commercial cement plaster 3 ds826 - dryvit · commercial cement plaster 3™ ds826 fiberglass...
TRANSCRIPT
![Page 1: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/1.jpg)
COMMERCIAL CEMENT PLASTER 3™
DS826
Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier
Commercial Cement Plaster 3 Installation Details
![Page 2: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/2.jpg)
TABLE OF CONTENTS
EPS Cornice
Termination at Parapet Flashing
Termination at Roof/Wall Intersection
Termination at RoofSloped Sill
Horizontal Flashing & Expansion Joint
Outside Corner
Termination at Concrete Foundation
Termination at Storefront Window Setback
Termination at Storefront Window Head-Sill
Termination at Self Flashing Nail-On Window
Termination at Wood Window
Opening Preparation Backstopâ NT/ AquaFlashâ System
Cutaway
Termination at Storefront Window- Jamb
Inside Corner Detail
DETAIL
CCP-3 0.0.10
CCP-3 0.0.16
CCP-3 0.0.15
CCP-3 0.0.14CCP-3 0.0.13CCP-3 0.0.12
CCP-3 0.0.11
CCP-3 0.0.05
CCP-3 0.0.06
CCP-3 0.0.08
CCP-3 0.0.09
CCP-3 0.0.03CCP-3 0.0.04
CCP-3 0.0.07
PAGE
CCP-3 0.0.01CCP-3 0.0.02
DRYVIT MAKES NO REPRESENTATION REGARDING CONFORMITY OFITS SUGGESTIONS TO MODEL BUILDING CODES, ENGINEERINGCRITERIA, SPECIFIC APPLICATIONS OR PROJECT LOCATIONS. ALLCOMPONENTS INDICATED IN ILLUSTRATIONS, AS WELL ASOTHERS THAT MAY BE REQUIRED FOR THE INTEGRITY OF THESYSTEM SHALL BE DESIGNED, DETAILED AND ENGINEERED BYREPRESENTATIVES OF THE ARCHITECT, OWNER OR CONTRACTORTO BE IN CONFORMANCE WITH MODEL CODES, ARCHITECTURALAND ENGINEERING REQUIREMENTS PERTAINING TO SPECIFICBUILDING PROJECTS.
DRYVIT MAKES NO WARRANTY, EXPRESSED OR IMPLIED, AS TOTHE ARCHITECTURAL DESIGN, ENGINEERING, OR WORKMANSHIP OFPROJECTS UTILIZING DRYVIT SYSTEMS OR PRODUCTS.
THE LIABILITIES OF DRYVIT SHALL BE AS STATED IN THEDRYVIT STANDARD WARRANTY. CONTACT DRYVIT FOR A FULLAND COMPLETE COPY OF THIS WARRANTY.
NOTE
Control Joint Intersection CCP-3 0.0.17Horizontal or VerticalOne-Piece Expansion Joint
CCP-3 0.0.18
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
![Page 3: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/3.jpg)
Cutaway
™
SHEATHED FRAMINGSUBSTRATE
â
CCP-3 0.0.01
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 4: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/4.jpg)
CCP-3 0.0.02
INSTALL DIAGONAL STRIPOF DRYVIT AQUAFLASHMESH AND AQUAFLASHAT CORNERS(NOTES 1 AND 3)
APPLY DRYVIT AQUAFLASHSYSTEM (NOTES 1 AND 3)
DRYVIT BACKSTOP NTAIR/WATER-RESISTIVEBARRIER COATING
STEP #1 STEP #2
INSTALL DRYVIT AQUAFLASHSYSTEM AT JAMBS(NOTES 1 AND 3)
STEP #3 STEP #4
NOTE:
