complete catalogue 2019atrium kiub page 42 atrium ronq page 44 pi-led line page 46 k-consultatio...
TRANSCRIPT
HUMAN CENTRIC LIGHTING
COMPLETE CATALOGUE 2019
LED LIGHT SOLUTIONS FORHUMAN CENTRIC LIGHTING
2
3
Product List
Luminaires – Human Centric Lighting Page 8 ff
Light Management – Human Centric Lighting Page 58 ff
Control and Operation – Fixed White Page 68 ff
Luminaires – Fixed White Page 48 ff
K-SPOT 12 F/S Page 10
K-SPOT CALIDUSPage 50
SOVT CAMPUS Page 14
K-SPOT FLAT Page 12
K-MOENIA Page 52
K-SOLIS Page 16
K-VIRTUS II Page 28
K-VIVERE Page 54
K-SOLIS PUREPage 16
K-VIVEREPage 54
K-AERA Page 20
VIBE Page 24
K-AERA FLAT Page 22
LIQUID Page 26
K-CATASTAPage 34
K-SPOT 30 Page 38
K-CONSULTATIO Page 18
K-MOTUS Page 56
K-FORUM Page 30
K-MERCATURA Page 32
K-MOTUS Page 40
ATRIUM KIUB Page 42
ATRIUM RONQ Page 44
PI-LED LINE Page 46
K-CONSULTATIO Page 18
K-MOTUS Page 56
K-MOTUS Page 40
K-VENDITIO Page 36
K-VENDITIO Page 36
K-MERCATURA Page 32
K-ZWALLY Page 62
DALI PS Page 65
myPI-LED FOR PC Page 64
DALI TOUCHPANEL Page 66
DALI CDC AND SECQUENCER Page 65
DALI DISPLAY 7" DT8 Page 67
Technical Information Page 72 ff
IIITechnical QualificationInstallation may only be performed by electrically qualified staff.
IndoorOnly for indoor use.
Disposal of luminairesLuminaires must not be disposed of along with the household waste.
IP20
CE Declaration of Conformity Fulfils EU requirements.
IP40IP30Protection categoryAll the luminaires meet the requi-rements of the specified protection category.
RoHS DirectiveHazardous substances have been used within the maximum permitted concentrations.
Protection class 1 / 2 / 3All the luminaires meet the require-ments of the specified protection class.
Working on the luminairemust only be done when disconnected from the electricity supply. Isolate all sides and poles and secure against restarting.
Recessed LuminairesOnly for use as flush-mounted luminaire.
myPI-LED MOBILE Page 63
UNIVERSAL TOUCH DIMMERPage 71
TOP UNIT TOUCH DIMMER Page 71
SWITCH INSERTPage 71
1-GANG ROCKER Page 71
FRAME (2-GANG) Page 71
FRAME (1-GANG) Page 71
4
5
HUMAN CENTRIC LIGHTINGMAKES THE DAY LIGHT
6
9 a.m. – 4,000 Kelvin 12 a.m. – 7,000 Kelvin 3 p.m. – 4,000 Kelvin 6 p.m. – 3,000 Kelvin
7
6 p.m. – 3,000 Kelvin
Bio-rhythmic light and lighting solutions
for private living space
Bio-rhythmic light and lighting solutions
for professional project space
Consulting, planning, light management
and commissioning of Human Centric Lighting
solutions
KITEO is a premium European brand
for challenging bio-rhythmic
LED lighting solutions:
HUMAN CENTRIC LIGHTING
KITEO is the first point of contact for builders, architects, lighting
designers, electricians and end customers from conception and plan-
ning of lighting, through the development of trendsetting luminaires,
up to the implementation of complex Human Centric Lighting projects.
The KITEO portfolio of luminaires includes products that are meant
both for the professional project space and for the private comfort
of your home.
An important aspect of all KITEO solutions is the scenic concept where
the focus is on ambience and a relaxing environment. In addition to
the excellent lighting quality, KITEO focuses on the melanopic action
factor, ie the non-visual effect of light on the natural biorhythm and
thus the health of the human being. To support these factors, KITEO
makes use of the innovative PI-LED technology that unites Human
Centric Lighting and brilliant RGB colour effects in one light source,
bringing daylight into every room while simulating the natural circa-
dian daylight sequence.
HUMAN CENTRIC LIGHTINGLUMINAIRES
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Compact and timeless design— Small construction size— Functionality: Colour temperature 1,800 K – 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— High optical efficiency due to integrated anti-glare reflectors— Soft light mixing and uniform light distribution— UGR <19 for Model Spot 30— Integrated aluminium heat sink— Operating temperature monitoring with automatic dimming function— Mounting: Flush-mounted— Tool-free mounting, using two fixing spring clips for 1 – 15 mm ceiling thickness— DMX available on request
K-SPOT 12 F/SBIORHYTHMIC ALLROUNDER
TECHNICAL DATA
11
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art. No. Luminaire
K-DL12F531 K-Spot 12 recessed luminaire / PI-LED / NeoLink / Flood / White (RAL 9003)
K-DL12F534 K-Spot 12 recessed luminaire / PI-LED / NeoLink / Flood / Brushed aluminium
K-DL12S531 K-Spot 12 recessed luminaire / PI-LED / NeoLink / Spot / White (RAL 9003)
K-DL12S534 K-Spot 12 recessed luminaire / PI-LED / NeoLink / Spot / Brushed aluminium
K-DL12F831 K-Spot 12 recessed luminaire / PI-LED / DALI DT8 / Spot / White (RAL 9003)
K-DL12F834 K-Spot 12 recessed luminaire / PI-LED / DALI DT8 / Flood / Brushed aluminium
K-DL12S831 K-Spot 12 recessed luminaire / PI-LED / DALI DT8 / Flood / White (RAL 9003)
K-DL12S834 K-Spot 12 recessed luminaire / PI-LED / DALI DT8 / Spot / Brushed aluminium
Art.No. Accessories
K-Z1000210 Weatherproof protection cover for K-Spot Flood / White (RAL 9003)
K-Z1000211 Weatherproof protection cover for K-Spot Flood / Brushed aluminium
K-ZNVK500 LV connection cable for NeoLink luminaires, 5m, connecting driver and K-Spot
Art.No. Package with radio control dial
K-DL12F531-S 5 x K-Spot 12 / NeoLink / Flood / White (RAL 9003) / with control and accessories
K-DL12F534-S 5 x K-Spot 12 / NeoLink / Flood / Brushed Aluminium / with control and accessories
ORDER DATA
K-SPOT 12 F/S Recessed luminaire
Dimensions
IP30
WhiteRAL9003
AluminiumbrushedUGR
<19
Ø 90 mm
☐ 95 mm2.5
mm
78 m
m
130
mm
30 mm cable gland incl. cable bend protection
91 m
m g
esam
t
DALI
Circuit breaker type C10 C13 C16 C20 B10 B13 B16 B20
Cable cross-section (mm²) 1.5 1.5 1.5 2.5 1.5 1.5 1.5 2.5
Number of luminaires 6 8 10 12 3 5 5 6
The maximum number of luminaires per automatic circuit breaker is limited due to the starting current of the luminaires. Please take note of the recommendations in the adjacent table.
CCT [K]
VISUAL DATA MELANOPIC ACTION FACTOR
luminous flux [lm ]
alpha(smel)
1,800 790 0.228
2,000 930 0.253
2,500 940 0.326
2,700 910 0.358
3,000 870 0.406
3,500 830 0.481
4,000 805 0.550
4,500 790 0.612
5,000 780 0.668
5,500 770 0.718
6,000 765 0.763
6,500 760 0.803
7,000 760 0.838
8,000 755 0.899
9,000 750 0.947
10,000 750 1.000
12,000 740 1.111
14,000 735 1.220
16,000 730 1.323
K-Spot 12S 30° K-Spot 12F 50°
Luminous source LED moduleConnected load 15 WLuminous flux 870 lmColour temperature 1,800 K –16,000 KBeam angle Spot 30° | Flood 50°CRI 90Protection category IP 30Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs conformityWeight 0.4 kgOperating voltage 230 VAC
(incl. ext. converter)Control mode NeoLink/ZigBee
DALI DT8Protection class IIMounting Flush-mounted
NEW
K-Spot 12
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
K-SPOT FLATTHE NEXT GENERATION OF THE BIORHYTHMIC ALLROUNDER
— Compact and timeless design— Small construction size and small construction height (48 mm)— Functionality: Colour temperature 1,800 K – 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— High optical efficiency due to integrated anti-glare reflectors— Soft light mixing and uniform light distribution— Integrated aluminium heat sink— Operating temperature monitoring with automatic dimming function— Mounting: Flush-mounted— Tool-free mounting, using two fixing spring clips for 1 – 15 mm ceiling thickness
TECHNICAL DATA
13
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
K-SPOT FLAT Recessed luminaire
Art. No. Luminaire*
K-DL-FLAT531 K-Spot Flat recessed luminaire / PI-LED / ZigBee 3.0 / White RAL 9003
K-DL-FLAT534 K-Spot Flat recessed luminaire / PI-LED / ZigBee 3.0 / Brushed aluminium
K-DL-FLAT831 K-Spot Flat recessed luminaire / PI-LED / DALI DT8 / White RAL 9003
K-DL-FLAT834 K-Spot Flat recessed luminaire / PI-LED / DALI DT8 / Brushed aluminium
Art.No. Accessories
K-Z1000270 Weatherproof protection cover for K-Spot 12 Flat/ White RAL 9003
K-Z1000271 Weatherproof protection cover for K-Spot 12 Flat / Brushed aluminium
ORDER DATA
IP30
WhiteRAL9003
Aluminiumbrushed
CCT [K]
VISUAL DATA MELANOPIC ACTION FACTOR
luminous flux [lm ]
alpha(smel)
1,800 560 0.228
2,000 660 0.253
2,500 930 0.326
2,700 915 0.358
3,000 880 0.406
3,500 855 0.481
4,000 830 0.550
4,500 820 0.612
5,000 805 0.668
5,500 805 0.718
6,000 805 0.763
6,500 795 0.803
7,000 795 0.838
8,000 795 0.899
9,000 770 0.947
10,000 720 1.000
12,000 660 1.111
14,000 610 1.220
16,000 585 1.323
DALI
Dimensions (PI-LED LMU and ECG are located outside the luminaire)
NEW from JULY 201963
mm
43 mm
2,5 mm
95 m
m 95 m
m
95 mm
* All products are designed with PI-LED LMU 2.0 and include following features:
– Modular Dimming– ZigBee 3.0 including over-the-air updates– DALI 1 certification and DALI DT8 including over-the-bus updates– LMU housing with strain relief
Luminous source LED moduleConnected load 13 WLuminous flux 880 lmColour temperature 1,800 K –16,000 KCRI 90Protection category IP 30Dimming range 0.1 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs conformityWeight 0.4 kgOperating voltage 230 VAC
(incl. ext. converter)Control mode ZigBee 3.0
DALI DT8Protection class IIMounting Flush-mounted
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Aesthetically pleasing designer housing with integrated wall wash (flood) optics— Ideal indoor use as wide area lighting— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Soft light mixing and uniform light distribution— Microprocessor controlled light and temperature management— Direct 230 VAC connection— Mounting: Ceiling- or wall mounted
SOVT CAMPUSTHE FEEL GOOD LIGHT
TECHNICAL DATA
15
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art. No. Luminaire
SO-CA351-II Sovt Campus surface mounted luminaire / PI-LED / NeoLink / White (RAL 9003)
SO-CA355-II Sovt Campus surface mounted luminaire / PI-LED / NeoLink / Silver (RAL 9006)
Art. No. Package with radio control dial
SO-CA351-II-S 1x Sovt Campus / NeoLink / White (RAL 9003) / with control and accessories
SO-CA355-II-S 1x Sovt Campus / NeoLink / Silver (RAL 9006) / with control and accessories
SOVT CAMPUS Surface-mounted luminaire
ORDER DATA
385 mm
69 mm
Dimensions
IP20
SOVT Campus
SilverRAL 9006
WhiteRAL 9003
CCT [K]
VISUAL DATA MELANOPIC ACTION FACTOR
luminous flux [lm ]
alpha(smel)
1,800 1225 0.237
2,000 1400 0.274
2,500 1900 0.360
2,700 2050 0.392
3,000 1960 0.438
3,500 1865 0.509
4,000 1800 0.573
4,500 1750 0.630
5,000 1720 0.681
5,500 1695 0.726
6,000 1675 0.767
6,500 1670 0.804
7,000 1645 0.836
8,000 1630 0.890
9,000 1615 0.934
10,000 1605 0.970
12,000 1580 1.024
14,000 1560 1.063
16,000 1555 1.091
Luminous source LED moduleConnected load 35 WLuminous flux 1,960 lmColour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs conformityWeight 2.1 kgOperating voltage 230 VACControl mode NeoLink/ZigBeeProtection class IIMounting Surface-mounted
SOVT Campus
DALI DT8 available on request.
