command: 3darray select objects: 1 found select objects:

Command: 3darray Select objects: 1 foundSelect objects: Enter the type of array [Rectangular/Polar] <R>:p Enter the number of items in the array: 3 Specify the angle to fill (+=ccw, -=cw) <360>: Rotate arrayed objects? [Yes/No] <Y>: Specify center point of array: 0,0 Specify second point on axis of rotation: 0,0,20 Command: hi HIDE Regenerating model.

Command: rotate3d Current positive angle: ANGDIR=counterclockwise ANGBASE=0Select objects: 1 foundSelect objects: Specify first point on axis or define axis by[Object/Last/View/Xaxis/Yaxis/Zaxis/2points]: y Specify a point on the Y axis <0,0,0>: Specify rotation angle or [Reference]: -150 Command: hi HIDE Regenerating model.

Command: mirror3d Select objects: 1 foundSelect objects: Specify first point of mirror plane (3 points) or[Object/Last/Zaxis/View/XY/YZ/ZX/3points] <3points>: zx Specify point on ZX plane <0,0,0>: Delete source objects? [Yes/No] <N>: Command: hi HIDE Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 4 Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: SI Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: H Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: V Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: A Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: B Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: L Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: R Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 2 Enter a configuration option [Horizontal/Vertical] <Vertical>: Regenerating model.

Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 2 Enter a configuration option [Horizontal/Vertical] <Vertical>: H Regenerating model.

Command: limits Reset Model space limits:

Specify lower left corner or [ON/OFF] <0.0000,0.0000>: Specify upper right corner <420.0000,297.0000>: 120,80

Command: m MOVE

Select objects: 1 found

Select objects: Specify base point or displacement: 40,40 Specify second point of displacement or <use first point as displacement>: 40,80

Command: ti TILEMODEEnter new value for TILEMODE <1>: 0 Regenerating layout.Command: limits Reset Paper space limits:Specify lower left corner or [ON/OFF] <0.0000,0.0000>: Specify upper right corner <420.0000,297.0000>: 210,297 Command: Z ZOOMSpecify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: A Regenerating layout.Command: mview Specify corner of viewport or [ON/OFF/Fit/Hideplot/Lock/Object/Polygonal/Restore/2/3/4] <Fit>: R Enter viewport configuration name or [?] <*Active>: Specify first corner or [Fit] <Fit>: 20,10 Specify opposite corner: 200,287 Regenerating model.

Command: mspace Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: N Enter name(s) of new layers frozen in all viewports: corp,sectiune,hasuri,axe-princ,axe-sus,axe-st Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:

Command: ti TILEMODEEnter new value for TILEMODE <0>: 1 Regenerating model.Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: SI Regenerating model.

Command: change Select objects: 40,0 1 foundSelect objects: Specify change point or [Properties]: P Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA Enter new layer name <0>: corp Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:

Command: section Select objects: 40,40 1 foundSelect objects: Specify first point on Section plane by [Object/Zaxis/View/XY/YZ/ZX/3points] <3points>: ZX Specify a point on the ZX-plane <0,0,0>: 0,60 Command: -layer Current layer: "0"

Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF Enter name list of layer(s) to turn off: corp Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:

Command: ucs Current ucs name: *WORLD*

Enter an option [New/Move/orthoGraphic/Prev/Restore/Save/Del/Apply/?/World] <World>: N Specify origin of new UCS or [ZAxis/3point/OBject/Face/View/X/Y/Z] <0,0,0>: OB Select object to align UCS: 0,60

Command: change Select objects: 0,0 1 found

Select objects:

Specify change point or [Properties]: P Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA Enter new layer name <0>: sectiune Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:

Command: -layer Current layer: "0"

Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: LW Enter lineweight (0.0mm - 2.11mm): 0.8 Enter name list of layers(s) for lineweight 0.80mm <0>: sectiune Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: SEnter layer name to make current <0>: sectiune Enter an option


Command: -layer Current layer: "sectiune"

Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S Enter layer name to make current <sectiune>: hasuri Enter an option


Command: -bhatch Current hatch pattern: ANGLE

Specify internal point or [Properties/Select/Remove islands/Advanced]: P Enter a pattern name or [?/Solid/User defined] <ANGLE>: ansi31 Specify a scale for the pattern <1.0000>: 0.5 Specify an angle for the pattern <0>: Current hatch pattern: ANSI31

Specify internal point or [Properties/Select/Remove islands/Advanced]: 4,3 Analyzing internal islands...

Current hatch pattern: ANSI31







Specify internal point or [Properties/Select/Remove islands/Advanced]:

Command: -layer Current layer: "hasuri"

Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S Enter layer name to make current <hasuri>: axe-princ Enter an option


Command: ti TILEMODE

Enter new value for TILEMODE <1>: 0 Regenerating layout.

Regenerating model.

