CONCRETE CURING COVER

IT’S DIFFERENT

EASY TO USE LAYS FLAT10’ X 250’ ROLLS

®

The only curing cover designed with safety in mind.

From the makers of engineered fabrics that protect and prolong equipment life-cycles, Transhield introduces TopCure®, a patented 7-day wet cure cover with an anti-slip, grit surface to prevent slips and falls. TopCure

keeps moisture controlled for a steady and strong cure, it’s easy to roll out, lays flat, cuts easily, and does not need re-wetting. The extreme durability of the material makes it simple to fold up and discard when done.

And because it does not contain any super absorbent polymers (SAP), it leaves behind a clean surface.

Curing concrete with TopCure prevents moisture loss, protects the surface from external elements, and helps create a stronger surface.

ANTI-SLIP SURFACE

Exterior has a grit surface to prevent slips and falls.

HYDRATION PODS

The unique pattern of the nonwoven allows faster

water absorption.

DURABLE

Transhield’s proprietary method for manufacturing makes TopCure the most

durable cover on the market.

U.S. PATENT 10,675,779

PHYSICAL PROPERTY DATAScope per ASTM C171-16: Sheet material for covering the surface of hydraulic cement concrete to inhibit moisture loss during the curing period and to reduce temperature rise in concrete exposed to radiation from the sun. Considered: white-burlap-polyethylene sheet

PROPERTIES UNIT OF MEASURE RESULT TEST METHOD

Thickness mils 22 ASTM D1777Width inches 120

Basis Weight lbs/sqy 0.24 ASTM D1505 gsm 131.00

Puncture lbs 15 ASTM 4833

Elmendorf Tear

grams 1,178 MD

ASTM 1922 lbs 2.60 MD

grams 4,460 CD lbs 9.83 CD

Tensile Strength psi 775 MD

ASTM D882

444 CD Yield Strength psi 775 MD

344 CD Break Elongation % 500 MD

500 CD Break Load lbs 17 MD

10 CD

WVTR gr/sqm/day, 37.8C (100.04F)@100%RH <4.0 ASTM F1249

Daylight Reflectance opacity 85% ASTM E1347

Weight/Roll lbs 74 NA

Ft2/Roll 2,500 NA

Rolls/Pallet 25 NA

About Transhield®

Transhield engineers and manufactures specialty fabrics used to make protective covers for use in the industrial, marine, wind energy, aviation, and defense markets. TopCure® is a specialty fabric made specifically for the concrete construction industry.

MADE IN THE USA

*These numbers represent typical values obtained by our laboratories and should be considered accordingly. These numbers are subject to change without notice. TopCure meets the requirements of ASTM C171.

888.731.7700

TRANSHIELD-USA.COM

TOPCURE® ®

Copyright © 2018 Transhield. All rights reserved.

TopCure and Transhield are registered trademarks of Transhield, Inc. Rev 061620

Manufactured by: