1

5th

International Conference on Advance Design

and Manufacture 25th to 28th September 2013,

Valencia, Spain

Conference Information

2

Table of Content

1. Conference Organisation .............................................................................................................. 3

2. Conference Venue ........................................................................................................................ 5

3. Conference Programme outline .................................................................................................... 5

4. Outline of Conference Sessions .................................................................................................... 6

5. Conference Programme ................................................................................................................ 7

6. Other Information ....................................................................................................................... 16

7. Maps of the conference venue .................................................................................................... 19

3

1. Conference Organisation

Conference Chairman

Professor Daizhong Su (UK)

Steering Committee Professor Ann Priest (UK), Professor Changhua Qiu (China), Professor Zongquan Deng (China)

Programme Committee (listed in an alphabetic order): Chairmen Peter Westland (UK), Professor Majan Sarshar and Professor Shifan Zhu (China)

Members

Dr. Amin Al-Habaibeh (UK)

Dr. Anton Ianakiev (UK)

Professor Bing Li (China)

Dr Boussad Abbes (France)

Dr Chang J. Wang (UK)

Professor Craig Chapman (UK)

Professor Dein Shaw (Taiwan)

Professor Dominique Millet (France)

Professor Dongyan Shi (China)

Professor Doru Talaba (Romania)

Dr. Erhan ilhan Konukseven (Turkey)

Professor Fangyi Li (China)

Professor Frank Schäfer (Germany)

Dr Giuseppe Salvia (UK)

Professor Han van Loon (Switzerland)

Dr. Hans-Ulrich Heidbrink (Germany)

Dr. Harri Eskelinen (Finland)

Dr. Hongbing Fang (USA)

Professor Hong Hocheng (Taiwan)

Professor James Chen (Taiwan)

Dr Jihui Yin (China)

Dr. Ian Solomonides (Australia)

Dr. Jiachen Hou (UK)

Dr. John Redgate (UK)

Professor Jun Wang (China)

Dr. Kuan Yew Wong (Malaysia)

Professor Kurt Marti (Germany)

Professor Liliana Soares (Portugal)

Professor Leslie Henshall (UK)

Professor Marc Zolghadri (France)

Professor Masoud Rais-Rohani (USA)

Professor Matthias L. Hemmje (Germany)

Martin Higginson (UK)

Professor Ming-xi Tang (Hong Kong);

Professor Nickolas S. Sapidis (Greece)

Professor Ravipudi Venkata Rao (India)

Professor Shouqian Sun (China)

Dr. Steve Plummer (UK)

Dr. Wenjie Peng (UK)

Professor Yimin Shao (China)

Professor Ying Qiao Guo (France)

Dr. Yu Xiong (UK)

Dr Zhen Shang (China)

4

Organising Committee

Chairmen: Juan Costa (Spain), Paul Johnson (UK), Professor Zhiqiang Liu (China), Professor Yijun Ren

(China), and Professor Baoyu Song (China)

Members

Ammar Irhoma (UK)

George Agyekum-Mensah (UK)

Dr Jihui Yin (China)

Jose Casamayor (UK)

Dr Lilia Fernández Aquino (Spain)

Dr Zhen Shang (China)

Zhongming Ren (UK)

5

2. Conference Venue

The conference will take place at 'ADEIT- Fundación Universidad-Empresa de València'

http://www.adeituv.es/en/quienes-somos

Address: ADEIT- Fundación Universidad-Empresa de Valencia - Principal

Plaza Virgen de la Paz , 3

46001 – Valencia

Location: Please look at the following Web link for location (see other information for details)

https://maps.google.co.uk/maps?ie=UTF8&q=ADEIT+-+Fundaci%C3%B3n+Universidad+-

+Empresa+de+la+Universitat+de+Val%C3%A8ncia&iwloc=A&gl=GB&hl=en

3. Conference Programme outline

25th

September Registration: 15:00-19:00 at the conference venue shown above and other information below

