex “L” section.Size: 2m x 50m
Total Tape
A reinforced, double sided waterproof adhesive tape for sealing and jointing roll ends, cut edges and corner pieces. It consists of a strong synthetic fibre fabric impregnated and coated both sides with a butyl adhesive which is protected by a removable siliconised paper.Size: 200mm x 10m
Engage Detail Strip
A reinforcing mesh used in conjunction with Proofex LM for areas of extreme loading (cavings, edges and pipe penetrations).
Size: 100mm x 50m
Proofex LM Mesh
For sealing overlaps at Preprufe roll ends and cut ends.Size: 100mm x 15m
Preprufe® Tape LT
Butyl rubber tape, with a non-woven polypropylene surface, for sealing over joints in the membrane.
RIW Plaster Drain Overtape
A self-adhesive rope for sealing between individual sheets and around services, fixings, etc.
RIW Sealing Rope
Tapes & Mesh
Waterproofing 81
A self-adhesive tape to seal joints between the RIW Wall/Floor Junction and membrane.
RIW Sealing Tape
A pre-formed corner piece for assisting in sealing around corners and services.
RIW Wall/Floor Junction
A double-sided tape for adhering the RIW Wall/Floor Junction.
RIW Adhesive Tape
Granules are chemically treated sodium bentonite granules, which are used as a detailing accessory product, with the RIW Structureseal system. When hydrated and in containment, the Granules form into a dense, impermeable material, that combines with the sodium bentonite in Structureseal to form a seamless waterproof membrane.
Granules
To ensure watertight continuity during detailing work and for sealing around awkward geometrical shapes, it may be necessary to cover an area with loose natural sodium bentonite powder.Size: 25kg
Hydromat Powder
A high swelling sodium bentonite in granular form which reacts when in contact with water and forms an impervious gel.Size: 22.7kg
Dual Seal Granules
Bentonite Powder, Granules and Accessories
Sealing Compound is a trowel-grade, sodium bentonite/butyl-rubber based sealant, designed for a variety of surface preparation and waterproofing detail work, for use with the RIW Structureseal system. Being a bentonite based material, Sealing Compound swells upon contact with water to seal against water intrusion. With the consistency of thick grease, Sealing Compound is easy to apply and bonds to most materials.Size: 14.25 Litres
Sealing Compound
Waterproofing82
Bituthene® Protection Boards and Tapes
A 50mm wide, single sided butyl tape for sealing the laps, penetrations and other details.The Termination Strip is a 12mm x 10m galvanised steel bonding strip used to fix the top edge of Sika Bentoshield® MAX LM waterproofing membrane on wall sections.Size: 50mm x 25m
A trowel grade sodium bentonite compound used especially as a detailing mastic around penetrations and corner transitions. After applying on details, Sika BentoShield® MAX LM can be installed without a waiting period.Size: 15 Litres
Chemically treated sodium bentonite granules especially placed in overlap zones and critical areas for additional sealing. When hydrated, it reinforces the overlap areas by forming an impermeable and seamless layer.Size: 25kg
The Sika recommended fixing system is a fast, secure and safe method for securing Sika BentoShield® Max LM. 38mm extra hard steel nails and 36mm impact resistant washers are fixed with the licence-free gas fixing tool.
SS50 Tape
Sika Bentoshield Paste
Sika Bentoshield Granules
Sika Fixing System
Type Size Thickness Proofex Protection Board 2 x 1m 3mm
Proofex Protection Board
Type SizeBituthene Protection Board 3mm x 0.9 x 2.03mServipak Protection Board 3, 6, 12mm x 1m x 1.5mBitustik™ 4000 (adhere board to Bituthene) 150mm x 12m rollsBitutape™ 4000 (tape for over laps) 70mm x 20m rolls
Robust, non-degradable bitumen boards to provide protection to Bituthene membranes against backfill.
Protection Boards
Waterproofing 83
Type Dimension Thickness Colour
Twinshield Standard 1.22 x 2.44m 2mm Black/Translucent
Twinshield Standard 1.22 x 2.44m 3mm, 4mm TranslucentTwinshield Standard 1.22 x 2.44m 5mm BlackTwinshield Standard 1.22 door size 2mm BlackTwinshield FR 1.22 x 2.44m 3mm, 4mm TranslucentTwinshield FR 1.22 door size 2mm Translucent
Manufactured from twin wall polypropylene board that is tough, durable, impact and chemical resistant, non-toxic and waterproof. TwinShield does not stain and is suitable for all round protection. Available in flame retardant
Twinshield
Type Thickness Sheet SizeBD2POL 2mm 1.22 x 2.44mBD8POL 8mm 1.225 x 2.5mBD2/CLEAR 2mm 1.0 x 2.0m
Polypropylene protection board of corrugated structure easily cut, curved or creased on corrugations. Tough and durable. 2.0mm and 8.0mm thick.
Polypropylene Protection Board
Size1 x 2m
Size2020 x 900mm
A tough, flexible bitumen impregnated board used for the protection of waterproof membranes against mechanical damage, pedestrian or vehicular traffic and abrasion caused by backfilling.
Membrane Protection Boards
A tough, flexible polymeric board for protecting tanking membranes against mechanical damage, pedestrian or vehicular traffic and abrasion caused by backfilling. Also protects against ground salts and most corrosive chemicals.
Protection Board
A bitumen solution for priming concrete and masonry surfaces prior to the application of Proofex 3000MR membrane.Sizes: 5, 25 Litres
Proofex Primer
Specially formulated one-part primers for sealing concrete and masonry surfaces to promote adhesion of Bituthene membranes.• Primer B1 – dry surface
application only• Primer S2 – dry/damp surface
and green concreteB1 Sizes: 5, 25 LitresB2 Sizes: 5, 20 Litres
Bituthene® Primers
Primers
Waterproofing84
Sheetseal Primer is used on all vertical or inclined surfaces to aid adhesion of the RIW Sheetseal 226.
Sheetseal Primers
A rubber-modified bituminous priming solution designed to seal and prepare surfaces for the application of self adhesive damp proofing or tanking membranes. It is fast drying and is ideal for ensuring a long-term bond between the surface and subsequent membranes being applied. It may be applied to many substrates including concrete, wood, brickwork, blockwork and metal. Sizes: 5, 25 Litres
IKOpro SA Bitumen Primer
A quick-drying and deep-penetrating priming solution designed to seal and prepare surfaces for the application of torch applied tanking membranes. IKOpro Quick Dry Primer dries in approximately 30 minutes at 20°C, depending on the substrate, and leaves no residual tack. Suitable for use on dry or slightly damp surfaces. It may be applied to many substrates including concrete, wood, brickwork, blockwork and metal.Sizes: 2.5, 5, 25 Litres
IKOpro Quick Dry Primer
A solvent free, one component, polyurethane based primer suitable for all substrates. The highly penetrative formulation seals and primes surfaces prior to the use of Visqueen Axiom Guard liquid waterproofing system.
Size: 4kg
Axiom Guard Primer
All surfaces should be primed with one coat of Preprufe SC1 primer.Sizes: 5, 20 Litres
Preprufe® SC1
Sika 1
An integral liquid waterproofing admixture which when diluted with clean water swells and blocks the pores and capillaries within sand & cement renders and screeds. It is also part of the Sika 1 Pre Batched Mortar System
All purpose waterproofing liquid. Sika-Plug, is Sika’s fastest setting point leak plugging product when used neat, for point leak plugging where high water ingress is present. Setting time dependent on concentration.
Sika 2
Type Set Time Consumption per kg Cement* Pack Size
Sika 2 10 to 20 seconds 0.7 5*Note – all consumption rates vary on set time and required use.
Type Set Time Consumption per kg Cement* Pack Size
Sika 1 10 to 20 seconds 0.75 5, 25*Note – all consumption rates vary on set time and required use.
Ad Mixture
Waterproofing 85
Sika 4 Sika 4A
All purpose waterproofing liquid. Accelerator, waterproofer, also for oil resistant renders and underwater concreting. For point and surface waterproofing against seepage, particularly sea water and sewage. Setting time dependent on concentration.
All purpose waterproofing liquid. Quick setting waterproofer for renders and leak sealing, setting in about 45 seconds. For point and surface waterproofing against general seepage (should be covered with Sika 1 render). Setting time dependent on concentration.
Type Set Time Consumption per kg Cement* Pack Size
Sika 4 25+ seconds 0.15-0.7 5*Note – all consumption rates vary on set time and required use.
Type Set Time Consumption per kg Cement* Pack Size
Sika 4A 45 seconds 0.18-0.35 525*Note – all consumption rates vary on set time and required use.
Additive for improving mortars for waterproofing repairs. Also used as a bonding agent for slip bricks, ceramic tiles etc.For other uses SBR coverage is dependent on mix design.
Nitobond SBR
Type Size CoverageNitobond SBR 2, 5, 10, 25 litres As Slurry Primer = 2 to 3m2/litre
Size5, 25 litres
Bonding and waterproofing admixture to add to screeds, renders and repair mortar mixes.
SBR Bond
Type SizeSwellseal Joint 7mm x 25mm x 10mContact Adhesive 1ltr
Swellseal Joint is a flexible co-extruded vulcanised strip made out of a combination of chloroprene rubber and a hydrophilic resin. The ridged finish assures a better adhesion to concrete. Swellseal Joint has a proven track record in concrete structures subject to high water pressure.
Swellseal Joint
A one-component, polyurethane based, solvent free, hydroswelling mastic, supplied in cartridges and aluminium sausages, for the sealing of construction joints and around pipe penetrations.
Swellseal Mastic
Size310ml Cartridges600ml Sausages
Bentoject is the combination of a hydrophilic bentonite strip and a post-injectable injection tube into one system for the sealing of construction joints in concrete.
Bentoject
Description SizeBentoject 40m kit inc. accessories
Water Stop Accessories
Waterproofing86
Aquatek Mastic P is a one-component, polyurethane sealant and adhesive which can be used as a durable, flexible sealant or for bonding applications on most building materials.Size: 310ml
Aquatek Mastic P
Sealants and Adhesives
A grey, elastomeric water-swellable paste which is applied like a sealant. The hydrophilic properties of Supercast SWX display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water.Size: 310ml
Supercast – SWX
Supercast SW Supercast SW is a swellable waterstop for integral sealing of construction joints in concrete cast in-situ.Supercast SW Adhesive is used to fix Supercast SW10 and SW20 to substrate.Size: 380ml
Supercast – SW Adhesive
An elastic strip made out of a combination of rubber and a hydrophilic resin. Enclosed between prefabricated concrete elements, it will expand in contact with water and in this way seal the joint. Swellseal 3V has a swelling capacity of up to 300 times when in contact with water.Thanks to its high swelling capacity Swellseal 8V is extremely appropriate for applications with polluted water, in case of higher water pressure in zones with changing water table (wet/dry cycles).Type F For sealing construction joints between precast elements.Type S For sealing joints between precast tunnel segments.Can only function properly in a confined space.The expansion will create a certain pressure. Installation in the middle of the joint is preferred.
Swellseal 3V and 8V
Product Type Width Thickness Length3V, 8V Type F 20mm 5mm 15m3V, 8V Type F 20mm 10mm 10m3V, 8V Type F 20mm 20mm 5m3V, 8V Type F 27mm 27mm 5m3V, 8V Type S 20mm 5mm 15m3V Type S 20mm 10mm 5m
Product TypeSwellseal Adhesive 5 litresSwellseal Adhesive P 25 litresSwellseal Adhesive S* 25 litres*For installation of Type S 3V/8V Strips
Waterproofing 87
A range of factory welded intersections, a full range of Grace Waterstops are available to order.
Factory Pre-Fabricated Intersections
TypeFlat LVertical LReverse Vertical LFlat TFlat XVertical T
Factory Welded Intersections A range of factory welded intersections for• Hydrofoil• XHD Hydrofoil• Rearguard SJointing Jigs Use to produce accurate square cuts in Fosroc waterstops and to hold ends to be welded in precise alignment.Heater Blades Used to weld PVC waterstops and intersections. 110v and 220v x 350w blades are available. Non-electric blades are also available.
Waterstop Ancillaries
Vert L Vert TFlat L Flat T Flat X Mixed Flat X
Pre-Fabricated Intersection
Masonry Support and Brickwork Accessories8888 Masonry Support and Brickwork AccessoriesWe have a vast experience in supplying a comprehensive range of products to the brickwork and blockwork requirement on site. We offer everything other than the bricks and blocks themselves, including a project management, take-off and design service.SIG Construction Accessories stock more Ancon products than any other distributor, including off-the-shelf support systems, channel, brick reinforcement and wall ties which are all widely available on our next day service. Specialist items can be designed or sourced as required, just contact one of our Nationwide branches for more information.
Take Offs & Specifications• We provide a take off service whenever required
by the customer.• We work with customers and suppliers to support
or change specifications in order to add value to our customer’s business.
Products Page
Masonry Support Systems 89Windposts 90Lintels 92Surface Fixed Wall Channel 92Brick Reinforcement 93Wall Ties and Restraint Fixings 94Head Restraints 99Wall Starter Systems 100Builder’s Metalwork 101Damp Proof Course Systems and 103 Accessories (DPC) Cloak Units, Cavity Tray and Abutment Trays 107Crack Stitching Injection 109Brickwork Protection 110Brickwork Joint Filler 111
Masonry Support and Brickwork Accessories 89
Masonry Support
Optima Standard Support Systems
CFA Continuous Angle Support System
MDC Bracket Angle Support System
Thermal Breaks
Short two-step angles, interchangable brackets and locking wedges. This system is more adjustable than welded bracket systems which are fast and easy to install without detailed layout drawings.
Continuous angles are usually suitable for applications where cavities are small, or there is a requirement for the cavity to be closed at the support position.The angles will normally be supplied in lengths of up to four metres.
This bespoke system can carry over eight metres of brickwork and can accommodate any width of cavity from 40mm. The brackets are welded to the angle and the material content of both components is optimised to ensure an economic solution.
Masonry support systems from Ancon can be supplied with Thermal Breaks to minimise cold bridging, and improve the energy efficiency of your building project.
Masonry Support and Brickwork Accessories90
Windposts
WP1 and WP3 Windposts
WP4 Windposts Windpost Ties
These are channel section windposts which are designed to be installed within the cavity leaving the blockwork undisturbed. The windposts are complete with end connections and ties which fit into the vertical slots in the flanges of the channel section.Bespoke Design Available
These are generally used in internal blockwork walls that have a ‘fair faced’ finish to both sides and where the windposts cannot protrude beyond either face.Sometimes referred to as ‘spine’ posts they are flat plates designed to fit within the wall. Although the depth of a WP4 post is limited by the width of the masonry (ideally 20mm less than the wall width) the thickness of the post can vary to increase its load capacity.Blockwork is tied through the post. Debonded ties can be used if the post is positioned at a movement joint.Bespoke Design Available
A range of ties are available to suit Ancon Windposts.SDN SDN Ties (with drip) are used to the outer leaf.SPN SPN Ties to the inner leaf.SNS SNS Ties are used across the posts in the inner blockwork and can be supplied with a debonding sleeve for use where there is a vertical movement joint.
WP2 Windposts are angle section windposts designed for either small cavities or where wind loads are high. One leg of the angle windpost is built into the blockwork, and the blockwork is tied through the leg of the windpost to minimise any possible movement or cracking of internal finishes. If a vertical movement joint is required in place of a tied joint, debonded ties can be supplied.Bespoke Design Available
WP1 WP3
WP2 Windposts
WP2
SDN
SPN
SNS
Masonry Support and Brickwork Accessories 91
Typical Windpost Fixing Details
Base Connection of a WP3 Windpost to Combideck.
Top Connection of a WP3 Windpost to the Underside of a Concrete Beam.
Top Connection of a WP3 Windpost to the Face of the Concrete.
Top Connection of a WP2 Windpost to the Underside of a Steel Beam.
