conex compression
TRANSCRIPT
®
Compression system technical specificationsand product range
®
page 2
List of Contents Page
General Information 3
One Fitting for Many Tubes 4
Design 5
Performance 6
Making a Joint 7
High Torque Installations 8
Flanged Fittings 9
Installation Dimensions (capnuts hand tight) 10-12
Product Range 13
Compression Fittings - Brass and DZR 6mm to 108mm 13-17
Accessories for Compression Joints 18-19
Manifolds 20
Matt Chrome Plated Compression Fittings 20-21
ISOCONEX For use with MDPE, PB and PE-X Pipe 22
ISOCONEX Accessories 23
Accessories for use with Imperial Polythene Pipe 23
Copper Tubular Traps 24-25
Bottle Traps 25
Traps - Waste Fittings 26
Accessories 27
Manifolds 27
Stop Valves / Check Valves 28
Draining Taps 28
Fullway Gate Valves to BS5154/B 28
Serviceman Valves to BS6675 28
Plug Taps / Automatic Air Vent / Washing Machine Valve 29
Brass Float Valves 29
Lever Ball Valves 29
®
page 3
Conex type ‘A’ non-manipulative standard compressionfittings are manufactured in accordance with EN 1254-2 and4 (formerly BS 864: Part 2), in sizes from 6mm to 108mm.
Applications and UsesThe versatility of the fitting enables it to be used forconnecting tubes in a wide variety of domestic andcommercial applications such as plumbing, heating, fluiddistribution, air pressure lines and air conditioning. Conexcompression fittings are especially advantageous in retrofitplumbing schemes, where space is confined and/or the useof heat must be avoided. The ability to connect differenttypes of tube is of special importance encouraging users suchas original equipment manufacturers to incorporate Conexcompression fittings within their designs. The fitting’ssimplicity, versatility and speed of installation makes it apopular choice with installers.
Size Availability6mm–108mm, suitable for connecting copper tubes inaccordance with EN 1057 and many other standardsincluding ISO 274.
Fittings are also suitable for connecting low carbon steel,stainless steel and many types of plastic pipe including crossed linked polyethylene (PE-X) and polybutylene (PB)with size compatible outside diameters.
N.B. When using compression fittings with soft copper tubeto EN 1057 - R220 or plastic pipe it is essential that anappropriate tube liner is also fitted.
Imperial copper tube to BS 659 in sizes 3/8", 1/2", 2" and21/2" sizes can be readily joined using 12mm, 15mm, 54mmand 66.7mm fittings respectively. Other sizes can be joinedusing special adaptors in the range.
Reference to our current price list and catalogue will providemore information about the range.
Fitting MaterialsFittings are generally produced in duplex brass but, tocounteract the problem of dezincification and meet certainwater regulation requirements, they are also available, or mayonly be available, in dezincification resistant (DZR) brass oras dezincification immune gunmetal.
Dezincification of ordinary duplex brass fittings may occurunder certain water supply conditions. The Conex DZR rangeof fittings can safely be used in these circumstances.
The DZR alloy, a joint development of manufacturers and theBritish Non-Ferrous Metal Technology Centre, used in thiswide range of compression fittings contains a highly effectivecorrosion inhibitor. It’s an outstanding material, ideally suitedto the high quality standards maintained by IBP, and can beused where dezincification could cause problems.
DZR fittings are marked with the CR symbol, recognised andaccepted by the Water Industry and the British PlumbingFittings Manufacturers’ Association, and now specified inBritish Standards as a mark denoting material of assessedcapability of resistance.
Within this extensive DZR range, a few fittings are retained ingunmetal for technical and commercial reasons.
Where dezincification resistant brass is used, it complieswith the requirements of EN12164 CW602N and EN12165CW602N. Table A provides a list of materials and the relevantEuropean Norme that governs its performance.
Health and SafetyIt is the responsibility of the end user to ensure that adequateprotection is available where required and the necessaryinformation regarding possible health and safety regulationsis adhered to. Copper and copper alloy fittings are considerednon-hazardous under normal circumstances. All per COSHH 4 REG 1988.
Stress Corrosion Within certain environments, particularly those containing acorrosive medium, stress corrosion of duplex brass fittingsmay occur. For further information, please contact ourTechnical Department.
General Information
Material Specification
Brass (Forging) EN12165 CW617N
Brass (Turning) EN12164 CW617N
DZR Brass (Forging) EN12165 CW602N
DZR Brass (Turning) EN12164 CW602N
DZR Brass (Ring Tube) EN12164 CW602N
Gunmetal (Red Brass) DIN50930-6
Table A
®
page 4
One Fitting for Many Tubes
Effecting a joint is simple, requiring nothing more thansuitable spanners whether it be a 6mm or a 108mm fitting.
The symmetrical compression ring seals within the coneangle of the fitting and provides a two-point seal on the tubewhen the capnut is tightened the correct number of turns(Table D, page 15). The joint so made will withstandpressures far in excess of those normally experienced.
To facilitate installations we also offer a range of accessoriesthat reduce torque loading when making a joint in sizes35mm to 76.1mm. Whilst most need only a simplecompression ring change, the 42mm and 54mm require aflanged adaptor set.
Conex compression fittings are especially advantageous inretrofit plumbing schemes, in installations where space isconfined, or when the use of heat must be avoided.
CopperConex compression fittings are capable of joining size-compatible copper tubes that are manufactured inaccordance with EN 1057 (formerly BS 2871: Part 1) andmany other standards including ISO 274.
Stainless SteelConex compression fittings are capable of joining size-compatible stainless steel tubes such as those manufacturedin accordance with BS 4127 and DIN 17455 and 17457.
When the installer is using tube diameters 35mm to76.1mm, it is recommended that our low torque fittings areused.
Medium Density Polyethylene – MDPEWhether you are joining underground (BS 6572) or aboveground (BS 6730), our ISO Conex fittings, valves, liners andadaptors provide a comprehensive range enabling a fast andsecure joint to be made on pipe diameters up to 32mm.
Other Types of Plastic PipeIBP offer a variety of fittings for joining tubes such as cross-linked polyethylene (PE-X) and polybutylene (PB), from simple tube liners to precision made adaptor sets andmanifolds, covering 12mm to 32mm tube outside diameterswith wall thicknesses ranging from 1.3mm to 4.4mm. Thereare also adaptor sets that permit the use of standardcompression fittings. Please contact us for more details aboutthis range of fittings.
Quality AssuranceThe Company is a B.S.I. Registered Firm of assessedcapability, Registration Number FM 11836, manufacturing inaccordance with EN ISO 9001:2000.
Conex fittings are manufactured in accordance with EN1254-2 and 4 (formerly BS 864: Part 2 and 4).
Most fittings in the range are covered by the B.S.I. Kitemarkunder Licence No. KM 07283 (detailed list available uponrequest). Listing can also be found in the WRAS WaterFittings and Materials Directory under ‘Kitemarked andQuality Assured Fittings’.
Conex fittings are also approved by many other European testinstitutions such as KIWA, SITAC, GASTEC, DET NORSKEVERITAS and DVGW.
In addition to audits carried out by the British StandardsInspectorate, an internal audit system is also in operation tofurther enhance quality control.
T H
S
(EN1254) Certificate No. FM 11836
®
page 5
Design
Conex fittings are designed to comply with relevant standardsand to minimise flow restriction.
The symmetrical compression ring provides a seal within thecone of the fitting and a two point seal on the tube.