26th

September Registration: 8:20 – 9:00

Opening, 9:00-9:10, Lecture Theatre

Keynotes and conference sessions: 9:10 – 18:20

Conference dinner: 18:30 – 20:30

27th September Conference sessions: 9:00 – 16:00

Banquet: 18:30-21:00

28th September: City tour

6

4. Outline of Conference Sessions

26 Sept. Lecture Theatre Room B Room C

9:00-9:10 Opening session

9:10-10:20 Keynotes 1 and 2

10:20-10:35 Tea/coffee break

10:35-12:40 Session A1:

Special session ‘Environmental accounting’ (1)

Session B1:

Special session ‘Gearing and transmissions’ (1)

Session C1:

Special session ‘Sustainable lighting’

12:40-13:30 Lunch

Room A Room B Room C

13:30-15:35 Session A2:

Special session ‘Environmental accounting’ (2)

Session B2:

Special session ‘Gearing and transmissions’ (2)

Session C2: Finite/boundary element

methods

15:35-15:50 Tea/coffee break

15:50-18:20 Session A3:

Eco-design and sustainable technology

Session B3:

Engineering Design

Session C3:

Production engineering

18:30-20:00 Conference dinner

27 Sept. Room A Room B Room C

9:00-10:50 Session A4:

Robots and engineering management

Session B4: Product/Industrial design

and design methodologies (1)

Session C4:

Optimisation, simulation and computing technologies

10:50-11:00 Tea/coffee break

11:00-13:10 Session A5:

Special session ‘Machine condition monitoring’ (1)

Session B5:

Product/industrial design and design methodologies

Session C5:

Special session ‘Manufacturing informatics’

13:10-14:00 Lunch

14:00-15:00 Session A6: Special session ‘Machine condition monitoring’ (2)

Session B6:

CAD/CAM/CAE

Session C6:

Manufacture and materials

15:00-16:00 IFToMM Gearing & transmissions technical

committee meeting

18:30-21:00 Banquet

28 Sept. City tour

7

5. Conference Programme Registration: 8:20 – 9:00

Opening, 9:00-9:10, Lecture Theatre

Keynote 1, 9:10-9:45, Lecture Theatre

Promoting advanced manufacturing technologies in the EU

Christine van Wunnik, Project Officer, Executive Agency for Competitiveness and Innovation,

European Commission

Keynote 2, 9:45-10:20, Lecture Theatre

A Driving Force in Sustainable Lighting: Enabling Material

Dr. Ding Jin, Program Manager Innovation, BG Lighting Source and Electronics, Philips

Lighting, The Netherlands.

Session A1: Special Session ‘Environmental Accounting (1)

10:35-12:40, 26th

September. Lecture Theatre.

Session Organizer: EU FP7 myEcoCost project consortium

Chair: Dr. Markus Werner, myEcoCost project coordinator; TriaGnoSys, Germany

Forming the Nucleus of a Novel Ecological Accounting System: The myEcoCost Approach

(KEM, pages 78-83)

J. Von Geibler, K. Wiesen, R.S. Mostyn, M. Werner, N. Riera, D. Su, S. Björling, T. Domen, J.

Smith, A. Jenkins and S. Kresse (EU FP7 myEcoCost project)

Standardization – The key for more transparency and sustainability in the production and

flow of goods? (for extended abstract and PPT print-out, see the special session proceedings)

S Kresse (EU FP7 EcoCost project; GS1 Germany GmbH, Germany)

Life Cycle Assessment on application scenarios for ecoCost calculation method (for extended

abstract and PPT print-out, see the special session proceedings)

G. Salvia, D Su and Z Ren (EU FP7 myEcoCost project; Nottingham Trent University, UK)

Using a Product Footprinting Approach to Deliver Sustainable Consumer Products (for

extended abstract and PPT print-out, see the special session proceedings)

A. Jenkins (EU FP7 myEcoCost project; Boots UK)

Sustainable Practice in Agriculture to Mitigate Climate Change (for extended abstract and PPT

print-out, see the special session proceedings)

J. Smith (EU FP7 myEcoCost project; Scilly Organic Farm, UK) and R. Mostyn (EU FP7

myEcoCost project; RSM, UK)

B1: Special Session ‘Gearing and Transmissions’ (1)

10:35-12:40, 26th

September. Room B.