Top Connection of a WP2 Windpost to the Underside of a Timber Wall Plate.
Base Connection of a WP2 Parapet Post to the Top and Face of a Concrete Slab.
Top Connection of a WP3 Windpost to the Top of a Timber Wall Plate.
Top Connection of a WP3 Windpost to the Underside of a Steel Beam.
Base Connection of a WP2 Windpost to the Top of a Concrete Slab.
Masonry Support and Brickwork Accessories92
A complete range of galvanised and stainless steel lintels are available to suit all domestic and commercial applications. The Housing and Unilintel ranges are designed to suit the loading conditions found in the majority of residential and commercial buildings.The standard range consists of:• Housing Lintels • Unilintels • Channel Lintels • Solid Wall Lintels • Single Leaf Lintels • Timber Frame Lintels • Box Lintels
Solutions can be supplied for complex features such as corbels and other architectural details.Special cranked, bay, corner and cantilevered corners are available in addition to the following arch shapes:• Segmental arch• Semi-circular arch• Apex arch• Gothic arch• Flat top arch• Double arch• Arched on plan
Lintels Custom Lintels
Lintels
Surface Fixed Wall Channel
25/14 Restraint System Surface Fixed Channel
The Ancon 25/14 channel system is designed to tie brickwork to steel studding. Self-drilling screws fix through the channel and the insulation material, into the steel. Once the channel is installed, Ancon SD25 wall ties can be positioned at any point along its length and are built into the bed joints of the outer leaf of brickwork. The spacing of ties is based on the height of building and its geographical location.
Channels are supplied plain-backed for surface fixing to either concrete or steelwork.
When bolting channel to concrete or steelwork it is important to utilise all fixing holes (except with 25/14 channels), incorporating the square washer provided and ensuring its correct orientation to achieve the allowable loads. 25/14 Channel should be fixed to steelwork at 450mm vertical centres with self-drilling screws.
For Cast-in-Channel available – see page 57.
Masonry Support and Brickwork Accessories 93
Brick Reinforcement
AMR Reinforcement AMR - X Reinforcement
Ancon AMR is a steel reinforcement, designed to be located in the horizontal bed joint to strengthen masonry panels. The longitudinal steel wires are flattened to ensure good cover is maintained even when lapped or used with wall ties.
Ancon AMR – X is based on the existing Ancon AMR masonry reinforcement, but with shaped rather than straight cross wires. This innovative design is a simple, cost effective way to correct poor site practice.
If applied to dry bricks or blocks, only the modified cross wires are in contact with the masonry; the longitudinal wires are elevated.
Type Length Wire Diameter Material WidthAMR 2.7m 3, 3.5, 4, 4.5, 5mm Galvanised & Stainless Steel 60, 100, 150 and 175mmAMR-X 2.7m 3, 5mm Stainless Steel 60, 100mm
Metal Lath and Mesh
Range of expanded metal sheets and coils for internal and external plaster key applications and anti-crack control.
Coil Mesh Lath is produced for brick and block-work reinforcement. Its primary usage is to prevent cracking.
Bricktor® CCR Bricktie®
Bricktor® CCR is a crack control reinforcement product which can be used for both standard masonry joints and 2-3mm thin joint systems.
Reinforcement for collar jointed walls.Bricktie® is a ladder type masonry reinforcement element that consists of a 20 x 3mm flat tie welded to two longitudinal flattened reinforcing wires.
Type Length Wire Diameter Material Width Tensile StrengthBrickforce® 2.7m 3, 3.5, 4, 4.5, 5mm Galvanised & Stainless Steel 60, 100, 150, 175mm 500 N/mm2
Bricktor® CCR 25m 1.25mm Galvanised & Stainless Steel 60, 100, 160, 180mmBricktie® 2.7m 3.5, 4, 5mm Galvanised & Stainless Steel 175mm
Brickforce®
Brick reinforcement consists of two main parallel wires joined by in-line welded cross wires. Main wires are manufactured to a flattened profile to simplify location into the mortar joint without steel build-up problems at lap positions corners/junctions, or when used in conjunction with wall ties.
Masonry Support and Brickwork Accessories94
Type Application Density Max Building Height Geographical Location
Type 1
Heavy duty tie suitable for most building sizes and types. Not very flexible and not recommended where there is expected to be excessive differential movement between leaves.
2.5 ties/m2 3-4 ties/m2 at unbonded edges Any height
Suitable for most sites. However, for relatively tall or unusually shaped buildings in vulnerable areas, the tie provision should be calculated.
Type 2
General purpose tie for domestic and small commercial buildings. May be suitable for buildings exceeding 15 metres if shown to be adequate by calculation.
2.5 ties/m2 3-4 ties/m2 at unbonded edges 15m
Suitable for flat sites. Basic wind speed up to 31m/s and altitude not more than 150m above sea level.
Type 3 Basic wall tie generally as Type 2 above.
2.5 ties/m2 3-4 ties/m2 at unbonded edges 15m
Suitable for flat sites. Basic wind speed limited to 27m/s and altitude not more than 150m above sea level
Type 4Light duty wall tie suitable for box-form domestic dwellings with leaves of similar thickness.
2.5 ties/m2 3-4 ties/m2 at unbonded edges 10m
Suitable for flat sites in towns and cities where the basic wind speed is limited to 27m/s and altitude not more than 150m above sea level.
Type 5
Timber frame tie suitable for domestic houses and industrial/ commercial developments of up to three storeys.
4.4 ties/m2 3-4 ties/m2 at unbonded edges 15m
Suitable for flat sites in towns and cities where the basic wind speed does not exceed 25m/s and altitude is not more than 150m above sea level
Type 6 As Type 5 but suitable for developments of up to four storeys. As Type 5 15m
Suitable for flat sites in towns and cities where the basic wind speed does not exceed 25m/s and altitude is not more than 150m above sea level
Type 7
As Type 5 but suitable for developments of between five and seven storeys, being designed to accommodate the increased vertical differential movement.
Calculated for actual performance required for each site location
18m Calculated for actual performance required for each site location
For complete information refer to PD6697 and BS 5268-6:1
Selection of Wall Ties to PD6697 and BS 5268-6:1
Wall Ties and Restraint Fixings
Masonry Support and Brickwork Accessories 95
Flat Safety Wall TiesType Product Name/Code Lengths Box Quantity
Type 1 SST1, 2000, MF1, PT1, VST1, WT1 200, 225, 250, 275, 300mm 250
Wire TiesType Product Name/Code Lengths Box Quantity
Type 2 RT2, 1000, MT2, MPT, EN2, WT2 200, 225, 250, 275mm 250
Type 4 HRT4, 1000, MT4, PT, VE4, WT4 200, 225, 250, 275mm 250
Thermal Wire TiesType Product Name/Code Lengths Box Quantity
Type 1 Ancon Teplo1, Basalt Fibre 200, 225, 250, 275mm
Type 2 Ancon Teplo2, Basalt Fibre 200, 225, 250, 275, 300, 325, 350, 375, 400, 425mm
Type 4 Ancon Teplo4, Basalt Fibre 200, 225, 230mm
Tie Selector
Masonry Support and Brickwork Accessories96
For special ties choose the tail, shank and head required using the letter reference system and give the overall length of tie required.
Specialist Tie Selector
Tall
Shank
Head
_ _ 40* To fit 40/25
Tail s
Shank D
Head 21
Ancon SD21 wall tie
Example using Reference System
Masonry Support and Brickwork Accessories 97
Remedial Wall Ties
Type Description
Ancon MM63 Mechanical/Mechanical Used when tying together two leaves of solid materials, this tie has mechanical expanders at each end. Requires 10mm holes.
Ancon RM63 Resin/MechanicalFor use when the material in the inner leaf is perforated, of low density or afriable material. A resin fixing may be used to eliminate any imposed stress. Requires 10mm holes.
Staifix RR
Used where mechanical expanders are unusable. Normally inserted into a hole, but if test facilities are required, a 12mm hole must be used. A plastic sieve can be used to retain resin and is particularly useful in perforated brick or hollow block-work. A 12mm hole is required to fit the sieve.
Stairib Bar Stainless steel ribbed bar, resin-grouted into the inner and outer leaves.
Ancon AC 31
Used where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm hole. The triangular end sits in the bed joint. Ancon AC 31 supplied with a drip or a neoprene ring.
Ancon AC 31C Similar to the AC 31 but cranked by 25mm to aid fixing to the inner leaf.
Cameron T47
Used for the repair of mass brickwork with an unbonded brick façade, sometimes built from snapped headers. The T end is built into the bed joint and perpend, and hidden when the brickwork is repointed
Fischer FIS P 380 C Resin
This styrene-free injection resin is quick setting and suitable for a wide range of applications. The two components are safely mixed together inside the nozzle. Automatic mixing ensures an accurate blending of the components, and being mixed only as required, the minimum of wastage. Resin guns and additional mixing nozzles are available.
Masonry Support and Brickwork Accessories98
Two-Part Tie
Cavities exceeding 150mm are sometimes required. This necessitates longer ties which can be difficult to balance and keep horizontal when built into the inner leaf. The Ancon Two-Part Tie has one section built into the blockwork; the other section is then fixed as the outer leaf is built.The inner tie is manufactured in a standard length of 170mm. Variation in the cavity width is accommodated by the length of the outer tie. Insulation Retaining Clips can be supplied to fit the inner section.Ancon Two-Part Ties sustain loads which exceed the requirements for a Type 2 tie to PD6697 for cavities up to 300mm. An embedment of 75mm is required at each end.
Fastrack Channel
Ancon Fastrack Channel is built into the inner leaf of blockwork ready to take an Ancon SD28 or similar tie for the outer leaf. This method of construction avoids the dangers of projecting ties (Tie lengths = open cavity + 50mm).Various sizes available
Hammer-on Section
Available in five sizes to accommodate a steel thickness from 7mm to 25mm, this fixing is simply hammered onto the flange. It can be utilised either on a column with a tie or on a beam with an internal head restraint.(Tie lengths = open cavity + 50mm).Various sizes available
Column Tie
The Column Tie clamps to the flange of a column. It accommodates a steel thickness from 6mm to 25mm and should be installed at 225mm vertical centres. Manufactured in lengths to suit the application, it can feature a drip for use across the cavity or a plain shank for installation back into the inner leaf.
Masonry Support and Brickwork Accessories 99
Ancon SAH Sliding Anchors have stems which fit within the cavity and accept ties that slide to accommodate vertical movement. Available with six different head options as standard, they are supplied with one-way or two-way ties with safety ends.The standard fixing hole is 12mm diameter to suit Ancon M10 Single Expansion Bolts or M10 T Head Bolts to fit Ancon 28/15 Channel. Bespoke available
The Ancon FHR Head Restraint is used for restraining the top of internal walls or the internal leaf of a cavity wall. The two angles clamp the top of the wall and have 9mm diameter holes to suit M8 bolts. They are supplied with two holes in the longer angle to allow the restraint to fit 100mm and 140mm blockwork. Each restraint can resist a service load of 1kN.
SAH - UO SAH - UT SAH - UC
SAH - T SAH - U SAH - UF
340mm min.600mm max.
38mm 38mm
340mm min.600mm max.
45mm
25mm
340mm min.600mm max.
35mm min.
Offset to suit
15mm
340mm min.600mm max.
95mm50mm
160mm
160mm
340mm min.600mm max.
130mm
15mm
130mm
160mm
340mm min.600mm max.
20mm to centre of slot standard length 135, 50mm
Head Restraints
IHR – Internal Head Restraint SAH – Sliding Anchors
FHR Head Restraint
The Ancon IHR is used for restraining the top of internal walls or the top of the inner leaf of a cavity wall. The opening at the front of the channel stem is sealed to prevent mortar ingress and to ensure that vertical movement can take place between the blockwork and the structure.
Slot is positioned at the centre of the tie. Standard length 200, 230mm
SIS SPI
Stainless steel set screws, nuts and washers are available in a range of diameters and lengths in grades A2 (1.4301) and A4 (1.4401). Set screws can be shrink-wrapped and supplied complete with nylon washer to prevent bi-metallic corrosion when fixing to steel.
Set Screws
Masonry Support and Brickwork Accessories100
These screws feature a shaped drill tip of hardened steel that allows installation without pre-drilling. Hi-thread screws accommodate insulation between a surface-fixed channel and the steel frame.
Self Drilling Screw
Single expansion bolts fix into a hole which is similar to the diameter of the bolt. This allows the hole to be drilled through the hole in the item to be fixed. The single expansion bolt is a cost-effective anchor, available in grade A4 316 (1.4401 or 1.4571) stainless steel in a wide range of sizes.
Single Expansion Through Bolts
The 36/8 Wall Extension System can be supplied with either SP36 ties or, where some longitudinal movement must be accommodated at the joint, PP36 ties complete with debonding sleeves. The system is available as a kit comprising a length of 36/8 channel 2400mm long, ten ties, ten plugs and screws. The design shear strength is 3.7kN over a wall height of 2400mm.The channel can be supplied in lengths of up to 3.4 metres with each length having a series of holes to allow fixing to the existing wall.
This system includes all necessary fixings to join a single skin of masonry, 2400mm high, to an existing wall. Each pack includes two fixing strips, five plugs, five washers, five screws and ten wall ties.Suitable for wall widths from 60mm to 250mm, this system provides a design shear strength of 4kN over a height of 2400mm.Wall Ties slide within the fixing strip to course with the bed joints of any masonry unit. This Universal Wall Starter System meets the technical requirements of the NHBC.
Wall Starter Systems
36/8 Wall Extension System Staifix Universal Wall Starter System
The quick, easy-to-fix way to tie-in new walls to existing walls without cutting out brickwork. Suitable for walls of up to 3 storeys high, ie up to 8m maximum.VariationsWall StartersIndividual flanged products designed for specific widths of new walls.UniStartersThe universal wallstarter for any wall. The flat flange-free
design means they can be used to construct any wall between 75mm and 250mm thick.Multi-StartersFeaturing a ‘turn-n-slide tie’ to accommodate all sizes of brick or block. The Multi-Starter is suitable for all wall widths from 60mm-250mm.
Wall Starters
Masonry Support and Brickwork Accessories 101
The BAT S.P.H. Joist Hanger is a single piece timber to masonry hanger for building into the inner leaf of external cavity walls and internal walls.All hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists. 75mm load bearing surfaces.
SPH Joist Hangers
Widths38, 44, 47, 50, 63, 75, 89, 100, 125, 150mm
BAT straps are manufactured in two types. Heavy Duty to provide horizontal restraint and Standard to provide vertical restraint against wind pressure and uplift forces.
BAT Straps
Herringbone Joist Struts
Herringbone Joist Struts provide stability to floor joists and significantly reduce labour compared with timber strutting.To suit joists 150 - 225mm.
Eliminates the disadvantages of skew nailing trussed rafters to timber wall plates: damaged connector plates, split rafters or wall plates.
Type Joist Centres Length Pack Size Hole DiameterHJS400 400mm 480mm 50 4mmHJS450 450mm 523mm 50 4mmHJS600 600mm 660mm 50 4mm
Heavy duty hanger for the support of timber to timber or timber to masonry, concrete, etc with provision for nailing or bolting.
Maxi Speedy Joist Hangers
Type Thickness Width Nail Hole Bolt HoleMS240, 335, 380 1.2mm 38, 47, 50, 63, 75,
100mm 4.5mm 14mm
MS440 1.5mm 38, 47, 50, 63, 75, 100mm 4.5mm 14mm
MS500, 560, 620 1.5mm 38, 47, 50, 63, 75,
100, 122, 150mm 4.5mm 14mm
Speedy Joist Hangers
Truss Clips
Speedy Joist Hangers provide a quick and safe method of joist trimming for light and medium duty joints.
