connectors - titus groupconnectors information titus connectors add value to furniture and to...
TRANSCRIPT
Con
nect
ors
Titus GroupProduct brochure
2019
Connectors
Important Information
Intellectual property
Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the ‘know how’ contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights in others. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law.
Responsibility
It is the responsibility of the user to ensure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives.
Technical information
While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confirm the up to date specification before ordering.
*Non preferred articles
All Item numbers in the catalogue marked with * are for non preferred non stock items available upon special request. For such products, extended delivery times may apply.
Trademarks
Titus is a registered trademark of Titus International Ltd.
1
Connect with Titus on social media:
@TitusPlus
@TitusGroup
ConnectorsProduct Guide
2
6
9
10
12
16
Fittings for rigid assembly systems
System 1Page
a highly cost-efective and rigid assembly system for factory, consumer and home assembly
Fittings for face-boring applications
System 2
face boring applications that provide a tolerant efficient assembly
Fittings for face and edge boring
System 3
two component rigid face and edge drilling fastening
Fittings for face-boring only
System 4
a range of low-cost one-piece fittings for high volume home assembly applications
Cams and dowels
System 5
a comprehensive range of cam and dowel connecting fittings for all cabinet applications
32
39
QuickfitTM ConnectorsFittings for face boring only
System 6
face boring connectors for all cabinet applications.
Page
Heavy duty cams and dowels
System 7
high quality fittings for offices and public furniture.
3
4
Why Choose Titus?
Titus connectors improve the quality of furniture and lower the cost of manufacturing and assemblywhile ensuring a high degree ofcustomer satisfaction.
Precise and efficient product design.The broadest possible range of drilling tolerances ensures reliable assembly and consistently strong joints. Klix locking feature, the engagement of interlocking teeth on cam and dowel, to prevent joint loosening in service or transit. Expanding function provides degrees of variation in out-of-tolerance drillings ensuring stronger joints and improved quality of furniture. Twinstart thread for faster and more stable insertion. Depth stop collar prevents over-insertion. Firm tightening for greater confidence in use. Cam locks at 230° assuring smooth tightening action and greater dowel pull-up.
QuickfitTM for hand dowel insertion.QuickfitTM TL2, TL4 with the built-in self adjustment feature is the only available dowel that allows for pre-insertion.Quickloc one piece fitting for faster assembly with integrated expanding cam and dowel. Zinc+steel dowel for optimal strength and performance. Precise dowel manufacturing high precision of zinc and strength of steel assures 100% dimensional accuracy.
ConnectorsInformation
Titus connectors add value to furniture and to furniture manufacturing
The most advancedrange of connectorsavailable on the market
Easy and quick consumer friendly self-assembly of furniture
Self-assembly furniture offers consumers good value and instant availability of products.
With the aim of providing consumer with simpler instructions, fewer parts and an easier assembly process, Titus has significantly reduced and simplified the number of fittings traditionally required in furniture production.
Titus connectors provide consumers with easy assembly and furniture producers with increased productivity: - reduced number of assembly parts- easy assembly instructions- security of packed parts during transit
Con
nect
ors
Con
nect
ors
5
T A N CAF
4 38 3 126
6 21 4 108
6 15 4 84
6 7 4 52
2 3 2 10
2 3 1 5
1 0 1 1
Easy and Quick Furniture Assembly
ConnectorsInformation
CAF formula
How does it work?
Connecting screw (traditional assembly)
Cam & Single start dowel
Cam & Twinstart dowel
Cam & TL2 dowel (self-assembly)
Cam & TL2 dowel (factory pre-inserted)
Quickloc
Fully assembled demonstrator
Comparative CAF scoresto assemble a hand helddemonstrator
CAF=Consumer Assembly Friendliness
Titus CAF formula provides a comparative measure for customer satisfaction. By using it manufacturers are able to evaluate their products internally or against those of their
competitors. While offering consumers easier andfaster assembly, there are obvious advantages also for furniture manufacturers – buying, counting, bagging and stocking of fittings can be greatly reduced.
6
System Features
The Hi-Lo™ carcase construction screw (CCS) offers a strong, tolerant and cost effective connection with minimal panel preparation.
The combination effect of the elements of a Hi-Lo™ screw means· A greater differential between drive
torque and strip torque in fibrous and particle materials to ensure a reliable and repeatable fixing
· Hi-Lo™ threads provide minimum bursting forces
· ‘Hi’ thread gives low bursting component force from the sharp 30 degree angle thread
· ‘Lo’ thread at 60 degree angle uses the vertical force component to press fibrous and particle components of panels onto the ‘Hi’ thread and are contained by their greater height
· The very small shank on a Hi-Lo™ screw means less material displacement than conventional threads and enables minimum or partial drilling of pilot holes for speedier panel processing
Hi-Lo™ carcase construction screw
System 1Fittings for Rigid Assembly Systems
· Used with Titus Hi-Lo™ screws · Titus barrel nuts provide maximum
strip torque for reasonable drive torque
· Capable of multiple reconnection repeatability
Barrel nut (plastic)
· Available in multiple colors · All recess and head types offered · High quality engineering polymers
used in their construction · Uniformity of holding with good
tolerance · Wide range of application and use
conditions
Cover caps
· Zinc diecast for precision· Titus Double locking carcase screw
makes an almost invisible connection · Collar under the head to pull panels
together
· 2nd ‘lower’ thread pulls against a ‘faster’ thread to provide maximum connection force and prevents overdriving of fastener
· Almost invisible in position· Head can be ‘fastcapped’ or filled
Double locking carcase screw
Con
nect
ors
Con
nect
ors
7
42
SPECIAL SCREW 'APPLICATION DRAWING'
3. SCREW INTO Ř5mm HOLE.
1. DRILLING DETAILS Ř5.0
0
TO SUIT BOARD MATERIALDRILL HOLE Ř7.0/8.0
MIN DEPTH.30.00
BY COLLAR ON SCREW.4. BOARD JOINT PULLED UP 5. BOARD LOCKED IN PLACE
BY SCREW.
2. INSERT SCREW TO SHOULDER15.00
IN FACE BOARD.
00180 > 885
SPECIAL SCREW 'APPLICATION DRAWING'
3. SCREW INTO Ř5mm HOLE.
1. DRILLING DETAILS Ř5.0
0
TO SUIT BOARD MATERIALDRILL HOLE Ř7.0/8.0
MIN DEPTH.30.00
BY COLLAR ON SCREW.4. BOARD JOINT PULLED UP 5. BOARD LOCKED IN PLACE
BY SCREW.
2. INSERT SCREW TO SHOULDER15.00
IN FACE BOARD.
SPECIAL SCREW 'APPLICATION DRAWING'
3. SCREW INTO Ř5mm HOLE.
1. DRILLING DETAILS Ř5.0
0
TO SUIT BOARD MATERIALDRILL HOLE Ř7.0/8.0
MIN DEPTH.30.00
BY COLLAR ON SCREW.4. BOARD JOINT PULLED UP 5. BOARD LOCKED IN PLACE
BY SCREW.
