company profile itek - general

PT. ITEK PRIMA CORPORINDOCONCRETE MIXER ● MOBILE CONCRETE PLANT ● CONCRETE PUMP

PT. ITEK PRIMA CORPORIDO focused in machinery and technology for the construction industry.Self-loading concrete mixer, continuous mobile concrete plant and contcrete pump to produceand distributing fresh concrete. Our ultimate goal is advancequality and profesional standardwithin Indonesia’s construction and infrastructural sector through our offering of innovativeproducts. Helping customer to achieve the lowest cost and deliver quality machinery as well asintegrated solutions and services, and thus become the channel of choice for efficient, reliableand innovative contruction technology and equipment.

Market Application

• Civil Contractor

• Cement

• Precast

• Construction

• Municipal

Product Application

• Self-loading Concrete Mixer

• Cotinuous Mobile Concrete Plant

• Concrete Pump

• Dredger

After Sales Service and Product Support

• Single supplier for spare parts and accessories

• Dedicated customer help-desk 24 hour service

• Dedicated service department in-house

• Global parts distribution network

• Optional global on-site servicing available

• Extensive training option available

(technical and commercial) on-site or in-house

www.itekprima.com

MOBILE CONTINUOUS CONCRETE PLANT

CONCRETE PUMP

SELF-LOADING CONCRETE MIXER

O

www.itekprima.com

WHAT IS

CARMIX is an innovative way to produce continuous fresh quality

concrete at all times and at all locations.

The Unit is a Mobile Self-loading Mixer powered with 4x4 Wheel Drive

traction which incorporates both batching and mixing operations.

The Unit can produce and deliver fresh concrete right on the site

whenever and wherever is needed.

It has a Front Bucket that accurately loads the aggregates, sand and

stone, into the mixing drum. This is done by driving the front bucket

straight into the aggregates piling, lifting the bucket and unloading the

aggregates into the drum.

The operator uses a lever to open the hydraulic gate installed on the

front bucket, controlling the aggregates flow into the mixing drum.

Similar operation is undertaken for the cement loading, either using the

front bucket (where there is a blade-bar to permit the breaking of the

Portland bags) or loading the cement with screw conveyor from a

mobile Silos as below shown.

1968 - Rino Liborio Galante, CARMAN

1976 - Foundation of Metalgalante and registration of CARMIX trade mark

1980 - CARMIX invents the first self loading mixer with drum slewing 300°

2012 - CARMIX export to 143 Countries 450 units per year

Just Supply The Material and Let

CARMIX . . .

LOADING

Thanks to its unique articulated hydraulically operating

shovel, CARMIX easily manages all the loading

operations off the aggregates with excellent precision.

The blade fitted inside the shovel permits the breaking

of cement bags with no waste.

From the shovel any material will flow smoothly and

quickly into the drum.

(Electronic weighing system “Load cells” available on

request).

MIXING

Once in the drum, aggregates and cement are

perfectly mixed together with the self-pumped water

from the twin tanks.

(Aditive plant available on request)

Mixing quality and therefore concrete quality is granted

by the double screw 4 mm thick, “T” type.

DELIVERING

No place is too difficult for CARMIX.

The 4 wheel drive hydrostatic transmission along with

the ideal weight balance CARMIX to climb fully loaded

over 30% gradients.

DISCHARGING

The CARMIX Revolution! With the drum slewing 300O

the operator, acting the ergonomic JoyMix, pours

concrete arround the 4 sides of the vehicle at over 2 m

of height.

Up to 300o allowing

discharging of concrete

arround the 4 sides at

over 2 meters height.

CARMIX IS THE NO 1

BATCHING PLANT ON WHEELS

The CARMIXR e v o l u t i o n

CARMIX Philosophy at is the best

• Front driving cab to assure perfect visibility

and excelent comfort to the operator.

• 300o drum slewing allows easy discharging

of concrete around the 4 sides at an

height of over 2 meters.

• Self-Articulated hydraulically operating

shovel for a more accurate loading of

aggregates and materials.

• Rear engine: easy checks. Fully balanced

equipement.

• Oil-bath built-in disc brakes: no

maintenance at all and total reliability.

• 4 wheel driving + 4 wheel steering.

• Rich fully equipped cockpit. Ergonomic

Joymix; one joystick operates all main

fuctions.