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— High-quality suspended luminaire for setting accents and for general lighting— Unique design for customised applications— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Soft light mixing and uniform light distribution— Integrated aluminium heat sink — Operating temperature monitoring with automatic dimming function— Mounting: Pendant
K-SOLIS AND K-SOLIS PURENEW THINKING ABOUT SUNLIGHT
TECHNICAL DATA
17
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art.No. Luminaire
K-SOLIS-NL. K-Solis suspended luminaire / PI-LED / NeoLink / White (RAL 9003)
K-SOLIS-DA. K-Solis suspended luminaire / PI-LED / DALI DT8 / White (RAL 9003)
K-SOLIS-PURE-NL K-Solis suspended luminaire Pure / PI-LED / NeoLink / White (RAL 9003)
K-SOLIS-PURE-DA K-Solis suspended luminaire Pure / PI-LED / DALI DT8 / White (RAL 9003)
ORDER DATA
K-SOLIS and K-SOLIS PURE Pendant luminaires
IP20
Dimensions
504 mm
231 m
m
125
mm
Max. suspension lenght: 1.5 m
DALI
DALI
125
mm
170
mm
120 mm
WhiteRAL 9003
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)K-SOLIS K-SOLIS Pure
1,800 1480 1650 0.226
2,000 1745 1945 0.252
2,500 2170 2495 0.324
2,700 2090 2400 0.357
3,000 2000 2300 0.407
3,500 1910 2195 0.484
4,000 1850 2130 0.554
4,500 1815 2085 0.618
5,000 1790 2055 0.676
5,500 1775 2040 0.728
6,000 1765 2025 0.774
6,500 1755 2015 0.816
7,000 1750 2010 0.852
8,000 1745 2000 0.915
9,000 1740 1995 0.965
10,000 1735 1990 1.033
12,000 1730 1970 1.168
14,000 1720 1950 1.304
16,000 1710 1935 1.439
K-SOLIS K-SOLIS Pure
Luminous source LED moduleConnected load 37 WLuminous flux K-SOLIS 2,000 lm
K-SOLIS PURE 2,300 lmColour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 2 kg | 2.3 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class IMounting Pendant luminaires
K-Solis
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Discreet and uncluttered design for multiple applications— High-quality extruded aluminium profile— Improved concentration and increase in performance at the workplace due to the simulated circadian daylight sequence— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Variants with indirect light components— For direct light components: Glare-reducing microprism reflector optics— Optimal conditions for the displays of work stations UGR<19 (for microprismatic optic)— Operating temperature monitoring with automatic dimming function— Mounting: Surface-mounted | Pendant
K-CONSULTATIOFOR CLEAR SILHOUETTES IN THE OFFICE
TECHNICAL DATA
19
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Dimensions
1,160 mm
90 m
m
82.2 mm
Length of wire suspension for pendant luminaire:
2,000 mm
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm]alpha(smel)
dir, opal dir, Prisma indir,
1,800 1960 1800 1000 0.258
2,000 2220 2040 1125 0.293
2,500 2900 2665 1460 0.371
2,700 3190 2930 1600 0.400
3,000 3500 3200 1700 0.440
3,500 3330 3045 1625 0.501
4,000 3220 2950 1575 0.554
4,500 3150 2880 1540 0.602
5,000 3095 2835 1520 0.645
5,500 3060 2800 1505 0.683
6,000 3030 2775 1495 0.716
6,500 3005 2755 1490 0.748
7,000 2990 2740 1480 0.775
8,000 2940 2635 1475 0.821
9,000 2720 2440 1470 0.858
10,000 2560 2300 1470 0.888
12,000 2350 2110 1470 0.933
14,000 2220 1990 1465 0.965
16,000 2125 1910 1465 0.989
ORDER DATA
IP20
DALI
Art.No. Luminaire
K-CONS-ABL-1200-MP-NLK-Consultatio surface mounted luminaire / PI-LED / MP / NeoLink / Anodized Aluminium
K-CONS-ABL-1200-OP-NLK-Consultatio surface mounted luminaire / PI-LED / OP / NeoLink / Anodized Aluminium
K-CONS-ABL-1200-MP-DAK-Consultatio surface mounted luminaire / PI-LED / MP /DALI DT8 / Anodized Aluminium
K-CONS-ABL-1200-OP-DAK-Consultatio surface mounted luminaire / PI-LED / OP /DALI DT8 / Anodized Aluminium
K-CONS-HL-1200-MP-NL-DIK-Consultatio suspended luminaire / PI-LED / MP-DI /NeoLink / Anodized Aluminium
K-CONS-HL-1200-MP-NL-INK-Consultatio suspended luminaire / PI-LED / MP-IN /NeoLink / Anodized Aluminium
K-CONS-HL-1200-OP-NL-DIK-Consultatio suspended luminaire / PI-LED / OP-DI /NeoLink / Anodized Aluminium
K-CONS-HL-1200-OP-NL-INK-Consultatio suspended luminaire / PI-LED / OP-IN /NeoLink / Anodized Aluminium
K-CONS-HL-1200-MP-DA-DIK-Consultatio suspended luminaire / PI-LED / MP-DI /DALI DT8 / Anodized Aluminium
K-CONS-HL-1200-MP-DA-INK-Consultatio suspended luminaire / PI-LED / MP-IN /DALI DT8 / Anodized Aluminium
K-CONS-HL-1200-OP-DA-DIK-Consultatio suspended luminaire / PI-LED / OP-DI /DALI DT8 / Anodized Aluminium
K-CONS-HL-1200-OP-DA-INK-Consultatio suspended luminaire / PI-LED / OP-IN /DALI DT8 / Anodized Aluminium
Art.No. Accessory
K-Z1001020** Profile connector with threaded pins
** 1 pc. K-Z1001020 contains 4 single connecting pieces which connect 2 luminaires to form a lighted strip.
Anodized Aluminium
UGR<19
K-Consultatio
K-CONSULTATIO direct microprismatic K-CONSULTATIO direct opal
K-CONSULTATIO microprismaticindirect/direct
K-CONSULTATIO opal indirect/direct
Luminous source LED moduleConnected load 42 W (direct)
60 W (indirect/direct)Luminous flux direct opal: 3,500 lm
direct prismatic: 3,200 lmindirect: 1,700 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category / Protection class
IP 20 / I
Dimming range CCT/CIE-xy 5 – 100 %RGB 0 – 100 %
Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 5 kgOperating voltage 230 VAC 50HzControl mode NeoLink/ZigBee
DALI DT8Mounting Surface-mounted |
Pendant luminaire
K-CONSULTATIO Surface-mounted | Pendant luminaire
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Ideal indoor use as wide indoor area lighting— Improved concentration and increase in performance at the workplace due to the simulated circadian daylight sequence— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration — Glare-reducing microprism reflector optics— Optimal conditions for the displays of work stations UGR<19— Operating temperature monitoring with automatic dimming function— Construction size according to popular modular dimensions— Direct 230 V mains connection— Mounting: Flush-mounted | Surface-mounted
K-AERASEEING BECOMES AN EXPERIENCE
TECHNICAL DATA
21
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art.No. Luminaire
K-AE-QE-625-NL. K-Aera recessed luminaire / PI-LED / NeoLink / White (RAL 9003)
K-AE-QA-625-NL. K-Aera surface mounted luminaire / PI-LED / NeoLink / White (RAL 9003)
K-AE-QE-625-DA. K-Aera recessed luminaire / PI-LED / DALI DT8 / White (RAL 9003)
K-AE-QA-625-DA. K-Aera surface mounted luminaire / PI-LED / DALI DT8 / White (RAL 9003)
ORDER DATA
K-AERA Panel light
IP20
Dimensions
622
mm
622 mm
☐ 610 mm
97
mm
UGR<19
DALI
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm ]
alpha(smel)
1,800 2500 0.259
2,000 2835 0.295
2,500 3730 0.377
2,700 4100 0.407
3,000 4700 0.450
3,500 4600 0.515
4,000 4445 0.574
4,500 4340 0.625
5,000 4265 0.672
5,500 4210 0.713
6,000 4170 0.750
6,500 4140 0.784
7,000 4115 0.814
8,000 4075 0.864
9,000 4050 0.905
10,000 4035 0.938
12,000 3930 0.987
14,000 3705 1.022
16,000 3552 1.049
WhiteRAL 9003
K-AERA
Luminous source LED moduleConnected load 57 WLuminous flux 4,700 lmColour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 8.5 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class IMounting Flush-mounted
Surface-mounted
K-Aera
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
K-AERA FLATBRINGS THE SUN INTO THE ROOM
— Ideal indoor use as wide indoor area lighting— Improved concentration and increase in performance at the workplace due to the simulated circadian daylight sequence— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration — Glare-reducing microprism reflector optics— Very flat design by using PI-LED Edge Light modules— Uniform light distribution and mixing through edge lighting— Optimal conditions for the displays of work stations UGR<19— Operating temperature monitoring with automatic dimming function— Construction size according to popular modular dimensions— Direct 230 V mains connection— Mounting: Flush-mounted | Surface-mounted | Pendant
TECHNICAL DATA
23
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
IP20
Dimensions
K-AERA FLAT
☐ 600 mm ☐ 625 mm
50
mm
620 mm595 mm
595
mm
620
mm
Luminous source LED moduleConnected load 48 WLuminous flux 3,600 lmColour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 8.5 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class IMounting Flush-mounted
Surface-mountedPendant luminaire
K-AERA FLAT Panel light | Pendant luminaire
K-Aera Flat
WhiteRAL 9003
NEW
UGR<19
Microprismatic
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm ]
alpha(smel)
1,800 2300 0.261
2,000 2600 0.298
2,500 3410 0.384
2,700 3750 0.416
3,000 3600 0.462
3,500 3430 0.532
4,000 3325 0.595
4,500 3250 0.651
5,000 3200 0.701
5,500 3170 0.746
6,000 3140 0.786
6,500 3120 0.823
7,000 3105 0.856
8,000 3085 0.910
9,000 3070 0.954
10,000 3060 0.990
12,000 3055 1.044
14,000 3050 1.082
16,000 3050 1.111
Art.No. Luminaire*
K-AEF-595-NL K-Aera Flat Luminaire / PI-LED / NeoLink / 595mm
K-AEF-620-NL K-Aera Flat Luminaire / PI-LED / NeoLink / 620mm
K-AEF-595-DA K-Aera Flat Luminaire / PI-LED / DALI DT8 / 595mm
K-AEF-620-DA K-Aera Flat Luminaire / PI-LED / DALI DT8 / 620mm
Art.No. Accessory
LTX-1751-00-00 Wire suspension K-AERA FLAT
LTX-1751-01-00 Mounting clip K-AERA FLAT
LTX-1751-02-00 Mounting frame 595x595x60mm K-AERA FLAT
LTX-1751-03-00 Mounting frame 620x620x60mm K-AERA FLAT
ORDER DATA
Wire suspension sketch
Mounting clips Recessed mounting accessory Mounting frame
Wire suspension
*The 595mm variants are available from Q4 / 2019.