2. INSERT SCREW TO SHOULDER15.00
IN FACE BOARD.
SPECIAL SCREW 'APPLICATION DRAWING'
3. SCREW INTO Ř5mm HOLE.
1. DRILLING DETAILS Ř5.0
0
TO SUIT BOARD MATERIALDRILL HOLE Ř7.0/8.0
MIN DEPTH.30.00
BY COLLAR ON SCREW.4. BOARD JOINT PULLED UP 5. BOARD LOCKED IN PLACE
BY SCREW.
2. INSERT SCREW TO SHOULDER15.00
IN FACE BOARD.
min 30
Ø7/7.5
15/16Ø5
Item number Zin
c
2000 Pcs
System 1Fittings for Rigid Assembly SystemsDouble Locking Carcase Screw
Screw6x42
Made of zinc
1. Insert screw to shoulder in face board
2. Screw into Ø5mm hole
3. Board joint pulled up by collar on screw
4. Board locked in place by screw
Technical andmounting details
· High performance from widely spaced primary thread· Finer secondary thread provides additional holding
power and positive stop (no override)· Increased support for vertical panel is gained from
the funnel head with collar at its base· One-piece fitting
8
00062 >
00068 >
00071 >
06074 >
00077 >
00172 >
06077 >
06080 >
25
28
33
38
45
55
50
50
01020 >
01042 >
852
852
852
852
852
852
852
852
877
877
01056 >
L
00770172
00660071
POZIDRIV No.2 RECESS
POZIDRIV No.2 RECESS
11.5-13
Ø7.9
Ø7.6
44-45.553.5-55
47-48
12-14
4-5
18-1932-33
S
6-85-6
1056
L
SL
L
Ø5
00770172
00660071
POZIDRIV No.2 RECESS
POZIDRIV No.2 RECESS
11.5-13
Ø7.9
Ø7.6
44-45.553.5-55
47-48
12-14
4-5
18-1932-33
S
6-85-6
1056
L
SL
L
Ø5
835
Ø3
9 min
Ø5
Ø12x11
B
7.5/8
877
4
4
4
4
4
4
4
5
835
20
23
28
33
40
50
45
45
A1
Item number Bla
ck
Pho
spha
teBarrel nut
10000 Pcs Made of plastic
Whi
te
Tota
l Len
gth
50000 Pcs
System 1 Fittings for Rigid Assembly SystemsHi-Lo™ Screw and Barrel Nut
Hi-Lo™ screw
Made of steel
Made of plastic
Screw cap
· Hi-Lo™ screws have a twin thread for faster insertion· ‘Hi’ threads and ‘Lo’ threads combine to give excellent
pull out in chipboard· Funnel head design means no countersinking· Steel is case hardened for extra strength
Technical andmounting details S
crew
dia
met
er
Other colors on request
Other colors on request
pozi, philips
hexagon
3000 Pcs (00172, 06077, 06080)
4000 Pcs (00077, 06074)
7000 Pcs (00071)
9000 Pcs (00068)
10000 Pcs (00062)
Con
nect
ors
9
02077 > 877
10
10
Ø4.5
Ø10.6
11.5
161632.5
18
17
Ø4.5
32
17
1730
5
7
13.5
13.5
Item number Dar
k b
row
n
Lig
ht b
row
n
Ivo
ry
Whi
te
System 2Fittings for Face-Boring Applications
· Range of fixing blocks for multiple applications· Face drilling only required· Durable plastic material is flexible providing
greater holding power· Choose screw fastening or hammer insertion
2000 Pcs Made of plastic
Technical andmounting details
10
System Features
Titus System 3 is a two component rigid face and edge drilled fastening with half turn to fasten. System 3 offers almost full concealment and wide tolerances in use.
· Automatic or in-factory placement· Pre-location pin ensures ease of
assembly· Less than one turn of a screwdriver
to fasten· Shelf edge installation of pin means
maximum shelf cut size tolerance· Can be used on 12mm shelf panels· No loose parts for maximum
convenience in RTA · Drawer front fixing, cabinet
construction
System 3Fittings for Face and Edge Boring
Con
nect
ors
11
System 3Fittings for Face and Edge BoringConcealed Housing
· One turn locking system reduces assembly time, both in the factory and home
· Pre-assembly feature for consumer convenience· Choice of dowels to suit drilling· Hi-Lo screw feature for faster insertion
03118 >
03090
831
03165 > 883
D2D
12.5
25 883
877 835
C
3
Item number Dar
k b
row
n
Zin
c P
late
d S
teel
Screw dowel Ø5
Dri
lling
dia
met
er
for
do
wel
thr
ead
2500 Pcs
Housingassembly
Made of plastic or zinc, plastic
Screw dowel Ø3
1000 Pcs Made of steel
X, Y - depends on board thickness
Whi
te
Other colors on request
Dri
lling
dep
th
Dri
lling
leng
th
for
do
wel
X, Y - depends on board thickness
X, Y - depends on board thickness
Technical andmounting details
Made of steel2500 Pcs (03090)
X-Y+
7
Ø25 x D
31183121
3168
3180
1210
(Y=9
.5 M
AX)
(Y=9
.5 M
AX)
(Y=9
.5 M
AX)
YX
POZIDRIVE
Ø5 x 30
X-Y+
7 YX
ØD2 x C
X-Y+
7 YX
H
X-Y+
7
Ø25 x D
31183121
3168
3180
1210
(Y=9
.5 M
AX)
(Y=9
.5 M
AX)
(Y=9
.5 M
AX)
YX
POZIDRIVE
Ø5 x 30
X-Y+
7 YX
ØD2 x C
X-Y+
7 YX
H
X-Y+
7
Ø25 x D
31183121
3168
3180
1210
(Y=9
.5 M
AX)
(Y=9
.5 M
AX)
(Y=9
.5 M
AX)
YX
POZIDRIVE
Ø5 x 30
X-Y+
7 YX
ØD2 x C
X-Y+
7 YX
H
Bla
ck
12
System Features
Cost effective one piece fittings with face boring benefits
· Flush and block components· Face-boring only· Good tolerances · One piece connectors· Angle drive versions fastening with
maximum driving power and flexibility· Quickloc™ versions need only one
turn to tighten for fast assembly · Foolproof consumer home insertion
System 4Fittings for Face-Boring Only
Quickloc™
Quickloc™ Assembly
The integrated housing and dowel make Quickloc™ the most user-friendly and tolerant product available.
