committed to american manufacturing, wholesale ... to american manufacturing, wholesale...
TRANSCRIPT
Committed to American Manufacturing, WholesaleDistribution, and Professional Installation.
www.bradfordwhite.com
Bradford White’s MAGNUM Series® is an extensive line of commercial
water heaters that are used by specifiers, architects, engineers,
mechanical contractors, and building owners for practically every type
of commercial installation. This all-inclusive line provides solutions to
the multitude of challenges faced when specifying, buying, and installing
commercial water heating products.
Most importantly, the water heaters showcased in this catalog incorporate
features and design characteristics that result in greater durability, more
reliable and energy efficient performance, exceptional installation flexibility,
and cost savings.
Hotels, motels, restaurants, medical centers, schools, universities, public
buildings, apartments, health clubs, stadiums, prisons, office buildings,
shopping centers, laundromats, and more - no matter what the call for
hot water, there’s a MAGNUM Series® solution.
THE SOLUTION
Committed to American Manufacturing, Wholesale Distribution, and Professional Installation.
COMMERCIAL GAS MODELS
Light Duty Atmospheric Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Light Duty Power Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Light Duty High Input Direct Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Light Duty Power Direct Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Ultra Low NOx Atmospheric Vent Commander Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
ASME & Non-ASME Atmospheric Vent Electronic Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ASME & Non-ASME Millivolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
ASME & Non-ASME Ultra High Efficiency eF SERIES® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
ASME & Non-ASME Electronic Ignition Induced Draft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
COMMERCIAL ELECTRIC MODELS
ElectriFLEX™ LD Light Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ElectriFLEX™ MD Medium Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
MII Surface Mounted Thermostats and Immersion Thermostats with Contactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
ASME Immersion Thermostats with Contactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
KwickShot® Tankless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
COMMERCIAL INDIRECT MODELS
PowerStor Series® Single Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PowerStor Series® SS (Stainless Steel) Single Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
COMMERCIAL STORAGE TANKS
Small Volume Jacketed and Insulated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Large Volume Jacketed and Insulated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Large Volume Unjacketed and Uninsulated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Sprayed-On Rigid Polyurethane Foam (SPF) with Acrylic Topcoat (Outdoor Installations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-27
www.bradfordwhite.com
Built to be the Best™
Bradford White ICON System™ Intelligent Gas ControlBradford White’s exclusive gas control technology offers numerous benefits including Advanced
Temperature Control for consistent and accurate water temperature levels, Performance
Software for enhanced First Hour Delivery ratings and tighter temperature differentials, Intelligent
Diagnostics to assist in troubleshooting, and Pilot-On-Indication. The ICON System™ is another
competitive advantage for specifiers, professional installers, and wholesalers. Best of all, it’s
provided at no extra cost.
Bradford White ICON HD™ Integrated Commercial Control SystemBradford White’s ICON HD™ is an intelligent integrated control that offers improved
reliability and reduced downtime. It combines temperature control, diagnostic codes,
and system functions and status into a single digital LCD interface. Available only from
Bradford White, it comes standard on our entire line of heavy duty electronic ignition
commercial water heaters.
Hydrojet® Total Performance SystemThe Hydrojet® Total Performance System is a cold-water inlet tube engineered to reduce costly
sediment buildup, create more thorough mixing of incoming water with stored water, and reduce
extreme temperature differences throughout the tank. Water heaters with the Hydrojet® Total
Performance System don't have to work as hard or as often to maintain a maximum supply of
hot water at the desired temperature. They heat water faster and use less energy to do it.
The Defender Safety System® and Eco-Defender Safety System®
The Defender Safety System® and Eco-Defender Safety System®
are proven combustion technologies that resist the ignition of
flammable vapors outside the water heater. They offer outstanding
efficiency and a long service life while providing virtually maintenance-
free operation. The Eco-Defender uses a radiant burner
and an advanced control to cut normal NOx emission
by 75% over standard models.
INNOVATION AN
Committed to American Manufacturing, Wholesale Distribution, and Professional Installation.
RightSpec® Commercial Product Sizing ProgramWhen the industry needed a tool to make sure it sized the right water heater
for the job, Bradford White brought out the first user-friendly electronic sizing
program. It is the most comprehensive and intuitive program of its kind. You
get real time solutions to any commercial installation and more. You can feel
confident that when you use RightSpec®, you are specifying it right the first
time! Specifiers can also find Revit drawings of our commercial products on Autodesk® Seek and SmartBIM®.
Phone AppsBradford White's RightSpec® Cross Reference, Warranty Check, and eF
Series® Efficiency Calculator Apps are available for both Android™ and
iOS platform devices. They are intuitive and easy-to-use and help save
valuable time in the field. Visit Bradfordwhite.com for full details and
download links.
24/7 Technical Support CenterExpert support, 24 hours a day, 7 days a week. Our Technical Service and Warranty
Support personnel are U.S.-based, right inside our Technical Support facilities in
Middleville, Michigan. Each technician goes through a rigorous training program before
they take your call. Call Technical Support at 800-334-3393 and Warranty Support at
800-531-2111.
iTEC® – The International Technical Excellence CenterBradford White’s International Technical Excellence Center (iTEC) is an 18,500 sq. ft. state-
of-the-art LEED certified training facility located adjacent to the company’s manufacturing
facilities in Middleville, MI. The iTEC facility hosts product and sales training
events throughout the year for contractors, engineers, wholesale distributors,
and sales representatives from across the United States and Canada.
Certified Low LeadBradford White recognizes that our products are an integral part of a residential or commercial
water system. We have, therefore, voluntarily had our products tested and certified by CSA
International to the federal low lead requirements of the Safe Drinking Water Act.
ND RESOURCES
www.bradfordwhite.com
Built to be the Best™
Light Duty Atmospheric VentLight Duty Atmospheric Vent models are perfect for smaller commercial applications that require more recovery than a
residential water heater, but not as much as a larger commercial unit. Each of these models combines energy-saving
performance with the durability to withstand the day-to-day demands of commercial water heating. Light Duty
Atmospheric Vent models are also available in Ultra Low NOx Eco-Defender Safety System® versions.
For additional specifications and/or limitations, please see the installation manual for this product.All specifications are subject to change without notice.*Based on manufacturers rated recovery efficiency.
ModelNumber
Approx.ShippingWeight
lbs.
Floor toVent
Conn.
in.
JacketDia.
in.
Capacity Input Recovery at100°F Rise*
LG250H653NLG155H803NLG275H763NLG2100H853N
U.S.Gal.
485575100
Nat.BTU/Hr.
65,00080,00076,00085,000
LPBTU/Hr.
61,00078,00076,00088,000
Nat.U.S.GPH
63787482
LPU.S.GPH
59767485
60591/2
625/8
69
193207263424
222224
281/4
VentSize
in.
4444
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.29316
GAS MODELSSTANDARD FEATURES*
• ICON System™ Control
• Defender Safety System®
(50-gallon model only)
• Hydrojet® Total Performance System
• Vitraglas® Lining
• Max-Temp - 180˚F
• NSF Construction Available
• Side Connections
• Factory-Installed Heat Traps
• Snap Lock Draft Diverter
• Protective Magnesium Anode Rod
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty–can beupgraded to 5–Year at additional cost
APPLICATIONS
Fast food restaurants and office buildings
*Full descriptions are available in glossary beginning on page 25.
Specifications
7
Light Duty TTW® Power VentLight Duty TTW® Power Vent units are perfect for applications where installation flexibility is as important as meeting
hot water demands. Power vented for positive exhaust, these units can be vented horizontally and vertically up to
180 feet. These extremely long vent lengths solve difficult ventilation challenges. Light Duty Power Vent models are
also available in Ultra Low NOx versions.
STANDARD FEATURES*
• ICON System™ Control
• Defender Safety System®
(50-gallon models only)
• Electronic Ignition
• Powerful and Quiet Blower Motor
• Horizontal and Vertical Venting with PVC, ABS, or CPVC
• Hydrojet®2 Total Performance System
• Vitraglas® Lining
• ¾” NPT Dielectric Waterway Fittings
• Factory-Installed Heat Traps
• Max Temp - 180˚F
• NSF Construction Available
• Side Connections
• Protective Magnesium Anode Rod
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can be upgraded to 5–Year at additional cost
APPLICATIONS
Fast food restaurants and office buildings
*Full descriptions are available in glossary beginning on page 25.
