company profile 2008

1/58

COMPANY PROFILE

2/58

INDEX PAGE 1 FOREWORD 1.1 COMPANY'S POLICY 3 2 GENERAL INFORMATION 2.1 VALVOSIDER'S HISTORY 4 2.2 PLANT LOCATION 4 ÷ 5 3 CERTIFICATIONS 6 ÷ 28 4 ORGANIZATION 4.1 ORGANIZATION CHART OF COMPANY 29 4.2 PERSONNEL 30 5 PRODUCTION 5.1 PRODUCTS 31÷ 32 5.2 MATERIALS AND STOCK 33 6 APPLICABLE STANDARDS 34 7 EQUIPMENT 35 8 QUALITY ASSURANCE SERVICE AND NDT ACTIVITIES 36 ÷ 38 9 REFERENCES 9.1 SUPPLIERS 39 9.2 REGISTRATION 39 9.3 CLIENTS 40 ÷ 58

3/58

1 FOREWORD 1.1 COMPANY'S POLICY Valvosider S.r.l. is committed to providing its clients with a product which conforms

in every respect both to the requirements of the contract and the client's needs at a fair cost, within the contractual delivery time, with the highest possible safety standards, while at the same time protecting the well-being of the natural environment and the community where the materials are being produced.

To accomplish this the General Management has set up a Quality System which

operates in conformity with ISO 9001 standards. This system has been designed in such a way so that it may be modified and

improved at any stage of the production cycle, whilst also ensuring the professional and technical development of our staff.

The Managing Director has the ultimate responsibility for the development and

implementation of the Quality System. This responsibility has been delegated to the Quality Manager, who has full

authority and autonomy to develop and maintain the Quality System. The Managing Director requires that all members of the company comply with the

procedures laid down in the Quality System Manual. All management levels are responsible for ensuring that the requirements of the

Quality System Manual are both understood and observed. All employees engaged in the manufacture of goods in Valvosider's name are

responsible for producing a quality product that meets the client's specified requirements.

4/58

2 GENERAL INFORMATION 2.1 VALVOSIDER'S HISTORY Valvosider was formed in 1951 as a manufacturer of industrial valves and, after

more than 50 years of continuous growth, has become a manufacturer of international reputation.

2.2 PLANT LOCATION Valvosider is located in Borgosesia in Northern Italy between Milan and Turin ,

approximately one hour by car from both. The nearest sea port is Genoa, some 150 km from Borgosesia. The total plant area is approximately 96,000 square metres with 20,500 square metres

being under cover.

6/58

3 CERTIFICATIONS Our many years of experience in producing top quality products, together with our

policy of keeping our production facilities at the forefront of available technology, has enabled us to be certified by the following organizations:

- ATEX DIRECTIVE 94/9/EC

- ISO 9001:2000 IQNET® - CISQ / RINA

- API 6D-0166 AMERICAN PETROLEUM INSTITUTE

- API 600-0020 AMERICAN PETROLEUM INSTITUTE

- API QUALITY REGISTRAR No. 0072

- AD 2000 MERKBLATT HP 0 / AD 2000 A4 TÜV

- M0809V STOOMWEZEN

- TÜV TA-LUFT FUGITIVE EMISSION

- TÜV VDI 2440

- CE – PED (Certificate No. DGR-0036-QS-111-01)

- GOST-R & GGTN GOSGORTECHNADZOR

- URZAD DOZORU TECHNICZNEGO

- SAUDI ARAMCO Approved Vendor ID # 10002561

7/58

MANUFACTURER DECLARATION ATEX DIRECTIVE 94/9/EC

Based on the risk assessment according to EN 1127-1:1997 we declare that in case of intended use as defined in the manual, the products following named have no own potential sources of ignition. As result the products can be used in potentially explosive atmosphere. Classification: Group II

Category 1 – 2 – 3 Zone 0 – 1 – 2 – 20 – 21 – 22 Explosive Atmospheres D & G

Denomination: Wedge Gate, Globe, Swing Check, Tilting Disc,

Strainer and Through Conduit Gate Bolted Bonnet Wedge Gate, Globe, Swing Check, Tilting Disc Pressure Seal, Manual and Actuated Valves

Considered directive: Directive 94/9/EC (ATEX – Directive) Considered standards: EN 1127-1: 1997

EN 13463-1: 2001 Report number: VB 63301T Rev. 1.0 Certification body: TÜV Product Service GmbH Riedlestraße 65 80339 München Borgosesia, 09/12/2003 Valvosider S.r.l. Managing Director

Via San Rocco, 2 P. O. Box 76 13011 BORGOSESIA – ITALY

Phone +39 0163 22991 Fax +39 0163 21537

29/58

4 ORGANIZATION 4.1 ORGANIZATION CHART OF COMPANY

QUALITY ASSURANCEMANAGER(Erbetta R.)

RESEARCHDEPARTMENT

DRAWINGS

DESIGNDEPARTMENT

TECHNICALMANAGER

(Cesca G.L.)

AFTER -SALESASSISTANCE

WORKSHOP'SREQUESTS

SALESMANAGER(Moretta G.)

PURCHASEMANAGER

(Rigamonti S.)

FORWARDINGDEPARTMENT

STOREHOUSEDEPARTMENT

ASSEMBLYDEPARTMENT

WORKSHOPDEPARTMENT

PLANNINGDEPARTMENT

PRODUCTIONMANAGER

(Bagarini B.)

PERSONNELDEPARTMENT

ACCOUNTSDEPARTMENT

ADMINISTRATIVEMANAGER(Vinzio E.)

GENERALMANAGER

(Moretta P.L.)

30/58

4.2 PERSONNEL Valvosider's organization has a complement of 111 persons which is broken

down as follows: - n. 3 Design Engineers - n. 4 Quality Assurance / Quality Control Technicians - n. 9 Employees - n. 95 Technicians and workers

31/58

5 PRODUCTION 5.1 PRODUCTS Our production encompasses a wide range of valves meeting the requirements of

the chemical, petrochemical, marine and oil (on and offshore) industries.

