conference programme · yayan sunarya, heli siti halimatul munawaroh, iqbal mushapa . 8 | p a g e...
TRANSCRIPT
1 | P a g e
Conference Programme
Day 1 • Monday (15th August 2016)
Time Event Venue
0830-
1030 Opening Ceremony Ballroom 1 & 2
MORNING BREAK
1100-
1300 Keynote Address I & II Conference Hall 2
LUNCH BREAK
1400-
1600
Technical Session Tracks:
D1C1
D1C2
Room: 406
Room: 407
1620-
1830
Plenary Lecture 1:
Dato’ Dr Zainal Abidin Bin Mohd Yusof
Room: 410 Chairman: Assoc Prof Dr Patthi Bin Hussain Co-Chairman: Dr Masdi Bin Muhammad
Plenary Lecture 2:
Ir. Mohammad Fuad Bin Abdullah
EVENING BREAK
End of Day 1
2 | P a g e
Conference Programme
Day 2 • Tuesday (16th August 2016)
Time Event Venue
0830-1040
Technical Session Track: D2A1
Room : 409
MORNING BREAK
1055-1305
Technical Session Tracks: D2B1
Room: 409
LUNCH BREAK
1355-1605
Technical Session Tracks: D2C1 D2C2
Room: 408 Room: 409
EVENING BREAK
1620-1830
Technical Session Tracks: D2D1 D2D2
Room: 408 Room: 409
END OF DAY 2
3 | P a g e
Conference Programme
Day 3 • Wednesday (17th August 2016)
Time Event Venue
0830-
1040
Technical Session Track: D3A1
Room : 410
MORNING BREAK
1055-
1305
Technical Session Tracks: D3B1 D3B2 D3B3 D3B4
Room: 407 Room: 408 Room: 409 Room: 410
LUNCH BREAK
1355-
1605
Technical Session Tracks: D3C1 D3C2 D3C3 D3C4
Room: 407 Room: 408 Room: 409 Room: 410
EVENING BREAK
1615-
1730
Closing Ceremony
END OF CONGRESS
4 | P a g e
Technical Sessions
Day 1 • Monday (15th August 2016)
Venue : 406
Track 1. D1C1 Energy
Time : 14:00 - 16:00
Chair: Assoc Prof Dr Morteza Khalaji Assadi
Co-Chair: Dr Tamiru Lemma
Session Code
Paper ID
Paper Title
Authors
D1C1_E00
Using Microsoft® Excel® to Overcome RAM Software
Limitations
Sureshan a/l Vadivilu
D1C1_E01
A Study on Slug Induced Stresses Using File-Based Coupling
Technique
Abdalellah Mohmmed, Mohammad S. Nasif, Hussain H. Al-
Kayiem
D1C1_E02
Study on the Effect of Inserting Multi-Electrodes in a Material
Exposed to Electromagnetic Wave
Haitham B. Al-Wakeel, Zainal Ambri Abdul Karim
D1C1_E03
Thermodynamic Analysis of Adsorption Cooling Cycle Using
Consolidated Composite Adsorbents-Ethanol Pairs
Animesh Pal
D1C1_E04
Numerical Investigation of Phase Change Materials Thermal
Capacitor for Pipe Flow
Jundika Candra Kurnia
5 | P a g e
D1C1_E05
Validation by PIV of the Numerical Study of Flow in the Two-
Dimensional Turning Diffuser
Normayati Nordin, Zainal Ambri Abdul Karim, Safiah Othman,
Vijay Raj Raghavan, Suzairin Md Seri, Muhammad Farid Shaari,
Sharifah Adzila
D1C1_E06
Modeling and Simulation of Photovoltaic Module with
Enhanced Perturb and Observe MPPT Algorithm Using
Matlab/SIMULINK
Ali Q. Al-Shetwi, Muhamad Zahim Sujod
D1C1_E07
CFD Simulation of Drag Reduction in Pipe Flow by Turbulence
Energy Promoters
Hussain H. Al-Kayiem, Javed Khan
D1C1_E08
Using Fluid Structure Interaction Technique to Investigate the
Effect of Vibration on Bileaflet Mechanical Heart Valve
Deformation
Saleem Kadhim K.