Builder’s Metalwork
Masonry Support and Brickwork Accessories102
BAT Multi-Grip Framing Anchors
These anchors offer the most effective and economical method of providing strong, mechanical joints for framing of timbers.Product VariationsMFAAL & MFAARFor anchoring rafters and trusses to wall plate.MFABL & MFABRFor anchoring headers to studs, beams to posts and studs to plates.MFACFor right or left handed use – for anchoring joists to beams, stringers to headers and hip joints.
BAT Angle Plates
Used as a safe and economical method of connecting joists to purlins.Length Width Hole Diameter Material Bag Qty
300mm 30mm 4mm pre-galvanized mild steel 50
Designed for multi-purpose fixing applications and can be used as replacement cleats, nailed or bolted.Various sizes available to suit multiple loadsReinforced Angle Brackets also available
BAT Angle Brackets
Splice Plates
Minimum timber thickness 50mm, all fixing nails included, 8 sets of 4 per box.
Ref Size Joist Depth
Resistance Movement
Shear Capacity
Aprox. Nails Per Plate
L61 18 x 61 x 400 125/150 1.5 kN 13 kN 27
L80 18 x 80 x 560 175/200 1.5 kN 13 kN 52
L98 18 x 98 x 560 225/250 1.5 kN 13 kN 65
Bat U Nail Plate
A plate system which enables timber structures to be made on site or in the builders workshop, since it is nailed by hand.
Length Width51, 100, 152, 203, 254, 305 and 354mm 76, 114 and 152mm
Masonry Support and Brickwork Accessories 103
Expamet Fixing Band
Sole Plate Angles
Junction Clip
Safe Plate
An easy-to-use coil strip designed for all types of light fixing applications.
Angles that positively locate timber sole plates to concrete floor slabs using masonry fixings as required, without penetrating the dpc.
Can be used instead of noggins, at wall junctions and at contact points between ceiling and walls when fitted at 300mm centres.Box Size: 250
For protection of plumbing and electrical wiring against random nailing into studs.SAF1 90 x 54mm200 per box
Ref Width Thickness LengthMFBA 20mm 0.9mm 10mmMFBB 20mm 0.7mm 10mm
Ref Width Length UpstandSPA112 76mm 112mm 40mmSPA162 76mm 162mm 40mm
Zedex CPT High Performance DPC is a new generation of damp proof course. Made from Co-Polymer Thermoplastic (CPT), it possesses the characteristics necessary for it to perform effectively under harsh conditions.Zedex CPT High Performance DPC provides superior strength, adhesion and water impermeability properties. Improved toughness helps to avoid damage during installation and is compatible with other Visqueen products.
Hyload Original is the UK’s leading high performance DPC and cavity tray system, having established its trusted position over 40 years of continuous use. A high performance polymeric DPC, Hyload Original is suitable for providing damp proofing and cavity trays in all applications, including brick, block, stonework and concrete in both solid and cavity wall construction. Use where DPC colour is not critical. Hyload Original is resistant to compression even under the heaviest of wall loading and will not extrude when under load.
Damp Proof Course Systems and Accessories (DPC)
Zedex CPT Hyload Original
Width Length100 - 1400mm 20m
Width Length100 - 1400mm 20m
Masonry Support and Brickwork Accessories104
Polythene DPC
Designed to prevent the passage of moisture in brick and blockwork from external sources. This is a cost effective and durable domestic DPC for both vertical and horizontal applications. The pronounced emboss improves mortar adhesion.
Width Length100 - 1200mm 30m
Visqueen Zedex High Bond DPC is a high performance heavy duty damp proof course suitable for general cavity tray applications including parapet walls, beneath copings and cappings, in gas resistant DPC applications and complex detailing work at ground level. Visqueen Zedex High Bond DPC can be torch bonded to masonry units and all laps are homogenously sealed during the torch bonding process.Uses: Gas, Damp
Zedex High Bond DPC
This is a flexible polyethylene DPC with an internal aluminium foil designed to prevent the moisture transmission of carbon dioxide, radon and methane gases as well as water.Uses: Gas, Damp
Gas Resistant DPC
Width Length300 - 1000mm 30m
Width Length450, 600 1000mm 8m
Gas Resistant DPC
Masonry Support and Brickwork Accessories 105
Widths Length165, 180, 225mm 8mSuitable for both 100mm and 140mm blockwork
Widths Length165, 180, 225mm 8mSuitable for both 100mm and 140mm blockwork
Hyload Insulated DPC has been developed to minimise cold bridging when closing masonry cavity walls around openings. It is designed to be installed as work proceeds and is resilient enough to accommodate irregularities in cavity closers and normal site handling.Hyload Insulated DPC – bitumen polymer laminated to cross-linked polyethylene foam insulation.Uses: Damp
Which will minimise cold bridging when closing masonry cavity walls around openings, whilst meeting current and proposed fire regulations in England, Scotland and Wales. In addition Insulated FR also meets the requirements of Part L (England and Wales), and J (Scotland).Uses: Fire Retardant
Hyload Insulated DPC (formerly Ruberclose)
Hyload Insulated FR DPC (formerly Ruberclose)
Due to its natural mortar colour, Hyload MortarMatch greatly reduces the visual impact of the black line created where traditional DPCs protrude from the mortar.Uses: GasColour: Brown or White (specific colours available on orders over 600lm)
Hyload MortarMatch
Width Length100 to 900mm 20m
Hyload Gastite DPC is a methane and radon resistant membrane that allows you to meet government guidelines for gas protection. With more and more brownfield sites being developed, a DPC that is effective against the disruptive effect of gases through masonry is an essential component of your system. Hyload Gastite DPC is a rubber modified bitumen membrane with a polyester reinforcement and an aluminium foil core. It is sand finished on both surfaces. Hyload Gastite DPC should be used together with self adhesive Gastite DPM or loose laid Gastite LL for total security.Uses: Gas
Hyload Gastite DPC
Width Length100 to 900mm 8m
Masonry Support and Brickwork Accessories106
All joints in lengths of DPC must be a minimum of 100mm, lapped and bonded using Zedex Jointing Tape.
Zedex CPT Jointing Tape
Size2m x 50mm
Size Length Pack Size25mm 2m 50, 500
Pack Size1000 per bag
When surface fixing or post fixing to the cavity face of the inner leaf, a fixing strip should be used. The surface should first be primed, the DPC then bonded to the inner leaf using Zedex Jointing Tape and then secured using Zedex Fixing Strip and Pins at 150mm intervals.
Zedex CPT Fixing Strip and Pins
Designed to enable contractors to make effective waterproofed joints between DPC’s, cavity trays and pre-formed cloak units. The system works by providing rigid support across the cavity allowing pressure to be applied to effect a waterproof joint.
Hyload DPC Joint Support System
The Fixing Strip is a semi-rigid plastic strip 25mm x 3mm x 2m pre-drilled at 150mm centres. It is used when surface fixing any Ruberoid high performance DPC to the inner leaf.
Used with Hyload DPC Fixing Strip, Fixing Pins for Masonry can be used for surface fixing to solid internal substrates such as blockwork, stone and concrete.Composite inner skins require Hyload DPC Fixing Pins for Insulation to ensure correct fixing.
Hyload DPC Fixing Strip
Hyload DPC Fixing Pins
Pack Size Coverage Length Width20mm x 2m 3m2 8m 100 to 900mm
Masonry Support and Brickwork Accessories 107
A thick synthetic rubber mastic adhesive with gap filling properties up to 6mm suitable for bonding Hyload DPCs and pre-formed cloak units to a wide range of common building materials. No primer is required.
A synthetic rubber/resin mixture supplied in 500ml cans. It is suitable for bonding DPC to DPC, and DPC to pre-formed cloak units. Before use, ensure that surfaces to be bonded are clean and dry. Apply Hyload DPC Lap Adhesive to both surfaces and allow to dry. Bring surfaces together and apply firm pressure to create a permanent bond.
A double sided self adhesive bituminous tape for bonding DPC to DPC, and DPC to pre-formed cloak units. Before use, ensure that surfaces to be bonded are clean and dry.
Hyload DPC MasticHyload DPC Lap Adhesive
Hyload DPC Jointing Tape
Size Coverage400ml Cartridge/2.5 Litre tin 1.2m2 to 2m2
Suitable for both 100mm and 140mm blockwork
Pack Size Coverage1 x 500ml can 3m2
Size10m x 100mm
The built-in cloak units are designed to accommodate 50, 75 or 100 mm cavity widths and a 150 or 225mm rise in the cavity tray.
Cloak Units, Cavity Trays and Abutment Trays
Built-In Cloaks
The standard surface fixed cloak units are designed for 50, 75 or 100mm cavity widths and for a 150mm rise in the cavity tray.
Surface-Fix Cloaks
Internal/External Corner (brick/block).Various sizes available
Standard Pre-formed Cloak Units – Type 7
External Corner (surface fixed).Various sizes available
Standard Pre-formed Cloak Units – Type 6
Masonry Support and Brickwork Accessories108
Suitable to dress over the upstand of a secret gutter or soaker.
Short Lead Flashings
Standard Pre-formed Cloak Units – Type 1
Various sizes availableBespoke options available
Standard Pre-formed Cloak Units – Type 2
Various sizes availableBespoke options available
Internal Corner (surface fixed).Various sizes available
Standard Pre-formed Cloak Units – Type 5
Internal Corner Reversible.
Standard Pre-formed Cloak Units – Type 8
Angled Stop End (right or left hand).
Various sizes available
Standard Pre-formed Cloak Units – Type 8S
Column Stop End (brick/block or surface fixed).
Standard Pre-formed Cloak Units – Type 10
External Corner.
Standard Pre-formed Cloak Units – Type 9
Stop End (brick/block or surface fixed).Various sizes available
Standard Pre-formed Cloak Units – Type 3 & Type 4
Masonry Support and Brickwork Accessories 109
Staifix-Thor Helical Crack Stitching Kit Crack Stitching & Bonding
The Staifix-Thor Helical Crack Stitching Kit is a high strength, non-disruptive solution for the permanent repair of cracked masonry. The stainless steel helical bars are chemically bonded into bed joints to stitch cracks, redistributing tensile forces and stabilising the structure. On completion, the bar and grout are concealed, retaining the original character of the wall.
Cracked masonry is best stabilised by bonding Helifix stainless steel rods into appropriate bed joints or cut slots. Tensile loads are redistributed along the masonry to minimise further developments of the crack which may occur with simple injection methods.Size: 3 Litres
HeliBond Cementitious GroutHelibar
High performance, injectable, cementitious grout for bonding metal components into masonry type substrates. Helibond is a two-part, non-gassing, cement based grout suitable for injection with a hand or power applicator. It is supplied in a pail containing the dry powder and liquid components individually packaged for mixing using a paddle mixer. It includes an expansion agent to compensate for shrinkage in the hardened state.Size: 3 Litres
Helical stainless steel structural reinforcing rod for masonry repair and new construction.
Helibar
Helical stainless steel structural reinforcing rod for masonry repair and new construction.
Heavy duty slip membrane is designed for use in sliding Joints in reinforced concrete structures where load bearing characteristics are present, and low friction resistance is required. The strip is used in two layers to form a load bearing, low friction sliding joint.
Slip Membrane
Slip MembraneSize Roll Size150mm 25m300mm 25m
AdhesiveHigh quality adhesive for bonding filler boards, polystyrene, insulation and protection boards to a wide range of surfaces. 5 litre cans.
Ideal for protection against the corrosion of pipe work, metal surfaces and cable below ground or under water. Also for the temporary sealing of fractured mains and cable joints.Sizes: 50, 75, 100mm x 10m
Denso Tape
A primer for Denso Tape and a rust preventative for exposed metal.Size: 25kg tubs
A mastic for all sealing, filling and caulking purposes.Size: 3kg
Denso Paste
Denso Mastic
Crack Stitching Injection
Masonry Support and Brickwork Accessories110
Brickwork Protection
ALTIFLEECE has been designed to act as a barrier against frost, heavy rain and also strong sunlight which can dry the mortar mix prematurely. The permeability of the fabric provides a stabilised climate for optimum mortar curing conditions.ALTIFLEECE is a lightweight but strong material that has a central waterproof section and reinforced edges with slits for tethering. The material on either side of the central waterproof section allows air and water vapour to pass through. The material can be cut across the width to fit the length of wall requiring protection.ALTIFLEECE is strong enough to withstand wear and tear typical on building sites.Features & Benefits• Unique patented design• Attractive, purpose made product• Protects mortar and brickwork against the elements• Provides optimum conditions for curing
• Durable and lightweight• Easy to use• Tried and tested at CE
Exclusive to ALTIFLEECE
Size1.37 x 46m
Hessian Blankets
Size1.5 x 30m
Hessian Rolls for frost protection and curing of concrete and brickwork.
Masonry Support and Brickwork Accessories 111
Brickwork Joint Filler
Exclusive to ALTIFILLER
Closed Cell Polyethylene SheetsSize Thickness1 x 2m 10, 12, 15, 20, 25mm
Closed Cell Polyethylene StripsWidth Thickness100, 125, 150, 175, 200, 225, 250, 275, 300mm 20, 25mmSupplied in 2m strips.
Closed Cell Polyethylene RollsWidth Thickness100, 150, 175, 200, 225, 250, 275, 300mm 10, 12, 15mmSupplied in 10m rolls.
Closed Cell Expanded polyethylene foam is supplied in roll, sheet or strip form. High performance expansion joint fillerboard, for concrete slab construction and brickwork joints, which is supplied with an undercut to the depth of sealant for controlled void formation and easy removal.
Insulation & Ventilation112112 Insulation & VentilationA full range of fire protection, thermal insulation and ventilation products are available. Products from all leading manufacturers can be supplied, including accessories for unusual details and bespoke manufactured items.
Products Page
Cavity Wall Insulation 113Cavity Closers and Accessories 114Fire Protection 119Ventilation 121
Insulation & Ventilation 113
Cavity Wall Insulation
Used where small residual cavity is needed to avoid risk of rain penetration. Residual cavity must be minimum of 25mm. PIR & Phenolic insulants most suitable to acheive current u-value performance requirements. Wall tie or suitable fixing required
Partial-Fill Cavity Wall
No need for residual cavity. Suitable for mineral wool and some expanded polystyrene insulants. Insulation thickness must be at least 50mm. Wall tie or suitable fixing required Foil faced insulants are not suitable for this application.Note: Always seek guidance when installing cavity wall insulation in high exposure zones.
Cavity Wall Insulation
Type Full Fill Cavity Wall
Partial Fill Cavity Wall
Kingspan Thermawall TW50 No YesKingspan KoolTherm K8 No YesKnauf DriTherm Cavity Slab Yes NoRockwool Cavity (Full Fill) Yes NoIsover CWS Yes NoRecticel Eurowall Cavity No Yes
Full-Fill Cavity Wall
Insulation & Ventilation114
The ALTICLOSER has been designed to provide an easy, effective and economical alternative to using reveal blocks, when closing the cavities within openings in masonry walls for windows and doors.ALTICLOSER has BBA Technical Approval and satisfies the requirements set out by the BRE for Thermal Insulation “Avoiding Risks” and “Approved Document L of the Building Regulations”.ALTICLOSER UPVC outer acts as a damp proof barrier and a substrate for the application of plaster. Insulated XPS core prevents thermal bridging problems. Provides a quicker window and door opening construction whether by retrospectively fitting the closer or by building the product as a window former and straight edge. Straight joint – no jointing
clips required. Minimum wastage during construction – contributes to the Code for Sustainable Homes’ points score. Can be cut down to suit applicaton. Preformed available Bespoke availableALTICLOSER is available in the following widths.
