Communication between Atlas Copco Power Focus 6000 &Mitsubishi Q PLC through NT 50-CC-EN Gateway

1st check the your LAN IP -->

Scan for NT 50 Gateway

Firmware Download in NT 50 Gateway

After Downloading the Firmware the IP Address reset

Again the assign the IP 

Insert the GSDML File for PF_6000

Go to Network =>Import Device Description and open the GSDML file

Input/Output Module configuration in NT 50

CC-Link Settings

Profinet IO Settings

Signal Mapping -

Online diagnostics in Sycon-

Data received in diagnostic window – Secondary Transmit

CC –link setting in Mitsubishi PLC

Data mapping in PF 6000 controller –

This Application Note has been provided by Hilscher India