conlift tilt up
TRANSCRIPT
Solutions forP R E C A S T
C I V I L P R E C A S T
T I L T - U P
2
Parchem Construction Supplies brings together industry leading brands with a strong commitment to service and technical support.
Construction ProductsParchem offers a broad range of products and technologies to the civil engineering, industrial and commercial industries.
Equipment & ToolsSpecialising in light construction equipment, the innovative design and technical expertise make the range of products the leading choice for professional contractors.
Decorative Surfaces Whether building or renovating, the range of stamp, stencil, coloured concrete and internal flooring products provide innovative solutions to suit any house style or design.
Trade Stores The Parchem Construction Supplies stores offer not only convenient distribution for the complete Parchem product range but also provide a comprehensive range of additional product lines making it your complete trade store.
3
Introducing Conlift - a quality lifting system imported by Parchem. Conlift has been designed using cutting edge technology in the USA and provides value and a safer alternative to concrete lifting.
At Parchem we are not just a supplier of products, we pride ourselves on partnering with our customers in all facets of the construction industry, from engineering and drafting advice to planning, preparation, rigging, lifting and bracing, in a safe and efficient manner.
The advantages of ParchemThe major advantage Parchem offers over our competitors is the fact that we stock a comprehensive range of additional products. All products are available from one place through our trade stores making it easier for you to complete your projects on time every time.
At Parchem we work with our customers to ensure their needs are met with high quality products.
Parchem provides you with industry leading brands such as Flextool, Fosroc, Emer-Clad, Emer-Seal ....
We have convenient trade stores making it easier for you to get all the products you need from one convenient location.
CONLIFT IS A COMPREHENSIVE PRODUCT RANGE
SUITABLE FOR THE FOLLOWING
MARKETS:
PRECASTCIVIL PRECAST
TILT-UP
www.parchem.com.au
For more information about our product range go to www.parchem.com.au
4
SafetyAll products are strictly manufactured to industry standards. Our products have been designed to adhere to AS 3850.
ResponsibilityWe stand behind our products and our Parchem staff are extensively trained in all aspects of the Tilt-Up industry.
Project PlanningParchem offer a complete turn-key solution for your Tilt-Up project from our engineers, drafts-people to our technical sales people, we allow you to concentrate on your core business while we concentrate on ours.
INDEPENDENT ENGINEERING, DRAFTING ADVICE AND CERTIFICATIONOur skilled team of engineers can provide advice on Tilt-Up and Precast applications providing designs for lifting points, rigging and temporary bracing.
Our drafts people can provide shop drawings quickly and efficiently.
Our customer service representatives welcome your order and provide next day delivery.
We can provide the following services:• Shop drawing
• Project take off
• Product advice
• Daily delivery
INDUSTRY RESPONSIBILITY Our aim is to work with our customers in reducing risk through our industry experience and product performance.
5
Conten tsPreplanning 6
Working Panel Design Service 6
Lifting Design and Certification Service 6
Prop/ Bracing Design Service 6
Project Take Off Service 6
Ordering and Delivery 6
Casting Slab Preparation and Production 7-8
Set out tools 7
Reinforcing 7
Power Tools 7
Slab Underlay 8
Star Pickets 8
Mesh 8
Plastic Reinforcing, Mesh and
Ferrule Support Products 9-13
Slab on Ground Chairs 9
Clip on Mesh Support 10
Panel & Bar Chairs 10
Intersection, Rocket Chairs 11
Key Joint 12
Rebox 12
Formwork 12
Fillets & Mockjoints 12
Double Sided Tape 13
Shears 13
Xmas Trees 13
Formliners 13
Concrete Lifting Systems 14-15
Civil Precast 16-18
Ferrules and Accessories 19-21
Grout Tubes 22
Cast-in Plates 23
Polystyrene 23
Formwork 24
Chemicals 25
Curing Compounds 25
Form Release Agents 25
Sealants 26
Sprayers 26
Erection and Installation 27
Connections 27
Bracing of Panels 28
Levelling and Panel Placement 29
Lifting Plate 29
Panel and Building Completion 30-32
Grouting and Epoxy 30
Patching 30
Caulking 31
Waterproofing 32
Tools and Equipment 33
Notes Page 34-35
6
PREPLANNING
WORKING PANEL DESIGN SERVICEParchem provides a design service to produce Shop Drawings from the Engineers’ Drawings and Specifications.
LIFTING DESIGN AND CERTIFICATION SERVICEParchem provides a design service to produce Certified Lifting Designs for each Shop Drawing.
PROP/ BRACING DESIGN SERVICEParchem provides a design service to produce Certified Bracing & Deadman Designs for each Shop Drawing.
PROJECT TAKE OFF SERVICEThe experienced team at Parchem can provide a Project Take Off service to produce an economical product list to meet the requirements of the job.
ORDERING AND DELIVERYThe experienced team at Parchem Super Trade Stores will efficiently take your phone order or you can email or fax it through to your well stocked branch. For a delivery fee, your goods will be delivered the next day if the order is placed and stocked by 3pm the day before.
7
SET OUT TOOLSLasers
Measuring and Marking Markal B CrayonsSpray’N MarkTape MeasureChalk Line and ChalkString Lines – 50m, 100m, 500mCarpenters Pencils
CASTING SLAB PREPARATION AND PRODUCTION
REINFORCINGPerimeter Bar 16mm Deformed BarLaps 16mm Deformed Bar CornersCorner Reinforcing 16mm Deformed Bar 500mm long
Accessories Tie Wire Packs – 1.5kg Loop Tie Rolls 110mm, 125mm 150mm, 200mm Knipex Nippers Wire Twitchers Foundation Pegs 16mm x 600mm, 16mm x 900mm
POWER TOOLSGrinder – Electric and cordlessDriver Drill– Electric and cordlessHammer Drill– Electric and cordlessImpact Wrench– Electric and cordlessElectrical CordsAccessories
8
Slab Underlay The concrete underlay membrane will prevent moisture from penetrating beneath the slab. This prevents damage to internal floor coverings from rising damp and mould.The Polyethylene film that is used is made especially for the Australian building industry and conforms to Australian Standards AS2870, AS4347.6 and AS1326
Star Pickets Black & Galv
MeshRibbed square mesh - to AS4671
General Purpose Black has an Impact Resistance (IR) rating of IR2 for standard soil conditions. Orange IR3 has high impact resistance for areas of extreme soil movement.