Command: -layer Current layer: "axe-princ"

Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S Enter layer name to make current <axe-princ>: 0 Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T Enter layer name(s) to thaw: sectiune,hasuri,axe-princ Enter an option [All/Select/Current] <Current>: Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: Regenerating layout.

Regenerating model.

Command: vpoint Current view direction: VIEWDIR=-1.2000,-1.0000,1.0000

Specify a view point or [Rotate] <display compass and tripod>: 0,-1,0 Regenerating model.

Grid too dense to display

Command: z ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: S Enter a scale factor (nX or nXP): 1XP Grid too dense to display

Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T Enter layer name(s) to thaw: corp Enter an option [All/Select/Current] <Current>:

Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: Regenerating layout.

Regenerating model.

Grid too dense to displayCommand: vpoint Current view direction: VIEWDIR=-1.2000,-1.0000,1.0000

Specify a view point or [Rotate] <display compass and tripod>: 0,0,1 Regenerating model.

Command: _solprof Select objects: 40,40 1 found

Select objects: Display hidden profile lines on separate layer? [Yes/No] <Y>: Project profile lines onto a plane? [Yes/No] <Y>: Delete tangential edges? [Yes/No] <Y>: One solid selected.Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: F Enter layer name(s) to freeze: corp Enter an option [All/Select/Current] <Current>:

Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: Command: vpoint Current view direction: VIEWDIR=0.0000,0.0000,1.0000

Specify a view point or [Rotate] <display compass and tripod>: -1,-1,1 Regenerating model.

Command: Grid too dense to display

vplayer

Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T Enter layer name(s) to thaw: corp Enter an option [All/Select/Current] <Current>:

Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: Regenerating layout.

Regenerating model.


Command: vpoint Current view direction: VIEWDIR=-1.2000,-1.0000,1.0000 Specify a view point or [Rotate] <display compass and tripod>: -1,0,0 Regenerating model.



Command: _solprof Select objects: 40,40 1 found

Select objects: Display hidden profile lines on separate layer? [Yes/No] <Y>: Project profile lines onto a plane? [Yes/No] <Y>: Delete tangential edges? [Yes/No] <Y>: One solid selected.

Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: F Enter layer name(s) to freeze: corp Enter an option [All/Select/Current] <Current>: Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:


Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: ? Enter layer name(s) to list <*>: Layer name State Color Linetype Lineweight

------------------ ----------- ------------- ------------ ------------

"0" on -P 7 (white) "Continuous" Default

"axe" on -P 7 (white) "CENTER2" Default

"axe-princ" on -P 7 (white) "CENTER2" Default

"axe-st" on -P 7 (white) "CENTER2" Default

"axe-sus" on -P 7 (white) "CENTER2" Default

"corp" on -P 7 (white) "Continuous" Default

"cote" on -P 7 (white) "Continuous" Default

"Defpoints" on 7 (white) "Continuous" Default

"f-inv" on -P 7 (white) "DASHED2" 0.350 mm.

"f-viz" on -P 7 (white) "Continuous" 0.500 mm.

"hasuri" on -P 7 (white) "Continuous" Default

"l-s-viz" on -P 7 (white) "Continuous" Default

"PH-36E" on -P 7 (white) "Continuous" Default

"PH-370" on -P 7 (white) "Continuous" Default

"PV-36E" on -P 7 (white) "Continuous" Default

"PV-370" on -P 7 (white) "Continuous" Default

"sectiune" on -P 7 (white) "Continuous" 0.800 mm.

Current layer: "0"

Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: LW Enter lineweight (0.0mm - 2.11mm): 0.8 Enter name list of layers(s) for lineweight 0.80mm <0>: PV-36E,PV-370 Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: L Enter loaded linetype name or [?] <Continuous>: dashed2 Enter name list of layer(s) for linetype "dashed2" <0>: PH-36E,PH-370 Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: Regenerating layout.

Regenerating model.


Command: pspace


Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: N Enter name list for new layer(s): fer Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: C Enter color name or number (1-255): blue Enter name list of layer(s) for color 5 (blue) <0>: fer Enter an option


Command: change

Select objects: 70,287

1 found


1 found, 2 total


1 found, 3 total


1 found, 4 total

Select objects:

Specify change point or [Properties]: p

Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: la

Enter new layer name <0>: fer

Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:

Command: change Select objects: 70,287 1 found

Select objects: 140,287 1 found, 2 total



Select objects: Specify change point or [Properties]: P Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA Enter new layer name <0>: fer Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:

Command: stretch Select objects to stretch by crossing-window or crossing-polygon...

Select objects: c Specify first corner: 0,20 Specify opposite corner: 210,0 2 found

Select objects: Specify base point or displacement: 0,0 Specify second point of displacement: 0,30

Command: e ERASE

Select objects: 140,40 1 found

Select objects:

Command: m MOVE


Select objects: Specify base point or displacement: 0,0 Specify second point of displacement or <use first point as displacement>: 0,-10

Command: stretch Select objects to stretch by crossing-window

or crossing-polygon...