· High degree of drilling tolerance· Push-in design· Tool-free insertion · Integrated expanding housing and
dowel provide consistently stronger joints
· ‘Klix’ locking system
3. Tighten in less than one turn
1. Press Quickloc™ into the face board 2. Assemble the panels
Con
nect
ors
13
835877
87706802 >
831
835 831
871
6806
Ø19.6
6803
22
11.5 Ø8
12 6.5
10
9.5
Ø20
Ø8
9.5 Ø8
9.5
4.510
Ø20
Ø8
10
06803 >
6806
Ø19.6
6803
22
11.5 Ø8
12 6.5
10
9.5
Ø20
Ø8
9.5 Ø8
9.5
4.510
Ø20
Ø8
10
Ø10
115
12
6813
Ø25
13
Ø10
10.5 A1
Ø10
115
12
6813
Ø25
13
Ø10
10.5 A1
Dar
k b
row
n
Tan
System 4Quickloc™
One Piece Expanding Connector
Quickloc™ Ø20 flanged
Item number Bla
ck
Whi
te
· An innovative, one-piece connector, capable of hand insertion· Is highly tolerant and tightens in less than one turn · Is a face-bored product· Offers a high degree of drilling tolerance and is the only
connector of its type to provide pull-up of cabinet panels when tightened
Technical andmounting details
Made of zinc, plastic
Made of zinc, plastic
2500 Pcs
1500 Pcs
Quickloc™ Ø25 flanged
14
00022 >
02190 > 877831
885
835
00220021
2161
2193
21722182
thread - single startthread - twin start
unthumpedthumped
27.5
27.5
11.8Ø10.6
10
Flusbloc™assembly
System 4Fittings for Face-Boring OnlyFlushbloc™ / Flushfix™
Angeldrivscrew for use with Flushfix™
· The Angeldriv screw provides high level of tolerance· Face drilling only required· Corner joint and shelf fixing options
2500 Pcs Made of zinc, plastic
Other colors on request
Item number Whi
te
Zin
c
Bla
ck
flat head
Technical andmounting details
4000 Pcs (00022)
Dar
k b
row
n
Ø5x13
Ø25x11 12
4.5
Ø5x13
Ø25x11 12
4.5
Ø5x13
Ø25x11 12
4.5
Ø5x13
Ø25x11 12
4.5
Ø5x13
Ø25x11 12
4.5
Ø5x13
Ø25x11 12
4.5
Made of zinc
Con
nect
ors
15
0021 unthumpedthumped0022
2130
Ø6Ø10
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY16 17
278.41299.5
21.5 19
12 10
6 Ø315.5
Ø10
13
Ø10.5
10.5
Ø8.2
Ø10.5
835
D
11 877
Ø5 x 10.5Ø10 x D
6
11
Ø8 x 13Ø8 x D
6
11
Ø5 x 10.5Ø10 x 11
6
11
831
System 4Fittings for Face-Boring OnlyMinibloc™
· One-piece connector range· Face drilling only required· Easy to use, foolproof home insertion· Angeldriv screw tolerates good levels of
inaccurate drilling increasing consumer confidence
* 02120 >
* assembly with screw
Minibloc™
Made of zinc, plastic
Other colors on request
Item number Bla
ck
Whi
te
Dar
k b
row
n
Dri
lling
dep
th
Technical andmounting details
2500 Pcs (02120)
16
System 5Cams and Dowels
System Features
Titus System 5 is a comprehensive range of cam and dowel connecting fittings with Klix and QuickfitTM featuresfor all cabinet applications: panel-to-panel, panel-to-hollow profile, back-to-back
Fittings are made from zinc, steel and high grade pastic. Dowels
• QuickfitTM TL2, TL4 dowels a unique solution for factory pre-insertion, high level of drilling tolerances
• QuickfitTM dowels quick hand insertion, easy assembly
• Diecast dowels (zinc) precise manufacturing, optimal shape and design
• Turned dowels (steel) ‘traditional’ design, smooth surface, best strength performance
• Combi dowels (zinc and steel) high precision of zinc, strength of steel, 100% dimensional accuracy and optimal performance
Titus Klix locking system enusres the engagement of the interlocking teeth on cam and dowel providing:
· vibration-proof joint· rigid construction that will not loosen
is service or transit
Titus Klix™
The most advanced cam and dowel range
Quickfit dowel1
Second
Single start threadStandard dowel
7Seconds
Twin start threadCombi dowel
4Seconds
Dowel insertion time comparison
Linear cam profile assures smooth, firm tightening action and greater pull-up. The cam always locks at 2 o'clock lock (230°), enabling greater consumer confidence in use while improving furniture quality.
2 o'clock lock Smooth closing
Con
nect
ors
17
Tolerance rangeIntervallo di tolleranza
Tolerance rangeIntervallo di tolleranza
Tolerance rangeIntervallo di tolleranza
max.25(35) min.23(33)ETHC ETHC
±1 mm
max.25ETHC
min.23ETHC±0.5 mm ±0.5 mm
Tolerance rangeIntervallo di tolleranza
Tolerance rangeIntervallo di tolleranza
Tolerance rangeIntervallo di tolleranza
max.25(35) min.23(33)ETHC ETHC
±1 mm
max.25ETHC
min.23ETHC±0.5 mm ±0.5 mm
Tolerance rangeIntervallo di tolleranza
Tolerance rangeIntervallo di tolleranza
Tolerance rangeIntervallo di tolleranza
max.25(35) min.23(33)ETHC ETHC
±1 mm
max.25ETHC
min.23ETHC±0.5 mm ±0.5 mm
QuickfitTM TL2 and QuickfitTM TL4 are the only available dowels that allow for factory pre-insertion
· Easier packing· Less damages in handling· Perfect for the RTA market
Pre-inserted dowels
System Features
Optimal performance and perfect joint even with inaccurate drilling.
Zinc/Combi dowel
+/-0.5mm
+/-1mm
+/-1mm
QuickfitTM TL2 dowel
QuickfitTM TL4 dowel
Drillingtolerances
+/-1mm
ETHC=Edge To Hole Center
Typical ETHC (EDGE TO HOLE CENTRE) measurements
0
2
4
6
8
10
12
14
16
18
20
ETHC
Nu
mb
er o
f O
ccu
ren
ces
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
+ / - 0.5 mm
measurements
Nu
mb
er o
f O
ccu
ren
ces
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20measurements
Nu
mb
er o
f O
ccu
ren
ces
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20
+ / - 1 mm + / - 1 mm
Typical ETHC (EDGE TO HOLE CENTRE) measurements
0
2
4
6
8
10
12
14
16
18
20
ETHC
Nu
mb
er o
f O
ccu
ren
ces
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
+ / - 0.5 mm
measurements
Nu
mb
er o
f O
ccu
ren
ces
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20measurements
Nu
mb
er o
f O
ccu
ren
ces
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20
+ / - 1 mm + / - 1 mm
Typical ETHC (EDGE TO HOLE CENTRE) measurements
0
2
4
6
8
10
12
14
16
18
20
ETHC
Nu
mb
er o
f O
ccu
ren
ces
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
+ / - 0.5 mm
measurements
Nu
mb
er o
f O
ccu
ren
ces
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20measurements
Nu
mb
er o
f O
ccu
ren
ces
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20
+ / - 1 mm + / - 1 mm
Tolerance range
Tolerance range
Tolerance range
System 5Cams and Dowels
QuickfitTM TL Connectors
2a. Either push dowel into edge hole or...
