complete lift design solutions · pdf filecomplete with en81-70 compliant buttons &...

OPTIMA–E

Global Lift Equipment Ltd H42/H43 Ashmount Enterprise Park, Flint, Flintshire, CH6 5YL.

Tel: 01352 735400 Fax: 01352 735733 Email: [email protected] www.global-lift.com

Complete Lift Design Solutions 2012

From Global Lift Equipment Ltd

OPTIMA–E

Global Lift Equipment are a well established supplier within the UK Lift Industry Specialising in design and supply of complete lifts and lift components Our in house UK Design Team work alongside Lift Companies/Architects/Specifiers and End Clients from conception to completion of a project to ensure that the ultimate customer receives the lift to their bespoke requirements. Working closely with our Notified Body (Bureau Veritas) gives us flexibility to accommodate difficult existing parameters which require specialist design. In addition to Machine Roomless Lifts, our wide range includes: Traction/Hydraulic with Machine Room Vehicle Lifts Scenic Lifts Lorry Lifts Bespoke Lifts To compliment our complete lifts we can offer internal or external Structures, both semi supported and free standing, along with various standard cladding options and finishes.

Page 1

THE GLOBAL RANGE OF LIFTS

OPTIMA–E INTRODUCTION

Page 2

The OPTIMA - E is the ultimate lift system for traction lifts as it removes the need for a motor room above or adjacent to the lift shaft. We have developed and improved the OPTIMA product significantly over many years and now have a solution which is a market leader in the UK, the new OPTIMA – E. The machine system is Gearless which makes the running costs very attrac-tive, gives a very good ride quality and makes recovery under power failure and emergency conditions very easy and cost effective. Gearless Systems remove the need for complex remote handwinding systems or large banks of back-up batteries for power supply - a simple emergency recovering system controlling the brake on the machine is all that is needed. We only use high quality equipment for the OPTIMA - E: Machine: The Machine is manufactured by CEG as standard with option for a ZA Machine at extra cost if required. Controller: The Controller is a Lester Controls Panel manufactured in the UK with a Control Techniques Drive or at extra cost a Ziehl Abegg Drive. Doors: The Door Systems are Fermator with options for Anti-Vandal Doors or the new Heavy Duty Fermator Door System designed for the Local Authority Market - ‘The Robusta’. Rucksack Arrangement The Machine is located in the head of the lift shaft and mounted over guides. The standard design is a Rucksack Arrangement therefore loads are only applied to one wall and also allowing 3 sides lifts to be provided. Inverted Rucksack Arrangement Maximise small shaft space by having the car & counterweight guides in line providing a solution to install a Traction MRL in place of a Hydraulic Lift. Conventional Arrangement For larger loads or at your request, a Conventional Type Arrangement can be supplied with Lift Car Guides on the horizontal axis.

The Controller is located as standard at the top floor in a cabinet size 450mm Wide x 250mm Deep x 2100mm High. The Drive is located within the cabinet unless high capacity requiring large Drive sizes then the Drive has to be located in larger cabinet on the landing or within the lift shaft. Alternatively the Controller can be located at any other location within the build-ing, up to a maximum of 20m away from the machine on request at additional cost.

OPTIMA–E INTRODUCTION

Page 3

We have an extensive range of finishes available however should these finishes not suit your customers requirements we can provide at extra costs finishes tailored to suit your own customer needs. The OPTIMA-E is the complete answer to the increasing demand for compact space saving and environ-mentally conscious lifts. Standard pit 1150mm Standard headroom 3550mm Special headrooms of 3000mm and pits down to 1000mm with conventional guided arrangements, can be accommodated with additional safety features approved and certified with our notified body Bureau Veritas at extra cost. Installation is quick and easy equipment has been designed in close association with lift installers to reduce on site installation times.