Code Colour Size Thickness Pack Qty
GD-FILM Black IR2 4M X 50M 200Um 1
GD-FILMO633200 Orange IR3 6M X 33M 200Um 1
GD-FILMO450200 Orange IR3 4M X 50M 200Um 1
Code Description Pack Qty
BARG GUARD BAR 36mm BAR+S/PICKETS 100/BAG 100
WW-10751 STAR PICKET BLACK 450mm 400
WW-10752 STAR PICKET BLACK 600mm 400
WW-10753 STAR PICKET BLACK 900mm 400
WW-10754 STAR PICKET BLACK 1350mm 400
WW-10759 STAR PICKET BLACK 1500mm 400
WW-10755 STAR PICKET BLACK 1650mm 400
WW-10756 STAR PICKET BLACK 1800mm 400
WW-10758 STAR PICKET BLACK 2400mm 200
WW-10764 STAR PICKET GALV 1350mm 400
WW-10765 STAR PICKET GALV 1650mm 400
WW-10766 STAR PICKET GALV 1800mm 400
WW-12201 STAR PICKET DRIVER 800mm 20
WW-12202 STAR PICKET DRIVER 1200mm 20
Other sizes, Colours (clear, black & orange) and thickness available
Code Product ID Length Width Longitudinal Wires Spacing Cross Wires Mass (kg) Pack Qty
MSSL53 SL53 6000 2300 4.75 300 4.75 16.35 SHT
MSSL63 SL63 6000 2300 6 300 6 21.9 SHT
MS3031 SL52 6000 2400 4.75 200 4.75 24.06 SHT
MS3001 SL62 6000 2400 6 200 6 33 SHT
MS3003 SL72 6000 2400 6.75 200 6.75 40.79 SHT
MS3010 SL81 6000 2400 8 100 8 104.6 SHT
MS3005 SL82 6000 2400 8 200 8 52.32 SHT
MS3006 SL92 6000 2400 8.55 200 8.55 65.52 SHT
MS3045 SL102 6000 2400 10 200 10 80.27 SHT
Stock lengths and processed bar available
9
PLASTIC REINFORCING, MESH AND SUPPORT PRODUCTS
CodeHeight
Pack QtyA B
BPDS15/20 15 20 100
BPDS25/30 25 30 100
BPDS35/40 35 40 100
BPDS45/50 45 50 100
Bottom Deck ChairsThe bottom deck chair has been designed to support both the bottom mesh and large bars in suspended decks, precast beams, panels and Tilt-Up applications.
Code Cover Pallet Qty
BSOG110C 110 3200
BSOG120C 120 2800
BSOG130C 130 2800
BSOG140C 140 2400
BSOG150C 150 2400
Packed in bags of 100, or bales of 1000.All dimensions are nominal and expressed in millimetres.
Slab on Ground Bar Chairs Tall
Code Size
RB-TH20 20 to 400mm
Base Plates (To suit Wire Chairs)
Wire Chair (3 & 4 Leg Plastic Tipped)
CodeCover
Pack QtyA B
BC25/40 25 40 100
BC50/65 50 65 100
BC75/90 75 90 100
BC85/100 85 100 100
Slab on Ground Chairs
Clip-on
SOG Clip-On
BA
Code Cover (A/B) Pack Qty
BC50/65C 50/65 100
Code Cover (A/B) Pack Qty
BCSOG50/65C 50/65 100
Code Size
RB-BP140 140mm
Code A B Pack Qty
BPDST65/75 65 75 50
BPDST90/100 90 100 50
BPDST110/120 110 120 50
BPDST130/140 130 140 50
BPDST150/160 150 160 50
BPDST170/180 170 180 50
BPDST190/200 190 200 50
Top Deck ChairsThe top deck spacer has been designed to support both top mesh and top reinforcing bars in suspended decks, thick precast and Tilt-Up panels and any tall spacer applications, where strength and stability is critical.
Code Cover Pack Qty
BCBASE130 130 x 2mm 100
BaseTurns the Top Deck Chair or BDK Chair into a slab on ground chair.
B
A
10
Code Cover Pack Qty
FCM20 20mm 100
FCM25 25mm 100
FCM30 30mm 100
FCM35 35mm 100
FCM40 40mm 100
FCM50 50mm 100
FCM60 60mm 100
FCM65 65mm 100
FCM75 75mm 100
Code Cover Pack Qty
FCMX25 25mm 100
FCMX30 30mm 100
FCMX50 50mm 100
FCMX60 60mm 100
FCMX65 65mm 100
FCMX70 70mm 100
Code Cover Pack Qty
FCBASE015 +15mm 100
FCBASE025 +25mm 100
Code Cover Pack Qty
FCBASE +2mm 100
Fast Clip On Mesh Supports Fcm’sA versatile range of fast clip-on chairs for mesh support. FCM’s are available in a wide range of cover sizes with extensions and bases to 170mm. The chair is designed to clip easily to the intersection of the mesh, providing greater strength and stability. ideal for tilt-slab, precast panel and suspended deck applications. Bases of both 15 or 25mm can be used to increase cover and stability and minimise exposure. Flat circular bases of 80mm diameter are also available for slab on ground applications.
Fast Clip On Mesh & Bar Chair Extensions
Bases (To Suit FCB’s and FCM’s)
Slab On Ground Bases
20 to 75mm
Code Pack Qty Pallet Qty
BCPANEL50/60 100 5000
BCPANEL65/75 100 5000
Panel ChairsHas been designed to support single layered mesh in Tilt-Up, precast panels and some suspended deck applications. The chairs provide covers of 50mm, 60mm and 65mm, 75mm to suit popular panel thicknesess of 100mm, 120mm, 130mm, 150mm and 170mm.
50 or 60mm
65 or 75mm
Pictured with base
15 to 25mm
60mm
Code Cover Pack Qty
FCB15 15mm 100
FCB20 20mm 100
FCB25 25mm 100
FCB30 30mm 100
FCB35 35mm 100
FCB40 40mm 100
FCB45 45mm 100
FCB50 50mm 100
FCB60 60mm 100
FCB65 65mm 100
FCB75 75mm 100
Fast Clip On Bar ChairsSmall Head 4mm - 20mm bar.
Cover
30mm
25 to 70mm
11
Order Code Colour CoverMass
per bag kg
STROCK15 Red 15 3.0
STROCK20 Green 20 3.5
STROCK25 Brown 25 4.0
STROCK30 Yellow 30 4.5
STROCK35 Blue 35 5.0
Rocket ChairsColour coded by height, this unique design clips firmly to the mesh in either horizontal or vertical applications to provide accurate cover. Ideal for use in pipes, tanks and a variety of concrete products.
The rocket chairs narrow base reduces exposure and can accommodate light mesh up to 5mm.
Packed in bags of 1000. All dimensions are nominal and expressed in millimetres
COVER
Code Height “h”
Mass kg Per 100
Pallet Qty
BDR025 25 16.3 2000
BDR030 30 17.5 1700
BDR035 35 19.0 1700
BDR040 40 20.0 1500
BDR045 45 21.5 1500
BDR050 50 22.6 1300
BDR055 55 24.1 1300
BDR060 60 25.4 1200
BDR065 65 26.5 1200
BDR070 70 27.9 1100
BDR075 75 29.1 1100
BDR080 80 30.4 1000
BDR085 85 31.7 1000
BDR090 90 33.0 900
BDR095 95 34.0 900
BDR100 100 34.5 900
All dimensions are nominal and expressed in millimetres. All sizes are packed in bags of 25 pieces.
Deck Rails
750mm
72mm
h
Single SpacersThe use of spacers manufactured from fibre concrete ensures that the concrete cover specified for structures and structural elements made from reinforced concrete is adhered to, both before and during concreting.
For specific requirements please contact our nearest store.