1. DRYVIT AQUAFLASH SHALL EXTENDTO INTERIOR FACE OF OPENING.
2. REFER TO HEAD, SILL AND JAMBDETAILS FOR FLASHING INTEGRATION.
3. ASSOCIATED FLASHINGS PERMANUFACTURER'S RECOMMENDATIONS,CODE REQUIREMENTS AND PROJECTDOCUMENTS.
INSTALL DRYVITAQUAFLASH SYSTEMAT HEADS(NOTES 1, 2, AND 3)
Opening Preparation-
Backstopâ NT/AquaFlash® System
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
![Page 5: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/5.jpg)
CCP-3 0.0.03
Termination at Wood Window
™
â
HEAD
JAMB
SILL
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 6: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/6.jpg)
CCP-3 0.0.04
™
â
â
HEAD & JAMB
SILL
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
Termination at
Self Flashing Nail-On Window
NOTE:
1. ALTERNATE DETAIL AT WINDOWHEAD WOULD INCLUDE METALFLASHING WITH END DAMS
2. ADDITIONAL FLASHING MAY BEREQUIRED FOR WINDOWS THAT ARENOT SELF FLASHING
3. BACKSTOP NTAIR/WATER-RESISTIVE BARRIERREQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT ORPAPER BACKED LATH.
4. OTHER APPROVED SCRATCH ANDBROWN COATS MAY BEACCEPTABLE. CONSULT DRYVITSYSTEMS, INC. FOR SPECIFICS.
![Page 7: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/7.jpg)
CCP-3 0.0.05
Termination at Storefront Window-Jamb
â
™ â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 8: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/8.jpg)
CCP-3 0.0.06
Termination at Storefront Window-Head+Sill
â
™
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 9: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/9.jpg)
CCP-3 0.0.07
Termination at Storefront Window Setback
HEAD & JAMB
SILL
â
™
â
® ™
â
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 10: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/10.jpg)
CCP-3 0.0.08
Termination at Concrete Foundation
â
™
â
CASING BEAD AT CONCRETE FOUNDATION
WEEP SCREED AT CONCRETE FOUNDATION
â
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 11: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/11.jpg)
CCP-3 0.0.09
Outside Corner
â
™
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. WELDED WIRE, PLASTIC NOSE, OR PVCCORNER TRIM MAY BE USED.
3. FILL SPACE SOLID WITH PLASTER BASE4. OTHER APPROVED SCRATCH AND BROWN
COATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 12: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/12.jpg)
CCP-3 0.0.10
Inside Corner Detail
â
TYPICAL INSIDE CORNER
INSIDE CORNER CONTROL JOINT
™
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 13: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/13.jpg)
CCP-3 0.0.11
™
â
Horizontal Flashing & Expansion Joint
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 14: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/14.jpg)
CCP-3 0.0.12
Sloped Sill
â
â
™
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 15: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/15.jpg)
CCP-3 0.0.13
Termination at Roof
â â
ä
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 16: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/16.jpg)
CCP-3 0.0.14
Termination at Roof/Wall Intersection
™
â
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 17: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/17.jpg)
CCP-3 0.0.15
Parapet Flashing
â
™
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 18: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/18.jpg)
CCP-3 0.0.16
EPS Cornice
â
™
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. ADHESIVELY ATTACH EPS SHAPE TO CEMENT PLASTER BASE COAT WITH GENESIS OR GENESIS DM BASE COAT.2. BACKSTOP NT AIR/WATER-RESISTIVE
BARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
3. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
![Page 19: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/19.jpg)
CCP-3 0.0.17
Control Joint Intersection
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
![Page 20: COMMERCIAL CEMENT PLASTER 3 DS826 - Dryvit · COMMERCIAL CEMENT PLASTER 3™ DS826 Fiberglass Reinforced Portland Cement Plaster With Integral Fluid Applied Air/Water-Resistive Barrier](https://reader035.vdocuments.us/reader035/viewer/2022071420/6119b81748b1ab40a078a3ca/html5/thumbnails/20.jpg)
CCP-3 0.0.18
™
â
â
The architecture, engineering, and design of the project using the
Dryvit products is the responsibility of the project's design
professional. All systems must comply with local building codes and
standards. This detail is for general information and guidance only
and Dryvit specifically disclaims any liability for the use of this detail
and for the architecture, design, engineering or workmanship of any
project. The project design professional determines, in its sole
discretion, whether this detail or a functionally equivalent detail is
best suited for the project. Use of a functionally equivalent detail does
not violate Dryvit's warranty. This detail is subject to change without
notice. Contact Dryvit to ensure you have the most recent version.
Commercial Cement Plaster 3™
©
Dryvit Systems, Inc. 1969
Issued: 10/2016
NOTE:
1. BACKSTOP NT AIR/WATER-RESISTIVEBARRIER REQUIRES USE OF A SLIP SHEETLAYER SUCH AS #15 FELT OR PAPERBACKED LATH.
2. OTHER APPROVED SCRATCH AND BROWNCOATS MAY BE ACCEPTABLE. CONSULTDRYVIT SYSTEMS, INC. FOR SPECIFICS.
Horizontal or Vertical
One-Piece Expansion Joint