DALI
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— VIBE brings sunlight into every room— Unique design and high-quality materials— Aluminium frame, powder-coated, RAL 9003, matt— Functionality: Colour temperature 1,800 K to 16,000 K — High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Soft light mixing and uniform light distribution— Direct and indirect lighting can be controlled separately— Operating temperature monitoring with automatic dimming function— Direct 230 V mains connection— Mounting: Pendant
VIBEINSPIRED BY THE SUN – REINVENTING LIGHT
TECHNICAL DATA
25
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art.No. Luminaire
K-VBHL-NL-810 Vibe suspended luminaire / PI-LED / NeoLink / White (RAL 9003)
K-VBHL-DA-810 Vibe suspended luminaire / PI-LED / DALI DT8 / White (RAL 9003)
Art. No. Package with radio control dial
K-VBHL-NL-810-S 1x Vibe suspended luminaire, White, NeoLink, with control and accessories
ORDER DATA
VIBE Pendant luminaire
IP20
Dimensions
Max. suspension length: 1.5 m (with 0.9 m single cord suspension)
390
mm
600
mm
510 mm
810
mm
WhiteRAL 9003
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm ]
alpha(smel)
1,800 2685 0.231
2,000 3165 0.256
2,500 4040 0.334
2,700 3925 0.376
3,000 3800 0.439
3,500 3685 0.540
4,000 3630 0.634
4,500 3610 0.721
5,000 3610 0.799
5,500 3615 0.870
6,000 3630 0.934
6,500 3650 0.992
7,000 3645 1.043
8,000 3230 1.130
9,000 2950 1.202
10,000 2745 1.260
12,000 2490 1.349
14,000 2330 1.413
16,000 2220 1.460
VIBE direct VIBE indirect
Luminous source LED moduleConnected load 72 WLuminous flux 3,800 lmColour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 7 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class IMounting Pendant luminaire
Vibe
DALI
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Unique mirror luminaires with automatic daylight sequence— Natural anodized aluminium— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Soft light mixing and uniform light distribution— Direct and indirect lighting— Operating temperature monitoring with automatic dimming function— Direct 230 V mains connection— Mounting: Surface (wall) mounted
LIQUIDPERFECT LIGHT FOR EVERY OCCASION
TECHNICAL DATA
27
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art.No. Luminaire
K-LQ-0600-WM Liquid wall-mounted luminaire / PI-LED / NeoLink / 600mm / Aluminium naturally anodized
K-LQ-0800-WM Liquid wall-mounted luminaire / PI-LED / NeoLink / 800mm / Aluminium naturally anodized
K-LQ-1000-WM Liquid wall-mounted luminaire / PI-LED / NeoLink / 1000mm / Aluminium naturally anodized
K-LQ-1200-WM Liquid wall-mounted luminaire / PI-LED / NeoLink / 1200mm / Aluminium naturally anodized
Art.No. Package changing room
K-LQ-1000-WM-BP Basic package: 1 x Liquid wall-mounted luminaire, 1000mm with four-fold wireless pushbutton
K-LQ-1000-WM-KP Comfort package: 1 x Liquid wall-mounted luminaire, 1000mm with 2x K-Spot 12F and 1x 4-fold wireless pushbutton
Art.No. Radio push button (4-gang)
K-Z1001016 Four-fold wall switch studio white
K-Z1001017 One-fold frame for wall switch, studio white
ORDER DATA
LIQUID Mirror luminaire
radio push button (4-gang)
Aluminiumnatural anodized
IP30
Dimensions
35 m
m
80 mm 101 mm
600 mm800 mm
1,000 mm1,200 mm
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm]alpha(smel)600 mm
800 mm1,000mm
1,200mm
1,800 580 850 1125 0.256
2,000 655 960 1270 0.291
2,500 860 1265 1670 0.370
2,700 945 1395 1840 0.399
3,000 950 1400 1850 0.440
3,500 905 1335 1760 0.503
4,000 875 1290 1705 0.559
4,500 855 1260 1665 0.608
5,000 840 1240 1635 0.653
5,500 830 1220 1615 0.692
6,000 820 1210 1600 0.727
6,500 815 1200 1590 0.760
7,000 810 1195 1580 0.789
8,000 805 1185 1565 0.836
9,000 800 1180 1555 0.875
10,000 795 1175 1550 0.906
12,000 790 1170 1540 0.953
14,000 790 1165 1535 0.987
16,000 785 1160 1530 1.012
LIQUID 1200mm
Luminous source LED moduleConnected load 600 / 800 mm: 25 W
1,000 mm: 35 W1,200 mm: 43 W
Luminous flux 600 / 800 mm: 950 lm1,000 mm: 1,400 lm1,200 mm: 1,850 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category IP 30Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 600 mm: 2.5 kg
800 mm: 3.2 kg1,000 mm: 4.0 kg1,200 mm: 4.8 kg
Operating voltage 230 VACControl mode NeoLink/ZigBeeProtection class IIMounting Surface-mounted (wall)
Liquid
DALI DT8 available on request.
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
K-VIRTUS IIEXPANDS THE HORIZON
— Unique free-standing luminaire with automatic daylight sequence, brightness sensor and presence detector— Improved concentration and increase in performance at the workplace due to the simulated circadian daylight sequence— Direct and indirect lighting can be controlled separately— Glare-reducing optics— Optimal conditions for the displays of work stations UGR<19— Colours: Silver, Black, White— Functionality: Colour temperature 1,800 K to 16,000 K— Uniform light distribution and mixing through PI-LED Edge Lightt Module— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Operating temperature monitoring with automatic dimming function— Direct 230 V mains connection
TECHNICAL DATA
29
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art.No. Luminaire
K-KII-NL-01 K-Virtus II free-standing luminaire / PI-LED / NeoLink / White
K-KII-NL-03 K-Virtus II free-standing luminaire / PI-LED / NeoLink / Black
K-KII-NL-04 K-Virtus II free-standing luminaire / PI-LED / NeoLink / Silver
Art.No. Accessory
K-ZWALLY-4.1 NeoLink Wheel Control, seasonal course of daylight, UTC+1
Art.No. Package
K-KII-NL-01-S Complete package free-standing luminaire / White / with 1 x K-ZWALLY
K-KII-NL-03-S Complete package free-standing luminaire / Black / with 1 x K-ZWALLY
K-KII-NL-05-S Complete package free-standing luminaire / Silver / with 1 x K-ZWALLY
ORDER DATA
K-VIRTUS II Free-standing luminaire
Dimensions
IP20
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)direkt indirekt
1,800 2040 2100 0.264
2,000 2305 2370 0.299
2,500 3020 3120 0.377
2,700 3320 3450 0.405
3,000 3800 3950 0.445
3,500 3750 3800 0.506
4,000 3630 3660 0.560
4,500 3540 3575 0.608
5,000 3480 3510 0.650
5,500 3440 3460 0.688
6,000 3400 3425 0.722
6,500 3380 3400 0.753
7,000 3360 3370 0.781
8,000 3330 3340 0.827
9,000 3310 3315 0.864
10,000 3300 3300 0.894
12,000 3280 3280 0.939
14,000 3270 3280 0.972
16,000 3260 3275 0.996
Luminous source PI-LED Edge Light Module
Connected load 100 WLuminous flux direct: 3,800 lm
indirect: 3,950 lmColour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 21.5 kgOperating voltage 230 VACControl mode NeoLink/ZigBeeProtection class I
K-Virtus II
Silver
White
Black
UGR<19
800 mm 354 mm
1950 mm
325 mm530 mm
30 mm
15 mm
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Sleek design and clear silhouettes — Three different beam angles— Uncluttered ceiling outline despite various lighting functions— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Soft light mixing and uniform light distribution— Slewing range 355° | Swivel range 180°— Highly permeable safety glass— Passive cooling including thermal management— Mounting: Bus bar
K-FORUMNEW FOCUS FOR NEW LIGHT
TECHNICAL DATA
31
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Fixed White on request.
Art.No. Luminaire
K-FO-25-NZ-W K-Forum track-mounted spotlight 25° / PI-LED / NeoLink / White
K-FO-25-NZ-S K-Forum track-mounted spotlight 25° / PI-LED / NeoLink / Silver
K-FO-40-NZ-W K-Forum track-mounted spotlight 40° / PI-LED / NeoLink / White
K-FO-40-NZ-S K-Forum track-mounted spotlight 40° / PI-LED / NeoLink / Silver
K-FO-60-NZ-W K-Forum track-mounted spotlight 60° / PI-LED / NeoLink / White
K-FO-60-NZ-S K-Forum track-mounted spotlight 60° / PI-LED / NeoLink / Silver
K-FO-25-DA-W K-Forum track-mounted spotlight 25° / PI-LED / DALI DT8 / White
K-FO-25-DA-S K-Forum track-mounted spotlight 25° / PI-LED / DALI DT8 / Silver
K-FO-40-DA-W K-Forum track-mounted spotlight 40° / PI-LED / DALI DT8 / White
K-FO-40-DA-S K-Forum track-mounted spotlight 40° / PI-LED / DALI DT8 / Silver
K-FO-60-DA-W K-Forum track-mounted spotlight 60° / PI-LED / DALI DT8 / White
K-FO-60-DA-S K-Forum track-mounted spotlight 60° / PI-LED / DALI DT8 / Silver
ORDER DATA
K-FORUM Track light
IP20
Dimensions
230
mm
120 mm
109
mm
Ø 90 mm
White
Silver
DALI
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)25° 40° 60°
1,800 1390 1365 1385 0.241
2,000 1635 1605 1630 0.267
2,500 2355 2315 2345 0.333
2,700 2660 2615 2650 0.368
3,000 2620 2580 2610 0.419
3,500 2515 2475 2505 0.500
4,000 2450 2410 2440 0.575
4,500 2415 2375 2405 0.643
5,000 2390 2350 2380 0.704
5,500 2375 2335 2365 0.759
6,000 2365 2325 2355 0.808
6,500 2360 2320 2350 0.853
7,000 2360 2320 2350 0.892
8,000 2355 2320 2350 0.958
9,000 2360 2320 2350 1.012
10,000 2365 2325 2350 1.056
12,000 2205 2170 2195 1.123
14,000 2060 2025 2050 1.171
16,000 1965 1930 1955 1.206
K-FORUM 25° K-FORUM 40° K-FORUM 60°
Luminous source LED moduleConnected load 34 WBeam angle 25° | 40° | 60°Luminous flux 25°-Reflector: 2,620 lm
40°-Reflector: 2,580 lm60°-Reflector: 2,610 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category / Protection class
IP 20 / I
Dimming range CCT/CIE-xy 5 – 100 %RGB 0 – 100 %
Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 1.6 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Mounting Bus barBus bar NeoLink: GLOBAL GA69
DALI DT8: EUTRAC MultiAdapterPlus
K-Forum
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Discreet design for multiple applications— Available as single or with double mounting frame— Flush mount housing, powder coated in black on the inside— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Highly permeable safety glass — Soft light mixing and uniform light distribution— Swivel range 30°— Passive cooling including thermal management— Mounting: Flush-mounted
K-MERCATURABEST LIGHT FOR LARGE ROOMS
TECHNICAL DATA
33
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
K-MERCATURA Recessed luminaire
Dimensions
200 mm
170 mm
☐ 180 mm
187
mm
Mercatura IIMercatura I
350 mm x 180 mm
340 mm x 170 mm
370 mm x 200 mm
IP20
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)15°/35° 45° 65°
1.800 1460 1450 1435 0,244
2.000 1715 1705 1690 0,269
2.500 2460 2440 2425 0,337
2.700 2740 2725 2700 0,372
3.000 2640 2620 2600 0,423
3.500 2530 2515 2495 0,502
4.000 2465 2450 2430 0,575
4.500 2425 2410 2390 0,642
5.000 2400 2385 2365 0,702
5.500 2385 2370 2350 0,756
6.000 2375 2360 2340 0,804
6.500 2370 2355 2335 0,847
7.000 2365 2350 2330 0,885
8.000 2365 2350 2330 0,950
9.000 2365 2350 2330 1,003
10.000 2365 2350 2330 1,045
12.000 2200 2185 2165 1,111
14.000 2055 2040 2025 1,157
16.000 1900 1890 1870 1,213
Mercatura I
DALI
Mercatura II
Silver
White
K-MERCATURA 15° K-MERCATURA 35°
K-MERCATURA 45° K-MERCATURA 65°
ORDER DATAArt.No. Luminaire
K-MEI-15-xx-y K-Mercatura I 15° / PI-LED / xx / y
K-MEI-35-xx-y K-Mercatura I 35° / PI-LED / xx / y
K-MEI-45-xx-y K-Mercatura I 45° / PI-LED / xx / y
K-MEI-65-xx-y K-Mercatura I 65° / PI-LED / xx / y
K-MEII-15-xx-y K-Mercatura II 15° / PI-LED / xx / y
K-MEII-35-xx-y K-Mercatura II 35° / PI-LED / xx / y
K-MEII-45-xx-y K-Mercatura II 45° / PI-LED / xx / y
K-MEII-65-xx-y K-Mercatura II 65° / PI-LED / xx / y
xx = NZ (NeoLink) or DA (DALI DT8)y = W (White) or S (Silver)
Luminous source LED moduleConnected load 34 WBeam angle 15° | 35° | 45° | 65°Luminous flux 15° / 35°-Reflector: 2,640 lm
45°-Reflector: 2,620 lm65°-Reflector: 2,600 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 1.9 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class |Mounting Flush-mounted
All values are relevant for Mercatura I
gleich wie Deutsch??