ModelNumber
Approx.ShippingWeight
lbs.
Floor toVent
Conn.
in.
JacketDia.
in.
Capacity Input Recovery at100°F Rise*
LG2PV50H653NLG1PV55H783NLG2PV75H763N
U.S.Gal.
485575
Nat.BTU/Hr.
65,00078,00076,000
LPBTU/Hr.
58,00078,00075,500
Nat.U.S.GPH
637674
LPU.S.GPH
567673
661/8
643/16
697/16
186253252
222226
VentSizeMin.
in.
333
For additional specifications and/or limitations, please see the installation manual for this product.All specifications are subject to change without notice.*Based on manufacturers rated recovery efficiency.
Specifications
ModelNumber
Approx.ShippingWeight
lbs.
Floor toCenterLine ofVentin.
JacketDia.
in.
Capacity Recovery at100°F Rise*
LG2DV50H503N
U.S.Gal.
48
Nat.BTU/Hr.
Input
50,000
LPBTU/Hr.
48,000
Nat.U.S.GPH
47
LPU.S.GPH
45 725/16 min. 21722
VentSize
in.
4/6
Specifications
Light Duty Direct VentLight Duty Direct Vent models are the solution for airtight
installations. Utilizing a closed combustion and co-axial
concentric (pipe inside a pipe) direct venting system, they are
perfect for installations that lack sufficient air for combustion.
They require no electrical power yet still offer sidewall venting. For installation flexibility, venting options include a solid
telescoping extension that can accommodate up to eight feet vertically and eight feet horizontally and a flexible vent
kit that allows installations from 44” to 100” in total length. Light Duty High Input Direct Vent models are also available
in Ultra Low NOx Eco-Defender Safety System® versions.
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.2931
8
STANDARD FEATURES*
• ICON System™ Control
• Defender Safety System®
• No Electric Power Necessary
• Telescoping Solid Vent and Flexible VentKits Available
• Hydrojet® Total Performance System
• Vitraglas® Lining
• ¾" NPT Dielectric Waterway Fittings
• Factory-Installed Heat Traps
• Max Temp - 180˚F
• Cast Aluminum Air Intake Boot
• Pedestal Base
• Side Connections
• Protective Magnesium Anode Rod
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• 2" Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Beauty salons, small utility rooms, and closet installations
*Full descriptions are available in glossary beginning on page 25.
GAS MODELS
For additional specifications and/or limitations, please see the installation manual for this product.All specifications are subject to change without notice.*Based on manufacturers rated recovery efficiency.
For additional specifications and/or limitations, please see the installation manual for this product. Allspecifications are subject to change without notice.*Based on manufacturers rated recovery efficiency.
ModelNumber
Approx.ShippingWeight
lbs.
Floor toVent
Conn.
in.
JacketDia.
in.
Capacity Input Recovery at100°F Rise*
LG2PDV50H603NLG2PDV75H803N
U.S.Gal.
4875
Nat.BTU/Hr.
60,00080,000
LPBTU/Hr.
60,00078,000
Nat.U.S.GPH
5877
LPU.S.GPH
5876
6972
205392
2226
VentSize
in.
3 or 43 or 4
Specifications
9
Light Duty Power Direct Vent
Light Duty Power Direct Vent models are the solution for installations that lack sufficient combustion air or where
an outside wall for ventilation is not readily accessible. All models can vent vertically or horizontally and are also
approved for unbalanced, direct-vent closed combustion applications. Unbalanced venting means the air intake
pipe doesn't have to be vented on the same external building surface as the exhaust vent. Light Duty Power
Direct Vent models are also available in Ultra Low NOx Eco-Defender Safety System® versions.
STANDARD FEATURES*
• ICON System™ Control
• Defender Safety System®
(50-gallon model only)
• Electronic Ignition
• Closed Combustion Venting System
• Powerful Blower Motor
• Horizontal and Vertical Venting with PVC, ABS, or CPVC
• Optional Concentric Vent Terminal Kit
• Hydrojet® Total Performance System
• Vitraglas® Lining
• Max Temp - 180˚F
• NSF Construction Available
• ¾" NPT Dielectric Waterway Fittings
• Side Connections
• Protective Magnesium Anode Rod
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Office buildings, small apartments, and motels
*Full descriptions are available in glossary beginning on page 25.
10
Ultra Low NOxAtmospheric VentCommander Series™
The Commander Series™ of atmospherically vented, Ultra Low NOx
water heaters offers class leading features from top to bottom. First
is its overall compact design. The smaller footprint and shorter height
allow installation in tighter spaces or where existing venting restricts
vertical space. An advanced down-fired, premix power burner
automatically regulates for optimum combustion and efficiency.
With 82% thermal efficiency and the ICON HD™ Commercial Control
System, The Commander Series™ is an excellent solution for an
unlimited number of commercial gas installations.
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.2931
GAS MODELSSTANDARD FEATURES*
• 82% Thermal Efficiency
• ICON HD™ Commercial Control System
• Direct Spark Ignition
• Two Pass Heat Exchanger System
• Pre-Mix Power Burner
• Submerged Combustion Chamber
• Hydrojet® Sediment Reduction System
• Vitraglas® Lining
• Zero Inch Clearance to Combustibles
• Integrated Exhaust System
• Optional Air Intake Ducting
• Hand Hole Cleanout
• Max Temp - 180˚F
• NSF Construction Available
• 1 ½” NPT Dielectric Waterway Fittings
• Top and Side Water Connections
• Complies with Current Ultra Low NOxRequirements
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed – Built-inAlternate T&P Location
• Three Protective Magnesium Anode Rods
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Apartments, hotels, schools, and restaurants
*Full descriptions are available in glossary beginning on page 25.
For additional specifications and/or limitations, please see the installation manual for this product. All specifications aresubject to change without notice.*Based on manufacturers rated recovery efficiency.
ModelNumber
Approx.ShippingWeight
lbs.
Floor toVent
Conn.
in.
JacketDia.
in.
Capacity Input Recovery GPH at Degree Rise*
UCG-100H-199-3NUCG-100H-270-3NUCG-100H-399-3N
U.S.Gal.
10010098
Nat./LPBTU/Hr.
199,999270,000399,999
40˚F
493665994
100˚F
197266398
140˚F
141190284
731/4
731/4
771/4
632632657
281/4
281/4
281/4
ThermalEfficiency
82.082.082.0
Specifications
11
ASME & Non-ASME Atmospheric Vent Electronic Ignition
ASME and Non-ASME Atmospheric Vent Electronic Ignition models, featuring the ICON HD™ Commercial Control
System, provide solutions to applications with various demands for hot water. With capacities ranging from 38 – 100
gallons and with inputs from 125,000 - 505,000 BTU/Hr., there’s a model that will meet most any requirement. Power
Vent kits are available for all models.
STANDARD FEATURES*
• ICON HD™ Commercial Control System
• Electronic Ignition
• Hydrojet® Sediment Reduction System
• Vitraglas® Lining
• Max Temp - 180˚F
• Energy Cut-Off (E.C.O.)
• Hand Hole Cleanout
• NSF Construction Available
• ASME Construction Available on allModels over 199,999 BTU/Hr.
• 1 ½" NPT Dielectric Waterway Fittings
• Low NOx Models Available
• Protective Magnesium Anode Rod
• T&P Relief Valve Installed
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Apartments, cafeterias, and restaurants
*Full descriptions are available in glossary beginning on page 25.
A S M E
HLW
ModelNumber
Approx.ShippingWeight
lbs.STD. ASME
Floor toVent
Conn.
in.
JacketDia.
in.