The simple principle of the Conex compression joint is shownin the following diagram. The compression ring is compressedbetween two differing tapers within capnut and fittingrespectively. The sharper angle of the body taper constitutesa larger area of ring contact in the fitting body, thus reducingany tendency for the tube to revolve as the joint is beingsecured.
Tightening the capnut to secure the joint causes thecompression ring to change form, making a perfect metal xmetal seal that actually indents the tube on both points ofcontact. This ensures a joint that is easily capable ofwithstanding pressures far in excess of those experienced innormal usage. In tests on 15mm EN1057-R250 (half hard)the tube bursts without affecting the joint.
Fine threads have been avoided to prevent the danger of crossthreading. Threads on the 8mm, 12mm and 15mmcompression ends are equal to 1/4", 3/8" and 1/2" BSP inaccordance with BS 2779/ISO 228. Other thread sizes are toBS 84 or ISO 7.
Conex unique ribbed pattern capnuts are supplied on 6mm to28mm fittings. Sizes 35mm, 42mm and 54mm are suppliedwith octagonal capnuts. Fittings in 66.7mm, 76.1mm and108mm sizes incorporate loose compression plates, wheretightening is through six 3/8" BSW nuts and allthreads.
For high torque applications, devices are available tofacilitate installation.
Finish AvailabilityApart from the natural finish, fittings are also offered nickelplated or chrome plated in accordance with EN 248.Note: When fittings are to be plated by the customer, it isrecommended that our Technical Department is contacted forguidance.
Connecting ThreadsTaper male threads are in accordance with ISO 7 and EN1254-4. Parallel male threads are in accordance with EN1254-4 and ISO 228.Parallel female threads are in accordance with EN 1254-4(BS 864: Part 2 Clause 4(c)) and ISO 228.Generally, fittings are manufactured with parallel threads butcertain products are offered with taper threads. Reference toour product range will provide more details.
1. Fitting Body2. Capnut
3. Compression ring 4. Tube
The Conex Compression Joint
®
page 6
Performance
Hydraulic working temperatures and pressures shown arebased on EN 1254-2. Table B, prepared from the statedvalues, enables direct reading of intermediate values.Fittings up to and including 28mm can be used at higherpressures than those shown provided that the installationdoes not impart additional tensile loads on the joints. Pleasecontact our Technical Department for further data. They mayalso be used with light mineral oils, L.P.G., natural gas orcompressed air, in accordance with Table C, when assembledwith copper tubes to EN 1057 (formerly BS 2871: Part 1table X, Z, Y).
Water Flow Resistance Through FittingsData is readily available in Publication 33 issued by theCopper Development Association.
Internal ReducersSizes not quoted within our range may be achieved via theuse of internal reducers either as a three piece or one piece configuration. They are manufactured from DZR(dezincification resistant material CR) or gunmetal, therebybeing resistant or immune to dezincification.N.B. one piece reducers are not designed for use with plasticpipes.The minimum number of turns required is based on thereduced diameter. Thus for a 22mm x 15mm reducer, referto Table D for the number of turns required for 15mm.Reducers rely on a metal x metal seal and care should betaken to avoid damage prior to assembly. Should difficulty beexperienced, the use of a WRAS listed sealant is permitted.COPPER TUBE
POTABLE WATER
Table B
COPPER TUBETemps Max
For Use Tube Not WorkingWith Sizes Exceeding Pressures
Ø mm ˚C Bar
30 1665 10
6 to 54 95 7110 630 10
66.7 65 6to 108
110 4
8 to 28 30 1
8 to 28 30 7
PotableWaterorLightMineralOils
Table C
LPG, Natural Gas
CompressedAir
®
page 7
6mm–54mm1. Ensure that the tube and fitting sizes are compatible. Cut
the tube end square but ensure tube retains its shape.The tube will then make even contact with the tube stopin the body of the fitting. The use of an appropriate tubecutter is recommended where practicable.
2. Remove any burrs from the tube, both inside and out.
3. Where necessary, insert a suitable tube liner.
4. One of two methods can be employed for making thejoint.
a) The tube can be firmly inserted into the Conexcompression fitting without removing the capnut andcompression ring.
Care should be taken to ensure that the compression ringis in the correct position and that the tube makes firmcontact with the tube stop in the body of the fitting.
b) The capnut and compression ring can be removed, locatedonto the tube in logical sequence, and the tube fullyinserted into the Conex compression fitting.
5. In both cases, tightening of the capnut is effected by handas far as possible, followed by the recommended minimumnumber of turns (refer to Table D) with a suitable spanner.Tools with serrated jaws should not be used. A few dropsof light oil applied to the screw thread before tighteningthe nut will reduce the load required to reach the numberof turns. This is particularly applicable to the larger sizes.
N.B. When joining soft copper tube to EN 1057-R220 orplastic pipes, it is essential that an appropriate tube lineris also fitted.
The Conex compression joint makes a metal x metal sealwhich normally eliminates the need for jointingcompounds and sealants. On larger sizes, particularly54mm, it may be necessary to use an additional WRASapproved sealant. Jointing instructions, when usingsealant, are available from our Technical Department.
Making a Joint
®
page 8
High Torque Installations
IBP has designed devices to reduce tightening torque for35mm to 76.1mm applications. They are particularly usefulwhere space is restricted and/or stainless steel tube is beingjoined. When using stainless steel tube, water qualityapproved PTFE coated compression rings must be used onsizes 35mm and above. Whilst most sizes are a simplecompression ring change, we recommend that 42mm and54mm sizes use a flanged adaptor set comprising one flange,one compression plate, four allthreads, four nuts and onePTFE coated compression ring. Assembly is commenced bydiscarding the standard capnut and compression ring andsecuring the threaded flange to the exposed end of the fittingand is completed by following the instructions for flangedfittings 66.7mm –108mm.Note: The installation procedures within this brochure aregenerally for water applications. Installation procedures mayvary for non-water applications and other tube materialspecifications. In these cases you are advised to contact ourTechnical Department for clarification.
Assembly of Coned Joints and Screwed FittingsConed JointsCone face connectors to EN 1254-4 (BS 864: Part 2) rely ona metal x metal seal and care should be taken to avoiddamage prior to assembly. Should difficulty be experienced,the use of a WRAS listed sealant is permitted. Do notovertighten.
Threaded Joints for Liquid ApplicationsThe use of a WRAS listed sealant or tape (e.g. PTFE) isrecommended for making joints on fittings with taper malethreads. For making joints with parallel connector threads, agood quality washer made from a WRAS listed materialshould be used. Suitable washers are supplied with Conex tapconnector fittings and these should be used.
Threaded Joints for Gas ApplicationsAn approved gas sealant must be used for making joints onfittings with taper male threads and female parallel threads.