Cavity Width Thickness Length 50mm (single extrusion only) 25mm 2400mm65mm (single extrusion only) 25mm 2400mm75mm 25mm 2400mm85mm 25mm 2400mm90mm 25mm 2400mm95mm (single extrusion only) 25mm 2400mm100mm 25mm 2400mm125mm 25mm 2400mm150mm 25mm 2400mm
Cavity Closers and Accessories
ALTICLOSER Exclusive to
Insulation & Ventilation 115
ALTICLOSER FR Exclusive to
ALTICLOSER FR is a UPVC cavity closer with a polythene enclosed rock mineral wool core suitable for cavities from 50mm – 100mm.• Tested to the general principles of BS 476
Part 20: 1987• Fire resistance performance of 30 minutes integrity &
30 minutes insulation• Assists in satisfying the requirements of Approved
Document L & C (England & Wales) & The Scottish Technical Handbook
• Intended for second fix applicationsPreformed available Bespoke available
Cavity Width Thickness Length50mm 25mm 2400mm75mm 25mm 2400mm85mm 25mm 2400mm100mm 25mm 2400mm
Insulation & Ventilation116
ALTICLOSER FR + Exclusive to
ALTICLOSER FR + is a UPVC cavity closer with a foil covered rock mineral wool core suitable for cavities from 100mm - 200mm.• Tested & assessed according to the general principles of
BS EN 1363-1:1999• Fire resistance performance of 60 minutes integrity &
30 minutes insulation• Assists in satisfying the requirements of Approved
Document L & C (England & Wales) & The Scottish Technical Handbook
• Intended for second fix applicationsPreformed available Bespoke available
Cavity Width Thickness Length50mm 25mm 2400mm75mm 25mm 2400mm85mm 25mm 2400mm100mm 25mm 2400mm
Insulation & Ventilation 117
Size To suit cavity size Length of closer50mm 50-74mm 2.4m75mm 75-99mm 2.4m100mm 100-109mm 2.4m110mm 110-124mm 2.4m125mm 125-149mm 2.4m150mm 150-155mm 2.4m
Kingspan Kooltherm Cavity Closer is a PVC-U extrusion with a rigid thermoset insulation core. Passes 1 hour fire test with PVC windows and up to 150mm cavities.Preformed available Bespoke available
Kingspan Kooltherm Cavity Closer
Type Colour Cavity Standard LengthThermabate 50 Brown 50-60mm 3mThermabate 65 Black 65-74mm 3mThermabate 75 White 75-84mm 3mThermabate 85 Yellow 85-94mm 3mThermabate 90 Orange 90-99mm 3mThermabate 100 Green 100-110mm 3m
Kingspan Thermabate Cavity Closer
Thermabate provides a simple and efficient method of closing cavities, preventing condensation, pattern staining and mould growth frequently associated with traditional methods of closing cavities. The need for cut bricks or blocks to close the cavity is eliminated.Preformed available Bespoke available
Standard Flange Clip
Use as a weathercheck, for fixing closer profiles to window frame and for retaining partial fill insulation batts in the cavity.
Reveal Clip
Aids the construction of check reveals and gives added protection to the frame.
Flange Extension Clip
Clips over the Thermabate to extend the width of the fixing flange. It enables positive fixing of frame over suspect masonry.
Jointing Clip
Connects two Thermabate sections for use in cavities greater than 110mm wide.
Profile Bracket
Enables Thermabate rigid box sections to be formed into a profile. This is built in as the work proceeds and creates a pre-formed opening into which window frames can be fitted later. The brackets are supplied in sets of four.
Wall Tie Fixing
An optional fixing particularly useful for wider cavities and/or using Thermabate to form openings. The different angled ends slot securely between the tee flanges at the ‘back’ of the Thermabate section and keys fully into the mortar bed joint of either masonry skin. The fixings are supplied in packs of 150.
Insulation & Ventilation118
SF Multicloser
TF Multicloser
TF1000
TF2000
TFR1000
A versatile and economic PVCu insulated closer for cavity widths between 50 and 100mm. Second fix applications.One profile suits 5 cavity widths – insulation trimmed on site. Accepts all window and door frame material. Insulation is zero rated for ozone depletion potential (ODP)Length: 2.4m Pack Size: 10 Lengths per packCavity Width: 50-100mmPreformed available Bespoke available
A versatile insulated cavity closer that is easy to use to achieve building regulations where cavity widths are 100mm-150mm. Can be used for first or second fix.Overcomes cavity width variations with one profile to cover 4 cavity widths.Length: 2.4m Pack Size: 6 Lengths per packCavity Width: 100-150mmPreformed available Bespoke available
A versatile insulated closer. Suitable for first or second fix applications. Check reveal option also available.Accepts all window and door frame material. Insulation is zero rated for ozone depletion potential (ODP)Length: 2.1, 3.0mPack Size: 10 Lengths per packCavity Width: 50-100mmPreformed available Bespoke available
A versatile insulated closer for wider cavities. Suitable for first or second fix applications. Check reveal option also available.Accepts all window and door frame material. Insulation is zero rated for ozone depletion potential (ODP)Length: 2.1, 3.0mPack Size: 6 Lengths per packCavity Width: 110-160mmPreformed available Bespoke available
TFR1000 has a rigid PVCu profile containing a mineral wool insulation that forms a continuous fire rated insulated cavity closer around door and window openings. Suitable for first or second fix applications. Check reveal option also available.Length: 2.4m Pack Size: 10 Lengths per pack Cavity Width: 50-100mmFire Integrity: 60 mins Density: 140kg/m3
Preformed available Bespoke available
TFR2000
TFR2000 has a rigid PVCu profile containing a mineral wool insulation that forms a continuous fire rated insulated cavity closer around door and window openings. Suitable for first or second fix applications. Check reveal option also available.Length: 2.4mPack Size: 6 Lengths per packCavity Width: 110-160mmFire Integrity: 30 mins Density: 140kg/m3
Preformed available Bespoke available
Insulation & Ventilation 119
Fire Protection
Masonry Cavity Stop Sock 552
Acoustic Party Wall DPC557
Timber Frame Cavity Barrier 551
Linear Firestop Strip 553 & 554
Intended for installation between the outer brickwork and inner blockwork of masonry wall constructions. Provides up to 2 hours fire performance with a minimum of 1 hour. It can also be used to control flanking sound transmission at wall and floor junctions and complies with Approved Document E & Robust Details. It is installed as the outer brickwork and inner blockwork is built up.Manufactures in bespoke sizesSuitable for external cavities from 50-175mm.
Helps reduce flanking sound transmission at the junction of internal separating and external cavity walls and is protected by its integral DPC.The product consists of tissue faced rockfibre slab laminated to black polyethylene DPC. The DPC forms a 40mm flange on each side of the insulation and a 100mm flange at the bottom edge.Acoustic Party Wall DPC557 provides 60 minutes fire resistance to BS 476 Part 20:1987 and meets the requirements of 2003 Approved Document E (Sound Resistance) and Robust Details Part E.Suitable for external cavities from 50-150mmProduct Size: 260mm wide (insulation) x external cavity size x 1200mm.
Intended for installation between the outer brickwork and inner timber sheathing of timber frame constructions. Provides up to 2 hours fire performance with a minimum of 1 hour. It can also be used to control flanking sound transmission at wall and floor junctions.Manufactures in bespoke sizes.Suitable for external cavities from 50-175mm.
Rectangular strips of non-combustible rockfibre to provide up to four hours firestopping at the junctions of compartment walls and floors. Available in compressible and non-compressible types depending on the construction and fire resistance required (fire tested to BS 476 Part 20: 1987).Firestop Strips are manufactured to order for voids of 10-100mm and the maximum void size that can be filled is 50% of the wall width.When ordering Firestop Strips the following information is required: Wall width. Actual void size. Total linear metres. Required fire rating
Insulation & Ventilation120
Fire Resistance Thickness of Fire Barrier60 minutes 75mm – up to 300mm cavity
100mm-301mm to 600mm cavity120 minutes 100mm with lap joints240 minutes 100mm EHD* with lap joints*EHD = Extra high density barrier
Wall Cavity Fire Barrier
Fire Stop Strip Fire Stop Block
Cavity Fire Closer
AIM Wall Cavity Fire Barrier is a high density foil-faced rockfibre slab intended for installation within masonry wall applications and is capable of providing up to 4 hours fire performance within cavities up to 600mm in overall width. The barrier is available in either full slabs to be cut on site or in a pre-manufactured section to suit the desired cavity width. It is necessary to install the barrier under 5% compression while utilising additional fixing clips.
AIM Fire Stop Strip is a high density mineral fibre strip which provides a fire and acoustic barrier when positioned within linear voids in masonry wall applications. Fire Stop Strip is held in position under 5% compression and will accommodate voids up to 100mm in overall depth. The product is manufactured to suit the overall void and will achieve up to 4 hours fire performance. Fire Stop Strip is commonly located at the top of masonry wall locations and vertically within joints within the masonry skin.Voids: 10-100mm Length: 1200mm
AIM Fire Stop Blocks are mineral fibre based infill blocks which are commonly located within trapezoidal profiles to the top of masonry walls. Fire Stop Blocks are manufactured to suit the specified trapezoidal profile and are held in place under compression. The length of the block varies according to the fire rating and profile design, however, to simplify your requirements please confirm the profile design and required fire rating at time of order.
AIM Cavity Fire Closer is a rockfibre section bonded to a DPC layer which is intended for installation at blockwork return reveals within masonry wall applications. Cavity Fire Closer complies with Part E of the Building Regulations and has been independently tested and assessed by Exova Warringtonfire to provide up to 60 minutes fire performance. The product is located at blockwork reveal locations and reduces cold bridging while also acting as an acoustic barrier.
Insulation & Ventilation 121
Ventilation
Horizontal Front Extension Sleeve
Weep Vent / Concealed Weep
Vertical Extension Sleeve
Airbrick
Telescopic Underfloor Vent (Upper Half )
Vertical Extension Sleeve
Horizontal Rear Extension Sleeve
Telescopic Underfloor Vent (Lower Half )
Insulation & Ventilation122
Telescopic Underfloor Ventilator
AirbrickHorizontal Front Extension Sleeve
Cavity Sleeves
Vertical Extension Sleeve
Horizontal Rear Extension Sleeve
This is designed to provide ventilation below suspended ground floors. The ventilator is telescopic and can be adjusted vertically between 3 and 5 brick courses.
This is used in conjunction with the telescopic underfloor ventilator for providing ventilation below suspended ground floors and used with cavity sleeves for providing ventilation through external walls to a building interior. The airbricks can be clipped together to form a 9” x 6” or 9” x 9” airbrick.Available in Buff, Terracotta, Grey, Brown, Black & White.
This fits between the airbrick and upper front opening of the telescopic underfloor ventilator to accommodate external walls of more than 102.5mm thickness up to 215mm.
This is used to provide ventilation through the external walls to the interior of a building. The product can accommodate 9” x 3”, 9” x 6” & 9” x 9” airbricks.
The extension sleeve allows the ventilator to be extended vertically by a further 2 brick courses.
This fits on the lower rear opening of the telescopic underfloor ventilator to accommodate cavity widths between 50-150mm – or internal walls of more than 100mm thickness, up to a maximum of 200mm.
Insulation & Ventilation 123
Dual WeepWeep Vent/Concealed Weep
Designed to provide ventilation for a cavity wall and drain lintels and cavity trays.This unique, multipurpose product works as a weep vent and also a concealed weep meaning less has to be stored on site.
This is used to drain lintels, cavity trays and to ventilate cavity walls. The Weep Vent is intended for use with standard brick, block or stone external walls of thickness between 100-102.5mm. The Weep Vent is available in Buff, Terracotta, Grey, Brown, Black, White or Clear. The Concealed Weep provides a discrete, hidden solution to cavity wall drainage requirements. The Concealed Weep is available in Buff, Terracotta, Grey, Brown, Black, Clear or White (50 per box).