Capacity Recovery GPH atDegree Rise*
D-38T-155-3N+D-75T-125-3ND-75T-160-3ND-80T-180-3ND-80T-199-3ND-80T-250-3N(A)D-100T-199-3ND-100T-250-3N(A)D-75T-300-3N(A)D-65T-370-3N(A)D-65T-399-3N(A)**D-80T-425-3N(A)D-80T-505-3N(A)D-100S-199-3ND-100S-250-3N(A)D-100L-199-3ND-100L-250-3N(A)D-100L-270-3N(A)**D-100L-300-3N(A)D-80L-399-3N(A)D-80L-450-3N(A)D-80L-505-3N(A)
U.S.Gal.
38757580808098987565658080100100100100100100808080
Input
Nat.BTU/Hr.155,000125,000160,000180,000199,999250,000199,999250,000300,000370,000399,999425,000505,000199,999250,000199,999250,000270,000300,000399,999450,000505,000
LPBTU/Hr.155,000125,000155,000180,000199,999235,000199,999235,000300,000370,000399,999425,000505,000199,999250,000199,999250,000270,000300,000375,000425,000475,000
40°F
3763033894364856064856067278979701030117848560648560665572797010911224
100°F
150121155175194242194242291359388412489194242194242262291388436489
140°F
10786111124139173139173208256277294337139173139173187208277312350
51721/4721/4717/8717/8713/8833/8833/8743/8731/4731/4823/4823/4763/4763/4757575
753/8711/26969
438520520540540540610610590665665750750667667725725725725800800800
–––––
590–
690645720720800800–
702–
765765765835835835
281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4301/4301/4301/4301/4301/4301/4301/4
VentSize
in.
65666666788101066666781010
For additional specifications and/or limitations,please see the installation manual for thisproduct. All specifications are subject tochange without notice.*Based on manufacturers rated recovery efficiency.
Specifications
ASME & Non-ASME MillivoltASME & Non-ASME models with Millivolt technology provide high-powered performance while making installations
easier and less complicated. Using self-generated power from the pilot and thermopile assembly to operate the flue
damper, there’s no need to hard wire one for electricity or to locate it near an outlet. The continuous pilot ignition system
eliminates “lockout” situations and utilizes a simplified control system for easier operation.
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.293112
GAS MODELSSTANDARD FEATURES*
• Millivolt Powered Ignition – No externalelectric source is required for water heater operation
• Hydrojet® Sediment Reduction System
• Vitraglas® Lining
• Max Temp - 180°F
• Energy Cut-Off (E.C.O.)
• Hand Hole Cleanout
• NSF Construction Available
• ASME Construction Available on allModels over 199,999 BTU/Hr.
• 1 ½" NPT Dielectric Waterway Fittings
• Low NOx Models Available
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Protective Magnesium Anode Rod
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Hotels, dairy barns, and campgrounds
*Full descriptions are available in glossary beginning on page 25.
For additional specifications and/or limitations, please see the installation manual for this product. All specifications are subject tochange without notice.*Based on manufacturers rated recovery efficiency.
ModelNumber
Approx.ShippingWeight
lbs.STD. ASME
Floor toVent
Conn.
in.
JacketDia.
in.
Capacity Recovery GPH atDegree Rise*
DM-38T-155-3NDM-75T-125-3NDM-75T-160-3NDM-80T-180-3NDM-80T-199-3NDM-80T-250-3N(A)DM-100T-199-3NDM-100T-250-3N(A)DM-100L-199-3NDM-100L-250-3N(A)DM-100L-270-3N(A)*DM-100S-199-3NDM-100S-250-3N(A)
U.S.Gal.
3875758080809898100100100100100
Nat.BTU/Hr.
Input
155,000125,000160,000180,000199,999250,000199,999250,000199,999250,000270,000199,999250,000
LPBTU/Hr.
155,000125,000155,000180,000190,000235,000199,999235,000199,999250,000
-199,999250,000
40°F
368303378436485606485606485606655485606
100°F
147121151175194242194242194242262194242
140°F
10786108124139173139173139173187139173
51721/4721/4723/8723/8723/8833/8833/8757575
763/4
763/4
438520520540540540610610725725725667667
-----
590-
690-
765765
-702
281/4
281/4
281/4
281/4
281/4
281/4
281/4
281/4
301/4
301/4
301/4
301/4
301/4
VentSize
in.
6566666666666
A S M E
HLW
Specifications
ASME & Non-ASME Ultra High Efficiency eF SERIES®
The eF Series® utilizes exclusive designs for unsurpassed reliability,
efficiency, installation flexibility, and quiet operation. All models can
vent vertically or horizontally and are approved for unbalanced,
direct-vent closed combustion applications or those applications
that require inside air for combustion. Unbalanced venting means
the air intake pipe doesn't have to be vented on the same external
building surface as the exhaust vent. Foam core pipe is also
permitted on the entire venting system. Last but not least, the
eF Series® is quiet, a feature building owners, managers, and
occupants will appreciate.
STANDARD FEATURES*
• ICON HD™ Commercial Control System
• Direct Spark Ignition
• Three Pass Heat Exchanger System
• Pre-Mix Power Burner
• Submerged Combustion Chamber
• Hydrojet® Sediment Reduction System
• Vitraglas® Lining
• Zero Inch Clearance to Combustibles
• Unbalanced Venting
• Optional Concentric Vent Terminal Kit
• Hand Hole Cleanout
• Max Temp - 180˚F
• NSF Construction Available
• ASME Construction Available
• 1 ½" NPT Dielectric Waterway Fittings
• Complies with Current Ultra Low NOxRequirements
• All Models Listed with California EnergyCommission
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Four Protective Magnesium Anode Rods,(EF-100T-399, has Two Powered AnodeRods and One Magnesium Anode Rod)
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Apartments, hotels, and commercial kitchens
*Full descriptions are available in glossary beginning on page 25.
13
(EF-60T-125E-3N,
EF-100T-150E-3N,
EF-100T-199E-3N,
EF-100T-250E-3N,
EF-100T-399E-3N)
A S M E
HLW
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity Recovery GPH atDegree Rise*
EF-60T-125E-3N(A)EF-60T-150E-3N(A)EF-60T-199E-3N(A)EF-100T-150E-3N(A)EF-100T-199E-3N(A)EF-100T-250E-3N(A)EF-100T-300E-3N(A)EF-100T-399E-3N(A)
U.S.Gal.
606060100100100100100
Nat./LPBTU/Hr.
Input
125,000150,000199,999150,000199,999250,000300,000399,999
40°F
3644235584505977358361127
100°F
145169223180239294335451
140°F
104121159129171210239322
575757
775/8
775/8
775/8
775/8
775/8
570570570900900900900950
281/4
281/4
281/4
281/4
281/4
281/4
281/4
281/4
For additional specifications and/or limitations, please see the installation manual for this product.All specifications are subject to change without notice.*Based on manufacturers rated recovery efficiency.
Specifications
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop of Heater
in.
JacketDia.
in.
Capacity Input
D-65T-625-3N(A)D-80T-725-3N(A)
U.S.Gal.
6580
Nat. and LPBTU/Hr. 625,000725,000
15151757
606703
433502
693/8
795/8
775880
281/4
281/4
VentSize
in.
88
Recovery GPH atDegree Rise*
40°F 100°F 140°F
ASME & Non-ASME Electronic Ignition Induced DraftBradford White's commercial Electronic Ignition Induced Draft models were developed in order to provide incredible
output and a great volume of hot water from a relatively small commercial water heater. They feature a smaller vent
diameter for ease of installation and an automatic flue damper to reduce standby loss and improve overall efficiency.
For additional specifications and/or limitations, please see the installation manual for this product. All specifications aresubject to change without notice.*Based on manufacturers rated recovery efficiency.
GAS MODELSSTANDARD FEATURES*
• ICON HD™ Commercial Control System
• Electronic Ignition
• Hydrojet® Sediment Reduction System
• Vitraglas® Lining
• Hand Hole Cleanout
• Max Temp - 180˚F
• NSF Construction Available
• ASME Construction Available
• 1 ½" NPT Dielectric Waterway Fittings
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Protective Magnesium Anode Rods
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Schools, prisons, and gymnasiums
*Full descriptions are available in glossary beginning on page 25.
