compact pumps series ebp, ld/s, me - strobl pumpen · 2017. 4. 24. · duplex super duplex high...
TRANSCRIPT
-
Series informationEBP_02_EN
Compact pumps Series EBP, LD/S, ME - Overview of products - Executions - Materials - Types of seals - Sectional and dimensional drawings
-
EBP 25-160 in bronze execution
-
1
Compact pumpsSeries EBP, LD/S, ME
General DescriptionCompact pumps of the series EBP, LD/S and ME are single-stage normal priming centrifugal pumps in space saving short-build design. Special versions for higher system pressures are available on request.
Fields of ApplicationMain field of application for these compact pumps are the conveying of clean and slightly turbid liquids in small devices, systems and machines. Due to the different materials available the conveying of different aggressive liquids in the chemical industry is possible. Our customers uses the compact pumps at the moment for the following applications:
- Recirculation of liquids in machines - Integration into industrial washing machines and washers - Air conditioning - Ship building - Water treatment - Pre-heating of combustion engines
Operating Data Flow: Q up to 90 m³/h
Total head: H up to 85 m
Motor power: P from 0,12 kW to 22 kW
Degree of protection: IP 55
Casing design pressure: 6 bar (Pumps with higher design pressure are available on request.)
ConnectionsSuction and discharge connection of EBP 20-125, 25-125-2, 25-160 and 25-200 are equipped with female threads. Adapters for different dimensions of threads, flange connections or hose connections are available on request. The EBP 20-90 is equipped with a thread for an union nut.The inline pumps EBPI 32-100, EBPI 40-125, EBPI 50-160 and EBPI 65-160 are equipped with flanges according to EN 1092. The pumps ME 90-G, LD/S 26, LD/S 40, LD/S 60, LD/S 80, ME 500 and ME 950 are versions which are available with threaded or hose connection.
MotorsAs motors induction motors with fixed bearing at the drive end, in mounting form IMB35, IMB5 resp. with special shafts are used. The triple phase motors from 0,75 kW are executed in the degree of efficiency class IE3 to EN 60034-30. Motors efficiency class IE4, NEMA Premium or explosion proof executions are available on request.
Voltages: for 1~ execution: 230V, 50Hz for 3~ execution depending on pump type: 230/400V, 50Hz or 400/690V, 50Hz 265/460V, 60Hz or 460V, 60Hz other voltages/frequencies as well as DC or hydraulic motors are available on request. Degree of protection: IP 55
Direction of rotation: EBP 20-125, EBP 25-125-2, EBP 25-160, EBP 25-200, ME 90, LD/S 40, LD/S 60, LD/S 80 - Clockwise viewed onto motor fan. EBP 20-90, LD/S 26, ME 500, ME 950 - Counter clockwise viewed onto motor fan.
-
2
Compact pumpsSeries EBP, LD/S, ME
Type Code EBP-A 25-125-2 - XX Series Execution of impeller Nominal size of discharge connection Nominal size of impeller Number of stages Execution code ME 90/6 - G-018-50 LD/S 26 - G-025-50 Series Pump size Type of connection Motor power- frequency
Series: EBP, LD/S, ME - Standard version EBPI - Pump with inline casing EBPL - Pump with bearing bracket EBPN, LDN/S, MEN - Pump with stub shaft and standard motor EBPNI - Pump with stub shaft, standard motor and inline casing
Execution of impeller: - Standard version A,B, ... - Impeller with special geometry
Nominal size of discharge connection: See dimensional drawing, characteristic curve, resp.
Type of connection: - Hose connection G - Thread
Nominal size of impeller: Nominal size of impeller in millimetres
Number of stages: - Single stage 2 - 2 stages
Motor power / frequency: 025-50 - 0,25 kW - 50 Hz etc.
Execution code: - Standard version XX - Special versions (e.g. special connections, etc.)
Materials
(a) Y501 is the standard version for all pumps Series LD/S and ME.
PartMaterial code
Standard - Y110 Y201 Y301 Y302 Y501(a) Y601 Y602 Y505 Y802
Casing Cast iron JL1040 Aluminium BronzeAluminium
bronzeStainless
steel Duplex Super duplex High alloy SS PVC
Impeller Cast iron JL 1030Cast iron JL 1030 Bronze
Aluminium bronze
Stainless steel Duplex Super duplex High alloy SS
Stainless steel
Shaft Duplex Chromium steel Duplex Super duplex High alloy SS Duplex
Additionally for EBPL
Bearing bracket Aluminium
-
3
Compact pumpsSeries EBP, LD/S, ME
Other materials are available on request.
