“Starting with the name of Allah who is most beneficent and merciful”

On behalf of SOUTH ASIAN ELECTRIC CONCERN, I do present my complimentsto you, and wish a happy and safe life.

Here, I briefly introduce SAEC, a well known firm all over the countryfor its unique and incomparable products. SAEC inherits a wide spectrumof knowledge from the rich experience and successful track record of itsmanagement team, earned over the years, which is gained through untiringefforts and facing the challenges of the era successfully to promoteSAEC nationwide.

We recognize the importance of team work which generates effortscollectively to set and to achieve the goals, planned by an organizationstrategy, moving on to the challenges of 21st Century.

We believe is a function of either providing a comparable value moreefficiently than competitors or performing activities at comparablecost, but in a unique way that creates more buyer value thancompetitor’s value than competitors and, hence, commands a premiumprice.

With a remarkable heritage, we look at the future to forward by learningfrom the past shortcomings and to up an organization that delivers evenbetter results to our customers, that is why SAEC is highly appreciatedby the all sectors of the country.

Engr. Prof. Dr. Suhail A. QureshiP.hD. (Power) UMIST University (England), M.Sc Electrical UMIST,University (England), B.Sc Electrical UET, Lahore (Pakistan)Head Of Power Division UET, LahoreEx-VC University of South Asia, LahoreExecutive Director Imperial University, Lahore

We are thankful to Allah Almighty who guided us to lead a manufacturingcompany which is well known as South Asian Electrical Concern (SAEC).The company has been established in 1993 having objective to create newtechniques in electrical field with best and improved productionmethods, fulfilling all the modern demands of electrical works. Itstarted its business at a limited scale which included the fabricationof Lighting Distribution Boards, MCCs, Commercial and Industrialelectrification.

Our work appreciated favorably in a short period of time and it grewinto a low voltage switchgear fabrication concern. The industrialsector, in particular, responded admirably to our services and work.

The development rate speeded up further when a workshop with better men,material and machines was set up in 1995. These changes impactedhealthily on the production and quality of work improved significantly.As a result the customer’s satisfaction increased at a great deal. Allthese efforts towards the service of industry increased the local marketshare for the company.

The company has been growing at a consistent rate since then, exploringnew areas of electrical work to serve better its customers and industry.The company is trying its best to provide best quality products to itscustomers. A team of engineers, supervisors, foremen and technicianskeep exploring new and modern techniques so that the optimum standard ofquality work may be achieved.

The un-tiring efforts and honesty of labor is the key treasure for thecompany. Quick and strong backup is provided to the site staff andcustomers in all areas so that the quality of work may improve at agreat extend.

Quality of work with excellence and perfection is the main motive of thecompany which always been given preference but the suggestions ofcustomers are most valuable to SAEC. The production department keepsfollowing these suggestions and strives for more customer satisfaction,thus ensuring day by day progress of the company.

All the sectors of the company are keen to mould their skills towardsnew and best standards of work. SAEC has a friendly working environmentfor all the employees.

Engr.Prof.Dr. Suhail A Qureshi, CEO Waheed-Ul-Zaman, Director Finance

M. Akhtar, Director Procurement &Market Analysis

Saeed-Ul-Zaman, Director Marketing &Sales

► Prof. Dr. Khaleeq –Ur-RehmanVC GCU, Ex-Chairman Physics Department UET, Lahore

► Prof. Dr. Mansoor SarwarPrincipal Computer Eng. Dept., Punjab University, Lahore

► Prof. Dr. Haroon AtiqueElectrical Engineering Department UET, Lahore

► Prof. Dr. Shankar BhawaniChairman Electronics Dept., Mehran University of E&T, Jamshoro

South Asian Electric Company’s primary objective is to transcend thecustomer's expectations. To reach this goal SAEC provides electricalequipment with conservative ratings that surpass industry standards. AllSAEC products meet or exceed ANSI, NEMA, and UL standards whereapplicable. SAEC Engineering Department has the knowledge, experience,and resources required to meet virtually any requirement. Beforeshipment, SAEC thoroughly inspects, tests, and certifies each piece ofequipment. SAEC's quality assurance program is one of the strictest inthe electrical industry.