OPTIMA–E GENERAL OVERVIEW

Capacity: MRL Rucksack Arrangement - upto 1000kg MRL Conventional Arrangement - upto 4000kg MRL Inverted Guide Arrangement - upto 630kg Speed: 1.0 m/s ACVVF - Options for 1.6m/s & 2m/s Drive Unit: Compact Gearless & Purpose Designed Machine located above. Power Supply: 415v, 3 phase, 50hz Control System: Down Collective Microprocessor by Lester Controls Ltd Parameter Control and Fault Finding/Diagnostic Facility Programming and Real-Time Fault Logging Anti-nuisance Feature Car Preference Control Overload Indication Car and Landing Push Buttons and Hall Lanterns Power and Car Light Main Switch included Control Cabinet Located on Landing Autodialler with Intercom Option Illuminated Cabinet Fire Recall to Main Floor Entrances: VVVF Car Door Operator Complete with Set of Door Panels Complete Landing Entrances - Models 40/10 & 50/11 2 Hour UK Fire Rated Landings Aluminium Tracks Full Height Door Detector Car Frame: Fabricated Steel Structure with Fixed Sliding Guide Shoes and Lubricators Complete with Shaft Top Beams and Divertor Pulleys Counterweight Frame and Fillers Bi-directional Safety Device in Compliance with 95/16/EC Car Top Railing in Compliance with 95/16/EC Pit Screen (On Conventional Arrangement, support steels maybe required in headroom by others) Fixtures: Full Height COP complete with: Global standard Autodialler Unit Speech Unit Emergency Light Overload Display Gilda Landing Stations Complete with EN81-70 Compliant Buttons & Indicators - see options.

Page 4

OPTIMA–E MRL DATA TABLE - RUCKSACK ARRANGEMENT

Page 5

Pay Load Car Size Car

Entrances Door Clear Opening

Minimum Plumb Shaft (2PSO Door)

Minimum Plumb Shaft (2PCO Door) Susp

450 Kg 950X1300 1 800 1520x1670 1800x1610 1:1 450 Kg 950X1300 2(180º) 800 1520x1820 1800x1700 1:1 450 Kg 1000X1250 1 800 1570x1620 1820x1560 1:1 450 Kg 1000X1250 2(90º) 800 1720x1620 NO 1:1 450 Kg 1000X1250 2(180º) 800 1570x1770 1820x1650 1:1 450 Kg 1000X1250 1 900 1570x1620 1920x1560 1:1 450 Kg 1000X1250 2(180º) 900 1570x1770 1920x1650 1:1 630 Kg 1100X1400 1 800 1670x1770 1870x1710 2:1 630 Kg 1100X1400 2(90º) 800 1820x1770 NO 2:1 630 Kg 1100X1400 2(180º) 800 1670x1920 1870x1800 2:1 630 Kg 1100X1400 3 800 1820x1920 NO 2:1 630 Kg 1100X1400 1 900 1670x1770 1970x1710 2:1 630 Kg 1100X1400 2(90º) 900 1820x1770 NO 2:1 630 Kg 1100X1400 2(180º) 900 1670x1920 1970x1800 2:1 630 Kg 1100X1400 3 900 1820x1920 NO 2:1 800 Kg 1350X1400 1 800 1920x1770 2000x1710 2:1 800 Kg 1350X1400 2(90º) 800 2070x1770 NO 2:1 800 Kg 1350X1400 2(180º) 800 1920x1920 2000x1800 2:1 800 Kg 1350X1400 3 800 2070x1920 NO 2:1 800 Kg 1350X1400 1 900 1920x1770 2250x1710 2:1 800 Kg 1350X1400 2(90º) 900 2070x1770 NO 2:1 800 Kg 1350X1400 2(180º) 900 1920x1920 2250x1800 2:1 800 Kg 1350X1400 3 900 2070x1920 NO 2:1

1000 Kg 1100X2100 1 900 1730x2470 2030x2410 2:1 1000 Kg 1100X2100 2(90º) 900 1880x2470 NO 2:1 1000 Kg 1100X2100 2(180º) 900 1730x2620 2030x2500 2:1 1000 Kg 1100X2100 3 900 1880x2620 NO 2:1 1000 Kg 1400X1600 1 1000 2030x1970 2280x1910 2:1 1000 Kg 1400X1600 2(90º) 1000 2180x1970 NO 2:1 1000 Kg 1400X1600 2(180º) 1000 2030x2120 2280x2000 2:1 1000 Kg 1400X1600 3 1000 2180x2120 NO 2:1

Information Not for Construction Purposes without prior approval on project basis.