Seal versions
Other seal versions are available on request.
Basisaus-füh-rung
Impeller options
Bronze Aluminium bronzeStainless
steel Duplex Super duplex High alloy SS
Y110 X X X X X X
Y201 X X X X X X
Y301 X X X X X
Y302 X X X X
Y501 X X X
Y601 X X
Y602 X
Material German de-scription Cast materialGerman materi-al code number EU - description
EU - material code number
ASTM - UNS - description
Cast ironGG 20 X 0.6020 EN-GJL-200 JL 1030 A48 - Grade 30
GG 25 X 0.6025 EN-GJL-250 JL 1040 A48 - Grade 35
Aluminium G-AlSi10Mg X 3.2381 AB-AlSi10Mg AB-43000 A 13600
Bronze G-CuSn10 X 2.1050.01 CuSn10-C CC480K-GS B505 - C90700
Aluminium bronze G-CuAl10Ni X 2.0975.01
CuAl10 Fe5Ni5-C CC333G-GS B505 - C95500
Chromium steel X20Cr13 1.4021 X20Cr13 1.4021 A276 - S4200
Stainless steel - 316
G-X5CrNiMo 19-11-2 X 1.4408
GX5CrNiMo 19-11-2 1.4408
A351 - CF8M - J92900
Duplex
G-X2 CrNiMoN 22-5-3 X 1.4470
GX2 CrNiMoN 22-5-3 1.4470
A995-4A -J92905
G-X2 CrNiMo-CuN
25-6-3-3X 1.4517
GX2 CrNiMo-CuN
25-6-3-31.4517 A995-4A -J93372
X2 CrNiMoN 22-5-3 1.4462
X2 CrNiMoN 22-5-3 1.4462 A276 -S31803
Super duplex
G-X2 CrNiMoN 26-7-4 X 1.4469
GX2 CrNiMoN 26-7-4 1.4469
A995-5A - J93404
X2CrNiMo-CuWN 25-7-4 1.4501
X2CrNiMo-CuWN 25-7-4 1.4501 A276 - S32760
High alloy SS
G-X2CrNiMoCu N 20-18-6 X 1.4557
GX2CrNiMoCuN 20-18-6 1.4557
A744 - 6MO - J93254
X1CrNiMoCuN 20-18-7 1.4547
X1CrNiMoCuN 20-18-7 1.4547
A276 - 6MO - S31254
PartSeal code
Z101 Z102 Z103 Z104 Z105 Z113 Z114 Z141 Z142
Rotating ring Carbon - A Carbon - A Carbon - A SiC - Q SiC - Q SiC - Q SiC - Q Carbon - B Carbon - B
Stationary seat SiC - Q SiC - Q SiC - Q SiC - Q SiC - Q SiC - Q SiC - Q Ceramics - V Ceramics - V
Elastomer NBR -P FKM -V EPDM - E FKM - V EPDM - E FKM - V EPDM - E NBR - P FKM - V
Spring 1.4571 - G 1.4571 - G 1.4571 - G 1.4571 - G 1.4571 - G Hast. C - M Hast. C - M 1.4301 - F 1.4571 - G
Metal parts 1.4571 - G 1.4571 - G 1.4571 - G 1.4571 - G 1.4571 - G Hast. C - M Hast. C - M 1.4301 - F 1.4571 - G
RemarkRubber bellow seal for pressure up to
12 bar.
Rubber bellow seal for pressure up to
12 bar.
Rubber bellow seal for pressure up to
12 bar.
Rubber bellow seal for pressure up to
12 bar.
Rubber bellow seal for pressure up to
12 bar.
Rubber bellow seal for pressure up to
12 bar.
Rubber bellow seal for pressure up to
12 bar.
Rubber bellow seal for pressure up to
6 bar.
Rubber bellow seal for pressure up to
6 bar.