Code Bar A Bar B a b c
BHD30IN 16&12 16 12 30 20 46
BHD35IN 16&12 16 12 35 20 51
BHD60IN 16&12 16 12 60 45 76
BHD65IN 16&12 16 12 65 45 81
BHD30IN 16&16 16 16 30 20 46
BHD35IN 16&16 16 16 35 20 51
BHD60IN 16&16 16 16 60 45 76
BHD65IN 16&16 16 16 65 45 81
BHD30IN 12&12 12 12 30 20 42
BHD35IN 12&12 12 12 35 20 47
BHD60IN 12&12 12 12 60 45 72
BHD65IN 12&12 12 12 65 45 77
Intersection ChairsThe heavy duty intersection chair was designed for the precast industry and the production of “SuperT Beams”.
The result is a design that takes advantage of the intersection to provide a chair that does not move. Clipped to both bars at the intersection, the chair is amazingly secure and will not swivel or turn, ideal in vertical applications. The chairs are currently designed to accommodate combinations of Y16 bars and Y12 bars. Designed and manufactured from quality plastic for optimum performance, the new chairs have been load tested to exceed 200kg.
*Other bar combinations are available subject to minimum production requirements, ie. 12 &16. Packed in bags of 100, or in bales. All dimensions are nominal and expressed in millimetres.
a
Bar A
Bar B
45mm
c
b
12
Fillets and MockjointsFillet is plastic extruded lengths of triangles used to create a chamfer on the panel edge. Mockjoint is an extruded trapezoid shape that forms a false joint.
Code Description Norm Size (WxH) mm Length Pack Qty
AC112WH3000 Fillet 12x12 3000mm 25 lengths/pk
FWFIL12T Fillet with Tail 12x12 3000mm 25 lengths/pk
FWFIL15T Fillet with Tail 15x15 2500mm 40 lengths/pk
AC115WH3000 Fillet (19) 15x15 3000mm 25 lengths/pk
MOD136WH3000 Mockjoint 40x12 3000mm 20 lengths/pk
MOD136WH4000 Mockjoint 40x12 4000mm 20 lengths/pk
Key JointSacrificial metal stay in place keyjoint system for on ground slabs, sold in lengths only, priced per each, price includes stakes. Permanent capping for metal keyjoint system, available in a range of colours, sold in rolls only.
Rebox®
Rebox® is a floor to wall reinforcing bar joining system. Unique dimpled galvanised steel rebate box stays in place eliminating the need for scabbling. Reboxes are made to specification with either 12 and 16 mm reinforcement bars. The reinforcing bars comply with AS3600.
Inner Formwork - Door & Window Forming1.6 Galvanised flashing with 22mm chamfer. The depth is marginally narrower than the standard 150, 175 and 200mm depth to allow for screeding.
FormworkPanel forming extruded aluminium section that is used to form up panels, both in the Precast and Tilt-Up sectors. It has a 22mm chamfer and comes in 5.8m lengths.
13
Code Description Size Pack Qty
DST4964CM12 Double Sided Tape 12mm x 50M 18/Box
DST4964CM20 Double Sided Tape 20mm x 50M 11/Box
DST4964CM24 Double Sided Tape 24mm x 50M 8/Box
DST4964CM32 Double Sided Tape 32mm x 50M 6/Box
DST4964CM37 Double Sided Tape 37mm x 50M 6/Box
DST4964CM50 Double Sided Tape 50mm x 50M 4/Box
DST4964CM100 Double Sided Tape 100mm x 50M 2/Box
DSGS58R Double Sided Glue Spot Rnd 58mm
DSGS45S Double Sided Glue Spot Sq 45mm
Double Sided TapePremium grade cloth coated with an aggressive natural rubber solvent adhesive. Ideally suited for the temporary fixing of Mockjoint to concrete to ensure the Mockjoint does not move during pour. Tape removes cleanly & can be torn by hand.
Code Description
SH-3104N Sheffield Fillet Shears
SH-SH3104A Replacement anvil
SH-3104B Replacement blades
Fillet ShearsFillet Shears are used to cut the Fillet and Mockjoint. The base plate with angle lines helps to mitre the corners.
FormlinersPatterned moulds are reflected in the lower face of the panel.Various designs and sizes are available on request.
Code Description Pack Qty
XMAS 6.5X36mm 100
Xmas Trees
14
CONCRETE LIFTING SYSTEMS
ConLift Face Lift Systems
Code To Suit Panel Thickness
Head Identification Box Qty
FLC5125 125mm Mushroom 16
FLC5150 150mm Mushroom 16
FLC5175 175mm Mushroom 16
FLC5200 200mm Mushroom 16
UNI-FLA05125 125mm Mushroom 40
UNI-FLA05150 150mm Mushroom 40
UNI-FLA05175 175mm Mushroom 30
UNI-FLA05200 200mm Mushroom 25
LER5 5T Remote Clutch
LE5 5T Clutch
ConLift Face Lifter (5 Tonne)
ConLift Plate Face Lifter (5 Tonne)
5T Face LifterLER5
LE5
LED57 Donut Clutch
ConLift Edgelift System
ConLift Edgelift Systems
ConLift Plate Edge Lift Anchor
Recess FormerBacking Plate
ConLift Donut Clutch 2-5T, 5-7, 10T
Code Description
EA25 Edgelift Plate Anchor Conlift 2.5T Galv
EA57 Edgelift Plate Anchor Conlift Orange 5-7T Galv
EA57M Edgelift Anchored Modified Orange 5-7T Galv
EA10 Edgelift Plate Anchor Conlift Blue 10T Galv
ConLift Edgelift Anchors
Code Description
RFRE25 RECESS FORMER RUBBER EDGELIFT 2.5T
RFRE57 RECESS FORMER RUBBER EDGELIFT 5-7T
RFRE10 RECESS FORMER RUBBER EDGELIFT 10T
RFBP25 RECESS FORMER BACKING PLATE 2.5T
RFBP5 RECESS FORMER BACKING PLATE 5T
RFBP10 RECESS FORMER BACKING PLATE 10T
RFBP22 RECESS FORMER BACKING PLATE 22T
ConLift Recess Formers And Backing Plates
Code Description
LEDC25 LIFTING EYE DONUT CLUTCH 2-5T CONLIFT
LEDC57 LIFTING EYE DONUT CLUTCH 5-7T CONLIFT
LEDC10 LIFTING EYE DONUT CLUTCH 10T CONLIFT
ConLift Clutches To Suit
15
Code Description Size
SBBN12 N12 900mm (90° at the apex, 90mm height of cog, 250mm flat leg)
SBBN16 N16 1675mm (90° at the apex, 90mm height of cog, 300mm flat leg)
Shear BarsInstalled across the edge anchor to increase shear load capabilities
dsi
dmin
L1
90°
50mm
Min 64 diam.pin typical
Min 64 diam.pin typical
M16 Bar
750mm
500mm
375mm 250mm
Code Description Size
TBBN16500 N16 1000mm (64° at the apex, 500mm leg, 250mm leg separation)
TBBN16750 N16 1500mm (64° at the apex, 750mm leg, 375mm leg separation)
Tension Bars Installed through the second hole to increase tension load capabilities
16
ConLift Eye AnchorEye Anchors are lifted by a Mushroom Head Clutch and provide greater pullout strength due to the straight or bent tension bar that is threaded through the Ring at the base of the anchor. Suitable for low MPa concrete and thin elements.
ConLift Foot AnchorFoot Anchors are lifted by a Mushroom Head Clutch. Suitable for low MPa concrete and thin elements.