Speed

1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s 1 m/s

Capacity

MINIMUM PIT

Fully EN81.1 A3 Compliant

MINIMUM HEADROOM


MINIMUM PIT

With Design Certification & Approval from our Notified Body

MINIMUM HEADROOM


450KG 1060 mm 3405 mm 1060 mm 2900 mm

630KG 1110 mm 3405 mm 1110 mm 2900 mm

800KG 1110 mm 3405 mm 1110 mm 2900 mm

1000KG 1160 mm 3405 mm 1160 mm 2900 mm

OPTIMA–E MRL DATA TABLE - CONVENTIONAL ARRANGEMENT

Page 6

Capacity

MINIMUM PIT


MINIMUM HEADROOM


MINIMUM PIT


MINIMUM HEADROOM


450KG 940 mm 3405 mm 940 mm 2920 mm

630KG 940 mm 3405 mm 940 mm 2920 mm

800KG 940 mm 3405 mm 940 mm 2920 mm

1000KG 940 mm 3405 mm 940 mm 2920 mm

Pay Load Car Size Car EntranceS

Door Clear Opening


Minimum Plumb Shaft (2PCO Door) Speed Susp

450 Kg 950X1300 1 800 1650 x 1700 1850 x 1650 1 m/s 2:1 450 Kg 950X1300 2(180º) 800 1650 x1850 1850 x 1700 1 m/s 2:1 450 Kg 1000X1250 1 800 1700 x 1650 1900 x 1600 1 m/s 2:1 450 Kg 1000X1250 2(180º) 800 1700 x 1800 1900 x 1650 1 m/s 2:1 450 Kg 1000X1250 1 900 1700 x 1650 1900 x 1600 1 m/s 2:1 450 Kg 1000X1250 2(180º) 900 1700 x 1800 1900 x 1650 1 m/s 2:1 630 Kg 1100X1400 1 800 1800 x 1650 1950 x 1750 1 m/s 2:1 630 Kg 1100X1400 2(180º) 800 1800 x 1800 1850 x 1800 1 m/s 2:1 630 Kg 1100X1400 1 900 1800 x 1650 1950 x 1750 1 m/s 2:1 630 Kg 1100X1400 2(180º) 900 1800 x 1800 1850 x 1800 1 m/s 2:1 800 Kg 1350X1400 1 800 2050 x 1800 2050 x 1750 1 m/s 2:1 800 Kg 1350X1400 2(180º) 800 2050 x 1950 2050 x 1800 1 m/s 2:1 800 Kg 1350X1400 1 900 2050 x 1800 2150 x 1750 1 m/s 2:1 800 Kg 1350X1400 2(180º) 900 2050 x 1950 2150 x 1850 1 m/s 2:1 1000 Kg 1100 x 2100 1 900 1800 x 2150 2000 x 2500 1 m/s 2:1 1000 Kg 1100 x 2100 2(180º) 900 1800 x 2400 2000 x 2400 1 m/s 2:1 1000 Kg 1100 x 2100 1 1000 1800 x 2150 2200 x 2500 1 m/s 2:1 1000 Kg 1100 x 2100 2(180º) 1000 1800 x 2400 2200 x 2450 1 m/s 2:1 1000 Kg 1400 x 1600 1 900 2100 x 2150 2400 x 2000 1 m/s 2:1 1000 Kg 1400 x 1600 2(180º) 900 2100 x 2400 2400 x 1950 1 m/s 2:1 1000 Kg 1400 x 1600 1 1000 2100 x 2150 2500 x 2000 1 m/s 2:1 1000 Kg 1400 x 1600 2(180º) 1000 2100 x 2400 2500 x 1950 1 m/s 2:1