6mm 28mmto 22mm to
18mm 54mm
EN1057-R250 No of turns 11⁄4 1 3⁄4
(Half Hard) Liner none none none
EN1057-R290 No of turns 1 3⁄4 1⁄2
(Hard)Liner none none none
SIZE ä 8mm 10mm 15mm 18mm 22mm
EN1057-R220 No of turns 11⁄4 11⁄4 11⁄4 11⁄4 1
Liner: SC1 8 x 1.0 10 x 1.0 15 x 1.0 18 x 1.0 22 x 1.0
6mm 35mm 67mmSIZE ä to 28mm to to
22mm 54mm 76.1mmBS4127
No of turns 3⁄4 1⁄2 1⁄2* *Liner none none none none
SIZE ä 10mm 15mm 22mm 28mm
POLYBUTYLENE (PB) No of turns 11⁄2 11⁄2 11⁄2 11⁄2
Liner: PP 10 x 1.5/1.8 15 x 1.7/2.0 22 x 2.0/2.3 28 x 2.6/2.9
CROSS LINKEDSIZE ä 10mm 15mm 22mm 28mm
No of turns 11⁄2 11⁄2 11⁄2 11⁄2POLYETHYLENE (PE-X)
Liner: PP 10 x 1.5/1.8 15 x 1.5/1.8 22 x 2.0/2.3 28 x 2.6/2.9
MEDIUM DENSITYSIZE ä 20mm 25mm 32mm
POLYETHYLENE (MDPE)No of turns 11⁄2 11⁄2 11⁄2
Liner: PY 20 x 2.3/2.6 25 x 2.3/2.6 32 x 3.0/3.4
FLEX
IBLE
SOFT
COPP
ER
TUBE MATERIAL SPECIFICATION SIZE ä
Table D
PLEASE CONSULT OUR TECHNICAL DEPARTMENT WHEN USING OTHER MATERIALS.* When using tube diameters 35mm to 76.1mm, it is recommended that our low torque fittings are used. Please refer to our Technical Department.
STAI
NLES
SST
EEL
HALF
HAR
DAN
D HA
RD C
OPPE
R
®
page 9
Flanged Fittings
66.7mm - 108mm
1. Ensure that the tube and fitting sizes are compatible. Cutthe tube end square but ensure tube retains its shape. Thetube will then make even contact with the tube stop in thebody of the fitting.
2. Remove any burrs from the tube, both inside and out.
3. One of two methods can be employed for making the joint.
a) The tube can be firmly inserted into the Conexcompression fitting without removing the compressionplate and compression ring.Care should be taken to ensure that the compression ringis in the correct position and that the tube makes firmcontact with the tube stop in the body of the fitting.The 3/8" BSW nuts are then tightened until hand tight andthe same amount of allthread shows through each nut.
b) The compression plate and compression ring can beremoved by first unscrewing the 3/8" BSW nuts. Then bylocating the compression plate and compression ring ontothe tube in logical sequence, the tube is inserted into thefitting, or fitting onto the tube, until positive contact isreached. The compression ring and compression plate arethen correctly situated in their original position, the nutsare replaced and tightened until hand tight and the sameamount of allthread shows through each nut.
4. In both cases the nuts are then further tightened aminimum of 2 full turns in increments of 1/2 a turn only,on each position in the sequence shown in the diagram. Toavoid overtightening the maximum number of turns is 21/2.
1. Fitting 4. Compression Plate2. Allthread 5. Nut3. Compression Ring 6. Tube
Note: The compression plate before and after correctassembly should be parallel to the face of the fitting body.
6 1 2 3 4 5 6
®
page 10
Installation Dimensions (capnuts hand tight)
N.B. Conex capnuts greater than 28mm will have octagonal external form.For other dimensional data, please contact our Technical Department.
ASize (mm)15 21.822 25.428 26.035 30.0
302 or S302 STRAIGHT COUPLERConex x Male Thread (Parallel)
A B CSize (mm) (BSP) (mm)
15 x 1/2 15 1/2 37.522 x 3/4 22 3/4 42.522 x 1 22 1 41.528 x 1 28 1 45.0
63 CAPNUT
A (mm) BSize Maximum Minimum (mm)15 24.55 24.33 27.322 32.74 32.53 36.528 39.16 38.94 45.235 46.85 46.35 50.0
303 or S303 STRAIGHT COUPLERConex x Female Thread (Parallel)
A B CSize (mm) (BSP) (mm)
15 x 1/2 15 1/2 39.522 x 3/4 22 3/4 43.522 x 1 22 1 49.028 x 1 28 1 48.0
301 or S301 STRAIGHT COUPLERConex x Conex
A B CSize (mm) (mm) (mm)
15 x 15 15 15 44.322 x 15 22 15 50.522 x 22 22 22 52.028 x 28 28 28 53.5
303SF or S303SF STRAIGHT COUPLER
Conex x Swivel Female Thread
A B CSize (mm) (BSP) (mm)
15 x 1/2 15 1/2 44.015 x 3/4 15 3/4 44.522 x 3/4 22 3/4 48.028 x 1 28 1 49.0
COMPRESSION ENDTUBE STOP DIMENSIONStandard for all Components
®
page 11
N.B. Conex capnuts greater than 28mm will have octagonal external form.For other dimensional data, please contact our Technical Department.
321 or S321 TANK CONNECTORConex
A B CSize (mm) (mm) (mm)15 15 35.0 49.022 22 43.0 46.028 28 49.0 48.035 35 56.5 45.5
402 or S402 ELBOWConex x Male Thread (Parallel)
A B C DSize (mm) (BSP) (mm) (mm)
15 x 1/2 15 1/2 25.7 34.022 x 3/4 22 3/4 32.0 37.522 x 1 22 1 34.5 42.728 x 1 28 1 38.5 43.2
323 or S323 STOP ENDConex
A BSize (mm) (mm)15 15 26.022 22 27.028 28 31.035 35 34.7
403 or S403 ELBOWConex x Female Thread (Parallel)
A B C DSize (mm) (BSP) (mm) (mm)
15 x 1/2 15 1/2 15.3 34.322 x 3/4 22 3/4 28.5 39.422 x 1 22 1 30.5 42.628 x 1 28 1 35.1 43.9
401 or S401 ELBOWConex x Conex
A B C DSize (mm) (mm) (mm) (mm)
15 x 15 15 15 31.5 31.522 x 22 22 22 36.9 36.928 x 28 28 28 41.9 41.935 x 35 35 35 48.2 48.2
403SF or S403SF ELBOWConex x Swivel Female Thread
A B C DSize (mm) (BSP) (mm) (mm)
15 x 1/2 15 1/2 27.4 31.415 x 3/4 15 3/4 33.5 29.522 x 3/4 22 3/4 32.0 36.528 x 1 28 1 44.0 41.0
®
page 12
N.B. Conex capnuts greater than 28mm will have octagonal external form.For other dimensional data, please contact our Technical Department.