► Sheeted Galvanized, Bolted & Powder Coated Modular panel designswith imported bus bar supports

► Competitive prices► Cutting edge technology► Prompt after sales services► Timely deliveries► Well trained & highly experienced workforce

The company is ISO Certified as well as is registered with

► WAPDA (HT Panels (M-2 Category Items – I, III, V & VII)► National Development Complex (NDC)► Pakistan Engineering Council (PEC)► National Engineering Services (NESPAK)► C&W Department, Punjab► University of Engineering & Technology (UET)► USAID – Pakistan► FAUJI Foundation (Fauji Fertilizer Company Limited, Fauji Fresh &

Freeze)

► M.V (WAPDA Approved Manufacturer), L.V & Automation SwitchgearPanels, Cable Tray & Ladders

► Project Consultancy► Installation & Troubleshooting► After Sales Services Facilities

► Government Sector Wapda/Disco’s► Power Generation Plants (IPPS)► Textile Industry► Telecom Sector► Pharmaceutical Industry► Dairy Sector► Steel Industry► Food & Beverages Industry► Sugar Industry► Pulp & Paper Mills► Poultry Industry► Oil & Gas► Chemical Industry► Wire Drawing Industry► HVAC► Water Treatment plants► Cement Industry► Allied Industry► Infrastructure► High Rise Buildings► Airports

Engr. Dr. Suhail A. QureshiCEO

Waheed Ul ZamanDirector Finance

Saeed Ul ZamanDirector M&S

Muhammad AkhtarDirector Purchase

& M. Analyses

Ejaz ur RahmanManager Finance

Javaid RasoolManager M&S

Tahir IqbalHOD Design Dep.

Muhammad AfzalAdmin Networks

M. AzharManager Sales

M. UmairElec. Engineer

M. Ahsan ArainAdmin

FaizUllah BajwaSales Engineer

Hafiz UmairMech. Draftsman

Ghulam YaseenReceptionist

Kamran RajaAsst. Manager M&S

Mubashar MehboobMech. Draftsman

WarisOffice Boy

Muhammad KamranManager Proposal

M. UsmanMech. Draftsman

M.ShahbazA.M Proposal

Hafiz Aamir HameedProposal Engineer

Zahid ChoudharyStores Incharge

Inzimam AhmadProposal Officer

► Sharing (Cutting) Machine► Bending Press Machine► Bakelite Cutting Machine► Shaper & Lath Machine► Plasma Sheet Cutter► Power & Hydraulic Press► Bus Bar Press► Arc Welding Plant

► Automatic Powder coating Plant► De-greasing/Phosphating Facility► Tin Plating Faciltiy

► Electrification, Installation & Assembly Section

► M.V & L.V Testing Benches

► Medium Voltage (M.V) Panels (WAPDA Approved Manufacturer)► Low Voltage (L.V) Panels► Feeder Pillars► Power Distribution Boards► Change-Over Panels (Manual/Automatic)► Automatic Phase Reversal Panels► Bus Couplers

► ATS/AMF Panels► Synchronizing Panels► Load Take Off Panels

► MCC Panel (DOL/ASD) (Fixed/Compartmentalized)► Variable Drives (VFD’s) & Soft Starters

► Automatic Power Factor Improvement (PFI) Panels

► Powder Coated/Perforated/Galvanized

► Up to 7500A

“Our Panels are bolted; powder coated withlocal or imported copper bus bars and

imported bus bar supports”

According to International Standards High TensionH.T) starts above 1KV AC. Here in PakistanDistribution Panels of H.T are called MediumVoltage (M.V) Panels, which are named as WapdaMetering and Consumer Panels. SAEC is theforemost name in Medium Voltage DistributionSystem. SAEC is approved from WAPDA toManufacture M.V Panels under the Category M2(ITEM-I, III, V & IV).