Code Description L B D H
EA1350 1.3T x 50mm Eye Anchor 50 10 19 10
EA1355 1.3T x 55mm Eye Anchor 55 10 19 10
EA1365 1.3T x 65mm Eye Anchor 65 10 19 10
EA2590 2.5T x 90mm Eye Anchor 90 14 26 14
EA5090 5T x 90mm Eye Anchor 90 19 36 18
EA50120 5T x 120mm Eye Anchor 120 19 36 18
EA10180 10T x 180mm Eye Anchor 180 28 47 25
EA20250 20T x 250mm Eye Anchor 250 39 70 37
Code Description L B D C
FA13045 1.3T x 45mm Foot Anchor 45 10 19 25
FA13055 1.3T x 55mm Foot Anchor 55 10 19 25
FA13065 1.3T x 65mm Foot Anchor 65 10 19 25
FA13085 1.3T x 85mm Foot Anchor 85 10 19 25
FA13120 1.3T x 120mm Foot Anchor 120 10 19 25
FA13240 1.3T x 240mm Foot Anchor 240 10 19 25
FA25055 2.5T x 55mm Foot Anchor 55 14 26 35
FA25070 2.5T x 70mm Foot Anchor 70 14 26 35
FA25075 2.5T x 75mm Foot Anchor 75 14 26 35
FA25085 2.5T x 85mm Foot Anchor 85 14 26 35
FA25090 2.5T x 90mm Foot Anchor 90 14 26 35
FA25120 2.5T x 120mm Foot Anchor 120 14 26 35
FA25170 2.5T x 170mm Foot Anchor 170 14 26 35
FA25280 2.5T x 280mm Foot Anchor 280 14 26 35
FA5075 5T x 75mm Foot Anchor 75 20 36 50
FA5095 5T x 90mm Foot Anchor 95 20 36 50
FA5120 5T x 120mm Foot Anchor 120 20 36 50
FA5170 5T x 170mm Foot Anchor 170 20 36 50
FA5240 5T x 240mm Foot Anchor 240 20 36 50
FA10150 10T x 150mm Foot Anchor 150 28 47 70
FA10340 10T x 340mm Foot Anchor 340 28 47 70
FA20340 20T x 340mm Foot Anchor 340 38 70 98
FA20500 20T x 500mm Foot Anchor 500 38 70 98
CIVIL PRECAST
L
L
H
B
D
D
C
B
17
ConLift Steel Recess Formers And Rubber Rings To SuitReusable steel recess formers that can be either magnetic or standard. Attached to the formwork to create the void around the head of the foot or eye anchor.
ConLift Articulated Steel Recess FormersReusable steel recess formers that open up to allow easy insertion of the anchor. Attached to the formwork to create the void around the head of the foot or eye anchor.
ConLift Lifting ClutchReusable steel clutches that engage on to the head of the foot or eye anchor. Mushroom Head appearance.
Code Description
LE13 1.3T LIFTING EYE
LE25 2.5T LIFTING EYE
LE5 5T LIFTING EYE
LE10 10T LIFTING EYE
LE20 20T LIFTING EYE
LE5R 5T LIFTING EYE (REMOTE RELEASE)
Code Description
RFR13 RECESS FORMER RUBBER 1.3T
WN13 WINGNUT AND STUD 1.3T FOR RFR
EAP13 PLATE 1.3T FOR RFR
RFR25 RECESS FORMER RUBBER 2.5T
WN25 WINGNUT AND STUD 2.5T FOR RFR
EAP25 PLATE 2.5T FOR RFR
RFR5 RECESS FORMER RUBBER 5T
WN5 WINGNUT AND STUD 5T FOR RFR
EAP5 PLATE 5T FOR RFR
RFR10 RECESS FORMER RUBBER 10T
WN10 WINGNUT AND STUD 10T FOR RFR
EAP10 PLATE 10T FOR RFR
RFR20 RECESS FORMER RUBBER 20T
WN20 WINGNUT AND STUD 20T FOR RFR
EAP20 PLATE 20T FOR RFR
ConLift Rubber Recess Formers / Wingnut/ Studs And PlatesReusable rubber recess formers that can be attached to the formwork to create the void around the head of the foot or eye anchor.
Rubber Recess Former
Steel Recess Former
Standard Remote Release
Recess Former Complete With Foot Anchor
Recess Former with rubber
Wingnut and Stud Complete Former with Foot Anchor Inserted
Code Description
RFS13 RECESS FORMER ROUND 1.3T STEEL
RFRR13 1.3T RUBBER RING
RFS25 RECESS FORMER ROUND 2.5T STEEL
RFRR25 2.5T RUBBER RING
RFS5 RECESS FORMER ROUND 5T STEEL
RFRR5 5T RUBBER RING
Code Description
RFSA13 RECESS FORMER STEEL ARTICULATED 1.3T
RFSA25 RECESS FORMER STEEL ARTICULATED 2.5T
RFSA5 RECESS FORMER STEEL ARTICULATED 5T
18
Panel PadsPanel pads are useful in spacing concrete panels and the like for purposes of curing, storage, packing and shipping.
Code Description Pack Qty
PPAD Panel Pad 400
Code Description
DRR02 FOOT ANCHOR COVER PLATE 2.5T
DRR04 FOOT ANCHOR COVER PLATE 5T
Foot And Eye Anchor Cover Plates
Magnets
Code A B C
4CA14 14mm / 0.55” 160mm / 6.3” 80mm / 3.15”
5CA14 14mm / 0.55” 209.8mm / 8.26” 95mm / 3.74”
5CA18 17.8mm / 0.7” 220.5mm / 8.681” 95mm / 3.74
6CA14 14mm / 0.55” 268mm / 10.551” 120mm / 4.724”
6CA18 17.8mm / 0.7” 230mm / 9.055” 120mm / 4.724”
8CA18 17.8mm / 0.7” 312mm / 12.283” 171mm / 6.732
ConLift A-AnchorThe A-Anchor Lifting System is an economical system designed so that the anchor is used from the start of production to the placement on site of standard precast elements. Best of all without the need for any special lifting equipment or additional hardware. The use of a standard hook or clevis to connect the A-Anchor is all that is required for a safe lift. The A-Anchor eliminates through holes in precast elements.