615 or S615 TEEConex x Conex x Male Thread (Parallel)
A B C D ESize (mm) (mm) (BSP) (mm) (mm)
15 x 15 x 1/2 15 15 1/2 25.7 68.015 x 15 x 3/4 15 15 3/4 34.0 75.522 x 22 x 3/4 22 22 3/4 32.6 77.028 x 28 x 1 28 28 1 39.7 89.6
A B C DSize (mm) (BSP) (mm) (mm)
15 x 1/2 15 1/2 41.8 33.822 x 1/2 22 1/2 47.0 36.922 x 3/4 22 3/4 54.0 38.028 x 1 28 1 65.0 44.0
617 or S617 TEEConex x Conex x Female Thread (Parallel)
A B C D ESize (mm) (mm) (BSP) (mm) (mm)
15 x 15 x 1/2 15 15 1/2 25.4 66.215 x 15 x 3/4 15 15 3/4 26.2 74.122 x 22 x 3/4 22 22 3/4 28.5 78.228 x 28 x 1 28 28 1 35.0 85.8
601EQ or S601EQ TEE-EQUALConex All Ends
A B C D ESize (mm) (mm) (mm) (mm) (mm)
15 x 15 x 15 15 15 15 31.5 63.022 x 22 x 22 22 22 22 36.9 73.828 x 28 x 28 28 28 28 41.9 83.835 x 35 x 35 35 35 35 48.2 96.4
684 or S684 TEEConex x Female Thread (Parallel) x Conex
A B C D ESize (mm) (BSP) (mm) (mm) (mm)
15 x 1/2 x 15 15 1/2 15 33.0 55.022 x 1/2 x 22 22 1/2 22 37.0 63.022 x 3/4 x 22 22 3/4 22 39.5 65.728 x 1 x 28 28 1 28 45.0 79.0
601 or S601 TEE-UNEQUALConex All Ends
A B C D ESize (mm) (mm) (mm) (mm) (mm)
22 x 15 x 15 22 15 15 34.3 65.922 x 15 x 22 22 15 22 36.9 70.222 x 22 x 15 22 22 15 34.3 69.728 x 28 x 15 28 28 15 37.9 68.2
403WL or S403WL WALL PLATE ELBOW
Conex x Female Thread (Parallel)
®
page 13
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
301 Straight Coupler - 6S301 Conex x Conex - 8
- 1012 1215 1518 1822 2228 2835 35- 42- 54
Straight Coupler - 67Conex x Conex - 76
- 108
301 Reduced Straight Coupler - 8 x 6S301 Conex x Conex - 10 x 8
- 12 x 8- 12 x 10- 15 x 8- 15 x 10
15 x 12 15 x 12- 16 x 15
18 x 12 -- 18 x 15
22 x 15 22 x 1522 x 18 -
- 28 x 1528 x 22 28 x 22
- 35 x 22- 35 x 28
301BH Straight Coupler Bulkhead 15 -Conex x Conex 22 -
301BP Straight Coupler Burst 12 x 100 -Pipe Repair 15 x 100 -Conex x Conex 18 x 100 -
22 x 100 -
S301C0 Crossover - 15Conex x Conex - 18
- 22
301DA Straight Coupler with Drain Tap 15 -Conex x Conex 22 -
S301M Imperial to Metric - 3 x 76Straight CouplerConex x Conex
Product Range
301V Straight Coupler 15 -with Air VentConex x Conex
302 Male Straight Connector - 6 x 1/8
S302 Conex x Male Thread - 8 x 1/4
(Parallel ISO 228) - 8 x 3/8
- 8 x 1/2
- 10 x 1/4
- 10 x 3/8
- 10 x 1/2
12 x 1/4 -12 x 3/8 12 x 3/8
12 x 1/2 12 x 1/2
15 x 1/4 -15 x 3/8 15 x 3/8
15 x 1/2 15 x 1/2
15 x 3/4 15 x 3/4
18 x 1/2 18 x 1/2
18 x 3/4 18 x 3/4
22 x 1/2 22 x 1/2
22 x 3/4 22 x 3/4
22 x 1 22 x 1- 28 x 3/4
28 x 1 28 x 128 x 11/4 -
- 35 x 135 x 11/4 35 x 11/4
42 x 11/2 42 x 11/2
54 x 2 54 x 2
- 67 x 21/2
- 76 x 3- 108 x 4
302B Extended Male Straight 15 x 1/2 x 22 -S302B Connector with Back Nut 22 x 3/4 x 22 -
Conex x Male Thread x 28 x 1 x 22 -Tail Length (mm) 35 x 11/4 x 22 -
42 x 11/2 x 22 -54 x 2 x 25 -
- 67 x 21/2 x 80- 76 x 3 x 80
302CB Extended Male Straight 15 x 1/2 x 38 -Connector with Back 22 x 3/4 x 38 -Nut (Long)Conex x Male Thread x 28 x 1 x 44 -Tail Length (mm)
COMPRESSION FITTINGS - Brass and DZR 6mm to 108mm
®
page 14
302TA Male Straight Connector - 10 x 3/8
S302TA Conex x Male Taper Thread - 10 x 1/2
to ISO 7 12 x 3/8 -12 x 1/2 -15 x 3/8 -15 x 1/2 -15 x 3/4 -18 x 1/2 -18 x 3/4 -22 x 1/2 -22 x 3/4 -22 x 1 -28 x 3/4 -28 x 1 -
303 Female Straight Connector - 8 x 1/4
S303 Conex x Female Thread - 8 x 3/8
(Parallel ISO 228) - 8 x 1/2
- 10 x 1/4
- 10 x 3/8
- 10 x 1/2
12 x 3/8 12 x 3/8
12 x 1/2 12 x 1/2
15 x 3/8 15 x 3/8
15 x 1/2 15 x 1/2
15 x 3/4 15 x 3/4
15 x 1 -18 x 1/2 18 x 1/2
18 x 3/4 18 x 3/4
22 x 1/2 -22 x 3/4 22 x 3/4
22 x 1 22 x 1- 28 x 3/4
28 x 1 28 x 128 x 11/4 -
- 35 x 1- 35 x 11/4
- 42 x 11/2
- 54 x 2
- 67 x 21/2
- 76 x 3
303SC Cylinder Straight Connector 22 x 1 -Conex x Swivel Female Thread
303SF Straight Tap Connector 15 x 1/2 15 x 1/2
S303F Conex x Swivel Female Thread - 15 x 3/4
22 x 3/4 22 x 3/4
303ST Female Straight Connector 15 x 1/2 -for Pillar Taps 15 x 3/4 -Conex x Female Thread 22 x 3/4 -(Parallel ISO 228)
321 Tank Connector 15 15S321 Conex 22 22
28 2835 -- 42- 54
323 Stop End - 8S323 Conex - 10
12 1215 15- 18
22 2228 28- 35- 42- 54
401 Elbow - 6S401 Conex x Conex - 8
- 1012 1215 1518 1822 2228 2835 3542 4254 54
- 67- 76- 108
401 Reduced Elbow - 12 x 10S401 Conex x Conex - 15 x 10
15 x 12 -18 x 15 -22 x 15 22 x 15
- 28 x 15- 28 x 22- 54 x 28
401DA Elbow with Drain Tap 15 -Conex x Conex 22 -
28 -
401/0 Obtuse Elbow 15 -Conex x Conex 22 -
28 -
S401S Slow Bend - 15Conex x Conex - 22
- 28
COMPRESSION FITTINGS - Brass and DZR 6mm to 108mm
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 15
401V Elbow with Air Vent 15 -Conex x Conex 22 -
402 Male Elbow - 8 x 1/4
S402 Conex x Male Thread - 8 x 3/8
(Parallel ISO 228) - 10 x 3/8
- 10 x 1/2
- 12 x 3/8
- 12 x 1/2
- 15 x 3/8
15 x 1/2 15 x 1/2
15 x 3/4 15 x 3/4
18 x 1/2 18 x 1/2
- 18 x 3/4
- 22 x 1/2
22 x 3/4 22 x 3/4
22 x 1 22 x 128 x 3/4 -28 x 1 28 x 1
- 35 x 11/4
- 42 x 11/2
54 x 2 54 x 2
- 67 x 21/2
402B Extended Male Elbow with 15 x 1/2 x 22 -Back Nut 22 x 3/4 x 22 -Conex x Male Thread (Parallel ISO 228) x Tail Length (mm)