-
4
Compact pumpsSeries EBP, LD/S, ME
Characteristic curve EBP, LD/S and ME(EPBI )
50Hz - 1500min-1 60Hz - 1800min-1
50Hz - 3000min-1 60Hz - 3600min-1
on requeston request
on request on request
80100
3
45
810
20
4050
30
2
1
H [m]80
100
3
45
810
20
4050
30
2
1
H [m]
80100
3
45
810
20
4050
30
2
1
H [m]80
100
3
45
810
20
4050
30
2
1
H [m]
1 2 3 4 5 8 10 20 50 100Q [m³/h]
1 2 3 4 5 8 10 20 50 100Q [m³/h]
1 2 3 4 5 8 10 20 50 100Q [m³/h]
1 2 3 4 5 8 10 20 50 100Q [m³/h]
50Hz - 3000min-1 60Hz - 3600min-180
100
3
45
810
20
4050
30
2
1
H [m]80
100
3
45
810
20
4050
30
2
1
H [m]
1 2 3 4 5 8 10 20 50 100Q [m³/h]
1 2 3 4 5 8 10 20 50 100Q [m³/h]
25-160
25-200
32-100
25-160
25-200
32-100
25-160
25-200
32-100
25-160
25-200
32-100
40-1
25 40-1
25
40-1
25 40-1
25
25-125-2
20-125
20-125
25-125-2
20-125
25-125-2
20-90
25-125-2
25-125
20-90
50-1
6065
-160
50-1
6065
-160
50-1
6065
-160
50-1
6065
-160
ME 90
LD/S 26
LD/S 40LD/S 60
LD/S 80
ME 500ME 950
ME 90LD/S 26
LD/S 40
LD/S 60
LD/S 80
ME 500 ME 950
ME 110ME 110
-
5
Compact pumpsSeries EBP, LD/S, ME
Dimensional drawing EBP 25-160 and 25-200 with motor IP 55
~L
e1
x
b1
b4
b
a
h2
f1
DND pipe thread acc. to DIN 2999
h1
a1
b3
DNS pipe thread acc. to DIN 2999
s1
Type Motor min-1 DNS DND a b a1 b1 b3 b4 e1 f1 h1 h2 s1 x L kg
EBP 20-125
0,06/0,07 kW
1500/1800
IG ¾“ IG ¾“ 50 75
71 90
89 85
91 110 56
103
6 112 28810
0,09/0,11 kW 10
0,12/0,14 kW
80 100 100 125 63 7 105 306
11
0,18/0,22 kW
3000/3600
11
0,25/0,30 kW 12
0,37/0,44 kW90 112 115 138 71
8
110 31113
0,55/0,66 kW 14
0,75/0,9 kW100 125 125 160 80 115 335
17
1,1/1,3 kW 18
EBP 25-160
0,37/0,44 kW
1500/1800
IG 1“ IG 1“ 52 80
90 112
115 115
115 138 71
100
8
133 339 18
0,55/0,66 kW100 125 125 160 80 138 363
20
0,75/0,9 kW 21
0,55/0,66 kW
3000/3600
90 112 115 138 71 133 339 18
0,75/0,9 kW
100125 125 160 80 138 363
20
1,1/1,3 kW 21
1,5/1,8 kW140
130182 90 10 144
380 25
2,2/2,6 kW 125 155 395 28
3,0/3,6 kW 140 160 175 200 100 11 151 425 31
EBP 25-200
0,55/0,66 kW
1500/1800
IG 1“ IG 1“ 60 110
100125
150 150
125 160 80
130
8 165 42529
0,75/0,9 kW 30
1,1/1,3 kW
140
130
182 90 10 171
442 33
1,5/1,8 kW125 155 457
35
2,2/2,6 kW
3000/3600
37
3,0/3,6 kW
140
160175
200 100 11 178 487 40
4,0/4,8 kW 190 235 112
12
185 504 49
5,5/6,6 kW216 218 260 132 204 550
62
7,5/9,0 kW 68
Other dimensional drawings on request. The weights are for the material execution Y110.