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.293114
Specifications
ElectriFLEX™ LD Light DutyElectriFLEX™ LD (Light Duty) Commercial Electric models, with
their Upright, Lowboy, Utility, and Wall Hung configurations, fit
just about any location. These space-saving models are
perfect for lower demand commercial applications. All model
configurations are field convertible from three phase to single
phase and from non-simultaneous to simultaneous operation.
STANDARD FEATURES*
• Fully Automatic Controls
• Hydrojet® Total Performance System(Upright and Lowboy models only)
• Direct Heat Transfer with ImmersedElements
• Optional Voltage, Phase and kWConversion Kits Available
• Lowboy Models Provided with InsulationWrap
• Incoloy Elements Optional
• Vitraglas® Lining
• ¾" NPT Dielectric Waterway Fittings
• Low Restriction Brass Drain Valve (Uprightand Lowboy models only)
• T&P Relief Valve Installed
• Protective Magnesium Anode Rod
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Strip malls, gas stations, and fast food
restaurants
*Full descriptions are available in glossary beginning on page 25.
ELECTRIC MODELS
15
For additional specifications and/or limitations, please see the installation manual for this product. All specifications are subject to change without notice.*Based on manufacturers rated recovery efficiency.
Wall Hung Model Specifications
Utility Model SpecificationsUpright Model Specifications
Lowboy Model Specifications
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity Recovery at100°F Rise*
LE230S3-3LE240S3-3LE250S3-3LE265T3-3LE280T3-3LE2120T3-3
U.S.Gal.
3040506580
119
U.S.GPH
181818181818
467/8
467/8
461/2
591/4
591/4
623/4
85103130156183305
182022222428
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity Recovery at100°F Rise*
LE120L3-3LE130L3-3LE140L3-3LE150L3-3
U.S.Gal.
19304047
U.S.GPH
18181818
243/4
293/4
311/4
313/4
5886115140
18202224
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity Recovery at100°F Rise*
LE16U3-1LE110U3-1LE112T3-1LE115U3-1LE120U3-1
U.S.Gal.
610121519
U.S.GPH
66666
161/2
171/2
273/4
201/4
243/4
3348485559
1416141818
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity Recovery at100°F Rise*
LE16WV3-1LE112WV3-1LE120WV3-1
U.S.Gal.
61219
U.S.GPH
666
153/4
163/8
243/8
334859
141818
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.293116
For additional specifications and/or limitations, please see the installationmanual for this product. All specifications are subject to change withoutnotice.*Based on manufacturers rated recovery efficiency.
Recovery at 100°F
Rise*
747474
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity
E32-50S-3E32-80R-3E32-120R-3
U.S.Gal.
5080
119
461/2
5963
137190312
2224
281/4
208Volts
6912
13.51518
265-43942-13265-43942-14265-43942-15265-43942-16265-43942-17265-43942-18
240Volts
265-43942-07265-43942-08265-43942-09265-43942-10265-43942-11265-43942-12
480Volts
265-43942-01265-43942-02265-43942-03265-43942-04265-43942-05265-43942-06
ElementWattage
Kit Part NumbersRequiredTotal
Heater
kW
200030004000450050006000
ELECTRIC MODELSSTANDARD FEATURES*
• Fully Automatic Controls
• Hydrojet® Total Performance System
• Vitraglas® Lining
• 6-18 kW Inputs
• Incoloy Elements Standard
• Max Temp - 180˚F
• NSF Construction Available
• Direct Heat Transfer with ImmersedElements
• 1 ¼" NPT Dielectric Waterway Fittings
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Protective Magnesium Anode Rod
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Beauty salons, quick service restaurants, and
office buildings
*Full descriptions are available in glossary beginning on page 25.
ElectriFLEX™ MD Medium DutyElectriFLEX™ MD (Medium Duty) models are design certified by ETL (to UL standards) for field conversions.
This added benefit allows for easy, on-the-job-site conversions of voltage, phase, and kW inputs. Eighteen conversion
kits allow 54 model configurations. These units are available in gallon capacities of 50, 80, and 119 with factory inputs
ranging from 6-18 kW and provide the added input required by medium duty commercial applications.
Specifications Available Conversion Kits
For additional specifications and/or limitations, please see the installation manual forthis product. All specifications are subject to change without notice.
ModelNumber
STD.
Approx.Shipping Weight
lbs.
ASME
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity
M-II-50(A)-kW-3SCM-II-80(A)-kW-3SCM-II-120(A)-kW-3SC
U.S.Gal.
5080119
473/4
601/4
641/2
270335430
302378485
2426
301/4
Specifications
17
A S M E
HLW
kWInput
6912
13.51518242730364554
40°FTemperature Rise*
6293124140155186248279310372465558
50°F
507499112124149199223248298372447
60°F
41628393103124164186207248310372
70°F
3553718089106142160177213266319
80°F
314762707893124140155186233279
90°F
284255626983110124138165207248
100°F
25375056627499112124149186223
120°F
2131414752628393103124155186
140°F
182735404453718089
106133160
*Based on manufacturers rated recovery efficiency.
MII Surface MountedThermostats andImmersion Thermostats with Contactors
MII Energy Saver models set the standard in commercial electric water heaters. They’re available in an assortment
of capacities and inputs so professionals have the solutions to any challenge. Unprecedented standard features
like the Hydrojet® Sediment Reduction System ensure long-lasting, top performance.
STANDARD FEATURES*
• Fully Automatic Controls
• Single or Three Phase
• 208V, 240V, 277V, 380V, 415V, 480V, or600V
• Hydrojet® Sediment Reduction System
• Vitraglas® Lining
• ASME or Non-ASME with Surface (SF) orImmersion (CF) Thermostats
• 6-54 kW Inputs
• Incoloy Elements—Standard on ImmersionThermostat with Contactors (CF) Models;Optional on Surface Mount Thermostat(SF) Models
• Hand Hole Cleanout
• Max Temp - 180˚F
• NSF Construction Available
• 1 ½” NPT Dielectric Waterway Fittings
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Two Protective Magnesium Anode Rods
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
APPLICATIONS
Stadiums, cafeterias, restaurants, and beautysalons
*Full descriptions are available in glossary beginning on page 25.
GPH Recovery Capacities
For additional specifications and/or limitations, please see the installation manualfor this product. All specifications are subject to change without notice.
*Based on manufacturers rated recovery efficiency.
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.293118
A S M E
HLW
ASME ImmersionThermostats withContactorsThese commercial electric models are specifically constructed to
the ASME standard and offer inputs of up to 81 kW. They are
intended for supplying potable hot water to commercial and
industrial type applications and offer optional features to meet any
specification requirement.
ELECTRIC MODELSSTANDARD FEATURES*
• Immersion Type Thermostats for AccurateTemperature Control from Positive Off to180˚F
• Hydrojet® Sediment Reduction System
• Vitraglas® Lining
• 3 kW to 81 kW
• Incoloy Elements Standard
• 6 Gallon to 119 Gallon
• Hand Hole Cleanout (Except 6 & 12 GallonModels)
• Max Temp - 180˚F
• NSF Construction Available
• ASME Construction
• 1 ½" NPT Dielectric Waterway Fittings
• Low Restriction Brass Drain Valve
• T&P Relief Valve Installed
• Protective Magnesium Anode Rod(s)
• Non-CFC Foam Insulation
• 3–Year Limited Tank Warranty– can beupgraded to 5–Year at additional cost
OPTIONAL FEATURES:
• Low Water Cut-off
• Safety Door Interlock
• High and Low Pressure Limit Switches
• Alarm Horn
• Temperature and Pressure Gauge
• Time Delay Set-up Sequences (24 kW and Above)
APPLICATIONSSchools and government installations
*Full descriptions are available in glossary beginning on page 25.
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity Input
6A-kW-312A-kW-320A-kW-330A-kW-340A-kW-350A-kW-380A-kW-3120A-kW-3
U.S.Gal.
