colpak 13 april final ok -...

ColpakChromatography Consumables

www.colpak.co.in

a

Colpak Tel. +91.22.6520.8849/[email protected] Fax. +91.22.2204.5352

About Us

Chromatography Division of Top Syringe Mfg. Co. Pvt. Ltd.; Mumbai, India. ISO 9001:2008 & ISO 13485 Certified

Established in 1964, we have been in the field of Glass Tube Engineering making glass syringes from 1/4ml to 100ml. Over the years we have made a number of products in glass tube engineering like Test Tubes, Heamometers, and our prestigious product Sterile Glass Prefillable Syringes made at our plant in Alandi, Pune where we have experience in handling a combination of products such as glass, elastomers (rubber) & plastic.

Having this experience, we have now diversified into manufacturing of Chromatography Consumables which use the same product knowledge at our plant on the outskirts of Mumbai city. With experience in providing quality material since nearly over 5 decades, we offer the laboratory market with world class products.

We look forward to working with you for your closure technique needs in the laboratory.

Kirit Shandilya[Chairman]

Contents

Products Page

ND11 Crimp Neck Vials

ND9 Short Thread Vials

ND11 Snap Ring Vials

ND8 Screw Neck Vials

ND13 Screw Neck Vials

ND20 Headspace Vials

Micro Volume Inserts

Shell Vials

Vials Rack

3

4

6

6

7

7

8

5

5

Technical Specification

Correct Septa Selection

Compatibility Chart

Cross Reference Chart

Product Index

9

11

12

14

15

Crimp Neck

16

17

17

19

19

Test Tube

Glass Syringes

SPE Column Blanks

Lab Refregerator

Pipettes

2

11mm Septas

TC-112 A

TC-112 B

TC-112 C

TC-112 D

TC-112 E

TC-112 F

TC-112 G

Catalog No. Description

Silicone White / PTFE Red Thickness 1mm, Temperature Resistant -60°C to 200°C,

PTFE Red / Silicone White / PTFE Red Septa, Thickness 1mm, Temperature Resistant -60°C to 200°C

Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C

Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C

Pre-Slit Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C

Pre-Slit Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C

Pre-Slit PTFE Red, Silicone White / Thickness 1mm, Temperature Resistant -60°C to 200°C

100

Packing

100

100

100

100

100

100

* Blue, Red, Green & Gold Caps Available on request.

TC-117 B

TC-117 C

TC-117 A Aluminium Cap Clear 5.5mm Center Hole Silicone White / PTFE Red

Aluminium Cap Clear 5.5mm Center Hole PTFE Red / Silicone White / PTFE Red

Aluminium Cap Clear 5.5mm Center Hole Silicone Red / PTFE White

TC-117 Aluminium Cap 5.5mm Center Hole

TC-117 F

TC-117 G

Aluminium Cap Clear 5.5mm Center Hole Pre-Slit Silicone Red / PTFE White

Aluminium Cap Clear 5.5mm Center Hole Pre-Slit Silicone White /PTFE Red

100

100

100

100

100

100

11mm Aluminium Septas & CapsCatalog No. Description Packing



Why Select 11mm Crimp Neck Vials?

Crimp caps provide the tightest seal, reducing the chance of sample evaporation. The 12x32mm crimp vials and 11mm aluminium crimp caps are economical and easy to use with crimping tools.

ND11 Crimp Neck Vials 12 x 32mm

TC-60 B

TC-60 A

1000

Packing

TC-60 D 1000


1000

Packing

TC-60 C 1000

0.2ml Micro-Insert, 31 x 6mm, Clear Glass, , Flat Bottom, Fill Vol. 0.351st Hydrol Class

0.1ml Micro-Insert, 31 x 6mm, Clear Glass, , Conical, 12mm Top, Fill Vol. 0.30 (Coming Soon)1st Hydrol Class

0.1ml Micro-Insert, 31 x 6mm, Clear Glass, , Conical, 15mm Top, Fill Vol. 0.25 1st Hydrol Class (Coming Soon)

0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass, , Mandrel Point with assembled Plastic Spring, Fill Vol. 0.20 (Coming Soon)

1st Hydrol Class

Micro-Inserts for 11mm Crimp Neck Vials

11mm Crimp Neck Vials

TC-110 A

TC-110 B


12 x 32mm, Clear Glass, , Wide Opening1st Hydrol Class

12 x 32mm, 1st Hydrol ClassClear Glass, , Wide Opening, Label + Filling Lines

100

Packing

100

100

100

100

100

TC-110 C 12 x 32mm, USP Type 1Amber Glass, Wide Opening,

TC-110 D 12 x 32mm, 1st Hydrol Class, Label + Filling lines, USP Type 1Amber Glass, Wide Opening,

TC-110 AER

TC-110 BER

12 x 32mm, Clear Glass, Wide Opening, USP Type 1 Expansion 33

12 x 32mm, Clear Glass, Wide Opening, Label + Filling lines, USP Type 1 Expansion 33

TC-110 A TC-110 B TC-110 D TC 60 A TC 60 B TC 60 C TC 60 D11mm AluminumSeptas & Caps

#For correct vial crimping visit page no 9

3

ND9 Short Screw Thread Vials 12 x 32mm



* Transparent, Red, Green, Black & Yellow Caps Available on request.