Session organizer: IFToMM Technical Committee of Gearing and Transmissions

Chair: Professor Frank H Schaefer, HAW Hamburg University of Applied Sciences, Germany

Implications of Contact Parameters on the Dynamics of Chain Drives (KEM, pages 367-370)

C. Pereira

Investigation of the Operational Behaviour of Wide V-Belts in CVT Applications (KEM, pages

413-416)

F. Schaefer

8

On the Development of a Manipulator Type Parallelogram 3-DOF for the Optimization

Trajectory (KEM, pages 417-420)

V.H. López Enríquez, V. Granados Alejo, R. Martín Del Campo Vázquez and F.J. Santander

Bastida

The Effect of Bearing Surface Finish on Engine Performance (KEM, pages 380-383)

D. Nyamugure, D. G. Cheshire and A. Barber

Design and Analysis of a Novel 5 Dimensional Active Vibration Isolator with Parallel

Mechanism (KEM, pages 425-428)

J. Liu, S. Wang, B. Li and Y. Hu

C1: Special Session ‘Sustainable Lighting’ 10:35-12:40, 26

th September. Room C.

Session Organizer: EU CIP Eco-innovation Ecolights project consortium

Chair: Professor L. Montelius, Lund Lighting Initiative and aaxsus LED lighting, Sweden

Comparative analysis of LED commercial lighting systems (KEM, pages 54-57)

J. Leijting

Assessment of Low Cost, Sustainable, Reflective Layers for Optical Mixing (KEM, pages 62-

65)

W. Peels

Intelligent Lighting and the Materials Gap: Business opportunities as a consequence of the

deployment of SSL -but for whom? ( For extended abstract and PPT print-out, see the special

session proceedings)

L. Montelius, R. Karlsson, T.Wingren and J. Sjövall (EU CIP Ecolights project, aaxsus LED

Lighting and Lund Lighting Initiative, Sweden)

Analysis of consumer behaviour through user queries to improve Lighting Products Green

Marketing Strategies in United Kingdom and Spain (for extended abstract and PPT print-out,

see the special session proceedings)

J. Serrano-Cobos, N. L. Romero, M. M. Carbonell, L. F. Aquino, D. M. Escribano (EU CIP

Ecolight project; Universitat Politècnica de València, Spain)

Eco-lighting product design (for extended abstract and PPT print-out, see the special session

proceedings)

J. Casamayor, S. B. Gowder, D. Su, P. Johnson (EU CIP Ecolights project; Nottingham Trent

University, UK), and J. Costa (EU CIP Ecolights project; Ona Product S. L., Spain)

Improving the lifespan of LED lighting products (for extended abstract and PPT print-out, see

the special session proceedings)

E. Quarm, D. Su and J. Casamayor (EU FP7 cycLED project; Nottingham Trent University, UK)

12:40-13:30 Lunch

Session A2: Special Session ‘Environmental Accounting’ (2)

13:30-15:35, 26th

September. Room A.

