comparativo segmento 4 e 5
TRANSCRIPT
-
7/22/2019 Comparativo Segmento 4 e 5
1/107
Segment 4/5
Product Resource Guide
Student:
RICOH FAMILY GROUP COMPANIES
-
7/22/2019 Comparativo Segmento 4 e 5
2/107
Table of Contents
Table of Contents......................................................................................................................2PRODUCT CODE LEGEND & LAUNCH DATES.......................................................................1
Model Comparisons..................................................................................................................3
WHATS NEW AND DIFFERENT B140 VS. B064...................................................................3WHATS NEW AND DIFFERENT B246 vs. B140....................................................................5WHATS NEW AND DIFFERENT D052 vs. B246....................................................................6WHATS NEW AND DIFFERENT D062 vs. D052....................................................................7
SEGMENT 4/5 ENVIRONMENTS...............................................................................................9GENERAL OFFICE/LARGE WORKGROUP ...........................................................................9CENTRALIZED REPRODUCTION DEPARTMENT/IN-PLANT .............................................10Data Centers.........................................................................................................................11
SERIES FEATURES ................................................................................................................13TECHNOLOGY HIGHLIGHTS...............................................................................................14
Next Generation Technology .............................................................................................14Main Unit Controller...........................................................................................................14IPv6 Support......................................................................................................................15Open Architecture..............................................................................................................16RiSVP Partner Program.....................................................................................................16
COPY FEATURES................................................................................................................17Connect Copy/Connect Print Option..................................................................................21Document Feeder 1:1 Output Speed .................................................................................22One-Pass Duplex Scanner ................................................................................................22Exceptionally Fast Warm-Up Time.....................................................................................23Document Division.............................................................................................................23Document Server...............................................................................................................23
FINISHING OPTIONS...........................................................................................................26Z-Folding Option................................................................................................................29Multi-fold Option ................................................................................................................29
FAX FEATURES ...................................................................................................................31LAN-Fax ............................................................................................................................32Internet Fax (T.37).............................................................................................................33IP Fax (T.38)......................................................................................................................33
Advanced Fax Functionality...............................................................................................33PRINTING FEATURES .........................................................................................................35
Refined Print Command Stream (RPCS)...........................................................................36Capabilities Only Available with RPCS ..............................................................................37Unauthorized Copy Control................................................................................................38Hold Print...........................................................................................................................39Stored Print........................................................................................................................40Stored Print (Shared).........................................................................................................41Store and Print...................................................................................................................41Store and Print (Shared)....................................................................................................42Connectivity.......................................................................................................................43
-
7/22/2019 Comparativo Segmento 4 e 5
3/107
Printer-only Version Throughput Features .........................................................................45Network Printing Capabilities.............................................................................................48PDF Direct Print.................................................................................................................52Printer Driver Feature Matrix..............................................................................................53
SCANNING FEATURES .......................................................................................................55Network Scanning Capabilties ...........................................................................................56Scan to URL ......................................................................................................................57Scan to Novell (NCP).........................................................................................................57Ricoh GlobalScan Solution ................................................................................................58Ricoh DesktopBinder Personal Document Management Software Solution.......................61
RICOH DOCUMENT SOLUTIONS........................................................................................63Host Printing Defined.........................................................................................................63Ricoh Output Management Solution 400 (OMS400) AS/400 Printing Solution...................65Document Output Technology (DOT) Enterprise................................................................66Document Output Technology (DOT) Office ......................................................................67Ricoh eCabinet Archival Solution.......................................................................................68Ricoh DocumentMall Web-Based Storage Solution ...........................................................68Reform PDC......................................................................................................................69Dataworks3 ........................................................................................................................70eCopy ShareScan Suite ..............................................................................................72Equitrac Print Security And Cost Recovery Solution ..........................................................73
SECURITY FEATURES........................................................................................................75Authentication....................................................................................................................75User Code Authentication..................................................................................................75Basic Authentication ..........................................................................................................76Windows Authentication.....................................................................................................77LDAP Authentication..........................................................................................................77DataOverwriteSecurity System (DOSS) and Removable Hard Drive (RHD) Option...........79Other Security Features.....................................................................................................80PDF Encryption .................................................................................................................80Locked Print.......................................................................................................................80Stored Print........................................................................................................................81Unauthorized Copy Control................................................................................................81Restriction on Destinations (Scan to E-mail)......................................................................81Encryption..........................................................................................................................81
RICOH UTILITIES .................................................................................................................83@Remote ..........................................................................................................................83Web Image Monitor ...........................................................................................................87SmartDeviceMonitor ..........................................................................................................89E-Mail Notification..............................................................................................................91Web Based Driver Installer (WBDI)....................................................................................93Universal Print Driver.........................................................................................................93
Appendix A B140 AC/DC Power Distribution.....................................................................951. POINT-TO-POINT DESCRIPTION....................................................................................952. B140 SERIES UNIQUE PRE-MAINFRAME POWER-UP................................................953. B064 SERIES POWER-UP SEQUENCE (B140 SERIES MAINFRAME) ...........................974. ENERGY SAVER & ENERGY STAR.................................................................................99QUESTIONS FOR BLENDED LEARNING PART II ..........................................................101
-
7/22/2019 Comparativo Segmento 4 e 5
4/107
Segment 4/5 Product Resource Guide
1
PRODUCT CODE LEGEND & LAUNCH DATES
Product Code RFG Company
Launched in Gestetner Lanier Ricoh Savin
June 2009
D062MP 6001 /
MP6001 SPLD360 / LD360sp Aficio MP 6001 /
MP 6001 SP9060 / 9060sp
B063MP7001 /
MP7001SPLD370 / LD370sp Aficio MP 7001 /
MP 7001 SP9070 / 9070sp
D065MP8001 /
MP8001SPLD380 / LD380sp Aficio MP 8001 /
MP 8001 SP9080 / 9080sp
D066MP9001 /
MP9001SPLD390 / LD390sp Aficio MP 9001 /
MP 9001 SP9090 / 9090sp
April 2008
D052MP6000 / 6000SP LD260 / 260sp MP6000 /
6000SP
8060 / 8060sp
D053MP7000 / 7000SP LD270 / 270sp MP7000 /
7000SP8070 / 8070sp
D054MP8000 / 8000SP LD280 / 280sp MP8000 /
8000SP8080 / 8080sp
July 2006
B246 DSm755 LD255 Aficio MP5500 8055
B248 DSm765 LD265 Aficio MP6500 8065
B249 DSm775 LD275 Aficio MP7500 8075
B250 DSm755sp LD255spAficio MP5500
SP
8055sp
B252 DSm765sp LD265spAficio MP6500
SP8065sp
B253 DSm775sp LD275spAficio MP7500
SP8075sp
G148 (9/2006) P7675 LP275hdn SP 9100DN MLP175n
November2004
B140 DSm660 LD160 Aficio 2060 4060
B141 DSm675 LD175 Aficio 2075 4075
B142 DSm660 SP LD160 SP Aficio 2060 SP 4060 SP
B143 DSm675 SP LD175 SP Aficio 2075 SP 4075 SP
B163 DSm651 LD151 Aficio 2051 4051
B228 DSm651 SP LD151 SP Aficio 2051 SP 4051 SP
G126 (5/2005) P7575 LP175hdn AP900 MLP75n
-
7/22/2019 Comparativo Segmento 4 e 5
5/107
Segment 4/5 Product Resource Guide
2
Product Code RFG Company
Launched in Gestetner Lanier Ricoh Savin
July 2002
B064 6002 LD060 Aficio 1060 2560
B065 7502 LD075 Aficio 1075 2575
B098 (10/2002) 5502 LD055 Aficio 1055 2555
May 2000
A292 3355 5455 Aficio 551 2055DP
A293 3370 5470 Aficio 700 2070DP
1998/1999
A229 (65 CPM) 3265 Aficio 650 9965DPA229 (55 CPM) 3255 Aficio 550 9955DP
-
7/22/2019 Comparativo Segmento 4 e 5
6/107
Segment 4/5 Product Resource Guide
3
Model Comparisons
WHATS NEW AND DIFFERENT B140 VS. B064
Ricoh has made a number of enhancements to the functionality of the B163/B140/B141 versus
the B098/B064/B065. The following tables provide a complete comparison and are broken outas follows:
Whats New Print CapabilitiesGeneral Capabilities Scan Capabilities
Paper Handling Capabilities Security Features
Whats New?Next Generation
ArchitectureHigher Copy/Print Resolution Interposer
CapabilityOne Pass Duplex
Document FeederGreater Standard/Optional
Memory DesktopBinder
Advanced SecurityFeatures
Scanning Capability SmartDeviceMonitor
Faster Warm-Up Time Enhanced Finishing Options Web Image Monitor
General Capabilities- Whats Different?
Feature B140/B141/B163 B064/B065B098
Copy/Print Speed 60/75/51 PPM 60/75/55 PPM
Copy/Print Resolution 1200x1200 dpi 600x600 dpi
Standard Memory 128MB 48MB
HDD 40GB 20GB
Warm Up Time 30 seconds 330 secondsStandard Paper Supply 4,300 Sheets 4,250 Sheets
Maximum Paper Supply 8,300 Sheets 7,750 Sheets
OPC Drum Yield 700K 360K
PM Cycle 300K 150K
Embedded SoftwareArchitecture
Yes- Optional Device SDK N/A
Paper Handling Capabilities- Whats Different?