Brands we sell
Concrete Repair & Protection124124 Concrete Repair & ProtectionAs distributors for the largest manufacturers in the concrete repair market, SIG Construction Accessories can offer the solution to all your repair problems. From large scale renovations and structures, to restoring kerbs and joint rises, SIG Construction Accessories will have a product or system to do the job.Our range includes:• Primers & steel protection• Cementitious repair mortars• Resin repair mortars• Crack injection and stitching materials• Fast setting pavement repairs• Decorative coatings• Anti-carbonation coatings• Concrete Densifiers and Surface Treatment • Concrete Repair System
Products Page
Primers 125
Repair MortarsCementitious Repair Mortars 127Resin Repair Mortars 135
Fairing Coats 136
Protective Coatings Anti-Carbonation Coatings 137 Concrete Floor and Wall Refurbishment 139
Specialists Crack Injection 141Admixtures and Adhesives 142
Coverage Tables 144
Concrete Repair & Protection 125
Primers
Single component, cement based, multi-use, bonding and active protective primer Emaco® Nanocrete AP active primer, not only reinstates a high pH environment it also contains active corrosion inhibiting additives for the protection of reinforcement steel. It can also be used as an adhesive bonding slurry for subsequent repair mortars.Sizes: 5, 15 Litres
Emaco® Nanocrete AP
Curing membrane for Renderoc system and primer for Renderoc S and Patchroc GP.Sizes: 5, 25 Litres
A single-component polymer modified cementitious bonding bridge and steel reinforcement primer.Size: 25kg
A single-component polymer-modified, cementitious bonding aid. It requires only the addition of clean water to produce a bonding slurry for weber.cem HB30, weber.cem HB40 and weber.cem lightweight mortars.Size: 20kg
Concrete bonding agent, used as primer for Renderoc HB, HB25, HB40 and GP.Sizes: 5, 25 Litres
Nitobond AR
MonoTop 610
Bondcoat
Nitobond HAR
Economic, polymer cement coating to passivate and protect steel reinforcement. Supplied with a convenient mixing kit. BBA certified and CE Marked in compliance with EN1504-7.Size: 5kg
Steel Reinforcement Protector 841
Concrete Repair & Protection126
Used for bonding old to new concrete. Also primer for Patchroc/Paveroc and Renderoc cementitious systems.Sizes: 2.5, 4.5kg
Suitable for priming concrete surfaces prior to the application of any of the Nitoflor SL2000/4000, TS/TF range of resin based floor toppings, Nitocote range of protective coatings or Nitomortar range of epoxy repair mortars.Sizes: 1, 4 Litres
Nitobond EP Standard Nitoprime 25
A reactive silane-siloxane treatment for use with Dekguard products.Size: 25 Litres
Primer specifically for use with Dekguard Elastic.Size: 25 Litres
An anti-rust coating for iron and steel. It is cold-applied by brush or roller and is used for the protection of structural steelwork, agricultural and construction plant, gates, railings, iron pipework and in-situ weldings. Galvafroid is grey in colour and can be used as a self-finish or as a durable anti-rust coating beneath selected top coats.Sizes: 400, 800, 1900ml
Stabilises and seals substrate prior to the application of Weber.cote smooth or Elastomeric.Size: 5 Litres
Dekguard Primer
Nitoprime DG
Galvafroid
weber.cote primer
A solvent-free epoxy resin coating with high chemical resistance. It is used to protect to concrete and steel structures in aggressive chemical immersion conditions. The material is particularly suitable for applications in process plants and sewage works.Size: 4 Litres
Nitocote EN901
Epoxy zinc primer used as anti-corrosion coating for exposed steel reinforcement in concrete repairs.Sizes: 800ml, 1.9 Litres
Nitoprime Zincrich Plus
Anti-corrosive coating for steel reinforcement prior to concrete repair. For protection against corrosion.Size: 20kg
SikaTop Armatec 110
Concrete Repair & Protection 127
Cementitious Mortars
Ideal for the rapid repair of internal concrete, screeds, renders and concrete steps, it can also be used to form ramps, fill cracks and make good around fittings and pipework.Classification:• Cosmetic • Internal• Floor • Part mixSize: 11kg
A slump free repair and patch mortar which can be used for both internal and external repairs to stair treads and risers. It is also ideal for infilling holes around fittings and for patch work on wall and floor areas.Classification:• Cosmetic • External• Internal • Floor• Part mixSize: 11kg
A 45 – Internal Repair Mortar A 46 – External & Internal Repair Mortar
Repair Mortars
A fast setting cost effective solution for smoothing rough or damaged concrete or cement/sand screeds and is suitable for internal and external applications prior to tiling. Use to level uneven surfaces, such as paths and patios.Classification:• Cosmetic • FloorSize: 25kg
K 301
Used in place of Portland Cement in cement/sand screeds, Ardex A 35 produces a floor screed that can be walked on after 3 hours and is dry enough to receive tiling after 24 hours regardless of thickness. After 1 day the compressive and tensile strengths of an Ardex A 35 screed exceed the acceptable minimum attained by a conventional screed after 28 days.Classification:• Fast setting • Floor• StructuralSize: 25kg
A 35
A blend incorporating ARDEX A35 cement and graded sands, for the production of rapid setting and ultra rapid drying floor screeds, and for large repairs to existing cement/sand screeds. After only one day, the compressive and tensile bending strength of an ARDEX A 35 Mix screed/repair exceeds the acceptable minimum attained by an ordinary cement screed after 28 days, and is also dry, irrespective of thickness.Classification:• Fast setting • Floor • StructuralSize: 25kg
A 35 Mix
Concrete Repair & Protection128
A specially formulated repair mortar.It provides a repair material for concrete slabs which reaches an adequate strength for trafficking, or other use, at a very early age. It is also suitable for use as a repair medium at low ambient temperatures. Used for thicknesses above 20mm only, for depths of 30mm and above up to 10kg of 10mm single sized coarse aggregate may be added.Classification:• Can be applied in cold • Floor• Fast setting • StructuralSize: 20kg
Emaco® T545
Universal, fast setting, polymer modified, fibre reinforced repair and levelling mortar Emaco® Nanocrete R2 is a universal, single component, polymer modified, fast setting, repair, reprofiling and levelling mortar.Classification:• Cosmetic • External• Internal • Fast Setting• Overhead • WallSize: 20kg
Emaco® Nanocrete R2
Lightweight, polymer modified, fibre reinforced, structural repair mortar Emaco® Nanocrete R3 is a single component, lightweight, polymer modified, high build structural repair mortar.Classification:• External • Internal• Overhead • WallSize: 20kg
Emaco® Nanocrete R3
Extra high-strength, shrinkage compensated, fibre reinforced, structural repair mortar Emaco® Nanocrete R4 is a single component, extra high-strength, high modulus, shrinkage compensated structural repair mortar that meets the requirements of the new European Norm EN1504 part 3 class R4.Classification:• External • Internal• Highway • Structural • WallSize: 20kg
Emaco® Nanocrete R4
Low density, high yield, shrinkage compensated, polymer modified cosmetic repair mortar for concrete, brick or stone. Single component cementitious formulation, no primer required, simply mixed with water and easily applied in single layers up to 100mm. Particularly suitable for vertical and overhead use.Classification:• Cosmetic • External• Internal • No primer required • Overhead • Part mixSize: 18kg
Heavy duty, high strength polymer modified mortar which is suited for durable structural repairs as well as heavily trafficked areas.No primer required, simply mix with water. High build, up to 80mm in a single layer even when used overhead.Classification:• External • Internal• Highway • Sprayable • Structural • No primer required • Overhead • Part mix • WallSize: 25kg
Monolite Monomix HD
Concrete Repair & Protection 129
Medium density, multi-purpose structural grade polymer modified mortar.No primer required other than saturation of substrate. Simply mix with water and apply by hand or trowel to achieve 80mm build even overhead. Special spray grade available.Classification:• External • Internal• No primer required • Wall• Overhead • Part mix • Structural • Water DWI/WRAS Size: 25kg
Monomix
Ultra high strength, rapid curing, single component, polymer modified, Portland cement based mortar giving fast return to service. Shrinkage compensated and fibre reinforced for use in heavy wear applications including industrial floors, runways, roadways and footpaths as well as areas subject to early immersion. No primer required, simply mix with water. Used from 5mm or up to 300mm when bulked out with aggregate for filling of large voids or for bedding applications.Classification:• External • Internal• No primer required • Wall• Highway • Part mix • Structural • Water DWI/WRAS Size: 25kg
Fastfill
Single component lightweight fibre and polymer modified concrete reinstatement mortar for high build applications. Renderoc HB can be applied up to 80mm thick in vertical and 50mm in overhead work without the use of formwork. Thicker sections can be achieved by use of formwork or built up in layers. Thickness range 10-50mm.Classification:• Cosmetic • External• Internal • Floor• Overhead • WallSize: 18kg
Renderoc HB
High performance fibre reinforced medium weight concrete reinstatement mortar. For the reinstatement of reinforced concrete where low permeability characteristics are required and where higher compressive strength is a consideration. Renderoc HB45 has been specifically developed for the repair of columns and beams, but because of its medium fresh wet density, is also suitable for soffit repairs.Classification:• External • Internal• Floor • Highway• Structural • WallSize: 25kg
Renderoc HB45
Concrete Repair & Protection130
General purpose concrete reinstatement mortar which can also be used as a render as well as all types of patch repairs. It can be applied up to 20mm thick in overhead and 30mm in vertical sections. In horizontal applications 100mm thickness can be obtained.Classification:• Cosmetic • External• Internal • Overhead• WallSize: 25kg
Renderoc GP
Specifically engineered for vertical and overhead repair work. It can be applied in sections up to 60mm thickness in vertical locations and up to 40mm thickness in overhead locations in a single application and without the use of formwork. Deep pockets can sometimes be filled in a single application dependent on the configuration of the pocket and the volume of exposed reinforcing steel.Classification:• External • Internal• Overhead • Structural• WallSize: 22kg
Renderoc HB30
Structural grade polymer modified concrete reinstatement mortar. Used for repairs of large areas of concrete and for localised patch repairs. The application range is 5-10mm in vertical and 5-100mm in horizontal situations.Classification:• External • Internal• Overhead • Structural• WallSize: 25kg
Single component free-flowing low alkali micro-concrete. The product is highly fluid and obviates the need for compaction and vibration where access is restricted or reinforcement congested. Renderoc LA is ideal for the reinstatement of large structural sections of concrete.Classification:• External • Internal• Floor • Overhead• Structural • WallSize: 25kg
Renderoc S
Renderoc LA
Low alkali, high performance micro-concrete for the reinstatement of large, structural sections of concrete. Renderoc LA55 is BBA accredited, cert no. 98/3461.Classification:• External • Floor• Highway • Internal• Overhead • Structural • WallSize: 25kg
Renderoc LA55
Polymer modified dry spray repair mortar.DS is designed for large area repairs such as bridges, tunnels, retaining walls, dams etc.Classification:• External • Highway• Internal • Overhead• Structural • Sprayable • WallSize: 25kg
Renderoc DS
Concrete Repair & Protection 131
Reinstatement Mortar for large area repairs of concrete pavements and floors to avoid the total replacement of bays. Can be used internally or externally in thicknesses between 12mm and 100mm in a single application. Primer for Paveroc is Nitobond EP.Classification:• External • Floor • Internal • StructuralSize: 25kg
Emergency fast setting repair mortar for concrete pavements and floors can accept traffic in 2hrs.For use at depths from 12mm to 100mm in a single application and a maximum bay size of 4m2. Needs priming with Nitobond AR for pedestrian traffic, and Nitobond EP for vehicular traffic.Classification:• External • Floor• StructuralSize: 25kg
Paveroc
Patchroc GP
Cementitious mortar for re-profiling concrete structures. It can be used either to produce a fair-faced finish in preparation for a protective coating (see Dekguard range) or as a protective mortar layer. Renderoc RP252 can also be used to render large sections of concrete. Renderoc RP252 is BBA accredited, cert no. 98/3461.Classification:• External • Internal• Overhead • Structural• WallSizes: 3.4 Litre & 20kg bag
Renderoc RP252
A pre-packed mortar used for repairing concrete on vertical and overhead surfaces where ease of application is as important as high strength. It can be applied in relatively thick section to walls and soffits and depending on the nature of the repair, in layers up to 75mm deep in pocket repairs.Size: 18kg
A high strength pre-packed polymer modified mortar for bedding brick slips and bonding copings and other building components to concrete and suitable building surfaces. It is strong, durable and resistant to water and frost attack.Size: 25kg
A pre-packed high build, high strength concrete repair mortar for repairing concrete and protecting reinforcing steel.It is used to repair concrete on vertical surfaces and is particularly suited to the repair of overhead concrete where ease of application is as important as high strength. It can be applied in thick-section layers up to 75mm on walls and soffits, without shuttering.Size: 18kg
RonaBond HB40
RonaBond HB25 Ronafix Pre-packed Bedding Mortar
Concrete Repair & Protection132
A cement-based, one-component low-permeability repair microconcrete, containing silica fume and polymer, thickness range 5-30mm.Classification:• External • Internal• Structural • Sprayable• WallSize: 25kg
A one-component cement based polymer modified high-build repair and re-profiling mortar, thickness range 3-30mm.Classification:• External • Internal• Structural • WallSize: 25kg
A one-component, Fast setting, cementitious repair mortar.Size: 25kg
Sika MonoTop 612
Sika Rapid Repair Mortar
Sika MonoTop 615
Specifically formulated repair mortar, based on magnesia-phosphate cement pre-mixed with selected aggregates, which gives controlled, extremely high early strengths in temperature ranging from -20°C (or lower) up to over 30°C. Febset 45 can be modified with 10mm aggregate for use in depths over 150mm. It is also suitable for use as a repair medium at low ambient temperatures.Classification:• Can be applied in cold • External • Fast Setting • Internal • StructuralSize: 25kg
Febset 45
A general purpose pre-packed concrete repair mortar for repairing concrete and protecting reinforcing steel. Suitable for structural repairs and is waterproof, frost proof and very durable.Size: 25kg
RonaBond Concrete Repair Mortar
Concrete Repair & Protection 133
Single-component, polymer-modified high build mortars for replacing defective concrete with 40N/mm2 compressive strength, thickness range up to 100mm vertically and 75mm on soffits.Classification:• External • Internal• Structural • WallSize: 20kg
A polymer-modified cementitious mortar mix, with specially selected lightweight fillers. It is pre-blended, contains a polymer powder and simply requires the addition of clean water to produce a mortar suitable for both soffit and vertical repairs in situations where high-build replacement with conventional concrete is impractical. High-build up to 75mm in soffit patch repairs, without formwork.Classification:• External • Internal • Overhead • Structural • WallSize: 25kg
Single-component, polymer-modified high build mortars for replacing defective concrete with 30N/mm2 compressive strength, thickness range up to 100mm vertically and 75mm on soffits.Classification:• External • Internal• Structural • WallSize: 20kg
weber.cem HB40
weber.cem Lightweight weber.cem HB30
Is a pre-packed product based on hydraulic cements with specially graded non-reactive aggregates. The product is polymer-modified which when mixed with clean water produces a fast setting repair concrete, suitable for patch or full depth repairs up to 2m2.Classification:• External • Floor• Fast Setting • Internal • StructuralSize: 25kg
weber.cem Pyrapatch
A pre-blended cementitious repair concrete which fully complies with the Highways Agency Specification for Highway Works and Department of Transport specification BD 27/86 for a high strength flowing concrete. Also available with cathodic protection.Classification:• External • Floor• Highway • Internal• Overhead • Structural • WallSize: 25kg
weber.cem Five Star Repair Concrete
Concrete Repair & Protection134
A rapid-strength gain repair concrete for thin bond pavement repairs, which is a pre-packed hydraulic cement-based product with specially graded aggregates. It exhibits high early strength, is dimensionally stable and has excellent abrasion resistance.Classification:• External • Floor• Fast Setting • Internal • StructuralSize: 25kg
A cementitious product containing a blend of special cements and graded aggregates, which when mixed with water produce fast-setting bedding mortars for the rapid installation of ironwork and highway furniture. They can be applied to depth of 10–100mm in one pass and the rapid strength development characteristics allow the road to be opened to traffic 60 minutes after placement, dependent on the grade of product selected.Classification:• External • Floor• Fast Setting • Internal • StructuralSize: 25kg