TC-94 BB

TC-94 BC

TC-94 BD

TC-94 BE

TC-94 BF

TC-94 BG

TC-94 BA PP Blue 6mm Center Hole Silicone White / PTFE RedKnurled Short Screw Thread Cap,

PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole PTFE Red / Silicone White / PTFE Red

PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White

PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue

PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue with Pre-Slit

PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White with Pre-Slit

PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole PTFE RedSilicone White / with Pre-Slit

TC-94 B PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole

100

100

100

100

100

100

100

100

9mm Short Screw Thread Septas & Caps

TC-92 A

TC-92 B

TC-92 C

TC-92 D

TC-92 E

TC-92 F

TC-92 G


Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C 200 C to °

PTFE Red / Silicone White / PTFE red, Thickness 1mm, Temperature Resistant -60°C to 200°C

Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C

Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C

Pre-Slit Silicon White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C

Pre-Slit Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C

Pre-Slit PTFE Red, Silicone White / Thickness 1mm, Temperature Resistant -60°C to 200°C

100

Packing

100

100

100

100

100

100

Why Select 9mm Short Screw Thread Vials?

9mm screw thread vials have a 9-425 GPI thread and the closure is dimensionally equivalent to 11mm crimp cap vials.This means that they can be used in any autosampler that uses 11mm crimp cap vials. 9mm screw caps have an advantage over 11mm crimp caps because 9mm screw caps can easily be applied and removed by hand and they can be reused.

9mm Short Screw Thread Vials, Wide Opening

TC-90 A

TC-90 B

TC-90 AER

TC-90 BER

TC-90 C

TC-91 ERB



12 x 32mm, 1st Hydrol ClassClear Glass, , Wide Opening, Label + Filling Lines

12 x 32mm, Clear Glass, Wide Opening,l, USP Type 1 Expansion 33

12 x 32mm, Clear Glass, Wide Opening ,Label + Filling lines, USP Type 1 Expansion 33

12 x 32mm, 1st Hydrol Class, Amber Glass, Wide Opening

12 x 32mm, PP 9mm Micro-Vial, Transparent

100

Packing

100

100

100

100

100

100

TC-90 D 12 x 32mm, 1st Hydrol Class, Wide Opening , Label + Filling Lines USP Type 1Amber Glass,

TC-90 A TC-90 B TC-90 D TC-91 ERB9mm Short Screw Threads Septas & Caps

#For correct vial sealing screw cap visit page no 9

4



9mm Short Screw Thread Septas & Caps

TC-96 BB

TC-96 BC

TC-96 BD

TC-96 BE

TC-96 BF

TC-96 BG

TC-96 BA PP Blue 6mm Center Hole Silicone White / PTFE RedShort Screw Thread Cap,

PP Blue Short Screw Thread Cap, 6mm Center Hole PTFE Red / Silicone White / PTFE Red

PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White

PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue

PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue with Pre-Slit

PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White with Pre-Slit

PP Blue Short Screw Thread Cap, 6mm Center Hole PTFE RedSilicone White / with Pre-Slit

TC-96 B PP Blue Short Screw Thread Cap, 6mm Center Hole

100

100

100

100

100

100

100

100

* Transparent, Red, Green, Black & Yellow Caps Available on request.

Catalog No. Description Packing

TC-95 BA PP Blue Short Screw Thread Cap, 6mm Closed Top, Silicone White / PTFE Red

TC-95 B PP Blue Short Screw Thread Cap, 6mm Closed Top

100

100

TC-60 B

TC-60 A

1000

Packing

TC-60 D 1000


1000

Packing

TC-60 C 1000

0.2ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Flat Bottom, Fill Vol. 0.35

0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Conical, 12mm Top, Fill Vol. 0.30(Coming Soon)

0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Conical, 15mm Top, Fill Vol. 0.25(Coming Soon)

0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass, 1st Hydrolic Glass, Mandrel Point with assembled Plastic Spring, Fill Vol. 0.20(Coming Soon)

Micro-Inserts for 9mm Short Screw Thread Vials

1ml Shell Vials Micro-Inserts

TC-712 B

TC-712 A 40mm x 8.2mm, 1ml Shell Vial, Clear Glass, 1st Hydrol Class

8mm PE-Plug, Transparent (Without Insertion Barrier)

TC-71240mm x 8.2mm, 1ml Shell Vials, Clear Glass, 1st Hydrol Class, 8mm PE-Plug, Soft without insertion barrier for Micro-Insert

Packing


1000

Packing

1000

1000

Shell Vials

Shell vials feature thicker walls for safer sample handling. They are compatible with Waters WISP™ 48 and 96 style autosamplers. All shell vials are supplied with polyethylene plug closures – their tear-away design ensures excellent penetration and ventilation during sampling.