Feature B140/B141/B163 B064/B065B098
Optional LCT 4,000 Sheets 3,500 Sheets100-Sheet DocumentFeeder
One Pass Duplex ScanningSingle Side Scanning(Reversing Feeder)
Interposer Optional with all Finishers N/A
50-Sheet Multi-PositionFinisher
Optional SR850 Finisher Optional SR870 Finisher
100-Sheet Multi-PositionFinisher
Optional SR841 Finisher N/A
-
7/22/2019 Comparativo Segmento 4 e 5
7/107
Segment 4/5 Product Resource Guide
4
Saddle-Stitch Finisher Optional SR861 Finisher N/A
Z-Fold Optional with SR861 Finisher N/A
9-Bin Mailbox Optional with SR850/SR861 N/A
Tabs Optional, via Tray 2 or 3 N/A
Print Capabilities- Whats Different?
Feature B140/B141/B163 B064/B065B098
Printing CapabilityOptional With Scan/Print Kit or
Standard on SP ModelOptional with Print
ControllerRPCS Driver (Single ClickPrinting)
Standard N/A
PDF Direct Print Comes with PS3 Option N/A
IEEE 802.11b Wireless LANInterface
Optional N/A
IEEE 1394 Interface Optional N/A
USB 2.0 Interface Optional N/ABluetooth Interface Optional N/A
Scan Capabilities- Whats Different?
Feature B140/B141/B163 B064/B065B098
Scanning CapabilityOptional With Scan/Print Kit or
Standard on SP ModelN/A
Scanning Speed (toemail/folder)
75 spm N/A
Scan Resolution Up to 600 dpi N/A
Embedded Scan to
email/folderYes N/A
LDAP support Yes N/A
Network TWAIN Scanning Yes N/A
Scan Capabilities- Whats Different?
Feature B140/B141/B163 B064/B065B098
Restrict Access to Device
4-Levels of UserAuthentication:
Windows/LDAP/Basic/UserCode
User Codes
Protect Data
DOSS, RHD, Encryption via
SSL N/A
-
7/22/2019 Comparativo Segmento 4 e 5
8/107
Segment 4/5 Product Resource Guide
5
WHATS NEW AND DIFFERENT B246 vs. B140
Feature B246 B140
CPM 55/65/75cpm 51/60/75cpm
Resolution 1,200dpi 1,200dpiHDD 80GB 40GB
Operational Panel Large WVGA VGA
Preview/ThumbnailDisplay
Yes No
Duty 300K 300K
Life 9,000K 9,000K
MCBC 75K 75K
Drum Yield 1,200K 700K
Warm up Time 30 seconds 30 seconds
Recovery time from Offmode 30 seconds 30 seconds
Recovery time from Lowpower mode
10seconds 10seconds
Dual sided scanning Yes Yes
Paper capacity (Standard) 4,300 sheets 4,300 sheets
Paper capacity(Maximum)
8,300 sheets 8,300 sheets
Z-folding Yes Yes
Booklet Making Yes Yes
Cover Interposer Yes Yes
9 bin Mailbox Yes YesFirst Copy Time (seconds) 4.2/3.5/3.5 4.2/4.2/3.5
Scan to E-mail Yes Yes
Scan to Folder Yes Yes
Scan to NCP Yes No
Scan to URL Yes No
LDAP Yes Yes
IP v6 Printing Yes No
PDF Direct Print Yes Yes
Web Image Monitor Yes Yes
Embedded @Remote Yes No
Windows Authentication Yes Yes
DOS Unit Yes Yes
Unauthorized CopyControl
Yes No
Auto/On-demand E-mailNotification
Yes No
Shortcut Keys (Copy) Yes (6) Yes (5)
-
7/22/2019 Comparativo Segmento 4 e 5
9/107
Segment 4/5 Product Resource Guide
6
Chapters (Copy/Print) Yes (100) Yes (20)
Step by step touch paneljam removal Instructions
Yes No
Fax Option Yes No
WHATS NEW AND DIFFERENT D052 vs. B246
The differences between the D052 series and the B246 series were very minor.
Feature D052 B246
CPM 60/70/80cpm 55/65/75cpm
-
7/22/2019 Comparativo Segmento 4 e 5
10/107
Segment 4/5 Product Resource Guide
7
WHATS NEW AND DIFFERENT D062 vs. D052
Feature D062/D063/D065/D066 D052/D053/D054
Output Speed 60/70/80/90 ppm 60/70/80-ppmFull Color LCD Panel Yes NoFinishing Capabilities
Folding In-Line Multi-Folding (6Types)
Z-Fold only
3,000-Sheet 100-SheetStapling
SR4050 SR842
2,000-Sheet - 50-SheetStapling
SR4040 SR4000
and 15-Sheet Saddle-Stitch
3,000-Sheet 50-Sheet Staple SR4030 SR970Scanning Capabilities
Full Color Scanning Yes No
ARDF Capacity 150-Sheets 100-Sheets
Enhanced TWAIN Scan ReadAhead Mode
Yes No
WSD Scanning Yes No
Single Page HighCompression PDF
Yes No
Multi-Page High CompressionPDF
Yes No
Drop Out Color Send Yes No
Scan-to-USB/SD Card Yes No
Printing CapabilitiesMail to Print Yes No
WSD Printing Yes No
Wireless Interface Support IEEE 802.11a/b/g IEEE 802.11b
Classification Code Yes No
Print/Scan Maximum Memory 1.5 GB 512 MB
Printer CPU Intel Celeron 1.0 GHz Intel Celeron 8.66 MHz
Hard Disk Capacity 160 GB 80 GBFacsimile Capabilities
Facsimile Type Type 9001 Type 9000
Double Check Destination
Address
Yes No
Detection of MisplacedDocuments
Yes No
Security Capabilities
Kerberos Authentication Yes No
S/MIME Yes No
IPSec Communication Yes No
HDD Encryption Yes No
-
7/22/2019 Comparativo Segmento 4 e 5
11/107
Segment 4/5 Product Resource Guide
8
Feature D062/D063/D065/D066 D052/D053/D054
Locked Print PasswordEncryption
Yes No
802.11x WirelessAuthentication
Yes No
-
7/22/2019 Comparativo Segmento 4 e 5
12/107
Segment 4/5 Product Resource Guide
9
SEGMENT 4/5 ENVIRONMENTS
GENERAL OFFICE/LARGE WORKGROUP
In this environment, these MFPs will typically
function as the primary document imagingsystem. It will most likely be located in ahallway or aisle amongst a number ofcubicles. It will most likely be connected tothe customers network and used as both aprinter and a copier, and possibly a faxmachine as well. These machines are alsooften used for scanning solutions such asScan-to-email, GlobalScan or DocumentMall.Security options such as User Codes,Network Authentication and EnhancedLocked Print may be found in certain
instances.
Environment Characteristics
Typically a shared output system whichmust accommodate a broad range ofapplications and be easy to use.
Usually no key operator, although oneperson may be assigned to replaceconsumables.
Generally requires print on demand and/orhost printing jobs be done in-house toreduce job turnaround time.
May employ multiple slower systems aspart of a decentralization strategy.
Volume is typically too low to justify a fulltime operator.
The Ricoh Segment 4/5 MPFs Offer
Fast throughput speeds.Large WVGA display.Exceptional ease-of-use for multiple and/or
casual users.
Advanced paper handling and finishingcapabilities.
Sophisticated document productionfeatures.
The ability to produce books and manualsin-house as opposed to outsourcing thosedocuments.
An intelligent Document Server function.Simple Scan to Folder, Scan to E-mail and
Scan to URL.
-
7/22/2019 Comparativo Segmento 4 e 5
13/107
Segment 4/5 Product Resource Guide
10
CENTRALIZED REPRODUCTION DEPARTMENT/IN-PLANT
Central Reproduction Departments(CRDs) are usually found in thebasements of large corporate locations,and handle all the copying/ printingneeds of the organization. Jobs aresubmitted in hardcopy or as electronicfiles accompanied by job tickets thatidentify all parameters of the job(quantity, covers/tabs, duplexing,finishing, etc.) along with the owner, adepartment code for charge-back, anddelivery instructions. The CRD itselfmay be company-owned, or run by athird party known as a Facilities Management firm which assumes ownership of the equipmentand personnel, and charges the company a per-click charge for every copy/print made. CRDsstill see a fair amount of copy volume, and as such they usually install Xerox DocuTech-calibersystems equipped with scanners and document feeders. As manufacturers of digitalcopier/printers have improved their throughput and media handling capabilities, this marketsegment has begun to see an influx of smaller, less expensive MFPs from Canon, Konica,Ricoh, and others. Products like the Ricoh D101 or D059 are being installed to offload small
jobs and/or handle incremental volumes that do not yet justify the purchase of anotherDocuTech. Some CRDs are also installing dedicated high-speed printers to exclusively handlegrowing print volumes.
Environment Characteristics
Copy and/or print jobs are sent to a centrallocation.
Run lengths are generally quite long.Jobs requiring covers and inserts, such as
manuals and books, are common.
Output systems are high speed, highvolume and it is not uncommon to findduplicating systems such as offset pressesin this environment.
Off-line finishing and binding are oftenrequired.