D1C1_E09
Adsorption Cooling System Employing Activated
carbon/HFC410a Adsorption Pair
Ahmed Askalany; Khairul Habib, Morteza Khalaji Assadi
Venue : 407
Track 2. D1C2 Materials
Time : 14:00 - 16:00
Chair: Assoc Prof Dr Ahmad Majdi B Abdul Rani
Co-Chair: Dr Turnad Lenggo Ginta
Session Code
Paper ID
Paper Title
Authors
D1C2_M00 Metal Additive Manufacturing with High Power Multi-lasers
Jeffrey Chew
6 | P a g e
D1C2_M01
Low Pressure Injection Molding of Boron Admixed 316L
Stainless Steel for Engineering Applications
Muhammad Aslam, Faiz Ahmad, Puteri Sri Melor, Khurram
Altaf, Mohd Afian Omar, Muhammad Rafi Raza
D1C2_M02
Role of Pin Profile on Material Flow During Friction Stir
Welding of Nylon-6
Adeel Zafar, Mokhtar Awang, Sajjad Raza Khan, Seyed Sattar
Emamian
D1C2_M03
A Comparative Study of Finite Element Analysis for Friction
Stir Welding Application
Bahman Meyghani, Mokhtar Awang, Seyed Sattar Emamian
D1C2_M04
Synergistic Effects of Zinc Borate and Halloysite Nanotubes
(HNTs) on Char Morphology and Gases Emission of Epoxy
Based Intumescent Fire Retardant Systems
Qandeel Fatima Gillani, Faiz Ahmad, Mohamed Ibrahim Abdul
Mutalib, Puteri Sri Melor, Adiat Ibironke Arogundade
D1C2_M05
Influences of Tool Pin Profile on the Friction Stir Welding of
AA606
Seyed Sattar Emamian, Mokhtar Awang, Patthi Hussain,
Bahman Meyghani, Adeel Zafar
D1C2_M06
Effects of Bauxite Residue Loading on Heat Shielding
Performance of an Ammonium Polyphosphate Based Epoxy
Intumescent Coating System
Adiat Ibironke Arogundade, Puteri Sri Melor, Faiz Ahmad, Aamir
H Bhat, Qandeel Fatima Gillani
D1C2_M07
Graphene Exfoliation and Dispersion in Metal Powder Using
Different Solvents
Zeeshan Baig, Othman Mamat, Mazli Mustapha, Khurram Altaf,
Raphael Joshua
7 | P a g e
D1C2_M08
A Theoretical Investigation into the Performance Of SWCNTs
as an Antireflection Coating Layer For Silicon Solar Cell
Hengameh Hanaei, Morteza Khalaji Assadi, Norani Muti
Mohamed, Robabeh Bashiri
D1C2_M09
Compatibility Study of Thermoplastics Immersed in RON97
Gasoline Blended with Ethanol
Kok Eng Kee, Suhaimi Hassan, Mokhtar Ismail
D1C2_M10
The Mechanism And Efficiency of Inhibition of Galangal
Rhizome (Alpinia Galanga L.) on the Corrosion of Carbon Steel
in an Environment Appropriateness to Conditions of a
Petroleum Well
Yayan Sunarya, Heli Siti Halimatul Munawaroh, Iqbal Mushapa
8 | P a g e
Day 2 • Tuesday (16th August 2016)
Venue : 409
Track 3. D2A1 Energy
Time : 8:30 - 10:40
Chair: Assoc Prof Ir Dr Hj Hamdan B Hj Ya
Co-Chair: Dr M Zulhilmi Paiz Ismadi
Session Code
Paper ID
Paper Title
Authors
D2A1_E09
Phase Change Materials for Energy Conservation in
Sustainable Buildings
El Hadi Bouguerra, Nouredine Retiel
D2A1_E10
The Effect of Wall Temperature to the Combustion of
Diesel/CNG Mixtures
Firmansyah Firmansyah
D2A1_E11
Electrochemical Hydrogen Storage Characteristics of Mg2-
Xcxni 0, 0.1, 0.2, 0.5) Alloys Prepared by Mechanical Alloying
Sajad Haghanifar, Saeid Kakooei, Mokhtar Ismail
D2A1_E12
Empirical Modeling of Hydrate Formation Prediction in
Deepwater Pipelines
Fakhruldin Mohd Hashim, Aijaz Abbasi
D2A1_E13
Development and Validation of a Twin Shaft Industrial Gas
Turbine Performance Model
Aklilu Tesfamichael Baheta, Mojahid Ahmed Shaharin, Anwar
Sulaiman, Syed Muhammad Afdhal Sayed Ahmad Ghazali,
Amare Desalegn Fentaye
D2A1_E14
Effect of Irreversibility on COP of Double Effect Steam
Absorption Chillers
Mohd Amin Abd Majid
9 | P a g e
D2A1_E15
CFD Simulation of Bubbly Diesel-CNG Flow in a Horizantal Pipe
Under the Influence of a Magnetic Field
Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Hussain H. Al-
Kayiem, Mohammad S. Nasif
D2A1_E16
Design and Experimental Investigation of a Slinky Closed Loop
Lake Water Heat Pump System Under the Climate Conditions
of Pakistan
Muhammad Kashif Shahzad, Muzaffar Ali, Tasawar Abbas,
Pervaiz Iqbal, Muhammad Usama Younus
D2A1_E17
Effect of Aeration Coupled with Heating and Demulsifier in a
Demulsification Process of Stubborn Water-in-oil Emulsion
From Slop Oil Tank
Petrus Tri Bhaskoro, Azuraien Japper-Jaafar, Muhammad Arief
Fikry Zainalabidin, Lim Chunhaur
D2A1_E18