OPTIMA–E MRL DATA TABLE - INVERTED RUCKSACK ARRANGEMENT

Page 7

Capacity

MINIMUM PIT


MINIMUM HEADROOM


MINIMUM PIT


MINIMUM HEADROOM


320KG 1200 mm 3660 mm 940 mm 3660 mm

375KG 1200 mm 3660 mm 940 mm 3660 mm

450KG 1200 mm 3660 mm 1010 mm 3660 mm

630KG 1200 mm 3660 mm 1060 mm 3660 mm


Pay Load Car Size Car Entrances Door Clear Opening


Minimum Plumb Shaft (3PSO Door) Speed Susp

320 Kg 800x1000 1 700 N/A 1200x1300 1 m/s 1:1 320 Kg 800x1000 2(90º) 700 N/A 1300x1350 1 m/s 1:1 320 Kg 800x1000 2(180º) 700 N/A 1200x1450 1 m/s 1:1 320 Kg 800x1000 3 700 N/A 1300x1450 1 m/s 1:1 375 Kg 900x1100 1 700 1300x1400 N/A 1 m/s 1:1 375 Kg 900x1100 2(90º) 700 1360x1450 N/A 1 m/s 1:1 375 Kg 900x1100 2(180º) 700 1300x1460 N/A 1 m/s 1:1 375 Kg 900x1100 3 700 1400x1500 N/A 1 m/s 1:1 450 Kg 1000x1200 1 800 N/A 1400x1500 1 m/s 1:1 450 Kg 1000x1200 2(90º) 800 N/A 1500x1550 1 m/s 1:1 450 Kg 1000x1200 2(180º) 800 N/A 1400x1650 1 m/s 1:1 450 Kg 1000x1200 3 800 N/A 1500x1600 1 m/s 2:1 630 Kg 1100x1400 1 800 1500x1700 N/A 1 m/s 2:1 630 Kg 1100x1400 2(90º) 800 1560x1700 N/A 1 m/s 2:1 630 Kg 1100x1400 2(180º) 800 1500x1760 N/A 1 m/s 2:1 630 Kg 1100x1400 3 800 1600x1800 N/A 1 m/s 2:1

OPTIMA–E

Page 8

RUCKSACK ARRANGEMENT

OPTIMA–E

Page 9

CONVENTIONAL ARRANGEMENT

OPTIMA–E

Page 10

INVERTED GUIDE ARRANGEMENT

OPTIMA–E

DURABLITY & ECONOMY … Skinplate The VENUS range of materials are aimed at durability and economy yet offer a variety of designs and finishes. LIFT CAR WALLS Modular Skinplate from range FRONT RETURNS Modular Skinplate from range DOOR PANELS Primed Epoxy Doors (Option: linished stainless steel) SKIRTING Modular Skinplate from range CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Stainless Steel Tubular Handrail located on rear wall VENTILATION Natural The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option.

VENUS LIFT CAR

Page 11

OPTIMA–E

ELEGANCE & STYLE … Laminate The JUPITER design offers an attractive, flexible theme by way of a large selection of fin-ishes and options LIFT CAR WALLS Laminate (on Wood) from range FRONT RETURNS Laminate (on Wood) from range (Option: Linished Stainless Steel) DOOR PANELS Linished Stainless Steel SKIRTING Linished Stainless Steel CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option.

JUPITER LIFT CAR

Page 12

OPTIMA–E

PRACTICALITY & SIMPLICITY … Linished Stainless Steel LIFT CAR WALLS Self Supporting Linished Stainless Steel FRONT RETURNS Linished Stainless Steel DOOR PANELS Linished Stainless Steel SKIRTING Linished Stainless Steel CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Stainless Steel Tubular Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option.

MARS LIFT CAR

Page 13

OPTIMA–E

ROBUSTNESS & VARIETY OF DESIGN … Patterned Stainless Steel The STAR design features stainless steel finishes with a choice of different patterns. LIFT CAR WALLS Patterned Stainless Steel FRONT RETURNS Patterned Stainless Steel DOOR PANELS Patterned Stainless Steel SKIRTING Linished Stainless Steel (option for Patterned Stainless Steel) CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option.

STAR LIFT CAR

Page 14

OPTIMA–E OPTIMA E - Options Available

Option for ZA Machine Option for Windcrest Autodialler Option for Dewhurst Pusbuttons Car Ventilation Fan Natural Mirror on Rear/Side Wall Car Body with Side & Rear Wall in Framed Toughened & Laminated Glass Car Floor Recess (Max 20mm) Car and Landing Doors with Increased Height of 2100mm Anti Vandal Door Panels available or Heavy Duty ROBUSTA doors designed for Local Authorities Landing Door Panels and Frames in Linished, Mirror Polish or Patterned Stainless Steel Framed Glass Car and Landing Doors Landing Entrance Infill Panels Landing Entrance Infill Panels in Linished, Mirror Polish or Patterned Stainless Steel Indicator at all other Floors - see range Braille and Tactile Embossing (Ceasar Tags) Duplex Control System Controller Cabinet in Linished Stainless Steel or Patterned Stainless Steel Alternative Location for Controller Available Power Supply with 60hz Rescue Device DDA and Part M Compliance Pack Tip Up Seat Option - 2 models available Continuous Handrails

Page 15

OPTIMA–E OPTIMA E - Options Available

Options for BREAAM Credit Two Requirements: (any three) Lift to operate in a standby mode during off peak and idle periods VVVF drive is supplied as standard Lift will be supplied with Regenerative Drive, so the energy generated by the lift is returned back to

the grid or used elsewhere The Lift Car will be supplied with energy efficient lighting Fire Fighting Control or Evacuation Control to EN81-72 Includes: IPX rated switches on all doors and stop switches Models Panzer or Sherman pushbuttons IP rated D43 Indicators Ladder outside the car Fireman’s hatch in roof Windcrest autodialler with Evacuation system Flush mounted speaker and back box for Evacuation

Page 16

OPTIMA–E LIFT CAR FINISHES - Skinplate

Subject to change - please enquire for specific lead times.