Document production charges are billed toindividual departments.
The Ricoh Segment 4/5 MPFs Offer
The ability to optimize the efficiency andcost-effectiveness of the CRD environmentby diverting some jobs to Ricoh MFPs. Short run jobs that reduce
productivity in this environment. Jobs that require stapling, saddle
stitching, Z-Folding, hole punching,covers, chapters, tabs, etc.
GBC StreamPunch III option A flexible, cost effective punching
solution for departmental tomedium level production orientedcustomers
Production Booklet Maker option Provides a flexible booklet-making
solution for small to largeCRD/PFPs
Connect Copy/Connect Print Option Connect two systems and double
output productivity.
Typically a more robust automatic featureset than traditional segment 6 systems.
-
7/22/2019 Comparativo Segmento 4 e 5
14/107
Segment 4/5 Product Resource Guide
11
Data Centers
Data Centers are thosesuper-air-conditioned rooms that house thecorporations mainframe computers. Inaddition to being cold enough to store meat,
data centers and their IT staff are taskedwith keeping the entire networkinfrastructure running smoothly. As such,IT decision-makers take a keen interest inevery peripheral that is connected to thenetwork. Because the data center dealsalmost exclusively with digital data streams,they tend to gravitate to printer-centricsolutions and have little need for scanningand copying. IBM impact/dot matrixprinters dominated this market for a longtime. Printing onto pinwheel-fed perforated
paper, those printers would noisily churn out reams of sales, inventory, and internal logisticsreports, as well as variable data applications like customer invoices and monthly statementsgenerated by room-size AS/400 mainframe computers using a proprietary printer language.The development of a number of filters now allows the data center to replace those agingspecialized printers with modern printing technology, enabling sophisticated documents tobe printed onto cut-sheet paper and finished with the same ease as a PCL or PostScriptprint job. In this context they are often referred to as front-end solutions, and data centersare embracing them. Data centers are not limited to Fortune 500 corporations; think aboutthe volume of cable TV, telephone, water, electric, gas, and credit card bills andfinancial/bank statements sent to every home and business in the country every month.
Environment Characteristics Ricoh Segment 4/5 Printers Offer
Fast Data Processing & OutputSpeeds
The standard print controller features an 800MHz DuronCPU, 384MB RAM, and a 40GB HDD to quickly prepareand queue documents for printing.
75-ppm output speed for all paper sizes with near 100%productivity for duplexed pages.
Superior Reliability &Performance
Average monthly volume range between 50,000 150,000prints with a peak period duty cycle up to 300,000 printsper month.
Minimal maintenance requirements through high-yieldsupplies: 43,000 prints per toner bottle; 350,000 prints perdeveloper bottle; 700,000 OPC drum impression life.
Vast Paper Supply 4,200-sheet internal paper supply plus 100-sheet Bypassstandard.
4,000-sheet optional Paper Feed Unit raise total papersupply to 8,300 sheets for uninterrupted operation.
-
7/22/2019 Comparativo Segmento 4 e 5
15/107
Segment 4/5 Product Resource Guide
12
Environment Characteristics Ricoh Segment 4/5 Printers Offer
Media Flexibility Standard trays and optional Paper Feed Unit acceptstocks between 14 34 lb. Bond.
Bypass Tray accepts 12 x 18 stocks up to 80 lb. Cover.Optional Paper Feed Unit can be adjusted to hold Legal or
Ledger size stocks.The Upper 1,550-sheet x 2 Tandem Tray (preset for Letter
size stock) can be converted to hold up to 1,000 sheets of11 x 17.
Tab Sheet Unit enables Tab printing and collation into thebody of documents.
Advanced FinishingCapabilities
Two Finishing options offer 3,000-sheet stacking capacitywith 30-, 50-, and 100-sheet multi-position stapling.
Booklet finishing for sets up to 15 sheets (60 total pages).2- and 3-hole punch options for both Finishers.Cover Interposer Tray adds front and/or back covers to job
streams without exposing pre-printed stocks to fusing.
Jogger option to align collated sets for off-line binding.Versatile Page DescriptionLanguage (PDL) Support
PCL 5e, PCL 6, RPCS and PostScript 3 support for use intypical Windows and Macintosh environments.
Support for several types of specialized mainframe printingapplications through the availability of Ricoh UNIX filters.
-
7/22/2019 Comparativo Segmento 4 e 5
16/107
Segment 4/5 Product Resource Guide
13
SERIES FEATURESThe Ricoh Segment 4/5 MFP Series is designed to support a variety of document productiontasks in high-volume environments with a wide range of document production and distributionrequirements. Additionally, these MFPs incorporate extensive feature sets normally reserved for
function-specific devices. In the following section, well highlight the various capabilitiesavailable in each functional mode, i.e., Copy, Scan and Print.
Auto File Name & Numbering IPv6 Printing Auto Image Density Job Interrupt Auto Paper Select Job Preset (up to 8 Jobs) Auto Reduce/Enlarge Large WVGA Panel Auto Start LDAP Search Auto Tray Switching Login/Logout button Batch Feed/Job Build Margin Adjustment Booklet Mode Mixed Originals Border/Center Erase Original Counter
Chapters (100) Paper Designate Combine Originals PDF Direct Print Connect Copy PDF Encryption Copy Counter Photo Mode Cover Insertion Preview/Thumbnail Display Creep for Booklet Repeat Mode Crop Marks Sample Copy DDNS Support Scan Once, Print Many Directional Size Scan to URL Magnification Series Copying Document Server Sheet Insertion Double Copy Simplified Display
Double Print Slip Sheets Dual Language Speed Print Duplexing Stamping Electronic Sorting Tabs Energy Saver Mode Unauthorized Copy Control Erase Edge/Center User Codes (500) Estimated Finishing Time User Defined Pages Counter User Program ID Folders User Tools Image Repeat Weekly Timer Image Rotation Windows Authentication Image Shift
-
7/22/2019 Comparativo Segmento 4 e 5
17/107
Segment 4/5 Product Resource Guide
14
TECHNOLOGY HIGHLIGHTS
The Segment 4/5 MFPs offer customers an exceptional level of system manageability andsecurity - from document creation through distribution and storage. As complete documentsolutions, both users and IT managers benefit from improved workflow and significant gains inproductivity.
Below is an overview of these features in terms of functionality and benefits customers canexpect. You should be prepared to address functionality based on application needs wheneverinstalling, servicing or repairing a segment 4/5 MFP.
Next Generation Technology
The core design of the segment 4/5 MFPs represent a dramatic departure from older machines.Typically, MFPs require separate controller boards for each core function copy, print, andscan. This hardware approach has the following drawbacks:
Function upgrades are costly to purchase and time-consuming to install.Network applications may require the installation of multiple network interface cards (NICs).
By comparison, the controller boards for the Ricoh segment 4/5 MFPs core functions (copy,print, and scan) are combined onto the main controller board. This means that when a functionis added to the base model, it is done by adding software (in the form of SD Cards) notadditional controller boards. Additionally, only a NIC and/or Fax Option board is required;providing support for any application expansion.
Since the B064, these MFPs have featured Next Generation Technology. Next GenerationTechnology offers the following benefits:
Exceptionally competitive MFP pricing.Enables all applications to share hardware resources.Reduces installation time for each function.Enables seamless integration with Ricoh document solution software, e.g., DeskTopBinder
and GlobalScan.
Faster application development time.
As you will learn, this technology significantly enhances the MFP particularly when it isworking as a networked MFP solution. For example, this technology enablesSmartDeviceMonitor or Web Image Monitor (Ricohs software and web-based network
management utilities) to manage all aspects of the system not just the printer function. Thisgives you a decided advantage in every competitive situation.
Main Unit Controller
The Ricoh Segment 4/5 MFPs employ powerful CPUs to be able to quickly process, or RIP(raster image process) scanned images. When connected to the network via the optionalScanner/Printer Kit (standard on SP models), this CPU is also used to process incoming data
-
7/22/2019 Comparativo Segmento 4 e 5
18/107
Segment 4/5 Product Resource Guide
15
streams from connected PCs. This robust processor provides the speed required to handlemultiple jobs in busy walk-up and shared networked environments.
Each unit ships with on-board RAM and a hard disk drive as standard equipment. The memoryprovides the virtual space to store data from high page count originals common to high volumeenvironments, and multiple inbound data streams when connected. RAM provides temporary
storage of files for printing or sending, and enables copying features like Scan Once/Print Many.The HDD stores data for a multitude of purposes, including address book information, fontpackages to speed printing and minimize network traffic, security-related functions such asStored Print and Locked Print modes, as well as for local document archival and print-ondemand needs with the ability to store thousands of documents for future print on demandrequirements. Additional RAM is included in the optional Scanner/Printer Kit, which boostsmemory on basic models.
1. Additional RAM is included with Scanner/Printer Kit and with Scanner/Printer models.2. In addition to the standard USB 2.0 interface, either the 10/100 BaseT interface or the 1000
BaseT interface may be installed in PCI interface #2.3. One of the following interfaces may be installed in PCI interface #3: IEEE 1284 (Parallel),
IEEE 1394, IEEE 80211b (Wireless LAN) or Bluetooth.