3. Assemble the panels 4. Tighten cam to lock dowel
QuickfitTM TL dowel offers furniture manufacturers a fast assembly system providing high drilling tolerances. It has a built-in self-adjustment feature, which enables common drilling inaccuracies to be overcome.
For the self-assembly furniture consumer, Titus QuickfitTM TL is the most consumer friendly fitting on the market. Apart from the benefit of fully tightened joints and easy locking into the same position, QuickfitTM TL provides an exceptionally smooth action when tightened, requiring very little effort.
Drilling tolerances
Assembly
2b. Insert the dowel into side panel
System 5Cams and Dowels
Marginal inconsistencies of drilling and the problems associated with the natural movement of wood panels, no longer present problems.
QuickfitTM TL provides a tolerance of +1/-1mm on drilling operation while ensuring that the final result is a perfectly precise and aligned joint. No other assembly fittings system can offer such tolerances and still maintain a perfect joint.
1. Press the cam into face board
18
Con
nect
ors
small bursting angle
Cam
Dowel
Zinc+steel technology for optimal strength and performance
Zinc+Steel Combi Dowels
toroidal head form
zinc body
twinstart thread
steel neck and head
positive stop collar
The steel neck and head providebetter resistance to torsion and pull-outenabling a high performance joint
The Combi dowel combines steel anda small amount of zinc to ensure highprecision and dimensional accuracy,essential to provide furnituremanufacturers with the broadest possible range of drilling tolerances.
Zinc body:Positive stop collar ensures correct insertion depthTwinstart for faster and more stable insertion
System 5Cams and Dowels
The toroidal dowel head form transfers the forces between camand dowel more effectively resultingin a small cam bursting force.
100% dimensional accuracyassured
100% accurate
19
20
System 5QuickfitTM TL5‘Full Metal Jacket’
· Tool-free insertion technology for Ø5mm dowel holes· Drilling tolerances of +1/-1mm when edge or face inserted · Expanding steel sleeve assures a strong joint, highly
resistant to pull-out · Suitable for use with Cam5000· Functions in multiple wooden materials (chipboard, MDF,
solid wood)
2000 Pcs Made of steel
09652 >
09651 >
897
897
34
24
Item numberDri
lling
d
ista
nce
Technical details Zin
c co
rro
sil
Ø5 x 12
34
Ø8
Ø5 x 12
A
Ø8
±1 mm
35 33
TL2
TL3ETHC
max. 25 (35)ETHC
ETHC
min. 23 (25)ETHC
Tolerance range
Edge to holetolerance
To be used with Cam5000 only
Con
nect
ors
21
±1 mm
max.25 min.23
max.25(35) min.23(33)ETHC ETHCTL2
TL3ETHC ETHC
05453 >
05503 >
05441 >
05474 >
5
5
8
8
8
ØD2 x 12
A
Ø8
Ø8 x 12
24
Ø8
A D2
24
34
24
34
24
880
880
880
880
05388 >
ØD2 x 12
A
Ø8
Ø8 x 12
24
Ø8
±1 mm
max.25 min.23
max.25(35) min.23(33)ETHC ETHCTL2
TL3ETHC ETHC
System 5Cams and Dowels QuickfitTM-TL Dowels
QuickfitTM-TL2
· Available in Ø5mm and Ø8mm for panel-to-panel applications
· Suitable for use with all Ø15mm Cam2000 and Cam3000 products
· ‘Klix’ locking feature provides a strong, vibration proof joint· Highly tolerant in edge-inserted, TL4 also in face-inserted
applications
Technical andmounting details
QuickfitTM-TL4
Dri
lling
dis
tanc
e
Dri
lling
d
iam
eter
fo
r d
ow
el t
hrea
d
Item number Dar
k g
rey
Tolerance range
3000 Pcs Made of zinc, plastic
Made of zinc, plastic
Tolerance range
Edge to holetolerance
Hole to hole tolerance
1000 Pcs (05474)
2000 Pcs
Edge to holetolerance
Bla
ck
835
22
05563 >
05570 >
05129 >
880
880
880
Ø5.8
11.5
L
Ø8
Ø5
11.2
Ø10Ø5.8
Ø5.8
L
L
Ø8 12
A
ØD2
Ø8
A
12
Ø8
Ø812
Ø10
A
8
10
10
8
D2
24
24
34
A
System 5Cams and Dowels QuickfitTM Dowels QuickfitTM P2F Dowels
QuickfitTM dowels
Made of zinc, plastic
· Available in Ø8mm and Ø10mm for panel-to-panel applications and in Ø8mm for panel-to-hollow profile applications
· Suitable for use with all Ø15mm Cam2000· ‘Klix’ locking feature provides a strong, vibration
proof joint· Depth stop collar for accurate insertion
Item number Dar
k g
rey
Dri
lling
dia
met
er f
or
do
wel
thr
ead
Dri
lling
d
ista
nce
Technical andmounting details
1500 Pcs (05129)
2000 Pcs
SYS05414/app
05414 > 835
Ø7.8
10
Ø8
Ø7.8
10
Ø824
Ø8 x thru
1.0 - 1.5 approx.
Ø8
A
QuickfitTM - P2F
Bla
ck
2000 Pcs Made of zinc, plastic
Con
nect
ors
23
TA
09424 >
09423 >
09456 >
885
885
885
11
11
8.5
34
24
34
System 5Cams and DowelsCombi Dowel
· High quality zinc-steel dowel with greater resistance to torsion and pull-out
· Suitable for use with all Ø12mm and Ø15mm Cam2000 and Cam3000 products
· ‘Klix’ locking feature provides a strong, vibration proof joint· Twinstart thread for faster and reliable insertion
Combi dowel
Item number Zin
c
Dri
lling
d
ista
nce
Technical andmounting details
Philips PH2 head
Made of steel and zinc
Thr
ead
le
ngth
2000 Pcs
InsertsMade of plastic
twinstart thread 02182-846
Ø7-8 12
Ø5
A
Ø5.8
T
Ø6
10000 Pcs
24
05929 >
05757 >
05778 >
05753 >
883
883
883
883
ØD1
A
B
A
7-8
7-8
7-8
7-8
24
34
24
34
0*
0*
19
19
D1A B
System 5Cams and DowelsDouble-ended Dowel
Dowelwithout circlip
Made of steel
· Available in Ø7mm· Suitable for use with all Ø12mm and Ø15mm
Cam2000 and Cam3000 products· No circlip for increased tolerance· Available in a variety of lengths to suit most panel-to-
panel applications
Item number Zin
c P
late
d S
teel
Dri
lling
dia
met
er
for
do
wel
bo
dy
Dri
lling
d
ista
nce
Pan
el
thic
knes
s
*B=0 >no panel required
Technical andmounting details
2000 Pcs (05929)1000 Pcs (05757) 500 Pcs (05778) 250 Pcs (05753)
Con
nect
ors
25
05860 >
20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 67,5° 70° 75° 80° 85°
13 61.9 57.9 55.3 53.5 51.7 50.5 49.5 48.6 47.8 47 46.7 46.4 45.7 45.1 44.6
15 64.6 60.1 57 54.7 52.9 51.5 50.3 49.3 48.3 47.5 47.1 46.7 46 45.3 44.7
16 66 61.2 57.9 55.4 53.5 52 50.7 49.6 48.6 47.7 47.3 46.9 46.1 45.4 44.7
B 18 68.8 63.3 59.6 56.9 54.7 53 51.6 50.3 49.2 48.2 47.7 47.3 46.4 45.6 44.8
19 70.1 64.4 60.5 57.6 55.3 53.5 52 50.7 49.5 48.4 47.9 47.5 46.5 45.7 44.8
22 74.2 67.6 63.1 59.7 57.1 55 53.2 51.7 50.4 49.1 48.6 48 46.9 45.9 45
23 75.6 68.7 63.9 60.4 57.7 55.5 53.6 52.1 50.6 49.4 48.8 48.2 47.1 46 45 x
883
Ø15
44
Ø7-8
44
44
B/2B
x
System 5Cams and DowelsAngled Dowels
· Suitable for applications requiring angled joints· Suitable for use with all Ø12mm and Ø15mm
Cam2000 and Cam3000 products· Adjustable angle from 90° to 180°
Item numberTechnical andmounting details
Angled dowel
Made of steel or zinc650 Pcs
Distance x in mm
Zin
c P
late
d S
teel
Minimum ordered quanity may be required
26
System 5Cams and DowelsEnd Dowels
05609 >
*05611 >
A B
ØD1
A B
ØD1
20 16
Ø6-7
S L
Dogbone Dowels ¯5 Cam 2000Connectors 5
¨
Mushroom Dowels Connectors 5
¨
Connectors 5
¨
43.5
53.5
39.5
49.5
56115610
56085609
50905091
57865787
34
24
34
24
COUNTERSUNK
boardthick.