Why Select Shell Vials?

TC-70


PP Vial Rack 182 x 92 x 16mm, 50 cavities with 12mm diameter 1

Packing

TC-712 TC 70

Vials Rack

9mm Short Screw Threads Septas & Caps

TC 60 A TC 60 B TC 60 C TC 60 D

#For correct vial sealing screw cap visit page no 9

5



PP 8mm Screw Seals

TC-80 A

TC-80 B

TC-80 C

TC-80 D


12 x 32mm, 1st Hydrol Class Clear Glass, Small Opening

12 x 32mm,1st Hydrol Class Label + Filling LinesClear Glass, Small Opening ,

12 x 32mm, Amber Glass, Small Opening , USP Type 1

12 x 32mm, Label + Filling LinesAmber Glass, Small Opening, , USP Type 1

100

Packing

100

100

100

8mm Screw Neck Vials

ND8 Screw Neck Vials 12 x 32mm

Why Select 8mm Screw Neck Vials?

8mm (8-425) screw neck vials are the original smaller opening autosampler vials. They are designed to work in a variety of autosamplers requiring narrow neck vials.

11mm Snap Ring Seals

11mm Snap Ring Vials

TC-110 SA

TC-110 SB

TC-110 SD

TC-110 SC



12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening, Label + Filling Lines

12 x 32mm, Ambe 1st Hydrol Class, Wide Opening, Label + Filling Linesr Glass,

12 x 32mm, Amber Glass, Wide Opening, USP Type 1

100

Packing

100

100

100

Why Select 11mm Snap Ring Vials?11mm snap caps provide a secure seal that minimises evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be closed with either snap caps or crimp caps.

ND11 Snap Ring Vials 12 x 32mm

TC-110 SB TC-110 SDTC-110 SA TC-80 A TC-80 B11mm SnapRing Septas & Caps

8mm ScrewSeptas & Caps

TC-110 SG

TC-110 SH


PP Clear 6mm Snap Ring Cap, PTFE RedSilicone White / 100

Packing

100PP Clear 6mm Snap Ring Cap, Pre-Slit PTFE RedSilicone White /

TC-110 SI 100PP Clear 6mm Snap Ring Closed Cap with Star Membrane

100TC-84 K PP 8mm Black Knurled Screw Cap, 5.5mm Center Hole Cap


100TC-84 KAPP 8mm Black Knurled Screw Cap, 5.5mm Center Hole PTFE Red Thickness 1.5mm, Temperature Resistant -60°C to 200°C

Silicone White / ,

* Transparent, Red, Green & Yellow Caps Available on request. #For correct vial sealing screw cap visit page no 12

6

13mm Screw Neck Vials, Wide Opening

TC-130 A

TC-130 B

TC-130 C

TC-130 D


4ml x 45mm, Clear Glass, 15 1st Hydrol Class

4ml Clear Glass, 15 x 45mm, 1st Hydrol Class, Label + Filling Lines

4ml Amber Glass 15 x 45mm, 1st Hydrol Class

4ml Amber Glass 15 x 45mm, 1st Hydrol Class, Label + Filling lines

100

Packing

100

100

100

13mm Screw Seals


100

Packing

TC-136 KAPP Black Screw Cap 8.5mm Center Hole, 1.5mm Thickness, Temperature Resistant -60°C to 200°C

Silicone White / PTFE Red,



ND13 Screw Neck Vials 15 x 45mm

Why Select 13mm Screw Neck Vials?

13mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. They are used by the Waters 48-position autosampler and many others.

Why Select Headspace Vials?

Colpak high quality headspace vials have a bevelled neck for a secure seal, uniform glass thickness for even heat distribution and a stable, strong design for ease of use. They are available with rounded or flat bottom profiles for accurate instrument compatibility. Use with the 20mm headspace caps, septas and seals.

TC-200

TC-200 A


22.5 x 46mm, 10ml Crimp Headspace Clear Vial, Flat Bottom

22.5 x 75.5mm 20ml Crimp Headspace Clear Vial, Flat Bottom

100

Packing

100

20mm Septas & CapsCatalog No. Description

100

Packing

Silicone White / , PTFE Beige Thickness 3mm, Temperature Resistant -60°C to 200°C

100TC-202 J Silicone White / PTFE White, Thickness 3mm, Temperature Resistant -60°C to 200°C

10010mm Center Hole, Blue Crimp Top, Magnetic Aluminum Cap

10010mm Center Hole, Crimp Top, Aluminum Cap

TC-202 H

TC-204

TC-206

100

100

10mm Center Hole, Crimp Top, Aluminium Cap with Silicone White / PTFE Beige

TC-206 J

TC-206 H

10mm Center Hole, Crimp Top, Aluminum Cap with Silicone White / PTFE White

ND20 Headspace Vials

20mm Headspace Vials

TC- 200 A

20mm Aluminum Septas & Caps

TC-130 A TC-130 B TC-130 D 20mm Magnetic Aluminum Septas & Cap

13mm ScrewSeptas & Caps

TC- 200

7



Limited Volume Inserts

Bottom Type

Flat Conical Mandrel

Insert Selection Guide

SolventCompatibility

Glass is most commonly used for vial inserts. Polypropylene may be necessary when using pH sensitive samples.