6122030405080119
171/4
28271/2
38481/4
473/4
601/4
641/2
MaximumkW39183636818181
83118145180220270335430
16162020202426
301/4
Specifications
kWInput
36912
13.5151824273036455481
40°FTemperature Rise*
316293124140155186248279310372465558852
50°F
25507499112124149199223248298372447671
60°F
2141628393103124164186207248310372558
70°F
183553718089106142160177213266319477
80°F
16314762707893124140155186233279418
90°F
14284255626983110124138165207248371
100°F
1225375056627499112124149186223334
120°F
102131414752628393103124155186278
140°F
9182735404453718089
106133160238
GPH Recovery Capacities
19
Single Point
KwickShot®
TanklessKwickShot® Tankless models are
compact and powerful enough to be
located at the point–of–use in a wide
variety of commercial applications.
STANDARD FEATURES*• Reduced Energy Waste – Flow Switch Activates Heater Only
on Demand (No Stand-by Heat Loss); 99% Efficient
• Continuous Hot Water
• No T&P Relief Valve Needed
• Integral Flow Restrictor
• Easy Installation – Mounts on Wall – No Sweat Connections
• Ni Chrome Heating Element - Reduces Calcification
• Space Saving Installation – Compact Size
• Field Serviceable Element – Replaceable Cartridge Element(1-year Warranty)
• Warranty – Heaters Are Designed for Durability andGuaranteed against Failure Due to Leaks of HeaterBody/Element Assembly for a Period of 10 Years
APPLICATIONSOffice buildings, apartments, motels, and strip malls
*Full descriptions are available in glossary beginning on page 25.
Thermostatic
Series Two
Flow Control
Series Three
Thermostatic Triple Module
ModelNumber
ES-3000-1-S-10ES-3500-1-S-10ES-3500-4-S-10ES-4100-2-S-10ES-4100-5-S-10ES-5500-4-S-10
kWRating
3.03.53.54.14.15.5
Voltage
120120240208277240
AMPS
25.029.014.619.714.822.9
414848565675
Temperature Rise °F0.5 GPM
RecommendedWire Size
10 AWG10 AWG14 AWG12 AWG14 AWG10 AWG
ModelNumber
EFT-7500-4-S-10EFT-9500-4-S-10
kWRating
7.59.5
Voltage240240
AMPS32.040.0
0.5 GPM——
0.75 GPM6886
1.0 GPM5165
1.5 GPM3443
2.0 GPM2532
Temperature Rise °F RecommendedWire Size
8 AWG8 AWG
ModelNumber
EFC-5500-4-S-10EFC-6500-4-S-10EFC-7500-4-S-10EFC-9500-4-S-10EFC-8300-2-S-10
kWRating
5.56.57.59.58.3
Voltage240240240240208
AMPS23.027.032.040.039.0
0.5 GPM7588———
0.75 GPM5059688676
1.0 GPM3844516557
1.5 GPM2530344338
2.0 GPM1822253229
Temperature Rise °F RecommendedWire Size10 AWG10 AWG8 AWG8 AWG8 AWG
ModelNumber
EFT-19000-4-D-10
kWRating19.0
Voltage240
AMPS80 (2x40)
1.5 GPM87
2.0 GPM65
2.5 GPM52
3.0 GPM43
Temperature Rise °F RecommendedWire Size
8 AWG per module
ModelNumber
EFT-28000-4-T-10
kWRating28.0
Voltage240
AMPS120 (3x40)
1.5 GPM—
2.0 GPM—
2.5 GPM—
3.0 GPM65
4.0 GPM50
Temperature Rise °F RecommendedWire Size
8 AWG per module
ModelNumber
EFT-18000-2-T-10EFT-24000-2-T-10EFTR-18000-6-T-10EFTR-24000-6-T-10EFTR-32000-6-T-10
kWRating18.024.018.024.032.0
Voltage208v/120v208v/120v
480v480v480v
AMPS50.067.021.728.938.5
1.5 GPM82—82——
2.0 GPM61826182—
2.5 GPM4965496587
3.0 GPM4154415473
3.5 GPM3547354762
4.0 GPM3241324155
Temperature Rise °F RecommendedWire Size10 AWG10 AWG10 AWG10 AWG8 AWG
Single Point (Single Phase)
Flow Controlled (Single Phase)
Thermostatic (Single Phase)
Series Two - Thermostatic (Single Phase)
Series Three (Single Phase)
ModelNumber
EFT-38000-4-F-10
kWRating38.0
Voltage240
AMPS160 (4x40)
1.0GPM129.8
2.0GPM129.8
2.5GPM103.8
4.0GPM64.9
6.0GPM43.3
5.0GPM51.9
3.0GPM86.5
Temperature Rise °FRecommended
Wire Size8 AWG
Series Four (Single Phase)
Thermostatic Triple Module Models (Three Phase)
For additional specifications and/or limitations, please see the installation manual for this product. All specifications aresubject to change without notice.
20
For additional specifications and/or limitations, please see theinstallation manual for this product. All specifications are subject tochange without notice.
ModelNumber
Approx.ShippingWeight
lbs.
JacketDia.
in.
SW-65C-5SW-80C-5SW-120C-5
5873114
273300422
Floor toTop ofHeater
in.
591/4
59621/2
Capacity
U.S.Gal.
2224
281/4
SW-65C-5SW-80C-5SW-120C-5
405415445
245,000245,000245,000
14.014.014.0
370370370
0.70.60.4
ModelNumber
Min. HeatRequired
Rate
(BTU/Hr.)
StandbyHeat Loss
Rating
(°F/Hr.)
Min. HeatSource
Flow Rate
(Gal./Min.)
ContinuousDraw Rating
@ 135°F
(Gal./Hr.)
First HourDeliveryRating
(Gal./Hr.)
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.2931
AHRI Certified Water Heater Ratings
PowerStor Series® Single WallPowerStor Series® Indirect Fired units provide class leading performance and large amounts of hot water. These units
incorporate a newly designed, super-efficient heat exchanger coil. Made of 11⁄2" O.D. diameter carbon steel tubing and
coated with Vitraglas®, they have a total heat surface area of 27.2 feet resulting in exceptional first hour delivery and
vast hot water reserves. PowerStor Series® models are the perfect addition to a boiler system.
INDIRECT MODELSSTANDARD FEATURES*
• 11⁄2" O.D. Single Wall, Glass Coated,Carbon Steel Heat Exchanger
• Honeywell Aquastat with an AdjustableDegree Differential
• Hydrojet® Total Performance System
• Vitraglas® Lining
• 1" NPT Dielectric Waterway Fittings
• T&P Relief Valve Installed
• Low Restriction Brass Drain Valve
• Three Protective Aluminum Anode Rods
• Non-CFC Foam Insulation
• 5–Year Limited Warranty on Steel Tank andHeat Exchanger
APPLICATIONS
Combined with boilers in apartments and
motels
*Full descriptions are available in glossary beginning on page 25.
Specifications
21
ModelNumber
Approx.ShippingWeight
lbs.
JacketDia.
in.
RTV-40-LRTV-52-LRTV-75-LRTV-120-L
405275119
8393117315
Floor toTop ofHeater
in.
351/4
455/8
637/8
605/8
Capacity
U.S.Gal.
242424
301/4
For additional specifications and/or limitations, please see theinstallation manual for this product. All specifications are subject tochange without notice.
ModelNumber
Min. HeatRequired
Rate
(BTU/Hr.)
StandbyHeat Loss
Rating
(°F/Hr.)
RTV-40-LRTV-52-LRTV-75-LRTV-120-L
158200225360
88,000113,000113,000195,000
Min. HeatSource
Flow Rate
(Gal./Min.)
8.08.08.011.0
ContinuousDraw Rating
@ 135°F
(Gal./Hr.)
First HourDeliveryRating
(Gal./Hr.)
133165165280
0.90.70.70.6
gAHRI Certified Water Heater Ratings
PowerStor Series® SS (Stainless Steel) Single Wall
PowerStor Series® SS (Stainless Steel) models utilize a superior grade of stainless steel for the tank and the heat
transfer coil. PowerStor Series® SS models also provide superior thermal conductivity for higher efficiency. These
models are the solution when stainless steel is specified or preferred for the application.