Optical Analysis of Various Reflectors Applied in Solar Beam
Down Tower
Ayad Khlief, Syed Ihtsham-ul-Haq Gilani, Hussain H. Al-Kayiem,
Basil Ali
Venue : 409
Track 4. D2B1 Energy
Time : 10:55 - 13:05
Chair: Assoc Prof Ir Dr Mohd Amin B Abd Majid
Co-Chair: Dr Ainul Akmar Bt Mokhtar
Session Code
Paper ID
Paper Title
Authors
D2B1_E16
Experimental Techniques for the Investigation of Water-Diesel
Emulsion Droplets Micro-Explosion
Mhadi Abaker Ismael, Morgan Heikal, A. Rashid A. Aziz, Cyril
Cura
10 | P a g e
D2B1_E17
Effects of Enhancing Cetane Number of Ethanol Fumigation on
Diesel Engine Performance and Emissions
Mohammed Elamen Babiker, A. Rashid A.Aziz, M. R. Heikal,
Suzana Yusup, Abdullah Adam
D2B1_E18
Using Recurrent Data Analysis Instead of Life Data Analysis for
Non-Repairable items inside an existing system
Muhamed Jamil Khan Nurul Amin
D2B1_E19
The Indicators and Criteria of Efficiency, Water Consumption
and Emission of Thermal Power Plants
Seyed Reza Shamshirgaran, Morteza Khalaji Assadi
D2B1_E20
Exergoeconomic Power Cost Rates Model for Onshore and
Offshore Gas Turbines
Mohd Amin Abd Majid, Adzuieen Nordin, Ainul Akmar Mokhtar
D2B1_E21
Performance of Dual Fuel Combustion in a CI Engine Powered
by Blended Diesel-Biodiesel and Syngas
Bahaaddein Kamal Mohamed Mahgoub, Suhaimi Hassan,
Shaharin Anwar Sulaiman, Rizalman Mamat, Abdul Adam
Abdulah
D2B1_E22
A Review of Optical Flow Models Applied for Fluid Motion
Estimation
Osman Abu Bakr Mohmmed Ahmed, Mark Ovinis, Harrison
Osei, Fakhruldin Mohd Hashim
D2B1_E24
Thermodynamic Analysis of a Single Cylinder Crank-Rocker
Engine
Salah Eldin Mohammed
D2B1_E26
Response Surface Methodology Optimization of Palm -Rubber
Seed Combined Oil Based Biodiesel and IDI Diesel Engine
Performance and Emission
Ibrahim Adam, A. Rashid A. Aziz, Suzana Yusup
11 | P a g e
D2B1_E27
Towards Mitigating Engine-out Emissions: A Migration to Fuel
Based and Combustion Based Solutions
Rasheed Opatola
Venue : 408
Track 5. D2C1 Production
Time : 13:55 - 16:05
Chair: Dr Dereje Engida Woldemichael
Co-Chair: Mr Mohd Faizairi Mohd Nor
Session Code
Paper ID
Paper Title
Authors
D2C1_P00
Process Optimization in the Dyeing of Polyester Fibers through
the Control Variables Temperature Gradient
Hugo G. Jimenez Pacheco, Daniela Delgado
D2C1_P01
Micro-milling of Thin Mould for Continuous Productions of
Polymer Microfluidic Devices
Kushendarsyah Saptaji
D2C1_P02
Evaluation of Chips Formation of AISI 316L SS Using Precision
End- Milling
Muhammad Yasir, Turnad Lenggo Ginta, Bambang Ariwahjoedi,
Mohd Danish, Adamu Alkali
D2C1_P03
Cylindrical Axis Detection and Part Model Orientation for
Generating Sub Delta Volume Using Feature Based Method
Ahmad Faiz Zubair, Mohd Salman Abu Mansor
D2C1_P04
Investigations Into the Effects of Maximum Deflection in Low
Stiffness Resilient Shaft of Semi Active Steering Systems
Joga D Setiawan, Roslina Rashid, Masri Baharom, Muinuddin
Maharun
12 | P a g e
D2C1_P05
An Analytical Approach to Investigate the Effect of Grooved
Surface on Short Journal Bearing's Performance
Shahab Hamdavi, Hamdan Ya, T V V L N Rao, Ku Muhammad
Faez
D2C1_P06
An Analytical Investigation of the Grooved Journal Bearing's
Performance with Slip/No-Slip Texture Bearing
Ku Muhammad Faez, Shahab Hamdavi, Hamdan Ya, T V V L N
Rao
D2C1_P07
Study Of Tool Life of Uncoated Wc-Co Insert during Flame
Assisted Machining of 316l Stainless Steel
Adamu Alkali, Turnad Lenggo Ginta, Ahmad Majdi Abdul-Rani,
Hasan Fawad, Muhammad Yasir, Mohd Danish
D2C1_P08
Investigation of the Temperature Distribution on the Tool and
Workpiece During Cryogenic Machining of Mg Alloy by Finite
Element Analysis
Mohd Danish, Turnad Lenggo Ginta,Bambang Ariwahjoedi,
Muhammad Yasir, Adamu Alkali
D2C1_P09 Study on Robots Failures in Automotive Painting Line
Mohd Amin Abd Majid, Ahmad Fauzi Fudzin
Venue : 409
Track 6. D2C2 Reliability
Time : 13:55 - 16:05
Chair: Dr Masdi B Muhammad
Co-Chair: Dr Hilmi B Hussin
Session Code
Paper ID
Paper Title
Authors
D2C2_R00 Use of flowchart in identification of Root Causes
Muhamed Jamil Khan Nurul Amin
13 | P a g e
D2C2_R01
Comprehensive Data Collection for Root Cause Failure Analysis