Targeted DeadVolume

Mandrel point inserts provide the smallest dead volume so are suitable when minimising sample loss is important. Conical bottom inserts provide suffi cient sample extraction for Most applications.

Price

Flat bottom inserts are the cheapest and may be a viable option for limited sampling. Mandrel point vial inserts are the most expensive but they minimise sample loss and provide excellent Injection accuracy.

Limited volume inserts are an economical solution in sample analysis to reduce the use and waste of solvents and small samples. For optimum instrument performance and accurate test results, use the guides below to ensure that the correct insert is used with the appropriate autosampler vial. The Insert is neckless and always has to be used within a vial. The diameter of the Insert depends on the size of the vial opening. Inserts reduces the volume, so that the needle is capable of picking up even smallest sample quantities. The larger the top of an insert, the more the volume can be reduce.

Why Select Limited volume Inserts?

TC 50 A TC 50 B TC 50 C TC 50 D TC 60 A TC 60 B TC 60 C TC 60 D

TC-50 C

TC-50 A0.2ml Micro-Insert, 31 x 5mm, Clear Glass, , Flat Bottom, Fill Vol. 0.30

1st Hydrol Class


TC-50 B0.1ml Micro-Insert, 31 x 5mm, Clear Glass, , Conical, 9mm Top, Fill Vol. 0.20 (Coming Soon)

1st Hydrol Class

0.1ml Micro-Insert, 31 x 5mm, Clear Glass, , Conical, 15mm Top, Fill Vol. 0.15 (Coming Soon)

1st Hydrol Class

TC-50 D 1000

0.1ml Micro-Insert, 29 x 5mm, Clear Glass, , Mandrel Point with assembled Plastic Spring,Fill Vol. 0.15 (Coming Soon)

1st Hydrol Class

1000

1000

1000

9mmScrew

11mmCrimp

TC-60 B

TC-60 A

TC-60 D

TC-60 C

0.2ml Micro-Insert, 31 x 6mm, Clear Glass, , Flat Bottom, Fill Vol. 0.35

1st Hydrol Class

0.1ml Micro-Insert, 31 x 6mm, Clear Glass, Conical, 12mm Top, Fill Vol. 0.30 (Coming Soon)

1st Hydrol Class,

0.1ml Micro-Insert, 31 x 6mm, Clear Glass, , Conical, 15mm Top, Fill Vol. 0.25 (Coming Soon)

1st Hydrol Class

0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass, , Mandrel Point with assembled Plastic Spring, Fill Vol. 0.20 (Coming Soon)

1st Hydrol Class

1000

1000

1000

1000

üü

ü ü

8mmScrew

ü

ü

11mmSnap

ü

ü

ü

ü

ü

ü ü

üü ü

8


Technical Specifications


Screw Thread Finish

GPI refers to the "Glass Packaging Institute"

The GPI is responsible for establishing and issuing standards for the types and finishes produced by American glass manufacturers.

For example, and 8-425 neck finish is approximately 8 mm in diameter across the outside of the threads. The 425 represents the finish (style of thread).

Typical GPI finishes found in the chromatography field are as follows:8-425 Closure - Varian, Shimadzu 10-425 Closure - Waters Alliance 2690 13-425 Closure - Waters 48 position WISP™, Shimadzu.

Note: The 9 mm thread finish does not appear in the GPI finishes. It is not a standard finish. The 9 mm closure and vial are used with Hewlett-Packard equipment.

"A" = Outer diameter of seal

"B" =Inside diameter of the thread

"ID" = Inside diameter

"D" =Distance from top of finish to shoulder for closure clearance

"C" =Start of thread

Standard Screw Thread Finish

Over-Tightened Screw Cap

Septum Distortion Sealing Screw Cap

When using any type of screw cap vial, care should be taken to ensure the cap is screwed on securely without being Unnecessarily over-tightened.

It is important not to over-tighten screw caps

ŸThe septum may distort as it is placed under pressure and twisted (see diagram)ŸSeptum resealing can be adversely affectedŸCoring may occur upon injectionŸThe cap may unscrew itself – this can result in sample evaporation

Over-tightening can cause various problems:

"A" = Outer diameter of seal

"B" = Crimp tool and robotic arm clearance

"ID" = Inside diameter

"D" = Distance from top to shoulder for crimp & robotic arm clearance

"C" = Crimp seal thickness

Standard Crimp Seal Finish

Correct Vial Crimping

A correctly crimped vial is neither over-crimped nor under-crimped. Over-crimping may cause coring or poor septum resealing, while under- crimping can cause evaporation problems.

