community planning & development addition and garage ......2020/10/20 · 201 w. colfax ave.,...
TRANSCRIPT
201 W. Colfax Ave., Dept. 205
Denver, CO 80202
720.865.2709 or [email protected]
Design Review Addition and Garage ChecklistDesign review is a collaborative process used to examine projects in designated historic areas or properties for architectural design and compatibility with the nearby historic built environment. Applications submitted for design review must be accompanied with specific information which adequately de-scribes or studies the proposal. To comply with the required submittal standards of Denver Landmark Preservation, submitted documentation shall clearly illustrate the existing conditions as well as any proposed alteration(s). For second-story additions use the Infill & 2nd Floor Additions checklist.
Submit this form, completed, with the required submittal documentation
Project Address:
The following is REQUIRED:q 1. Complete Application for Design Review
q 2. Site Plan
q 3. Elevation drawings of each proposed façade- Include height of nearby adjacent structures
q 4. Details of construction a. Window details depicting head, jamb, and sill details in section with profile measurementsb. Sample board(s) or cut-sheet(s) with building materials color, texture, and other details shown
q 5. Color photos of existing conditions
Please note: If the proposal includes demolition of an existing structure a separate demolition application will need to be approved.
Additional documentation may be required to adequately depict the project and its impact on a historic property or a historic district.
Review is based on a comparison of the proposal and the Secretary of the Interior’s Standards, Design Guidelines for Landmark Structures and Districts, Landmark Preservation Ordinance; Chapter 30 Revised Municipal Code and other applicable adopted guidelines. Landmark staff is not responsible for building or zoning review. Please submit plans to those agencies for comment.
Community Planning & Development
Addition and Garage Checklist
LEGAL DISCLAIMER: This Advisory should not be used as a substitute for codes and regulations. The applicant is responsible for compliance with all code, guideline
and/or rule requirements, whether or not described in this Advisory.
Landmark Preservation 5/19/15
q 6. Other: ________________________________________________________________________
LANDMARK CERTIFICATE OF APPROPRIATENESS – ApplicationDesign review for this project will not begin until a complete application and required submittal materials are received. Landmark Preservation reserves the right to delay consideration and/or action on a submittal in the event that information is missing and/or changed at the time of the scheduled de-sign review or public hearing. Please use the appropriate project checklist for guidance. A pre-application review is required first for certain projects.
SUBJECT PROPERTY INFORMATION
Property Address
Property Type/Use q 1 or 2 Unit Building (Single Family Home, Duplex) Historic District
q Commercial
q Multi-Unit Residential q Other
Applicant Name: Street:
Company: City:
Phone: Zip:
ITEMIZED LISTING OF PROPOSED WORK ITEMS - only listed items will be reviewed:
[Example: Replace roof shingles, Construct 2-car detached garage, etc.] Only work listed below will be considered.
q
q
q
Materials of work:
(Example: Type of window materials, siding, roofing, etc.)
q
q
q
Amount of demolition of original features/materials
q square feet
APPLICATIONS ARE NOT CONSIDERED COMPLETE UNTIL ALL INFORMATION REQUIRED ON THE APPROPRIATE SUBMITTAL CHECKLIST IS SUBMITTEDI attest that no additional exterior work or window work will occur under this application (sign, and print application).
Design Review Deadline: The filing deadline is 4 weeks prior to scheduled Landmark Preservation Commission (LPC) meetings, and 23 days (3 weeks and 2 days) prior to the first Thursday of each month for the Lower Downtown Design Review Board (LDDRB). A complete application, including full supporting documentation, is due in the Landmark Preservation office by 12:00pm (noon) on the filing deadline. Landmark staff will determine whether LPC or LDDRB review is required based on adopted design guidelines. Staff will contact the applicant regarding staff comments, meeting dates (if applicable) and any additional materials that may be required.To submit electronically: Email this form and supporting materials to [email protected]. Electronic submission should include two attachments: one pdf with the completed form (“yourname-app.pdf”) and one pdf that combines all supporting materials (“yourname-app-materials.pdf”). File size should not exceed 25MB combined. Contact us if you are having trouble with your electronic submission.To submit in person: Submit this form and supporting materials to the Records Counter weekdays between 7:30am and 4:30pm on the 2nd floor of the Webb Munici-pal Building, 201 W. Colfax Ave.