in Oil and Gas Industries
Umair Ahmed, Hilmi Hussin, Masdi Muhammad
D2C2_R02
A Fuzzy Logic Model to Determine CUI Corrosion Rate for
Carbon Steel Piping Systems
Muhammad Mohsin Khan, Ainul Akmar Mokhtar, Hilmi Hussin
D2C2_R03
A Review of T-Junction Geometrical Effect on Two-Phase
Separation
Ahmed Saieed, Ban Sam, William Pao, Fakhruldin Mohd Hashim,
Rohaizad Mohd Norpiad
D2C2_R04 Replacement Analysis Using Probabilistic Life Cycle Costing
Freselam Mulubrhan
D2C2_R05 Simulation of Two Phase Oil-Gas Flow in T-junction
Ban Sam, William Pao, Mohammad Nasif
D2C2_R06
Sensitivity Analysis of Concave Capacitance Sensors for Holdup
Measurement in Two-Phase Flow
Peter Beh, Lam Ghai Lim, William Pao, Tong Boon Tang
D2C2_R07
Modeling and Sensitivity Analysis of a Multi-Nets ANNs Model
for Real-Time Performance-Based Condition Monitoring of an
Industrial Gas Turbine Engine
Mohammadreza Tahan, Umair Sarwar, Masdi Muhammad,
Zainal Ambri Abdul Karim
D2C2_R08
An Investigation Into Root Cause Failure Analysis (RCFA)
Practices in Oil and Gas Industry
Hilmi Hussin, Zulkipli Ghazali, Nor Azizy Suratanin, Masdi
Muhammad, Ainul Akmar Mokhtar
D2C2_R09 Fault Diagnosis Model for Rotating Machinery Based on
Principal Component Analysis and Neural Network
14 | P a g e
Masdi Muhammad, Umair Sarwar, Mohammadreza Tahan,
Zainal Ambri Abdul Karim
D2C2_R10
An Experimental Analysis Using Taguchi Method in Resolving
the Significant Factors Subject to Corrosion Under Insulation
Nurul Rawaida Ain Burhani, Masdi Muhammad, Mokhtar Che
Ismail, Masri Asmi Mahed
Venue : 408
Track 7. D2D1 Energy
Time : 16:20 - 18:30
Chair: Assoc Prof Dr Zainal Ambri B Abdul Karim
Co-Chair: Dr Khairul Habib
Session Code
Paper ID
Paper Title
Authors
D2D1_E27
Application of Modularity in a Piston Pump Assembly Line of a
Hydraulic System
Abdul Munaf Shaik, Kesava Rao, Srinivasa Rao, Mallik Mantrala
D2D1_E28
Development and Implementation of Intelligent Condition
Monitoring System for Steam Turbine Trips
Firas B. Ismail Al-Naimi, Rahmat Izaizi B. Ismail, Pin Jern Ker
D2D1_E29
Moisture Content of the Sewage Sludge Dried Using Thermal
Dryer
Safuan Zakaria, Suhaimi Hassan
D2D1_E30
Energy Absorption Capability of Aluminium Tube Partially
Wrapped with Glass/Epoxy Subjected to Quasi-Static Loading
Tahir Abbas, Hamdan Ya, Mohamad Abdullah
D2D1_E31 Determination of Optimal PDC Cutters Geometry for Multi-
Response Optimization Using the Taguchi Method
15 | P a g e
Amirul Jamaludin, Shahrul Kamaruddin, Abdul Othman, Mohd
Zulhilmi Paiz Ismadi
D2D1_E32 Validation of Simulation Procedure for Vertical Oil/Water Flow
Iylia Abdul Jamil
D2D1_E33
False Trip Root Cause Analysis and Mitigation in Electrical
Power System Protection
Abdelkader Zitouni, Mahfoud Chafai, Hamid Bentarzi ,
Abderrahmane Ouadi
D2D1_E34
Dependability and Security Enhancement of Distance Relay in
Power System
Hamid Bentarzi, Abdelkader Zitouni, Ayache Mati,
Abderrahmane Ouadi
D2D1_E35
A Study of Vortex Flow At the Bottom of a Double Concentric
Cylinder
Mohd Fakrul Radzi Mohd Mawardzi
D2D1_E36
Setting Up a Remote Accessing of a PV Plant and Its Analysis
Hoong Wei Wong, Syed Ihtsham-ul-Haq Gilani, Hussain H. Al-
Kayiem
Venue : 409
Track 8. D2D2 Materials
Time : 16:20 - 18:30
Chair: Assoc Prof Dr Othman B Mamat
Co-Chair: Mark Ovinis
Session Code
Paper ID
Paper Title
Authors
D2D2_M11
The Microstructure, Physical and Mechanical Properties of
Silicon Carbide with Sintering Additives: An Experimental
Observation
16 | P a g e
Muhammad Ismeth Amir Johari, Mazli Mustapha, Othman
Mamat, Saeid Kakooei, Turnad Lenggo Ginta, Mohd Zulhilmi
Paiz Ismadi
D2D2_M12
Physical, Thermal, and Dielectric Properties Enhancement in
Graphene/Poly (Vinyl Alcohol) Nanocomposite as Novel
Multifunctional Materials
Mohd Firdaus Abdrahman, Suraya Abdul Rashid, Norizah Abdul
Rahman
D2D2_M13
Finite Element Analysis of Stress Variation Along the Depth of
Gear Tooth
Saravanan Karuppanan, Santosh S Patil
D2D2_M14
Acid Leaching as Efficient Chemical Treatment for Rice Husk in
Production of Silica Nanoparticles
Abdullahi Mahmud, Puteri Sri Melor, Faiz Ahmad, Abg Aidel