STANDARD FEATURES*
• 1" O.D. Single Wall, Stainless Steel HeatExchanger
• Honeywell Aquastat with an AdjustableDegree Differential
• NPT Waterway Fittings
• Low Restriction Brass Drain Valve
• T&P Relief Valve Included
• Protective Aluminum Anode Rod
• Non-CFC Foam Insulation
• 5–Year Limited Warranty on Steel Tank andHeat Exchanger
APPLICATIONS
Combined with boilers in apartments and
motels.
*Full descriptions are available in glossary beginning on page 25.
Specifications
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.293122
ModelNumber
Approx.ShippingWeight
lbs.
Floor toTop ofHeater
in.
JacketDia.
in.
Capacity
M-3-ST80R5M-3-ST80R5A*M-3-ST120R5M-3-ST120R5A*M-3-ST200R5A*
U.S.Gal.
8080119119200
192278312366541
2424282832
583/4
583/4
621/2
621/2
77
* Meets ASME code
A S M E
HLW
Small Volume Jacketed and InsulatedDesigned for moderate and commercial peak demands, jacketed storage tanks are available in 80, 120, and 200
gallon capacities. They meet a variety of hot water requirements in smaller commercial applications where a large
dump volume is required in a short period of time.
STORAGE TANKSSTANDARD FEATURES*
• ASME Construction Available
• Designed for Storage of Potable Water to180˚F
• 80, 120, and 200 Gallon Capacities
• Vitraglas® Lining
• Hand Hole Cleanout
• 2" NPT Dielectric Waterway Fittings (21⁄2"on M-3-ST120R5A and M-3-ST200R5A)
• Optional 2" Rear Water Connections (onlyon M-3-ST120R5 and M-3-ST120R5A)
• Low Restriction Brass Drain Valve
• Side T&P Valve Opening
• Two Protective Magnesium Anode Rods
• Non-CFC Foam Insulation
• 5–Year Limited Tank Warranty
APPLICATIONS
Dormitories and laundry facilities
*Full descriptions are available in glossary beginning on page 25.
Specifications
For additional specifications and/or limitations, please see theinstallation manual for this product. All specifications are subject tochange without notice.
23
ModelNumber
Glass LinedWeight125 psiASMElbs.
VerticalHeight
in.
JacketDia.
in.
Capacity
N†175J*5AN†210J*5AN†240J*5AN†280J*5AN†285J*5AN†310J*5AN†320J*5AN†340J*5AN†360J*5AN†415J*5AN†435J*5A N†453J*5AN†465J*5AN†500J*5AN†505J*5AN†515J*5AN†575J*5AN†580J*5AN†645J*5AN†675J*5AN†720J*5AN†765J*5AN†790J*5AN†840J*5AN†875J*5AN†1040J*5AN†1245J*5AN†1530J*5A
U.S.Gal.
175210240280285310320340360415435453465500505515575580645675720765790840875104012451530
438493539603667710658760796881917942967117610171053111713101217145613171602140017481776200333263541
34343434404034404040464640524640465246524652465258526464
7183931078086119939811089891228110113411392125104137116147128107149124148
Horiz.Length
in.
677989103768211589941068588118779713010988121100133112143124103145120144
†V = Vertical, H=Horizontal.*G = Glass Lined (Vitraglas®), *D = Double Glass Lined (Vitraglas®) *E = Epoxy Lined*S = Stainless Steel Tank.Example: NV210JG5A.
Tank Options:• Hand hole (4"x6")• Manway (12"x16")• Extra Tappings (1"- 4")• Flanged Connections (3"- 10")• 150 psi working pressure (add suffix -5)• Hydrojet® HC (add suffix -1)
Large Volume Jacketedand Insulated
Available in 34", 40", 46", 52", and 64" standard diameters,
these large volume, insulated, and jacketed tanks offer
capacities ranging from 175 – 1,530 gallons. Two-inch,
high-density foam insulation minimizes heat loss.
STANDARD FEATURES*
• Horizontal or Vertical ConfigurationsAvailable
• Available with Vitraglas® Lining, DoubleVitraglas® Lining, Epoxy Lining, or StainlessSteel Tank
• Hydrojet® HC – Optional
• Sturdy Steel Jacket
• Hand Hole Cleanout and Manway – Optional
• Designed for Storage of Potable Water up to180˚F
• All Tanks are Constructed and Certified inAccordance with ASME Section IV, PartHLW for 125 psi (862 kPa)
• Two Female 3" NPT Water Connections
• Two 3⁄4" NPT Aquastat Fittings
• Magnesium Anode Rods
• 2" High Density Foam Insulation
• 5–Year Limited Warranty on Steel Tank
• 10–Year Limited Warranty on DoubleVitraglas® lined Steel Tank
APPLICATIONS
Large fitness centers, industrial plants, hotels,
stadiums, and resorts
*Full descriptions are available in glossary beginning on page 25.
All dimensions and specifications within are subject to change without noticein accordance with our policy of continuous product improvement.
A S M E
HLW
Specifications
Sprayed-On RigidPolyurethane Foam (SPF)with Acrylic TopCoat(Outdoor Installations)
QUESTIONS? SPEAK WITH OUR EXPERTS AT 800.523.293124
ModelNumber
Approx.ShippingWeight
@125 psilbs.
VerticalHeight
in.
Capacity
N†175N*5AN†210N*5AN†240N*5AN†280N*5AN†285N*5AN†310N*5AN†320N*5AN†340N*5AN†360N*5AN†415N*5AN†435N*5AN†453N*5AN†465N*5AN†500N*5AN†505N*5AN†515N*5AN†575N*5AN†580N*5AN†645N*5AN†675N*5AN†720N*5AN†765N*5AN†790N*5AN†840N*5AN†1040N*5AN†1340N*5AN†1820N*5AN†2105N*5AN†2395N*5AN†2700N*5AN†3115N*5AN†3530N*5AN†4050N*5AN†4120N*5AN†5695N*5A
U.S.Gal.
17521024028028531032034036041543545346550050551557558064567572076579084010401340182021052395270031153530404541205695
30334738343355052747656955967169580574392887481586310459471173103113011101142816522182311035163922385143384825600955167994
677989103768211589941068588118779713010988121100133112143124145153168192216174198222192256262
Horiz.Length
in.
637585994578111859010281511147351126105841179612910813912014114716818621016819221693250256
JacketDia.
in.
3030303036363036363642423648423642484248424842484854606060727272847284
ModelNumber
Approx.ShippingWeight
@125 psilbs.
VerticalHeight
in.
Capacity
N†175T*5AN†210T*5AN†240T*5AN†280T*5AN†285T*5AN†310T*5AN†320T*5AN†340T*5AN†360T*5AN†415T*5AN†435T*5AN†453T*5AN†465T*5AN†500T*5AN†505T*5AN†515T*5AN†575T*5AN†580T*5AN†645T*5AN†675T*5AN†720T*5AN†765T*5AN†790T*5AN†840T*5AN†1040T*5AN†1340T*5AN†1690T*5AN†1820T*5AN†2395T*5AN†3115T*5AN†3530T*5AN†4120T*5AN†5695T*5A
U.S.Gal.
175210240280285310320340360415435453465500505515575580645675720765790840104013401690182023953115353041205695
303347383433550527476569559671695805743928874815863
1045947
11731031130111011428165221822622311039224338482555167994
698191105768411791961088788120799713211190123102135114145126147153189168216198222256262
Horiz.Length
in.
65778710145801138792104835111675511281078611998131110141122143147183168210192216250256
JacketDia.
in.
353535354141354135414747415347414753475347534753535954656577777789
†V = Vertical, H=Horizontal.*G = Glass Lined(Vitraglas®).*D = Double Glass Lined(Vitraglas®).*E = Epoxy Lined*S = Stainless Steel Tank.Example: NV210TG5A.