With proper adjustment of the vial crimpers, Perfect crimping can be achieved every time. When the vial is crimped perfectly, the cap should not be able to rotate and the septum should appear smooth and level.

Achieve accurate results with correctly Crimped vials

Over-Crimped

Under-CrimpedCorrectly Crimped Vial

Target Hole

SealCap

SkirtCollar/Head

Neck

Wall

Tuck-Under

Shoulder

Screw Neck

AB

ID C

D

Crimp Neck

A

B

ID

C

D

9


Technical Specifications


Glass Technical Information

Terminology:

Borosilicate :A glass that is high in silicate and having at least 5% boron oxide.

Linear Coefficient of Expansion: Fractional change in length of glass per degree change in temperature. Strain Point - Maximum temperature to which glass should be heated during use.

USP Type - Pharmaceutical glass containers can be classified as USP Type I, II, III or NP.

Type I: Borosilicate glass represents the least reactive glass. Type I glass has the least pH shift. (Lowest leaching characteristics), Coefficient of Expansion = 33 or 51 for Clear and 51 for Amber.

Type II: De-alkalized soda lime glass with higher levels of sodium hydroxide and calcium oxide.

Type III: Soda lime glass - cannot be autoclaved.

Type NP: General purpose soda-lime glass used where chemical durability and heat shock are not factors. Coefficient of Expansion=92

Types of Glass:

Glass Properties

Colour

Linear Coefficient of Expansion

Strain Point (Degrees Celsius)

USP Class Type

Light Protection

33

515

Clear

51

Clear

535

Type 1

No

Type 1

No

51

Amber

535

Yes

Type 1

Plastic Properties

Translucent

Type of Plastic LDPE

Maximum. useTemperature C/F

Transparency

HDPE

Sterilization Autoclaving

Disinfectants Yes

Dry Heat

Radiatioin Yes

0.92Specification Gravity

Flexibility Rigid

0.95

Good

PP PMP

Clear

Yes

No

Clear

PS

No

80°C /176°F

120°C / 248°F

135°C / 275°F

175°C / 347°F

90°C / 194°F

Translucent Translucent

No No NoYesYes

YesYes

No No NoYesNo

Yes No Yes

0.90 0.83 1.05

Rigid Rigid Rigid

1

Glossary

PP Polypropylene:

2 PE Polyethylene:

3 PTFE Poly Tetra Flouro Ethylene:

4 ND Nominal Diameter:

10

Type 51 is clear or amber borosilicate glass referred to as Type 1, Class B-51 Expansion

Comparatively low coefficient of expansion

All round good chemicalcompatibility

Good resistance to heat shock

Higher metal content

All amber vials are made from Type 1, Class B-51 expansion glass

Amber glass is to be used for a light sensitive samples; however, if left out in daylight for extended periods of time the amber coloring will fade and become less efficient

Type 33 is clear borosilicate glass referred to as Type 1, Class A-33 Expansion

This is the lowest coefficient of expansion

Highly resistant to chemical attack

Total arsenic and antimony oxides are less than 0.05%

Free of the elements of the calcium, magnesium and zinc group of heavy metals

Not available as amber glass

5 GC Gas Chromatography:

6 :

7 1st Hydrol Class Type 1 glass:

HPLC High Pressure Liquid Chromatography



Selecting the correct SEPTAThe selection of correct septa depends on the application. Almost all septa are laminated on one side with PTFE, which has a high chemical resistance and forms an inert barrier between samples and carrier material of the septa. The carrier materials have different physical and chemical properties, such as temperature resistance, reseal-ability properties, cleanliness, hardness, thickness, etc.

The individual conditions of the user’s application aim at the specific characteristics of the carrier material, e.g.:

11

Poor :Post injection this septa will exhibit sample loss and deterioration

Septa Compatibility Post Injection

Fair :Post injection this septa will maintain integrity for a limited period of time with some deterioration

Good :Post injection this septa will maintain integrity for an extended period of time minor deterioration

Excellent :Post injection this septa will maintain integrity for high percentage of analytical sample analysis with absolute minimal deterioration

Chemical Rubber Silicone Butyl Rubber Viton

Acids Excellent

Halogenated Hydrocarbons

Good Fair Poor

Acids, diluted GoodGood Fair Poor

Acetone PoorGood Good Poor

Alcohols GoodFair Good -

Benzene FairPoor Poor Good

Chloroform Fair

Dioxane Poor

Ethyl Acetate ExcellentGood Fair Poor

Ethyl Alcohol Excellent Good Fair

Excellent

Poor Good Good

Fair Good Poor

-

-PoorPoor

Hexane

Ketones

Methanol

Pentane

Sulphuric Acid

Sufactants

Toluene

Water

Poor

Excellent

Good

Poor

Fair

Excellent

Fair

Excellent

Good

Fair

Excellent

Good

Good

Excellent

Good

Excellent

Poor

Good

Good

Poor

Poor

Fair

Poor

Good Good

Excellent

-

Good

-

Poor

-

-

PTFE

Exceptional solvent resistance with superior chemical inertness

Only suitable for single injection use – not recommended for sample storage before or after injection