Farrezzuan
D2D2_M15
Influencing Factors in Cathodic Disbondment of Polyaniline in
the Epoxy Coatings
Noor A’in A. Rahman, Mokhtar Ismail, Zakaria Man
D2D2_M16
Characterization and Study of Char Performance of Glass Wool
and Rockwool Hybrid Fibre Reinforced Intumescent Coatings
Norlaili Binti Amir, Ariff Nadzmi Abdul Jalil, Faiz Ahmad
D2D2_M17
Compressive Behaviour OF Basalt FRP and Basalt-Carbon
Hybrid FRP Laminates
Ali Nawaz, Saravanan Karuppanan, Naseer Hamed
D2D2_M18
Investigation on Thermocompression Bonding Using Lead Free
Sinterable Paste and High Lead Solder Paste for High Power
Led Packaging
Gunaseelan Chandrakasan, Mark Ovinis, Saravanan Karuppanan
17 | P a g e
D2D2_M19
Design and Implementation of Scanning ElectroChemical
Microscopy (SECM) for Scanning Open Circuit Potential System
on Damaged Coated Surfaces
Mohammadali Beheshti, Saeid Kakooei, Mokhtar Ismail,
Shohreh Shahrestani
D2D2_M20
Effect of Heat Treatment on Corrosion Behavior of Weld
Deposited Co-Cr-Mo Alloy
Mantrala Kedar Mallik, Ch. Srinivasa Rao, V. V. S. Kesava Rao,
Abdul Munaf Sk
18 | P a g e
Day 3 • Wednesday (17th August 2016)
Venue : 410
Track 9. D3A1 Reliability
Time : 8:30 - 10:40
Chair: Assoc Prof Dr Masri B Baharom
Co-Chair: Dr Setyamartana Parman
Session Code
Paper ID
Paper Title
Authors
D3A1_R11
Design and Implementation of Cooking Oil and Water
Filtration System for Domestic Application
Firas B. Ismail Al-Naimi, Dhanakkumar Sudiskumar, Mohammad
Nasif
D3A1_R12
Various Mathematical Model of Torsional Vibration in Oilwell
Drillstring and Their Validation Techniques
Hafiz Iman, William Pao
D3A1_R13
RAM Analysis of Crude Oil Transfer Pumps Using Dominant
Failure Mode
Ainul Akmar Mokhtar
D3A1_R14
Gas Turbines Health Prognostics: A Short Review
Tamiru Alemu, Fakhruldin Mohd Hashim, Mohd Amin Abd
Majid, Ainul Akmar Mokhtar
D3A1_R15
Orthonormal Basis Filters for Gas Turbine Fault Diagnostics
System Design: A Review
Tamiru Alemu, Fakhruldin Mohd Hashim, Mohd Amin Abd
Majid, Ainul Akmar Mokhtar
D3A1_R16 Cuckoo Search and Radial Basis Function Network for
Modeling Industrial Gas Turbines
19 | P a g e
Tamiru Alemu, Fakhruldin Mohd Hashim, Mohd Amin Abd
Majid, Ainul Akmar Mokhtar
D3A1_R17
A Comprehensive Framework and Key Performance Indicators
for Maintenance Performance Measurement
Tahir Raza Memon, Masdi Muhammad, Mohd Amin Abd Majid
D3A1_R18
Inhibition Effect of Enhanced Oil Recovery (EOR) Surfactant on
Carbon Steel Corrosion
Mokhtar Ismail, Mohd Fauzi Abd Karim
D3A1_R19
Performance of Corrosion Inhibitor with Sand Deposit in CO2
Environment
Mokhtar Ismail, Mohd Fauzi Abd Karim
Venue : 407
Track 10. D3B1 Energy
Time : 10:55 - 13:05
Chair: Assoc Prof Dr Syed Ihtsham Ul-Haq Gilani
Co-Chair: Ir Dr Hj Suhaimi B Hassan
Session Code
Paper ID
Paper Title
Authors
D3B1_E37
A Simplified Design Procedure of a Parabolic Trough Solar
Field for Industrial Heating Applications
Rizwan Masood, Syed Ihtsham-ul-Haq Gilani, Hussain H. Al-
Kayiem
D3B1_E38
Developed Mathematical Model of Solar Thermal Parabolic
Trough Power Plant At Universiti Teknologi PETRONAS
Sanan Mohammad, Hussain H. Al-Kayiem, Morteza Assadi
D3B1_E39 Comparative Critique on the Performance Evaluation of A
Solar - Air Heater for Natural Updraft Solar System
20 | P a g e
Ali Ismaeel, Hussain H. Al-Kayiem, Aklilu Tesfamichael Baheta,
Mohammed A. Aurybi
D3B1_E40
Experimental Investigation on the Vibration Induced by Slug
Flow in Horizontal Pipe
Zahid I. Al-Hashimy, Hussain H. Al-Kayiem
D3B1_E41
Flow Dynamics Behaviour of a Novel Liquid-liquid
Hydrocyclone with Varying Upper Cylindrical Lengths and
Number of Inlets
Harrison Osei, Hussain H. Al-Kayiem, Osman Abu Bakr
Mohmmed Ahmed
D3B1_E42
Numerical Investigation on the Effect of the Inlets on the
Performance of Oil/Water Separation in Hydrocyclone
Yin Yin Khor, Hussain H. Al-Kayiem, William Pao
D3B1_E43
Effect of ASP Flooding on Oil-Water Stabilization and
Separation
Javed Khan, Hussain H. Al-Kayiem
D3B1_E44
Motion Control Strategy of an Underwater Glider in the
Presence of External Disturbances
Barkat Ullah, Mark Ovinis, Joga D Setiawan, Syed Saad Azhar Ali
D3B1_E45