402DA Male Elbow with Drain Tap 15 x 1/2 -Conex x Male Thread 22 x 3/4 -(Parallel ISO 228)
402CB Extended Male Elbow with 15 x 1/2 x 38 -Back Nut 22 x 3/4 x 38 -Conex x Male Thread (Parallel ISO 228) x Tail Length (mm)
S402S Slow Male Bend - 22 x 3/4
Conex x Male Thread (Parallel ISO 228)
COMPRESSION FITTINGS - Brass and DZR 6mm to 108mm
402TA Male Elbow - 10 x 1/2
S402TA Conex x Male Taper Thread 12 x 3/8 -to ISO 7 12 x 1/2 -
15 x 3/8 -15 x 1/2 -15 x 3/4 -18 x 1/2 -18 x 3/4 -22 x 3/4 -22 x 1 -28 x 1 -
35 x 11/4 -42 x 11/2 -
S402W Male Wall Plate Elbow - 15 x 3/4
Conex x Male Thread (Parallel ISO 228)
403 Female Elbow - 8 x 1/4
S403 Conex x Female Thread - 10 x 3/8
(Parallel ISO 228) - 10 x 1/2
- 12 x 3/8
12 x 1/2 12 x 1/2
- 15 x 3/8
15 x 1/2 15 x 1/2
15 x 3/4 15 x 3/4
18 x 1/2 -18 x 3/4 18 x 3/4
22 x 1/2 22 x 1/2
22 x 3/4 22 x 3/4
22 x 1 -28 x 3/4 -28 x 1 28 x 1
- 35 x 11/4
42 x 11/2 42 x 11/2
- 54 x 2
S403SC Cylinder Elbow - 22 x 1Conex x Swivel Female Thread
403SF Bent Tap Connector 15 x 1/2 15 x 1/2
S403SF Conex x Swivel Female Thread 15 x 3/4 -22 x 1/2 -22 x 3/4 -
403W Female Wall Plate Elbow 12 x 1/2 12 x 1/2
S403W (2 Hole) 15 x 1/2 15 x 1/2
Conex x Female Thread(Parallel ISO 228)
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 16
COMPRESSION FITTINGS - Brass and DZR 6mm to 108mm
403WE Extended Female 15 x 1/2 -Wall Plate 15 x 1/2 -Elbow (3 Hole) Polished/Conex x Female Thread Chrome (Parallel ISO 228) plated
403WL Female Wall Plate Elbow - 10 x 1/2
S403WL (3 Hole) - 12 x 1/2
Conex x Female Thread 15 x 1/2 15 x 1/2
(Parallel ISO 228) 18 x 1/2 -22 x 1/2 -
- 22 x 3/4
601EQ Tee - Equal - 6S601EQ Conex all Ends - 8
- 1012 1215 1518 1822 2228 28- 35- 42- 54
- 67- 76
601 Tee - Reduced Branch - 12 x 12 x 10S601 Conex all Ends - 15 x 15 x 10
- 15 x 15 x 12- 18 x 18 x 12- 18 x 18 x 15- 22 x 22 x 12
22 x 22 x 15 22 x 22 x 15- 22 x 22 x 18
28 x 28 x 15 28 x 28 x 1528 x 28 x 22 28 x 28 x 22
- 35 x 35 x 15- 35 x 35 x 22- 35 x 35 x 28- 42 x 42 x 15- 42 x 42 x 22- 42 x 42 x 28- 42 x 42 x 35
54 x 54 x 15 -54 x 54 x 22 -54 x 54 x 28 54 x 54 x 28
- 54 x 54 x 35- 54 x 54 x 42
- 67 x 67 x 28- 67 x 67 x 35- 67 x 67 x 42- 67 x 67 x 54- 76 x 76 x 28- 76 x 76 x 54
601 Tee - Reduced End - 15 x 12 x 15S601 Conex all Ends - 18 x 15 x 18
22 x 15 x 22 22 x 15 x 2222 x 18 x 22 -28 x 15 x 28 -
- 28 x 22 x 28
601 Tee - Reduced End - 15 x 12 x 12S601 and Branch 18 x 12 x 12 -
Conex all Ends - 18 x 15 x 1522 x 15 x 15 22 x 15 x 1528 x 15 x 15 -
- 28 x 22 x 15- 28 x 22 x 22
601 Tee - Reduced Both Ends - 12 x 12 x 15S601 Conex all Ends - 15 x 15 x 18
15 x 15 x 22 15 x 15 x 22- 22 x 22 x 28
S601C Corner Tee - 15Conex all Ends - 22
S615 Tee with Male Branch - 15 x 15 x 1/2
Conex x Conex x - 22 x 22 x 1/2
Male Thread - 22 x 22 x 3/4
(Parallel ISO 228)
617 Tee with Female Branch - 12 x 12 x 3/8
S617 Conex x Conex x - 12 x 12 x 1/2
Female Thread 15 x 15 x 1/4 -(Parallel ISO 228) 15 x 15 x 1/2 15 x 15 x 1/2
15 x 15 x 3/4 -18 x 18 x 1/2 -18 x 18 x 3/4 -22 x 22 x 1/2 22 x 22 x 1/2
- 22 x 22 x 3/4
22 x 22 x 1 -- 28 x 28 x 1/2
28 x 28 x 3/4 -- 28 x 28 x 1
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 17
S617W Wall Plate Tee with - 15 x 15 x 1/2
Female Thread Branch - 22 x 22 x 1/2
Conex x Conex x Female Thread (Parallel ISO 228)
631 Tee with Male End - 15 x 1/2 x 15S631 Conex x Male Thread - 22 x 3/4 x 22
(Parallel ISO 228) 22 x 1 x 22 -x Conex
645 Tee with Threaded 1/2 x 1/2 x 15 -EndsFemale Threaded (Parallel ISO 228) x Male Thread (Parallel ISO 228) x Conex
684 Tee with Female End - 15 x 1/2 x 15S684 Conex x Female - 18 x 1/2 x 18
Thread 22 x 1/2 x 22 -(Parallel ISO 228) 22 x 3/4 x 22 -x Conex 28 x 1 x 28 -
901 Cross - Equal 15 -Conex all Ends 22 -
Cross - Reduced 22 x 15 x 15 x 15 -Conex all Ends
S61 Blanking Piece - 12- 15- 22
63 Capnut 6 -8 -
10 -12 -15 -18 -22 -28 -35 -42 -54 -3/4 -
11/4 -
67 -76 -
108 -
63B Blank Cap 6 -(Supplied with a 8 -rubber washer) 10 -
12 -15 -18 -22 -28 -35 -42 -54 -
63TV Terminal Air Vent 15 -Capillary Ended
63V Air Vent for 15 -Compression End
COMPRESSION FITTINGS - Brass and DZR 6mm to 108mm
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 18
ACCESSORIES FOR COMPRESSION JOINTS
64LT Low Torque Flanged - 42Adaptor - 54
65LT Low Torque Compression - 35PTFE Coated Ring - 42
- 54
65 Compression Ring - 6- 8- 10- 12- 15- 18- 22- 28- 35- 42- 54- 67- 76- 108- 3/4
- 1- 11/4
- 3
8531 Running Nipple 1/4 -
Male Thread 3/8 -
(Parallel ISO 228) 1/2 -
Replaces Part No. 66 3/4 -
8241 Reduced Bush 3/8 x 1/4 -
Male Thread 1/2 x 1/4 -
(Parallel ISO 228) x 1/2 x 3/8 -
Female Thread 3/4 x 1/4 -
(Parallel ISO 228) 3/4 x 3/8 -
Replaces Part No. 67 3/4 x 1/2 -
1 x 3/8 -
1 x 1/2 -
1 x 3/4 -
11/4 x 1/2 -
11/4 x 3/4 -
11/4 x 1 -
11/2 x 11/2 -
11/2 x 13/4 -
11/2 x 1 -
11/2 x 11/4 -
2 x 1 -
2 x 11/4 -
2 x 11/2 -
S68 Internal Reducer - 8 x 6Single Piece
S68 Internal Reducer - 10 x 8Three Piece - 12 x 8