ASME VALVES TYPE CLASS SIZE

BOLTED BONNET 150 ÷ 2500 2” ÷ 48”

CRYOGENIC EXTENDED BONNET 150 ÷ 1500 2” ÷ 40”

BELLOW SEAL 150 ÷ 1500 2” ÷ 24”

GATE API 600 BS 1414

PRESSURE SEAL BONNET 600 ÷ 2500 2” ÷ 24”

GATE API 6D THROUGH CONDUIT 150 ÷ 1500 3” ÷ 40”

BOLTED BONNET 150 ÷ 1500 2” ÷ 16”

“Y” PATTERN 150 ÷ 1500 2” ÷ 16”

ANGLE 90° 150 ÷ 1500 2” ÷ 16”

CRYOGENIC EXTENDED BONNET 150 ÷ 1500 2” ÷ 16”

BELLOW SEAL 150 ÷ 1500 2” ÷ 16”

BELLOW SEAL “Y” PATTERN 150 ÷ 1500 2” ÷ 16”

PRESSURE SEAL BONNET 600 ÷ 2500 2” ÷ 16”

GLOBE BS 1873 API 600

PRESSURE SEAL BONNET “Y” PATTERN 600 ÷ 2500 2” ÷ 16”

SWING BOLTED BONNET 150 ÷ 2500 2” ÷ 48” CHECK

BS 1868 API 6D SWING PRESSURE SEAL BONNET 600 ÷ 2500 2” ÷ 24”

PISTON BOLTED BONNET 150 ÷ 1500 2” ÷ 16” CHECK BS 1873 API 600 PISTON “Y” PATTERN BOLTED BONNET 150 ÷ 2500 2” ÷ 24”

LIFT PRESSURE SEAL BONNET “STRAIGHT” 600 ÷ 2500 2” ÷ 16”

LIFT PRESSURE SEAL BONNET “Y” PATTERN 600 ÷ 2500 2” ÷ 16” CHECK BS 1873 API 6D TILTING DISC PRESSURE SEAL BONNET 600 ÷ 2500 2” ÷ 24”

“Y” PATTERN 150 ÷ 2500 2” ÷ 24” STRAINERS

BS 1873 API 600 BASKET PATTERN 150 ÷ 2500 2” ÷ 16”

32/58

DIN VALVES

TYPE NP ND

BOLTED BONNET OVAL TYPE 16 50 ÷ 1400

BOLTED BONNET ROUND TYPE 16 ÷ 160 50 ÷ 1400

CRYOGENIC EXTENDED BONNET 16 ÷ 100 50 ÷ 600

BELLOW SEAL 16 ÷ 100 50 ÷ 600

GATE DIN 3352 DIN 3840

PRESSURE SEAL BONNET 100 ÷ 420 50 ÷ 600

BOLTED BONNET 16 ÷ 160 15 ÷ 600

“Y” PATTERN 16 ÷ 100 15 ÷ 600

ANGLE 90° 16 ÷ 100 15 ÷ 600

CRYOGENIC EXTENDED BONNET 25 ÷ 100 15 ÷ 600

BELLOW SEAL 16 ÷ 100 15 ÷ 600

BELLOW SEAL “Y” PATTERN 40 ÷ 100 50 ÷ 600

BELLOW SEAL ANGLE 90° 16 ÷ 100 15 ÷ 600

PRESSURE SEAL BONNET 100 ÷ 420 50 ÷ 600

GLOBE DIN 3352 DIN 3840

PRESSURE SEAL BONNET “Y” PATTERN 100 ÷ 420 50 ÷ 600

SWING BOLTED BONNET 16 ÷ 160 50 ÷ 1000

SWING PRESSURE SEAL BONNET 100 ÷ 420 50 ÷ 600

PISTON BOLTED BONNET 16 ÷ 160 15 ÷ 600

PISTON “Y” PATTERN BOLTED BONNET 16 ÷ 100 15 ÷ 600

PISTON ANGLE 90° BOLTED BONNET 16 ÷ 100 15 ÷ 600

LIFT PRESSURE SEAL BONNET “STRAIGHT” 100 ÷ 420 50 ÷ 600

LIFT PRESSURE SEAL BONNET “Y” PATTERN 100 ÷ 420 50 ÷ 600

CHECK DIN 3352 DIN 3840

TILTING DISC PRESSURE SEAL BONNET 100 ÷ 420 50 ÷ 600

“Y” PATTERN 16 ÷ 160 15 ÷ 600 STRAINERS

DIN 3352 DIN 3840 BASKET PATTERN 16 ÷ 160 15 ÷ 600

33/58

5.2 MATERIALS AND STOCK Our massive stock of raw castings which covers an extensive range of classes,

materials and ratings enables us to guarantee the very best deliveries. The following materials are available from stock: ASME VALVES ASTM A 216 WCB / WCC ASTM A 352 LCB / LCC ASTM A 217 WC 6 ASTM A 217 C 5 ASTM A 217 C12 ASTM A351 CF 3 ASTM A 351 CF 8 ASTM A 351 CF 8 C ASTM A 351 CF 8 M ASTM A 351 CF 3 M Materials available on request: ASTM A 217 WC 1 ASTM A 217 WC 5 ASTM A 217 WC 9 ASTM A 217 CA15 ASTM A 352 LC2 ASTM A 352 LC3 ASTM A351 CK3MCUN

ASTM A351 CN7M ASTM A890 4A / 5A / 6A Other ASTM specifications.

DIN VALVES FORGINGS EN 1.0460 CASTINGS EN 1.0619 ALLOY STEEL EN 1.7365 ALLOY STEEL EN 1.7357 ALLOY STEEL EN 1.7379 STAINLESS STEEL EN 1.4552 STAINLESS STEEL EN 1.4581 STAINLESS STEEL EN 1.4408

DUPLEX STEEL 1.4470 Materials available on request:

Other EN/DIN specifications.