Session Organiser: EU FP7 myEcoCost Project consortium

Chair: Dr J. Von Geibler, Wuppertal Institute, Germany

Environmental Impact Assessment: Challenges in use of Methods and Tools in France and in

Russia (KEM, pages 40-43)

N. Sirina, S. Rohmer and E. Fortyguina

9

Product Innovations and Eco-Sustainability: An Approach to Evaluate the Relationships

(KEM, pages 74-77)

A. Papetti, M. Germani and M. Mandolini

Improving Green Product Design with Closed-Loop Product Recovery Information (KEM,

pages 12-15)

Y.T. Ng, W.F. Lu and B. Song

Methodology for an Integrated Life Cycle Approach to Design for Environment (KEM, pages

20-23)

J.S.C. Low, W.F. Lu and B. Song

myEcoCost Software Architecture Overview (for extended abstract and PPT print-out, see the

special session proceedings)

F. Kuehndel (EU FP7 myEcoCost project; TriaGnoSys GmbH, Germany)

Challenges for development of consumer device software for myEcoCost project(for extended

abstract and PPT print-out, see the special session proceedings)

S. E. Björling (EU FP7 myEcoCost project; Enviro Data, Sweden)

B2: Special Session ‘Gearing and Transmissions’ (2)

13:30-15:35, 26th

September. Room B.

Session organizer: IFToMM Technical Committee of Gearing and Transmissions

Chair: Professor Vilmos V. Simon, Budapest University of Technology and Economics, Hungary

Optimal Tooth Surface Modifications in Face-Hobbed Hypoid Gears (KEM, pages 351-354)

V. Simon

Computerised Tooth Profile Generation of Conjugated Involute Internal Gears (KEM, pages

355-358)

C. Fetvaci

On Strain of Gear Meshing Thermo-mechanical Coupling (KEM, pages 359-362)

Y. Hu, F. Zhang and Y. Shao

Prediction of Heat Generation and Temperature Distribution in High Speed Preloaded Ball

Screws (KEM, pages 363-366)

A. Oyanguren, I. Ulacia, J. Larrañaga, A. Gallo and A. Arana

Shear Traction and Sticking Scope of Frictional Contact between Two Elastic Cylinders

(KEM, pages 388-392)

Y. Zhao, Q. Wang and Y. Zhang

Coupling Effect between Gear Backlash of Friction Plate and Axial Separation Gap in Multi-

Friction Pairs (KEM, pages 471-475)

Shenlong Li, Jiangli Pan and Xinyuan Zhao

C2: Finite/Boundary Element Methods

13:30-15:35, 26th

September. Room C.

Chair: Professor Dongyan Shi, Harbin Engineering University, China

Analysis of Functionally Graded Rectangular Plate by ANSYS (KEM, pages 505-508)

W. Helal and D. Shi

10

Dynamic Analysis of T-Shaped Plate with General Boundary Conditions (KEM, pages 509-

512)

D. Shi, Q.S. Wang and X. Shi

Research on Evolutionary Topology Optimization in ANSYS (KEM, pages 547-550)

D. Shi, J. Han, L. Kong and L. Lin

Fatigue Life Analysis of Wire Rope Strands with Finite Element Method (KEM, pages 513-

516)

I. Gerdemeli, S. Kurt and A.S. Anil

Design and Finite Element Analysis of Gantry Crane (KEM, pages 517-520)

I. Gerdemeli and S. Kurt

FEM Analysis of Helical Rolling of Steel Balls (KEM, pages 525-528)

Z. Pater

15:35 – 15:50 Coffee/tea break

Session A3: Eco- Design and Sustainable Technology

15:50-18:20, 26th

September. Room A.

Session Chair: Dr. Mathew Watkins, Nottingham Trent University, UK

A Conceptual Model for Sustainable Product Design (KEM, pages 3-6)

A. Romli, P. Prickett, R. Setchi and S. Shoe

Eco-Design of a Basin Mixer in Geometric Modeling Phase (KEM, pages 7-11)

R. GAHA, A. BENAMARA and B. YANNOU

Defining the Social Dimension of Sustainability in Product Design (KEM, pages 24-27)

M. Watkins

Case Studies of Taiwans Fuel Cell System Demonstration Program (KEM, pages 50-53)

C. Liu, Y. Lin, C. Yang and S. Huang

Epistemic and Methodological Challenges of Dynamic Environmental Assessment : A Case-

Study with Energy Production from Solar Cells (KEM, pages 535-538)

B. Laratte and B. Guillaume

Analysis of the Barriers to Environmental Management Systems Implementation in the

Libyan Oil Industry (KEM, pages 672-677)

A. Irhoma, D. Su and M. Higginson

B3: Engineering Design

15:50 – 18:20, 26th

September. Room B.