Fixed White on request.
K-Mercatura
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Classical design for multiple applications— Four different beam angles for all lighting functions— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Highly permeable safety glass — Soft light mixing and uniform light distribution— Swivel range 30°— Passive cooling including thermal management— Mounting: Flush-mounted
K-CATASTACLASSICAL DESIGN MEETS FLEXIBILITY
TECHNICAL DATA
35
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Fixed White on request.
Art.No. Luminaire
K-CA-15-NZ-W K-Catasta 15° / PI-LED / NeoLink / White
K-CA-15-NZ-S K-Catasta 15° / PI-LED / NeoLink / Silver
K-CA-35-NZ-W K-Catasta 35° / PI-LED / NeoLink / White
K-CA-35-NZ-S K-Catasta 35° / PI-LED / NeoLink / Silver
K-CA-45-NZ-W K-Catasta 45° / PI-LED / NeoLink / White
K-CA-45-NZ-S K-Catasta 45° / PI-LED / NeoLink / Silver
K-CA-65-NZ-W K-Catasta 65° / PI-LED / NeoLink / White
K-CA-65-NZ-S K-Catasta 65° / PI-LED / NeoLink / Silver
K-CA-15-DA-W K-Catasta 15° / PI-LED / DALI DT8 / White
K-CA-15-DA-S K-Catasta 15° / PI-LED / DALI DT8 / Silver
K-CA-35-DA-W K-Catasta 35° / PI-LED / DALI DT8 / White
K-CA-35-DA-S K-Catasta 35° / PI-LED / DALI DT8 / Silver
K-CA-45-DA-W K-Catasta 45° / PI-LED / DALI DT8 / White
K-CA-45-DA-S K-Catasta 45° / PI-LED / DALI DT8 / Silver
K-CA-65-DA-W K-Catasta 65° / PI-LED / DALI DT8 / White
K-CA-65-DA-S K-Catasta 65° / PI-LED / DALI DT8 / Silver
ORDER DATA
K-CATASTA Recessed luminaire
Dimensions
Ø 185 mm
Ø 153 mm
Ø 165 mm
Swivel range 12°
185
mm
IP20
DALI
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)15°/35° 45° 65°
1,800 1460 1450 1435 0.244
2,000 1715 1705 1670 0.269
2,500 2455 2440 2420 0.337
2,700 2740 2725 2700 0.372
3,000 2640 2620 2600 0.423
3,500 2530 2515 2495 0.502
4,000 2465 2450 2430 0.575
4,500 2425 2410 2390 0.642
5,000 2400 2385 2365 0.702
5,500 2385 2370 2350 0.756
6,000 2375 2360 2340 0.804
6,500 2370 2355 2335 0.847
7,000 2365 2350 2330 0.885
8,000 2360 2350 2330 0.950
9,000 2365 2350 2330 1.003
10,000 2365 2350 2330 1.045
12,000 2200 2185 2165 1.111
14,000 2055 2040 2025 1.157
16,000 1900 1885 1870 1.213
Silver
White
K-CATASTA 15° K-CATASTA 35°
K-CATASTA 45° K-CATASTA 65°
Luminous source LED moduleConnected load 34 WBeam angle 15° | 35° | 45° | 65°Luminous flux 15° / 35°-Reflector: 2,640 lm
45°-Reflector: 2,620 lm65°-Reflector: 2,600 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 1.4 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class |Mounting Flush-mounted
K-Catasta
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— One luminaire for different requirements— Four different beam angles for all lighting functions— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Highly permeable safety glass — Soft light mixing and uniform light distribution— Available as single or with double mounting frame— Swivel range 30°— Passive cooling including thermal management— Mounting: Flush-mounted
K-VENDITIOSINGLE SOLUTION FOR VARIOUS REQUIREMENTS
TECHNICAL DATA
37
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Fixed White on request.
K-VENDITIO Recessed luminaire
Dimensions
☐ 185 mm
☐ 165 mm
185
mm
Venditio I Venditio II330 mm x 165 mm
350 mm x 185 mm
IP20
Venditio I
DALI
Venditio II
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)15°/35° 45° 65°
1,800 1460 1450 1440 0.244
2,000 1715 1705 1690 0.269
2,500 2460 2440 2425 0.337
2,700 2740 2725 2700 0.372
3,000 2640 2620 2600 0.423
3,500 2530 2515 2495 0.502
4,000 2465 2450 2430 0.575
4,500 2425 2410 2390 0.642
5,000 2400 2385 2365 0.702
5,500 2385 2370 2350 0.756
6,000 2375 2360 2340 0.804
6,500 2370 2355 2333 0.847
7,000 2365 2350 2330 0.885
8,000 2365 2350 2330 0.950
9,000 2365 2350 2330 1.003
10,000 2365 2350 2330 1.045
12,000 2200 2185 2165 1.111
14,000 2055 2040 2025 1.157
16,000 1900 1885 1870 1.213
Silver
White
K-VENDITIO 15° K-VENDITIO 35°
K-VENDITIO 45° K-VENDITIO 65°
ORDER DATAArt.No. Luminaire
K-VOI-15-xx-y K-Venditio I 15° / PI-LED / xx / y
K-VOI-35-xx-y K-Venditio I 35° / PI-LED / xx / y
K-VOI-45-xx-y K-Venditio I 45° / PI-LED / xx / y
K-VOI-65-xx-y K-Venditio I 65° / PI-LED / xx / y
K-VOII-15-xx-y K-Venditio II 15° / PI-LED / xx / y
K-VOII-35-xx-y K-Venditio II 35° / PI-LED / xx / y
K-VOII-45-xx-y K-Venditio II 45° / PI-LED / xx / y
K-VOII-65-xx-y K-Venditio II 65° / PI-LED / xx / y
xx = NZ (NeoLink) or DA (DALI DT8)y = W (White) or S (Silver)
Luminous source LED moduleConnected load 34 WBeam angle 15° | 35° | 45° | 65°Luminous flux 15° / 35°-Reflector: 2,640 lm
45°-Reflector: 2,620 lm65°-Reflector: 2,600 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 1.4 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class |Mounting Flush-mounted
All values are relevant for Venditio I
K-Venditio
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Classical downlight with automatic daylight sequence— Four different beam angles for multiple lighting functions— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Highly permeable safety glass — Soft light mixing and uniform light distribution— Passive cooling including thermal management— Mounting: Flush-mounted
K-SPOT 30BIORHYTHMIC CLASSIC
TECHNICAL DATA
39
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Fixed White on request.
Art.No. Luminaire
K-S30-15-NZ-W K-Spot 30 15° / PI-LED / NeoLink / White
K-S30-15-NZ-S K-Spot 30 15° / PI-LED / NeoLink / Silver
K-S30-35-NZ-W K-Spot 30 35° / PI-LED / NeoLink / White
K-S30-35-NZ-S K-Spot 30 35° / PI-LED / NeoLink / Silver
K-S30-45-NZ-W K-Spot 30 45° / PI-LED / NeoLink / White
K-S30-45-NZ-S K-Spot 30 45° / PI-LED / NeoLink / Silver
K-S30-65-NZ-W K-Spot 30 65° / PI-LED / NeoLink / White
K-S30-65-NZ-S K-Spot 30 65° / PI-LED / NeoLink / Silver
K-S30-15-DA-W K-Spot 30 15° / PI-LED / DALI DT8 / White
K-S30-15-DA-S K-Spot 30 15° / PI-LED / DALI DT8 / Silver
K-S30-35-DA-W K-Spot 30 35° / PI-LED / DALI DT8 / White
K-S30-35-DA-S K-Spot 30 35° / PI-LED / DALI DT8 / Silver
K-S30-45-DA-W K-Spot 30 45° / PI-LED / DALI DT8 / White
K-S30-45-DA-S K-Spot 30 45° / PI-LED / DALI DT8 / Silver
K-S30-65-DA-W K-Spot 30 65° / PI-LED / DALI DT8 / White
K-S30-65-DA-S K-Spot 30 65° / PI-LED / DALI DT8 / Silver
ORDER DATA
K-SPOT 30 Recessed luminaire
IP20
Dimensions
Ø 135 mm
Ø 125 mm
150
mm
DALI
Silver
White
K-SPOT 30 15° K-SPOT 30 35°
K-SPOT 30 45° K-SPOT 30 65°
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)15°/35° 45° 65°
1,800 1460 1450 1440 0.244
2,000 1715 1705 1690 0.269
2,500 2460 2440 2425 0.337
2,700 2740 2725 2700 0.372
3,000 2640 2620 2600 0.423
3,500 2530 2515 2495 0.502
4,000 2465 2450 2430 0.575
4,500 2425 2410 2390 0.642
5,000 2400 2385 2365 0.702
5,500 2385 2370 2350 0.756
6,000 2375 2360 2340 0.804
6,500 2370 2355 2333 0.847
7,000 2365 2350 2330 0.885
8,000 2365 2350 2330 0.950
9,000 2365 2350 2330 1.003
10,000 2365 2350 2330 1.045
12,000 2200 2185 2165 1.111
14,000 2055 2040 2025 1.157
16,000 1900 1885 1870 1.213
Luminous source LED moduleConnected load 34 WBeam angle 15° | 35° | 45° | 65°Luminous flux 15° / 35°-Reflector: 2,640 lm
45°-Reflector: 2,620 lm65°-Reflector: 2,600 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 1 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class |Mounting Flush-mounted
K-Spot 30
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Compact design with small construction height— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Automatic daytime sequence— Soft light mixing and uniform light distribution— 35° rotatable— Bayonet-lock spring-clip mounting— Mounting: Flush-mounted
K-MOTUSSMALL, SMALLER, BIORHYTHMIC
TECHNICAL DATA
41
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Can be flush mounted in concrete ceiling.
ORDER DATA
3,000 K Fixed White also available.