All submittals become the property of the City & County of Denver. Submittals are open records.
Submittals will be posted online or made available to any party that requests a copy. 201 W. Colfax Ave., Dept. 205Denver, CO 80202
720.865.2709 or [email protected]
Landmark Preservation
Community Planning & Development
Application
3/15/16
q
q
q
350 Bannock Street – West Street View
350 Bannock Street – East Rear View
350 Bannock Street – South Side View
350 Bannock Street – South Side View
350 BANNOCK STREET – Streetscape Study
158 W. 4th Ave. 360 Bannock St. (Carriage House) 352 Bannock St.
32’‐0” +/‐ 19’‐0” +/‐ 21’‐6” +/‐
Minimum Block Height: 15’‐0”
Maximum Block Height: 32’‐0”
Proposed Project Height: 23’‐3.5”
350 BANNOCK STREET – Streetscape Study
350 Bannock St. 338 / 336 Bannock St. 328 Bannock St. 324 Bannock St.
23’‐3.5” +/‐ 15’‐0” +/‐ 20‐0” +/‐ 21’‐0” +/‐
350 BANNOCK STREET – Streetscape Study
314 Bannock St. 310 Bannock St. 306 Bannock St. 302 Bannock St.
28’-6” +/- 28’-6” +/- 29’-0” +/- 31’-0” +/-
SILL
Head, Sill Details
Drawn to Full Scale
Printed to 3" = 1' Scale
STACK DETAIL
3 9/16"
[91]
6 1
/1
6"
[1
54
]
JAMB
4 9
/1
6"
[1
16
]
1 3
/4
"
[4
5]
(T
YP
.)
4 1/8"
[105]
2 13/16"
[72]
STILE (TYP.)
1 1/16"
[27]
1 3/4"
[44]
1/2"
[13]
w/ Door Transom & Patio Door Drip Cap Nail Fin
SIERRAPACIFICWINDOWS
Aluminum Wood Sliding Patio Doorsw/ Door Transom Stack
3 5/8"
[91]
4 9
/1
6"
[1
16
]
JA
MB
D
EP
TH
5 1
1/1
6"
[1
44
]
1 1/4"
[33]
FRAME
7 3
/4
"
[1
97
]
3 3
/4
"
[9
6]
1 1
/4
"
[3
3]
3 5
/8
"
[9
2]
2 7
/8
"
[7
2]
HEAD
4 9/16"
[116]
6 1/8"
[156]
SILL 2 3/4"
[70]
HEAD
SILL
SILL
4 9/16"
[116]
6 1/8"
[156]
2 1/2"
[64]
3 1/16"
[78]
1 11/16"
[43]
Head, Sill Details
Drawn to Full Scale
Printed to 3" = 1' Scale
1/2
[12]
STACK DETAIL
Aluminum Wood Sliding Patio Doorsw/ Direct Set Window Stack
SIERRAPACIFICWINDOWS
French Sliding Patio Doorw/ Direct Set Stack & patio Door Drip cap Nail Fin
HEAD
SILL
SILL
Head, Sill & Jamb Details
Drawn to Full Scale
Printed to 3" = 1' Scale
4 13/16"
[122]
1 11/16"
[43]
6 9/16"
[166]
JA
MB
D
EP
TH
8 1/16"
[204]
4 15/16"
[125]
JAMB
JAMB
6 9/16"
[166]
8 1/16"
[204]
2 3/8"
[60]
2 3/8"
[60]
7/16"
[11]
STACK DETAIL
Aluminum Wood Sliding Patio Doorsw/ Fixed Casement Window Stack
1 3/4"
[44]
6 1/8"
[156]
JA
MB
D
EP
TH
7 11/16"
[195]
1 9/16"
[40]
SIERRAPACIFICWINDOWS
6 9/16" Jamb
Stack Intersection
Scale 3X
1/2"
1/4"
1/4" AluminumExterior Mull Connector
See Detail this Page
Stack Intersection
1/4" x 5" ALUMINUM
MULL PLATE BAR
APPLIED BY FACTORY