-
6
Compact pumpsSeries EBP, LD/S, ME
Dimensional drawing EBPN 25-160 and 25-200 with motor IP 55
~L
e1
x
b1
b4
b
a
h2
f1
DND pipe thread acc. to DIN 2999
h1
a1
b3
DNS pipe thread acc. to DIN 2999
s1
Type Motor min-1 DNS DND a b a1 b1 b3 b4 e1 f1 h1 h2 s1 x L kg
EBPN 20-125
0,06/0,07 kW
1500/1800
IG ¾“ IG ¾“ 50 75
71 90
89 85
91 110 56
103
6 112 28813
0,09/0,11 kW 13
0,12/0,14 kW
80 100 100 125 63 7 105 306
14
0,18/0,22 kW
3000/3600
14
0,25/0,30 kW 15
0,37/0,44 kW90 112 115 138 71
8
110 31116
0,55/0,66 kW 17
0,75/0,9 kW100 125 125 160 80 115 335
22
1,1/1,3 kW 23
EBPN 25-160
0,37/0,43 kW
1500/1800
IG 1“ IG 1“ 52 80
90 112
115 115
100 125 71
100
8
133 359 21
0,55/0,63 kW100 125 125 160 80 138 421
25
0,75/0,86 kW 26
0,55/0,63 kW
3000/3600
90 112 100 125 71 133 359 21
0,75/0,86 kW
100125 125 160 80 138 421
25
1,1/1,27 kW 26
1,5/1,75 kW140
130182 90 10 144 466
32
2,2/2,55 kW 125 155 35
3,0/3,45 kW 140 160 175 200 100 11 151 480 42
EBPN 25-200
0,55/0,63 kW
1500/1800
IG 1“ IG 1“ 60 110
100125
150 150
125 160 80
130
8 165 44533
0,75/0,86 kW 34
1,1/1,27 kW
140
130
182 90 10 171 487
39
1,5/1,75 kW125 155
41
2,2/2,55 kW
3000/3600
43
3,0/3,45 kW
140
160175
200 100 11 178 532 46
4,0/4,55 kW 190 235 112
12
185 549 55
5,5/6,3 kW216 180 260 132 204 615
72
7,5/8,6 kW 78
-
7
Compact pumpsSeries EBP, LD/S, ME
Dimensional drawing EBP 20-90 and 25-125-2 with motor IP 55a1x
e1
b1f1
b
~L
h2
h1
b3 b4
DND
DNS
b1f1
~L
s1
s1
a
h1
x a1e1
h2
DND
DNS
b3
Type Motor min-1 DNS DND a b a1 b1 b3 b4 e1 f1 h1 h2 s1 x L kg
EBP 20-20 0,25/0,25 kW 3000/3600 AG 1¼ AG 1¼ 45 37 90 112 80 119 115 138 71 130 7 139 304 10
Type Motor min-1 DNS DND a a1 b1 b3 e1 f1 h1 h2 s1 x L kg
EBP 25-125-2
0,12/0,14 kW
1500/1800
IG 1¼“ IG 1“ 111
80 100
200
100 125 63
120
7 220 45618
0,18/0,22 kW 19
0,25/0,30 kW90 112 115 138 71
8
225 46121
0,37/0,44 kW 23
0,55/0,66 kW 100 125 125 160 80 230 485 25
0,55/0,66 kW
3000/3600
90 112 115 138 71 225 461 23
0,75/0,9 kW
100125 125 160 80 230 485
25
1,1/1,3 kW 26
1,5/1,8 kW140
130182 90 10 236
502 30
2,2/2,6 kW 125 155 517 33
3,0/3,6 kW140
160175
200 100 11 243 547 36
4,0/4,8 kW 190 235 112 12 250 564 45
-
8
Compact pumpsSeries EBP, LD/S, ME
Dimensional drawing EBPI 32-100, EBPI 40-125, EBPI 50-125 and EBPI 65-160 with motor IP 55
~k~a
DND
DNS
~b1~b2
h2h1
h
Type Motor min-1 DNS DND ~a ~b1 ~b2 h h1 h2 ~k kg
EBPI 32-100
0,12/0,14 kW 1500/1800
32(a) 32(a) 70 70
100
220 110 110
235
18,5
0,18/0,21 kW
3000/3600
18,5
0,25/0,3 kW 19
0,37/0,44 kW110 256
20
0,55/0,66 kW 21
EBPI 40-125
0,12/0,14 kW
1500/1800
40 40 73 82
108
250 137,5 112,5
26318,5
0,18/0,21 kW 19
0,25/0,30 kW 119 270 22
0,25/0,30 kW
3000/3600
108 263 19
0,37/0,44 kW119 270
20,5
0,55/0,66 kW 21
0,75/0,90 kW128 297
24,5
1,10/1,32 kW 25
EBPI 50-160
0,25/0,3 kW
1500/1800
50 50 82 103
108
340 170 170
48833,5
0,37/0,44 kW 36
0,55/0,66 kW119 512
36,5
0,75/0,90 kW 37,5
1,10/1,32 kW 128 529 43,5
0,75/0,90 kW
3000/3600
119 51236
1,10/1,32 kW 36,5
1,5/1,8 kW128
529 42,5
2,2/2,6 kW 544 44,5
3,0/3,6 kW 166 574 49
4,0/4,8 kW170 591
55,5
5,5/6,6 kW 71,5
EBPI 65-160
0,25/0,3 kW
1500/1800
65 65 82 103
108
340 170 170
48833,5
0,37/0,44 kW 36
0,55/0,66 kW119 512
36,5
0,75/0,90 kW 37,5
1,10/1,32 kW128
529 43,5
1,5/1,8 kW 544 45,5
2,2/2,6 kW 166 574 50,5
1,5/1,8 kW
3000/3600
128529 42,5
2,2/2,6 kW 544 44,5
3,0/3,6 kW 166 574 49
4,0/4,8 kW170 591
55,5
5,5/6,6 kW 71,5
(a) Flanges DN 40 - PN 6, DN 40 - PN 16, resp. are available on request. Other dimensional drawings on request. The weights are for the material execution Y103.