(WAPDA APPROVED MANUFACTURERS)

Low voltage panels are generally known as Low Tension (L.V) Panels. LowVoltage range is up to and including 1KV AC. SAEC manufactured anddelivered L.V Panels to its innumerous clients over the years. SAEC hasdeveloped a one of its own kind design of L.V Panels that is calledModular Structure (Nut & Bolted). The quality of this design is that thewhole panel can be attached and then dismantled both in no time; thismakes the panels easy to be extended in future instead of conventionalpanels. These panels have complete protection from Under Voltage, OverVoltage, Phase Failure, Phase sequence and Overloads.

PFI Panels also known as Automatic Power FactorController (AFPC) Panels is a 3-Phase, multiple-capacitor-banks, reactive power compensator. TheAPFC is capable of maintaining target powerfactor round-the-clock and keeping a check onyour electricity bills. SAEC’s APFC finds wideapplications in factories, process plants,commercial buildings, hotels and hospitals.

► Automatic control ► Up to 12 Capacitor banks► Modular construction ► Safe► Reliable ► Low- loss► Computer compatibility (OPTIONAL)► Harmonics control devices (OPTIONAL)► Harmonic Filters/Reactors (OPTIONAL)

► Conserves Energy ► Short payback period► Saves from Wapda Penalty ► Protects your equipment► Reduce switch losses► Avoids detrimental effects of Over-current

Our Auto Main Failure (AMF)panel is equipped witha complete sensing of your mains (WAPDA) andgenerator supply. AMF monitors Voltage, Currentand Frequency of both and take necessary actions,also it monitors generators fuel level so, inorder to shed down generator and generate alarmsignal on its user friendly screen.

SAEC provides solutions both of AutomaticTransfer Switch (ATS) it switches between atleast two and at most three supplies based onpriority, either Wapda – Generator, Wapda - Wapdaor Generator – Generator.

We provide both Module and Relay based solutionswith complete safety and sufficient switchingtime for supplies and cooling time for generator.

We manufacture Automatic Module basedsynchronizing panel that has all control gearsand switchgears (ACB’s/MCCB’s)necessary forsynchronizing operation such as Breakers,Protection Relays, Synchronizing Meters andRelays etc.

Systems in which part of the load is verycritical must be best served by paralleling twoor more generator sets. Paralleling power sourcesallows for a wide variety of choices in thegeneration, distribution and utilization of thesystem's power.

► Synchronizing saves losses of fuel during power generation► Synchronizing eliminate malfunctioning► Synchronizing eliminates human-dependency

► Under parallel operation all the generator sets are started at once and after module senses the required load it makes its preferences

based on its programmed logic and perform necessary operation to Save the cost of fuel used in power generation.► No human needed to monitor loads; module itself senses and monitors the load whenever a load is switched on or takes off from the system.► The module is programmed via an external input (LAPTOP/DESKTOP) to dynamically track the size of each load individually. This allows the system to quickly determine exactly how many loads are to be added or shed from the system, whether it is in the middle of the afternoon or in the middle of the night.► A user friendly main screen with navigation buttons and non- system critical buttons/switches allows operator to manually initiate automation system testing operations.► Intuitive interface makes operation simple. Little or no learning curve required to operate system.

Motor Control Centers are designed to fulfill theelectrical requirement of installed machinerylike water pumps, compressors, Blowers, Fan andall kind of motors in industry.

Motor Control Centers can operate the motors onAutomatic star-delta (ASD)/Direct on line (DOL)method through locally as well as through remotestations. These panels have different trippingsystems like Under Voltage, Over Voltage, PhaseFailure and Phase sequence, Single Phasing,Thermistor Tripping, Dry Running and thermallyOverloading.

MCC’s also have electronic over-current (EOCR)protection relays.(OPTIONAL)

SAEC manufactures Fix/Compartmentalized MCC Panels with a wide range ofStarters/Drives enlisted below:

► Direct on Line Starter (DOL)► Automatic Star Delta Starter (ASD)► Reverse-Forward Starter (R/F)► Soft Starters► Variable Speed/Frequency Drives (VSD/VFD)

Made of sheet steel clad, dust & vermin proof,floor or wall mounting, indoor or outdoor typeDistribution Boards with MCCB, MCB, TPN & Ecopper bus bar, control & indicating auxiliariesimported from renowned internationalmanufacturers. All control and indicating devicesare located at the front of upper door for easychecking by the operator.