34/58

6 APPLICABLE STANDARDS All Valvosider's production is carried out in observance of Valvosider's Quality

Assurance System, as set out in the Quality Assurance Manual according to ISO 9001 standard.

Valvosider's production is strictly according to the following standards.

API 600 - BS 1414 DIN 1690

Steel gate valves Technical delivery conditions for castings

API 6D - BS 1868 DIN 2401

Steel check valve Pressure and temperature data

BS 1873 DIN 2501

Steel globe valves Flanges connecting dimensions

API 6A DIN 2526

Drilling and production equipment - wellhead and christmas tree equipment

Flanges - Types of contact surfaces

API 598 DIN 3202

Valve inspection and test End-to-end dimensions

MSS SP 25 DIN 3230

Standard marking system for valves, fittings, flanges and unions

Technical conditions of delivery for valves

ASME B 16.5 DIN 3840

Steel pipe flanges and flanged fittings Valve bodies - Strength calculation in respect of internal pressure

ASME B 16.25 EN 12516-1/-2

Buttwelding ends Industrial valves - Shell design strength

ASME B 16.47 EN 1092-1

Large diameter steel flanges Flanges and their joints - Steel flanges

ASME B 16.10 EN 558-1

Face-to-face and end-to-end dimension of ferrous valves Face-to-face and centre-to-face dimensions of metal valves

ASME B 16.34 EN 12627

Steel valves, flanged, threaded and welding end Butt welding ends for steel valves

NACE MR 01.75 EN 12569

Material Requirement - Sulphite stress Requirements and tests for industrial valves

ASTM / ASME II EN 10213-1/-2/-3/-4

Iron and steel products Technical delivery conditions for steel castings for pressure purposes

AD 2000 MERKBLATT EN 12266-1

Pressure vessel rules Pressure tests, test procedures and acceptance criteria

35/58

7 EQUIPMENT We have an outgoing policy of updating our machine tools and their ancillary

equipment to enable us to use the latest models available on the market. Keeping abreast of this and anticipating future possibilities is what keeps us

young, dynamic, and ahead of our competition. MAJOR EQUIPMENT

- N. 19 CNC REVOLVING-PIECE BODY AND COVER MACHINES

- N. 9 CNC MACHINE CENTRES

- N. 6 CNC VERTICAL REVOLVING MACHINES

- N. 3 FOUR-WAYS AUTOMATIC TRANSFER UNITS FOR BODIES - N. 3 TURRET AUTOMATIC LATHES FOR BODIES

- N. 4 MULTIMATIC MACHINES FOR COMPONENTS - N. 3 SPECIAL WEDGE MACHINING

- N. 32 SEMIAUTOMATIC LATHES

- N. 8 MULTISPINDLE DRILLING MACHINES - N. 8 RADIAL DRILLS

- N. 4 MILLING MACHINES

- N. 2 THREADING AUTOMATIC MACHINES

- N. 4 ROLLING MACHINES

- N. 6 LAPPING MACHINES

- N. 2 OUTSIDE LAPPING FOR STEM

Miscellaneous supporting machine-tool and equipment, in total n. 154 individual machines.

36/58

8 QUALITY ASSURANCE SERVICE AND NDT ACTIVITIES The organisation of the Quality Assurance & Control Department is shown in the chart below.

PERSONNEL TRAINING

PROCEDURES ISSUING

SUPPLIERS QUALIFICATION

SPECIAL PROCEDURES

INTERNAL AUDITS

QUALITY ASSURANCE DEPARTMENT

CERTIFICATIONS

SUPPLIERS AUDITS

FINAL TESTS

HYDRAULIC TESTS

NDT TESTS

IN LINE INSPECTIONS

INCOMING MATERIALSQUALITY CONTROL INSPECTIONS

QUALITY CONTROL DEPARTMENT

QUALITY ASSURANCE & CONTROLDEPARTMENT

37/58

The Quality Assurance & Control Department is under direct control of the Quality Assurance Manager. The followings NDT checks can be carried out in-house by level 2 and level 3 personnel qualified according to SNT-TC-1A and ISO9712/EN473:

- DPI TEST According to ANSI B 16.34 ANNEX D

- ULTRASONIC TEST According to ANSI B 16.34 ANNEX E

- HELIUM TEST According to ASME V° ART. 10

- PMI According to ASTM

- RADIOGRAPHIC INSPECTION According to ANSI B 16.34 ANNEX B Level 2

Third party inspections are routinely carried out by the following authorities: - LLOYD'S REGISTER

- BV BUREAU VERITAS

- DNV DET NORSKE VERITAS

- ABS AMERICAN BUREAU OF SHIPPING

- GERMANISCHER LLOYD

- TÜV

- RINA REGISTRO ITALIANO NAVALE

Valvosider is authorised to carry out its own RINA inspections following the

procedures laid down in "Fiduciary Inspection" (MSC/343596). Independent laboratory inspections can be carried out by such companies as: - OMECO S.r.l. Monza (MI)

38/58

The following equipment is at the disposal of Quality Assurance & Control Department:

- HYDRO AND PNEUMATIC TEST EQUIPMENT UP TO 700 KG./CM² (N. 8)

- PMI SPECTROTEST MACHINE

- RADIOGRAPHIC EQUIPMENT (IRIDIUM 192 & COBALT 60)