Flansche/Brides
DN PN D k d4Löcher/Trous
d1 Anz./nom.
32 16 140 100 78 19 M16 4
40 6 140 100 80 15 M12 4
40 16 150 110 88 19 M16 4
50 16 185 125 102 18 M16 4
65 16 185 145 122 18 M16 8 (+4)
K
d4
-
9
Compact pumpsSeries EBP, LD/S, ME
Type Motor min-1 DNS DND ~a ~b1 ~b2 h h1 h2 ~k kg
EBPNI 32-100
0,12/0,14 kW 1500/1800
32(a) 32(a) 70 70
100
220 110 110
260
21,5
0,18/0,20 kW
3000/3600
21,5
0,25/0,29 kW 22
0,37/0,43 kW110 286
23,5
0,55/0,63 kW 24,5
EBPNI 40-125
0,12/0,14 kW
1500/1800
40 40 73 82
108
250 137,5 112,5
28821,5
0,18/0,20 kW 22
0,25/0,29 kW 119 300 25,5
0,25/0,29 kW
3000/3600
108 288 22
0,37/0,43 kW119 300
24
0,55/0,63 kW 24,5
0,75/0,86 kW128 337
29,5
1,10/1,27 kW 30
EBPNI 50-160
0,25/0,3 kW
1500/1800
50 50 82 103
108
340 170 170
51136,5
0,37/0,44 kW 39
0,55/0,66 kW119 542
41,5
0,75/0,90 kW 42,5
1,10/1,32 kW 128 569 50,5
0,75/0,90 kW
3000/3600
119 54241
1,10/1,32 kW 41,5
1,5/1,8 kW128
569 49,5
2,2/2,6 kW 584 51,5
3,0/3,6 kW 166 624 60
4,0/4,8 kW170 641
66,5
5,5/6,6 kW 82,5
EBPNI 65-160
0,25/0,3 kW
1500/1800
65 65 82 103
108
340 170 170
51136,5
0,37/0,44 kW 39
0,55/0,66 kW119 542
41,5
0,75/0,90 kW 42,5
1,10/1,32 kW128
569 50,5
1,5/1,8 kW 569 52,5
2,2/2,6 kW 166 584 61,5
1,5/1,8 kW
3000/3600
128569 49,5
2,2/2,6 kW 584 51,5
3,0/3,6 kW 166 624 60
4,0/4,8 kW170 641
66,5
5,5/6,6 kW 82,5
(a) Flanges DN 40 - PN 6, DN 40 - PN 16, resp. are available on request. Other dimensional drawings on request. The weights are for the material execution Y103.