• Electronic weighing system “LOAD CELLS”

with printer to certify 100% quality of

concrete.

• CARMIX select the best suppliers in order

to assure its customers not only with top

quality but also with their worldwide after

sale network. Among others we are proud

to name PERKINS Engines, BOSCH

REXROTH Transmissions, DANFOSS

Hydraulics Motors, DANA SPICER Axles.

CARMIX 5.5 XL

The CARMIX RangeTaylor-made to your jobsite

MIXING UNIT:Drum capacity 7.600 liters. Real concrete yield perbatch 5,5 m3. Electronic weighing system “Load Cells”withprinter.

SPEED:

Working speed maximum 30 Km/h.

TRANSMISSION:Hydrostatic Bosch Rexroth 4 wheel drive and 4 wheelsteering.

ENGINE:Perkins 1106D-E 66 TA, water-cooled, 6 cylinders.Maximum power 112 kW. (157 HP).

DRIVING SEAT:

ROPS-FOPS driving cab with double closing door.

JOYMIX:

One joystick to control main functions.

CARMIX 3.5 TTMIXING UNIT:Drum capacity 4.750 liters. Real concrete yield perbatch 3,5 m3. Electronic weighing system “Load Cells”withprinter.

PRODUCTIVITY:

Up to 4 batches per hour.


ENGINE:Perkins 1104 D-44 TA turbo-diesel, water-cooled,Maximum power 111 HP.

DRIVING SEAT:


DRUM SLEWING:

300, discharging concrete arround the 4 sides at over 2 m height.

CARMIX 2.5 TTMIXING UNIT:Drum capacity 3.400 liters. Real concrete yield perbatch 2,5 m3. Electronic weighing system “Load Cells”withprinter.



DRIVING SEAT:


DRUM SLEWING:

300, discharging concrete arround the 4 sides at over 1.9 m height.

CARMIX 2.5 FXMIXING UNIT:Drum capacity 3.450 liters. Real concrete yield perbatch 2,5 m3. Electronic weighing system “Load Cells”withprinter.



DRIVING SEAT:


PRODUCTIVITY:


CARMIX ONEMIXING UNIT:Drum capacity 1.400 liters. Real concrete yield perbatch 1 m3. Electronic weighing system “Load Cells” withprinter.



DRIVING SEAT:


PRODUCTIVITY:


CARMIX DUMPER D6BUCKET:Capacity 4.500 liters. Heaped: 6 m3



DRIVING SEAT:

ROPS-FOPS Semi-Cab Reversible driving seat

PAYLOAD:

10 tons

JOYMIX:


JOYMIX:



• Carsilos enhances the building workshop productivity. It is

available in 3 different versions : 15, 28 and 34 m3. Horizontal

cement silo with extractor screw and electronic metering system.

• Electronic weighing system with load cells complete with digital

instrument and automatic measuring management.

• Main frame complete with 4 telescopic stabilizers for loading and

unloading operations from the truck. No need of other lifting

equipment.

• Electric control panel complete with additional emergency

devices.

• Vibrators and discharging screw conveyor.


Reliability and Technologi: Mission Accomplished

C A R M I X

www.itekprima.com

KIMERA mobile continuous concrete mixers able to produce concrete, mortars and cement grout. KIMERA models

can be installed on trucks, trailers, railway cab, tracks, dumper. With these models you can carry all the materials

separately (aggreagates, cement, water and additives) for producing the concrete and mix them just when needed.

For this reason they can produce higher quality fresh concrete if compared to the one produced in a fixed batching

plant and transported by truck mixer. The customer could choose to make a definitive installation or a demountable

one to exploit the truck for other equipments.

www.itekprima.com

The strength of the KIMERA plants is the double

mixing screw system that assure a perfect

homogeneity of the produced concrete. The

second directional screw can rotate horizontally

for almost 270° and vertically (with hydraulic

system) from -10° to +20° to the horizontal. The

maximum discharge height 1.62 m.

KIMERA plants are based on weighing

system both for the aggregates and cement

composed of load cells which in continuous,

control the flow entering the mixer and

make any necessary change

instantaneously. The Absolute accuracy of

this system ensures the repeatability of the

recipe and the quality of the produced

concrete.