Select objects: Specify base point or displacement:

0,145 Specify second point of displacement:

0,115

Command: stretch Select objects to stretch by crossing-window or crossing-polygon...


Select objects: Specify base point or displacement: 0,297 Specify second point of displacement: 0,267

Command: stretch

Select objects to stretch by crossing-window or crossing-polygon...

Select objects: c

Specify first corner: 0,180

Specify opposite corner: 210,130

2 found

Select objects:

Specify base point or displacement: 0,0

Specify second point of displacement: 0,30

Command: m MOVE

Select objects: W Specify first corner: 0,270 Specify opposite corner: 210,160 3 found

Select objects: Specify base point or displacement: 0,270 Specify second point of displacement or <use first point as displacement>: 0,250 Command: MOVE


Select objects: Specify base point or displacement: 0,50 Specify second point of displacement or <use first point as displacement>: 0,70


Enter an option

[?/Make/Set/New/ON/OFF/Color/Ltype/

LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF Enter name list of layer(s) to turn off: fer Enter an option


LWeight/Plot/Freeze/Thaw/LOck/Unlock]:

Command: m MOVE


Select objects: Specify base point or displacement: 0,0 Specify second point of displacement or

<use first point as displacement>: 10,0


Enter an option



OFF Enter name list of layer(s) to turn off:

hasuri,fer Enter an option



Command: l LINE Specify first point: 40,130 Specify next point or [Undo]: @5,0 Specify next point or [Undo]: Command: change Select objects: 42,130 1 found

Select objects: Specify change point or [Properties]: P Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LW Enter new lineweight <ByLayer>: 1 Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: Command: _leader Specify leader start point: 42.5,130 Specify next point: @0,-7 Specify next point or [Annotation/Format/Undo] <Annotation>: Enter first line of annotation text or <options>: Enter an annotation option [Tolerance/Copy/Block/None/Mtext] <Mtext>: N

Command: explode Select objects: c Specify first corner: 35,128 Specify opposite corner: 50,120 1 found

Select objects: Command: scale

Select objects: c

Specify first corner: 35,128

Specify opposite corner: 50,120

2 found

Select objects:

Specify base point: 42.5,130

Specify scale factor or [Reference]: 1.5

Command: -block Enter block name or [?]: estsh Specify insertion base point: 45,130 Select objects: W Specify first corner: 35,132 Specify opposite corner: 50,120 3 found

Select objects: Command: ucs Current ucs name: *WORLD*

Enter an option [New/Move/orthoGraphic/Prev/Restore/Save/Del/Apply/?/World]

<World>: N Specify origin of new UCS or [ZAxis/3point/OBject/Face/View/X/Y/Z] <0,0,0>:

42.5,130 Grid too dense to display


Command: ucsicon Enter an option [ON/OFF/All/Noorigin/ORigin] <ON>: OR

Command: -attdef Current attribute modes: Invisible=N Constant=N Verify=N Preset=N

Enter an option to change [Invisible/Constant/Verify/Preset] <done>: Enter attribute tag name: ts Enter attribute prompt: Majuscula Enter default attribute value: A Current text style: "a508" Text height: 5.0000

Specify start point of text or [Justify/Style]: -8,-8 Specify rotation angle of text <0>: Command: -block Enter block name or [?]: esh Specify insertion base point: 2.5,0 Select objects: w Specify first corner: -10,10 Specify opposite corner: 10,-15 4 found

Select objects:

Command: -insert Enter block name or [?] <estsh>: esh Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>: Enter attribute values

Majuscula <A>: A

Command: -insert Enter block name or [?] <esh>: rug Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: _nea to

Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>:

Command: -insert Enter block name or [?] <rug>: Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: nea to

Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>: 90 Enter attribute values

Rugozitatea <Ra>: Ra3,2

Command: -insert Enter block name or [?] <rug>: Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: nea to

Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>: 180 Enter attribute values

Rugozitatea <Ra>: Ra12,5

Command: -attedit Edit attributes one at a time? [Yes/No] <Y>: Enter block name specification <*>: Enter attribute tag specification <*>: Enter attribute value specification <*>: Select Attributes: 1 found

Select Attributes: �1 attributes selected.

Enter an option [Value/Position/Height/

Angle/Style/Layer/Color/Next] <N>: A Specify new rotation angle <180>: 0 Enter an option [Value/Position/Height/

Angle/Style/Layer/Color/Next] <N>: P Specify new text insertion point

<no change>: @-10,-5 Enter an option [Value/Position/Height/

Angle/Style/Layer/Color/Next] <N>:

command: 3darray select objects: 1 found select objects:

Documents

mspace command

h regenerating model

r regenerating model

v regenerating model

b regenerating model

si regenerating model

regenerating layout

model space limits