Dimensional drawing EBPNI 32-100, EBPNI 40-125, EBPNI 50-125 and EBPNI 65-160 with motor IP 55
EBPI 32-100 in schock proved execution
-
10
Compact pumpsSeries EBP, LD/S, ME
Dimensional drawing LD/S 26, LD/S 40, LD/S 60, LD/S 80, ME 90/6, ME 500/12 and ME 950/10 with motor IP 55
ME 90/6LD/S 40LD/S 60LD/S 80
LD/S 26ME 500/12ME 950/10
e1
b1f1
ø s1
a1
a1
e1ø s
1
b1f1
x
x
b4
b
h2
h1
b3
b
h2
h1
h3
h3
a
a ~k
~k
b4
g1
g1
Execution with hose connection
ab
Execution -G with threaded connection
DND ø
DNS ø
DNS
DNS
DND
DND
Type Motor min-1 KK(a) DNS DND a b a1 b1 b3 b4 e1 f1 g1 h1 h2 h3 ~k s1 x kg
ME 90/6 0,18 kW
3000/3600
links AG ½ AG ½ 51 21 80 100 63 109 100 125 125 63 79 63 212 7 69 6,5
LD/S 260,25 kW links
40 4028 55 90 112 73 119 115 138 141 71 102 73 277 7 120 10,5
LD/S 26-G AG 1¼ IG 1
LD/S 400,55 kW links
50 4038 67 90 112 75 119 115 138 141 71 125 77 293 7 118 14
LD/S 40-G IG 1¼ IG 1¼
LD/S 601,10 kW links
50 4038 67 100 125 75 119 125 156 159 80 125 77 338 9 123 18,5
LD/S 60-G IG 1¼ IG 1¼
LD/S 801,50 kW links
60 5036 60 100 125 78 119 125 156 159 80 127 82 351 9 122 23,5
LD/S 80-G IG 1½ IG 1¼
ME 500/123,00 kW oben
63 6367 87 125 140 120 110 155 170 176 90 125 112,5 332 10 109 34
ME 500/12-G IG 2 IG 1½
ME 950/105,50 kW rechts
75 6375 87 140 190 170 111 176 226 222 112 125 112,5 407 12 123 55
ME 950/10-G IG 2½ IG 2
(a) Position of terminal box seen onto fan. Other motor ratings / pump versions are available on request.
h2
-
11
Compact pumpsSeries EBP, LD/S, ME
Dimensional drawing ME 110/40 with motor IP 55
ab
b4
DNDDNS
~L
h2
h1
x a1 s1
e1
b1
f1
Type Motor min-1 KK(a) DNS DND a b a1 b1 b4 e1 f1 h1 h2 s1 x ~L kg
ME 110/40
0,37 kW 1500/1800
links IG ¾“ IG ¾“ 35 60
90 112 110 115 138 71
100
7 67 269 11
1,1 kW 3000 100 125 119 125 156 80 9 72 293 18
2,2 kW 3600 125 140 130 155 170 90 10 78 325 25
(a) Position of terminal box seen onto fan. Other motor ratings / pump versions are available on request.
EBP 40-200 material duplex, high pressure execution for
system pressure 80 bar
-
12
Compact pumpsSeries EBP, LD/S, ME
EBP for mobile useage
Examples for special executions
EBP with hydraulic motor
EBPL with free shaft end
DNS
DND
DNS
DND
-
13
Compact pumpsSeries EBP, LD/S, ME
Exploded view EBP 20-125, 25-160 and 25-200
Exploded view EBPI 32-100, 40-125, 50-160 and 65-160
Part-No. Description
101.10 Inline casing
102.10 Casing
161.10 Casing cover
230.10 Impeller
433.10 Mechnical seal
801.10 Motor with special shaft
-
14
Compact pumpsSeries EBP, LD/S, ME
Exploded view EBPN 20-125, 25-160 and 25-200
Exploded view EBPNI 32-100, 40-125, 50-160 and 65-160
Part-No. Description
101.10 Inline casing
102.10 Casing
161.10 Casing cover
230.10 Impeller
433.10 Mechanical seal
211.10 Stub shaft
515.10 Fixing ring
800.10 Standard motor
-
15
Compact pumpsSeries EBP, LD/S, ME
Exploded view EBP 20-90 and EBP 25-125-2
Part-No. Description
101.10 Casing
106.10 Suction casing
107.10 Discharge casing
161.10 Casing cover
230.10 / 11 Impeller
433.10 Mechanical seal
801.10 Motor with special shaft
-
16
Compact pumpsSeries EBP, LD/S, ME
Exploded view LD/S 26, LD/S 40, LD/S 60, LD/S 80, ME 500/12 and ME 950/10
Part-No. Description
101.10 Casing
161.10 Casing cover
230.10 Impeller
433.10 Mechanical seal
801.10 Motor with special shaft
ME 950/10-G - 550-50 in standard execution with
electric motor 5,5 kW
-
17
Compact pumpsSeries EBP, LD/S, ME
Exploded view ME 110/40
Part-No. Description
101.10 Casing
161.10 Casing cover
230.10 Impeller
433.10 Mechanical seal
801.10 Motor with special shaft
ME 110 with 1,1 kW electric motor
-
Compact pumpsSeries EBP, LD/S, ME
Editi
on 0
2/20
17Sp
ecifi
catio
ns s
ubje
ct to
cha
nge
with
out n
otic
e