Not resealable

The most economical septa

Maximum service temperature 260°C

PTFE / Silicone

Excellent resealing capabilities – highly recommended for multiple injections and sample storage

Autoclavable and excellent resistance to coring

PTFE chemical resistance until pierced then the septa will have the compatibility of silicone

Temperature range -40°C to 200°C, For thin Fragile needle

Pre-Slit PTFE / Silicone

Reduces the possibility of coring with blunt tipped needles or for applications using a thin gauge needle

Used to prevent vacuum from forming inside the vial

Temperature range -40°C to 200°C, For Blunt, thick needle

PTFE / Silicone / PTFE

Recommended for multiple injections due to above average resealing capabilities

Recommended for demanding applications such as internal standards, trace analysis or applications where there will be a long time between injections

Autoclavable and excellent resistance to coring

Temperature range -40°C to 200°C

PTFE / Red Rubber

The most economical septa used in routine analysis

Easy to pierce with moderate resealability

PTFE chemical resistance until pierced then the septa will have the compatibility of rubber

Not recommended when retaining samples for further analysis or for multiple injections

Temperature range -40°C to 110°C



ColpakAutosamplerCompatibility

Chart

TC-80 A

TC-80 B

TC-80 C

TC-80 D

TC-90 A TC-90 B

TC-90 C

TC-90 AER

TC-91 ERB

TC-90 BER

TC-90 D

TC-110 A

TC-110 B

TC-110 C

TC-110 AER

TC-110 BER

TC-110 D

TC-110 SA

TC-110 SB

TC-110 SC

TC-110 SD

TC-130 A

TC-130 B

TC-130 C

TC-130 D

TC-200

TC-200 A

9D

N daerh

T werc

S troh

S

8D

N kceN

wercS

11

DN kce

N pmir

C

11D

N gniR pa

nS

31D

N daerh

T werc

S troh

S

02D

N ecapsdaeH

slaiV lle

hS

TC-712

TC-712 A

TC-712 B

Agilent / HP

Alcott

Alltech

Beckman

Bruke

Carlo Erba/Fison

Dan

Dionex/Gynkote

¤¤¤

¤¤¤¤¤¤¤¤

¤

¤¤¤¤¤¤¤¤

¤

¤¤¤¤¤¤¤¤

¤¤

¤¤¤¤¤¤¤¤¤¤¤

¤

¤¤

¤¤¤

¤¤¤

¤¤¤

¤¤¤

¤¤

¤¤

¤¤

¤¤¤¤¤¤

¤¤¤¤¤¤

¤¤¤¤¤¤

¤

¤¤

¤

¤¤

¤¤¤

¤¤¤

¤¤¤

¤¤

¤¤

¤¤

¤¤¤

¤¤¤

¤¤¤

Dynatech/Precisio

¤ ¤ ¤ ¤¤

Gerstel ¤¤ ¤ ¤Gilson ¤

¤¤¤

¤

¤¤¤¤¤¤¤¤

¤¤¤¤¤¤¤¤

¤¤¤¤¤¤¤¤

¤¤¤¤¤¤¤¤

¤ ¤ ¤

Agilent / HP

Agilent / HP

Agilent / HP

Agilent / HP

Agilent / HP

Agilent / HP

Agilent / HP

Agilent / HP

Agilent / HP

Alcott

Alcott

Alltech

Beckman

Beckman

Beckman

Beckman

Beckman

Carlo Erba/Fison

Carlo Erba/Fison

Carlo Erba/Fison

Dan

Dan

Dan

Dionex/Gynkote

Dionex/Gynkote

Dynatech/Precisio

Gilson

Gilson

Gilson

Gilson

Gilson

Gilson

Gilson

Gilson

Gilson

Gilson

Gilson

Gilson

HTA ¤¤¤

¤¤¤

¤¤¤

¤¤¤

HTA

HTA

LDC

¤

¤

¤

¤

¤¤

¤¤ ¤ ¤ ¤

Jasc ¤Kontro

Kontro

Leap Technologie ¤¤¤¤¤¤

¤¤¤¤¤¤

¤¤¤¤¤¤

¤¤¤¤¤¤

¤ ¤ ¤ ¤

¤

Leap Technologie

Leap Technologie

Leap Technologie

Leap Technologie

Leap Technologie

Leap Technologie

Merck/Hitach ¤¤¤¤

¤¤¤¤¤

¤¤

¤¤

¤¤

¤¤

1050

1090

1100

6850

7670 A

7671 A

7673 Series

7683

7694 Headspace

All Other Model

718 AL

719 D

738

570

580

501

502

507

Marthon

Promis

Triathlon

LC 51

42 Vial Tray

AS 105

AS 800 / 8000

HS 850

ALS 39.80

ALS 86.80

HS 39.50

HS 86.50

Gina

ASI 100(2ml Tray)