IPv6 Support
IPv6, or Internet Protocol version 6, is the next generation protocol designed by the IETF(Internet Engineering Task Force) to replace the current version Internet Protocol, IPv4. IPv6adds many improvements to IPv4 in areas such as routing and network auto configuration tosimply device identification and discovery.
-
7/22/2019 Comparativo Segmento 4 e 5
19/107
Segment 4/5 Product Resource Guide
16
Open Architecture
The Ricoh Segment 4/5 MFPs exceed industry standards with Ricohs Embedded SoftwareArchitecture an innovative Java (J2ME) compatible software development platform. TheEmbedded Software Architecture allows for the development of key applications that run onRicoh MFPs and LPs, dramatically enhancing your customers workflow. The Ricoh MFP caneasily be customized to meet customer needs by controlling features such as the operationpanel, printing, saving files, and scanning.
This Device Software Development Kit (SDK) provides a solution development environment tothird party developers such as Independent Software Vendors (ISVs), System Integrators (SIs),and Value Added Resellers (VARs) to handle client needs swiftly and accurately. Theadvantage for Ricoh is increased sales opportunities that these customized third party solutionswill provide.
For more information on the Embedded Software Architecture platform please go towww.ricoh.com/esa.
RiSVP Partner Program
RiSVP Independent Solutions Vendor ProgramRiSVP partners provide robust document management solutions that address customers keystrategic needs in process improvement, cost management and reduction, information security,
regulatory compliance and environmental sustainability.
Partners undergo compatibility testing to ensure the integrated solution meets RiSVPcompliance standards - thus ensuring, optimal performance and reliability of your solution. Inaddition, each RiSVP partner must commit to the highest level of support you have come toexpect from all products and services available through our sales channel Together, RiSVP andits partners best-in-class solutions respond to vertical and horizontal business needs whilemaximizing return on investment.
-
7/22/2019 Comparativo Segmento 4 e 5
20/107
Segment 4/5 Product Resource Guide
17
COPY FEATURES
The segment 4/5 models offer everything youd expect on a high volume digital imaging system all easily accessed via a large touch panel display.
Capability Description Benefits
Batch Feed/JobBuild
When an original set exceeds100 originals, the Batch Feedfunction allows users to storeoriginals into memory prior tostarting the job. Additionally,originals from different types,e.g., books, thin originals, etc.can be included in a single job.
Jobs consisting of large originalsets do not have to be separated,run individually, and thenmanually assembled.
Image quality settings can beadjusted on anoriginal-by-original basis.
Originals can be scanned fromthe ARDF and the platen glass inthis mode.
Booklet/Magazine
Mode
Booklet Mode Combines up
to four single-sided originals tocreate 8 x 11 (11 x 17folded) and 512x 8 (LetterR folded) signature booklets.
Magazine Mode Appliedwhen the original set exceedsfour originals. (Up to 15sheets)
Eliminates the labor-intensive
process of manually creatingprofessional looking booklets.
Reduces the need for costlyoutsourcing services.
CombineOriginals
Enables users to place up to16 images onto a single page.
Saves paper, which is good forthe environment.
Reduces filing costs.Cuts down on the amount of
paperwork that the businesstraveler must carry.
Covers, PaperDesignate,Chapters, OHPSlip Sheet
Covers Add front, back, bothfront and back covers, printedor not. Users can designatewhether to print on the insideor outside of the back cover.
Paper Designate Up to 100locations, printed or not.
Chapters Automatically
begins chapters on the righthand side, instead of thereverse side of duplex pages.Up to 100 chapters can bespecified.
OHP Slip Sheet Insertion Automatically places a sheetof paper, printed or not,between each overhead
Creates professional lookingdocuments in-house, whichreduces the need for costlyoutsourcing services.
Eliminates the need to manuallyinsert covers/paper designates,which increases productivity.
Eliminates the need to manually
insert blank pages in order tohave chapter pages appear onthe right hand side of the finisheddocument set.
-
7/22/2019 Comparativo Segmento 4 e 5
21/107
Segment 4/5 Product Resource Guide
18
Capability Description Benefits
transparency.
Job Preset Enables up to eight jobs including documents stored inthe Document Server to beset up and scanned into
memory while another job isbeing processed.
Increases productivity byeliminating the need to wait forone job to be completed beforethe next one can be
programmed.
Mixed SizeStapling When feeding Letter and Legal
size originals, the MFPautomatically places a staplein the correct position.
Eliminates the costs associatedwith incorrectly stapleddocuments.
OriginalOrientation
The MFP automatically rotatesimages 90 or 180 to correctlystaple sets that are fed trailingedge first due to damagedoriginals.
Enables users to feed, copy andcorrectly finish jobs that start withdamaged originals.
Sample Copy With Sample Copy, onecompleted set is produced sothat the user can check it forfinished appearance. Ifchanges in finishing or imagedensity are required, they canbe made before the rest of the
job is processed.
Eliminates excessive waste andenhances productivity.
Shrink and Center Automatically reduces animage by an equal amount on
each side of the image andcenters it on the page.
Eliminates the waste and loss ofproductivity that is associated
with the trial and error method ofmanually centering originals onthe platen glass.
Shortcut Keys Enables users to place up tosix frequently used functions,such as Combine Originals,Booklet/ Magazine Mode, etc.on the first screen of thedisplay panel.
Increases user productivity byallowing users to bypass layeredmenu commands and accessadvanced features with the touchof a finger.
Tab Copy Allows users to designate upto 100 locations within adocument set for an automatic
tab insertion. The MFP cancopy directly onto the tabextension.
Eliminates the need to send jobsthat require tabs to a CRD.
Eliminates the need to manually
collate jobs with tabs.
-
7/22/2019 Comparativo Segmento 4 e 5
22/107
Segment 4/5 Product Resource Guide
19
Capability Description Benefits
Tandem PaperTray
Holds 1,550 sheets of paperside-by-side in each tray.When one side runs out, thesystem automatically movesthe full side into place with no
disruption in the imagingprocess. Additionally, papercan be loaded in the emptyside while the MFP continuesto copy.
Maximizes paper capacity in Tray1 to 3,100 sheets withoutincreasing the overall footprint ofthe system.
Ensures uninterruptedproduction.
Weekly Timer The MFPcan be set up toautomatically turn itself on andturn itself off at user definedintervals on a daily basis. Forexample, the system can beset up to turn on at 8:00 AMand turn off at 6:00 PM
Monday through Friday.
Conserves energy resources.Increases productivity by
ensuring that that the system ison and ready to work wheneverusers need it.
-
7/22/2019 Comparativo Segmento 4 e 5
23/107
Segment 4/5 Product Resource Guide
20
Stamping Capabilities
Capability Description BenefitsBackgroundNumbering
Applies preset numbers (from1-999) on the background ofeach page.
Enables users to easilyidentify versions of documentssuch as memos.
Page Numbering Adds page numbers in one ofsix formats and in one of sixpositions.
Eliminates the need tomanually number individualpages.
Preset Stamps One of eight preset stamps can becopied onto the first or all pages:
COPY URGENT PRIORITY For Your Info. PRELIMINARY For Internal Use Only
CONFIDENTIAL DRAFT
Allows users to quickly affixcommonly used stamps ontocopied output.
User Stamp Enables users to scan in andsave up to four of their ownstamps through User Tools.
Facilitates easy customizationof copied output.
Date Stamp Stamps the date, in one of sixformats, on the first page or allpages of a document.
Provides means forconvenient record keepingand filing.
Stamp Text(Beginning with B246Series)
Allows users to specify up to64 characters of alphanumerictext to stamp in one of sixdifferent positions, on the first
page or all pages of adocument.
Facilitates customization ofcopied output.
-
7/22/2019 Comparativo Segmento 4 e 5
24/107
Segment 4/5 Product Resource Guide
21
Connect Copy/Connect Print Option
For very high volume environments, you can connect two devices to achieve output speeds of100 PPM to 180 PPM, which represents Segment 6 productivity at an exceptionally affordableacquisition point. The Connect Copy/Connect Print Option consists of:
Two connector boards one for each system.One connector cable that is 32 feet in length.Operating Instructions.
Once the connector boards are installed, the cable is plugged into the connector port on eachsystem. Users can access the Connect Copy/Printer Option only when needed when dualoperation is not required, users can still access the two devices as separate systems.
How Does It Work?
When users select the Connect Copy/Connect Print function:
The system used to apply the Connect Copy/Connect Print feature becomes the master unit.The system connected to it becomes the sub unit.
All features are selected from the master unit. The touch panel display of the sub unitchanges to indicate that the Connect Copy/Connect Print feature is in use.
Users place all originals (Connect Copy) in the document feeder of the master unit andapply any f inishing features.
As the documents are scanned, they are stored in memory on both systems.Copying begins simultaneously with half the required number of sets produced on each
system.
For printing, job is sent to document server first, then all steps are equivalent to a copy job.
Connect two MFPs of the same model,or mix & match models (e.g. B246 and B248).(But NOT models from different series.)
-
7/22/2019 Comparativo Segmento 4 e 5
25/107
Segment 4/5 Product Resource Guide
22
Benefits
Total Availability Connect Print can be enabled from any workstation, making it available toeveryone on the LAN.
Maximum Output Speed Because half the job is produced on each device, output speed isdoubled - up to 180 pages per minute - fast enough to support even the largest print jobs.