KIMERAPerfect Mixing

www.itekprima.com

ADMIXTURES

CEMENT

AUXILIARY ENGINE

AUGER I

AUGER 2

WATER

GRAVELSAND

KIMERAContinuous Mixing Batching Plant

KIMERA products are characterized by continuous mixing

technology, which allows to, if kept loaded, continue the

production without stopping. This feature enables to use

the Kimera mixers even for large interventions with huge

quantities of concrete.

• Set up the quantity of concrete to produce.

• Set up the mix design of the concrete adjusting the

quantity of cement, water and admixtures per cubic

metre.

• Set up the specific weight of the one or two.

• Save and recall the recipes done.

• Recall the previous productions

• Read the operator’s and spareparts manual.

• While the production cycle is running the system shows

how the machine is working with the elements

consumption levels.

An Electronic Central Unit controls all the production

process. The control system is made up of a Can-BUS

electronic control unit. From the control screen the

operator is able to :

www.itekprima.com

The KIMERA RangeJUST WHAT YOU NEED WHEN YOU NEED IT

Maximum Hourly Production : 55 m3/h

Rated Production Fully Load : 9 m3/h

Aggregates Hopper Capacity : 9 m3/h

Cement Tank Capacity : 3000 kg

Water Tank Capacity : 2400 Lt

Height : 2430 mm

Length : 6678 mm

Width : 2400 mm

Weight : 3700 kg

CEMENT (kg/m3) WATER (lt/m3) PRODUCTION SPEED (m3/h)

350 170 55

400 200 50

500 250 40

700 335 30

1050 510 20

CEMENT (kg/m3) WATER (lt/m3) PRODUCTION SPEED (m3/h)

350 170 60

400 200 50

500 250 40

700 335 30

1050 510 20

Maximum Hourly Production : 70 m3/h

Rated Production Fully Load : 12 m3/h

Aggregates Hopper Capacity : 12 m3/h

Cement Tank Capacity : 4200 kg

Water Tank Capacity : 3200 Lt

Height : 2650 mm

Length : 2400 mm

Width : 6880 mm

Weight : 3800 kg

www.itekprima.com

KIMERA at workJUST WHAT YOU NEED WHEN YOU NEED IT

www.itekprima.com

M E C B OC O N C R E T E P U M P

MECBO started production of Concrete Machinery

approx 30 years ago, since the beginning focusing their

expertise in machines for concrete pumping.

MECBO was the first Company to use (between all types

of pumping systems) the “S” VALVE system swinging type,

technology for the exit of the concrete by pipeline.

They produced a large number of pumping groups

labelled MECBO and sold as well to several German

Competitors with excellent reference.

Since 10 years ago MECBO developed the PULSAR

System, still covered by Patents, which has, only & always

been used for MECBO machines.

The advantages and performances of the PULSAR System

have become a trade-mark identification of the MECBO

products.

The high quality, price value and excellent operating

system of the MECBO PULSAR have positioned this Pump

at a level even better than its best.

These elements and many years of successful production

of quality Pumps, allowed MECBO to have a large range

of Concrete Pumping Systems, with different output

capacities, different mobility and for different industry

applications.

Beside Concrete Pumps, MECBO also developed in these

years the MUD PUMPS, in all ranges of capacities and also

for very particular kinds of materials, used in the Petroleum

Drilling, Piling, Debris and other sectors of application for

most important Customers.

Some of the last machines designed by MECBO are the

SLUDGE PUMP (the Pumping Dragline Bucket) and

DUMBO.

These are products of high technology, with effective

performances for mud removal or displacement reducing

usage of alternative equipments and operators.

Sludge Pump the work is done by only one operator and

the safety of the jobsite is higher.

www.itekprima.com

M E C B OP r o d u c t R a n g e

TRUCK MOUNTED CONCRETE PUMP

TRUCK MIXER CONCRETE PUMP

GETTO SERIES

BENNA Series - Sludge Pump

www.itekprima.com

M E C B Oat Work

Head OfficeMenara Kadin Indonesia 16th Floor

Jl. HR Rasuna Said Block X-5 Kav. 2-3

Jakarta 12950, Indonesia

Phone : +62 21 5274664

Fax : +62 21 5274442

Email : [email protected]

WarehousePergudangan Surya Balaraja Blok E/22

Jl. Raya Serang Km. 28, Balaraja

Tangerang 15610 – Indonesia

www.itekprima.com

company profile itek - general

Documents