42 Vail Tray

LC 2000

AS 509(2ml Tray)

MS 2

201

202

221

222

231/231XL

232/232XL

233XL

234

235

All Other Model

401

402

ASPEC

HT250D/HT280T

HT300A/HT310A

HT300L

All Models

MSI 660

All Other Model

Marathon

A200LC

CTC DI PAL

CTC Combi PAL

CTC A200E PAL

CTC HTS PAL

CTC A200S PAL

CTC LC Mini PAL

AS-2000

AS-4000

L7200

L725

L8800

LaChrom

¤

¤

Merck/Hitach

Merck/Hitach

Merck/Hitach

Merck/Hitach

Merck/Hitach

12



ColpakAutosamplerCompatibility

Chart

TC-80 A

TC-80 B

TC-80 C

TC-80 D

TC-90 A TC-90 B

TC-90 C

TC-90 AER

TC-91 ERB

TC-90 BER

TC-90 D

TC-110 A

TC-110 B

TC-110 C

TC-110 AER

TC-110 BER

TC-110 D

TC-110 SA

TC-110 SB

TC-110 SC

TC-110 SD

TC-130 A

TC-130 B

TC-130 C

TC-130 D

TC-200

TC-200 A

9D

N daerh

T werc

S troh

S

8D

N kceN

wercS

11

DN kce

N pmir

C

11D

N gniR pa

nS

31D

N daerh

T werc

S troh

S

02D

N ecapsdaeH

slaiV lle

hS

TC-712

TC-712 A

TC-712 B

Al-1

Auto System

Integral 4000

Perkin Elmer

ISS 100

ISS 200

Series 200

¤¤¤¤¤¤

¤¤¤¤¤¤

¤¤¤¤¤¤LC600 42 Vial Tray

¤ ¤ ¤ ¤

¤Perkin Elmer

Perkin Elmer

Perkin Elmer

Perkin Elmer

Perkin Elmer

Perkin Elmer

LKB 2157-010Pharmacia ¤ ¤ ¤ ¤AOC-14

AOC-1400

AOC-17

AOC-20i

AOC-20s

AOC-8B

LC-10A

SIL-2AS

SIL-6B

SIL-HTc

Shimadzu

SIL-9A

SIL-10A

SIL-HTa

¤¤¤¤

¤¤

¤¤¤¤

¤¤

¤

¤¤

¤

¤¤

¤¤

¤¤ ¤ ¤

¤¤¤¤

¤

¤¤

¤¤

¤

¤¤

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Shimadzu

Marathon

Midas

Promis

Spark Holland

SPH 125

Triathlon

¤¤¤¤

¤

¤

¤¤

¤¤

¤¤

¤¤

¤

¤

¤Spark Holland

Spark Holland

Spark Holland

Spark Holland

8875

8880

AS100/ 1000

Spectra-Physics/TS

AS300/ 3000

Spectra-System

¤¤¤

¤

¤¤¤¤¤¤

¤¤¤¤¤

Spectra-Physics/TS

Spectra-Physics/TS

Spectra-Physics/TS

Spectra-Physics/TS

AS800Thermo Ques

Midas

HS850

Trace GC2000+AS2000

¤¤

¤ ¤

¤

¤

¤

¤¤

¤

Thermo Ques

Thermo Ques

Thermo Ques

Thermo Ques Trace GC2000+HS2000

TSK-6080

Tosoh ¤¤ ¤ ¤

AS-8010 ¤ ¤¤Tosoh

4247

4710

LC-XP

Unicam

¤ ¤

¤¤¤

¤¤¤

¤¤¤

Unicam

Unicam

CombiPAL

CP-8400

CP-8410

Genesis

Maratho

ProStar 400

ProStar 410

ProStar 420

ProStar 430

Varian

Ultra GC/M

Vista

¤¤

¤

¤¤

¤

¤¤

¤

¤

¤

8035

8100

8200

8200 CX

9090

¤¤¤

¤¤¤¤¤

9095

¤

¤

¤

¤¤

9100

¤

¤

¤¤¤¤

¤

¤

¤

¤¤

¤¤

¤

¤

¤

¤

¤¤

¤

¤

¤

¤

¤¤

¤¤

¤¤¤

¤

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

Varian

2690Water ¤ ¤ ¤2710 Sample Manager ¤ ¤¤Water

48 Position ¤ ¤Water

96 Position ¤Water

Alliance ¤ ¤ ¤¤ ¤Water

Breeze ¤ ¤ ¤ ¤ ¤Water

710 ¤ ¤Water

712 ¤ ¤Water

715 ¤ ¤Water

717 ¤ ¤Water

13


Vial Cross Reference Chart


ColpakAgilent Varian Water Chromacol Finneran National Cronus La-Pha

Crimp Neck Vials 12 x 32mm

5181-3375

5182-0543

5181-3376