Backup Capability In the event one system is interrupted (e.g., paper or toner needs to bereplaced), the entire job will shift to the remaining system. Your customers will never bewithout printing capability.
Two Systems Users can direct their jobs to either system individually so that shorter printjobs can be run simultaneously. This clears all print queues faster, increasing theproductivity of every workstation on the LAN. In addition, your customers may want todevote one system to specialty runs, using different paper stocks. Using two systems,separately or in tandem increases the number of paper sources to 10, with a total papercapacity of 16,600 sheets - more than any printing system available.
In-house Production Users can send their jobs requiring covers, inserts and tabs to theRicoh MFP instead of costly outside sources.
Document Feeder 1:1 Output Speed
All Ricoh Segment 4/5 Series MFPs provide 100% productivity in Originals Per Minute (OPM)through the standard Document Feeder, which significantly enhances productivity of output jobsconsisting of a small number of originals.
One-Pass Duplex Scanner
These MFPs (since the B064) feature an innovative Document Feeder that scans both sides ofan original simultaneously. This capability offers many advantages:
Significantly enhances productivity when copying duplex originals.Reduces the possibility of damage to originals since they are not turned over in the
Document Feeder.
Facilitates a paperless workflow when used in conjunction with the Scan to E-mail and Scanto Folder capabilities.
-
7/22/2019 Comparativo Segmento 4 e 5
26/107
Segment 4/5 Product Resource Guide
23
Exceptionally Fast Warm-Up Time
This Series offers an amazing 30-second warm up time by employing a thin hot roller thatmakes it possible to raise fusing temperature at a rapid rate. This greatly enhances userproductivity. This short recovery time from low power (10 seconds) or off (30 seconds) willencourage users to use the Energy Save mode, thus maximizing energy efficiency.
Ricoh Segment 4/5MFPs1
Xerox WorkCentrePro 255, 265/275
Konica Minoltabixhub 750/600
Warm Up Time 30 Seconds
-
7/22/2019 Comparativo Segmento 4 e 5
27/107
Segment 4/5 Product Resource Guide
24
Linking...
The Document Server is a sophisticated document management solution that streamlines thedocument workflow. When the capabilities of the Document Server are combined with theoptional MFP functions, i.e., print and scan* along with Ricoh document solution softwaresuch as DeskTopBinder you can help your clients implement a document managementstrategy that your competitors simply cannot match. Additionally, you will want to stress thefollowing Document Server benefits:
Document Storage Store thousands of files or pages.
Features Change Users can recall the job and change any of the stored features (duplexing, inserts,
etc.) without the need to rescan the entire job.
File Merge Print files can be merged with scanned originals. Or, multiple scanned files can bemerged to form a single job.
File Name/Sort Users can name each file via manual entry or using one of 40 preset User Text
entries set through User Tools. They can also sort files by name, scan date, user IDor the total number of pages ensuring that files are easier to find and prioritize.
Memory Status Indicator The Touch Panel Display shows the amount of memory remaining so that users will
know in advance that they can store their entire job.
Job Preset The Document Server is completely integrated with the Job Preset function so that
users can select multiple jobs from storage. They can also queue electronicallystored jobs with those currently running from the scanner for increased flexibility.
Print First Page When users have recalled a job from the Document Server menu, they can choose
to print just the first page. That way, they can be certain they have requested thecorrect file(s).
Sample Set Users can request a sample set to be certain that any stored features (or features
that they have edited) are correct prior to output.
-
7/22/2019 Comparativo Segmento 4 e 5
28/107
Segment 4/5 Product Resource Guide
25
Secure Printing Users can send a print job that requires a password before the MFP outputs the job.
On Demand Printing Users can produce only the output they need, which reduces costly warehousing
and/or stocking charges. This is a very useful capability for continually evolvingdocuments such as phone directories or manuals, which require ongoing
modifications.Thumbnail View & Preview Feature (New)
Users can choose between a thumbnail view of the first page or the traditional listformat when viewing the file list. In addition, each page of a document may beviewed through the new Preview feature. The Zoom In and Zoom Out functionenables you to view documents more closely.
-
7/22/2019 Comparativo Segmento 4 e 5
29/107
Segment 4/5 Product Resource Guide
26
FINISHING OPTIONS
With this series wide range of robust finishing options can meet the needs of virtually any highvolume environment.
3,000-sheet Finisher with 100-sheet Stapler Optional 2/3 Hole Punch (User Selectable) Optional Z-Fold Unit or Multi-fold Unit Optional Cover Interposer Optional Jogger Unit Optional GBC StreamPunch III Optional BK5010 Production Booklet Maker
3,000-sheet Finisher with 50-sheet Stapler Optional 2/3 Hole Punch (User Selectable) Optional Cover Interposer Optional Jogger Unit Optional 9-bin Mailbox
Booklet Finisher 50-sheet staple capacity Up to 15 sheets can be saddle stitched, to form booklets. Optional 2/3 Hole Punch (User Selectable) Optional Z-Fold Unit or Multi-fold Unit Optional Cover Interposer Optional Jogger Unit Optional 9-bin Mailbox
-
7/22/2019 Comparativo Segmento 4 e 5
30/107
Segment 4/5 Product Resource Guide
27
Cover Interposer(Compatible with select finishers) 200-sheet paper capacity. Can insert color prints or copies as covers/inserts.
9-bin Mailbox (Compatible with select finishers) 100-sheet capacity per bin. Users can specify a particular bin.
Jogger Unit Secures each finished set in an orderly fashion
GBC SteamPunch IIIBrings sophisticated finishing capabilities in-house to maintainconfidentiality, reduce job turnaround time, and/or provide new
finishing services to for-pay establishments.
Much less expensive than competitive in-line finishingoptions
Only Ricoh offers this on-line interchangeable die punchoption in the 55-75 ppm range.
Maintains rated engine speeds of 55/65/75 ppm Sheet size: 8 x 11 Punch edge: 11 edge of 8 x 11 sheets (will not punch tabs) Punch stock weights: 20 lb. bond- 80 lb. cover Punch Capacity: Each sheet is punched one at a time Supports environments with average punch volumes up to 300,000 per month
LED indicators communicate system status as illustrated below.
Reduces amount of labor it takes to create a bound book by 50% Easily interchangeable die sets accommodate seven types of hole-punching to
produce professionally finished manuals and guides. Minimum life span of 500,000punches.
3-hole Ring Binder 11-hole VeloBind 19-hole CombBind
21-hole WireBind 32-hole WireBind 32-hole ProClick (new) 44-hole ColorCoil
-
7/22/2019 Comparativo Segmento 4 e 5
31/107
Segment 4/5 Product Resource Guide
28
BK5010 Production Booklet Maker Brings professional quality finishing to all high
volume environments Maintains rated engine speed of 55/65/75 ppm Maximum booklet stapling capacity is twice that of
ordinary booklet finishers: 30 sheets (120 pages),
based on 20 lb. bond Can fold one or two-page booklets without
stapling Supported paper sizes: 8.1 x 10.8 11 x 17 Supported paper weights:
16 lb. bond- 172 lb. index (off-line mode) 16 lb. bond- 80 lb. cover (on-line mode)
Optional Accessories: CF5010 Cover Feeder inserts up to 200 preprinted/color sheets as covers;
substitutes for the Cover Interposer to add wrap-around covers to perfect boundsets with minimal effort
BF5010 Book Folder creates perfectly bound books without glue or heat; creates
a spine that is printable, makes sets easy to identify and stack and permits thebooklet to lay flat when opened
TR5010 Trimmer Unit trims the open edge of booklets between .039 - .7 for aprofessional finish
BK5010 Rail Unit eases finisher docking/undocking Simplified user interface on the BK5010 Booklet Maker clearly displays all settings
for changes or confirmation
-
7/22/2019 Comparativo Segmento 4 e 5
32/107
Segment 4/5 Product Resource Guide
29
Z-Folding Option
The versatile Z-Folding option (available for the B140, B246 and D052 series) was a great wayfor customers to reduce costly outsourcing and enhances an already powerful suite ofprofessional finishing options. Z-Folding automatically folds over-size documents within a set sothat they end up the same size as the main pages within the document. For example, aproposal may be 50 pages long, but pages 17 and 37 are spreadsheets/ design specs/drawingson 11" x 17", while the rest of the document is 8" x11". The Z-Fold option will fold those two11" x 17" pages so that they fit within the letter-sized document, which increases the readabilityand professional look of the document. For the D062 Series this option was replaced by theMulti-fold Option.
Folding direction Mixed size originals
Multi-fold Option
The Multi-fold option replaces the Z-fold option beginning with the D062 series MFPs.
Multi Folding (RPCS/ PCL/ PS3)
-
7/22/2019 Comparativo Segmento 4 e 5
33/107
Segment 4/5 Product Resource Guide
30
Benefits of the Multi-fold Option:
Fold Type Z-fold Half-fold Letter fold-in
Letter fold-out Double parallel fold Gate fold
Folding capacity: up to 3 sheetsSupported Paper Sizes:
Single Sheet: Z Folding: 8.5 x 11 to 12 x 18 Half Folding: 8.5 x 11 to 13 x 19.2 Letter Folding: 8.5 x 11 to 12 x 18 Double Parallel/Gate Folding: 8.5 x 11 to 12 x 18
Multiple Sheets: Half Sheet: 8.5 x 11 to 13 x 19.2
Letter Folding: 8.5 x 11 to 12 x 18 Double Parallel/Gate Folding: 8.5 x 11 to 12 x 18
-
7/22/2019 Comparativo Segmento 4 e 5
34/107
Segment 4/5 Product Resource Guide
31
FAX FEATURES
When the MFP is configured with a Fax Option (available since the B246), the system istransformed into a powerful Super G3, 33.6 Kbps fax machine designed to meet thecommunication needs of mid-size workgroups and departments. Workgroups will seeproductivity boosts through:
Consolidation of hardware and supplies to support copy/print1/scan1/store/fax in a singledevice.
