command autocad

1. Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Automatic save to C:\Users\Administrator\appdata\local\temp\Drawing1_1_1_8623.sv$ ...

Command:Command: ROTATECurrent positive angle in UCS: ANGDIR=counterclockwise ANGBASE=036 found

Specify base point:Specify rotation angle or [Copy/Reference] :Command: *Cancel*Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] :Current layer: "diagonal"Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: _ON

Enter name list of layer(s) to turn on: =gridEnter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]:

Command: L LINESpecify first point:Specify next point or [Undo]:Specify next point or [Undo]: *Cancel*Command: L LINECommand: l LINESpecify first point:Specify next point or [Undo]:Specify next point or [Undo]: *Cancel*Command: '_.-LAYERCurrent layer: "diagonal"Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: _OFF

Enter name list of layer(s) to turn off or : =gridEnter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]:

Current settings: Copy mode = MultipleSpecify base point or [Displacement/mOde] :Specify second point or [Array] :Specify second point or [Array/Exit/Undo] : *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: *Cancel*

Command: *Cancel*

Command: _u ScrollCommand: _u COPYCommand: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: COPY 8 found


Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: ROTATECurrent positive angle in UCS: ANGDIR=counterclockwise ANGBASE=08 found

Specify base point:Specify rotation angle or [Copy/Reference] :Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: COPY 8 found




Specify base point:Specify rotation angle or [Copy/Reference] :Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: COPY 8 found



Specify base point:Specify rotation angle or [Copy/Reference] :Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: MOVE 8 found

Specify base point or [Displacement] :Specify second point or :Command: *Cancel*

Command: '_.-LAYER

Current layer: "diagonal"Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: _ON

Enter name list of layer(s) to turn on: =gridEnter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]:

Command: l LINESpecify first point:Specify next point or [Undo]:Specify next point or [Undo]: *Cancel*


Command: '_.-LAYER

Current layer: "diagonal"Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: _OFF


Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: _.erase 7 found

Command: L LINESpecify first point:Specify next point or [Undo]:Specify next point or [Undo]: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: LAYERCommand:Command: *Cancel*


Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:



Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Command: XL XLINESpecify a point or [Hor/Ver/Ang/Bisect/Offset]:

Command: TRIMCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:

Select object to trim or shift-select to extend or

Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: '_.-LAYER

Current layer: "centerline">>Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: _OFF

Resuming TRIM command.

Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: '_.-LAYER

Current layer: "centerline">>Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: _ON

>>Enter name list of layer(s) to turn on: =centerline>>Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]:

Resuming TRIM command.


Automatic save to C:\Users\Administrator\appdata\local\temp\Drawing1_1_1_8623.sv$ ...

2.

AutoCAD menu utilities loaded.Command: _RIBBON

Command: COMMANDLINE

Command:Command:Command: l LINESpecify first point:Specify next point or [Undo]: 40Specify next point or [Undo]: _uSpecify next point or [Undo]: *Cancel*

Command: UNITSCommand: l LINESpecify first point:Specify next point or [Undo]: 40Specify next point or [Undo]: 40Specify next point or [Close/Undo]: 40Specify next point or [Close/Undo]:Specify next point or [Close/Undo]: *Cancel*



Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] : 2.5Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :


Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: *Cancel*

Command: _u TRIMCommand: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: *Cancel*

Command: trimCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:


Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: _uSelect object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: _uCommand has been completely undone.


Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] :Select object to offset or [Exit/Undo] :















Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:No objects crossed by crossing window.Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:



Command: l LINESpecify first point:Specify next point or [Undo]: 12.5Specify next point or [Undo]: 12.5Specify next point or [Close/Undo]: 25Specify next point or [Close/Undo]: 25Specify next point or [Close/Undo]: 25Specify next point or [Close/Undo]:Specify next point or [Close/Undo]: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: _.erase 5 found


Command:Command: _u ERASECommand: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: _.erase 5 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: trimCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or : 1 found

Select objects: *Cancel*

Command: trimCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:



Command:Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: '_.quickpropertiesCommand: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: _.erase 3 found





Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*Command: trimCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] :Select object to offset or [Exit/Undo] :

Command: trimCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

3.



Command:Command:Command: l LINESpecify first point:Specify next point or [Undo]: 40Specify next point or [Undo]: 40Specify next point or [Close/Undo]: _uSpecify next point or [Undo]: *Cancel*

Command: l LINESpecify first point:Specify next point or [Undo]: 40Specify next point or [Undo]: 40Specify next point or [Close/Undo]: 40Specify next point or [Close/Undo]: *Cancel*

Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] : Specify second point: *Cancel*

Command:Command:Command: _optionsCommand: l LINESpecify first point: *Cancel*

Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] :Select object to offset or [Exit/Undo] : *Cancel*

Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] : 5

Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] :

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: LAYERCommand:


Command: '_.-LAYER

Current layer: "grid"Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: _COLOR