Tank Options• Hand hole (4"x6")• Manway (12"x16")• Extra Tappings (1"- 4")• Flanged Connections
(3"- 10")• 150 psi working pressure
(add suffix -5)• Hydrojet® HC
(add suffix -1)
A S M E
HLW
Unjacketed and UninsulatedSpecifications SPF Topcoat Specifications
STORAGE TANKSSTANDARD FEATURES*
• Horizontal or Vertical ConfigurationsAvailable
• Available with Vitraglas® Lining, DoubleVitraglas® Lining, Epoxy Lining, orStainless Steel Tank
• Hydrojet® HC - Optional
• 6" Skirt Height (Vertical Tank)
• Lifting Lugs - Standard
• Designed for Storage of Potable Water upto 180˚F
• All Tanks are Constructed and Certified inAccordance with ASME Section IV, PartHLW for 125 PSI (862 kPa)
• Magnesium Anode Rods
• 5–Year Limited Warranty
APPLICATIONS
Dormitories and laundry facilities
*Full descriptions are available in glossary beginning on page 25.
STANDARD FEATURES• The 100% Acrylic Topcoat has 21⁄4" (R–value of 16) of High
Density Polyurethane Foam that Is Formulated to WithstandExtreme Weather and a Full Range of Environmental Conditions
• Alternative for Insulated and Steel Jacketed Tank
• Any Tank Size or Shape can be Insulated with SPF
• SPF Insulation Is Field Repairable
Large Volume Unjacketedand Uninsulated
Alarm Horn – An option specified when theinstallation requires an audible alarm tosignal when the water heater operationis interrupted for faults including trippedhigh limit control, excessive pressure,insufficient pressure, or low water level.
All Models Listed with California EnergyCommission – California’s primaryenergy policy and planning agency. The Commission forecasts future energyneeds, promotes energy efficiencythrough appliance and buildingstandards, and supports renewableenergy technologies.
ASME Construction Available – AmericanSociety of Mechanical Engineers (ASME)standard for the design, fabrication, andinspection of boilers and pressurevessels. This option allows certainBradford White commercial waterheaters to be built to meet the ASMEConstruction requirements.
ASME T&P Relief Valve – Factory-providedASME rated relief valve protects againstexcessive temperature and pressurebuildup in the water heater.
Cast Aluminum Air Intake Boot – The castmolded air intake boot providesexceptional durability.
Closed Combustion – A combustionsystem that draws air for combustionfrom outside through an intake pipe orduct. Exhaust is vented through a similarpipe or duct to the outside. Ideal forinstallations with a negative air pressure.
Co-axial (Pipe inside Pipe) Venting Systemwith a Heavy-Duty Aluminum InnerWall and Galvanized Outer Wall –Venting that utilizes a pipe inside a pipeconfiguration. This allows combustibleair to enter from the outside through anouter pipe and exhausts the products ofcombustion through an inner pipe. Idealfor installations with a negative airpressure.
CSA – CSA International (CanadianStandards Association) is a standardsorganization that provides producttesting and certification services forelectrical, mechanical, plumbing, andgas products.
Defender Safety System® – BradfordWhite’s proven FVIR (Flammable VaporIgnition Resistant) combustiontechnology. It resists the ignition offlammable vapors outside the waterheater, maintains outstanding efficiency,long service life, and low NOx emissionswhile providing maintenance-freeoperation. FVIR compliance is requiredon all natural gas and propane waterheaters 75,000 BTU/Hr. and under.
Dielectric Waterway Fittings – Plastic-lined, galvanized steel fittings slow downthe process of electrolysis to minimizecorrosion. The dielectric waterwayfittings increase the life expectancy ofthe tank by decreasing possible leaks.
Direct Spark Ignition – A type of electronicpilot ignition that uses a spark to ignitethe gas directly at the burner.
Electronic Ignition – A type of ignitionsystem that eliminates the need for astanding pilot thus reducing gasconsumption and saving energy.Electronic ignition system also promotesreliable and consistent pilot and mainburner ignitions.
Energy Cut-Off (E.C.O.) – A Energy Cut-Off(E.C.O) shuts off all gas in event of anoverheat condition. The E.C.O. ismanually resettable for convenience.
Epoxy Lining – Bradford White storagetanks can be lined with a speciallyformulated epoxy that is a strong, heatresistant, and durable coating proveneffective against corrosion.
ETL – The ETL Listed mark is proof ofproduct compliance (electrical, gas, andother safety standards) to NorthAmerican safety standards. ETLspecializes in electrical product safetytesting and benchmark performancetesting.
Factory-Installed Heat Traps – Devices thatreduce standby heat loss through theinlet and outlet fittings.
Flammable Vapor Sensor – Electronicsensor that prevents water heateroperation if flammable vapors aredetected.
Fully Automatic Controls – Fast actingsurface mount thermostat forautomatic temperature control withmanual reset energy cut-off for safety.
Hand Hole Cleanout – Allows inspection oftank interior and facilitates removal ofaccumulated lime and sediment.
High and Low Pressure Limit Switches –Devices that shut down the waterheater in the event of either excessiveor inadequate water pressure.
High Density Foam Insulation – Coversthe side and top of tank, reducing theamount of heat loss. This results inless energy consumption, improvedoperation efficiencies, and jacketrigidity.
Hydrojet® Total Performance System –The Hydrojet® Total PerformanceSystem is a cold-water inlet tubeengineered to reduce costly sedimentbuildup and create more thoroughmixing of incoming water with storedwater. Because of more efficientmixing, extreme temperaturedifferences throughout the tank aregreatly reduced. Water heaters withthe Hydrojet® Total PerformanceSystem don't have to work as hard oras often to maintain a maximumsupply of hot water at the desiredtemperature. They heat water fasterand use less energy to do it.
Hydrojet®2 Total Performance System –This cold water inlet device minimizessediment buildup, increases delivery,and reduces thermal stratification. TheHydrojet®2 is specifically designed forhigher input applications.
Hydrojet® Sediment Reduction System –The Hydrojet® Sediment ReductionSystem is a variation of the originalresidential Hydrojet system thatreduces the accumulation of harmfulsediment in commercial water heaters.
Hydrojet® HC – The Hydrojet® HC is anoptional front connect configurationspecifically designed to maximize hotwater delivery from Bradford White'slarge volume storage tanks.
25
GLOSSARY OF ITEMS/FEATURES
ICON HD™ Commercial Control System –A major innovation in water heatingcontrol technology that combinesintelligence with ease of installationand service. It features an LCD digitaldisplay showing temperature setpointand diagnostic error codes to aid inservicing and troubleshooting.
ICON System™ Control – An exclusive gascontrol technology that offersAdvanced Temperature Control forconsistent and accurate watertemperature levels, PerformanceSoftware for enhanced First HourDelivery ratings and tightertemperature differentials, IntelligentDiagnostics with ten different codes toassist in troubleshooting, Pilot-On-Indication provided by a flashing greenLED, Millivolt Powered operation toeliminate the need for externalelectricity, separate immersedthermowell to eliminate the need todrain the tank when removing orreplacing the gas valve, and anintegrated Piezo Igniter to eliminate theneed to open the combustion chamberto light the pilot.
Immersed Adjustable Honeywell Aquastat– Fast acting immersion aquastat forautomatic temperature control(adjustable from 80°F to 160°F).
Immersion Thermostat and High Limit –Certain Bradford White electric waterheaters feature a thermostat immersed(submerged) inside the tank for greateraccuracy and control and also a hightemperature limit for sanitationapplications.
Incoloy Elements – Incoloy elements areused by Bradford White because oftheir durability. This tough alloy resiststhe effects of prolonged high operatingtemperatures, hard water, acids,corrosion, and thermal shock. Theyoffer longer life and reduced serviceand replacement costs. Incoloyelements are designed to better resistoverheating conditions.
Integrated Primary Control (Indoor) –Indoor EverHot® tankless models have aprimary control integrated into the faceof the water heater that provides 96°-140°F temperature settings. Optionalcommercial control provides up to 180°F- 185°F temperature settings dependingon model.
Lifting Lugs – Our large volume, unjacketedstorage tanks include lifting lugs toassist in transportation, installation, andpositioning.