K-MOTUS Recessed luminaire
Dimensions
IP20III
Matt chromium
Ø 70 mm
Ø 81 mm1,1 m
m (W
eiß)
,2
mm
(Chr
om-M
att)
100
mm
Ø 80 mm
2 m
m
100
mm
☐ 95 mm
K-Motus round K-Motus square
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm ]
alpha(smel)
1,800 430 0.241
2,000 505 0.266
2,500 710 0.345
2,700 695 0.381
3,000 670 0.435
3,500 645 0.519
4,000 630 0.597
4,500 620 0.668
5,000 615 0.732
5,500 615 0.789
6,000 610 0.841
6,500 610 0.887
7,000 610 0.928
8,000 610 0.998
9,000 590 1.054
10,000 550 1.100
12,000 500 1.171
14,000 470 1.221
16,000 450 1.257
White
K-MOTUS
Luminous source LED moduleConnected load 13.3 WBeam angle 50°Luminous flux 670 lmColour temperature 1,800 K –16,000 KCRI 90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 0.4 kgOperating voltage 230 VACControl mode NeoLink/ZigBeeProtection class |IMounting Flush-mounted
K-Motus
Art.No. K-MOTUS
K-MO-R-40-NL-WH. K-Motus recessed luminaire / PI-LED / NeoLink / round / white
K-MO-R-40-NL-CM. K-Motus recessed luminaire / PI-LED / NeoLink / round / matt chrome
K-MO-E-40-NL-WH. K-Motus recessed luminaire / PI-LED / NeoLink / square / white
K-MO-E-40-NL-CM. K-Motus recessed luminaire / PI-LED / NeoLink / square / matt chrome
K-MO-R-40-DA-WH. K-Motus recessed luminaire / DALI DT8 / NeoLink / round / white
K-MO-R-40-DA-CM. K-Motus recessed luminaire / DALI DT8 / NeoLink / round / matt chrome
K-MO-E-40-DA-WH. K-Motus recessed luminaire / DALI DT8 / NeoLink / square / white
K-MO-E-40-DA-CM. K-Motus recessed luminaire / DALI DT8 / NeoLink / square / matt chrome
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— Square downlight with automatic daylight sequence— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration — Soft light mixing and uniform light distribution— Reflector, matt, with diffuser— Three different construction sizes available— Mounting: Flush-mounted
ATRIUM KIUBSPECIALIST AT WORK
TECHNICAL DATA
43
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art.No. Luminaire
AK-SNLAIP40-01 Atrium Kiub S recessed luminaire / PI-LED / NeoLink / IP40 / White (RAL 9003)
AK-SNLAIP44-01 Atrium Kiub S recessed luminaire / PI-LED / NeoLink / IP44 / White (RAL 9003)
AK-MNLAIP40-01 Atrium Kiub M recessed luminaire / PI-LED / NeoLink / IP40 / White (RAL 9003)
AK-MNLAIP44-01 Atrium Kiub M recessed luminaire / PI-LED / NeoLink / IP44 / White (RAL 9003)
AK-LNLAIP40-01 Atrium Kiub L recessed luminaire / PI-LED / NeoLink / IP40 / White (RAL 9003)
AK-LNLAIP44-01 Atrium Kiub L recessed luminaire / PI-LED / NeoLink / IP44 / White (RAL 9003)
AK-SDT8IP40-01Atrium Kiub S recessed luminaire / PI-LED / DALI DT8 / IP40 / White (RAL 9003)
AK-SDT8IP44-01Atrium Kiub S recessed luminaire / PI-LED / DALI DT8 / IP44 / White (RAL 9003)
AK-MDT8IP40-01Atrium Kiub M recessed luminaire / PI-LED / DALI DT8 / IP40 / White (RAL 9003)
AK-MDT8IP44-01Atrium Kiub M recessed luminaire / PI-LED / DALI DT8 / IP44 / White (RAL 9003)
AK-LDT8IP40-01 Atrium Kiub L recessed luminaire / PI-LED / DALI DT8 / IP40 / White (RAL 9003)
AK-LDT8IP44-01 Atrium Kiub L recessed luminaire / PI-LED / DALI DT8 / IP44 / White (RAL 9003)
ORDER DATA
ATRIUM KIUB Recessed luminaire
Dimensions
Atrium Kiub S
☐ 150 mm
☐ 265 mm
97 m
m
☐ 200 mm ☐ 250 mm
☐ 165 mm ☐ 215 mm
107
mm
127
mm
Atrium Kiub M Atrium Kiub L
IP40
DALI
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)S M L
1,800 910 1515 1890 0.234
2,000 1065 1780 2220 0.260
2,500 1295 2160 2700 0.324
2,700 1250 2085 2605 0.359
3,000 1200 2000 2500 0.409
3,500 1150 1915 2390 0.489
4,000 1115 1860 2325 0.562
4,500 1100 1830 2285 0.629
5,000 1085 1805 2260 0.689
5,500 1075 1790 2240 0.743
6,000 1070 1785 2230 0.791
6,500 1070 1775 2220 0.835
7,000 1065 1775 2215 0.873
8,000 1060 1770 2215 0.938
9,000 1060 1770 2215 0.991
10,000 1020 1700 2125 1.034
12,000 925 1535 1920 1.100
14,000 860 1435 1795 1.147
16,000 785 1305 1630 1.194
WhiteRAL 9003
ATRIUM KIUB S ATRIUM KIUB M ATRIUM KIUB L
Luminous source LED moduleConnected load S | M | L
20 W | 25 W | 35 W
Beam angle S | M | L 75° | 82° | 80°Luminous flux S: 1,200 lm
M: 2,000 lmL: 2,500 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category IP 40 oder IP 44Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight S | M | L 1.6 kg | 2 kg | 2.3 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class |IMounting Flush-mounted
Atrium Kiub
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
— High-quality downlight with automatic daylight sequence— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Soft light mixing and uniform light distribution— Reflector, matt, with diffuser— Three different construction sizes available— Mounting: Flush-mounted
ATRIUM RONQSPECIAL FOCUS
TECHNICAL DATA
45
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Art.No. Luminaire
AR-SNLAIP40-01 Atrium Ronq S recessed luminaire / PI-LED / NeoLink / IP40 / White (RAL 9003)
AR-SNLAIP54-01 Atrium Ronq S recessed luminaire / PI-LED / NeoLink / IP54 / White (RAL 9003)
AR-MNLAIP40-01 Atrium Ronq M recessed luminaire / PI-LED / NeoLink / IP40 / White (RAL 9003)
AR-MNLAIP54-01 Atrium Ronq M recessed luminaire / PI-LED / NeoLink / IP54 / White (RAL 9003)
AR-LNLAIP40-01 Atrium Ronq L recessed luminaire / PI-LED / NeoLink / IP40 / White (RAL 9003)
AR-LNLAIP54-01 Atrium Ronq L recessed luminaire / PI-LED / NeoLink / IP54 / White (RAL 9003)
AR-SDT8IP40-01Atrium Ronq S recessed luminaire / PI-LED / DALI DT8 / IP40 / White (RAL 9003)
AR-SDT8IP54-01Atrium Ronq S recessed luminaire / PI-LED / DALI DT8 / IP54 / White (RAL 9003)
AR-MDT8IP40-01 Atrium Ronq M recessed luminaire / PI-LED / DALI DT8 / IP40 / White (RAL 9003)
AR-MDT8IP54-01 Atrium Ronq M recessed luminaire / PI-LED / DALI DT8 / IP54 / White (RAL 9003)
AR-LDT8IP40-01 Atrium Ronq L recessed luminaire / PI-LED / DALI DT8 / IP40 / White (RAL 9003)
AR-LDT8IP54-01 Atrium Ronq L recessed luminaire / PI-LED / DALI DT8 / IP54 / White (RAL 9003)
ORDER DATA
ATRIUM RONQ Recessed luminaire
Dimensions
Atrium Ronq S
☐ 150 mm
☐ 265 mm
97 m
m
☐ 200 mm ☐ 250 mm
☐ 165 mm ☐ 215 mm
107
mm
127
mm
Atrium Ronq M Atrium Ronq L
IP40
DALI
WhiteRAL 9003
ATRIUM RONQ S ATRIUM RONQ M ATRIUM RONQ L
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)S M L
1,800 910 1515 1890 0.234
2,000 1065 1780 2220 0.260
2,500 1295 2160 2700 0.324
2,700 1250 2085 2605 0.359
3,000 1200 2000 2500 0.409
3,500 1150 1915 2390 0.489
4,000 1115 1860 2325 0.562
4,500 1100 1830 2285 0.629
5,000 1085 1805 2260 0.689
5,500 1075 1790 2240 0.743
6,000 1070 1785 2230 0.791
6,500 1070 1775 2220 0.835
7,000 1065 1775 2215 0.873
8,000 1060 1770 2215 0.938
9,000 1060 1770 2215 0.991
10,000 1020 1700 2125 1.034
12,000 925 1535 1920 1.100
14,000 860 1435 1795 1.147
16,000 785 1305 1630 1.194
Luminous source LED moduleConnected load S | M | L
20 W | 25 W | 35 W
Beam angle S | M | L 75° | 82° | 80°Luminous flux S: 1,200 lm
M: 2,000 lmL: 2,500 lm
Colour temperature 1,800 K –16,000 KCRI 90Protection category IP 40 oder IP 54Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight S | M | L 1.4 kg | 1.5 kg | 1.7 kgOperating voltage 230 VACControl mode NeoLink/ZigBee
DALI DT8Protection class |IMounting Flush-mounted
Atrium Ronq
Environment friendly
Low consumption
Long service life
Tunable White
Brightnessdimmable
RGB adjustable
Excellent CRI
PI-LED LINETHE SLIM LINE FOR TARGETED ACCENTS
— Can be used in shop / retail, as an accent lamp and as indirect lighting in coves— Cooling profile made of anodized extruded aluminum including aluminum end caps— Functionality: Colour temperature 1,800 K to 16,000 K— High colour stability from micro-controller controlled LED management with temperature compensation and factory calibration— Integrated overtemperature protection with automatic dimming function— Simple installation by application of fixing plates (optional tape)— Available in different, combinable lengths
TECHNICAL DATA
47
The photometric data of a tolerance of +/- 15%, the electrical data of a tolerance of +/- 15%. Unless otherwise specified, the values are based on 3,000K and an ambient temperature of 25°C. Permissible operating temperature 10°C - 35°C. The manufacturer reserves the right to change any product specification without prior notice. CCT values outside the range 2.500-7.000K can be set in the CIE-xy mode. The coefficient alpha(smel) describes the melanopic effectiveness of the light source on humans and their circadian rhythm. To give the natural human biorhythm the best possible support, the melatonin production can be minimized by higher values of alpha(smel) throughout the day and stimulated by lower values in the evening. PI-LED enables the implementation of an illumination that is not only visually but also biologically/melanopic effective. For a standard-conforming lighting design, Lumitech recommends the document DIN SPEC 5031-100 to be taken as a basis. More documents can be found at www.kiteo.eu.Last change: 07.03.2019
* Required control on page 58 ff.
Notes
Currently available: Package „High Lumen“From July 2019 * available: Successor product: „High Lumen“ package /possible lengths up to 2.27 m
Art.No. Luminaire Art.No. Luminaire
93000101 PI-LED Line DALI white 590 mm incl. BG 93000201 PI-LED Line DALI white 590 mm incl. BG / High Lumen / LMU 2.0
93000102 PI-LED Line DALI white 1,150 mm incl. BG 93000202 PI-LED Line DALI white 1,150 mm incl. BG / High Lumen / LMU 2.0
93000103 PI-LED Line DALI white 1,710 mm incl. BG 93000203 PI-LED Line DALI white 1,710 mm incl. BG / High Lumen / LMU 2.0
93000104 PI-LED Line NeoLink white 590 mm incl. BG 93000204 PI-LED Line DALI white 2,270 mm incl. BG / High Lumen / LMU 2.0
93000105 PI-LED Line NeoLink white 1,150 mm incl. BG 93000205 PI-LED Line ZigBee 3.0 white 590 mm incl. BG / High Lumen / LMU 2.0
93000106 PI-LED Line NeoLink white 1,710 mm incl. BG 93000206 PI-LED Line ZigBee 3.0 white 1,150 mm incl. BG / High Lumen / LMU 2.0
93000207 PI-LED Line ZigBee 3.0 white 1,710 mm incl. BG / High Lumen / LMU 2.0
93000208 PI-LED Line ZigBee 3.0 white 2,270 mm incl. BG / High Lumen / LMU 2.0
From July 2019 * : Package „Light Lumen“ | extended lengths ** up to 3.39 m
Art.No. Luminaire Art.No. Luminaire
93000209 PI-LED Line DALI white 590 mm / Light Lumen / LMU 2.0 93000215 PI-LED Line ZigBee 3.0 white 590 mm / Light Lumen / LMU 2.0
93000210 PI-LED Line DALI white 1,150 mm / Light Lumen / LMU 2.0 93000216 PI-LED Line ZigBee 3.0 white 1,150 mm / Light Lumen / LMU 2.0
93000211 PI-LED Line DALI white 1,710 mm / Light Lumen / LMU 2.0 93000217 PI-LED Line ZigBee 3.0 white 1,710 mm / Light Lumen / LMU 2.0
93000212 PI-LED Line DALI white 2,270 mm / Light Lumen / LMU 2.0 93000218 PI-LED Line ZigBee 3.0 white 2,270 mm / Light Lumen / LMU 2.0
93000213 PI-LED Line DALI white 2,830 mm / Light Lumen / LMU 2.0 93000219 PI-LED Line ZigBee 3.0 white 2,830 mm / Light Lumen / LMU 2.0
93000214 PI-LED Line DALI white 3,390 mm / Light Lumen / LMU 2.0 93000220 PI-LED Line ZigBee 3.0 white 3,390 mm / Light Lumen / LMU 2.0
ORDER DATA
PI-LED LINE Linear Luminaire
Dimensions (PI-LED LMU and ECG are located outside the luminaire):
IP20
Luminous source SMD LED ModuleLenghts 590 / 1,150 / 1,710 mmConnected load 20 / 40 / 60 WBeam angle 120°Efficiency typ. 81 lm/WColour temperature 1,800 K – 16,000 KCRI >90Protection category IP 20Dimming range CCT/CIE-xy 5 – 100 %
RGB 0 – 100 %Service lifetime L80/B10 50.000hTests / approvals CE / RoHs ConformitySupply voltage 48V DCControl mode NeoLink/ZigBee
DALI DT8Protection class IIIMounting Mounting clips
PI-LED Line
NEW
CCT [K]
VISUAL DATA MELANOPICACTION FACTOR
Luminous flux [lm] alpha(smel)S M L
1,800 875 1750 2625 0.257
2,000 990 1980 2970 0.297
2,500 1295 2590 3885 0.390
2,700 1420 2840 4260 0.424
3,000 1615 3230 4845 0.474
3,500 1630 3260 4890 0.550
4,000 1580 3160 4740 0.619
4,500 1545 3090 4635 0.680
5,000 1520 3040 4560 0.735
5,500 1500 3000 4500 0.784
6,000 1490 2980 4470 0.827
6,500 1480 2960 4440 0.867
7,000 1475 2950 4425 0.902
8,000 1465 2930 4395 0.962
9,000 1460 2920 4380 1.011
10,000 1455 2910 4365 1.051
12,000 1455 2910 4365 1.113
14,000 1455 2910 4365 1.158
16,000 1455 2910 4365 1.192
* All products are designed with PI-LED LMU 2.0 and include the following features:
– Modular Dimming– Dimming range 0,1%–100%– ZigBee 3.0 including
over-the-air updates- DALI 1 certification and DALI DT8 including over-the-bus updates- LMU housing with strain relief