Standard Aluminum ExteriorTight Mull Connector
5/16"
[7mm]
5/16"
[7mm]
Scale 2X
Head, Sill Details
Drawn to Full Scale
Printed to 3" = 1' Scale
Aluminum Wood Sliding Patio Doorsw/ Fixed Casement Window Stack
SIERRAPACIFICWINDOWS
Fixed Casements with Patio Door Drip Cap Nail Fin
Tight Stack 1/4" Mull Plate Stack
1/4" Mull Plate Cover Detail
HEAD
SILL
SILL
7 9
/1
6"
[1
92
]
Head, Sill Details
Printed to 3" = 1' Scale
2"
[5
1]
4 1
/2
"
[1
15
]
4 9/16"
[116]
6 1/16"
[153]
STACK DETAIL
Aluminum Wood Sliding Patio Doorsw/ Direct Set Window w/ 2" Spread Stack
SIERRAPACIFICWINDOWS
HEAD
SILL
SILL
Head, Sill Details
Drawn to Full Scale
Printed to 3" = 1' Scale
2"
[51]
4 9/16"
[116]
6 1/16"
[153]
STACK DETAIL
Aluminum Wood Sliding Patio Doorsw/ Fixed Casement Window w/ 2" Spread Stack
SIERRAPACIFICWINDOWS
Architect Series® Designer Series® ProLine 450 Series
W-HG-91
DOUBLE-HUNG
Pella 2016 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
UNIT SECTIONS
Aluminum-Clad Exterior
[36]
1 7/
16"
[29]1 3/16"
[31]1 1/4"
FRAME WIDTH
[41]
1 5/
8"[4
2]1
5/8"
[26]1"
[63]2 1/2"
[41]1 5/8"
FRAME WIDTH
FRA
ME
HE
IGH
T
[127
]5"
Installation FinOptional Fold-out
[26]1"
[19]3/4"
[63]2 1/2"
[29]1 3/16"
VENT
[19]3/4"
[31]1 1/4"
[41]
1 5/
8"[3
2]1
1/4"
[19]
3/4"
[39]
1 9/
16"
[94]
3 11
/16"
[33]
1 5/
16"[7
6]3"[3
6]1
7/16
"[4
9]1
15/1
6"
[33]1 5/16"
[29]
1 1/
8"
[94]3 11/16"
CR
VS
VH
UJ
LJ
CHECK RAILCR
VS VENT SILL
VH VENT HEAD
LOWER JAMBSLJ
UPPER JAMBSUJ
Scale 3" = 1' 0"
All dimensions are approximate.
Architect Series® Designer Series® ProLine 450 Series
W-HG-92
DOUBLE-HUNG
Pella 2016 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
UNIT SECTIONS
Aluminum-Clad Exterior
FRAME WIDTH
FRA
ME
HE
IGH
T
[44]
1 11
/16"
[44]
1 11
/16"
[44]1 11/16"
[44]1 11/16"
FRAME WIDTH
FRA
ME
HE
IGH
T
[37]
1 7/
16"
[37]1 7/16"
[62]2 7/16"
[19]3/4"
TRANSOMS
[19]
3/4"
[33]
1 5/
16"
[94]
3 11
/16"
[19]3/4"
Installation FinOptional Fold-out
[19]
3/4"
[127]5"
Installation FinOptional Fold-out
[35]
1 3/
8"
[19]3/4"
[37]1 7/16"
[62]2 7/16"
[94]
3 11
/16"
[33]
1 5/
16"
FIXED
[37]
1 7/
16"
[62]
2 7/
16"
[62]
2 7/
16"
[19]
3/4"
[19]3/4"
VENT / VENTVERTICAL JOINING MULLION
TRANSOM / VENTHORIZONTAL JOINING MULLION
VENT / FIXEDVERTICAL JOINING MULLION
TJ
FJ
TS
FS
TH
FH
TRANSOM JAMBTJ
FJ FIXED JAMB
TRANSOM SILLTS
FS FIXED SILL
TRANSOM HEADTH
FH FIXED HEAD
Scale 3" = 1' 0"
All dimensions are approximate.
See www.PellaADM.com for mullion limitations and reinforcing requirements.
TYPICAL JOINING MULLIONS