- THERMOELECTRIC EQUIPMENT FOR ALLOY SORTING AND IDENTIFICATION

- MPI PROBE MACHINE

- MPI YOKE MACHINE

- HELIUM TEST MACHINE

- ULTRASONIC TEST MACHINE

- HARDNESS TESTING MACHINES

- ROUGHNESS DIGITAL TESTING MACHINE

- DPI SYSTEM

- ULTRASONIC WALL-THICKNESS DETECTOR

- ULTRASONIC PAINT-THICKNESS DETECTOR

- TORQUE KEYS

- MICROMETERS, VERNIERS AND GAUGES

39/58

9 REFERENCES 9.1 SUPPLIERS CASTINGS: FLAG S.p.A. MESTRE (VE) IFI MARCON (VE) FONDINOX SERGNANO (CR) FORGINGS: F.LLI RISETTI SRL SOLBIATE ARNO (VA) STAMPERIA DI MENZAGO S.r.l. MENZAGO (VA) RIGANTI S.p.A. VARESE MAZZETTI&GHIRINGHELLI S.r.l. SOLBIATE ARNO (VA) ISEF S.r.l. CARNAGO (VA) STEEL BARS: ACCIAIERIE VALBRUNA S.r.l. ALTAVILLA (VI) SANDVIK S.p.A. MILANO UGINE S.r.l. PESCHIERA B. (MI) COGNE S.p.A. AOSTA

PACKING TECNOTREX S.p.A. SARNICO (BG) GASKET ALPI S.N.C. CREDARO (BG) GARLOCK S.p.A. MILANO CARRARA SPA ADRO (BS)

BOLTING: O.M.E. S.p.A. ERBA (CO) BEA S.r.l. SOLBIATE OLONA (VA) BECK CRESPEL S.A. ARMENTIERES F 9.2 REGISTRATION TRIBUNAL OF VERCELLI N. 2125 CHAMBER OF COMMERCE N. 9572 VAT N. IT – 00162390025

40/58

9.3 CLIENTS Herewith a brief summary of some of our major recent projects.

CLIENT END USER PROJECT / LOCATION YEAR TYPE OF VALVES

FLUOR SAUDI POLYOLEFINS COMPANY

POLYPROPYLENE EXPANSION PROJECT

2008 GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 900 2" ÷ 24"

OMV UHDE GERMANY 2008 GATE, GLOBE AND CHECK VALVES AND STRAINERS ALLOY & STAINLESS STEEL CLASS 150 ÷ 1500 2” ÷ 10”

SNC LAVALIN / SAIPEM S.A.

SAUDI ARAMCO SHAYBAH CENTRAL PROCESS FACILITIES

2007 GATE, GLOBE & CHECK CARBON STEEL CLASS 150 ÷ 1500 INTERNALLY FBE COATED 2" ÷ 18"

SNAMPROGETTI GASCO RUWAIS - 3RD NGL TRAIN PROJECT

2007 GATE, GLOBE & CHECK CARBON, ALLOY, STAINLESS AND DUPLEX STEEL CLASS 150 ÷ 600 2" ÷ 42"

SNAMPROGETTI SAUDI ARAMCO KHURAIS CRUDE CONTRACT (KCC) / KHURAIS WATER INJECTION FACILITIES (KUC) PROJECTS

2007 GATE, GLOBE & CHECK CARBON, STAINLESS, DUPLEX AND NICKEL ALLOY STEEL CLASS 150 ÷ 600 2" ÷ 42"

SNAMPROGETTI SAUDI ARAMCO SOUTHERN AREA SEA WATER CAPACITY EXPANSION QURAYYAH SEA WATER PLANT


SNAMPROGETTI SAUDI ARAMCO QATOFIN - 450,000 MTPY OF LLDPE PROJECT - MESAIEED – QATAR


SNAMPROGETTI SAMIR – MOHAMMEDIA MOROCCO UPGRADE PROJECT


41/58


FLUOR B.V. BAYERNOIL GERMANY 2007 GATE, GLOBE AND CHECK VALVES CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 1500, NP 16 ÷ 100 2” ÷ 24”, ND 25 ÷ ND 400

ECONOSTO INT. B.V. ABB LUMMUS KIRISHI HYDROCRACKER PROJECT

2007 PRESSURE SEAL GLOBE AND PISTON CHECK VALVES LOW TEMP. CARBON STEEL CLASS 300 ÷ 1500 3” ÷ 24”

BECHTEL TECHNIP JOINT VENTURE

SAUDI ARAMCO KHURSANIYAH GAS PLANT (KGP) PROJECT

2006 GATE, GLOBE & CHECK CARBON & STAINLESS STEEL CLASS 150 ÷ 1500

2" ÷ 36"

JSC TECHNOHIM LUKOIL NEFTCHIMPROEKT 2006 MOTOR OPERATED GATE VALVES LOW TEMP. CARBON STEEL CLASS 150 ÷ 600 2" ÷ 8"

SNC LAVALIN / SAIPEM S.A.

SAUDI ARAMCO WIPS FACILITIES PROJECT

2006 GATE, GLOBE & CHECK CARBON, STAINLESS & DUPLEX STEEL CLASS 150 ÷ 1500 INTERNALLY FBE COATED 2" ÷ 18"

BEMCO SAUDI ARAMCO TWO GRADES OF GASOLINE REQUIREMENT AND ADDITIONAL CAPACITY AT NW/SW BULK PLANT

2006 GATE, GLOBE & CHECK CARBON STEEL CLASS 150 ÷ 1500 2" ÷ 16"

SNAMPROGETTI ERG NUOVE CENTRALI S.P.A.

REVAMPING CTE NUCE NORD

2006 MOTOR OPERATED GATE & GLOBE VALVES CARBON, ALLOY AND STAINLESS STEEL CLASS 150 ÷ 600 2" ÷ 42"

FOSTER WHEELER ITALIANA S.P.A.

THE BAHRAIN PETROLEUM COMPANY BSC

REFINERY GAS DESULPHURIZATION PROJECT (RGDP) - SITRA – KINGDOM OF BAHRAIN


FOSTER WHEELER ITALIANA S.P.A.