1916
ETHC
1916
49.546.5
S36.539.5
53.550.5
43.540.5
L
ETHC
1916
boardthick.
1619
MUSHROOM
Ø5.9
LS
Ø7
Ø11
4952
3942
4649
S
3936
L
S
Ø5.9
Ø7
L
Ø11
A B
24
34
19
19
D1
7-8
7-8
1000 Pcs
Mushroom dowel
Made of zinc
· Available in a variety of head and length combinations to suit most end panel applications
· Suitable for use with all Ø12mm and Ø15mm Cam2000 and Cam3000 products
· ‘Klix’ locking feature provides a strong, vibration proof joint· Both ‘mushroom’ and countersunk headed versions
available
Leng
th
Item numberTota
l len
gth
Pan
el
thic
knes
s
Dri
lling
d
ista
nce
Dri
lling
dia
met
er
for
do
wel
bo
dy
Technical andmounting details
*Available upon request
Con
nect
ors
27
e hB D
09695 >
09690 >
885
885
12/13
15/16
10.5
12.5
6 min
7.5-8
9.9
11.9
09699 >
09692 >
885
885
15/16
18/19
12.5
14
7.5-8
9-9.5
11.9
13.2
Item number Zin
c
Dri
lling
fo
rd
ow
el
Cam
hei
ght
Pan
el
thic
knes
s
Dri
lling
d
epth
Cam5000cross drive
Cam5000hexagonal drive
Technical andmounting details
Made of zinc1000 Pcs
Made of zinc1000 Pcs
· Improved central shape for highly resistant joint· Suitable for use with all Titus dowels· ‘Klix’ locking feature provides a strong, vibration proof joint· Cam retaining pips ensure that cam is held in panel position
prior to assembly
Cover caps > see page 41
Combined drive with HEX
System 5Cams and DowelsØ15mm Cam5000
9537
9533Ø15
eh
9537
9533Ø15
eh
5675
5677 13 17.4
5658
5652
5659 8
6.5 12.4 10.9
9.5
11.5
13.9 15.9
26 17.5
13 11
12.5 19
23
14
16
16
5586 6 9.9
5678 5679
6 10.4 7.5 11.9
12 10
29 28/29 10.5
12
5676
5654
5657 5656
6 9.9
10.4
11.9 7.5
6 6
9.9
5563
5587
5644 6 6
10.4 9.9
7.5 11.9
25/26
15/16
22/23 18/19
10
12
10
10.5
12/13
15/16 12/13
10
10.5 12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
5675
5677 13 17.4
5658
5652
5659 8
6.5 12.4 10.9
9.5
11.5
13.9 15.9
26 17.5
13 11
12.5 19
23
14
16
16
5586 6 9.9
5678 5679
6 10.4 7.5 11.9
12 10
29 28/29 10.5
12
5676
5654
5657 5656
6 9.9
10.4
11.9 7.5
6 6
9.9
5563
5587
5644 6 6
10.4 9.9
7.5 11.9
25/26
15/16
22/23 18/19
10
12
10
10.5
12/13
15/16 12/13
10
10.5 12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
PZ2 drive
9537
9533Ø15
eh
9537
9533Ø15
eh
28
5675
5677 1317.4
5658
5652
56598
6.512.410.9
9.5
11.5
13.915.9
2617.5
1311
12.519
23
14
16
16
5586 69.9
56785679
610.47.511.9
1210
2928/2910.5
12
5676
5654
56575656
69.9
10.4
11.9 7.5
66
9.9
5563
5587
564466
10.49.9
7.511.9
25/26
15/16
22/2318/19
10
12
10
10.5
12/13
15/1612/13
10
10.512
eH BD
eH BD
H e BD
eH BD
Ø15
Ø17
Ø15
B D
Ø15xD
e 1 mm
5675
5677 1317.4
5658
5652
56598
6.512.410.9
9.5
11.5
13.915.9
2617.5
1311
12.519
23
14
16
16
5586 69.9
56785679
610.47.511.9
1210
2928/2910.5
12
5676
5654
56575656
69.9
10.4
11.9 7.5
66
9.9
5563
5587
564466
10.49.9
7.511.9
25/26
15/16
22/2318/19
10
12
10
10.5
12/13
15/1612/13
10
10.512
eH BD
eH BD
H e BD
eH BD
Ø15
Ø17
Ø15
B D
Ø15xD
e 1 mm
e hB D
09533 >
09495 >
885
885
15/16
12/13
12.5
10.5
7.5-8
6 min
11.9
9.9
09537 >
09536 >
885
885
15/16
18/19
12.5
14
7.5-8
9-9.5
11.9
13.2
Item number Zin
c
Dri
lling
fo
rd
ow
el
Cam
hei
ght
Pan
el
thic
knes
s
Dri
lling
d
epth
Cam3000
Technical andmounting details
PZ2 drive
Cam3000 Combined drive with HEX
Made of zinc2000 Pcs
Made of zinc2000 Pcs
Black available upon request
System 5Cams and DowelsØ15mm Cam3000
· Its optimised shape provides a more efficient cam profile with smooth tightening action and greater dowel pull-up
· Suitable for use with Combi dowels, forged steel dowels, and QuickfitTM TL4 dowels
· ‘Klix’ locking feature provides a strong, vibration proof joint· Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
9537
9533Ø15
eh
9537
9533Ø15
eh
9537
9533Ø15
eh
9537
9533Ø15
eh
Black available upon request
Cover caps > see page 41
Con
nect
ors
29
System 5Cams and DowelsØ15mm Cam3000 S
· Innovative design offers optimal performance with maximum cost effectiveness
· Suitable for use with Combi dowels, forged steel dowels and Quickfit dowels
· ‘Klix’ locking feature provides a strong, vibration proof joint· Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
Technical andmounting details
Made of zinc2000 Pcs
Cam3000 S/12 Philips PH2 drive
Item number
09646 >
9431
Ø14.8/14.9
59
Ø15
min
. 9.5
min
. 6
9.65.7
14.8 ±0.1
THIS PAGE LEFT BLANK INTENTIONALLY
30
5675
5677 1317.4
5658
5652
56598
6.512.410.9
9.5
11.5
13.915.9
2617.5
1311
12.519
23
14
16
16
5586 69.9
56785679
610.47.511.9
1210
2928/2910.5
12
5676
5654
56575656
69.9
10.4
11.9 7.5
66
9.9
5563
5587
564466
10.49.9
7.511.9
25/26
15/16
22/2318/19
10
12
10
10.5
12/13
15/1612/13
10
10.512
eH BD
eH BD
H e BD
eH BD
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mmD