ConLift Recess Formers To Suit A-Anchors
Product Code D E F
CRRF9014 228mm / 9” 76mm / 3” 82.55mm/3.25”
CRRF9018 228mm / 9” 76mm / 3” 82.55mm/3.25”
CRRF9014-4 228mm / 9” 76mm / 3” 101.6mm / 4”
CRRF9018-4 228mm / 9” 76mm / 3” 101.6mm / 4”
A-Anchor setting plate
Code Description
MAG50 MAGNET 50 x 15 x M12 x 1700 GAUSS
19
Code Description Pack Qty
PC125 PRECAST CHAIR 125MM 200
PC150 PRECAST CHAIR 150MM 200
PC175 PRECAST CHAIR 175MM 100
PC200 PRECAST CHAIR 200MM 100
Code Description Length Pack Qty
FECC34095 3/4 (Ferrules) 95mm 50
CB3465 3/4 (Bolt) 65mm 50
Coil Ferrules and Coil Bolts
FERRULES AND ACCESSORIES
Code Thread Length Thread Length Pack Qty
FEC12055 M12 55mm 20 100
FEC12095 M12 95mm 25 50
FEC16070 M16 70mm 32 25
FEC16095 M16 95mm 32 25
FEC20070 M20 70mm 35 25
FEC20095 M20 95mm 38 25
FEC24095 M24 95mm 50 25
ConFoot Ferrules Zinc, Galvanized and Stainless Steel
Code Thread Length Cross Hole to Suit
Thread Length
Pack Qty
FE12065 M12 65mm R8 20 50
FE12095 M12 95mm R8 25 50
FE16075 M16 75mm R10 32 50
FE16096 M16 96mm R10 32 50
FE20075 M20 75mm R10 35 50
FE20096 M20 96mm R10 38 50
Round Bar Ferrules Zinc, Galvanized and Stainless Steel
Zinc, Galvanized and Stainless Steel
Code Thread Min Thread Length Length To Suit
PanelPack Qty
FED16140 M16 32mm 140mm 150mm 25
FED16170 M16 32mm 170mm 175mm 25
FED16190 M16 32mm 190mm 200mm 25
FED20140 M20 38mm 140mm 150mm 25
FED20170 M20 38mm 170mm 175mm 25
FED20190 M20 38mm 190mm 200mm 25
Double Ended Ferrules
Precast ChairThe precast chair is used in conjunction with a 96mm CONfoot ferrule to produce the required height on the Near Face of a precast panel. It is concrete grey to blend in with the substrate and has small feet to limit exposure.
Requires N12 x 300 cross bars
Requires N12 x 300 cross bars
15mm
Code A B Pack Qty
FWSC125/96 125 96 50
FWSC150/96 150 96 50
FWSC175/96 175 96 50
FWSC200/96 200 96 50
Ferrule Support Chairs
B
A
Code Size
TICHAIR
ConBar Chairs
Codes Description Pack Qty
DBX12300 N12 x 300mm Deformed bar 20
Ferrule Cross Rods
20
Codes Description Pack Qty
TF1050 M10 x 50mm 100
TF1260 M12 x 60mm 100
TF1680 M16 x 80mm 100
TF16100 M16 x 100mm 100
TF2080 M20 x 80mm 50
Tube Ferrules
Crimped Cross-Hole Ferrules
Code Bar Type Length Pack Qty
CBR126 CB12 6 100
CBR166 CB16 6 100
CBR206 CB20 6 100
CBR256 CB25 6 100
CBR326 CB32 6 100
Code Foot Dia Length Pack Qty
CB12TI 38 100 75
CB16TI 50 118 30
CB20TI 64 148 25
CB25TI 80 191 6
CB32TI 101 201 5
Code Dia Length Hex AF
Pack Qty
CB12C 22 90 25 100
CB16C 30 102 30 60
CB20C 35 129 37 40
CB25C 43 180 45 20
CB32C 55 210 57 10
ConBar ReoContinuously threaded, hot rolled, Graded 500N reinforcing bar to AS4671. Achieves efficient continuous reinforcing throughout the whole job.
ConBar FerrulesInserts for casting into concrete, designed to accept Starter Bars with continuous ConBar thread at a later stage with sufficient embedment for a full strength bar break connection.
ConBar CouplersInternally threaded couplers for joining ConBar.
Cut to length or processed (Bent)
Note: Galvanised couplers available.
ConBar Antenna CapsDesigned to protect the threads on ConBar Couplers and Ferrules.
Code To suit ConBar Pack Qty
CB12NP CB12 100
CB16NP CB16 100
CB20NP CB20 100
CB25NP CB25 100
ConBar Nailing PlateConnects ConBar Couplers and Ferrules to formwork in facedown and horizontal applications.
Codes Description Pack Qty
TFB1260 M12 x 60mm 100
TFB1670 M16 x 70mm 100
TFB1690 M16 x 90mm 100
TFB2075 M20 x 75mm 50
TFB2090 M20 x 90mm 50
Codes Description
CB12WN CONBAR WING NUT CB12
CB16WN CONBAR WING NUT CB16
Bent End Ferrules
Conbar Wingnuts
Conbar Locknuts
Code Description
CB12N CONBAR LOCK NUT CB12
CB16N CONBAR LOCK NUT CB16
CB20N CONBAR LOCK NUT CB20
CB25N CONBAR LOCK NUT CB25
CB32N CONBAR LOCK NUT CB32
Code Description Pack Qty
FWACRB12 CAP FOR CB12 100
FWACRB16 CAP FOR CB16 100
CB20AC CAP FOR CB20 100
Code Length Pack Qty
CBSB12540 540 100
CBSB16660 660 100
CSSB20850 850 100
CBSB251150 1150 100
CBSB321450 1450 100
ConBar Starters BarsPre-cut bar connections for fast full strength reinforcing. Grade. 500N bar to AS4671.
21
Codes Colour Pack Qty
FWNP12 Red 100
FWNP16 Green 100
FWNP16A Lime Green 100
FWNP20 Blue 100
FWNP20A Lime Green 100
FWNP20C Brown 100
FWNP24 Yellow 100
Screw In Thick Nailing Plate – Nail OnScrews into the ferrule and mechanicallyfastened to the formwork. Popular sizes arealso available with built-in antennae for easylocation of plates after casting. Where coilthreaded ferrules are used at bracing locations, a special nailing plate is available.
A=Available with buit in antenna.C=Suits coil thread.
Codes Colour Size Pack Qty
FWGP12 Red 12mm 100
FWGP16 Green 16mm 100
FWGP20 Blue 20mm 100
FWGP24 Yellow 24mm 100
Glue-on PlatesConnects to formwork with double sided glue spots and screws into ferrule. The recess on the bottom side of the base allows for easy removal after the panels have been lifted.
Codes Pack Qty
FWFCAP20 100
Codes Colour Pack Qty
FWQF12 Red 100
FWQF16 Green 100
FWQF20 Blue 100
Ferrule Quick Fit LocatorPushes into the ferrule and releases when the panel is lifted. A special built-in seal prevents slurry leakage into the ferrule. The 45mm square base can be nailed, or will accommodate double sided tape, which can be cut from standard strips and Glue on Squares.
Ferrule Patch CapsConcrete grey patches that are inserted into 20mm ferrules, when props have been removed from the panels. Eliminates grouting of the ferrule holes, even if the ferrules are not perpendicular to the panel face
Code Description Pack Qty
GSPOT 58mm Dia (Approx) 1000
GSQ 45mm x 45mm 1000
Glue-on Spots & StripsStrong double sided adhesive approximately 1mm thick. Comes complete with backingstrips to allow pre-fixing to plates and locators.
Codes Colour Height Pack Qty
FWAC12 Red 12mm 100
FWAC16 Green 16mm 100
FWAC20 Blue 20mm 100
FWAC24 Yellow 24mm 100
Antenna CapsDesigned to protect the threads of ferrules while pouring and screeding while providing an effective seal through a tight push fit and a ridge which locks.