The ability to program up to 2,000 frequently dialed fax numbers, which minimizes thepotential for misdialed numbers.
Increased document-feeding capacities and scanning speeds over traditional fax machines,plus the ability to scan duplexed originals as large as 11 x 17 in a single operation.
The ability to designate a tray as the output destination for inbound faxes, keeping themseparate from copied or printed output.
The ability to send and receive faxes right from the desktop (LAN faxing).1Simplified search and retrieval of stored faxes via WebImageMonitor for convenient
reprinting if required.1
A second and even a third Super G3 fax line (via optional G3 Interface Type 9001) to
minimize busy signals and wait times in fax-intensive environments.
Standard JBIG Compression, which reduces transmission times to as little as two secondsper page to further minimize fax costs.
1 Requires Scan/Print Capability
Whether the application calls for filling hundreds of prescriptions each day, submittinghealthcare benefit claim forms, filing buy and sell orders for financial products, or broadcastingtodays deli lunch specials to local customers, fax remains a viable and cost-efficient way tocommunicate.
A brief review of the Segment 4/5 MFPs fax capabilities and features follows:
High Speed Super G3 Fax with Standard JBIG Compression
Uses public telephone network to transmit documents along analog lines. The 33.6 Kbpsmodem transmits faxes at 3 seconds per page or at 2 seconds per page when JBIGcompression is activated.
Three lines maximum.2,000 Quick Dial Numbers. LDAP support for searching numbers via company directory servers.Scans up to 80 pages per minute via 150-sheet ARDF.
A wide range of standard dialing, transmission, reception, and reporting features allow for allfacsimile tasks to be handled by a single, centralized fax solution.Standard 4 MB of SAF Memory holds up to 320 pages.Expand SAF memory to 2,240 pages (32 MB total) to handle large quantities of faxes.
-
7/22/2019 Comparativo Segmento 4 e 5
35/107
Segment 4/5 Product Resource Guide
32
LAN-Fax
This function enables users to transmit fax messages directly from the PC, bypassing thehardcopy/printing/scanning stage, which reduces the number of steps generally required tosend a fax message.
Inbound fax documents are stored in the systems SAF memory. Connected users can accessthe fax directly, or documents can be directed to a network folder or email address, where thefax administrator can forward the file to the appropriate recipient. Other highlights of the LANFax software include:
Cover Sheet Editor: Users can create personalized fax cover sheets that may contain thecompany logo, slogan, To, From, and Comments areas. Cover sheets can be edited andsaved to users PCs as a fixed form.
Address Book Import/Export: Data can be extracted from or poured into other LAN-Faxdrivers. This removes customer resistance to switching from existing LAN-Fax solutions toRicohs, as the primary task of manually re-entering address book entries is now automated.
Transmission Status: Transmission results can be checked via SmartDeviceMonitor orWeb Image Monitor, so users are assured faxes reached their destination.
Preview: Users can check how the document will appear on paper directly from theLAN-Fax driver.
Duplex Printing: Inbound fax documents can be printed on both sides of paper from theLAN-Fax driver, saving paper.
Simultaneous Save: Users can save the fax document as a TIFF file directly to adesignated folder on their PC while the system is sending the fax in one operation.
Wireless Faxing: If the MFP is connected to the network via the Wireless LAN option,faxing from the desktop can still be performed.
Fax Forwarding via Email: In addition to the inbound paperless fax to SAF/HDD, the RicohSegment 4/5 MFPs have the ability to forward all incoming faxes directly to anadministrators email address or folder, or you can program the MFP to forward faxes from
specific senders directly to designated receivers. Fax users can receive fax documentsanywhere, anytime, as long as a PC and Internet infrastructure are available.
Note:To enable LAN Fax capability, the Scanner/Printer Kit must be installed (standard on SPmodels) in addition to the Fax Option Type 9001. LAN Fax software is available with theScanner/Printer Unit Type 9001 and with the SP versions of the main units.
-
7/22/2019 Comparativo Segmento 4 e 5
36/107
Segment 4/5 Product Resource Guide
33
Internet Fax (T.37)
Internet Faxing1 uses the Internet to communicate with other Internet Fax enabled devices,providing free faxing. The document is received and then printed. The communication is not realtime as traditional faxing or IP Faxing is. Internet Fax machines are identified and contacted byemail addresses rather than telephone numbers. Each Internet Fax has its own email address.
The main benefit of Internet Faxing is that there are no communication (phone) costs.
Sends and receives faxes with other Internet Fax enabled units or to/from a PC.Resolution: 200 x 100, 200 x 200, 400 x 400 dpi2. Normal fax resolution is only to 200 x 200
dpi; therefore, other Internet Fax devices may not recognize higher resolutions.1Requires Scan/Print capability (SP model or SP Kit)2Requires additional memory option
IP Fax (T.38)
IP Faxing
1
allows cost-free communication over a network (LAN/WAN) and is excellent forcompanies with a large number of branch offices requiring interoffice communications. Tocommunicate with another IP Fax device on the same network just enter the IP address. IP Faxoffers:
Communication that is much faster than that of a 33.6 Kbps modem.Communication that is in real time, like traditional fax, with confirmation of delivery.A modem or email server is not required for communication.Communication that is secure because it operates behind the corporate firewall.Can be used with VoIP (Voice over IP) phone systems eliminating the need for a phone line
being connected tothe fax device.1 Requires Scan/Print capability (SP model or SP Kit)
Advanced Fax Functionality
The Aficio MP 6001/MP 7001/MP 8001/MP 9001 Series also provides a number of advancedfax features that add value to your solution, several of which are described below. Pleasereview the fax reference manual for additional information.
Fax Number Search via LDAP1
As when searching for email addresses, users can search for accurate fax numbers using thesame LDAP search function as Scan-to-Email. The company directory servers usually containprofiles of all contact data for each employee, so users can scroll through recipients by name,
email address, company name, or department, selecting only accurate, authorized recipients forfax transmissions.
Forwarding Faxes to Email1
Users can program the system to forward inbound faxes to receivers via email, so that they arenever out of reach no matter where they are in relation to the physical fax device. To enable thisfunction, a single receiver such as the system administrator is identified as the receiver of all
-
7/22/2019 Comparativo Segmento 4 e 5
37/107
Segment 4/5 Product Resource Guide
34
forwarded faxes in a workgroup. The administrator receives all faxes by email (converted toTIFF files), and re-distributes them to the intended recipient after checking the inbound faxes.
1 Requires Scan/Print capability (SP model or SP Kit)
Email Notification of Inbound Fax to Folder or HDD1
The ability to forward inbound faxes to a folder or server will improve overall workflow and savethe time and expense of printing unnecessary faxes. However, recipients would not know theyhave a fax waiting for them until they manually check their fax folder. This feature solves thatproblem by notifying users via email each time a fax is forwarded to a users folder or to thesystem HDD.
1 Requires Scan/Print capability (SP model or SP Kit)
-
7/22/2019 Comparativo Segmento 4 e 5
38/107
Segment 4/5 Product Resource Guide
35
PRINTING FEATURES
As a network printer, the Ricoh Segment 4/5 MFP or printer is well suited to handle thedemands of the medium to large workgroup/department or office. Additionally, these MFPs offerunique network printing capabilities.
Operating Systems, PDLs, Fonts, and Drivers
The Ricoh Segment 4/5 MFP or printer isready to accept data from client PCsrunning any of todays most popularclient/network operating systems, includingNovell, Windows, and Macintosh. A numberofUNIX filters are also available.
RPCS provides simple point-and-click jobprogramming for novice users, and speeds
job processing by leveraging the power of
the sending PCs CPU to prepare jobs forprinting. PCL 5e and PCL 6 are available forusers who wish to use thoseindustry-standard PDLs, while genuine
Adobe PostScript3 printing allowsMacintosh users to print to the MFP orprinter. Further, Direct PDF printing allowsusers to produce Acrobat pages withoutlaunching the software application. Best ofall, these devices feature Auto PDLSwitching, which allows multiple users tosend print jobs in various languages
simultaneously. The system automaticallyswitches to the appropriate PDL uponidentifying the incoming data type,eliminating the need for manual switchingand enabling the device to serve mixednetworks with ease.
Drivers are the dialog screens that appear when theuser clicks the PRINT command from the authoringsoftware application. Shown here is an RPCS driver
screen that uses graphic icons to represent the effectmodes will have on output. The table below outlinesthe wide range of printing features available toconnected users when they launch any of thesupported print drivers.