5675
5677 1317.4
5658
5652
56598
6.512.410.9
9.5
11.5
13.915.9
2617.5
1311
12.519
23
14
16
16
5586 69.9
56785679
610.47.511.9
1210
2928/2910.5
12
5676
5654
56575656
69.9
10.4
11.9 7.5
66
9.9
5563
5587
564466
10.49.9
7.511.9
25/26
15/16
22/2318/19
10
12
10
10.5
12/13
15/1612/13
10
10.512
eH BD
eH BD
H e BD
eH BD
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mmD
DB e
05657 >
05676 >
05678 >
16
17.9
19.4
22/23
25/26
28/29
885
885
885
11-11.5
12.5-13
14-15.5
Cam2000 Ø15
· Available in a variety of head, drive recess and board thickness versions to suit most applications
· Suitable for use with all Titus dowels· “Klix” locking feature provides a strong, vibration proof joint· Linear cam profile results in smooth, easy cam rotation and
dowel pull-up
Dri
lling
d
epth
Pan
el
thic
knes
s
Zin
c
Dri
lling
fo
rd
ow
el
Item number
Other finishes on request
Headed Cam2000 available upon request
Technical andmounting details
System 5Cams and DowelsØ15mm Cam2000
Made of zinc
500 Pcs (05676, 05678)2000 Pcs (05644, 05654, 05656)
1000 Pcs
5675
5677 1317.4
5658
5652
56598
6.512.410.9
9.5
11.5
13.915.9
2617.5
1311
12.519
23
14
16
16
5586 69.9
56785679
610.47.511.9
1210
2928/2910.5
12
5676
5654
56575656
69.9
10.4
11.9 7.5
66
9.9
5563
5587
564466
10.49.9
7.511.9
25/26
15/16
22/2318/19
10
12
10
10.5
12/13
15/1612/13
10
10.512
eH BD
eH BD
H e BD
eH BD
Ø15
Ø17
Ø15
B
Ø15xD
E 1 mm
*05587 >
05653 >
05644 >
10min
10.9
12.7
12/13
12/13
15/16
6-6.5
6-6.5
7.5-8
885
885
8855675
5677 1317.4
5658
5652
56598
6.512.410.9
9.5
11.5
13.915.9
2617.5
1311
12.519
23
14
16
16
5586 69.9
56785679
610.47.511.9
1210
2928/2910.5
12
5676
5654
56575656
69.9
10.4
11.9 7.5
66
9.9
5563
5587
564466
10.49.9
7.511.9
25/26
15/16
22/2318/19
10
12
10
10.5
12/13
15/1612/13
10
10.512
eH BD
eH BD
H e BD
eH BD
Ø15
Ø17
Ø15
B
Ø15xD
E 1 mm
*Ultraflat - specially designed for thin panels (does not work with TL dowels)
05654 >
05656 >
12.7
14
15/16
18/19
7.5-8
9-9.5
885
885
Cover caps > see page 41
Con
nect
ors
31
*Ultraflat - specially designed for thin panels (does not work with TL dowels)
05575 >10 min12/13 885
eB
Ø12 x D
D
Ø12 Ø12
Ø14
1 mm
Ø12 Ø12
Ø14
1 mm
DB
6-6.5
e
System 5Cams and DowelsØ12mm Cam2000
Cam2000 Ø12
Made of zinc
· Suitable for all Titus screw-in dowels· Available in a variety of head, drive recess and board
thickness versions to suit most applications· Particularly suited to drawer front attachment applications· ‘Klix’ locking feature provides a strong, vibration proof joint· Linear cam profile results in smooth, easy cam rotation and
dowel pull-up
Dri
lling
fo
r d
ow
el
Zin
c
Dri
lling
d
epth
Pan
el
thic
knes
s
Item number
Other finishes on request
Technical andmounting details
2000 Pcs
eB
Ø12 x D
D
Ø12 Ø12
Ø14
1 mm
5675
5677 1317.4
5658
5652
56598
6.512.410.9
9.5
11.5
13.915.9
2617.5
1311
12.519
23
14
16
16
5586 69.9
56785679
610.47.511.9
1210
2928/2910.5
12
5676
5654
56575656
69.9
10.4
11.9 7.5
66
9.9
5563
5587
564466
10.49.9
7.511.9
25/26
15/16
22/2318/19
10
12
10
10.5
12/13
15/1612/13
10
10.512
eH BD
eH BD
H e BD
eH BD
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mmD
05389 >10 min12 6 885Cam2000 Ø12 headed
Other finishes on request
drop on
side entry drop on
side entry
System Features
A face boring connector family for 32mm system drilling with full range of panel and application variants for all cabinet manufacturing applications
· Minimum drilling requirements· Linear cam design for constant
tightening loads when driving· Angle drive feature on cam for
maximum driving comfort· Interchangeable pins for wood,
plastic and steel applications · Pins with Twinstart drive for fast
insertion· Interchangeable Quickfit™ dowel
fastenings available· Toolless fastening capable versions· Back-to-back fastenings for
common vertical panel fixing of shelves
System 6 consists of a range of 20mm diameter housings, Quickfit™ and conventional dowels, end dowels and double ended dowels.
Housings are made from high grade plastic or zinc, with zinc cams.
Wedgefix-6 connector is a special fastener without cam, simply to snap onto a pre-inserted dowel.
System 6Quickfit™ Connectors
Side-entry insertion of shelf panel: from the side or from the top
Drop-on insertion of shelf panel: only from the topUsing drop-on connections allows for one-man installation
Side-entryDrop-on
Applications Titus System 6 is ideal for use in high volume production of case goods, closet and garage storage systems. Because no edge boring is required, it is an excellent choice for manufacturing environments with limited drilling capacity.