SAEC is known for its Lighting control panelsLCP’s throughout the country, we have theexpertise in designing and manufacturing panelswhich satisfies Ingress Protection Class (IP) 54.We Manufacture Lighting control D.B’s forBuildings, Banks and Offices (Most recently atHBL Head office Lahore) and Lighting ControlPanels for Roads and parks (Most recently at RingRoad Lahore). These panels can be controlledthrough Programmable Logical Controllers (PLC’s),Photocell/LDR’s, Digital Astronomic photocellrelay, Analogue/Digital Timers, latch relays etc.

SAEC bring you a range of cable trays/laddersthat is available in different varieties as perthe client's requirements. The cable trays arefabricated in mild steel and also can be providedin pre-galvanized steel, Hot dip galvanized andpainted with approved color enamel or powdercoated, also perforated as per the requirements..Flanges of the tray can be manufactured accordingto requirements.

SAEC bring you a range of Bus Tie Ducts that isavailable up to 5000A as per the client'srequirements. The BBTD’s are fabricated in 99.99%Pure Copper, tin coated and marked with phasecolors and with imported Bus Bar supports.

University of Lahore Teaching HospitalLahore

NEW DHA Head Office Complex, DHA PH-VIIn Collaboration with Ms. Construct - LahoreFortress Square Mall, Fortress Stadium Lahore

LahoreWeatherford,Islamabad

In Collaboration with Ms. Famous Electric,KarachiFlatties Hotel

In Collaboration with Ms. Technical Associates - LahoreHerbion Pharmaceutical

Lahore410 Beded General Hospital

In Collaboration with Ms. UEC (Pvt) Ltd - BahawalpurNishat Dairy

SukhekiOmer Dairy (Bhanero Group)

SheikhupuraFauji Fresh & Freeze, Sahiwal

SahiwalSadiq Poultry

ChakriMari GasIslamabad

Ashraf Sugar MillsBahawalpur

Ring Road ProjectIn Collaboration with Ms. NLC - Lahore

NESTLE Pakistan LimitedIn Collaboration with Ms. Protech Engineering Services - Sheikhupura

Benazir Bhutto International AirportIn Collaboration with Ms. Technical Associates - Islamabad

Ittehad Sugar MillsRahim Yar KhanRESCUE 1122

In Collaboration with Ms. HRL - LahoreAdvance Fashion Ltd. (US Apparel Group)

LahoreCentaurus Towers, Islamabad

Shan FoodsIn Collaboration with Gulf Construction – Lahore

Danish School SystemsIn Collaboration with Ms. NLC – Different Sites

US Aid – World Food Program, Medical & Educational ProjectsMuzafargarh, Quetta, Lahore, Dheerkot Hospital, NikaPani etc.