- 12 x 10- 15 x 8- 15 x 10- 15 x 12- 18 x 12- 18 x 15- 22 x 12- 22 x 15- 22 x 18- 28 x 12- 28 x 15- 28 x 18- 28 x 22- 35 x 15- 35 x 18- 35 x 22- 35 x 28- 42 x 15- 42 x 22- 42 x 28- 42 x 35- 54 x 15- 54 x 22- 54 x 28- 54 x 35- 54 x 42- 67 x 54- 76 x 67
S68E External Reducer - 76 x 42- 76 x 54
S68S Adaptor - 3 x 76Imperial/Metric
S68S Adaptor - 42 x 11/2
Metric/Imperial - 108 x 4
S68SP Internal Reducer - 10 x 8- 12 x 8- 12 x 10- 15 x 8- 15 x 10- 15 x 12- 18 x 10- 18 x 12- 18 x 15- 22 x 12- 22 x 15- 22 x 18- 28 x 12- 28 x 15- 28 x 18- 28 x 22- 35 x 15- 35 x 18- 35 x 22- 35 x 28
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 19
72 Adaptor 1/2 -Male Thread 3/4 -(Parallel ISO 228) x Female Thread (Parallel ISO 228)
8270 Straight Coupler 1/4 -Female Thread 3/8 -(Parallel) x 1/2 -Female Thread 3/4 -(Parallel ISO 228) 1 -Replaces Part No. 73 11/4 -
11/2 -2 -
C73 Adaptor 1/2 x 15 -Female Thread 3/4 x 22 -(Parallel) xConex Female Thread (Parallel ISO 228)
74 Adaptor for Tap Extension 1/2 -Male Thread (Parallel) x 3/4 -Female Thread (Parallel ISO 228)
8310F Backnut 1/2 -Female Thread 3/4 -(Parallel ISO 228)Replaces Part No. 77 1 -
11/4 -11/2 -2 -
S77 Backnut - 21/2
Female Thread - 3(Parallel ISO 228)
C77 Backnut 15 -Conex Female Thread 22 -
28 -35 -42 -54 -
8595 Flanged Plug 1/8 -Male Thread 1/4 -(Parallel Thread ISO 228) 3/8 -Replaces Part No. 78 1/2 -
3/4 -1 -
11/4 -11/2 -2 -
85 Capnut Spanner Zinc Plated 22 x 15 -Conex
85R ‘C’ Capnut Spanner Zinc Plated 22 x 15 -Conex
96 Brass Washer Thread Size(for Male Threaded Ends) 1/2 -
3/4 -1 -
97 Sealing Washer 1/2 -(for Swivel Fittings 3/4 -303SF & 403SF)
98 Rubber Washer 15 -(for Blank Capnuts) 18 -
22 -28 -35 -42 -54 -
ACCESSORIES FOR COMPRESSION JOINTS
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 20
MANIFOLDS
45584 Manifold for 22mm 8 -Tube with CapillaryMain Connecting 10 -Compression Outlets 4 PortMale Copper x Copper x Compression Outlet
45586 Manifold for 22mm 10 -Tube with CapillaryMain Connecting Compression Outlets 6 PortMale Copper x Copper x Compression Outlet
45604 Manifold for 22mm 8 -Capillary TubeConnection with 10 -Capillary Outlets 4 PortCopper x Copper Outlet
301CP Straight Coupler - 10S301CP Conex x Conex Matt Chrome - 12 x 10
Plated - 1215 1522 22- 28- 35
302CP Male Straight Connector 15 x 1/2 15 x 1/2
Conex x Male Thread 22 x 3/4 22 x 3/4
(Parallel ISO 228) - 28 x 1Matt Chrome Plated - 35 x 11/4
302TACP Male Straight Connector 15 x 1/2 -Conex x Male Taper Thread to 22 x 3/4 -ISO 7 Matt Chrome Plated 28 x 1 -
303CP Female Straight Connector 15 x 1/2 15 x 1/2
S303CP Conex x Female Thread 22 x 3/4 22 x 3/4
(Parallel ISO 228) - 22 x 1Matt Chrome Plated - 28 x 1
- 35 x 11/4
S303SFCP Straight Tap Connector - 15 x 1/2
Conex x Swivel Female Thread - 22 x 3/4
Matt Chrome Plated
S323CP Stop End - 15Conex - 22Matt Chrome Plated - 28
401CP Elbow - 10S401CP Conex x Conex - 12
Matt Chrome Plated 15 1522 2228 28- 35
402CP Male Elbow 15 x 1/2 -S402CP Conex x Male Thread (Parallel - 22 x 3/4
ISO 228) Matt Chrome Plated - 28 x 1- 35 x 11/4
MATT CHROME PLATED COMPRESSION FITTINGS
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 21
402TACP Male Elbow 15 x 1/2 -Conex x Male Taper 22 x 3/4 -Thread to ISO 7Matt Chrome Plated
403CP Female Elbow 15 x 1/2 15 x 1/2
S403CP Conex x Female Thread - 22 x 3/4
(Parallel ISO 228) - 28 x 1Matt Chrome Plated - 35 x 11/4
403SFCP Bent Tap Connector - 15 x 1/2
S403SFCP Conex x Swivel Female 22 x 3/4 -ThreadMatt Chrome Plated
403WCP Female Wall Plate Elbow 15 x 1/2 15 x 1/2
S403WCP (2 Hole)Conex x Female Thread (Parallel ISO 228) Matt Chrome Plated
403WLCP Female Wall Plate Elbow - 22 x 3/4
S403WLCP (3 Hole)Conex x Female Thread (Parallel ISO 228)Matt Chrome Plated
601EQCP Tee - Equal - 12S601EQCP Conex all Ends 15 15
Matt Chrome Plated 22 22- 28- 35
601CP Tee - Reduced - 15 x 15 x 22S601CP Conex all Ends 22 x 15 x 15 22 x 15 x 15
Matt Chrome Plated - 22 x 15 x 2222 x 22 x 15 22 x 22 x 1528 x 15 x 28 -
- 28 x 22 x 28- 28 x 28 x 15- 28 x 28 x 22- 35 x 35 x 15
MATT CHROME PLATED COMPRESSION FITTINGS
617CP Tee with Female Branch 15 x 15 x 1/2 15 x 15 x 1/2
S617CP Conex x Conex x Female - 22 x 22 x 3/4
Thread (Parallel ISO 228)Matt Chrome Plated
684CP Tee with Female End - 15 x 1/2 x 15S684CP Conex x Female Thread
(Parallel ISO 228) x ConexMatt Chrome Plated
63CP Capnut 10 -Matt Chrome Plated 15 -
22 -28 -35 -
S68CP Internal Reducer - 22 x 15Three Piece - 28 x 15Matt Chrome Plated - 28 x 22
- 35 x 15- 35 x 22- 35 x 28
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 22
S301 Straight Coupler - 20Poly x Poly - 25
- 32
S301 Straight Coupler - 20 x 1/2
New Poly x Old Poly - 25 x 3/4
S301 Straight Coupler - 20 x 15Poly x Conex - 25 x 22
S302 Male Straight Connector - 20 x 1/2
Poly x Male Thread - 25 x 1/2
(Parallel ISO 228) - 25 x 3/4
S303 Female Straight Connector - 20 x 1/2
Poly x Female Thread) - 25 x 3/4
(Parallel ISO 228) - 32 x 1
S323 Stop End - 20Poly - 25
S401 Elbow - 20Poly x Poly - 25
- 32
S402 Male Elbow - 20 x 1/2
Poly x Male Thread(Parallel ISO 228)
S403 Female Elbow - 20 x 1/2