ESSO BELGIE N.V. ANTWERP COGENERATION PROJECT - ANTWERP-BELGIUM

2006 GATE VALVES CARBON AND STAINLESS STEEL CLASS 600 16"; 18”; 24"

42/58


SOLVAY LEONARDO - ROSIGNANO CORE ZONE AND ROSIGNANO NON CORE ZONE

2006 GATE AND GLOBE VALVES CARBON, ALLOY & STAINLESS STEEL NP 10 ÷ 40 ND 25 ÷ ND 250

TECHINT CONSORZIO TURBIGO 800

T800 - TURBIGO REPOWERING


2" ÷ 18"

SAIDI INTECSA UHDE B P REFINERÍA DE CASTELLON -


2" ÷ 24"

SNAMPROGETTI SAUDI ARAMCO GAS TREAT & COMPRESSION FACILITIES @ HAWIYAH NGL SAUDI ARABIA

2006 GATE, GLOBE & CHECK STAINLESS STEEL & SUPER STAINLESS STEEL CLASS 150 ÷ 600 2" ÷ 24"

TECHNIP B.V.

KHARG OLEFIN COMPLEX

KHARG ETHYLENE PLANT KHARG ISLAND IRAN

2006 GATE, CARBON STEEL CLASS 150 ÷ 300 18" ÷ 24"

PFD TENGIZCHEVROIL PFD PROJECT 571502 TENGIZ, KAZAKHISTAN

2005 GATE, LOW CARBON & STAINLESS STEEL CLASS 150 ÷ 900 2" ÷ 24"

TECHNIP USA AIR PRODUCTS APCI PORT ARTHUR II 15 MMSCFD HYDROGEN PLANT PORT ARTHUR, TEXAS U.S.A.

2005 GATE, GLOBE & CHECK P.SEAL CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 1500 2" ÷ 24"

TECHNIP EXXON MOBIL TECHNIP 15 MMSCFD HYDROGEN PLANT JOLIET, ILLINOIS U.S.A.


TECHNIP AIR PRODUCTS HYDROGEN PLANT BAYTOWN , TEXAS U.S.A.


43/58


TECHNIP AIR PRODUCTS HYDROGEN PLANT SARNIA, ONTARIO CANADA


JACOBS

ESSO NETHERLAND

ESSO NETHERLAND HEATING OIL UPGRADE THE NETHERLANDS

2005 GATE, GLOBE, CHECK & STRAINERS CARBON STEEL CLASS 150 ÷ 1500 2” ÷ 24”

TECHNIP AIR PRODUCTS HYDROGEN PLANT CONVENT, LOUISIANA U.S.A.


TECHNIP AIR PRODUCTS HYDROGEN PLANT EDMONTON, ALBERTA CANADA

2004 GATE BB & PS, GLOBE & CHECK CARBON, LOW CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 1500 2" ÷ 16"

FOSTER WHEELER ERG ULTRA DESOLFORAZIONE GASOLI PRIOLO GARGALLO ITALY

2004 GATE, GLOBE & CHECK CARBON & STAINLESS STEEL CLASS 150 ÷ 600 2" ÷ 12"

FOSTER WHEELER ERSAF FOS SUR MERE REFINERY AUTO OIL 2 FRANCE

2004 MOV GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 600 2" ÷ 12"

SAUDI ARAMCO SAUDI ARAMCO CFC CHILLER REPLCMT PHASE-1 DHARAN, RAS TANURA, AQQAIQ AND UDHAILIYA SAUDI ARAMCO

2004 MOV GATE CARBON STEEL CLASS 150 ÷ 300 6" ÷ 12"

SAUDI ARAMCO SAUDI ARAMCO KHUFF GAS PLANT SAUDI ARABIA

2004 GATE DUPLEX & STAINLESS STEEL CLASS 900 ÷ 1500 2" ÷ 6"

LINDE AG OMV WIEN REFINERY AUSTRIA

2004 GATE, GLOBE & CHECK, CRYOGENIC GATE & GLOBE CARBON, ALLOY AND S. STEEL CLASS 150 ÷ 600 2" ÷ 24"

44/58


TECHNIP B.V.

PRAX AIR BP OIL PRAX AIR SPAIN

2004 GATE, GLOBE, CHECK & STRAINERS CARBON, ALLOY & S.STEEL CLASS 150 ÷ 900 2” ÷ 24”

KVAERNER PROCESS

TEIJIN TWARON THE NETHERLANDS

2004 GATE, GLOBE, CHECK & STRAINERS CARBON & STAINLESS STEEL NP 10 ÷ 160 ND 25 / ND 400

SAUDI ARAMCO SAUDI ARAMCO JEDDAH REFINERY SAUDI ARABIA

2003 MOV GATE CARBON STEEL, FBE INTERNALLY COATED CLASS 150 18” ÷ 30”

SNAMPROGETTI SAUDI ARAMCO QATIF GOSP-2 SAUDI ARABIA

2003 GATE, GLOBE & CHECK STAINLESS & DUPLEX STEEL CLASS 150 ÷ 1500 2” ÷ 12”

CHICAGO BRIDGE & IRON

SAUDI ARAMCO QATIF GOSP-2 SAUDI ARABIA

2003 GATE, GLOBE & CHECK CARBON, STAINLESS & DUPLEX STEEL CLASS 150 ÷1500 2” ÷ 12”

FOSTER WHEELER FRANCE

ERSAF ESSO RAFFINAGE S.A.F.

PORT JEROME 21 GRAVENCHON FRANCE

2003 MOV GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷1500 2” ÷ 30”

PARAGON LITWIN IES SPA THERMAL CRACKING RAFFINERIA MANTOVA ITALY

2003 GATE BB & PS, GLOBE & CHECK CARBON & STAINLESS STEEL CLASS 150 ÷900 2” ÷ 16”

TECHNIP ITALY ABU DHABI OIL REFINING CO. (TAKREER)