Code Description
FWPLATEBL BLUE 60/BAG
FWPLATEBR BROWN 60/BAG
FWPLATEG GREEN 60/BAG
FWPLATEO ORANGE 60/BAG
FWPLATER RED 60/BAG
FWPLATEW WHITE 60/BAG
FWPLATEY YELLOW 60/BAG
Panel Identification PlatesCast into panels for clear identification, specifications and quality control details. Available in several colours. 100 x 180mm.
22
Code Diameter Length Size Qty
SD4025 40 2500 576L/Pack
SD5025 50 2500 360L/Pack
SD6025 60 2500 330L/Pack
SD7525 75 2500 169L/Pack
SD8025 80 2500 144L/Pack
SD9025 90 2500 121L/Pack
SD4058 40 5800 576L/Pack
SD5058 50 5800 360L/Pack
SD6058 60 5800 330L/Pack
SD7558 75 5800 169L/Pack
SD8058 80 5800 144L/Pack
SD9058 90 5800 121L/Pack
FWPL50/60 Brown cap for 50 or 60mm 100
FWPCAP50 Blue cap for Ext 50mm 100
FWPL50 Red cap for Int 50mm 100
FWCAP50E Yellow cap for elbow 100
BFF5088 90° Elbow to suit 50mm Spiral Duct 100
SDE200 45° ELBOW to suit 50mm Spiral Duct 50
Metal Spiral Duct Grout Sleeve System*
Code Description Pack Qty
GT100EXT 100mm grout tube extension 100
GT200EXT 200mm grout tube extension 130
GTBC Universal Chair 200
GTEC Grout Tube End Cap 600
Moulded Plastic Grout Tubes Black Plastic Ribbed grout Tube System.250mm formed body and elbow. To suit 125, 150, 175, 200mm panel.
* Note: Also available in 2200mm length sizes.
Universal Chair
End Cap100mm Extention 200mm Extention
PVC Elbow
SDE200
Code Description Pack Qty
GT120 Formed Grout Tube Body and Elbow 120 Panel 100
GT150 Formed Grout Tube Body and Elbow 150 Panel 100
GT175 Formed Grout Tube Body and Elbow 175 Panel 100
GT200 Formed Grout Tube Body and Elbow 200 Panel 100
DonutsTo restrain the grout filling the Grout Tube
Code Size
2500640 120mm OD x 60mm ID x 45mm Thick
23
Code Description Height Plate Dimensions Bars Ferrule
CIPD202012 D Stirrup Cast In Plate 73mm above plate -85mm overall 200 x 200 x 12mm 2 N16 -
CIPD202012F1 D Stirrup Cast In Plate & Ferrule 73mm above plate -85mm overall 200 x 200 x 12mm 2 N16 M20 x 55mm Ferrule
CIP0202012LEG Edge Cast In Plate - 200 x 150 x 12mm 2 N16 x 300 Legs -
CIP0202012F1LEG Edge Cast In Plate & Ferrule - 200 x 150 x 12mm 2 N16 x 300 Legs M20 x 55mm Ferrule
Cast-in Plates
Manufactured to your Specifications.
Code Description Size Pack Qty
TP73108 Styrene Strips 120 x 145 x 2400 80
The 120mm side suits 150mm Panel thickness leaving 30mm of concrete cover
The 145mm side suits 175mm Panel thickness leaving 30mm of concrete cover
2201090 1.4 x 1.2m Sheets 10, 20, 50, 100mm
Styrene Pieces and Shapes are used to create Recesses and Architectural Detail
PolystyreneThe Styrene strip supports the Inner Formwork. The 30mm of concrete cover allows the downward face of the Panel above does not reflect the cutout. It is marginally shorter than the Edge Formwork so that it does interfere with the screeding and does not reflect in the Panel above. Styrene is also used to create rebates, angles and recesses
24
Code Description Size Lengths Pack Qty
LVLTF09504736 LVL 95 x 47mm 3600mm, 4800mm, 5400mm, 6000mm 88
LVLTF09506536 LVL 95 x 65mm 3600mm, 4800mm, 5400mm, 6000mm 66
LVLTF13007736 LVL 130 x 77mm 3600mm, 4800mm, 5400mm, 6000mm 40
LVLTF15007736 LVL 150 x 77mm 3600mm, 4800mm, 5400mm, 6000mm 35
Formply
LVL
FORMWORK
More timber sourced on enquiry
Code Description Size Pack Qty
PLY2412172F14 F14 good Two Sides 2400 x 1200 x 17mm 48
PLY1812172F14 F14 good Two Sides 1800 x 1200 x 17mm 46
PLYAF241217F17 F17 Good Two Sides 2400 x 1200 x 17mm 50
PLYAF181217F17 F17 Good Two Sides 1800 x 1200 x 17mm 60
PLYAF241225F27 F27 Good Two Sides 2400 x 1200 x 25mm 25
25
CHEMICALS
Code Size
SFRWB20 19L
SFRWB1000 1041L
ConLift Water Based Precast Steel Form ReleaseSteel to concrete release agent. Water based.
Concure X90 Promotes efficient cement hydration minimises shrinkage whilst increasing durability of the concrete surface. Concure X90 is suitable for curing all freshly laid concrete either smooth or textured, indoors or outdoors. Coverage 5m²/L.
CURING AGENT
Concure A99Water based acrylic curing compound – conforms to AS3799. Concure A99 is recommended for applications to the surfaces of concrete structures, including renders, structural and mass concrete, particularly in situations where other conventional means of wet curing are difficult to maintain. Coverage 5m²/L.
Code Size
900909 20L
909900 205L
900910 1000L
Code Size
SFRSB20 19L
SFRSB205 208L
ConLift Solvent Based Form ReleaseSteel to concrete releaseagent. Solvent based.
Code Size
900801 205L
900802 1000L
Code Size
BBWB20 19L
BBWB205 208L
ConLift Bondbreaker - Water BasedConcrete to concrete release agent. Curing agent as well. Water based.
26
Silicone/Gap FillerSealing of joints to prevent leakage.
Code Description Size
610332 Hilastic 88 Translucent Silicone 300gms
630100 Emerseal Silicone Grey 600ml
600395 White acrylic gap filler 300ml
Code Description
MH-SP20A 8 Ltr Polyethlene tank
MH-SP322 13 Ltr Polyethlene tank
MH-SP35C 13Ltr Polyethlene tank
SA6007 Chapin Premium Sprayer
AC4095 Dema 8Ltr Handheld Foamer
Curing Compounds: SP35CForm Release Agents: SP322/SP35CForm Oil: SP322/SP35CDiesel: SP322/SP35COil-based Sealers: SP35CWater-based Sealers: SP35CAcid Etching: SP20AMuriatic Acid: SP20 APhosphoric Acid: SP20AViscous Materials: SP20ABack Set: AC4095
Code Size
AC4093 500ml
AC4094 5Ltr
Back-SetTurns hard set up cement back into rinsable mud!Back-Set molecularly breaks down the ionic bond in Portland cement, completely dissolving and releasing the hardened cement from any surface to which it is adhered. Use Part # AC4095 Dema 8 Litre Handheld Foamer for applying
27
Code Description Size
DB16500 N16 500
DB16600 N16 600
DB20500 N20 500
DB20600 N20 600
Code Description Size Holes
FJP304210 Flat Joining Plate 300 x 420 x 10mm 4
FJP154210 Flat Joining Plate 150 x 420 x 10mm 2
CJP20203013 Corner Joining Plate 200 x 200 x 13 x 300mm 4 (2 in each face)
CJP20201513 Corner Joining Plate 200 x 200 x 13 x 150mm 2 (1 in each face)
BJ151512 Base Joining Plate 150 x 150 x 12 x 150mm 2 (1 in each face)
Code Type Description
TILT-STDG Standard Bracket (2 required) Formed 100 x 10 Grade 250 flat bar with 5 slots
TILT-CNRG Corner Bracket (1 required) Formed 100 x 10 Grade 250 flat bar with 4 slots
Code Description Size Pack Qty
SB12595 N12 595mm 20
SB16595 N16 595mm 20
SB20595 N20 595mm 20
Joining Plates for Panel to Panel Connection
Danley Tiltlock
Manufactured to your requirements. Galv & Black
Manufactured to your requirements. Galv & Black
Manufactured to your requirements. Galv & Black
Manufactured to your requirements. Galv & Black
Starter Bars Dowels to connect the panel to the slab, floor or stairs. They are deformed bar cut to length with a metric thread formed on one end. The thread is screwed into a ferrule cast into the panel and the remainder of the dowel is held in the slab, floor or stair concrete pour.