32
Con
nect
ors
Outrigger Non outriggerOutrigger/Non outrigger
System Features
The angle drive feature on the cam allows for the angled position of the screwdriver with the locking action creating a tight and secure joint.
1. Press the housing into face board 2. Press the dowel into side panel
3. Assemble the panels 4. Tighten the joint
Angle drive feature
Assembly
33
34
System 6QuickfitTM DowelsDowels
· For panel-to-panel and back-to-back applications· Suitable for applications with all Titus Ø20 and/or
Ø25mm System 6 housings· Depth stop collar for accurate insertion
Item number Dar
k g
rey
Technical andmounting details
06408 > 880
Ø5 x 12.5
Ø8 x 12.5
Ø5 x 7.5
Ø10 x 12.5
Dowel Ø5
Made of zinc, plastic5000 Pcs
Zin
c
Zin
c P
late
d S
teel
C
Dri
lling
leng
th
for
do
wel
thr
ead
Ø5 x 12.5
Ø8 x 12.5
Ø5 x 7.5
Ø10 x 12.5
06479 > 880
Made of zinc, plastic5000 Pcs
Ø5 x 7.5 back-to-backapplications
8.5
17
Ø5.8
Ø3.6
Ø5
5000 Pcs Made of zinc or steel
06401 >
06402 >
06406 >
Ø5xC
Ø5x8
Ø5x12
M4x7.5
Ø5x11.5
Ø3 max
9
8
11.5
Dowel 885
885
885
883
883
InsertsMade of plastic
Twinstart thread 02182-846
10000 Pcs
Con
nect
ors
35
1.5
Ø9.5
Ø4.8
Ø4.8
Ø4.8
Ø5.8
Ø4.8
Ø5.8
Ø5.8
64846484
6389
1.5
Ø9.5
Ø4.8
Ø4.8
Ø4.8
Ø5.8
Ø4.8
Ø5.8
Ø5.8
64846484
6389
1.5
Ø9.5
Ø4.8
Ø4.8
Ø4.8
Ø5.8
Ø4.8
Ø5.8
Ø5.8
64846484
6389
B
Ø5 x thru
B
System 6Quickfit ConnectorsDouble-ended Dowels End Dowels
Pan
el
thic
knes
s
Item number Z
inc
Made of zinc
Double-ended dowel
Double-ended dowel
Double-ended dowel
· For 16mm, 18mm and 19mm board· Suitable for applications with all Titus Ø20mm and/or
Ø25mm System 6 housings
Technical andmounting details
SYS0606736/APP
06412 >
06415 >
16
19
885
885
1.5
Ø9.5
Ø4.8
Ø4.8
Ø4.8
Ø5.8
Ø4.8
Ø5.8
Ø5.8
64846484
6389
Ø5 x thru
B
End dowel
Made of zinc
Made of zinc
Made of steel
2500 Pcs
2000 Pcs
06414 >
06416 >
16
19
885
885
06389 >19 883
06484 >19 885
Ø5 x thru
B
Ø5 x thru
B
Zin
c P
late
d S
teel
36
06381 >
06385 >
H E
24
24
H E
drop on
side entry
835
835
898
898
841
841
835
835
882
882
898
898
841
841
877
877
861
877
877 861
15/16
18/19
7.75
9.25
B
12.5
14
D
H E
24
24
H E
drop on
side entry
H E
24
22
H E
drop on
side entry
06383 >
06387 >
15/16
18/19
7.75
9.25
15/16
18/19
7.75
9.25
12.5
14
12.5
14
Bla
ck
Lig
ht g
rey
Bro
wn
Alm
ond
Whi
te
Silv
er
Nic
kel
pla
ted
Pan
el
thic
knes
s
System 620mm Knock-in Housing Non-outrigger
Side-entry
Item number
Made of plastic
Made of plastic
Made of zinc
Drop-on
Drop-on
· Available in 15mm/16mm and 18mm/19mm versions for drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options· ‘Klix’ locking feature provides a strong vibration proof
connection· Compatible with all screw-in and QuickfitTM System 6 dowels
Dri
lling
d
epth
Other colors on Request
2500 Pcs
2500 Pcs
500 Pcs
Technical andmounting details
Other colors on Request
Cover capsMade of steel
>see page 41
847
847
Ø20 x D
9.5
Be
06447 >
06449 >
e
Ø20 x D
9.5
Be
Ø20 x D
9.5
Be
Con
nect
ors
37
Be D
06395 >18/199.25 14
06439 >
06397 >
898
898 882
877
877
15/16
18/19
7.75
9.25
12.5
14
H 22 22E
32 32
H E
H 22 22E
32 32
H E
Pan
el
thic
knes
s
System 620mm Knock-in Housing Outrigger
Item number
· Available in 15mm/16mm and 18mm/19mm versions for drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options· Compatible with all screw-in and QuickfitTM System 6 dowels
Dri
lling
d
epthTechnical and
mounting details
Drop-on
Made of plastic
Side-entry
1250 Pcs
835
835
835
898841
841
841
877
Bla
ck
Lig
ht g
rey
Bro
wn
Alm
ond
Whi
te
Other colors on Request
Other colors on Request
861
Silv
er
9.532
Ø20 x DØ10 x 10.5
Be
9.532
Ø20 x DØ10 x 10.5
Be
H 22 22E
32 32
H E
06455 >
06457 >
847
847
12.5
14
7.75
9.25
Drop-on
1250 Pcs Made of plastic
Made of zinc500 Pcs
Nic
kel
pla
ted
9.532
Ø20 x DØ10 x 10.5
Be
38
06473 >
06465 >
877
877
06471 >
06472 >
877
877
Ø20 x D
9.5
Be
22
22
Ø20 x D
9.5
Be
15/16
18/19
15/16
18/19
B
835
835
898
898
835
835
898
898
12.5
14
12.5
14
D
Pan
el
thic
knes
s
System 6Wedgefix Housing (no Inner Cam)
For use with screw-in dowels
2500 Pcs
Item number Whi
te
Made of plastic
Made of plastic
For use with QuickfitTM
dowels
2500 Pcs
· Available in 12mm, 15mm/16mm and/or 18mm/19mm versions for Quickfit-6 and/or Standard Dowel applications
· Available in a variety of plastic colors· Wedgefix-6 housing allows easy customer hand-assembly
or factory automated insertion· When used with Quickfit-6 dowels this provides a true
toolless fastening system
Bla
ck
Dar
kb
row
n
Dri
lling
d
epth
Other colors on request
Other colors on request
Technical andmounting details
Con
nect
ors
05409 > 885
05410 > 885
B
34
Ø8
Ø20xB/2+6
B/2B
B 10
13
B
18
18 min
15B
B/2
500 Pcs
500 Pcs
System 7Heavy Duty Ø20mmCam and Dowel
Cam Ø20
Dowel Ø7Ø10 mm thread
Made of zinc
Made of zinc
· Dowel available with Ø10mm eurothread and cam available in Ø20mm for a variety of panel thicknesses
· ‘Klix’ locking feature provides strong, vibration proof joint· High strength product that eliminates the need for time
consuming metal inserts
Technical and mounting details Item number Z
inc
Pan
el
thic
knes
s
39
05971 > 883
05960 > 885
05917 > 885
34
Ø7-8
7.5/9
Ø15x12.5/1434
Ø7-8
7.5/9
Ø15x12.5/14
34
Ø7-8
