complete grit removal package one trusted source€¦ · achieves a fully integrated operating...
TRANSCRIPT
Excellent Engineering Solutions
WEMCO® Hydrogritter® IIComplete Grit Removal Package
The WEMCO® Hydrogritter® II complete grit removal package is an economical option for grit removal in municipal waste water treatment plants sized for
flows of 2 MGD and less. It provides the performance you expect, in a cost-effective package for lower flow treatment plants.
The impressive performance of the Hydrogritter® II grit removal system removes grit larger than 150 mesh (105 micron) with a specific gravity of 2.65 or
greater. It is also capable of removing up to 3/4 tons of grit per hour. The package
includes a pump sized for 250 gpm at 40’ TDH, that operates on 230 or 460 volt power.
Equipped with a NEMA rated control panel, the Hydrogritter® II complete grit removal package
achieves a fully integrated operating system, free from the need for constant supervision.
Complete Grit Removal Package One Trusted Source
Includes:• Hydrogritter® II grit removal system• WSP™ Self Primer grit pump• NEMA rated control panel
Complete Packages Starting under $40,000
Upgrades and supplementary pumps available for additional cost.
For sizing of larger treatment plants, please contact Weir Specialty Pumps
Weir Specialty Pumps
440 West 800 South P.O. Box 209 (84110-0209) Salt Lake City, UT 84101USA
Tel: 801 359 8731 Fax: 801 530 7828email: [email protected]: www.weirsp.com
Excellent Engineering Solutions
Bulletin: Hydrogritter II Package
WSP™ 3" Self Primer pump:• Ductile iron case• High chrome impeller and seal plate with hard iron wear plate• 7.5 HP TEFC severe duty motor• Belt driven base plate with constant speed belts and sheaves• Silicon carbide seal faces
Available Upgrades:• Hazardous location motor• Additional pumps• Wemco® Torque-Flow® Model CE submersible pump*
WEMCO® Hydrogritter® II grit removal system: • Grit end mounted cyclone• CAVEX® cyclone made with a dough molded compound casing and
natural gum rubber liners• 3/4 HP direct connected drive motor with cycloidal speed reducer• Emergency stop cable running around outside of tank• ¼” thick steel tank and supports• NEMA 4X brass solenoid valve• Kydex® tank covers
Available Upgrades:• Classifier overflow end mounted cyclone• Hazardous location motor and solenoid valve• Stainless steel tank and solenoid valve
Control panel: • Stainless steel NEMA 4X enclosure• NEMA rated starters and circuit breakers• HOA switches for 1 pump and 1 Hydrogritter® II grit removal system• Alarm horn and beacon• Output contacts for remote alarm indication
Available Upgrades:• Alternating controls for additional pumps
*Wemco® Torque-Flow® Model CE submersible pump: • High chrome iron wetted parts• 9.2 HP EEXO6 Hidrostal® immersible motor capable of running
continuously in air or submerged• Flanged discharge port for connection to discharge hose• 50’ of motor power and control cable• Tungsten carbide/silicon carbide outer mechanical seal
Available Upgrades:• Additional pumps
Copyright © 2014, Envirotech Pump Systems, Inc.. All rights reserved. WEIR and the WEIR logo are trademarks and/or registered trademarks of Weir Engineering Services Ltd.; WEMCO is a trademark of FLSmidth A/S used under license by companies forming part of The Weir Group PLC.; TORQUE-FLOW, HYDROGRITTER and WSP are trademarks and/or registered trademarks of Envirotech Pump Systems, Inc.; HIDROSTAL and the HIDROSTAL logo are trademarks of Martin Stahle used under license by companies forming part of The Weir Group PLC.; CAVEX is a trademark and/or registered trademark of Weir Minerals Australia Ltd; KYDEX is a registered trademark of KYDEX, LLC.