CONNECTIONS
ERECTION AND INSTALLATION
Code Description Size Box Qty
WSQMZ166552 M16 65 50
WSQMZ206552 M20 65 50
Code Description Size Box Qty
B88MZ160602 M16 60 50
B88MZ200602 M20 60 50
Square Plate Washers Bolts (Set Screws)Galvanized, Zinc and Black Galvanized, Zinc and Black
Accessories
DowelsDowels to hold the panel in place on the footing using the grout tube void. They are deformed bar cut to length and epoxied or cast-into the footings.
28
Push Pull Brace Hire
Strongback Hire
BRACING OF PANELS
Code Description Size
JB20400 M20 J Bolt M20 x 400
Code Description Size Box Qty
PW-PBI18-20/115 ANCHOR PBI Brace-IT M12x115mm 25
PW-PBI20-20/115 ANCHOR PBI Brace-IT M14x115mm 25
Code Description Size Box Qty
PW-PSA15-10/90 ANCHOR PBI structural M10x90mm 25
PW-PSA15-20/110 ANCHOR PBI structural M10x110mm 25
PW-PSA18-10/85 ANCHOR PBI structural M12x85mm 25
PW-PSA18-20/105 ANCHOR PBI structural M12x105mm 25
PW-PSA18-25/130 ANCHOR PBI structural M12x130mm 25
PW-PSA24-25/130 ANCHOR PBI structural M16x130mm 10
PW-PSA24-25/145 ANCHOR PBI structural M16x145mm 10
Code Description Size Box Qty
FECC34095 Coil Ferrule 3/4" thread x 95mm 50
CB3465 Coil Bolt 3/4 thread x 95mm 50
Code Description Size Box Qty
FE20096G Propping Ferrule M20 x 95mm 50
B88MZ200602G Set Screw M20 x 60mm 50
Prop BoltStructural Mechanical Anchors that are fixed into either the Deadman, Slab or Footing to form the connection at the base of the Brace and into the Panel to form the connection at the top of the Brace.
Coil Ferrule and BoltA Coil Ferrule is cast into either the Deadman, Slab or Footing and a Bolt with the matching thread is wound in to it to form the connection at the base of the Brace. A Coil Ferrule is cast into the Panel and a Bolt with a matching thread is wound in to it to form the connection at the top of the Brace.
PSA – Structural anchor Designed for structural applicationA Coil Ferrule is cast into either the Deadman, Slab or Footing and a Bolt with the matching thread is wound in to it to form the connection at the base of the Brace. A Coil Ferrule is cast into the Panel and a Bolt with a matching thread is wound in to it to form the connection at the top of the Brace.
Standard Ferrule and Set ScrewA Standard Ferrule is cast into either the Deadman, Slab or footing and a set screw is wound in to it to form the connection at the base of the Brace. A Standard Ferrule is cast into the Panel and a Set Screw is wound in to it to form the connection at the top of the Brace.
J BoltsRound or Deformed Bar Formed into a J with a Metric thread on the end for a Nut. They are cast into the Deadman and form the connection at the base of the Brace.
Manufactured to your requirements
Never drill deeper than 80% of the Panel thickness
Galvanised and Black
Code Description Length Closed Open Weight
TPPROP –MINI PROP HIRE MINI (35 -25kN) 2.6 to 4.4M 35kN 30kN 37kg
TPPROP-STANDARD PROP HIRE STANDARD (40 -14kN) 4.4 to 6.8M 40kN 14KN 53kg
TPPROP-STANDARD 1 PROP HIRE STANDARD 1 (40 -18kN) 4.35 to 7.0M 40kN 18kN 55kg
TPPROP-JUMBO PROP HIRE JUMBO (25 -6kN) 6.2 to 10.0M 25kN 6kN 78kg
TPPROP-JUMBO 1 PROP HIRE JUMBO 1 (30 -20kN) 6.4 to 11.5M 30kN 20kN 106kg
Code Description
TPSSX91800 STRONGBACK HIRE 1.8M
TPSSX92700 STRONGBACK HIRE 2.7M
TPSSX93600 STRONGBACK HIRE 3.6M
29
LEVELLING AND PANEL PLACEMENT
Code Panel Shim Thickness Colour Pack
Size
SHIM01 1mm Brown 100
SHIM02 2mm Blue 200
SHIM03 3mm Green 100
SHIM05 5mm Yellow 100
SHIM10 10mm Black 40
SHIM15 15mm Grey 40
SHIM20 20mm White 30
Shims Uniquely designed for packing underneath concrete tilt-up and precast panels having a non-skid surface. and tested with compressive loads of up to 20 tonnes.
Lifting PlateAvailable for Hire when a Face Lift Anchor is incorrectly placed, not cast in or is misplaced. It is rated at 5T and is fixed to the Panel in the certified position of the missing Anchor with 4 PBI18/102.
Tools and EquipmentHammer, Sledge HammerScrewdriverLadderFerrule Magnet to find Ferrules, Anchors and Plates in the concrete panelPower leadPower Board
300mm
Lifting Plate 20mm thick
20mm
100mm
26mm20mm
50mm
50mm
22mm
300m
m
40mm
Panel BarSprung steel blade gives additional leverage when moving a panel
Code Length
CPBAR 1425mm
Code Length
LP 300 x 300 x 20mm
Size: 150 x 100mm
30
GROUTING AND EPOXY
PATCHING
Accessories Hand TrowelsSander – Electric and Hand ToolSand PaperScrapers
PANEL AND BUILDING COMPLETION
Code Description
481015 Nitomortar 903 size 1.5 and 3L
620460 Nitomortar AP size 3L
620463 Nitomortar AP Base 15L pak
620464 Nitomortar AP Hardener 15L pak
ConLift GroutGeneral Purpose, Non-Shrink, Cementitious Grout is used to fill the voids, gaps and grout tubes.
2 Part Epoxy Resin BinderTwo component Eproxy for bonding, anchoring and repair.
Code Description Bag Size
302020 Renderoc HB40 20kg
Code Description Bag Size
302000 Renderoc FC 3mm 20kg
Code Description Bag Size
209015 Grey 10kg
209010 White 10kg
ConLift ConPatchA Light Weight One Pass Patching Mortar.