UNLEADED GASOLINE LOW SULPHUR GAS OIL ABU DHABI

2003 GATE BB & PS, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷900 2” ÷ 20”

FOSTER WHEELER ITALY

POLIMERI EUROPA PRIOLO ITALY

2003 MOV & CRYOGENIC GATE, CHECK CARBON, LOW CARBON & STAINLESS STEEL CLASS 150 ÷900 2” ÷ 18”

45/58


FOSTER WHEELER ITALY

K.P.E. B.V. CRUDE II DEBOTTLENECKING & DIESEL 2005 PROJECT ROTTERDAM THE NETHERLANDS

2003 MOV GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷1500 2” ÷ 16”

SNAMPROGETTI SAUDI ARAMCO HARADH LIGHT CRUDE II SAUDI ARABIA

2002 GATE, GLOBE & CHECK CARBON, ALLOY, STAINLESS & DUPLEX STEEL CLASS 150 ÷ 1500 2” ÷ 18”

SRB SAUDI ARAMCO HARADH LIGHT CRUDE II SAUDI ARABIA

2002 GATE & CHECK CARBON & STAINLESS STEEL, CLASS 150 ÷ 1500 2” ÷ 24”

SIIRTEC NIGI SPA

GAZ COMPLEKTIMPEX

GPP- KRASNODARSKJA COMPRESSOR STATION KRASNODAR RUSSIA

2002 GATE & GLOBE 150 ÷ 600 LOW CARBON STEEL CLASS 150 ÷ 600 2” ÷ 16”

SNAMPROGETTI

KUWAIT OIL CO. K.S.C.

SABRIYAH & RAUDHATAIN FIELDS KUWAIT

2002 GATE & GLOBE LOW CARBON STEEL CLASS 1500 2” ÷ 6”

SNAMPROGETTI

KUWAIT OIL CO. K.S.C.

BOOSTER STATION BS-131 (N) KUWAIT

2002 GATE, GLOBE & CHECK STAINLESS STEEL, CARBON STEEL CLASS 150 ÷ 600 2” ÷ 10”

FOSTER WHEELER ITALIANA SPA

ESSO DEUTSCHLAND GmbH

1BD0085A/P IT020 INGOLSTAD GERMANY

2002 GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 1500 2” ÷ 8”

FOSTER WHEELER ITALIANA SPA

SARPOM SPA GT-301 REPLACEMENT PROJECT TRECATE ITALY

2002 GATE, GLOBE & CHECK CARBON STEEL CLASS 150 ÷ 600 3” ÷ 16”

EUROTECNICA SPA

OAO SIBNEFT REVAMP L-35–11 / 1000 PLANT RUSSIA

2002 GATE, GLOBE & CHECK LOW CARBON STEEL CLASS 150 ÷ 600 3” ÷ 16”

46/58


TECHNIP

SAUDI ARAMCO HARADH GAS PLANT SAUDI ARABIA

2002 GATE, GLOBE & CHECK CARBON, STAINLESS & DUPLEX STEEL CLASS 150 ÷ 1500 2” ÷ 12”

TECHNIP

SAUDI ARAMCO QATIF FACILITIES BERRI GAS PLANT SAUDI ARABIA


KVAERNER PROCESS

TEIJIN TWARON THE NETHERLANDS

2002 GATE, GLOBE & CHECK CARBON & STAINLESS STEEL NP 10 ÷ 100 ND 15 / ND 250

VENTSPILS NAFTA VENTSPILS LATVIA

2001 MOV GATE CARBON STEEL CLASS 150 – NP 16 ND 200 ÷ 600

SAUDI ARAMCO SAUDI ARAMCO KHUFF GAS PLANT SAUDI ARABIA

2001 GATE STAINLESS STEEL CLASS 1500 4”

FLUOR DANIEL BV

RUHR OEL/VEBA THE NETHERLANDS

2001 GATE, GLOBE & CHECK CARBON & STAINLESS STEEL CLASS 150 ÷ 600 2” ÷ 24”

DSM GELEEN

NAK 4 THE NETHERLANDS

2001

CRYOGENIC GATE STAINLESS STEEL CLASS 150 ÷ 300 4” ÷ 12”

MELOTTE

DSM GELEEN MAASTRICHT THE NETHERLANDS

2001

GATE CARBON STEEL NP 10 ÷ 40 ND 50 ÷ ND 600

ABB LUMMUS HT

BASF ANTWERP THE NETHERLANDS

2001 GATE, GLOBE & CHECK CARBON & STAINLESS STEEL NP 10 ÷ 100 ND 50 ÷ ND 600

47/58


TEBODIN BV

EDEA GELEEN THE NETHERLANDS

2001 GATE NP 10 / 40 CARBON STEEL NP 10 ÷ 40 ND 50 ÷ ND 700

PRIME LINK LLC VENSPILS NAFTA VENTSPILS LATVIA

2000 MOV GATE CARBON STEEL CLASS 150 – NP 16 ND 150 ÷ 900

AGIP C.I.S.B.

VIGGIANO - VALDAGRI ITALY

2000 GATE, GLOBE & CHECK CARBON, LOW CARBON, ALLOY, STAINLESS & DUPLEX STEEL CLASS 150 ÷ 600 2” ÷ 24”

ABB API FALCONARA 2000 GATE, GLOBE & CHECK CARBON, LOW CARBON & STAINLESS STEEL CLASS 150 ÷ 600 2” ÷ 18”

FINA CHEMICALS

GAS PIPELINE BELGIUM

2000 GLOBE VALVES CARBON STEEL CLASS 600 3” ÷ 6”

ABB LUMMUS HT

KUWAIT PETROLEUM

THE NETHERLANDS


ODFLELL TANKSTORAGE

THE NETHERLANDS

2000 BELLOW SEAL GATE CARBON & STAINLESS STEEL CLASS 300 2” ÷ 12”

RAYTHEON

BASF ANTWERP THE NETHERLANDS

2000 GATE, GLOBE & CHECK CARBON & STAINLESS STEEL NP 16 ÷ NP 100 ND 15 ÷ ND 500

AGIP C.I.S.B.