Page 17

PPS-29 GREEN

PPS-28 RED

F-15 SILVER

OPTIMA–E


Page 18

LIFT CAR FINISHES - Laminate

U522 ST15 Powder Blue

U323 ST15 Chilli Red

U212 ST2 Cream

U514 ST15 Baltic Blue

U611 ST15 Turquoise Green

H3389 ST24 Natural Light Oak

H1951 ST15 Sienna Calvados

H1883 ST15 Light Diamond Maple

OPTIMA–E LIFT CAR FINISHES - Stainless


Page 19

Brushed 441 Stainless Steel Mirror Polish Stainless Steel

Pattern - Linen Pattern - Squares

Pattern - 5WL Pattern - 2WL

OPTIMA–E All handrails are round - 40mm to comply with EN81-70 PM - Chromium Plated (mirror polish) Handrail - extra cost PN - Black Painted Handrail - included PD - Gold Anodised Handrail - extra cost PR - Stainless Steel Handrail - included Continuous Handrails also available at extra cost

Page 20

LIFT CAR FLOORING - Rubber

HANDRAILS

Grey Button Rubber

Black Button Rubber

OPTIMA–E SUSPENDED CEILINGS

Other ceilings at extra cost: TC - Ice laminated Stadip glass 3+3 with a stainless Steel frame TD - White Dulaconcord ceiling with methacrylate on a stainless steel frame TE - Bronze Coloured lamiglas mirror with black-framed halogen lights on a black square frame TG - Black Primed sheet with black framed halogen lights

Page 21

Lift car ceilings and lighting are one of the most important aspects of the car interior deco-ration. They must provide functional light to meet required Lux levels whilst also being aesthetically pleasing. The standard GLE range includes all models shown below - T1,T2,T3,T4,T5 & T8 These Ceilings are available in Black or White.

OPTIMA–E SAMPLE BESPOKE LIFT CARS

Lift Car: Decorative Laminate with golden Stainless steel plates. Round Profiles in stainless steel AISI-304 on rear corners Ceiling: Suspended cork type with gold framed Halogen lights with gold stainless steel Square frame Floor: Castano Verdoso Granite Mirror: Bronze colour half mirror lamiglas with A decorative gold stainless steel Handrail COP: Gold stainless steel Lift Car: Decorative Laminate fixed with Stainless steel profile Ceiling: suspended painted black coat sheets with methacrylate Floor: Black button rubber Mirror: Bronze colour half mirror lamiglas with A decorative stainless steel handrail COP: Stainless steel Column

Page 22

OPTIMA–E SAMPLE BESPOKE LIFT CARS

Lift Car: Decorative Laminate Ceiling: Suspended Ice laminated glass Stadip 3+3 with a stainless steel frame Floor: Red Porrino Granite Mirror: Bronze colour half mirror lamiglas COP: Stainless steel Column Lift Car: Bronze coloured lamiglas mirror between stainless steel AISI-304 modules with vertical round profiles of stainless steel in the rear corners Ceiling: Bronze coloured lamiglas mirror with black frame halogen lights on a black square frame Floor: Negro Sudafrica granite COP: Stainless steel

Page 23

OPTIMA–E PUSHBUTTONS - Standard Range

Stainless steel pressel and stainless steel halo Simultaneous illumination of halo & tactile legend. Pressel backward compatible with original BF range EN81-70 compliant

Stainless steel pressel and stainless steel halo Illumination of halo & tactile legend in Red & Blue Pressel backward compatible with original BF range EN81-70 compliant

Structure polycarbonate

Mounting 3mm projecting through faceplate

Fixing Frontal mounting fixed by screw-cut ring. Fixing thickness 0.8mm-5mm

Pushbutton 1.8mm stroke

Wiring Wires screwed on terminals

Illumination 4 red LED

Life 2500000 operations

TECHNICAL FEATURES

Protection IP51 (dust & vertical water fall)

