connecting 2 computers without data switch
TRANSCRIPT
-
8/6/2019 Connecting 2 Computers Without Data Switch
1/17
How to Connect two computers
without a Data switch
Network cable
Presented by
Naveed FarooqAdmin Nidokidos Network
www.Nidokidos.org
Get Nidokidos Hosting Package | Join Nidokidos Group | Email Me | Facebook
http://www.naveedfarooq.com/http://www.nidokidos.org/http://nidokidos.gogvo.com/http://www.getnidokidos.com/mailto:[email protected]://www.facebook.com/naveedfarooq1http://www.facebook.com/naveedfarooq1mailto:[email protected]://www.getnidokidos.com/http://nidokidos.gogvo.com/http://www.nidokidos.org/http://www.naveedfarooq.com/ -
8/6/2019 Connecting 2 Computers Without Data Switch
2/17
What you need ?
1.Network (UTP)cable,
Buy UTP(CAT 5) cable for this connection .
Network card. (Ethernet card)
A net work card is vital hardware of your computer.It is installed in your computer by the manufacturer.
To check your hardware right click on My computer
Click properties, click the option of hardware
Click Device manager. There you can find the
option of Network Adapters
In this picture you can see (2)Two network cards
are installed in the same computer.
-
8/6/2019 Connecting 2 Computers Without Data Switch
3/17
PCI Network card
Built in network card
Network Card
Usually network card is installed in the
computer by the manufacturer.
Other wise you can purchase it from
market.
1.PCI Network card which is inserted inPCI slot.
2.Built in Network card.
3.USB Network card.
USB Network card
USB
Rj45
-
8/6/2019 Connecting 2 Computers Without Data Switch
4/17
Connecting the UTP cable to Network card
Put the connecter in the LAN port of the network cards of the bothcomputers and boot both the computers.
When the window will completely load on the computer it will showyou the connectivity of the two computers at the task bar .
Connectivity network icons
If the network card is not configured ,computer can show the promptmessage that (Cable is unplugged) at the task bar.
Cable is unplugged
-
8/6/2019 Connecting 2 Computers Without Data Switch
5/17
Network icons on the task bar
Note :-If the cable has crimped properly and the network card
has configured properly then you can view the network iconson the task bar.
If the cable is not crimped properly OR
The network card has not configured properly,
then we can view the prompt message at the task bar
A NetworkCable is unplugged .
-
8/6/2019 Connecting 2 Computers Without Data Switch
6/17
Configuring a net work card
First of all, double click on the
task bar where network icon is
located , Click on the Internet
Protocol TCP/IP Click on
properties and set theTCP/IP protocols as shown on
the next page .
Task bar
-
8/6/2019 Connecting 2 Computers Without Data Switch
7/17
TCP/IP of computer No .1 Computer No .2
PC No 1 PC No 2
-
8/6/2019 Connecting 2 Computers Without Data Switch
8/17
Sharing a folder/drive on a network
Choose a folder or drive and right click on the
folder and click on Sharing and security.
If you see the above prompt notice click on it and
then click on the Share this folder on the network
Click Ok to continue and then you will see that
icon of the folder has been changed.
Before sharing After sharing
-
8/6/2019 Connecting 2 Computers Without Data Switch
9/17
How to Search a shared folder/drive on a network
First, you have to search the computer to which you want toaccess on a network.
For example You have two computersNamed PC1 and PC2.
IP Address of PC1 IP Address of PC2
192.168.1.53 192.168.1.52
You had shared a folder name (Garden) on PC1 and now you want toaccess that folder from PC2.
From PC2 you see the desktop. There you can see icon of
My Network places , right click on it, click Search for computers
There enter the name of computer you want to find ( i.e. PC1)
-
8/6/2019 Connecting 2 Computers Without Data Switch
10/17
Computer has searched the PC1double click to open it.
(You can also make a shortcut to
this computer on your desktop. Rightclick on PC1, click create shortcut
-
8/6/2019 Connecting 2 Computers Without Data Switch
11/17
When you will click onPC1 you can view sharedfolder garden
-
8/6/2019 Connecting 2 Computers Without Data Switch
12/17
Search a computer by IP Address
You can also search a computer on thenetwork by giving exactly its IP
Address, The IP Address of PC1 is192.168.1.53.
Enter this IP address instead ofcomputer name.
-
8/6/2019 Connecting 2 Computers Without Data Switch
13/17
How you can find/Change the computer name
If you want to change computer
name click here
Right click on My computer, Click properties click on Computer Name there
you will see the computer name .You can also change the computer name by click
on ChangeEnter the new name and Click Ok and click Ok to restart.
-
8/6/2019 Connecting 2 Computers Without Data Switch
14/17
Sharing a printer on the network
Click Start Click Printer and faxes Right click on the printer which
you want to share. Click Sharing
-
8/6/2019 Connecting 2 Computers Without Data Switch
15/17
Circle Share this printerClick Ok and you willview the sharing mark onthe printer.
For example this printer is
installed on PC1 and nowyou want share this printeron the network.
First of all you have to
search the computer onwhich printer is installed.
-
8/6/2019 Connecting 2 Computers Without Data Switch
16/17
Double click on the printer icon
Click yes and network printer will beinstalled on your computer. Now if theprinter and PC1 computer is On you can
print your document from your computerjust you print from your own computer.
-
8/6/2019 Connecting 2 Computers Without Data Switch
17/17
This Slide Show is brought to you by NidoKidoS Group
To Receive more, send an email to
Or Join us from website atwww.GetNidoKidoS.Com
Also you can participate in our Discussion Forums at
www.NidoKidoS.Org
*Nidokidos is just sharing this file. all rights are reserved by the respective authors of this presentation.
mailto:[email protected]://www.getnidokidos.com/http://www.nidokidos.org/http://www.nidokidos.org/http://www.getnidokidos.com/mailto:[email protected]