Low NOx Power Burner – Bradford White’seF Series® Ultra High Efficiency waterheaters utilize a gas burner thatproduces low levels of nitrogen oxidesduring combustion to meet stringent airquality requirements in regionsthroughout the country.
Low Restriction Brass Drain Valve – Thisdurable and tamperproof valve allowsthe installer or service technician todrain the tank faster, resulting in areduction of service time. Features a ballvalve and straight design for easy hoseconnection.
Low Water Cut-Off (also listed as InternalLow Water Cut-Off) – A feature thatshuts down the water heater in the eventthere is inadequate water volume.
Manway – A convenient passageway thatallows a person easy access to the tankfor inspection and cleaning.
Max Temp–180°F – Water heaters with amaximum temperature setting of 180°Fmay have the ability to be used inapplications requiring hot water forsanitary purposes such as commercialkitchens, laundromats, hospitals, andother healthcare facilities (unlessotherwise noted).
Millivolt Powered Ignition – Water heatersequipped with Millivolt Powered Ignitionproduce their own energy from the pilotand thermopile assembly to operate theflue damper, eliminating the need for anexternal source of electricity. Thesewater heaters also incorporate acontinuous pilot, which eliminates“lockout” situations.
Non-CFC Foam Insulation – A highlyefficient and environmentally friendlypolyurethane material injected betweenthe tank and jacket that reduces heatloss, resulting in less energyconsumption, improved operationefficiencies, and jacket rigidity.
NPT (Aquastat Fittings, Dielectric WaterFittings, Water Connections, T&PRelief Valve Opening) – National PipeThread Taper (NPT) is a U.S. standardfor tapered threads used on pipes andfittings. A tapered thread will pull tight,making a fluid-tight seal.
NSF Approved – NSF (National SanitationFoundation) International is anaccredited, third-party certification bodythat tests and certifies products to verifythey meet certain public health andsafety standards. Water heatersapproved by NSF meet minimum publichealth and sanitation standards inmaterials, design, construction, andperformance of commercial waterheaters, hot water supply boilers, andheat recovery equipment.
NSF Construction Available – This optionallows certain Bradford Whitecommercial water heaters to meet therequirements of NSF construction.
Optional Concentric Vent Kit Termination– 2" or 3" termination fitting provides fora single opening through a wall or roof.
Pedestal Base – Round, legless supportbase allows for easy transport andpositioning of the water heater.
GLOSSARY OF ITEMS/FEATURES
26
35
Piezo Igniter – An ignition system thatconsists of a small, spring-loadedhammer that hits a crystalline materialproducing a spark to ignite a gas fuelsource. It eliminates the need to openthe combustion chamber to light theburner. No external electricity isrequired.
Powered Anode Rod – A type of anoderod for large commercial water heaterswhere the risk of corrosion is high.Powered anode rods release a smallelectrical current to protect the tankfrom corrosion. Powered anode rodsdon't need to be removed andreplaced, as they don't corrode.
Powerful Blower Motor – Bradford White’sPower Vent and Power Direct Ventmodels feature a powerful blowermotor with higher torque for greaterresistance to outside winds and thepower to eliminate many problemswith difficult venting situations. It isquiet and runs cooler for a longeroperational life.
Protective Magnesium (also Aluminum)Anode Rod – A sacrificial rodcomposed of one or more metals thatprotects the tank from corrosion bydrawing the harmful electrolyticprocess away from the tank to the roditself. Magnesium and Aluminum arethe most widely used anode materialsand will satisfy the majority of waterchemistry situations.
Red Oxide Primer – A lead-free, oil-based,high-quality, rust-resistant primer idealfor use on metal surfaces. Thecorrosion-resistant pigment makes itan ideal choice to protect steel tanksfrom chemical fumes, excessive heat,humidity, rain, and wind.
Safety Door Interlock – Safety switchsecures access to the control boxdoor when 120 volt is applied to thesystem. Unable to open the door whenpower is on.
Sanitizing Capability – Allows for atemperature setting up to 180°F (82°C)for sanitizing applications.
Side Connections – Side connections allowfor greater installation flexibility and can beused to connect additional equipmentsuch as a dishwasher or washingmachine. When the water heater isequipped with a mixing valve, the sideconnections allow the water heater tosupply higher and lower temperaturegeneral purpose hot water simultaneously.
Single or Three Phase – Single-phaseelectric power refers to the distribution ofalternating current electric power using asystem in which all the voltages of thesupply vary in unison. In a three-phasesystem, the currents in each conductorreach their peak instantaneous valuessequentially, not simultaneously.
Snap-Lock Draft Diverter – Bradford Whiteis the originator of the Snap-Lock DraftDiverter. Unlike other manufacturers thatoffer a screw-in style, Bradford Whitewater heaters provide a snap-on style sono drilling or sheet metal screws areneeded. The Snap-Lock Draft Divertermakes installation faster and easier.
Stainless Steel Tank – Bradford White canmanufacture storage tanks from 304,304L, 316, or 316L stainless steel for avariety of applications.
Stainless Steel Tank and Heat Exchanger– Made from chromium molybdenum -titanium ferritic 444 stainless steel alloy.
Submerged Combustion Chamber (seealso Three Pass Flue System) – eFSeries® Ultra High Efficiency water heatersutilize a combustion chamber that issubmerged in the center of the tank tominimize radiant heat loss and maximizeefficiency.
Surface (SF) or Immersion (CF)Thermostats – Surface thermostats aremounted on the outside of the tank,sensing water temperature through thesteel tank. Immersion thermostats aresubmerged directly into the water.
T&P Relief Valve Installed – Relief valveinstalled at the factory protects againstexcessive temperature and pressure (T&P)buildup in the tank.
Temperature and Pressure Gauge – A combination gauge that provides bothtemperature and pressure readings in the tank.
Thermal Efficiency – Thermal efficiency is ameasure of the output energy divided bythe input energy in a system. It must bebetween 0% and 100%. A thermalefficiency of 100% would mean that allenergy put into a system comes out in ausable form.
Three Pass Heat Exchanger System –Bradford White’s eF Series® Ultra HighEfficiency water heaters employ a three-phase or pass flue-type heat exchanger.As the products of combustion passthrough each phase of the flue tube,heat is efficiently transferred to thesurrounding water.
UL Listed – Underwriters Laboratories (UL)is an independent product safety testingand certification organization. Productsand components listed with thisorganization have been tested andcertified to meet performance and publicsafety standards.
Unbalanced Venting – Venting configurationin which the air intake pipe doesn't haveto be the same length as the exhaustpipe, and both terminations may be ondifferent walls.
Virtually Maintenance-Free CombustionSystem – Under normal conditions,water heaters equipped with theDefender Safety System® combustionchamber do not require regular cleaningof air inlet openings or flame arrestor.
Vitraglas® Lining – Bradford White tanksare lined with an exclusively engineeredenamel formula that provides superiorprotection from the highly corrosiveeffects of hot water. Vitraglas® is sprayapplied to the tank resulting in a uniformthickness and better bonding to thetank. Test results prove that Vitraglasprovides unsurpassed protectionagainst failure when compared to otherwater heater linings.
1" O.D. Single Wall, Stainless Steel HeatExchanger – Single wall 1" O.D.stainless steel coil.
6" Skirt Height (Vertical Tank) – BradfordWhite unjacketed storage tanks featurea 4" skirt height on 30" to 48" diametertanks and a 6" skirt height on 54" to 84"diameter tanks for easier access underthe tank.
27
Ambler, PA
Sales/
For U.S. and Canada field service,contact your professional installer or
local Bradford White sales representative.
800-523-2931Fax/215-641-1670
Technical Support/800-334-3393Fax/269-795-1089
Warranty/800-531-2111Fax/269-795-1089
International:T
Telephone/215-641-9400
elefax/215-641-9750
bradfordwhite.comwww.
Sales/Technical Support866-690-0961905-238-0100
Fax/905-238-0105
Mississauga, ON
Committed to American Manufacturing, Wholesale Distribution, and Professional Installation.
©2015, Bradford White Corporation. All rights reserved. CMCAT-1015www.bradfordwhite.com