Network Operating Systems:
Novell NetWareWindowsMac OS 8.6-9.2x, 10.1 or laterUNIX
Page Description Languages:
RPCSPCL 5e/PCL 6
Adobe PostScript3PDF
Fonts:
Adobe PostScript3: 136 Type 1 fontsPCL: 45 Intellifonts10 TrueType fonts1 bitmap fontOptional OCR and Barcode
Drivers:
PCL 5e/6 and RPCS: WindowsPostScript3: WindowsMacintosh 8.6-9.2x (OS X Classic)Mac OS X Native (v. 10.1 or later)UNIX: Solaris, HP-UX, Red Hat Linux, SCO,
IBM AIX
-
7/22/2019 Comparativo Segmento 4 e 5
39/107
Segment 4/5 Product Resource Guide
36
Refined Print Command Stream (RPCS)
Ricoh software engineers developed RPCS for use in all Ricoh network output systems. Itsupports all models since the B064 series and is optimized for Windows clients and offers twokey advantages:
Faster throughput speed than HPs PCL XL.A comprehensive driver user interface, which dramatically increases user productivity
enabling easy access to all of the MFPs advanced finishing capabilities.
Why Does Anyone Need RPCS?
While printing devices particularly MFPs with sophisticated finishing capabilities arebecoming more common in the workgroup environment, typical PCL-type print driver designshave remained essentially unchanged. Additionally, with numerous output choices anddocument enhancement features to choose from, print drivers have become more complex,which can be frustrating for users. Some of the disadvantages of a print driver that has not kept
pace with technology include:
Setting up print jobs, especially complex ones, can be time-consuming.Complex driver interfaces can cause users to make output setting mistakes. Print jobs must
then be re-run, which is a drain on productivity and which leads to increased consumableand paper costs.
Inquiries to MIS staff from users regarding printer difficulties take these highly specializedprofessionals away from more important network management tasks.
Exceptional Ease-of-Use
The RPCS driver user interface incorporates a series ofgraphic icons that make it easy for the user to select basicand advanced operations with ease. To initiate a print job,the user simply clicks on the icon of the feature he or shewishes to apply, such as duplexing or stapling. Users cancustomize the icon set by adding icons or changing existingicons, which makes setting up a print job essentially a oneclick operation. Additionally, users can create customsettings based on routine output jobs. This providesenhanced versatility in the workgroup environment.
Enhanced Printing Productivity
In addition to one click operation, which reduces the time required to set-up print jobs, RPCSgenerates interim print files using the client PCs CPU. This shortens overall RIPing and printingtime. Additionally, RPCS is designed for high-speed processing of sophisticated graphics.
-
7/22/2019 Comparativo Segmento 4 e 5
40/107
Segment 4/5 Product Resource Guide
37
Compatibility with DeskTopBinder (Batch Printing Requires RPCS Driver)
DeskTopBinder Lite allows users to collect stored images and application files, combine theminto one document, apply finishing selections (staple, covers, hole punch, etc.), and then outputthe file as one document.
Once files have been selected and merged into one document, users can apply headers andfooters, page numbers, and finishing selections. If required, these output settings can be savedas a Custom Setting in the RPCS driver interface, which eliminates the need to repeatedly setup recurring output jobs.
RPCS Basic Operation Once the RPCS Print Driver is installed, basic print jobs are a breeze.Users simply click on the icon that represents the desired output result to send the job to theMFP.
Custom Print Settings Users can easily create their own print settings with just a few clicksof the mouse. Print job settings that can be manipulated include:
Duplexing selectionsFinishing selections including Z-FoldingOHP slip sheetCovers/chapters/paper designate/tabsPaper type/sizeLayoutWatermarksReduce/enlarge
Adjusting Print Quality RPCS provides four print quality settings, which ensure excellentimage quality regardless of the original type. Print quality settings include:
General Document word processor/spreadsheet type documentsPhotograph photos or images with gradationsDTP documents created in desktop publishing applicationsCAD CAD data/fine line workUsers can also make adjustments for Quality or SpeedQuality output quality at resolutions higher than 600 dpiSpeed output quality is 600 dpi
Finally, users can also create up to eight user-defined print quality settings.
Capabilities Only Available with RPCS
Job Binding This capability allows users to save files as temporary print files. Once the filesare saved, users can select two or more print job files, apply finishing selections, and outputthem as one document. Just like batch printing, users can apply headers and footers, pagenumbers, and f inishing selections.
-
7/22/2019 Comparativo Segmento 4 e 5
41/107
Segment 4/5 Product Resource Guide
38
Imposition Settings New features help arrange pages in special layouts to ease cutting afterprinting:
Double: Dual images of each page are printed on a larger sheet. When cut 2 finished setsare created.
Speed: Prints a job so that when sheets are cut and stacked they create a single set.
Creep Adjustment An MFP with the optionalProduction Booklet Maker has the ability to make thickbooklets, up to 30 sheets (120 pages) with optionalfinishing.
A byproduct of the production of thick booklets is thatsheets closest to the center of the book can be difficultto read if the text along the inside margins gets tooclose to the spine binding area.
RPCS Creep Adjustment shifts the content that is to beplaced on inner pages toward the outer margins tomake booklets easier to read and avoid image cut-off.
Crop Marks This new RPCS setting printscrossed lines on the sheet to indicate where to trimit for bleed images or when n-up pages are to beseparated.
Unauthorized Copy Control Embeds patterns and text under printed text. When copied, thehidden messages become legible.
Unauthorized Copy Control
Beginning with the B246, Ricohs innovative RPCS print driver supports a unique feature that noother manufacturer offers, Unauthorized Copy Control. What this feature does is embedpatterns and text under printed text, decreasing the risk of unauthorized copying of sensitivedocuments. This new functionality is ideal for smaller businesses that primarily use the system
-
7/22/2019 Comparativo Segmento 4 e 5
42/107
Segment 4/5 Product Resource Guide
39
for copy and print output; for instance, companies that copy personnel reports, compensationplans, medical records, financial reports, etc.
Unauthorized Copy Control consists of two functions:
1. Mask Type for Copying1 is a standard RPCS feature that embeds a masking pattern and
message within the original printout. If copies are made, either on the Ricoh or competitivedigital systems, the embedded message appears.
2. Data Security for Copying2, also standard in the RPCS driver, is similar to Mask Type forCopying in that it will embed patterns and text within the original printout. However, if copiesare made on a Ricoh Aficio device equipped with the Copy Data Security Unit, they will begrayed out, leaving only a 0.16 (4mm) margin of masking pattern. Otherwise, theembedded messages appear as on Mask Type for Copying.
Mask Type
for Copying
DataSecurity forCopying
Ricoh RPCS Printer Driver
*Notes:1. Some digital MFPs may not detect masking patterns.2. Requires optional Copy Data Security Unit.3. Scanner feature must be deactivated on Scan-enabled configurations.4. Copy reduction ratio less than 50% will be deactivated.
Hold Print
Beginning with the B246, Hold Print temporarily holds multiple print files in memory until the filesare selected for print (by User ID) from the control panel, perhaps at the end of the day.
Released files are automatically erased from memory. Also called a Virtual Mailbox, Hold Printreplaces the need for a physical mailbox. In essence, each user on the network has their owntray based on their User ID, e.g., John Smith. In fact, the implementation of a User ID forstorage, access and selection of Hold Print jobs is new functionality designed to improveusability and security.
-
7/22/2019 Comparativo Segmento 4 e 5
43/107
Segment 4/5 Product Resource Guide
40
Hold Print features include:
Maximum of 100 stored files*Sort print jobs by User ID from the touch-screen LCDSelect all files on the LCD at one time, then print or delete with single operation; multiple
operations are no longer needed for users to print or delete their own files
Print data is saved even if power to the system is turned offStore print settings along with Hold Print jobAutomatically deletes the file after printingHold Print jobs are automatically collated by the printer driver
*The maximum of 100 stored files includes all Hold Print, Locked Print, Sample Print and StoredPrint jobs.
Who Needs It?
Hold Print is ideal for any organization that wishes to maintain the privacy of print output inshared network environments, perhaps in human resources or the legal department. Since onlythe creator of the file can initiate printing (from the control panel), passersby cannot view or pickup pages sitting on the output tray. Organizations with centralized printing also have a concernover data being accidentally erased by a device being turned off, deleting stored jobs. Hold Print
jobs are stored in non-volatile memory, thus are safe in environments where there is openaccess to the system.
How does the MFP do it?
Hold Print is configured within the Properties screen of the printer driver. The user clicksDetails (RPCS and PCL6) and then enters a User ID. The print job is started from theapplication, e.g., Word, and the Hold Print job is sent to the device and stored. From the control
panel, the user presses Printer, Print Jobs, then Hold Print Job List to display a list of storedfiles. Most importantly, Hold Print allows the user to select a file stored in memory by his or herUser ID. The job the user wishes to print is then selected. Pressing Print opens a confirmationscreen; press Yes and the Hold Print file is printed.
*Applications with their own drivers, such as PageMaker, do not support this function.
Stored Print
Also added with the B246, Stored Print is similar in functionality to Hold Print (see previouspage) only Stored Print files are not deleted after printed out, and passwords can be set toincrease security. Files, along with any special settings, are retained for future printing. So, for
example, a user can quickly access files, perhaps manuals, price lists, brochures, and otherfrequently requested documents, by simply selecting the file from the control panel; there is noneed to boot-up a computer.