VIGGIANO - VALDAGRI ITALY

1999 GATE, GLOBE & CHECK CARBON, LOW CARBON, ALLOY, STAINLESS & DUPLEX STEEL CLASS 150 ÷ 1500 2” ÷ 24”

48/58


STORK

TOTAL VLISSINGEN THE NETHERLANDS


STORK

TOTAL VLISSINGEN THE NETHERLANDS

1999 BELLOW SEAL GATE 150 LB. CARBON STEEL CLASS 150 ÷ 600 2” – 8”

STORK

THE NETHERLANDS

1999 GATE BB & PS, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 900 2”÷ 30”

TOTAL

STEAM LINE VLISSINGEN THE NETHERLANDS

1999 GATE BB & PS, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 600 2”÷ 12”

KVAERNER PROCESS

EDEA GELEEN (DSM)

THE NETHERLANDS

1999 GATE, GLOBE & CHECK CARBON STEEL NP 10 ÷ NP 40 ND 15 ÷ 400

RAYTHEON

NORSK HYDRO STURE THE NETHERLANDS


SNAMPROGETTI PETROCHEMIA PLOCK S.A.

PLOCK POLAND

1998 GATE, GLOBE & CHECK CARBON & ALLOY STEEL CLASS 150 ÷ 600 2" ÷ 24"

SNAMPROGETTI ISAB ENERGY IGCC POWER PLANT PRIOLO ITALY


TECHNIPETROL ISOMERIZATION & REFORMER REVAMP PLANT GDANSK POLAND


49/58


ABB COMBUSTION ENGINEERING

CELANO ITALY

1998 GATE, GLOBE & CHECK CARBON-ALLOY STEEL CLASS 150 ÷ 600 2" ÷ 24"

AGIP ORTONA ITALY


BECHTEL AKZO NOBEL PURTA BINA INDONESIA

1998 BELLOW SEALED GLOBE & CHECK CARBON STEEL CLASS 150 2" ÷ 6"

BECHTEL TENGIZCHEVROIL KTL 2/3 EXPANSION "FLARE RELOCATION PROJECT" KAZAKHSTAN

1998 GATE & GLOBE EXTENDED BONNET BURIED SERVICE CARBON & LOW CARBON STEEL CLASS 150 ÷ 300 2" ÷ 10"

FLUOR DANIEL

T/C BLEO HOLM THE NETHERLANDS


FLUOR DANIEL

T/C SLOVNAFT THE NETHERLANDS

1998 GATE, GLOBE & CHECK CARBON & ALLOY STEEL CLASS 150 ÷ 600 2” ÷ 12”

DSM GEELEN

SIEKMANN NAK 3 THE NETHERLANDS


SNAMPROGETTI PLOCK REFINERY PLOCK POLAND

1997 GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150÷1500 2" ÷ 24"

TECNIMONT ROCHES ITALY

1997 GATE BELLOW SEAL CARBON STEEL NP 40 ND 50 ÷ 400

50/58


TECHNIPETROL AGIP ITALY 1997 GATE, GLOBE & CHECK CARBON & STAINLESS STEEL CLASS 150÷1500 2" ÷ 24"

SNAMPROGETTI ISAB REFINERY PRIOLO ITALY


ESSO REFINERY ESSO AUGUSTA ITALY


AGIP PETROLI AGIP PETROLI SANNAZZARO DE’ BURGUNDI ITALY


TECHINT ENEL BRINDISI ITALY


ENICHEM ENICHEM PRIOLO ITALY

1997 MOV GATE, GLOBE & CHECK CARBON & STAINLESS STEEL CLASS 150 ÷ 900 2" ÷ 24"

SHARJAH OIL REFINERY

SHARJAH OIL REFINERY

SHARJAH U.A.E.


ABDUL AZIZ AL ESSA & CO.

K.O.C. KUWAIT

1997 GATE & CHECK CARBON STEEL CLASS 600 ÷ 1500 4" ÷ 6"

SARAS SARAS SARROCH ITALY


51/58


BECHTEL

TENGIZCHEVROIL TENGIZ KAZAKHSTAN

1997 GATE LOW CARBON STEEL CLASS 150 ÷ 300 12" ÷ 16"

SIMON CARVES

EVC RUNCORN ENGLAND

1997 BELLOW SEAL GATE & GLOBE STAINLESS STEEL CLASS 150 ÷ 600 2" ÷ 8"

TAYLOR WOODROW

FIBROWATT THETFORD POWER ENGLAND


WHESSOE PROJECTS LIQUIGAZ MANILLA

1997 SWING CHECK CARBON & LOW CARBON STEEL CLASS 600 ÷ 1500 2” ÷ 12”

KOC SAUDI ARAMCO SAUDI ARABIA

1997 GATE CARBON & STAINLESS STEEL CLASS 150 ÷ 300 2" ÷ 10"

BROWN & ROOT

BP GALLEY NORTH SEA ENGLAND

1997 GATE & GLOBE CARBON STEEL CLASS 150 ÷ 300 3" ÷ 10"

ABB GLOBAL

BLUEWATER NORTH SEA ENGLAND

1997 GATE CARBON STEEL CLASS 150 ÷ 300 4" ÷ 12"

BECHTEL TENGIZCHEVROIL TENGIZ "DE BOTTLENECKING" KAZAKHSTAN

1997 GATE, GLOBE & CHECK LOW CARBON STEEL CLASS 300 ÷ 600 6" ÷ 12"

BROWN & ROOT TENGIZCHEVROIL TENGIZ "CRUDE RAIL-CAR LOADING" KAZAKHSTAN


52/58


FOSTER WHEELER BAHRAIN PETROLEUM

REFINERY REVAMP BAHRAIN


BECHTEL TENGIZCHEVROIL TENGIZ "AREA 700" KAZAKHSTAN


BECHTEL TENGIZCHEVROIL TENGIZ KTL 2/3 EXPANSION PROJECT "TRAIN 5" KAZAKHSTAN

1997 GATE LOW CARBON STEEL CLASS 150 ÷ 600 2" ÷ 12"

MANNESMANN GMBH

GERMANY 1997 GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 300, NP 40 ÷ 63 ND 50 ÷ ND 400