weber.cem Pyratop weber.cem Pyrabed
A ready-to-use, polymer-modified, cement-based concrete mix. It contains inert limestone aggregates and dust suppressants. The formulation has been designed specially for dry process spray application to give high early strength, reduced rebound and maximise application thickness.Classification:• External • Highway• Internal • Overhead • Sprayable • Structural• Wall Size: 25kg
weber.cem Spray DS
Concrete Repair & Protection 135
Multi-purpose, rapid setting polyester mortar for precast units and universal repair, particularly kerbs. Nitomortar PE is the standard material for general purpose use and Nitomortar PE Concrete is a special grade allowing users to add suitable aggregate, thereby substantially reducing the cost of infilling larger voids. Both grades are chemical resistant.Classification:• External • Floor • Internal • Overhead • Part mix • Structural• WallSizes: PE 14kg, PE Concrete 11kg
Nitomortar PE and PE Concrete
Lightweight chemical resistant epoxy mortar for vertical and overhead applications, thickness range 10-50mm.Classification:• External • Internal • Overhead • StructuralSizes: 2.9, 9.3kg
High strength, chemical resistant epoxy mortar, ideal for industrial floors, tanks and sea walls, thickness range 5-50mm.Classification:• External • Floor • Internal • Structural • WallSizes: 5, 16kg
Nitomortar HB Nitomortar S
Resin Repair Mortars
Trowel applied epoxy patching mortar in concrete grey colour. For heavy duty repairs in damaged and defective areas in concrete, mortar, screeds, bridge bearings, etc.Classification:• External • Floor • Internal • Overhead • Part mix • Structural• WallSize: 10kg
Sikadur 41CF
Very low viscosity clear crack injection non-shrink, solvent-free epoxy, for repair by pouring or injection into cracks in concrete, also for stabilising lifted screeds. Classification:• External • Floor • Internal • Part mix • StructuralSize: 1kg
Sikadur 52
A two-component, polyester-based mortar for the bedding and fixing of manhole frames, airport landing lights, duct frames and precast concrete units. It has been formulated for easy mixing and placement, even at low temperatures, and when cured, provides a durable, chemically resistant bedding and fixing material with good bond strength.Classification:• External • Floor • Fast Setting • Internal • Part mix • StructuralSize: 1 resin and 1 hardener, 25kg
Bedding Mortar
Concrete Repair & Protection136
A three-component bulk pack or as a two component handy pack, consisting of epoxy resin, hardener and selected graded aggregates (filler) which when mixed produce a high strength, impermeable and chemically resistant mortar.Classification:• External • Floor • Internal • Part mix • Structural • WallSize: 26kg
weber.tec EP Mortar
A three-component bulk pack or as a two-component handy pack, consisting of polyester resin, hardener and selected graded aggregates (filler) which when mixed produce a high strength, impermeable and chemically resistant mortar.Classification:• External • Floor • Internal • StructuralSize: 25kg
weber.tec Mortar
Fairing Coats
Single component, polymer modified mortars for rendering and reprofiling of in-situ and pre-cast concrete and brickwork to produce a high quality, decorative engineering finish. Mixed with water on-site and applied by spray, trowel or bag rubbing techniques. Uses include fairing coats to fill minor voids and defects on new and existing structures, waterproofing of basements and water tanks including drinking water structures and waterproof external rendering of brick and blockwork.Classification:• Cosmetic • External • Highway • Internal• No primer required • Overhead • Part mix • Sprayable • WallSize: 25kg
Monolevel FC
Cementitious fairing coat for filling blowholes prior to coating. It is designed for vertical and overhead use to infill honeycombing and voids up to 3mm deep in the surface of concrete. Renderoc FC must be overcoated. Renderoc FC is BBA accreditied, cert no. 98/3461.Classification:• Cosmetic • External • Internal • Overhead • WallSize: 25kg
Renderoc FC
A single-component, polymer-modified levelling mortar used to prevent ghosting of concrete repairs through decorative finishes.Classification:• Cosmetic • External • Internal • Overhead • WallSize: 25kg
weber.cem Fairing Coat
Epoxy fairing coat for filling blowholes and surface preparation. Chemical resistant.Classification:• Cosmetic • External • Internal • Overhead • WallSize: 1kg
Nitomortar FC
A one-component cementitious polymer modified mortar, thickness range 1.5-5mm.Classification:• External • Internal • Overhead • Sprayable • WallSize: 25kg
Sika MonoTop 620
Concrete Repair & Protection 137
Crack-accommodating elastomeric protective coating for reinforced concrete structures.The Dekguard E2000 system comprises a single component penetrating primer and a single component elastomeric pigmented coating, both ready for immediate site use.Size: 10 Litres
Protective Coatings
Technically advanced, low VOC, weatherproof anti-carbonation coatings which are independently tested to confirm equivalent protection to an extra 500mm of concrete cover. Applied over Bond-Prime in two coats, Monodex Ultra has a 10 year design life with Monodex Smooth extending to 15 years. Available in an attractive range of colours to produce a durable, decorative finish which is equally suited for repaired structures or in new construction.Size: 15 Litres
Monodex Range
Anti-Carbonation Coatings
Water-based coloured coating protects exposed reinforced concrete structures, cementitious substrates and masonry from aggressive elements, weathering and rain.It is suitable for use on all types of structures, including those in coastal environments.Available in a wide range of colours.Size: 10 Litres
A water-based coloured elastomeric coating for exposed concrete and masonry. It provides excellent elongation and recovery, low dirt pickup, resistance to aggressive elements, UV light and rain. Available in a wide range of colours.Size: 10 Litres
A high performance coating for exposed concrete and masonry that provides outstanding resistance to aggressive elements, UV light and rain. Available in a wide range of colours.Size: 10 Litres
Dekguard W
Dekguard ElasticDekguard S
Dekguard E2000
A one-part, plasto-elastic water dispersed coating based on a styrene acrylate dispersion for the protection and enhancement of fair faced concrete.Size: 15 Litres
A one-part, elastomeric coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0°C.Size: 15 Litres
SikaGard ElastoColour 675 W
SikaGard 550 W Elastic
Concrete Repair & Protection138
Damp-tolerant protective coating for concrete and mild steel. The cured film is corrosion, chemical and abrasion resistant and is suitable for application to sewage works, marine environments, basements and tunnels.Size: 2.5kg
Nitocote EP403
A textured weather-resistant coating for exposed concrete and masonry.It provides low dirt pick-up, resistance to aggressive elements, UV light and rain. Available in a wide range of colours.Size: 10 Litres
Dekguard Textured
A one-part water repellent impregnation for absorbent cementitious substrates. It penetrates well into the open pores of the substrate, providing a durable water repellency, while still allowing water vapour diffusion in both directions.Size: 20 Litres
SikaGard 700 S
Colourless material drying to a glossy coat, suitable as refresher and protective coating for exposed aggregate concrete.Size: 20kg
SikaGard 680 S Clear Glaze
A one-part solvent containing coating, based on methacrylic resins resistant to weathering, alkalis and ageing. Protects concrete against aggressive atmospheric influences and promotes a self-cleaning effect on the treated surfaces. It does not adversely influence the characteristic texture of the concrete.Size: 30kg
SikaGard 680 S Cosmetic
External decorative anti-carbonation coating in a smooth finish.Size: 15 Litres
weber.cote Smooth
Elastomeric flexible anti-carbonation coating for concrete.Size: 15 Litres
weber.cote EC
Concrete Repair & Protection 139
A solvent-free epoxy resin coating used for lining and waterproofing potable water retaining structures and surfaces subject to contact with foodstuffs. The cured film is corrosion, chemical and abrasion resistant and is suitable for application to tanks, silos, reservoirs, water treatment works, breweries, dairies and meat and food processing plants. Available in two colours, blue and white.Size: 2.5kg
Nitocote EP405
A high performance silane-siloxane treatment for concrete and masonry. It is used to protect concrete structures from attack by chloride ions and water. Suitable for all types of structures, including those in coastal areas.Sizes: 25, 200 Litres
Nitocote SN502
Concrete Floor and Wall Refurbishment
A water-based, clear, dissipating membrane-forming curing compound, hardener and densifier that surpasses ASTM C-309 Liquid Membrane – Forming Compounds for Curing Concrete moisture retention requirements. Excellent for commercial and industrial concrete floors that need long-term protection against heavy wear and abuse, moisture, dirt and grime buildup.Sizes: 25, 200 Litres
Pentra-Sil® (NL) HD+C
A solvent free, two-part epoxy resin coating ideal for bund areas.Size: 10kg
SikaGard 63N
A surface applied migratory corrosion inhibitor, designed for use in impregnation of steel reinforced concrete.Size: 25kg
Sika FerroGard 903
A two-component solvent free, high-build coloured epoxy resin coating with high chemical resistance and approved for use in contact with potable water.Size: 5kg
SikaGard 62
Concrete Repair & Protection140
A two-component, SBR Latex-modified, flexible cementitious coating for brush, spray or roller application. It is formulated as a protective, levelling coating to cover non-structural surface defects in new and old concrete.Size: 20kg (15kg bag powder, 5 litre bottle of SBR latex)
weber.cem Brushcoat
A clear surface-applied corrosion inhibitor designed to migrate through reinforced concrete and preserve steel reinforcing bars embedded in concrete. It forms a mono-molecular protective layer around the steel within a week of treatment depending on the permeability and moisture content of the concrete.Size: 20 Litres
weber.tec Guard MCI
A protector that effectively shields a surface from all forms of chemical attack. Additionally, it inhibits the adhesion of chewing gum.Solvent FreeSizes: 5, 25 Litres
Lisotop Floor Protector
Easily removes all residue of saltpetre and allows the surface to be protected by one of the Lisotop products. High performance treatment created to clean and restore the natural aspect of masonry.Solvent FreeSizes: 5, 25 Litres
Lisoclean E
A cleaner to disinfect areas with growth of algae, bacteria and fungi, and can be used on most washable surfaces. Mineral surfaces of application include: roof tiles, facades, masonry, pavement, and natural materials.Solvent FreeSizes: 5, 25 Litres
Lisoclean MF Moss and Fungi Eradicator
A high performance water-based Silane-Siloxane Fluorinated polymer designed to give superior oil and water repellence with anti-graffiti properties to all interior and exterior concrete and masonry surfaces (i.e. bricks, natural stone, etc).Solvent FreeSizes: 5, 25 Litres
LisoTop OWR™ Anti Graffiti Coating
A liquid agent specifically designed to remove graffiti from concrete and masonry surfaces. When used with Lisotop Anti-Graffiti coating, the removal of graffiti leaves no aesthetic evidence. The treatment will also remove chewing gum from floors treated with Lisotop Floor Protector.Solvent FreeSizes: 5, 25 Litres
Lisoclean Gum and Graffiti Remover
A high performance product dedicated to concrete & alkali surfaces. This water based formula provides a durable transparent protection against water, oil, grease, etc.Solvent FreeSizes: 5, 25 Litres
LisoTop C™ Surface Protection
Concrete Repair & Protection 141
A weber.tec acrylic sealer is a low-viscosity, colourless, penetrating sealer. The concept is to achieve an in-surface seal with no material build-up.For severely exposed surfaces, one coat of weber.tec aquapel WR prior to two coats of weber.tec acrylic sealer is recommended.Sizes: 5, 25, 200 Litres
weber.tec Acrylic Sealer
Pre-packaged, thixotropic epoxy crack injection resin, suitable for open-ended cracks where depth and quantity needs to be controlled.The Nitokit systems are ideal for small scale repairs on and are also suitable for the insitu or precast concrete elements.
Low viscosity epoxy resin injection grout for cracks between 0.25mm and 9mm where both sides of the crack can be sealed against resin drainage.Size: 3 Litres
Thixotropic epoxy resin injection grout for cracks between 0.5mm and 9mm where both sides of the crack cannot be completely sealed.Size: 1 Litre
Nitokit LV/TH
Nitofil LV Nitofil TH
Specialists
Crack Injection
Contents:• 12 cartridges – 0.25 litre
of mixed resin• 30 injection nipples• 6 hoses• 4 air release pins • 6 mixing rods**Supplied in Nitokit TH only
Accessories Pack Contents:• 1 injection gun• 1 plastic bucket• 10 pairs disposable gloves• 2 pairs goggles• 1 x 5 .5 litre pack Nitokit
Surface Sealant
A high performance water repellent treatment specifically used for protecting reinforced concrete roads and bridges. DTp specified and protects concrete from water and chloride ingress whilst still allowing it to breathe.Size: 25 Litres
Nitocote SN511
Concrete Repair & Protection142
Admixers and Adhesives
Bonding and waterproofing admixture to add to screeds, renders and repair mortar mixes.Sizes: 5, 25 Litres
SBR
Two-part epoxy thixotropic adhesive for bonding building materials. Fast setting and non-shrinking. For sticking brick slips, bedding tiles, wood etc. NWC/NRC certified for contact with potable water. Normal grade (N): for 5-30°C application, Rapid grade (R): for 0-15°C application.Sizes: 1.2, 6kg
Sikadur 33 is a two-component epoxy resin adhesive in a cartridge to fit normal skeleton gun.Size: 250ml
A winter working admixture for concrete. Sizes: 5, 25 Litres
Two-pack solvent free liquid epoxy bonding agent in 1 and 5 kilo packs. For bonding similar and dissimilar materials, e.g. concrete, metal, stone, glass, wood and asbestos.Size: 5kg
A solvent-free, moisture tolerant, thixotropic, structural two-part adhesive and repair mortar, based on epoxy resins and special sillers, designed for use at temperatures between +5°C and +20°C.Sizes: 1.2, 6kg
SikaDur 31 SikaDur 33
Wintermix
SikaDur 32
SikaDur 31 Rapid
Concrete Repair & Protection 143
Chloride free Sika Accelerator cold weather and rapid hardening admixture for mortars and concretes. Sizes: 5, 25 Litres
Accelerator
A two-component, bisphenol epoxy resin and polyamine hardener, highly moisture-tolerant structural adhesive for structural jointing and structural strengthening. Used for application thicknesses of 2-10mm.Size: 5kg
A high-build epoxy resin for priming epoxy repair mortars for bonding to concrete and masonry structures. Exceptional bond to vertical and soffit applications for priming lightweight repair mortars.Size: 5.6kg
weber.tec EP Structural Adhesive
weber.tec EP bonding aid
Concrete Repair & Protection144
Coverage Tables
Ardex
Type Size CoverageArdex A 45 11kg 7 litres per bagArdex A 46 11kg 8 litres per bagArdex PSRS 10kg two
component tin
Dependent on porosity and depth of the screed
Ardex K 301 25kg 1.6kg/m2/mm i.e. approx 7.8m2 @ 2mm thickness/25kg bag
Ardex A 35 25kg approx 2.3m2 per 25kg bag for 30mm 1:4 screed
Ardex A 35 Mix 25kg approx 1.85kg/m2/mmArdex Feather Finish 5kg 4.5m2 @ 1mm thick, 22.5m2
as a scratch coat
Type Size Yield CoverageAnti-Carbonation CoatingsMonodex Ultra 15L 15 litres 37.5m2 per packMonodex Smooth 15L 15 litres 37.5m2 per packAll single component Flexcrete mortars require only the addition of clean water. Packs can be split on site for mixing by volume for economic use.
Flexcrete
Repair MortarsType Size Yield CoverageSteel Reinforcement Protector 841
5kg 2.8 litres 45 linear metres of 10mm bar
Monolite 18kg 16.7 litres 1.67m2 @ 10mm thickness
Monomix 25kg 16.5 litres 1.65m2 @ 10mm thickness
Monomix HD 25kg 13.1 litres 1.31m2 @ 10mm thickness
Fastfill 25kg 13.3 litres 1.33m2 @ 10mm thickness
BASF
Type Size CoverageEmaco Nanocrete R2
20kg 20kg – 1.3 m2@10mm thick
Emaco Nanocrete R3
20kg 20kg – 1.4 m2@10mm thick
Emaco Nanocrete R4
20kg 2kg – per m2/per mm thick
Emaco Nanocrete AP
5, 15 litres
Consumption: 2-3 kg/m2
Concrete Repair & Protection 145
Type Size Coverage Dekguard W 10 litres 2.75m2/litreDekguard S 10 litres 3m2/litreDekguard Elastic 10 litres 1.25m2/litreDekguard Textured 10 litres 2m2/litreDekguard E2000 10 litres 2.5m2/litreDekguard Primer 25 litres 2.5m2/litreNitoprime DG 25 litres 2.5m2/litre
Fosroc
Fosroc NitomortarType Size Coverage Nitomortar HB 2.9, 9.3kg 2.5, 8 litresNitomortar S 5, 16kg 2.5, 8 litresNitomortar FC 1kg 0.6 litres Nitomortar PE 14kg 7.5 litres Nitomortar PE Concrete
11kg 15 to 27.5 litres
Nitroprime 25 1 litre, 4 litres 5.5 – 6.5m2/ltrFosroc NitocoteType Size CoverageNitocote EP403 2.5kg packs
(1.5 litres)3m2 per kg per coat (5m2 per litre)
Nitocote EP405 2.5kg packs (1.5 litres)
3m2 per kg per coat (5m2 per litre)
Nitocote EN901 4 litres 10m2
Nitocote SN502 25, 200 litres 5m2 per litre per coatNitocote SN511 25 litres 0.3 litres/m2 per coat
(minimum)Fosroc Primers and Bonding AgentsType Size CoverageNitobond AR 5, 25 litre
drums4-6m2/litre*
Nitobond HAR 5, 25 litre drums
4-6m2/litre*
Nitobond SBR 5, 25, 210 litre drums
Nitobond EP Standard 2.5, 4.5kg packs
5m2, 10m2
Nitoprime Zincrich Plus
800ml, 1.9 litre
7.4m2 per litre
*HAR/AR as primers, usage varies in other applications.