-
7/22/2019 Comparativo Segmento 4 e 5
44/107
Segment 4/5 Product Resource Guide
41
Stored Print features include:
Maximum of 100 stored files*File retention after printing to Document Server (In contrast, Hold Print automatically erases
files after print out)
Sorting of print jobs by User ID from the touch-screen LCDMultiple file print/deletion in a single operationSaving of print data even if system power is turned offStoring of print settings along with Stored Print jobSelection of all files on the LCD at one time, then print or deletion with single operation;
multiple operations are no longer needed for users to print or delete their own files
Automatic collation of Stored Print jobs by the printer driverIf desired, a 4-digit password can be used to further strengthen security
*The maximum of 100 stored files includes all Stored Print, Hold Print, Locked Print and SamplePrint jobs.
Who Needs It?
Busy office personnel that are responsible for disseminating materials, possibly employmentapplications, forms, visitor tags, training schedules, etc., will f ind Stored Print a quick, easy wayto access and print documents.
How does the MFP do it?
Stored Print is configured within the Properties screen of the printer driver. The user clicksDetails (RPCS and PCL6) and then enters a User ID. The print job is started from theapplication, e.g., Word, and the Stored Print job is sent to the device and stored. From thecontrol panel, the user presses Printer, Print Jobs, then Stored Print Job List to display a list
of stored files. Most importantly, Stored Print now allows the user to select a file stored inmemory by their User ID. The job the user wishes to print is then selected. Pressing Print,enter a password (if necessary), then select the number of sets (via the numeric keys). PressYes and the Stored Print file is printed.
Stored Print (Shared)
Stored Print (Shared) is identical to Stored Print, except it is intended to be used when UserAuthentication is selected from Properties/ Advanced Options in the PCL and RPCS printdrivers. Print jobs sent by Stored Print (Shared) and Store and Print (Shared) will be able to beseen and selected only by authenticated users.
Store and Print
Store and Print is identical to Stored Print, only it enables you to print files at the same time youare saving the data.
-
7/22/2019 Comparativo Segmento 4 e 5
45/107
Segment 4/5 Product Resource Guide
42
Stored Print features include:
Maximum of 100 stored files*Prints files at the same time it stores them to the Document Server. (In contrast, Stored Print
simply stores documents.)
Sorting of print jobs by User ID from the touch-screen LCDMultiple file print/deletion in a single operationSaving of print data even if system power is turned offStoring of print settings along with Stored Print jobSelection of all files on the LCD at one time, then print or deletion with single operation;
multiple operations are no longer needed for users to print or delete their own files
Automatic collation of Stored Print jobs by the printer driverIf desired, a 4-digit password can be used to further strengthen security*The maximum of 100 stored files includes all Store and Print, Stored Print, Hold Print, LockedPrint, and Sample Print jobs.
Store and Print (Shared)Stored and Print (Shared) is identical to Store and Print, except it is intended to be used whenUser Authentication is selected from Properties/ Advanced Options in the PCL and RPCS printdrivers. Print jobs sent by Stored Print (Shared) and Store and Print (Shared) will be able to beseen and selected only by authenticated users.
-
7/22/2019 Comparativo Segmento 4 e 5
46/107
Segment 4/5 Product Resource Guide
43
Connectivity
The Ricoh Segment 4/5 MFPs offer several ways to connect to a customers existing datanetwork.
10/100 BaseTX (standard): The most common networking protocol is Ethernet, and theprinter configurations are ready to connect right into the network. Data is transmitted ateither 10 or 100 megabits per second (Mbps), depending upon the speed of the network.Jobs are stored in a print queue, and are processed on a first-in, first-out basis.
USB 2.0 Interface (standard): Installed into the PCI slot of the main print controller board,this option allows users to connect to the MFP using the latest high-speed USB cablingmedia for plug-and-play printing at speeds up to 480 Mbps (including Macintosh).
IEEE 1284 Parallel Port (optional): This interface is used to connect a single PC to thedevice for peer-to-peer printing applications.
IEEE 1394 Interface (optional): This high speed option, IP over 1394, uses TCP/IP for printand scan functionality (requires SmartDeviceMonitor for Client v5.0 or later). Datatransmission speeds are up to 400 Mbps.
IEEE 802.11b Wireless LAN Interface (optional): The Ricoh Segment 4/5 MFP can beconfigured with industry leading wireless connectivity technology. This option allowsworkstations and laptops to print to the MFP without direct cabling. Two antennae areconnected to an access point, which relays data to the device from any computer equippedwith the proper hardware and firmware to transmit data in a wireless environment. Datatransmission speeds are as fast as 11 Mbps, and the distance from the nearest access pointat that speed is 459.3 feet, (distance rises to up to 1,312.3 feet as data transmission slowsto 1 Mbps). The Wireless LAN Interface supports both Windows and Macintosh operatingsystems, and offers 64- or 128-bit encryption to protect data traveling through the airwaves.
Bluetooth Interface (optional): Bluetooth is a technology standard designed to supportwireless communications over shorter distances, up to approximately 32.8 feet at speeds upto 1 Mbps. This technology is also employed by personal data assistants (PDAs) such as
Palm and Handspring that allow users to beam data to each other. This low cost, low-powerconnectivity alternative could be a good fit for companies with traveling executives that needaccess to printers in various offices without cabling or copying data to diskette.
1000BaseT (Gigabit Ethernet) Interface (Optional, starting with the B246 Series):High-speed Ethernet which transmits data at 1,000 megabits per second.
USB Host Interface (Optional, starting with the B246 Series): Provides a USB port forconnection to external devices such as an IC card reader or a digital camera (connection toa digital camera requires installation of PictBridge Interface Unit).
-
7/22/2019 Comparativo Segmento 4 e 5
47/107
Segment 4/5 Product Resource Guide
44
Wireless LAN Standards
Standards Band of RadioFrequency
Max TransmissionSpeed
Features
IEEE 802.11a 5GHz 54Mbps The transmission speed is fast, butsome countries are not allowed touse this band.
IEEE 802.11b 2.4GHz 11Mbps This is the most commonly usedstandard, but the effectivetransmission speed is only 11Mbps.
IEEE 802.11g 2.4GHz 54Mbps This standard is compatible withIEEE 802.11b, and supports fasttransmission speed.
Note:Customers may only select one from the following interface options: IEEE 1284, IEEE1394, Bluetooth, or 802.11b wireless (wireless LAN). If customers opt for the Gigabit Ethernetoption, they will forgo the 10/100BaseT interface.
-
7/22/2019 Comparativo Segmento 4 e 5
48/107
Segment 4/5 Product Resource Guide
45
Printer-only Version Throughput Features
Listed below are some of the system capabilities that are enabled by the G126/G148s versatilepaper supply:
Automatic PrintRotation
In the event the paper orientation selected by the user in the driver is notavailable to the system, the G126/G148 will turn the image 90 whenwriting it to the drum in order to match the orientation of paper that isavailable to it. This mode eliminates the need to dedicate a paper source Letter-R paper, and prevents the system from stopping if a user selects anorientation not loaded in the machine.
Automatic PaperSelection
Eliminates printing errors and waste by selecting the proper size paper asfunction of the size of the electronic original.
Automatic TraySwitching/Active PaperReloading
Enables the printer to switch to another source loaded with the same sizestock after the primary tray has been depleted. This allows the system tomaximize uptime and remain productive. Users can choose which sourceare eligible for ATS functionality, preventing special stocks, (colored orpre-punched papers, for example), from being pulled into normal job
streams.Users may refill depleted paper sources while the system remains inoperation. This reduces downtime as the printer never needs to stopcompletely to refill paper supplies.
Chaptering Users may program the G126/G148 to begin each new section or chapterof a document on the right hand page of duplexed sets in stead of on therear side of left hand page. This eliminates the need for users to insertblank pages into files in order to have chapter pages appear on the righthand page of finished document sets.
Front and/or BackCovers
Users can program the G126/G148 to pull stocks from multiple papersources into a single job stream to eliminate manual collation and createmore professional looking documents. Covers may be printed or left blank
Covers can be pulled from internal paper sources if the optional InterposeTray is not attached.
Sample Print Users can request the G126/G148 to produce a sample set through thedriver to be certain that all features have been programmed correctly prioto committing the printer to a lengthy print run.
Stackless Duplexing The G126/G148 duplexes 5.5 x 8.5 to 11 x 17 stocks from 17 34 lb.Bond. Stackless refers to the process in which two-sided pages arecreated one sheet at a time as they travel through and are rerouted througthe systems paper path. This allows for unlimited duplexing byeliminating older duplex tray technology (which typically held up to 50sheets), where half-finished copies were collected for second side imaging
As each page is processed independently, the printer is capable of
delivering two-sided output at near 100% productivity of its rated 75-ppmsimplex speed.
Tab Printing Allows users to designate up to 20 locations within a document set forautomatic Tab insertion. Additionally, the G126/G148 can print directly onTab extensions, and hole punch them when a Finisher is configured withthe Hole Punch option.
-
7/22/2019 Comparativo Segmento 4 e 5
49/107
Segment 4/5 Product Resource Guide
46
Networking Utilities
The G126 and G148 are equipped with innovative technologies that simplify initial networkinstallation and ongoing device discovery/identification in the event of changes to the network orlocation of the printer.
Rendezvous Support. Support for Rendezvous, Apples version of Zero ConfigurationNetworking, is a standard utility with the G126/G148. Rende