** An adapted lumen output allows the realization of additional luminaire lengths in this package variant.
Many more lenses as well as all products are also available as IP44 version on request.
DALI
FIXED WHITE LUMINAIRES
Environment friendly
Low consumption
Long service life
Brightnessdimmable
Excellent CRI
— Efficient use of existing sockets with halogen- or discharge lamp technology in indoor areas— High optical efficiency due to integrated anti-glare reflectors— Soft light mixing and uniform light distribution— Dimmable via trailing edge dimmer (e.g. GIRA System 2000) oder via DALI — Small construction size due to compact design— Tool-free mounting, using two fixing spring clips for 10–20 mm ceiling thickness— Glare-reducing reflector — Mounting: Flush-mounted
K-SPOT 11 F/STHE FINE DIFFERENCE
TECHNICAL DATA
51
NotesAll luminaire specifications are subject to a tolerance of +/- 15%; all electrical data is subject to a tolerance of +/-15%. Unless otherwise specified, the values are based on 3,000 K and an ambient temperature of 25°C. Permissible operating temperature 10°C to 35°C. The manufacturer reserves the right to change any product specification without prior notice. More documents can be found at www.kiteo.eu.
Last change: 07.03.2019
K-Spot Calidus, dimmable via phase section
Circuit breaker type C10 C13 C16 C20 B10 B13 B16 B20
Cable cross-section (mm²) 1.5 1.5 1.5 2.5 1.5 1.5 1.5 2.5
Number of luminaires 58 75 93 116 58 75 93 116
Art.No. Luminaire
K-DL2700F201 K-Spot recessed / 2700K / 180mA / dimmable (phase cut-off) / Flood 50° / white RAL 9003
K-DL2700F205 K-Spot recessed / 2700K / 180mA / dimmable (phase cut-off) / Flood 50° / silver
K-DL2700F301 K-Spot recessed / 2700K / 250mA / dimmable (phase cut-off) / Flood 50° / white RAL 9003
K-DL2700F305 K-Spot recessed / 2700K / 250mA / dimmable (phase cut-off) / Flood 50° / silver
K-DL2700S201 K-Spot recessed / 2700K / 180mA / dimmable (phase cut-off) / Spot 30° / white RAL 9003
K-DL2700S205 K-Spot recessed / 2700K / 180mA / dimmable (phase cut-off) / Spot 30° / silver
K-DL2700S301 K-Spot recessed / 2700K / 250mA / dimmable (phase cut-off) / Spot 30° / white RAL 9003
K-DL2700S305 K-Spot recessed / 2700K / 250mA / dimmable (phase cut-off) / Spot 30° / silver
K-DL2700F311 K-Spot recessed / 2700K / 250mA / dimmable (DALI) / Flood 50° / white RAL 9003
K-DL2700F315 K-Spot recessed / 2700K / 250mA / dimmable (DALI) / Flood 50° / silver
K-DL2700S311 K-Spot recessed / 2700K / 250mA / dimmable (DALI) / Spot 30° / white RAL 9003
K-DL2700S315 K-Spot recessed / 2700K / 250mA / dimmable (DALI) / Spot 30° / silver
Art.No. Accessory
UF-DLIP44100001 Decorative ring for K-Spot Calidus with IP44 protective glass, White
UF-DLIP44100005 Decorative ring for K-Spot Calidus with IP44 protective glass, Silver
ORDER DATA
Manufacturer Typ Max. number of spots per dimmer
GIRA System 2000 2385 00 / I00 23 Spots with 180 mA17 Spots with 250 mA
K-SPOT CALIDUS Recessed luminaire
IP20
Dimensions
Ø 85 mm
Ø 77–82 mm
100
mm
UGR<19
93 m
m
The maximum number of luminaires per automatic circuit breaker is limited due to the starting current of the luminaires. Please take note of the recommendations in the adjacent table.
K-Spot Calidus, dimmable via DALI
Circuit breaker type C10 C13 C16 C20 B10 B13 B16 B20
Cable cross-section (mm²) 1.5 1.5 2.5 4 1.5 1.5 2.5 4
Number of luminaires 40 56 64 80 21 28 35 44
Authorised Dimmer (phase section):
Silver
White(RAL 9003)
K-SPOT CALIDUS 30° K-SPOT CALIDUS 50°
Luminous source LED moduleConnected load 180 mA: 8 W
250 mA: 11 W250 mA DALI: 10,5 W
Beam angle 50° Flood | 30° SpotLuminous flux 180 mA: 570 lm
250 mA: 750 lm250 mA DALI: 750 lm
Colour temperature 2,700 KCRI > 95Protection category IP 20Dimming range 5 – 100 %
DALI: 10 – 100 %Service lifetime L70/B10 50,000hTests / approvals CE / RoHs ConformityWeight 0.5 kg incl. power supply
0.3 kg w/o power supplyOperating voltage 230 VACProtection class |IMounting Flush-mounted
excellent CRI >95
K-Spot Calidus
Environment friendly
Low consumption
Long service life
Excellent CRI
— Aesthetically pleasing designer housing with integrated wall-wash (flood) optics for Up & Down or left-right illumination
— Ideal for use as wide area wall lighting— Soft light mixing and uniform light distribution— Control: ON/OFF (dimming not possible)— Functionality: Static white light
(colour temperature 2,700 K)— Direct 230 V mains connection— Mounting: horizontal or vertical
K-MOENIADISCREET STYLISH
TECHNICAL DATA
53
NotesAll luminaire specifications are subject to a tolerance of +/- 15%; all electrical data is subject to a tolerance of +/-15%. Unless otherwise specified, the values are based on 3,000 K and an ambient temperature of 25°C. Permissible operating temperature 10°C to 35°C. The manufacturer reserves the right to change any product specification without prior notice. More documents can be found at www.kiteo.eu.
Last change: 07.03.2019
Art.No. Luminaire
K-MO30301 K-Moenia wall-mounted luminaire / Fixed White / 30° frosted optic / White (RAL 9003)
K-MO30304 K-Moenia wall-mounted luminaire / Fixed White / 30° frosted optic / Brushed aluminium
PI-LED Variant available on request.
Art.No. Accessory
K-ZMO30001 Aluminium wall spacers, 10 mm, 2 pcs.
ORDER DATA
K-MOENIA Wall-mounted luminaire
IP20
Dimensions
818 mm
95 m
m37
mm
818
mm
95 mm
Aluminiumbrushed
WhiteRAL 9003
K-MOENIA
Luminous source LED module (linear)Connected load 50 WLuminous flux 2,240 lmColour temperature 2,700 KCRI 85Protection category IP 20Service lifetime L80/B10 50,000hTests / approvals CE / RoHs ConformityWeight 2.3 kgOperating voltage 230 VACProtection class |IMounting Surface-mounted (wall)
K-Moenia 12
Environment friendly
Low consumption
Long service life
— Compact Downlight— Small construction size— Soft light mixing and uniform light distribution— Frosted safety glass— Die cast aluminium housing— Solid aluminium heat sink— Mounting: Flush-mounted
K-VIVERETHE VERSATILE LIGHTING EXPERT
TECHNICAL DATA
55
NotesAll luminaire specifications are subject to a tolerance of +/- 15%; all electrical data is subject to a tolerance of +/-15%. Unless otherwise specified, the values are based on 3,000 K and an ambient temperature of 25°C. Permissible operating temperature 10°C to 35°C. The manufacturer reserves the right to change any product specification without prior notice. More documents can be found at www.kiteo.eu.
Last change: 07.03.2019
Art.No. Luminaire
K-VE-E-FW-CM K-Vivere recessed luminaire square / Fixed White / 40° / matt chrome
K-VE-E-FW-WH K-Vivere recessed luminaire square / Fixed White / 40° / white
K-VE-R-FW-CM K-Vivere recessed luminaire round / Fixed White / 40° / matt chrome
K-VE-R-FW-WH K-Vivere recessed luminaire round / Fixed White / 40° / white
ORDER DATA
Can be flush mounted in concrete ceiling. Only suitable for connection in series. Not for use in indoor swimming pools/wellness zones (where there are chlorine vapours).
K-VIVERE Recessed luminaire
IP44III
Dimensions
K-Vivere round K-Vivere square
Ø 80 mm
Ø 92 mm
100
mm
100
mm
☐ 80 mm
☐ 91 mm
White
Matt chromium
K-VIVERE
Luminous source LED modulePower supply included (delivery)Connected load 4.5 WBeam angle 40°Luminous flux 520 lmColour temperature 3,000 KCRI 90Protection category IP 44Service lifetime L90 50.000hTests / approvals CE / RoHs ConformityWeight 0.1 kgOperating voltage 230 VACControl mode SwitchableProtection class |IIMounting Flush-mounted
K-Vivere
Environment friendly
Low consumption
Long service life
Brightnessdimmable
Excellent CRI
— Compact Downlight— Small construction size— Soft light mixing and uniform light distribution— 35° rotatable— Bayonet-lock spring-clip mounting— Mounting: Flush-mounted
K-MOTUSSMALL, SMALLER, BEST
TECHNICAL DATA
57
NotesAll luminaire specifications are subject to a tolerance of +/- 15%; all electrical data is subject to a tolerance of +/-15%. Unless otherwise specified, the values are based on 3,000 K and an ambient temperature of 25°C. Permissible operating temperature 10°C to 35°C. The manufacturer reserves the right to change any product specification without prior notice. More documents can be found at www.kiteo.eu.
Last change: 07.03.2019
Can be flush mounted in concrete ceiling. Other converters can be provided optionally. Other reflectors can be provided optionally.