Nishat Mills (Pvt.) Ltd.Almost All Units

Kohinoor Spinning Mills - Chakwal GroupLahore

Packages Industries/Bulleh Shah Paper MillsLahore/Kasur

Atlas Honda (Pvt) Ltd.Sheikhupura

Hajvari Textile MillsLahore

Ayesha Textile MillsSheikhupura

Anjum Textile MillsFaisalabad

Crescent GreenwoodPindiBhattian

Klass Textile – ExtensionLahore

Needle Point Stitching UnitLahore

ATS Synthetic International Chemical IndustriesLahore

Doctor’s HospitalLahore

Lahore Medical CollegeLahore

Medipharm PharmaceuticalLahore

PIMS Medical HospitalIslamabad

Social Security HospitalFaisalabad

GlaxosmithklineIslamabad/Karachi

McDonaldKSK/KarachiPizza HutPeshawar

SB Chicks & Poultry FeedsRawalpindiAsian Feeds

Multan

State Bank of PakistanSialkot

LUMS UniversityLahore

University Of LahoreLahore

International American SchoolLahore

International Islamic UniversityIslamabad

Ayesha Sadiqa College – ETBBLahore

Abbas Institute of Medical SciencesAJK

FC CollegeLahore

Special Education CenterFaisalabad

Pakistan School of Fashion DesignIn collaboration with Son et Lumiere - Lahore

Cinipax (Pvt.) LimitedIslamabad

Sachal StudioLahore

Muslim Commercial Bank (MCB)Gulberg,Model Town - Lahore

Citi BankMall Rd, Cavalary Ground, Barkat Market, Defense Rd, Peco Rd - Lahore

Union BankGulberg, Shadman, Township - Lahore

Bank Al-HabibDHA - Lahore

Habib Bank LimitedRHQ, Mall Road – Lahore/ Multan Cantonment

Barclays BankEmpress Rd, Peco Rd – Lahore/ Mangla/ Rawat

CBL BuildingIslamabad

Wafaqi Mohtesib BuildingIslamabad

UNO BuildingIslamabad

PCSIRIslamabad

Eastern Leather (Pvt.) LtdRaiwind/Muridkay

DG CementKalar Kahar

Pakistan Planning & Management InstituteIslamabad

Prime Minister HouseMultanSYBIRDKarachi

DATA Center Karachi Stock ExchangeKarachi

NDCDifferent SitesFauji FoundationDifferent Sites

Mobilink – Data CenterLahore/Islamabad

Mobilink – Call CenterLahore

U-Fone – MSC BuildingLahore/Karachi/IslamabadU-Fone – BSC Buildings

Peshawar/Mardan/Gujrat/Gujranwala/Sialkot/AbbotabadWarid Telecom – Customer Care Centers

Multan/Quetta/Gujranwala/Karachi/Nowshera/Murree/Faisalabad/LahoreDV Com (Client) – Telephone Exchange

Jhelum/Multan/Gujranwala/Peshawar/Abbotabad/Islamabad/DI KhanDost Steel Mills

KarachiShabbir Feeds

MultanNew Worker's Colony

Rahim Yar KhanAbu Dhabi PalaceRahim Yar KhanRYK Air Port

Rahim Yar KhanPACE Pakistan (Pvt.) Ltd

LahoreHabibRafiq Homes

LahoreDaewoo Pakistan Ltd

LahoreEOBI

Different Sites

And many more ……………………………………………

► Customer Care Centers (Business Arcade, North Nazimabad, Clifton,Karachi, Multan, Quetta, Gujranwala, Nowshera, Murree RoadRawalpindi, Peshawar, Ahmad Arcade Faisalabad, 3rdFloor LahoreCenter, Spencer Building, Lahore)

► Contractor – Nortel Networks► Complete 200 BTS Side► MSC Building (Sector I/9) Islamabad, Lahore, Karachi► BSC Peshawar, Mardan, Gujrat, Kohat, Gujranwala, Sialkot, Abbotabad

Jehlum, Multan, Gujranwala, Peshawar, Abbotabad, Islamabad, D. I. Khan

► Call Center, Lahore► Data center, Lahore.► Mobilink House, Lahore.► Data Center, Sector I-10, Islamabad

Many more projects are in progress.

► Engr. Dr. Suhail A Qureshi, CEO

► Waheed-Ul-Zaman, Director Finance

► Muhammad Akhtar, Director Purchase & Market Analysis

► Saeed-Ul-Zaman, Director Marketinginfo@saec.com.pk

► Javaid Rasool, Manager Marketing & Sales, 0322/0332 – 4455590javaid.rasool@saec.com.pk; jr.saec@gmail.com

Hanif Park, Opposite Afzaal Puli, (Canal Bank) Harbans Pura, LahorePh: 042 – 36530000-2 Fax: 042 – 36530003

Email: info@saec.com.pk ; s_a_elctric@yahoo.com

► Faizullah Bajwa, Sales Engineer 0321-8850861

Flat No.4, 2nd Floor, Plot No. 3-C, 30 Commercial Street, TouheedCommercial Area, DHA Phase-5, KarachiPh: 021-35304302 Fax: 021-35304302

Email: javaid.rasool@saec.com.pk; jr.saec@gmail.com; info@saec.com.pk

► Kamran Raja, Sales Executive, 0322-4001088

Office # 15, 1st Floor, Huzaifa Center, I-8 Markaz, IslamabadPh: 051-4861810 Fax: 051-4861810

Email: isb@saec.com.pk; info@saec.com.pk

www.saec.com.pk