New color [Truecolor/COlorbook] : 1

Enter name list of layer(s) for color 1 (red) : =gridEnter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]:

Command: *Cancel*

Command: l LINESpecify first point: *Cancel*


Command: '_.-LAYER

Current layer: "0"Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/TRansparency/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: _OFF


Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command:Command: COPY 8 found



Command: l LINESpecify first point:Specify next point or [Undo]:Specify next point or [Undo]:Specify next point or [Close/Undo]: *Cancel*


Specify base point:Specify rotation angle or [Copy/Reference] :Command: _u ROTATECommand: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: ROTATECurrent positive angle in UCS: ANGDIR=counterclockwise ANGBASE=010 found

Specify base point:Specify rotation angle or [Copy/Reference] :Command: p PANPress ESC or ENTER to exit, or right-click to display shortcut menu.

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: MOVE 10 found

Specify base point or [Displacement] :Specify second point or :Command: *Cancel*

Command: P PANPress ESC or ENTER to exit, or right-click to display shortcut menu.


4. \Command: _uCommand: L LINESpecify first point:Specify next point or [Undo]: 40Specify next point or [Undo]: 40Specify next point or [Close/Undo]: 40Specify next point or [Close/Undo]: 40Specify next point or [Close/Undo]: *Cancel*


Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] : 2.5Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Select object to offset or [Exit/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] : *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: COPY 5 found

Current settings: Copy mode = MultipleSpecify base point or [Displacement/mOde] :Specify second point or [Array] :Specify second point or [Array/Exit/Undo] :Specify second point or [Array/Exit/Undo] :Specify second point or [Array/Exit/Undo] : *Cancel*

Command:Command: _.erase 1 found

Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] :

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: COPY 4 found

Current settings: Copy mode = MultipleSpecify base point or [Displacement/mOde] :Specify second point or [Array] :Specify second point or [Array/Exit/Undo] :Specify second point or [Array/Exit/Undo] :Specify second point or [Array/Exit/Undo] :Specify second point or [Array/Exit/Undo] : *Cancel*

Command: TRIMCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:No objects crossed by crossing window.Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:


Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:No objects crossed by crossing window.Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:


Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: *Cancel*







Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: _uSelect object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:





Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:No objects crossed by crossing window.Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:No objects crossed by crossing window.Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:







Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: rSelect objects to erase or : 1 found

Select objects to erase: *Cancel*

Command: TRIMCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: rSelect objects to erase or : Specify opposite corner: 6 found

Select objects to erase:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:

Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: rSelect objects to erase or : Specify opposite corner: 0 foundSelect objects to erase or : 1 found

Select objects to erase: *Cancel*

Command: trimCurrent settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:Command: _.erase 15 found


Command: p PANPress ESC or ENTER to exit, or right-click to display shortcut menu.


Specify base point:Invalid point.

Specify base point:Specify rotation angle or [Copy/Reference] :Command: p PANPress ESC or ENTER to exit, or right-click to display shortcut menu.

Command:Specify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] :Regenerating model.

Command: *Cancel*


Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:

5.



Command:Command:Command: l LINESpecify first point: Specify next point or [Undo]: 40Specify next point or [Undo]: 40Specify next point or [Close/Undo]: 20Specify next point or [Close/Undo]: 20Specify next point or [Close/Undo]: 40Specify next point or [Close/Undo]: *Cancel*

Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] : 5Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] : *Cancel*

Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Select object to offset or [Exit/Undo] : *Cancel*

\

6.

Customization file loaded successfully. Customization Group: ACADCustomization file loaded successfully. Customization Group: CUSTOMCustomization file loaded successfully. Customization Group: AUTODESKSEEKCustomization file loaded successfully. Customization Group: MODELDOCCustomization file loaded successfully. Customization Group: CONTENTEXPLORERCustomization file loaded successfully. Customization Group: FEATUREDAPPSCustomization file loaded successfully. Customization Group: SKETCHUPIMPORTSKPCustomization file loaded successfully. Customization Group: EXPRESSCustomization file loaded successfully. Customization Group: APPMANAGERRegenerating model.



Command:Command:Command: L LINESpecify first point:Specify next point or [Undo]:Specify next point or [Undo]: _uSpecify next point or [Undo]: _uAll segments already undone.

Specify first point: *Cancel*

Command: Command: l LINESpecify first point:Specify next point or [Undo]: 40Specify next point or [Undo]: 20Specify next point or [Undo]: 20Specify next point or [Close/Undo]: 20Specify next point or [Close/Undo]: 20Specify next point or [Close/Undo]: 20Specify next point or [Close/Undo]: 20Specify next point or [Close/Undo]: 20Specify next point or [Close/Undo]: *Cancel*

Command: p PAN

Command:Command:Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] : 5

Command:Command: l LINESpecify first point:Specify next point or [Undo]: 20Specify next point or [Undo]: 20Specify next point or [Close/Undo]: *Cancel*

command autocad

Documents