Effects of Performance Deterioration on Gas Path
Measurements in an Industrial Gas Turbine
Amare Desalegn Fentaye, Aklilu Tesfamichael Baheta, Syed
Ihtsham-ul-Haq Gilani
Venue : 408
Track 11. D3B2 Materials
Time : 10:55 - 13:05
Chair: Dr William Pao
Co-Chair: Dr Tuan Mohammad Yusof Shah Tuan Ya
21 | P a g e
Session Code
Paper ID
Paper Title
Authors
D3B2_M21
Chloride Stress Corrosion Cracking (CSCC) of Austenitic
Stainless Steel Under Thermal Insulation
Prema Sivanathan, Mokhtar Ismail, Kok Eng Kee
D3B2_M22
Effect of Low Velocity Impact on Deformation Behaviour of
Metallic Vessel
Naseer Farhood, Saravanan Karuppanan, Hamdan Ya, Ali Nawaz
D3B2_M23
Feasible Joining on the Reaction Layer of Diffusion Bonded
Sialon and Duplex Stainless Steel
Farhana Haris
D3B2_M24
Surface Properties of Nitrided Layer on AISI 316L Austenitic
Stainless Steel Produced by Varied Time Low-Temperature
Thermochemical Treatments
Hassan Mahmoud
D3B2_M25
Rehabilitation for Foot/Ankle - Continuous Passive Motion
(CPM) Using Shape Memory Alloy (SMA) Actuated Stewart
Platform
S Krishnan, Ahmad Majdi Abdul-Rani, Nagarajan T, Ramanathan
Ramiah, Winson Ambaraj
D3B2_M26
Quenching and Heat Treatment of Welded Duplex Stainless
Steel to Avoid Intergranular Corrosion
Nsikan Dan
D3B2_M27
Microstructure Based Finite Element Analysis for Deformation
Behaviour of Magnesium Based Composites
Prasanth Kumar, T V V L N Rao, Masri Baharom
D3B2_M28 Overview of Underwater Friction Stir Welding
Nor Fakhrul Mohd Noor, Mokhtar Awang
22 | P a g e
D3B2_M29
Temperature Profile and Fracture Location of Friction Stir
Welded AA6063-T6 Pipe Butt Joint
Azman Ismail, Mokhtar Awang, Darulihsan Abdul Hamid,
Fauziah Ab Rahman, Megat Khalid Puteri Zarina
Venue : 409
Track 12. D3B3 Energy
Time : 10:55 - 13:05
Chair: Assoc Prof Dr Hussain H Al - Kayiem
Co-Chair: Dr Mohammad S Nasif
Session Code
Paper ID
Paper Title
Authors
D3B3_E46
Efficacy of Water-in-Diesel Emulsion to Reduce Exhaust Gas
Pollutants of Diesel Engine
Zainal Ambri Abdul Karim, Mohammed Yahaya Khan,
Muhammad Hafiz Aiman Zulfikri Halim
D3B3_E47
Enhancement of the Heat Transfer Rate in Free Convection
Solar Air Heater Using Pin Shaped Artificial Roughness on
Absorber Plate
Syed Gilani, Hussain H. Al-Kayiem, Buschmann Matthias, Dereje
Engida Woldemichael
D3B3_E48
Investigation on the Influence of Collector Height on the
Performance of Solar Chimney Power Plant
Sundus S. Al-Azawiey, Hussain H. Al-Kayiem, S. Hassan
D3B3_E49
Mathematical Modeling to Evaluate the Performance
Enhancement of Solar Updraft Power Plant by External Heat
Source
Mohammed A. Aurybi, Hussain H. Al-Kayiem, Syed Ihtsham-ul-
Haq Gilani, Ali Ismaeel
23 | P a g e
D3B3_E50
Effect of Air Gap on Performance Enhancement of Building
Assisted with Photo Voltaic Systems
Kashif Irshad, Khairul Habib, Morakinyo Kareem
D3B3_E51
Heat Transfer Enhancement Under Turbulent Flow for EG-
Water Mixture of 40:60 Ratio
Seshu Vandrang, Korada Viswanatha Sharma, Subhash Kamal,
Suleiman Akilu
D3B3_E52
Properties of Silica Nanofluid in Glycerol-Ethylene Glycol
Mixture as Base Liquid
Suleiman Akilu, Korada Viswanatha Sharma, Aklilu Tesfamichael
Baheta, Seshu Vandrangi
D3B3_E53
Thermodynamic Analysis on Oil Palm Biomass Cogeneration
Plant
Nazri Talib, Mohd Amin Abd Majid
D3B3_E54
Simplified Modelling Method to Predict Output Speed of an
Overrunning Clutch Using ADAMS/Solver Subroutine
Mohamad Nabil Imran Bin Abdul Rahman, Masri Baharom
Venue : 410
Track 13. D3B4 Materials
Time : 10:55 - 13:05
Chair: Assoc Prof Dr Faiz Ahmad
Co-Chair: Dr Thar M Badri Albarody
Session Code
Paper ID
Paper Title
Authors
D3B4_M30
Dispersion of Carbon Black in Epoxy Resin and the Electrical
Property of the Nanocomposite
Raphael Joshua, Zeeshan Baig, Othman Mamat
24 | P a g e
D3B4_M32
A Modeling Study by Artificial Neural Network on Process
Perimeter Optimization for Silver Nanoparticles Production
Silvia Chowdhury, Faridah Yusof, Nadzril Sulaiman, Shahrul
Naim Sidek, Mohammad Omer Faruck
D3B4_M33
Effects of Sintering Parameters on the Microstructural
Characteristics of Cu/CNTs Nanocomposites
Ali Samer Muhsan, Norani Muti Mohamed, Faiz Ahmad, Thar M.
