company confidential. ©2010 nokia 1 1 a-cover assy #partmaterial ---acover co-mold assyna 1acover...
TRANSCRIPT
Company Confidential. ©2010 Nokia 1
1
A-Cover Assy# Part Material
--- Acover co-mold assy NA
1 Acover metal frame 30x
2A-Cover Co-Molded Blank
Option 1: EXL 1414 Option 2: 9% GF PC
3 Custom screw inserts (5 x) (welded)
4 Mic 1 mesh and gasket assy
5 Screw inserts (4x) (1.4 screw)
6 Display connector gasket (Not shown)
7 Display window adhesive (Not shown)
8 Earpiece gasket (Not shown)
3
4
1
Notes for SuppliersNote A: Metal flange angles and length can be
modified to what is optimal for vendors process.
Note B: Part # 5 inserts will be heat stacked however insert molding is the backup plan
Note C: This geometry can be modified some to better meet what is optimal for vendor process
25 See Note B
See Note A
See Note C
Company Confidential. ©2010 Nokia 2
2
A-Cover Co-MoldedPART INFORMATION
PLASTIC
Black
Option 1: EXL 1414
Option 2: 9% GF PC
METAL 0.3 SUS 30X
CLASS 1 SURFACE
CMD – Polish Plastic, Black 76701 90% gloss
ADDITIONAL PROCESSES
TBD
Notes for SuppliersNote A: Provide recommendations for
plastic/metal bonding process and geometry. One area is shown however spacing and hole size and shape can be modified to vendors optimal process.
Note B: Provide design recommendations to reduced flatness and warping issues
Class 1 is all outside surfaceSee Note A
Company Confidential. ©2010 Nokia 3
3
Display gasketPART INFORMATION
Poron + adhesive
Notes for SuppliersGasket will be assembled in Nokia factory
to display, however it is beginning consider to assemble into Acover with some design changes to metal frame.