Chair: Dr Amin Al-Habaibeh, Nottingham Trent University, UK

Simulation Research on Small Scale Wind Power Generation System connected to DC Microg

rid (KEM, pages 165-168)

S. Qian, Y. Xiong, Y. Zhan, J. Xu and X. Shen

An Experimental Stress Analysis of a Jib Crane (KEM, pages 173-176)

A. Candas, S. Kurt, I. Gerdemeli and E. Kayaoglu

Experimental Sress Analysis of Elevator Guiding Equipment (KEM, pages 177-180)

M. Altuntas, O. Salman and C.E. Imrak

11

Free In-Plane Vibration Analysis of Annular Plates with General Boundary Conditions (KEM, pages 189-192)

D. Shi, X. Shi, W.L. Li and Z. Qin

Influence of the thermal assembly process on the stress distributions in shrink fit joints (KEM,

pages 205-208)

M. Lorenzo, J.C. Pérez Cerdán and C. Blanco

Interference Fit Stress Concentrations with Full Chamfered Hub (KEM, pages 209-212)

J.C. Pérez Cerdán, M. Lorenzo and C. Blanco

Parametric Camshaft Mechanism for Adaptive Building Envelope and Kinetic Building

Ornaments (KEM, pages 225-228)

F.U. Sjarifudin

C3: Production Engineering

15:50-18:20, 26th

September. Room C.

Chair: Professor Dein Shaw, National Tsing Hua University, Taiwan

Production Scheduling for Sustainable Manufacturing Systems (KEM, pages 235-238)

S. Ichoua and A. Pechmann

Combined Design of a Compact Production System and Services for Sustainability (KEM,

pages 70-73)

N. Mishima

Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-

Microfactory Environment (KEM, pages 245-248)

E. Järvenpää, M. Lanz and R. Tuokko

The Mechanism of Electrochemical Discharge (ECD) (KEM, pages 295-299)

M. Karnik, A. Ghosh and R. Shekhar

Rule Extraction from Support Vector Machine and its Application to Hot-Dip Galvanizing (KEM, pages 300-303)

J. Wang, B. Yang, W. Zhang and B. Qin

Accelerated Production of White Pepper Using Integrated Mechanical and Enzymatic

Solutions in an Automated Machine (KEM, pages 304-307)

B.A. Muhamad Fadzli, B.I. Mohd Danial, A.H. Awang Ahmad Sallehin and B.Z. Azham

27th

September

A4: Robots and Engineering Management

9:00-10:50, 27th

September. Room A

Chair: Professor E. ilhan Konukseven, Middle East Technical University, Turkey

A Review of Problems Faced by ERP Consultancy and Client Organizations in China (KEM,

pages 690-694)

J. Hou

Effective Management of Engineering Project Using 4Es Model (655-658)

G. Agyekum-Mensah, A. Knight, C. Pasquire and C. Coffey

Track Link-Terrain Interaction Simulation Based on Terramechanics (KEM, pages 640-643)

G. Li, L. Dai, M. Xu and F. Shi

12

Design and Implementation of a 3D Range Scanner for Mobile Robots (KEM, pages 644-647)

G. Aslan, E.I. Konukseven and B. Koku

Integrated Approach for Multi-Robot Spot-Welding Cell Design and Welding-Point

Allocation (KEM, pages 648-651)

S. Pellegrinelli, N. Pedrocchi, L. Molinari Tosatti and T. Tolio

B4: Product/Industrial Design and Design Methodologies (1)

9:00-10:50, 27 September. Room B.