High Build MortarNon Sag Mortar for patching deeper concrete holes minimum thickness 10mm.
Fairing Coat MortarA Feather Mortar to cover 0-3mm holes and to blend repair mortar into the Panel.
Code Description
209000 Non Shrink Grout 20kg
31
CAULKING
Code Description Width Roll Length
665120 Expanda Foam Rod 6mm 250m
665121 Expanda Foam Rod 10mm 200m
665122 Expanda Foam Rod 13mm 100m
665123 Expanda Foam Rod 15mm 100m
665124 Expanda Foam Rod 20mm 60m
665125 Expanda Foam Rod 25mm 50m
665126 Expanda Foam Rod 30mm 50m
665127 Expanda Foam Rod 40mm 2m/strip
665128 Expanda Foam Rod 50mm 2m/strip
665200 Emer-Seal Backing Rod 16mm x 150m Roll 20 Lengths/bale
665201 Emer-Seal Backing Rod 22mm x 100m Roll 15 Lengths/bale
665202 Emer-Seal Backing Rod 29mm x 60m Roll 15 Lengths/bale
665203 Emer-Seal Backing Rod 38mm x 30m Roll 15 Lengths/bale
665204 Emer-Seal Backing Rod 50mmx 20m Roll 15 Lengths/bale
Code Description Fire Rating Size Box Qty
620525 Emer-Seal PU25 Non 600ml 20
620600 Emer-Seal PU40 Non 600ml 20
620035 Flamex PU Yes 600ml 12
620025 Flamex One Acrylic Yes 600ml 20
600406 Emer-Seal Acrylic Non 10L Each
600407 Acrylic Non 600ml 20
Accessories
Cartridge Gun
Manual Sausage Gun
Batter Operated Sausage gun
Bulk Loading Gun
Bondfree – Chemical for removing Bondbreaker
Backer Rod
Foam to support the Polyurethane or Acrylic Jointing material in the Panel Joint.Expanda Foam Rod: Medium density, closed cell polyethylene foam backing rod for foaming joint profile and general joint filling, sold per roll, priced per roll. White in colour.Emer-Seal backing Rod: Low density , open cell polyurethane backing rod, sold per roll, priced per roll. Orange in colour.
Polyurethane & AcrylicsFire Rated / Non Fire Rated UV Resistant One Component Joint Sealant. 320gm Cartridge, 600ml Sauage, 10L Pail
Code Description Box Qty
PW-SF600 Powerfoam 750ml Can 1
PW-TF600 Triggerfoam 750ml 1
PW-TFCLEANER Triggerfoam cleaner 500ml 1
PW-SFNOZZLES Powerfoam Nozzles Packs 5
Expanding Foam
Code Description Box Qty
PW-TFTOOL Triggerfoam tool 1
PW-TFTOOLDIS Triggerfoam tool Disposable 1
Triggerfoam Tools for Expanding Foam
TFTOOL TFTOOLDIS
SF600 TF600 TFCLEANER
32
Code Size
561452 4L
561785 15l
Emer-Acrylic SealerWaterbased acrylic copolymer used as a primer/sealer on concrete, brick, titl-up panels etc.
Supercast Hydrofoil SectionsCentre bulb sections are used in expansion, contraction and construction joints. The centre bulb allows for movements in a structure to be accommodated whilst its hexagonal design provides a flat surface. This allows shuttering and joint fillers to fit snugly. Intersections available.
WATERPROOFING
Supercast Rearguard “S”Selection incorporates a flat top centre box which allows movement to be accomodated in expansion joints. The box also provides a seating to support joint fillers. Intersections available.
Supercast Rearguard “R”Plain web sections which are placed externally for use in contraction and costruction joints. They incorporate a central fin to assist setting out shutter location. Intersections available.
Conseal Waterstop Conseal 231 is the perfect product for sealing non-moving joints in pre-cast structures or between in-situ pours and existing concrete applications. It does not depend on moisture activation to work as its mechanical properties depend on the bond to each side of the joint and not the expansion of the product itself. 50mm of cover required.
Superswell Waterstop Superswell 47B is an economical product for sealing less critical In-situ joints that must be water tight. Superswell 47B is recommended for us in non-movement joints eg horizontal constructio joints between floor slabs and cast in situ walls such as lift overrun pit, retaining walls and similar.
Code Description Size
2500240 Conseal 231 19 x 12 x 12mm
2500240 Conseal 231 25 x 25 x 12mm
Code Description Size
2201110 Superswell 47B 25 x 20mm
2500935 Superswell 19 x 12 x 12mm
Hydrotite Waterstop Hydrotite is a hydrophilic waterstop which exhibits excellent durability and water sealing capacity. It expands as it absorbs water and fills up concrete joint gaps confirming to the gap variation, ensuring excellent sealing. Hydrotite is based on tehnology of hydrophilics, a material which expands in a controlled fashion by approximately eight times by volume in presence of moisture to create a pressure seal within the joint.
7mm
25mm
Expansion Delay Coating
Hydrophilic Rubber (Blue)Chloroprene Rubber (Black)
EmerClad Waterproof CoatingOne component waterbased acrylic liquid membrane for waterproofing roofs, facades, balconies and wet areas. 3sqm per litre per coat. 4ltr & 15ltr Matt & Satin. Can be tinted upon request.
33
TOOLS & EQUIPMENT
Pumping PortaPumpFlexshaft Submersible Trash PumpsDrive UnitsClose Coupled Engine Drive PumpsElectric Submersible Pumps 12 VoltElectric Submersible Pumps 240 Volt
Concrete Power Screeding Power ScreedVibratory Double Beam ScreedVibratory Truss Screed
Sawing & Cutting Brick & Masonry SawsFloor & Road SawGreen Concrete SawDemolition SawsDiamond Blades
Power Equipment Air CompressorsGeneratorsPressure WashersCircular SawsDrillsMixersVentilating Fans
Drilling, Breaking, ChisellingBreakersHammer DrillsPoints, ChiselsAccessories
Concrete Hand Finishing Hand ToolsHand ScreedsBull FloatsHardware Tools
Surface Preparation Surface ScarifierSurface Scarifier - Cutter CagesSurface Scarifier - AccessoriesSurface Cutters/Tungsten CutterConcrete Grinder & AccessoriesShot BlastingScarifyingGrindingScraping
Concrete VibratorsPorta Vibe Petrol Concrete VibratorsBackpack VibratorsHeavy Duty Concrete VibratorsHeavy Duty Vibrator AccessoriesElectric Concrete VibratorsPneumatic Concrete VibratorsPneumatic External Vibrators
Compaction Plate Compactors - ForwardPlate Compactors - ReversibleTamping Rammers
Concrete Power FinishingWalk-Behind Power TrowelsRide-On Power TrowelsBump Cutter, Channel Float, Check RodPan Floats, Trowel Blades
34
NOTES
35
NOTES
P R E C A S T C I V I L P R E C A S T T I L T - U P
National Head Office7 Lucca Road,
Wyong, NSW 2259
T: (02) 4350 5000
www.parchem.com.au