Poly x Female Thread - 25 x 3/4
(Parallel ISO 228)
S403W Female Wall Plate Elbow - 20 x 1/2
(3 Hole)Poly x Female Thread (Parallel ISO 228)
S601EQ Tee - Equal - 20Poly all Ends - 25
- 32
S617 Tee with Female Branch - 20 x 20 x 1/2
Poly x Poly x Female Thread - 25 x 25 x 3/4
(Parallel ISO 228)
S1201 Lever Ball Valve with Standard - 20 x 20Red Lever - 25 x 25Poly x Poly
S1201 Lever Ball Valve with Standard - 25 x 15Red Lever - 25 x 22Poly (Inlet) x Conex
ISOCONEX For use with MDPE, PB and PE-X Pipe
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 23
ISOCONEX ACCESSORIES
PY MDPE Liner - 20- 25- 32
SC1 Soft Copper Liner - 8- 10- 15- 18- 22
PP PB & PE-X Liner - 10- 15- 22- 28
WP2/6 PE-X Insert - 20- 25- 32
WP2/10 PE-X Insert - 15- 20- 25- 32
65 Polyring - 202532
S68 Internal Reducer - 25 x 20Three Piece - 32 x 20
- 32 x 25
SP68 Adaptor - 20 x 15Poly x Male Copper - 25 x 15
- 25 x 22- 32 x 28
50 Adaptor Sleeve - 1/2
Copper Poly - 3/4
51 Ring - 1/2
Copper Poly - 3/4
BL Class ‘C’ Insert BS1972/67 - 1/2
- 3/4
ACCESSORIES For use with Imperial Polythene Pipeto BS1972 and BS3284
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeBrass DZR
®
page 24
P211 Deep Seal P 1 x 28 1 x 28P211PCP Swivel Female 11/4 x 35 11/4 x 35
Thread x Conex 11/2 x 42 11/2 x 422 x 54 2 x 54
S211 Deep Seal S 1 x 28 1 x 28S211PCP Swivel Female 11/4 x 35 11/4 x 35
Thread x Conex 11/2 x 42 11/2 x 422 x 54 2 x 54
P212 Inlet P - 255mm 1 x 28 1 x 28P212PCP (10" Long) 11/4 x 35 11/4 x 35
Swivel Female 11/2 x 42 11/2 x 42Thread x Conex 2 x 54 2 x 54
P217 Bath P Low Height - 11/4 x 35 11/4 x 35P217PCP 56mm (21/4") Seal 11/2 x 42 11/2 x 42
Swivel Female Thread x Conex
P218 Vented P 11/4 x 35 11/4 x 35P218PCP Swivel Female Thread x 11/4 x 35 11/4 x 35
Conex x Male Thread 11/2 x 42 11/2 x 42(Parallel ISO 228)
S218 Vented S 11/4 x 35 11/4 x 35S218PCP Swivel Female Thread x 11/4 x 35 11/4 x 35
Conex x Conex 11/2 x 42 11/2 x 422 x 54 2 x 54
P219 Deep Seal P with 11/4 x 35 11/4 x 35P219PCP Adjustable Inlet 11/2 x 42 11/2 x 42
Swivel Female Thread x Conex
P220 Resealing P Antivac Type 11/4 x 35 11/4 x 35P220PCP Swivel Female 11/2 x 42 11/2 x 42
Thread x Conex 2 x 54 2 x 54
S220 Resealing S Antivac Type 11/4 x 35 11/4 x 35S220PCP Swivel Female 11/2 x 42 11/2 x 42
Thread x Conex 2 x 54 2 x 54
P222 Bath P - M/1 11/2 x 421" Overflow ConnectionSwivel Female Thread x Conex
P224 Bath P Set - 25mm (1") 11/4 x 35OverflowSwivel Female Thread x Conex x Overflow
P225 Resealing Bath P Set - 11/4 x 3525mm (1") OverflowSwivel Female Thread x Conex x Overflow
COPPER TUBULAR TRAPS
Part No. Description Size SizeNatural Polished Finish Chrome Plated
Part No. Description Size SizeNatural Polished Finish Chrome Plated
®
page 25
COPPER TUBULAR TRAPS
P314 Running P 28 28P314PCP Conex x Conex 35 35
42 4254 54
S314 Running S 28 28S314PCP Conex x Conex 35 35
42 4254 54
Cleaning Eye 3/8
Extra Charge Cleaning eyeplug and washer2 side cleaning eyes, plugs &
washers
160C Fixed Inlet - Fabricated 3/4 x 22 3/4 x 22160CPCP Swivel Female 1 x 28 1 x 28
Thread x Conex 11/4 x 35 11/4 x 3511/2 x 42 11/2 x 42
160M Fixed Inlet - Fabricated 3/4 3/4
160MPCP Swivel Female Thread x 1 1Male Thread (Parallel) 11/4 11/4
11/2 11/2
160RC Resealing with Fixed Inlet 11/4 x 35 11/4 x 35160RCPCP (5" Seal) Fabricated 11/2 x 42 11/2 x 42
Swivel Female Thread x Conex
160RM Resealing with Fixed Inlet 11/4 11/4
160RMPCP (5" Seal) Fabricated 11/4 11/4
Swivel Female Thread x Male Thread (Parallel)
16030 Chrome Plated Brass with 11/4 x 35Adjustable Inlet 11/2 x 42Swivel Female Thread x Conex
BOTTLE TRAPS
Part No. Description Size SizeNatural Polished Finish Chrome Plated
Part No. Description Size SizeNatural Polished Finish Chrome Plated
®
page 26
W301 Straight Coupler 35 35W301PCP Conex x Conex 42 42
54 54
W302 Male Straight Connector 35 x 11/4 35 x 11/4
W302PCP Conex x Male Thread 42 x 11/2 42 x 11/2
(Parallel ISO 228) 54 x 2 54 x 2
W303 Female Straight Connector 35 x 11/4 35 x 11/4
W303PCP Conex x Female Thread 42 x 11/2 42 x 11/2
(Parallel) 54 x 2 54 x 2
W401F Elbow - Fabricated 35 35W401FPCP Conex x Conex 42 42
54 54
W401FT Elbow with Cleaning Eye - 35 35W401FTPCP Fabricated 42 42
Conex x Conex 54 54
W401/0F Obtuse Elbow - Fabricated 35 35W401/0FPCP Conex x Conex 42 42
54 54
W403SF Swivel Elbow - Fabricated 35 x 11/4 35 x 11/4
W403SFPCP Conex x Swivel 42 x 11/2 42 x 11/2
Female Thread 54 x 2 54 x 2
W601S Sweep Tee 35 35W601SPCP Conex all Ends 42 x 42 x 35 42 x 42 x 35
42 4254 x 54 x 35 54 x 54 x 3554 x 54 x 42 54 x 54 x 42
54 54
DP200 Down Pipe Extended - 11/2 x 42 11/2 x 42D200PCP 200mm (8") Long 2 x 54 2 x 54
FabricatedSwivel Female Thread x Plain Tail
W333 Inlet Extension 2 2W333PCP Tail Pipe -
127mm (5") Long FabricatedMale Thread (Parallel) x Swivel Female Thread
W412 Extended Bath Overflow - 35 x 11/4 35 x 11/4
W412PCP 406mm (16") Long FabricatedPlain Tail x Overflow
W432 Bent Tail Pipe Extended - 11/4 x 35 11/4 x 35W432PCP 406mm (16") Long 11/2 x 42 11/2 x 42