Contacts 1 or 2 contacts, 2 contact version N/O only 1 contact version N/O & N/C

Structure polycarbonate

Mounting 3mm projecting through faceplate

Fixing Frontal mounting fixed by screw-cut ring. Fixing thickness 0.8mm-5mm

Pushbutton 1.8mm stroke

Wiring Wires screwed on terminals

Illumination Acceptance 4 led / Legend 1 led

Life 2500000 operations

TECHNICAL FEATURES

Protection IP51 (dust & vertical water fall)

Contacts 2 changeover contacts

PB01 - BL SINGLE ILLUMINATION

PB02 - BD DUAL ILLUMINATION

Page 24

NB—for EN81-72 option, Panzer or Sherman pushbuttons will be supplied

OPTIMA–E

Anti Vandal Solid Stainless Steel Pushbutton Suitable for hostile environments Front mounting without studs 3 profiles available - Moon, Disc & Classic 3 colours available - Blue, Amber & Red 2 tags available with/without Braille - Caesar & Brutus EN81-70 DDA Compliant EN81-71 DDA Compliant Suitable for Fire Fighting Lifts Brass PVD Button also available

BRUTUS TAG Tactile or

Braille Tactile

CAESAR TAG Tactile or

Braille Tactile

TECHNICAL FEATURES

Operating Stroke

1.8mm activation

Life 1500000 operations min

Illumination Red/Blue or Amber high density LED 12/24Vac/dc or 120Vac. Also available non illuminated.

Contacts 1 or 2 microswitches, C-NO/NC each. Separate circuits for microswitches & illumination

PB03 - PANZER BUTTONS

PB04 - SHERMAN BUTTONS

Page 25

PUSHBUTTONS - Optional Range

OPTIMA–E INDICATORS - Standard Range

Page 26

Size: 108mm x 75mm

Available with or without Bi-tonal Gong

Available with Red or Blue display

IND 001 - LIP D43 DOT MATRIX

IND 002 - LIP D43 7 SEGMENT

Size: 108mm x 75mm

Available with or without Bi-tonal Gong

Available with Red or Blue display

NB—for EN81-72 IPX rated D43 indicators are supplied as standard

OPTIMA–E

IND 008 - GL/TFT-LITE

Page 27

INDICATORS - Optional Range

Using the latest technology, our TFT LITE series can illustrate vivid images with high color contrast and resolution At only 18.5mm in depth, the compact, ultra slim design makes it easy for installation when space is limited. With the new TFT LITE series, it enhances your building’s image instantly at a reasonable price. Features:

Displays are EN81-70 DDA Compliant. Portrait & Landscape displays Screens display sizes: 4.3”, 5.6” & 7”

TFT Color LCD of color capability up to 262K colors Super bright with high contrast ratio

Wide viewing angle Aesthetic display of basic lift information

Ultra Slim of only 15-20 mm depth Binary - 12-24VDC supply

Car Display Landing Display

Lift is at the Ground Floor waiting for a call

OPTIMA–E

Full Colour LCD Displays for the Lift Car We have shown a typical layout. Background, position of lift data, time, Company details, font, colour etc is all to Client’s choice. Presentation style programming via Windows CE based operating system. Images easily edited by copying to SD Card/USB or connection via LAN. Portrait or Landscape Display Screen Sizes Available: 8”, 10.4”, 12.1” (diagonally across) Display can include: Floor and Travel Directions of the Lift Time Based Information Floor Position Indication Warnings/Optional Information Date/Time Background Choice

GLOBAL LIFT EQUIPMENT LTD

Royal Hotel

HOTEL BLUE

IND 007 - GL/TFT

Page 28

INDICATORS - Optional Range

OPTIMA–E

H23 Gilda Surface Mount Stainless Steel Finish with single DDA compliant push button - see options Stainless Steel Halo With Comfort Tone Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost

LF 001

H23 Gilda Surface Mount Stainless Steel Finish with two DDA compliant push buttons - see options Stainless Steel Halo With Comfort Tone Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost

LF 002

H23 Gilda Surface Mount Stainless Steel Finish With LIP 7 Segment Indicator Or Dot Matrix Indicator With or without Gong Red or Blue illumination See Options Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost

LF 003

Page 29

LANDING PLATES - Standard Range

NB—for EN81-72 option, Panzer or Sherman pushbuttons & IPX rated D43 Indicators will be supplied

complete lift design solutions · pdf filecomplete with en81-70 compliant buttons &...

Documents