Chair: Dr Zhen Shang, Harbin Engineering University, China

Information Flows and Design Intent in the Core of Future Product-Services in the Field of

Manufacturing Industry (KEM, pages 103-106)

M. Lanz, E. Järvenpää and P. Andersson

Framework of Man-Machine-Environment Application System Engineering throughout Life

Cycle of Large Scale Vessel (KEM, pages 107-110)

Z. Shang, S. Zhu and C. Qiu

Formalization of Reconfigurable Mechanisms in Task Based Conceptual Design Method

(KEM, pages 111-114)

H. Darbinyan

Coordination of Design Processes in Two Perspectives of Computer Aided Design (KEM,

pages 119-122)

L. Kotulski, A. Sędziwy and B. Strug

Study of the technical feasibility and design of a mini head screw extruder applied to filament

deposition in desktop 3-D printer (KEM, pages 151-154)

M. Freitas, I.N. Paulo, J. Silva, J.v., P. Noritomi and Z.D.C. Silveira

C4: Optimisation, Simulation and Computing Technologies

9:00-10:50, 27th

September. Room C.

Chair: Professor Shifan Zhu, Harbin Engineering University, China

Classification of Mutation Operators Applied to Design Models (KEM, pages 539 - 542)

J. Strug

Mutation Testing Approach to Evaluation of Design Models (KEM, pages 543-546)

J. Strug

Simulation Study on Feed Rate Optimization Technique Based on Generalized Predictive

Control (KEM, pages 555-558)

X. Li, H.B. Liang and S. Zhang

New Virtual Application for Improving the Students Understanding of Ternary Phase

Diagrams (KEM, pages 578-581)

D. Vergara, M.P. Rubio and M. Lorenzo

Interactive virtual platform for simulating a concrete compression test (KEM, pages 582-585)

D. Vergara, M.P. Rubio and M. Lorenzo

10:50-11:00 Tea/coffee Break

13

A5: Special session ‘Machine Condition Monitoring’ (1)

11:00-13:10, 27th

September, Room A

Session Organisor: EU FP7 Marie Curie IIF project AgitatorCBM

Chair: Professor Yimin Shao, EU FP7 Marie Curie II Fellow, State Key Laboratory of

Mechanical Transmission, Chongqing University, China

Intelligent Design and Control of Outdoor Lighting, Complexity Issues (KEM, pages 494-498)

I. Wojnicki and L. Kotulski

Prophase Failure Prediction of the Mechanical Transmission Systems Based on the Biological

Evolutionary Algorithm (KEM, pages 447-450)

X. Chen, L. Xiao and Z. Liu and C. Liu

An Energy-Efficiency Wireless Sensing Method for Mechanical Failure Signal (KEM, pages

451-454)

X. Liu, S. Han, Y. Zhou and Y. Yao

An Time-Efficiency Multi-Channel MAC Protocol for Wireless Sensor Networks (KEM, 455-

458)

S. Han, X. Liu, Y. Yao and Y. Zhou

Investigating the Design of Condition Monitoring Systems to Evaluate Surface Roughness

under the Variability in Tool Wear and Fixturing Conditions (KEM, pages 467-470)

J. Abbas, A. Al Habaibeh and D. Su

Research on the Optimization Method of the Friction Plate Backlash (KEM, pages 476-479)

S. Li, L. Gao and H. Zhang

B5: Product/Industrial Design and Design Methodologies (2) 11:00 – 13:10, 27

th September. Room B.

Chair: Dr Jiachen Hou, Strathclyde University, UK

An Ontology-Based Framework for Ergonomics Knowledge Classification and

Representation (KEM, pages 127-130)

Y. Jiang, S. Zhu and Z. Shang

A Design of an Optical System of Liquid Filled Lens which can Adjust the Focus (KEM, pages

131-134)

D. Shaw and H. Hsieh

Prosthesis Analysis Based on TRIZ (KEM, pages135-138)

R.I. Flores-Luna, J.M. Dorador- González and A. Espinosa-Bautista

Graph Based Method for the Modelling of Crumpled Structures (KEM, pages 147-150)

S. Rohmer, A. Merat, V. Floderer and A. Copinet

State of the Art and Analysis of Design for Assembly of Large and Heavy Parts (KEM, pages

253-256)

H.L. García-Guerra and J.M. Dorador-González

C5: Special Session ‘Manufacturing Informatics’

11:00-13:10, 27th

September. Room C.

Session organizer: International Journal of Design Engineering

Chair: Elhadj Benkhelifa, Staffordshire University, UK

14

Advanced Design Optimisation by means of Multiobjective Evolutionary Algorithms: The

Case of two Real World Applications (KEM, pages 589-592)

E. Benkhelifa, A. Tiwari and M. Abdel-Maguid

Locator Layout Optimization for Checking Fixture Design of Thin-walled Parts (KEM, pages

593-596)

X. Zhou, W. Liu, Q. Niu, P. Wang and K. Jiang

A Sugeno-type Fuzzy Expert System for Rough Turning (KEM, pages 597-600)

J. Ratava, P. Luukka, M. Lohtander and J. Varis

Façade Optimisation Using a Point Equilibrium Methodology (KEM, pages 601-604)

D. G. Cheshire, R. Edmondson and P. Savidge

The Capability of the Laser Based Additive Manufacturing Process in the Manufacture of

Fractal like Heat Transfer Devices (KEM, pages 605-608)

M. Lohtander, S. Valkeapää and J. Varis

Monitoring and Digitising Human-Workpiece Interactions during a Manual Manufacturing

Assembly Operation Using Kinect (KEM, pages 609-612)

V. Prabhu, A. Tiwari, W. Hutabarat and C. Turner

13:10 – 14:00 Lunch

A6: Special session ‘Machine Condition Monitoring’ (2)

14:00-15:00, 27th

September, Room A

Session Organisor: EU FP7 Marie Curie IIF project AgitatorCBM

Chair: Professor Yimin Shao, EU FP7 Marie Curie II Fellow, State Key Laboratory of

Mechanical Transmission, Chongqing University, China

Analysis of Vibration Characteristics of Friction Plate Based on Rigid-Flexible Coupling

Model (KEM, 480-484)

Shenlong Li, Jiangli Pan and Huabing Yin

A Method of Chatter Marks Identification Based on Autocorrelation-Threshold (KEM, pages

485-488)

L Wang, Y Yuan and Y Shao

An Ensemble Dynamic Time Domain Averaging Method for Gear Fault Detection without

Tachometer (KEM, pages 439-442)

H. Xiao, X. Zhou and Y. Shao

B6: CAD/CAM/CAE

14:00-16:00, 27th

September. Room B.

Chair: Professor Bing Li, Harbin Institute of Technology, China

Innovative Approach for Teaching Graphical Engineering Focused on CAD/CAM/CAE

Systems (KEM, pages 311-314)

J.C. Pérez Cerdán, M. Lorenzo, A. Reveriego and C. Blanco

Transactional Model of Graph Transformations in Computer Aided Design (KEM, pages 315-

318)

L. Kotulski and B. Strug

15

Numerical Analysis of Feed Rate Influence on Hollow Hub Shape during Rolling Extrusion

Process (KEM, pages 323-326)

J. Bartnicki

Manufacturability of Sheet Metal Design with the Help of Product Data Management (PDM) (KEM, pages 331-314)

M. Huhtala, M. Lohtander and J. Varis

Analysis and Simulation of Deployable Modularized Truss Mechanisms (KEM, pages 429-432)

G. Li, Z. Deng, X. Qi, B. Li and R. Liu

Numerical Simulation and Optimization of Drill Pipe—Martian Soil Model (KEM, pages 613-

616)

H. Xue, Z. Song, J. Zhang, S. Jiang and B. Li

C6: Manufacture and Materials 14:00-16:00, 27

th September. Room C.