Fosroc PaverocType Size Coverage Paveroc 25kg 0.9m2 @ 12mm
thicknessFosroc Patchroc GPType Size Coverage Patchroc GP 25kg 1m2 @ 12mm
thicknessFosroc RenderocType Size Coverage (Approx)Renderoc GP 25kg bag 1.6m2 @ 10mm
thicknessRenderoc HB 18kg bag 1.5m2 @ 10mm
thicknessRenderoc S 25kg bag 1.2m2 @ 10mm
thicknessRenderoc LA 25kg bag 12 litres/25kg bagRenderoc LA55 25kg bag 12 litres/25kg bagRenderoc DS 25kg bag 2m2 @ 10mm
thicknessRenderoc HB30 22kg bag 1.5m2 @ 10mm
thicknessRenderoc HB45 25kg bag 1.4m2 @ 10mm
thicknessRenderoc RP252 Kit 3.4 litre liquid
+ 20kg bag2.4m2 @ 5mm thickness
Renderoc FC 25kg bag 5m2 @ 3mm thick-ness
Renderoc MB50 25kg bag 1.4m2 @ 10mm thickness
Renderoc Primer 4kg Part A, 1 litre Part B 20kg Part A, 5 litre Part B
2.5 litres – 5m2 13 litres – 26m2
Concrete Repair & Protection146
Sika
Type Size CoverageSika FerroGard 903Sika FerroGard 903 25kg 0.5kg/m2
SikaGardSikaGard 62 5kg Approximately 0.2 –
0.4kg/m2
SikaGard 63N 10kg 0.3 – 1kg/m2 per coat, dependent on substrate condition and required coating thickness
SikaGard 700 SSikaGard 550 W Elastic
15 litres 0.25 – 0.35kg/m2 per coat
SikaGard ElastoColor 675 W
15 litres 0.2 – 0.25kg/m2 per coat
SikaGard 680 S Clear Glaze
20 litres 0.15kg/m2
SikaGard 680 S Cosmetic
30 litres 0.2kg/m2
SikaGard 700 S 20 litres 0.25 litre/m2
weber.cem brushcoat
20kg plastic bucket; 15kg bag of powder (Component A) 5 litre bottle of SBR Latex (Component B)
A + B prduces a yield of 10.8 litres, sufficient to cover 10m2 per 1mm coat
Sika Repair MortarType Size CoverageSika Monotop 610 25kg 1.5 - 2kg/m2/coatSika Monotop 612 25kg 2.11kg/m2/mmSika Monotop 615 25kg 1.65kg/m2/mmSika Monotop 620 25kg 2kg/m2/mmSikatop Armatec 110 20kg 2kg/m2/coatSikatop 121 10, 25kg 2kg/m2 per mm
thickness
Sika Epoxy Mortars and Crack RepairType Size CoverageSikadur 41CF Normal Grade
10kg 2kg/m2 per mm thickness
Sikadur 52 1kg 1.1kg/m2 per mm thickness
Sika AdhesivesType Size CoverageSikadur 31 Normal Grade
1.2kg, 6kg 1.65kg/m2/mm
Sikadur 31 GB Rapid 1.2kg, 6kg 1.65kg/m2/mmSikadur 32 5kg 0.7kg/m2 @ 0.5mm
thicknessSikadur 33 250ml
Ronacrete
Type Size CoverageRonaBond Concrete Cover 150
19kg 7.6kg per m² for 2 coats
RonaBond pre-packed concrete repair mortar
25kg Yield – 90 packs per m³
RonaBond HB40 13 litres 1m²@13mmRonaBond Lightweight Repair Mortar
18kg 1m²@15.5mm
RonaBond Concrete Repair Mortar
25kg 1m²@11mm
RonaBond Easy Skim FC 25kg 6.5m²@2mmRonacrete Standard Primer
2kg, 10kg 2kg 3-4m² per coat/10kg 15-20m² per coat
Ronafix Pre-packed Bedding Mortar
25kg -
Ronacrete Standard Primer
2, 10kg 2kg 3-4m2 per coat/10kg 15-20m2 per coat
Concrete Repair & Protection 147
Weber
Type Size Coverage/Yieldweber.cem Bondcoat 20kg 16.5 litres per 20kg
bagweber.cem Mortar 25kg 1m2 @ 12mm thick –
12 litresweber.cem Light-weight
20kg 1m2 @ 16mm thick – 16 litres
weber.cem HB30 and HB40
20kg 16 litres per 20kg bag or 6.5m2 per bag at 2mm thickness
weber.cem Fairing Coat
25kg 13 litres per 25kg or 6.5m2 per bag at 2m thickness
weber.cem Spray DS 25kg approximately 11.5 litres per 25kg bag, allowance must be made for rebound and profiling
weber.tec Bedding Mortar
25kg 12 litres per 25kg pack
weber.cem Pyrapatch 25kg approximately 12 litres
weber.cem Pyratop 25kg approximately 12 litres
weber.cem Pyrabed 25kg 12.75 litres per 25kg bag
Five Star Repair Concrete
25kg 12.75 litres
weber.tec EP Structur-al Adhesive
5 kg 2.9 litres coverage
-
weber.cem Brushcoat 20kg Bucket, 15kg Bag plus 5 litre bottle
10.8 litres per 20kg
weber.tec EP bonding aid
5.6kg 1.2m2 – 2.5m2/kg
Weber Resin Repair MortarsType Size/
ContentsCoverage
weber.tec EP Mortar 26kg approx 12.5 litresweber.tec Mortar 25kg approx 12.5 litres
weber.cote PrimerType Size Coverageweber.tec Guard MCI 20 litres 0.25 litre/m2
weber.cote smooth 15 litres 3 – 6m2/litre in 2 coatsweber.cote EC 15 litres 1 – 2m2/litre in 2 coatsweber.cote primer 5 litres 10 – 12m2/litre
Sealants, Joint Fillers and Construction Chemicals148148 Sealants, Joint Fillers and Construction ChemicalsAdhesives & SealantsFrom low tech gap filling mastics to hyperlon strips we have the sealants to do the job. Our range includes: • Low and high modulus silicone sealants• One and two-part polysulphides• Polyurethane & modified polyethers • Fire retardant and intumescents• Foams & fire foams• Hot pour bitumens for pavements• Cold applied sealants for pavements• Epoxy sealants for high chemical resistance• Bitumen rubber sealants and bituminous putty• Hypalon and butyl strips
Filler Boards and CorksTo complement our wide range of sealants we can we can supply filler materials for every purpose:• Closed cell polyethylene in sheets, strips and cords• Fibreboard in sheets and strips• Bitumen cork in sheets
Products Page
Sealant & Joint Fillers 149Fire Protection Products 155Formwork Chemicals Formwork 156Curing Agents 157Hardeners 159Dust Proof 160Sealers 160Accessories 161
Sealants, Joint Fillers and Construction Chemicals 149
Closed Cell Polyethylene SheetsSize Thickness1 x 2m 10, 12, 15, 20, 25mm
Closed Cell Polyethylene StripsWidth Thickness100, 125, 150, 175, 200, 225, 250, 275, 300mm 20, 25mmSupplied in 2m strips.
Closed Cell Polyethylene RollsWidth Thickness100, 150, 175, 200, 225, 250, 275, 300mm 10, 12, 15mmSupplied in 10m rolls.
Sealants & Joint Fillers
ALTIFILLER Exclusive to
Closed Cell Expanded polyethylene foam is supplied in roll, sheet or strip form. High performance expansion joint fillerboard, for concrete slab construction and brickwork joints, which is supplied with an undercut to the depth of sealant for controlled void formation and easy removal.
Sealants, Joint Fillers and Construction Chemicals150
Type Size ThicknessAerofil 1 0.8 x 2m (1.6m2) 5, 10, 15, 20, 25mmAerofil 2 0.8 x 2m (1.6m2) 10, 15, 20, 25, 50mm
Bitumen Impregnated StripsWidth Thickness100, 150, 175, 200mm 12, 20, 25mmStandard length 2440mm.
Bitumen Impregnated SheetsSheet Size Thickness1.22 x 2.44m = 2.98m2 12, 20, 25mm
Expanded thickness Length of roll(300kPa) (600kPa)
5mm 15m 15m9mm 10m 12.5m13mm 8m 10m17mm 5m 8m26mm 4.5m 5.6m35mm 4.5m 4.3m44mm 3m 3.3m53mm 3m 3m*Please note this product is supplied from factory where all thicknesses are available ex-stock except Vitaseal 600 17-53mm.
Compriband Super
Bitumen Impregnated Boards
TP600
Expanded polyurethane foam impregnated with waxes and neoprene to form a high quality, low cost and efficient strip sealant.
Bitumen Impregnated Boards are used as a general purpose expansion joint filler in non-critical joints and brick wall construction.
A soft and flexible open cell polyurethane foam, impregnated with an acrylic based, UV stabilised resin. The resin is water repellent, weather tight and contains a fire retardant. It is supplied as pre-compressed rolls with a self adhesive side to aid initial location. Various roll sizes and length options available.
Vitaseal Expanding Foam Tapes
Characteristics/Applications include:Responds continually to expansion and contraction cycles without failure for the duration of its life it forms a complete primary weather seal. Flexible for use on joints for portable or sectional buildings, side/end laps on roofing sheets, expansion joints, windows, doors and conservatories, gutter seals and ductwork.
Aerofil 1 A low compression natural white, inert, preformed, closed cell, polyethylene joint filler in sheet and strip form suitable for structural movement joints in concrete, brick and blockwork.Aerofil 2 A high density closed cell polyethylene filler for critical movement joints in civil/structural works and water retaining structures.
Aerofil®
Hot-poured rubber bitumen joint sealants. Nitoseal N2 is a low extension grade for sealing joints in concrete pavements, floor slabs, water retaining and water excluding structures.
Size: 15kg
Nitoseal 77 is a hard grade for sealing low movement joints in factory floors and areas where joints are closely spaced and resistance to grit and traffic is of prime importance.
Size: 15kg
Nitroseal N2
Nitoseal 77
Sealants, Joint Fillers and Construction Chemicals 151
A one-part, abrasion resistant floor joint sealant. It is used for sealing movement joints in factory floors, sports stadia terracing, shopping centres, warehouse and distribution depots and concrete hardstanding areas. MS300 is fast curing and is ideal for trafficked joints. Damp tolerant application. Available in grey only.
Size: 600ml Sachets
Size20 per box. 380ml cartridge.
A polyethylene sheet material used for forming or filling expansion joints in concrete, brickwork and blockwork. It gives excellent support to sealants subject to hydrostatic pressure. Hydrocell XL can easily be cut to size with a stanley knife or saw
Size: 1 x 2m
A one-part primerless non-staining facade sealant. It is used for sealing joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting. Available in white, grey, black, portland, buff and rustic red. Damp tolerant application.
A one-part general purpose building sealant. It is suitable for sealing joints in concrete brickwork, blockwork, perimeter sealing around doors and windows and for non-trafficked floor joints. Damp tolerant application.Available in white, grey, black, magnolia, buff, portland, rustic red, brown and anthracite.
Size: 600ml sachets/380ml cartridge
Hydrocell XL
Nitoseal MS100 Nitoseal MS60
A two-part, elastomeric joint sealant designed for use in the water industry. It is resistant to abrasion and bacterialogical attack making it ideal for ‘dirty’ water storage applications. Nitroseal PU12 accelerator also available
Size: 2 litre
Nitoseal MS300Nitoseal PU12
A one-part civil engineering sealant for immersed conditions. It is suitable for sealing movement joints that will be intermittently or permanently under water. MS600 is typically used in reservoirs, sewage tanks, non-tidal sea walls, basements, subways, parapets, bridges and superstructures. Damp tolerant application. Available in grey. Size: 600ml Sachets
A two-component epoxy urethane joint sealant. It is used for sealing internal joints where chemical resistance is required. Expoflex 800 is suitable for use in factories, warehouses and distribution centres, particularly where there is forklift truck traffic.Size: 2 Litres
Nitoseal MS600 Expoflex 800
Sealants, Joint Fillers and Construction Chemicals152
A flexible rubber-bitumen gun-applied joint sealant. It is used for sealing joints in flashings, guttering and sheet laps. Nitoseal is an integral part of the Proofex waterproofing system. Usage: 10 x 10mm joint requires 0.1 litre/metre.Size: 380ml
One-part, low-modulus silicone sealant suitable for sealing around uPVC windows and movement joints in concrete, brickwork and a variety of other substrates. Cures on exposure to air and humidity to form a flexible seal that requires no maintenance throughout its service life.Size: 380ml
A hand-applied flexible, bituminous putty used for sealing joints in ‘dirty’ water retaining structures. Plastijoint is particularly suitable for vertical and inclined joints. Plastijoint is not suitable for use in potable water retaining structures.Size: 5 Litres
Cold-applied, high performance, pitch free pavement joint sealant, for the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Application by pouring or bulk gun. Concrete joint faces should be primed with Fosroc Primer 20.
Size: 5 Litres
Nitoseal MB175 Hilastic
Plastijoint Colpor 200PF
Multi-component polysulphide sealant available in two grades.Gun Grade Produced for application in both vertical and horizontal situations. Available in grey, stone, off-white, black, mahogany, and brick red.Pouring Grade Only in grey for joints in floors or other horizontal surfaces.
Ancillaries available
Thioflex 600
Type SizeThioflex 600 gun grade 2.5 litre tin Thioflex 600 pouring grade 5 litre tin
One-part Polysulphide Sealant to ISO11600 F 12.5P.Applications: Brickwork, concrete, copings, perimeter sealing of windows, steel and marine/bedding.Cartridge Size: 380mlVarious Colours Available
Arbokol 1000
Sealants, Joint Fillers and Construction Chemicals 153
One-part polysulphide sealant to ISO11600 F 20HM.Applications: Cladding, brickwork, concrete, windows, steel and marine/bedding.
Cartridge Size: 380mlVarious Colours Available
One-part low-modulus polymer sealant to ISO11600 F 20LM.Applications: Lightweight cladding, blockwork and brickwork, curtain walling.Cartridge Size: 380mlVarious Colours Available
Arbokol AG1 Arbomeric MP10
A cold-applied, one-part polyurethane sealant developed that provides a durable, damage resistant surface sealant to protect steel reinforcement in concrete structures from corrosion. Suitable for factory floors, culverts, spillways and car park decks.Size: 310ml
A chemically curing, pitch free polyurethane sealant specially formulated to provide a durable seal in movement or construction joints in concrete subject to contamination by oil and fuel spillage. It can be used in concrete roads, hard standings, runways, petrol filling stations and industrial production areas.Size: 5 Litres
Servijoint One Servijoint Two
A two-part, cold-applied, gun grade polysulphide sealant for sealing vertical movement joints in buildings, and civil engineering structures.
Size: 2.5 Litres mixed volume
Vertiseal CE
A low-modulus, neutral curing silicone sealant based on a filled alkoxy-curing system. Used for expansion joints to stone, brick, concrete and composite panels, perimeter pointing around all types of windows and door frames. Substrates: Glass, aluminium and PVC – all primerless.Cartridge Size: 380mlVarious Colours Available
Silicone 825
High performonce, multi-purpose, gap filling adhesive.Gripfill™ is a solvent-borne, filled rubber resin adhesive, developed to bond virtually any rigid materials together, regardless of the evenness of the surface. Size: 310ml cartridges
Direct bond cartridge applied adhesive formulated specifically for professional use, using polymers at the leading edge of adhesive technology. Bonds to virtually all common building surfaces and is designed for both external and internal use.Size: 310ml cartridges
Gripfill Pinkgrip
Sealants, Joint Fillers and Construction Chemicals154
The Sikadur-Combiflex Jointing System consists of a Sika Hypalon Strip, a highly elastic, rot-proof and chemically resistant sealing sheet and Sikadur 31 DWI/Rapid an epoxy resin based and establishes a strong bond to the substrate. The system resists water pressure and can be used on wide joints without the need to remove any existing failed sealant. It is suitable for potable water and has high joint movement capacity.The hypalon strip is activated by the use of Sika Thinners C being wiped on both sides. Thinners C is also used to remove any uncured resin from tools, etc.
High performance one-part polyurethane joint sealant, available in a range of colours. Sealing expansion joints in all types of structures which are subject to movement.Sizes: 310ml, 600ml
One-part chemical resistant polyurethane sealant. The unique two stage cross linking process eliminates many of the problems associated with conventional single stage cross linking sealants.Size: 600ml
A one-part, gun grade dual purpose adhesive and sealing compound of permanent elasticity. Excellent adhesion to most building materials with a fast cure rate, high durability suitable for potable water contact.Sizes: 300cc, 600ml
A one-part general purpose polyurethane permanently elastic joint sealant for use in most construction joints.Size: 600ml
Sikaflex Pro 2HP
Sikaflex 1-Cure Pro Sikaflex 1-Cure 11FC
Sikaflex Construction 1-Cure
Sikaflex Tank N is a one-part, moisture curing, elastic joint sealant based on polyurethane. It is used in areas for the storage, filling and handling of water polluting liquids.Size: 600ml
A solvent-free, moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +5°C and +20°C.Size: 1.25kg/6kg (both parts)
Sikaflex Tank N Sikadur-31GB Rapid
For Sika Flex Pro 2HP, PRO 3WF, 11FC.Coverage: Average 150-250g/m2 depending on substrateSizes: 250ml, 1 Litre
SikaBoom S A general purpose expanding polyurethane foam in a can used for fixing and filling gaps in many applications.SikaBoom N+ A B2 rated fire resistant expanding polyurethane foam in a can.
Sika Primer 3N
Sika Foams
Sikadur-Combiflex
Heavy duty slip membrane is designed for use in sliding Joints in reinforced concrete structures where load bearing characteristics are present, and low friction resistance is required. The strip is used in two layers to form a load bearing, low friction sliding joint.