THYSSEN GAS GMBH

GERMANY

1997 GATE & GLOBE STAINLESS STEEL NP 40 ND 50 ÷ ND 400

FLUOR DANIEL GMBH

GERMANY 1997 GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 900, NP 40 ÷ 100 ND 50 ÷ ND 300

TAMOIL SA COLLOMBAY SWITZERLAND

1997 GATE CARBON & STAINLESS STEEL NP 25 ÷ NP 40 ND 50 ÷ ND 300

WINTERSHALL AG

GERMANY 1997 GATE STAINLESS STEEL NP 40 ND 50 ÷ ND 400

ESSO AG

GERMANY 1997 GATE CARBON & ALLOY STEEL NP 25 ÷ NP 40 ND 50 ÷ ND 200

53/58


SULZER TURBO AG

GERMANY 1997 GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 600 2" ÷ 20"

KRUPP HOESCH STAHL AG

GERMANY 1997 GATE CARBON, ALLOY & STAINLESS STEEL NP 16 ÷ NP 40 ND 50 ÷ ND 250

RAYTHEON

AIR LIQUIDE PORTUGAL


RAYTHEON

STATOIL MONGSTAD NORWAY


ICI

ICI ENGLAND

1996 1997

MISCELLANEOUS GATE & CHECK CARBON AND STAINLESS STEEL

RAYTHEON HOLLAND

1996 GATE, GLOBE & CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150÷1500 2" ÷ 24"

SNAMPROGETTI ENICHEM BRINDISI ITALY

1996 PNEUMATIC ACTUATED GATE, GLOBE & CHECK CARBON & STAINLESS STEEL CLASS 150 ÷ 600 2" ÷ 24"

FOSTER WHEELER R.S.O. COLLOMBAY SWITZERLAND


FORMOSA HEAVY INDUSTRY

FORMOSA TAIWAN

1996 BELLOW SEAL GLOBE CARBON STEEL CLASS 150÷300 4" ÷ 16"

54/58


TECNIMONT MONTELL HOLLAND


SNAMPROGETTI JILIN CHINA


SNAMPROGETTI PLOCK REFINERY PLOCK POLAND


Q.G.P.C. Q.G.P.C. QATAR


AIR PRODUCTS

PRONAR BRASIL

1996 CRYOGENIC GATE & GLOBE STAINLESS STEEL CLASS 600 2" ÷ 10"

FLUOR DANIEL

BANGKOK IND. GASES

BANGKOK THAILAND

1996 CRYOGENIC GATE & GLOBE STAINLESS STEEL CLASS 300 2" ÷ 12"

COSTAIN OIL & GAS ENRON SEAL SANDS ENGLAND

1996 GATE & GLOBE CARBON & ALLOY STEEL CLASS 150 ÷ 300 2" ÷ 10"

COSTAIN OIL & GAS KUNMIN CHINA

1996 GATE & GLOBE CARBON-ALLOY STEEL CLASS 150 ÷ 300 2" ÷ 10"

COSTAIN OIL & GAS SASOF SOUTH AFRICA

1996 GATE & GLOBE CARBON STEEL CLASS 150 2" ÷ 10"

55/58


LINDE WERKSGRUPPE TVT

MUNCHEN GERMANY

1996 GATE CARBON STEEL CLASS 300 ÷ 600 2" ÷ 16"

MIRO GMBH & CO KG

GERMANY 1996 GATE & GLOBE CARBON & STAINLESS STEEL CLASS 150 ÷ 300, NP 40 ÷ 63 ND 50 ÷ ND 400

RAFFINERIE VOHBURG INGOLSTADT MBH

GERMANY 1996 GATE ALLOY STEEL NP 16 ÷ NP 40 ND 50 ÷ ND 250

DOW DEUTSCHLAND INC. WERK STADE


DEUTSCHE SHELL AG


LURGI


WILHELMSHAVENER RAFFINERIE

GERMANY 1996 GATE CARBON STEEL NP 16 ÷ NP 25 ND 50 ÷ ND 200

TOYO ENGINEERING GMBH

GERMANY 1996 GATE NP 25 ÷ NP 40 CARBON-ALLOY ND 50 ÷ ND 400

BASF


56/58


KRUPP UHDE GMBH


DUPONT DE NEMOURS DEUTSCHLAND GMBH


DEUTSCHE BABCOCK BORSIG

GERMANY 1996 GATE-GLOBE CARBON STEEL NP 25 ÷ NP 40 ND 50 ÷ ND 300

DEA MINERALÖL AG


RAYTHEON

AKZO NOBEL HCL PROCESSING UNIT ROTTERDAM THE NETHERLANDS


RAYTHEON

AIR LIQUIDE ROZENBURG THE NETHERLANDS


RAYTHEON

AKZO NOBEL HCL PROCESSING UNIT ROTTERDAM THE NETHERLANDS

1995 GATE-GLOBE-CHECK CARBON, ALLOY & STAINLESS STEEL CLASS 150 ÷ 600 2” ÷ 10”

FOSTER WHEELER ESSO SINGAPORE


TECNIMONT CHINA

1995 BELLOW SEAL GATE & GLOBE, CHECK CARBON & STAINLESS STEEL CLASS 150 ÷ 600 2" ÷ 14"

57/58


TECHNIPETROL COLOMBIA


SNAMPROGETTI TUPRAS REFINERY TUPRAS TURKEY


AGIP PETROLI AGIP PETROLI SANNAZZARO DE’ BURGUNDI ITALY

1995 GATE & CHECK CARBON STEEL CLASS 150 ÷ 300 4" ÷ 24"

ESSO ESSO GERMANY


SHELL U.K. SHELL UK SCOTLAND

1995 GATE & GLOBE ALLOY & STAINLESS STEEL CLASS 300 ÷ 600 2" ÷ 24"

SNAMPROGETTI N.I.O.C. BANDAR ABBAS IRAN

1994 MOV GATE & GLOB, CHECK CARBON, ALLOY & STAINLESS STEEL 150 ÷ 900 2" ÷ 24"

company profile 2008

Documents