Chair: Dr Anton Ianakiev, Nottingham Trent University, UK

Glass Fibre Reinforced Composites from Recycled Polymers (KEM, pages 28-31)

A. Ianakiev and H. Cheah

Service Engineering: A Framework of Integrated Manufacturing System (KEM, pages 231-

234)

Q. Chen, Z. Wu, Z. Deng and L. Luo

An Approach for Manufacturing Process Representation in Product Lifecycle Management

(KEM, pages 239-252)

N. Shariatzadeh, G. Sivard and L. Lindberg

Provision of Long Item Materials (KEM, pages 257-260)

M. Straub, S. Zhang , C. Manz and K. Hapeshi

Effective Forming Processes of Hub Forging from Aluminum Alloy AlCu2SiMn (KEM, pages

265-268)

A. Gontarz

Additive Tooling for Tube Hydroforming (KEM, pages 269-272)

S.P. Soe, D.R. Eyers, C.H. Le and A. Romli

IFToMM ‘Gearing and Transmissions’ Technical Committee meeting

15:00-16:00, 27th

September. Room A.

During the meeting, the work conducted by the committee will be reviewed, and future activities in

the subject area of gearing and transmissions will discussed. Anyone, who is interested in

IFToMM’s activities, welcome to attend the meeting.

28th

September

Tour in Valencia, which will be organized by the conference. Details can be found in other

information section (next section below).

16

6. Other Information Tour

The bus will depart at 9:30 on the 28th

of September from the ‘Plaza de la Reina’ square (please see

‘Tour start area’ in section 3.3 maps to see where is located) The exact point to get onto the bus will

be available at the conference reception desk. Only those who have previously booked for the visit

will be allowed to participate in the visit. If someone, who have registered for the tour, decide not to

attend, they should inform it at the conference registration desk, so other people, who have not

registered but are willing to attend, can join the tour by taking up the space released.

For more information about this tour, please check the Valencia Bus touristic website:

http://www.valenciabusturistic.com/index.php?lang=2.

The tour will take the ‘Ruta B Maritima’ which will begin at ‘Inicio’ (Point 1 in the map), and

will end up in Point 10, and then we will go to the ‘Oceanographic park’ (Point 5 in the map). For

more information about the route, please see the map below:

The bus tour will end up in the ‘Oceanographic park’, which we will visit. For more information

about the ‘Oceanographic park’ please see the website:

http://www.cac.es/oceanografic/?languageId=1

As a condition of participation in the tour, the participant accepts that the safety issues (injury,

accident, etc.) related to the tour are covered by participant's own travel insurance and the policies

of the service providers (the tour bus company and the Oceanogràfic), but are not the conference

organiser's responsibility

Internet

Wireless access for internet is available in the Conference venue area. Please use the following

password: wiadeit13

17

Map of Conference venue, conference hotels and banquet venue and tour start area

18

Addresses of hotels, conference venue and banquet, and tour starting point

Conference venue:

ADEIT – Fundacion Universitaria de Valencia – Principal

Plaza Virgen de la Paz, 3

46001 Valencia

Conference banquet:

Hotel Hospes Palau de la Mar

Calle Navarro Reverter, 14

46004 Valencia

Tour starting point (please see pictures below):

Plaza de la Reina, 8

46001 Valencia

Ayre Hotel Astoria Palace:

Plaza de Rodrigo Botet, 5

46002 Valencia

Hotel SH Ingles:

Calle Marqués de Dos Aguas , 6

46002 Valencia

Red Nest Hostel:

Calle de la Paz, 36

46003 Valencia

19

7. Maps of the conference venue In the third floor the rooms for the presentations will be: Room 3.1 (Room C), Room 3.2 (Room

B) and Room 3.4 (Room A), (Please see map below).

20

In the ground floor the room for the opening session, keynote speeches, presentations and sessions

A1, B1 and C1 will be: Conference room - salon de actos – lecture Theatre (please see map below).