Sizes: 150mm or 300mm x 25m
Slip Membrane
Sealants, Joint Fillers and Construction Chemicals 155
A one component PU foam aerosol gap filler. Expands and cures on application bonding. Excellent sealing and insulating properties combined with outstanding fire resistance.Size: 750ml
A one-component low-modulus neutral cure silicone sealant. Can be used externally and internally. Excellent resistance to fire. Colours: White, Brown, GreySize: 310ml
Flamex One is an intumescent sealant used for low movement joint sealing and gap filling applications such as door and window frames.Size: 380ml cartridge
Flamex Two is a polysulphide intumescent sealant suitable for expansion joints in building superstructures and may be used in both internal and external joints.Size: 2.5 Litres
A fire rated silicone sealant which cures quickly and gives excellent adhesion to most building materials. It is suitable for the fire protection of curtain walling, building facades, expansion joints and penetration seals, where pipes and cables pass through fire rated structures. Size: 380ml cartridge
Single-component, multi-use, rapid curing B1 expanding polyurethane foam. Fire rated to EN1366 for up to 240 minutes by Warrington Fire Institute. For use in sealing, filling, insulating and providing fire resistance.Size: 750ml
Aerosol Foam FR
Silicone Sealant FR
Flamex One
Flamex Two
Flamex SB1 Fire Rated Expanding PU Foam
Fire Protection Products
A one-component intumescent fire proof sealant.Size: 310ml cartridge
A one-part neutral curing, flame retardant silicone sealant suitable for indoor and outdoor applications.Size: 300ml cartridge
Sika Firestop Sika Firesil-N
Sealants, Joint Fillers and Construction Chemicals156
Formwork Chemicals
Formwork
(BCA Category 2)A high quality non-staining release mould oil for use on all types of shuttering and formwork. It incorporates active ingredients which allows forms to remain in place longer than traditional Mould Oils. Coverage: 15-30m2 per litreSizes: 5, 25, 210 LitresColour: Struck Concrete
Adostrip
Concrete Mould Oil (BCA Category 5) High quality mould oil for general site and precast yard use that achieves a top quality concrete finish in most situations. Release is achieved by the oil forming a physical barrier between the formwork surface and the concrete. Surfactants help to eliminate blowholes and provide a clean, uniformed and non-stained surface.Coverage: 30-40m2
Sizes: 5, 20, 25, 205 LitresColour: Colour Free
Adostrike
Water based surface retarder forapplication to concrete top faceaqueous solution of penetrating andretarding agents.Coverage: 30-40m2
Sizes: 5, 20, 25, 205 LitresColour: Light Brown
Safetard Liquid
Water Based Surface Retarder for Application to Formwork A gel type composition, colour tinted to assist application. Formulated to retard the set of fresh concrete that comes into contact with it. It is ideally suited to the production of exposed aggregate finishes or ‘keyed’ surfaces for construction joints or for subsequent application of plasters or renders.Coverage: 3-4m2 per litreSizes: 5, 25 LitresColour: Transparent
Safetard Gel
Plastic Formwork Coating A low viscosity, high solids, single pack moisture curing polyurethane which, being of lower vapour pressure than most similar materials, is an easier material for operatives to use. Includes wetting agents to provide maximum adhesion. Can be used with all types of timber formwork and other porous and semi-porous types of materials used for concrete forming.Coverage: 7-9m2 per litreSizes: 1, 5, 25 LitresColour: Translucent
Adoseal
Sealants, Joint Fillers and Construction Chemicals 157
Chemical release agent (BCA Category 2) Release agent for general site use to achieve easy formwork release and first class concrete finish but also maintains a high degree of formwork cleanliness. It is a blend of reactive oils in a partially evaporative rapid drying hydrocarbon carrier. The carrier dries to form a positive barrier coating on the form face. Coverage: 30-40m2 per litreSizes: 5, 20, 25, 205 LitresColour: Transparent Amber
Adolease
Environmentally Friendly Formwork Release Agent Developed using the latest water soluble polymer technology to produce an environmentally friendly and highly efficient release material for concrete formwork on site. Ready to use and particularly suited to outdoor use on faced sealed plywood, steel moulds and other impervious formwork materials.Coverage: 30-40m2 per litreSizes: 5, 20, 25, 205 LitresColour: White
Safelease
Curing Agents
Water Based, Medium Efficiency Concrete Curing Compound Spray-on temporary membrane to retain moisture in freshly placed concrete. It is formulated to prevent evaporation of the gauging water and provides an economical and efficient method for curing concrete.Coverage: 4-6m2 per litreSizes: 5, 20, 25, 205 LitresColour: Clear
Safecure Standard
Water Based, High Efficiency Concrete Curing Compound Spray-on temporary membrane to retain moisture in freshly placed concrete. It is formulated to prevent evaporation of the gauging water and provides an economical and efficient method for curing concrete.Coverage: 4-6m2 per litreSizes: 5, 20, 25, 205 LitresColour: Clear
Safecure Super
An aqueous silicate solution, designed to deposit a layer of firmly bonded, high cohesive strength, minute crystals within the top surface of the concrete to form an integral membrane.This in turn, will fill all surface pores and capillaries to reduce moisture evaporation.Coverage: 5.5m2 per litreSizes: 5, 20, 25, 210 LitresColour: White
Adocure WW
Fugitive dye is added to Adocure WW to aid visual identification of areas of application.Coverage: 4-6m2
Sizes: 5, 20, 25, 210 Litres Colour: Cloudy Pale Blue
Adocure WWT
Sealants, Joint Fillers and Construction Chemicals158
A water based concrete curing compound based on a low viscosity wax emulsion. It is supplied as a white emulsion which forms a clear film on drying.Coverage: 3.5-5m2 per litreSizes: 20, 210 Litres Colour: Clear
A one-part, sodium silicate based clear liquid for curing fresh concrete.Coverage: 4-7m2 per litreSizes: 25, 200 Litres Colour: Clear
One-component silicate based hardener, dustproofer and curing liquid.Coverage: 4-7m2 per litreSizes: 25, 210 Litres Colour: Clear
Concure WB
Sikafloor CureHard WW Sikafloor CureHard 24
Resin based curing compound of 75% efficiency. This is a solution of inert resins in evaporative solvents for use in general construction projects.Coverage: 4-6m2
Sizes: 5, 20, 25, 210 Litres Colour: Transparent Amber
Adocure Standard
Aluminised for use in strong sunlight conditions and where DTp stipulate aluminised for highways, bridges, runways, etc. Coverage: 4-6m2
Sizes: 5, 20, 25, 210 Litres Colour: Silver/Grey
Adocure Super AL
Resin based curing compound of 90% efficiency. Complies with Clause 1027 of the Department of Transport’s specification for Highway Works, similar to Adocure Standard but with a higher curing efficiency. WBS listed for drinking water projects.Coverage: 4-6m2
Sizes: 5, 20, 25, 210 Litres Colour: Transparent Amber
Adocure Super
Sealants, Joint Fillers and Construction Chemicals 159
A white, soluble, crystalline powder based on metallic fluorosilicates and wetting agents.When Nitoflor Lithurin is mixed with water and applied to the floor, the solution penetrates the concrete reacting with lime and other soluble particles to form granite hard crystals, leaving a permanent, hard wearing and dust free surface.Coverage: 200m2 per packSizes: 15kgColour: White
Nitoflor Lithurin
Hardeners
A spray-on, temporary membrane to retain moisture in freshly placed concrete. It is formulated to prevent evaporation of the gauging water and provides an economical and efficient method for curing concrete.Safecure Standard is a clear, low viscosity liquid which has an alkali reactive emulsion breaking system. Coverage: 4-6m2 per litreSizes: 5, 20, 25, 205 LitresColour: Clear
The application of Adotuf to an existing cement-bound floor will significantly improve the properties of the floor to render it dustproof, oil and grease proof, case hardened, resistant to dilute acids, more durable longer lasting and easier to clean.Coverage: 8m2 per litreSizes: 20, 210 LitresColour: Clear
Safecure Standard Adotuf Concrete Surface Hardener and Dustproofer
Sealants, Joint Fillers and Construction Chemicals160
Dust Proof
Sealers
One-component high performance curing, sealing and hardening liquid the original. The original and the best.Coverage: 5-10m2 per litreSizes: 25, 200 LitresColour: Transparent
One-component high efficiency curing, sealing and hardening liquid, water based.Coverage: 5-10m2 per litreSizes: 25, 200 LitresColour: Transparent
Sikafloor ProSeal Sikafloor ProSeal W
An economical ready to use dustproofer and hardener for concrete paths and slabs.Coverage: 30m2 per litreSizes: 16.5, 205 LitresColour: Transparent
One-component economical curing and hardening liquid with low odour.Coverage: 5-10m2 per litreSizes: 25, 200 LitresColour: Transparent
One-component higher efficiency curing, sealing and hardening liquid.Coverage: 5-10m2 per litreSizes: 25, 200 LitresColour: Transparent
Sika Dustproofer
Sikafloor ProSeal Pro Sikafloor ProSeal 90
Sealants, Joint Fillers and Construction Chemicals 161
Sprayer Type SizeHeavy Duty Metal 8 litreStandard Duty Metal 7.5 litrePlastic 7 litreKnapsack 14 litre
Accessories
A specially selected blend of inorganic acids for the removal of cementitious contaminations and efflorescence from brickwork. Also for removal of rust staining from concrete.The cleaner can be further diluted depending upon application.Sizes: 5, 25 Litres
Formwork joint sealing strip.Sizes: 12 x 6mm, 12 x 25mm
Sprayers: 8 litre metal, knapsack or 7 litre plastic. All sprayers sold as complete units.Sprayer for applying release agents and concrete curing compounds, etc.
Adoclean
Adofoam
Sprayers
Formwork Patch Repair Compound A rapid curing, stainable, two-part unsaturated polyester resin based wood filler designed to give superior performance and longevity. This non-sag, repair filler is ideal for larger repairs to damaged or rot affected timber and is particularly suitable for structural overhead repairs when suitable plastic shuttering is used. It is easy to model and shape upon initial setting. Specifically developed to enable repairs to be carried out within one hour.Coverage: 1m2 per 2kgSizes: 1.4kg, 6kg (other sizes available on request)Colours: White, Dark Oak, Black.
Adofill
Notes162
Notes 163
Did you know that we can also supply….
www.siginsulation.co.uk
www.sigtechnicalinsulation.co.uk
www.sigfixings.co.uk www.sigcommercialdrainage.co.uk
www.siginteriors.co.uk www.sigmechanicalandelectrical.co.uk
Email: [email protected]
United Arab EmiratesDubaiSIG Middle East LLC,Dubai Investment Park,PO Box 215851, DubaiTel: +971 4 8858399Fax: +971 4 8858398
Abu DhabiSIG Middle East LLC,Mohammed Bin Zayed Stadium, PO Box 107729,Abu DhabiTel: +971 4 8858399Fax: +971 4 8858398
QatarDohaSIG Middle East LLC, Block D1,Al Waab City, Street 162, Zone 55, Al Wukair Street,PO Box 31637, Doha QatarTel: +974 4 4432030Fax: +974 4 4694900
Sultanate of OmanMuscatSIG Middle East LLC,Wolf Developments Ghala Industrial Estate, PO Box 136,Postal Code 103Tel: +968 2 4505517Fax: +968 2 4502304
Middle East Branch Network:
Products are available from the following SIG branches:
Our specialist centres:
www.sig-ca.co.uk
Aberdeen Silverburn Place, Bridge of Don, Aberdeen, AB23 8EG Tel: 01224 822798 Fax: 01224 823741
Ash Vale Lysons Link South, Lysons Avenue, Ash Vale, Surrey, GU12 5GN Tel: 01252 527000 Fax: 01252 548666
Bedford Telford Way, Bedford, MK42 OPQ Tel: 01234 268427 Fax: 01234 268057
Birmingham Apollo Park, Rounds Green Road, Oldbury, West Midlands, B69 2DF Tel: 0121 522 0200 Fax: 0121 522 0201
Bristol Unit 13, Concorde Road, Patchway Industrial Estate, Bristol, BS34 5TB Tel: 0117 301 3620 Fax: 0117 969 1224
Cardiff Southpoint, Forshore Road, Cardiff, CF10 4SP Tel: 029 2046 5553 Fax: 029 2049 3089
East Midlands Unit 3, Cossall Industrial Estate, Coronation Road, Ilkeston, DE7 5UA Tel: 0115 931 6402 Fax: 0115 930 9249
Eurocentral Coddington Crescent, Eurocentral, Holytown, Motherwell, North Lanarkshire, ML1 4YF Tel: 01698 731910 Fax: 01698 731911
Glasgow 21 Dava Street, Govan, Glasgow, G51 2JA Tel: 0141 445 7960 Fax: 0141 445 1078
Inverness 28 Harbour Road, Inverness, IV1 1UA Tel: 01463 701 200 Fax: 01463 701 201
Leeds Intermezzo Drive, Pontefract Road, Leeds, West Yorkshire, LS10 1RU Tel: 0113 385 7760 Fax: 0113 385 7761
Maidstone Unit 5, Larkfield Mill, Bellingham Way, Larkfield, Kent, ME20 6SQ Tel: 01622 711 711 Fax: 01622 713 481
Manchester Trafford Point 1, Twining Road, Stretford, Manchester, M17 1SH Tel: 0161 872 5464 Fax: 0161 872 5399
Norwich Unit 27, White Lodge Business Park, Hall Road, Norwich, NR4 6DQ Tel: 01603 224 899 Fax: 01603 224 898
Oxford Unit 5, Curbridge Business Park, Downs Road, Witney, Oxon, OX29 7WJ Tel: 01993 704289 Fax: 01993 708993
Plymouth 87 St Modwen Road, Parkway Industrial Estate, Marsh Mills, Plymouth, PL6 8LH Tel: 01752 894965 Fax: 01752 895896
Ruislip Unit 4, Victoria Road Retail Park, Crown Road, South Ruislip, London, HA4 0AF Tel: 020 8606 8060 Fax: 020 8606 8070
Thurrock Victor House, Bay Manor Lane, Grays, Essex, RM20 3LL Tel: 020 8591 9991 Fax: 020 8591 9992
Tyneside Federation Business Park, St Omers Road, Dunston, Tyne and Wear, NE11 9EE Tel: 0191 487 4983 Fax: 0191 491 5790
Don’t forget your fixings… our branches offer a range of complementary fixings for your
Commercial Drainage needs
SIG is committed to the health, safety and wellbeing of our employees, customers and the general public. We operate a zero harm policy and have gained accreditation to FORS at all of our operating sites.
For more information please visit: www.sigassured.co.uk
Geotechnical Centre (National) Tel: 0844 443 0050 Fax: 0844 443 0051
GEOTECHNICAL CENTREManchester (North) Tel: 03301 231 801 Fax: 03301 231 802
Ruislip (South) Tel: 020 8606 8060 Fax: 020 8606 8070
MASONRY CENTRE
Midlands Tel: 03301 231 791 Fax: 03301 231 796 E: [email protected]
London West – Ash Vale Tel: 03301 231 790 Fax: 03301 231 795 E: [email protected]
Manchester Tel: 03301 231 793 Fax: 03301 231 798 E: [email protected]
Scotland – Glasgow Tel: 03301 231 792 Fax: 03301 231 797 E: [email protected]
CONCRETE REPAIR CENTREBristol Tel: 03301 231 781 Fax: 03301 231 785 E: [email protected]
Maidstone Tel: 01622 711 711 Fax: 01622 713 481 E: [email protected]
Manchester Tel: 03301 231 782 Fax: 03301 231 786 E: [email protected]
Scotland – Glasgow Tel: 03301 231 804 Fax: 03301 231 803 E: [email protected]
Tyneside Tel: 03301 231 784 Fax: 03301 231 788 E: [email protected]
MERCHANT SUPPORT CENTRE
We also do business in the Middle East. For full branch details please see page 163.