7.5/9
Ø15x12.5/14
Prekrivanje
Zin
c
1000 Pcs
1000 Pcs
2500 Pcs
System 7High Strength ConnectorsContract Fix™ System
M6 Dowel 7x34
Housing cylinder 15x12
Made of steel
Made of zinc
Made of zinc
Grub screw
· High performance fastener· Thread design gives repeatability· Multi-drive recess· Higher than average pull up
Item number Zin
c P
late
d S
teel
Technical and mounting details
InsertsMade of zinc
5000 Pcs
408.3391.600
40
Con
nect
ors
41
01029 > 831 835 867 8773.3
X
Bla
ck
Lig
ht b
row
n
Accessories for ConnectorsCover Caps
· Available in a variety of colors· Suitable for use with pozi and cam drive features· Suitable for use with various diameter cams· Both domed and flat versions available
Item number Dar
k b
row
n
Other colors on request
Technical andmounting details
Suitable for cams with Pozi 2 recess
Whi
te
Nic
kel f
rost
Ø29.5
Ø17
X
Ø17
2.5
Ø3.2
Ø4.2
25000 Pcs
Cover capØ17
Made of plastic
09630 >
06936 >
831 835 877
896
Ø17
Ø17
X
Ø17
2.5
Ø3.2
Ø4.2
6,5
27
Cover capØ17
1000 Pcs
25000 Pcs
Made of steel
Made of plastic
For use with 09646 cam only
Cover caps for System 6
VisionThe world’s best engineering for precision components
Components· Dampers· Precision components
MissionTo provide manufacturers with components’ solutions that improve competitiveness
Furniture Hardware· Cabinet connectors· Concealed hinges· Soft closing systems· Drawers and drawer systems· Kitchen accessories· Furniture locks· Decorative
Titus Business Philosophies and Principles· Gain total knowledge of our
customers and their markets· Focus on identifying and
creating high volume component niches
· Meet our customers’ expectations with global consistency
· Build long term associations with customers, suppliers, colleagues and shareholders
· Invest in the abilites of individuals at every level
· Continuously enhance input efficiency and sustainability
Titus Group Strategy
Technologies
Furniture Hardware
Die casting
Tooling
Assemblysystems
Dampers
Connectors Drawers
Damped hinges
TitusonicFastFit
Damped components
Prec
isio
n C
ompo
nent
s
Technologies· Automation systems· Precision castings · Die cast technologies· Tooling· Ultrasound fastening technology· FastFit technology
42
Product DesignDesign and engineering of unique components
Manufacturing Technologiesto improve productivity and product quality
Manufacturing OperationsA wide array of technologies and services required for high volume production of precision components available in-house
‘Totally Integrated Engineering’
Prod
uct D
esig
nM
anufacturing Technologies
Manufacturing Operations
Precision components
Consistent and repeatable
product quality
Fast time-to-market Unique product advantages
43
Global playerWorldwide design, manufacturing and distribution capabilities
NZ Hardware
PT Titus Tekform Indonesia
Titus d.o.o. DekaniTitusPlus d.o.o.Lama Avtomatizacija d.o.o.
Titus Tool Company, Inc.TitusPlus Italia S.r.l.
TitusPlus Iberia S.L.U.
CRO-Lama d.o.o.
Titus Polska Sp. z o.o.
Titus Tool Company, Ltd. Titus International, Ltd.
Titus Furniture Fitting Trading (Shenzhen) Ltd.
Titus Tool Company Pte.
Titus Tekform Pty Ltd.
Titus Tool Company, Inc.
HeadquartersTitus International Ltd.325 Euston RoadLondonNW1 3AD, United Kingdom
AustraliaTitus Tekform Pty Ltd.Unit 1, 41-43 Whyalla PlacePrestons NSW 2170 Australia+61 2 9286 0007+61 2 9826 0074 Fax
NZ Hardware Enterprises Ltd.34 Waipareira AvenueHendersonAuckland, New Zealand+64 9 837 0886+64 9 837 8003 Fax
AsiaTitus Tool Co. Pte. Ltd.5004 Ang Mo Kio Ave 5Techplace II #04-01Singapore 569872+65 6383 3922+65 6383 3178 Fax
Titus Furniture Fitting Trading Shenzen Ltd.80B ShenFuBao Building 128Ronghua RoadFutian Free Trade ZoneShenzen ChinaPc 551238+86 755 8348 0916 +86 755 8359 2676 Fax
PT Titus Tekform IndonesiaTaman Tekno block L2 No. 6-7BSD Sector XI - Tangerang Selatan 15314Indonesia+ 62 21 75873578+ 62 21 75873574 Fax
Titus Polska Sp. z o.o.ul. Stefańskiego 17 APL-62-002 Suchy Las/PoznańPoland+48 61 811 5402 Phone/Fax+48 61 811 5684 Phone/Fax +48 61 821 9362
TitusPlus Italia S.r.l.Via Aquileia 9Frazione Olmi31048 San Biagio di Callalta (TV)+39 04 221 650 120+39 04 221 650 136 Fax
TitusPlus Iberia S.L.U.C/ Gran Bretanya 3408520 Les Franqueses del Valles (Barcelona)+34 938 715 404+34 938 605 498 Fax
AmericaTitus Tool Company, Inc.2800 156th Ave SESuite 135Bellevue, WA 98007USA800 762 1616 toll free+1 425 746 2080+1 425 746 2344 Fax
Titus Tool Company, Inc.11056 W. Addison StreetFranklin Park, IL 60131USA800 762 1616 toll free+1 425 746 2080+1 425 746 2344 Fax
EuropeTitusPlus d.o.o.Dekani 5SI-6271 DekaniSlovenia+386 566 90 213+386 566 90 205 Fax
Titus d.o.o. DekaniDekani 5SI-6271 DekaniSlovenia+386 566 90 213+386 566 90 205 Fax
Titus TechnologiesLama Avtomatizacija d.o.o.Dekani 5SI-6271 DekaniSlovenia+386 566 90 432+386 566 90 431 Fax
Titus Tool Company, Ltd.10 Blackburn Industrial EstateEnterprise WaySherburn in ElmetLS256NAUnited Kingdom+44 1977682 582+44 1977680 481 Fax
CRO-Lama d.o.o.Rakitska 10aRakitjeHR-10437 BestovjeCroatia+385 1 3323 033+385 1 3323 233 Fax
44
Titus Groupwww.titusplus.com
Titus Connectors 01.3 Eng, Jan 19
Your authorized dealer