Badri Albarody, Muhammad Umair Shahid
D3B4_M34
Electrodeposition of Nickel-Cobalt / Alumina (Ni-Co/Al2O3)
Composite Coatings: A Current Approach
Nik Hassanuddin Nik Yusoff, Othman Mamat
D3B4_M35
The Mechanism and Microstructure of Silicanizing Process on
Mild Steel Substrate in the Medium of Silica Sand
Yusnenti Faziran Mohd Yunos, Othman Mamat
D3B4_M36
Application of Taguchi's Method on Purifying Process of
Tronoh Silica Sand Via Mechanical Milling and Ultrasonic Bath
Nazratulhuda Awang, Othman Mamat, Zeeshan Baig
D3B4_M37
Specific Bearing Strength of Bolted Composite Joint with
Different Glass Fiber Reinforcement
Abdul Othman, Shahrul Kamaruddin
D3B4_M38
The Effect Of Repeated Welding Cycles on the Microstructure
and Ferrite Content of 25Cr Super Duplex Stainless Steel Weld
Metal by Automatic Orbital TiG Welding
Danny Satya Mauliddin, Turnad Lenggo Ginta
Venue : 407
Track 14. D3C1 Energy
Time : 13:55 - 16:05
Chair: Dr Aklilu Tesfamichael Baheta
Co-Chair: Dr Kee Kok Eng
25 | P a g e
Session Code
Paper ID
Paper Title
Authors
D3C1_E55
Dual AxisTracking Model for a Heliostat Field Solar Tower Heat
Flux Investigation
Basil Ali, Syed Ihtsham-ul-Haq Gilani, Hussain H. Al-Kayiem,
Ayad Khlief
D3C1_E56
Flow Control in S-Shaped Aggressive Diffuser using Grooves on
the Inner and Outer Surfaces
Raed Jessam, Hussain H. Al-Kayiem, Mohammad Nasif
D3C1_E57
An Experimental Investigation of Microexplosion in Bio Fuel
Emulsion
Mohammed Yahaya Khan, Zainal Ambri Abdul Karim, A. Rashid
A. Aziz
D3C1_E59
Preliminary Study of Renewable Pico-Mini Hydro
Electrification in Royal Belum, Perak
Mohd Faizairi Mohd Nor, Suhaimi Hassan, M Azman Zakariya,
Ahmad Fadzil Faizal
D3C1_E60
Effect of Mixture Ratio of Cow Faeces with Water on Biogas
Production
Chalilullah Rangkuti, Rosyida Permatasari
D3C1_E61
Evaluating Different Scenarios for Optimizing Energy
Consumption to Achieve Sustainable Green Building in
Malaysia
Morteza Khalaji Assadi, Seyed Mojib Zahraee, Mohammad
Hossein Zaeimbashi Isaabadi, Khairul Habib
D3C1_E62
CFD Simulation of Bubbling Fluidized Bed: Effect of Distributor
Plate Orifice Pattern Configuration On Hydrodynamics of Gas-
Solid Mixing
26 | P a g e
Iman E. Afrooz, Chandra Mohan Sinnathambi, Saravanan
Karuppanan, Dennis Ling Chuan Ching
D3C1_E63
Effect of Varying Roof Run-Off Coefficient Values and Tank
Size on Rainwater Harvesting System's Water Savings in
Malaysia
Mohammad Nasif, Rozanna Roslan
Venue : 408
Track 15. D3C2 Materials
Time : 13:55 - 16:05
Chair: Assoc Prof Dr Patthi B Hussain
Co-Chair: Dr Norlaili Bt Amir
Session Code
Paper ID
Paper Title
Authors
D3C2_M40 Technical Acceptance Assurance Limit of IFL™ Pipelines
Thar M. Badri Albarody
D3C2_M41
Statistical Analysis of Effective Variable Parameters on
Corrosion Rate of X52 Carbon Steel
Khairina Azmi Zahidah, Saeid Kakooei, Mohd Afiq Sidqi B
Muhammad Ridhwan Pang, Mokhtar Ismail, Kok Eng Kee, Bothi
Raja Pandian
D3C2_M42
Condensation Rate Effect on Top of Line Corrosion in CO2
Environment
Syuhaidah Saufi Anuar, Mokhtar Ismail, Bothi Raja Pandian,
Noor A’in A. Rahman
D3C2_M43
Determination of Critical Micelle Concentration (CMC) of
Corrosion Inhibitor Via Electrochemical Measurement
Rafida Ahmad Jaal, Mokhtar Ismail, Bambang Ariwahjoedi
27 | P a g e
D3C2_M44
The Effect of Total Length of Wire Ropes on the Torsional
Properties of Low-Stiffness-Resilient-Shaft
Najaf Hussain, Masri Baharom, Muinuddin Maharun
D3C2_M45
A Literature Survey on Challenges in Stress Based Topology
Optimization