Art.No. Luminaire
K-MO-L-R-FW-CM. K-Motus recessed luminaire L round / Fixed White / dimmable (phase cut-off) / matt chrome
K-MO-L-E-FW-CM. K-Motus recessed luminaire L square / Fixed White / dimmable (phase cut-off) / matt chrome
K-MO-L-R-FW-WH. K-Motus recessed luminaire L round / Fixed White / dimmable (phase cut-off) / white
K-MO-L-E-FW-WH. K-Motus recessed luminaire L square / Fixed White / dimmable (phase cut-off) / white
K-MO-M-R-FW-CM. K-Motus recessed luminaire M round / Fixed White / dimmable (phase cut-off) / matt chrome
K-MO-M-E-FW-CM. K-Motus recessed luminaire M square / Fixed White / dimmable (phase cut-off) / matt chrome
K-MO-M-R-FW-WH. K-Motus recessed luminaire M round / Fixed White / dimmable (phase cut-off) / white
K-MO-M-E-FW-WH. K-Motus recessed luminaire M square / Fixed White / dimmable (phase cut-off) / white
ORDER DATA
K-MOTUS Recessed luminaire
Dimension
IP20III
Ø 70 mm
Ø 81 mm1.1 m
m (W
hite
)2
mm
(Chr
om-M
att)
Varia
nt M
65
mm
Varia
nt L
95
mm
Ø 80 mm
2 m
m
☐ 95 mm
K-Motus round K-Motus square
Varia
nt M
65
mm
Va
riant
L 9
5 m
m
K-Motus M
K-Motus L
White
Matt chromium
K-MOTUS M K-MOTUS L
Luminous source LED modulePower supply included (delivery)Connected load M: 6.2 W
L: 9.1 WBeam angle 36°Luminous flux M: 541 lm
L: 918 lmColour temperature 3,000 KCRI 90Protection category IP 20Dimming range 5–100 %
(Phasenabschnittsdimmer)Service lifetime L70 40,000hTests / approvals CE / RoHs ConformityWeight 0.3 kgOperating voltage 230 VACControl mode switchableProtection class |IIMounting Flush-mounted
K-Motus
LIGHT MANAGEMENTHUMAN CENTRIC LIGHTING
60
SMART CONTROL OF LIGHTING WITH NEOLINK/ZIGBEE
The innovative NeoLink Air wireless control opens up a world of new possibilities for Human Centric Lighting. Installation, maintenance
and use become child‘s play and can be managed efficiently and intuitively. Subsequent integration of biorhythmic KITEO light solutions in
existing structures can be as easily implemented as installation in a completely new building.
The control data is transmitted over routes up to 100 m based on a routing process – and that too, with very little energy consumption.
Thanks to a broad range of control elements, there is also a matching light control interface for every construction situation and every user. In
addition to wall rotary knobs and NeoLink Air App for smartphones and tablets, a USB stick with myPI-LED software for controlling manually
or fully automatic via PCs and laptops is also available.
NeoLinkK-ZWALLY
PC APP myPI-LED viaNeoLink USB Stick
Android/iOS APP myPI-LED viaNeoLink Box
Functions
Manual control modes(Brightness & Colour, On-Off) ✓ ✓ ✓
CIE-xy expert mode ✓
Network: Building and reset ✓ ✓ ✓
Save and recall lighting scenes ✓ ✓
Launch daylight circle/sequence ✓ ✓ ✓
Configurate daylight circle/sequence ✓
Groups: Building and control ✓ ✓
The K-ZWALLY can be integrated into a higher-ranking NeoLink network, that has been built by the NeoLink USB Stick or the NeoLink Box, and can then be assigned to a lighting group.
61
COMPLEX LIGHTING SYSTEMSEASY CONTROL WITH DALI DT8
As an alternative to NeoLink Air, there is an option of integrating Human Centric Lighting solutions of KITEO via DALI DT8.Modern biorhythmic light can be integrated easily and quickly, therefore, even in more complex building management systems.All the functions of a lighting system, such as changing the brightness, colour temperatures, and additional RGB sequences as well as daytime sequences, can be controlled with DALI DT8; generally or specifically. Thus, the user can set the perfect lighting at any time and for every occasion within seconds. Various components, sorted by application, are available for control and operation – fully automatically in the background, or by manual control on the wall or on the PC.
CDC module PC APP myPI-LED and DALI USB StickDALI Touchpanel DALI Display
Functions
Manual control modes(Brightness & Colour, On-Off) ✓ ✓ ✓
CIE-xy expert mode ✓
Adressing/grouping ✓ ✓
Save and recall lighting scenes ✓ ✓
Launch daylight circle/sequence ✓ ✓ ✓
Configurate daylight circle/sequence ✓ ✓
Control groups ✓ ✓ ✓
DALI BASIC: Introductory model
PELN
DALI BUS
DALI Fixture(s)
DALI Fixture(s)
DALI Fixture(s)
DALI PS Power Supply for DALI BUS
DALICDC module
DALItouchpanel
The DALI CDC module generates the daytime sequence in the background – for manual interventions, the optional DALI touch panel can be added.
PC APP myPI-LEDand USB Stick
DALI ADVANCED: Advanced control mode
Daytime sequences and mood lights can be called and played on the PC and manual adjustments can be made. The DALI touch panel can be added as a wall-operating panel.
DALIDisplay 7"
The DALI display can be programmed at will and offers the complete range of controls. The DALI touch panel can be added for simple actions.
DALI EXPERT: The allrounder
The DALI Touchpanel can also be combined to DALI ADVANCED or DALI EXPERT applications as an additional control panel.
DALI
62 Last change: 07.03.2019
Art.No. NeoLink Wheel Control
K-ZWALLY-1.1 NeoLink Wheel Control, standard course of daylight, UTC
K-ZWALLY-2.1 NeoLink Wheel Control, seasonal course of daylight, UTC
K-ZWALLY-3.1 NeoLink Wheel Control, standard course of daylight, UTC+1
K-ZWALLY-4.1 NeoLink Wheel Control, seasonal course of daylight, UTC+1
Art.No. Accessory
K-Z1000051 Central plate with rotary knob, JUNG A500 series, A1540 WW, alpine white
K-Z1000050 Frame one-fold, JUNG AS500 series, AS581 WW, alpine white
K-Z1000052 Frame two-fold, JUNG AS500 series, AS582 WW, alpine white
K-ZWALLY NeoLink wall control panel for NeoLink/ZigBee luminaires
ORDER DATA
— Luminaires can be switched on and off (power switch is
recommended)
— Brightness can be adjusted steplessly (5 – 100 % for colour
temperatures and CIE-xy colours)
— Colour temperature can be adjusted steplessly,
from 1,800 K up to 16,000 K with transition to red range
— Stepless RGB sequence
— For luminaires with direct and indirect light portion, each light
portion can be controlled separately from the other –
both in brightness mode and colour mode.
— Automatic daytime sequence (standard sequence
or seasonal sequence)
— Installing a NeoLink network (automatic registration
of NeoLink luminaires in the network)
— Resetting an installed NeoLink network (automatic deregistra-
tion of NeoLink luminaires from the network)
— Integration in a higher-ranking NeoLink network (starting from
a NeoLink Box or a NeoLink USB Stick) is possible
— Flush mounted in conventional wall sockets with a minimum
depth of 61 mm
TECHNICAL DATAOperation Endless control potentiometer with push buttonOperating voltage 100 V – 240 VACFrequency range 50/60 HzPower consumption 0.3 WHousing colour BlackConnection / Installation
platinum terminal / flush-mounted in wall socket in accordance with DIN 49073 with a minimum depth of 61 mm
Pin diameter 4 mm (compatible with popular switch progams* – contries on request); including adapter sleeve for 6 mm shaft diameterTests / approvals CE / RoHs ConformityOther Installation and operating instructions are included at the time of delivery; the cover frame is not included (optional accessory)
63Last change: 07.03.2019
myPI-LED mobile
IP20
Art.No. NeoLink Air control device
LTP-1026 NeoLink Air Box
ORDER DATA
With myPI-LED NeoLink/ZigBee luminaires can be easily configured and controlled via smart-phone, iPhone, tablet or iPad.
— Design and configuration of a network consisting of up to 200
NeoLink/ZigBee luminaires
— Fully automatic sequences are already stored in the NeoLink
Box and are called via the myPI-LED App:
– Standard daylight course
– Saisonal daylight course
– Colour sequence (CCT and RGB sweeps)
— Versatile manual intervention options:
– Change of brightness, CCT or RGB colour
– Save and recall up to 16 light scenes
— Up to 30 Z-WALLYs can be integrated into the network
— Energy savings thanks to automatic power release of NeoLink
luminaires in the network
TECHNICAL DATA NeoLink Box
Supply voltage 100V-240V AC
Current draw max. 0.1 A
Frequency range 50/60 Hz
Interface 1
2
Connecting option for NeoLink luminaires (power release via internal relay) with max. output current of 5A (maximum valid power rating 1,000 W)
1 1 x Ethernet for connection to WLAN router
Output signal NeoLink / ZigBee
Standards EN 55015 (EMV-stability requirements)EN 300328 (radio testing)EN 60950 (product safety)
Protection class / Pro-tection category
II (insulated, without protective conductor terminal) / IP20
Ambient temperature +10°C – +45°C (during operation)
Abmessungen L x B x H 150 mm x 80 mm x 60 mm
(Required) Accessoires – WLAN router with RJ45 cable (both not included in delivery); optional: Integration of the NeoLink Box into an existing network– Mating connector 100V-240V AC including strain relief (included in
delivery)– Optional: K-ZWALLY(s) (can be combined with the NeoLink Box)
The myPI-LED App is available as „myPI-LED“ for free in the Playstore/Appstore and runs on the following operating systems: Android 4.0.3 and higher / iOS 7 and higher
64 Last change: 07.03.2019
myPI-LED for PC
Art.No. NeoLink/ZigBee control device
K-Z1001014 NeoLink/ZigBee USB, for controlling KITEO NeoLink/ZigBee luminaires over PC
Art.No. DALI control device
K-WDALI-USB wDALI USB
Art.No. Package
K-Z1001018-S 1 x NeoLink Air camera system with USB
ORDER DATA
With myPI-LED and a USB stick (DALI or Neo-Link/ZigBee), every lighting system becomes a well-rounded experience - fully automatic or interactive.
— Easy initial operation/installation on every Windows PC
— Communication between USB Stick and luminaires via NeoLin/
ZigBee or DALI
— Automatic network configuration (NeoLink/ZigBee) or automatic
commissioning (DALI)
— Configuration of luminaire groups, brightness- and colour control
of the groups
— Programming and calling various mood lights, daylight sequences
and dynamic sequences
— In case of NeoLink/ZigBee-installation: Integration of up to thirty
K-ZWALLY into the network of the stick possible
— Download myPI-LED App for PC: www.kiteo.eu
TECHNICAL DATA
+optional
myPI-LED gives the possibility of a lighting control, that can react in
a fast and personalized way to various requirements:
— The product or room is photographed
— myPI-LED calculates the optimal white light for the object
— The connected PI-LED luminaires automatically set the calculated
light colour
USB Stick NeoLink/ZigBee
Electric supply directly via PC USB Port
Installation easy connection to PC
Output signal NeoLink / ZigBee
DimensionsL x W x H
80 mm x 21 mm x 12.3 mm
USB Stick DALI + interace module DALI
Electric supply StickModule
directly via PC USB Porvia DALI Bus
Installation StickModule
easy connection to PCBox
Output signal StickModule
Radio 2.4 Ghz / up to 300 mDALI
DimensionsL x W x H
Module: 59 mm x 32 mm x 15 mm
DALI
65Last change: 07.03.2019
optional
DALI CDC and DALI SEQUENCERTwo small modules that have it all: The DALI CDC transmits the natural course of sunlight to a whole light installation, while the DALI SEQUENCER shows off with special colour effects.