FabricatedSwivel Female Thread x Plain Tail
W610 Extended Tee - 35 35W610PCP 914mm (36") Long 42 42
Fabricated 54 x 54 x 35 54 x 54 x 35Conex x Plain Tail 54 x 54 x 42 54 x 54 x 42x Conex
TRAPS - WASTE FITTINGS
Part No. Description Size SizeNatural Polished Finish Chrome Plated
Part No. Description Size SizeNatural Polished Finish Chrome Plated
®
page 27
TRAPS - ACCESSORIES TRAPS - MANIFOLDS
W63 Capnut 35 35W63PCP 42 42
54 54
W63B Blank Capnut 1 1W63BPCP 35 35
42 4254 54
W65 Brass Compression Ring 35 -42 -54 -
W65P Plastic Compression Ring 11/4 -11/2 -2 -
35 -42 -54 -
W68 Internal Reducer 35 x 28 35 x 28W68PCP Three Piece 42 x 28 42 x 28
42 x 35 42 x 3554 x 28 54 x 2854 x 35 54 x 3554 x 42 54 x 42
99 Rubber Washer 35 -Use with W63B 42 -
54 -
18016 Inlet Joint Washer 11/4 -Use with Swivel Female 11/2 -Thread Connections 2 -
190 Gunmetal Bath Overflow Manifold 11/4
Compression Outlet, with Chrome Plated Nozzle and Face Plate
190PC Gunmetal Overflow Manifold 11/4
As 190 with Plug and Chain
191 Plastic Overflow Manifold 11/4
ABS Body, MI Outlet, Chrome Plated Plastic Face Plate and Nozzle
191PC Plastic Overflow Manifold 11/4
As 191 with Plug and Chain
191CL Plastic Overflow Manifold 11/4 x 1As 191 with Cap and Lining
Nut and Lining195 Plastic Cap and Lining 11/4 x 1
(Use with 191PC, 190, 11/4 x 11/4
190PC and 191)
Part No. Description Size SizeNatural Polished Finish Chrome Plated
Part No. Description Size
®
page 28
STOP VALVES / CHECK VALVES FULLWAY GATE VALVES TO BS5154/B
701 Stop Valve - Crutch Head 15 15S701 Conex x Conex 22 22
28 2835 -42 -54 -
701CP Chrome Plated Stop Valve - 15 -Crutch Head 22 -Conex x Conex
T480Y Single Check Valve - 3/8
Female Thread x Female - 1/2
Thread - 3/4
- 1- 11/4
- 11/2
- 2
S742 DZR Draining Tap to - 1/2
BS2879-2 1980 (Bushed)Male Thread (Parallel ISO 228)
S746 DZR Draining Tap (Bushed) - 15Conex x Conex
1350 Draining Tap Key 3/4 -
42500KY Lockshield Key for 15 -Gate Valves 22 -
1001 Brass Gate Valve (PN16) 15 151001LK Conex x Conex 22 22
28 2835 3542 4254 54
1001CP Chrome Plated Brass Gate 15 -Valve (PN16) 22 -Conex x Conex
1101/100 DZR Gate Valve 67.7 -Conex x Conex 76.1 -
720NP Straight Servicing Valve 15 x 10Conex x Conex 15 x 15
22 x 22
721NP Servicing Valve Elbow 15 x 1/2
Conex x Swivel Female Thread(Parallel ISO 228)
722NP Straight Servicing Valve 15 x 1/2
Conex x Swivel Female Thread 22 x 3/4
DRAINING TAPS SERVICEMAN VALVES TO BS6675
Part No. Description Size SizeBrass DZR
Part No. Description Size SizeWheelhead Lockshield
Part No. Description Size SizeBrass DZR
Part No. Description SizeBrass Nickel Plated
®
page 29
PLUG TAPS / AUTOMATIC AIR VENT / WASHING MACHINE VALVE
1501 Plug Tap 15Conex x Conex 22
3620 Automatic Air Vent 3/8
3625 Air Vent Isolator 3/8
BRASS FLOAT VALVES
LEVER BALL VALVES
Brass Float Valve BS 1212: Part 1Side Entry
50033 1/2
50033L High Pressure Plastic Seat 3/4
50033J 1
50063 Low Pressure Plastic Seat 1/2
50133S High Pressure Metal Seat 11/4
11/2
2
Brass Float Valve BS 1212: Part 2Side Entry
52033 High Pressure 1/2
52063 Low Pressure 1/2
563 Plastic Float Valve BS 1212: Part 3Side Entry - Supplied with 2 seatsH.P (Fitted) and M.L.P
All Plastic High Pressure 1/2
1201 Lever Ball Valve with 15 15S1201 Standard Red Lever 22 22
Conex x Conex 28 28
S1201 ISO Lever Ball Valve with - 20 x 20Standard Red Lever - 25 x 25Poly x Poly
S1201 ISO Lever Ball Valve with - 25 x 15Standard Red Lever - 25 x 22Poly (Inlet) x Conex
1211 Lever Ball Valve with Red 15 -‘T’ Handle 22 -Conex x Conex 28 -
1204 Lever Ball Valve with 1/2 -Standard Red Lever 3/4 -Female Thread 1 -(Parallel ISO 228) x 11/4 -Female Thread 11/2 -(Parallel ISO 228) 2 -
1204G Lever Ball Valve with 1/4 -Standard Yellow Lever 3/8 -Female Thread (Parallel ISO 228) x 1/2 -Female Thread (Parallel ISO 228) 3/4 -
1204W Light Pattern Nickel - 1/2
Plated Lever Ball Valve - 3/4
with Standard Red Lever - 1Female Thread - 11/4
(Parallel ISO 228) x - 11/2
Female Thread - 2(Parallel ISO 228)
Part No. Description SizeBrass Nickel
Plated
Part No. Description Size SizeBrass Brass Nickel
Natural Finish Plated
Part No. Description SizeBrass
Part No. Description Size SizeBrass Natural DZR
Finish Natural Finish
®
page 30
Notes
IBP GmbHErdkauter Weg 17 D-35394 Giessen GERMANYTel: +49 641 70070 Fax: +49 641 7007361
IBP Atcosa S.L.Poligono Industrial Quintos-Aeropuerto Apartado Correos 16 14005 Cordoba SPAINTel: +34 957 469600 Fax: +34 957 469604
IBP FranceImmeuble P H Spaak 12 rue Jules Ferry 93561 Rosny-sous-Bois Cedex FRANCETel: +33 1 481 22550 Fax: +33 1 481 22560
IBP Bänninger Italia SrlStrada Provinciale Asolana No. 9243056 San Polo di Torrile (Parma) ITALYTel: +39 0521 317311 Fax: +39 0521 317355
IBP LimitedWhitehall Road Tipton West Midlands DY4 7JUUNITED KINGDOMTel: +44 (0)121 557 2831 Fax: +44 (0)121 520 8778email: [email protected]@ibpgroup.comweb: www.ibpgroup.com
IBP Instalfittings SP z o.oul Obodrzycka 61 61-249 Poznan POLANDTel: +48 61 8 770051 Fax: +48 61 8 790949
RMA T 05/04 CONEX