Hailu Shimels Gebremedhen, Dereje Engida Woldemichael,
Fakhruldin Mohd Hashim
D3C2_M46
Prototype Development of Thermoelectric Generator System
for Exhaust Heat Recovery of an Automobile
Mior A. Said, D Bong, M.S. Mohd, S.S. Dol
Venue : 409
Track 16. D3C3 Production
Time : 13:55 - 16:05
Chair: Assoc Prof Dr A Rahim Othman
Co-Chair: Assoc Prof Dr Shahrul Kamaruddin
Session Code
Paper ID
Paper Title
Authors
D3C3_P10
CFD Analysis of Swirly Flow Field in Conical and Cylindrical
Cyclones for Deoiling Applications
Mohd Azri Mohd Nor, Hussain H. Al-Kayiem, Tamiru Alemu
D3C3_P11
Effect of Tool Parameters on Friction Stir Welding Joint
Properties of Aluminum Alloy AA6061
Srinivasa Rao Pedapati, Abdullah Faozi Omar Bawazir, Mokhtar
Awang, Ahmad Majdi Abdul-Rani, Jebaraj S
D3C3_P12
Grain Refinement of LM25 Aluminum Alloy Casting Using
Sloping Plate Process
Junaid Qayyum, Khurram Altaf, Adnan Lossar, Masoodur Shah,
Ahmad Majdi Abdul-Rani
28 | P a g e
D3C3_P13
Application of Nano Aluminum in Modified EDM: PMEDM
Ahmad Majdi Abdul-Rani, Alexis Mouangue Nanimina, Turnad
Lenggo Ginta, T V V L N Rao, Srinivasa Rao Pedapati
D3C3_P14
Optimally Tuned Active Damped Dynamic Vibration Absorber
T V V L N Rao, Ainul Akmar Mokhtar, Masdi Muhammad, Patthi
Hussain
D3C3_P15
The Influence of Plastic Extrusion Blow Molding Parameters on
Waste Reduction
Shahrul Kamaruddin
D3C3_P16
Spiraling Motion of an Underwater Glider: Dynamic Modeling
Muhammad Yasar Javaid, Mark Ovinis, Fakhruldin Mohd
Hashim, Adi Maimun, Yasser Mohamed Abdel Razak, Barkat
Ullah
D3C3_P17
Modelling of Pool Fire and Injury Prediction Considering
Different Wind Speeds and Directions in Offshore Platform
Usama Niazi, Mohammad Nasif, Masdi Muhammad,
Muhammad Imran
D3C3_P18
Decomposed Dicom Video Into Frames Using MATLAB
Syazatul Aniza Arshad, Tuan Mohammad Yusof Shah Tuan Ya,
Osama Sabir, Lila Iznita Izhar
D3C3_P19 Optimization of Pressure Vessel Design Using pyOpt
Dereje Engida Woldemichael, Abraham D Woldeyohannes
Venue : 410
Track 17. D3C4 Reliability
Time : 13:55 - 16:05
Chair: Assoc Prof Dr Srinivasa Rao Pedapati
Co-Chair: Assoc Prof Dr Mokhtar Che Ismail
29 | P a g e
Session Code
Paper ID
Paper Title
Authors
D3C4_R20
Firefly Algorithm and WNN for Fault Detection in Stationary
Gas Turbines
Tamiru Alemu, Fakhruldin Mohd Hashim, Mohd Amin Abd
Majid, Ainul Akmar Mokhtar
D3C4_R21 Transportation Programming Model for Gas Network
Amin Yahyazadeh, Mohd Amin Abd Majid
D3C4_R22
Fuzzy Multi-criteria Decision Making Model for Risk
Assessment
Shuaib Kaka, Hilmi Hussin, Mohd Amin Abd Majid
D3C4_R23
Cell-By-Cell Artificial Neural Networks Model for Predicting
Laminar, Incompressible, Viscous Flow
Tuan Mohammad Yusof Shah Tuan Ya, Osama Sabir
D3C4_R24
Ontology Based Decision Support Knowledge Acquisition
Module
Kafayat Shobowale, Fakhruldin Hashim, Hilmi Hussin
D3C4_R25
CFD Investigation on the Effect of Varying Fire Sprinkler
Orientation on Sprinkler Activation Time
Mohammad Nasif, Mohamed Fekry, Firas B. Ismail Al-Naimi
D3C4_R26
Using One Way Fluid Structure Interaction Coupling to
Investigate the Effect of Blood Flow on the Bileaflet
Mechanical Heart Valve Structure
Mohammad Nasif, Saleem Kadhim, K., Hussain H. Al-Kayiem,
Rafat Al Waked
D3C4_R27
Design and Analysis of Hydraulic in Heavy Commercial Vehicle
by Recovering Energy During Braking
Setyamartana Parman
30 | P a g e
D3C4_R28
Waveform Based Inverse Kinematics Algorithm of
Kinematically Redundant Manipulator
Affiani Machmudah, Setyamartana Parman, Masri Baharom