DALI CDC
— Implementation of daytime sequences that can be
programmed at will
— The stored daytime sequence can be transmitted to the
broadcast address (all luminaires), to luminaire groups or
to individual addresses
DALI SEQUENCER
— Implementation of up to four automatically running brightness
and colour sequences
— Calling the various sequences, e.g. via the DALI touch panel
— The stored sequences can be transmitted to the broadcast
address (all luminaires) or to luminaire groups
APPLIES FOR BOTH
— Easy connection to DALI circuit
— Multiple modules per DALI circuit are possible
DALI CDC DALI SEQUENCERElectric Supply via DALI-Bus via DALI-Bus
Current consumption 5 mA 2 mA
Input and output signal DALI DALI
DALI Standard IEC 62386 (incl. Device Type 8) IEC 62386 (incl. Device Type 8)
Daytime sequence RTC time module integrated, Daytime sequence programmable at will
Up to any 4 sequences programmable
Protection class IP 20 IP 20
Dimensions L x W x H 33 mm x 15 mm x 59 mm 28 mm x 15 mm x 40 mm
TECHNICAL DATA
Art.No. Module
K-DALI-CDC DALI CDC
K-DALI-SEQ DALI Sequencer
ORDER DATA
IP20DALI
Art.No. Interface module
K-DALI-PS DALI PS2 (ceiling installation)
K-DALI-PS2 DALI PS2 (ceiling installation)
ORDER DATA
DALI PS— Voltage supply for the DALI circuit (one pc. per circuit)
— Installation instructions for low voltage (DALI is not SELV)
TECHNICAL DATA
Dimensions PS
Length 98 mmWidth 17 mmHeight 56 mm
Dimensions PS2
Length 120 mmWidth 33 mmHeight 22 mm
IP20DALI
Supply from 230 VAC mains voltage
Voltage frequency 50 Hz
Nominal powerPS / PS2
4 W / 4 W
Output DALI
Maximum input current PS / PS2
250 mA / 220 mA
Temperature -20°C up to +55°C
Protection class IP 20
Connection lead cross-section
max. 2.5 m²
Mounting PS / PS2 of top hat rail / ceiling void
DALI
DALI
66 Last change: 07.03.2019
Art.No. Control device
LTP-1028 DALI Touchpanel DT8
ORDER DATA
TECHNICAL DATA
DALI TOUCHPANELControl device for DALI luminaires
— Wall operating panel for DALI luminaires with colour control
according to DALI Standard Device Type 8
— Brightness, colour temperature and RGB colour control
— Calling mood lights (precondition: luminaires have stored
light moods)
— In combination with DALI Display 7‘‘ or with the DALI CDC or DALI
Sequencer module, daytime sequences or sequences stored in the
display can be called via the touch panel
— Broadcast control (all luminaires) or group-wise control (up to two
groups; luminaires must be grouped in advance)
— The control buttons on the DALI Touchpanel can be equipped
with other functions/features on request and the labelling fields
can be adjusted accordingly
— Multiple touch panels per DALI circuit can be used as well
Dimensions
Length 82 mmHeight 111 mm
Colours | Designs
WhiteRAL 9010
IP20DALI
Electric supply via DALI-BusCurrent consumption 4 mAInput/output signal DALIDALI Standard IEC 62386 (incl. Device Type 8)
Identification plate Standard identification plate as shown in the figureFeatures Customisable features, programmable as defined
by userProtection class IP 20Temperature 0°C – 50°CHousing material ABS
DALI
67Last change: 07.03.2019
Art.No. Control device
LTP-1029 DALI Dislpay DT8
DALI DISPLAY 7" DT8
Commissioning tool and light control unit for two DALI circuits
ORDER DATA
— Commissioning tool for up to 2 DALI circuits:
– Configuration of up to 16 groups, up to 16 scenes (bright-
ness and/or CCT or RGB), daytime sequences and stored
sequences
– Creation of weekly plans/assignment of sequences
to week days
— Light control unit for up to two DALI circuits:
– Calling up to 16 scenes
– Calling daytime sequences, stored sequences and
weekly plans
– One fixed daytime sequence is stored by default
— The DALI Display can be programmed with customised screens
including desired features on request
— If the DALI Display is used in combination with the DALI touchpanel,
then daytime sequences or sequences stored in the display
can be called via the touch panel
TECHNICAL DATAIP20DALI
Dimensions
Length 200 mmWidth 20 mmHeight 150 mm
* For DALI bus supply, one pc. K-DALI-PS or one pc. K-DALI-PS2 must be used in addition.Notes
Electric supply 36 V, included in the scope of deliveryInterfaces 2 x DALI, 1 x USB, 1 x EthernetOutput signal DALI (two DALI circuits possible)DALI Standard IEC 62386 (incl. Device Type 8)Display screen 7" touch screen with 24 Bit colour depthBackground lighting RGB LEDsScreens Customised screens with desired programmable
featuresSoftware updates via Ethernet or USBProtection class IP 20
DALI
CONTROL AND OPERATIONFIXED WHITE
CONTROL MODE AND OPERATIONTHE BEST FOR GOOD REASON
71Last change: 07.03.2019
ORDER DATA AND TECHNICAL DATAControl and Operation
K-Z1000079-0Universal touch dimmerGIRA System 2000
K-Z1000079-1
Cover for universal touch dimmeralpine whiteGIRA System 2000
K-Z1000054
Rocker switch 10AX250VAC506U
K-Z1000053
Rocker central plate for rocker switchJUNG AS500 seriesAS591 WWalpine white
K-Z1000050
Frame one-foldJUNG AS500 seriesAS581 WWalpine white
K-Z1000052
Frame two-foldJUNG AS500 seriesAS582 WWalpine white
Art.No.
TECHNICALINFORMATION
74Studie: The effect of high correlated colour temperature office lighting on employee wellbeing and work performance
© 2007 Mills et al; licensee BioMed Central Ltd. Peter R Mills, Susannah C Tomkins und Luc JM Schlangen
HUMAN CENTRIC LIGHTINGMAKES THE DAY LIGHT
Study: The effect of high correlated colour temperature office lighting on employee wellbeing and work performance © 2007 Mills et al; licensee BioMed Central Ltd. Peter R Mills, Susannah C Tomkins und Luc JM Schlangen
Stable healtheven in stressful
times
+27 %Improved
Concentration
+37 %+19 %Percptible increase in
performance
+28 %Greater vitality
throughout the day
7 a.m., summer
10 a.m., summer
12 a.m., summer2 p.m., winter
4 p.m., autumn
4:30 p.m., winter
7:15 a.m., spring 3:30 p.m., autumn 7 p.m., summer
9 a.m., spring
8 a.m., autumn
2 p.m., summer
75
Light has a perceptible effect on a human being‘s vitality and health.
Sunlight is essential for health and well-being. Every artificial ligh-
ting solution must simulate, therefore, the characteristics of sun-
light as far as possible. KITEO takes up and meets this challen-
ge with Human Centric Lighting in trend-setting and innovative
luminaires and lighting concepts. Natural daylight is simulated,
taking into account its spectral quality and constant change in
colour temperature, which has a perceptibly positive effect on
the human being‘s circadian rhythm or „inner clock“. This results
in a sense of well-being and an improved ability to concentrate.
The more that artificial lighting resembles natural sunlight, the grea-
ter is our perception of its comfort level and quality. Human Centric
Lighting solutions realistically simulate the spectrum of sunlight
with its variations in the natural course of the day, without emitting
undesired UV or infrared radiation. This extraordinary light quality
cannot be achieved with conventional lighting concepts. Hence, in
KITEO lighting solutions, we only make use of the award-winning
cutting edge technology PI-LED.
Spectrum of sunlightcloudy, 10 a.m.
Spectrum of a standardoffice light with T5fluorescent lamps
Spectrum of a KITEO Human Centric Lighting solutionSummer day as reference
SPECTRAL RANGE IN COMPARISON*
* All recordings were taken with a KITEO spectroscope
12 p.m.Midnight
2 a.m.Deep sleep
4:30 a.m.Lowestbody temperature
6:45 a.m.Morning surge in blood pressure
7:30 a.m.Melatonin production stops
10 a.m.High level ofattentiveness
12 a.m.Noon
2:30 p.m.Best coordination
3:30 p.m.Quickest reactions
5:45 p.m.Effective blood circulation,
strongest muscle power
6:30 p.m.Highest blood pressure
7 p.m.Highest body temperature
9 p.m.Start of melatonin
production
76
The pleasant simulation of the natural circadian daylight sequence is
one of the core competencies of PI-LED technology. A lighting solution
that is optimally adapted to the human being‘s circadian rhythm is
biologically effective for our day-to-day activities and boosts health
and well-being. PI-LED offers the user the right light for every time of
the day – automatically. All standard PI-LED systems are equipped
with a preset seasonal daylight variation sequence. However, the
user has the option to intervene manually and adjust the light to
their current needs.
Fireside or twilight: PI-LED transforms each space into an oasis of
light. In addition to simulating the natural daylight sequence, PI-LED
is able to generate numerous mood lights with accents. By varying
the light colours, one can vary the appearance and effect of spaces
in a biologically effective way and thus adapt to new situations and
occasions in a flexible way: Strong colours, for instance, make the
next party an unforgettable event; cooler colours create a harmo-
nious ambience; and warm, orange-red coloured light is especially
conducive to relaxing.
Light in the cours of the day RGB colour range
DAYLIGHT:
INDOORS AS WELL AS OUTDOORS LIGHT FOR EVERY MOOD
BE CLOSE TO THE SUN WITH PI-LED
With PI-LED, highly sophisticated Human Centric Lighting solutions are possible, because the patented and well-tested technology combines tuneable white light and RGB colours in one light source. Thus, PI-LED is able to simulate exactly sunlight in terms of its spectral quality and constant change in colour temperature according to the time of day: From dawn through daylight blue to sunset.
77
Mint
Red
Blue
PlanckianCurve
PI-LED IN DETAIL
— Colour temperature can be automatically regulated along the Planckian curve to simulate the natural daytime sequence (with seasonal and non-seasonal variations)
— Colour temperature 1,800 K - 16,000 K
— Custom control of all the RGB colours within the PI-LED
colour space
— Wide spectrum with colour rendition CRI ≥90
— Constantly high energy efficiency from warm white to cold white
— 100 % calibration and temperature compensated for smallest colour tolerances (MacAdams 1 typ./initial)
OPTICAL CHARACTERISTICS OF PI-LED
rel.
inte
nsity
Wave length (nm)
CR
I
Colour temperature (K)
Colour temperature (K)
rel.
lum
inou
s flu
x (%
)
Farbtemperatur (K)
rel.
pow
er c
onsu
mpt
ion
(%)
78
LINEAR LUMINAIRES
KITEO WARRANTY
In addition, KITEO offers a modular and highly flexible product portfolio for indoor linear lighting functions: From easily and quickly instal-
lable plug & play complete systems right up to custom-made components for customised solutions. The optics and mechanics of all the
components are perfectly attuned to each other and allow for a variety of combination options.
KITEO stands for innovation, outstanding design and highest quality – not just today, but also in the future. For this reason, KITEO offers
an extended manufacturer‘s warranty of five years on all KITEO products within a registered project. For more information with regard to
registration and warranty conditions, please contact your KITEO Project Consultant. www.kiteo.eu
KITEO GmbH & Co. KG
Landsberger Str. 310
80687 Munich
GERMANY
Tel +49 89 990 160 0
Fax +49 89 990 160 222
Sales Austria
LUMITECH Produktion
und Entwicklung GmbH
Technologiepark 10
8380 Jennersdorf
AUSTRIA
Tel +43 1 907 24 10 0
Fax +43 1 907 24 10 222
Sales Switzerland
LUMITECH
Schweiz GmbH
Baslerstraße 30
8048 Zurich
SWITZERLAND
Tel +43 3329 90900 42
Fax +43 1 907 24 10 222
Data from this catalogue may neither be reproduced nor published
(in print, as photocopy, digital scans or in any other way) without
prior written permission from KITEO. All data in this catalogue has
been provided merely for the purpose of information.
Kiteo GmbH and Kiteo GmbH & Co. KG reserve the right to change
these data at any time without prior notice and without justification.
Kiteo GmbH and Kiteo GmbH & Co. KG assume no liability for any
errors or misprints.
All dimensions must be verified in natural conditions. We assume
no liability for colour deviations. Some of the products illustrated in
the brochure are image touch-ups and merely serve to represent
the use options.
We deliver only according to our terms and conditions of sale and
purchase, which are known to you. The product remains our property
until complete payment. Our General Terms and Conditions shall apply
to all business transactions, they can be called from www.kiteo.eu.
Complete Catalogue 2019
Subject to technical changes, errors and misprints.
Art. No.: PR-KAT-2019-EN-V1
© 2019 KITEO
www.kiteo.eu