392611634 WAT094222

392611635 WAT094223

2-CV

2-CV(A) 3211M-1232A

32011-1232

32011M-1232

C4011-1

C4011-1W

C4011-2W

VZS-02CC-100

VZS-02CC-100

VZS-02CA-100

11 09 0356

11 09 0476

11 09 0477

TC-110 A

TC-110 B

TC-110 D

Snap/Crimp Cap Vials 12 x 32mm

5182-0544

5182-0546

5181-0545

WAT094219

WAT094220

2-RV

2-RV(A) 3211SM-1232A

32011S-1232

32011SM-1232

C4011-5

C4011-5W

C4011-6W

VZS-02SC-100

VZS-02SC-100

VZS-02SA-100

11 09 0627

11 09 0644

11 09 0645 TC-110 SD

TC-110 SA

TC-110 SB

8mm Screw Cap Vials 12 x 32mm

5183-4428

5183-4429

392611639

392611640

2-SV

2-SV(A)

32008-1232

32008M-1232

32008-1232A

32008M-1232A

C4013-1

C4013-2W

C4013-1W

C4013-2

VZS-0208C-100

VZS-0208C-100

VZS-0208A-100

VZS-0208A-100

11 09 0210

11 09 0419

11 09 0259

11 09 0382

TC-80 A

TC-80 B

TC-80 C

TC-80 D


5182-0714

5182-0715

5182-0716

39261165

392611654

186000273

186000848

2-SVW

2-SVW(A)

32009-1232

32009M-1232

32008-1232A

32009M-1232A

C4000-1

C4000-1W

C4000-2

C4000-2W

VZS-0209C-100

VZS-0209C-100

VZS-0209A-100

VZS-0209A-100

11 09 0500

11 09 0519

11 09 0520

TC-90 A

TC-90 B

TC-90 C

TC-90 D


5183-4448

5182-4450

186000840

186001135

4-SV

4-SV(A)

34013-1545

34013-1545A

C4015-1

C4015-11W

C4015-2

C4015-2W

VZS-0415C-100

VZS-0415C-100

VZS-0415A-100

VZS-0415A-100

13 09 0222

13 09 1335

13 09 0280

11 09 1136

TC-130 A

TC-130 B

TC-130 C

TC-130 D

20mm Headspace Vials

5182-0838

5182-0837

392611677

392611675 20-CV

310020-2346

320020-2375

C4020-10

C4020-20

VZH-10CF-100

VZH-20CF-100

20 09 0795

20 09 0796

TC-200

TC-200 A

1ml Shell Vials Micro-Inserts

WAT022479 1-NWV-C/200 9800-840(alt.)C4015-96/200(Alt.)

VKL-0103-GCC-250

08 14 1168 TC-712

TC-712 A

TC-712 B

14


Product Index


CatalogNo.

PageNo.

8

TC-80 A

TC-80 B

TC-80 C

TC-80 D

TC-84 K

TC-84 KA

TC-90 A

TC-90 B

TC-90 C

TC-90 D

TC-90 AER

TC-90 BER

TC-91 ERB

6

6

6

6

6

6

4

4

4

4

4

4

4

TC-50 A

TC-50 B

TC-50 C

TC-50 D

TC-60 A

TC-60 B

TC-60 C

TC-60 D

TC-70

8

8

8

3,5,8

3,5,8

3,5,8

3,5,8

5

CatalogNo.

PageNo.

TC-92 A

TC-92 B

TC- C92

TC- D92

TC- E92

TC- F92

TC- G92

TC-94 B

TC- A94 B

4

4

4

4

4

4

4

4

4

TC-94 BB

TC-94 BC

TC-94 BD

TC-94 BE

TC-94 BF

TC-94 BG

TC-95 B

TC- A95 B

TC-96 BB

TC-96 BC

TC-96 BD

TC-96 B

TC- A96 B

4

4

4

4

4

4

5

5

5

5

5

5

5

CatalogNo.

PageNo.

TC-96 BE

TC-96 BF

TC-96 BG

TC-110 A

TC- B110

TC- C110

TC- D110

TC- AER110

TC-110 BER

5

5

5

3

3

3

3

3

3

TC- SA110

TC- SB110

TC- SC110

TC-110 SG

TC-110 SH

TC- SD110

6

6

6

6

6

6

TC-112 A

TC- B112

TC- C112

TC- F112

TC-112 G

TC-117

3

3

3

3

3

3

TC-110 SI 6

CatalogNo.

PageNo.

TC-712

TC- A712

TC-712 B

TC-136 KA 7

TC-200

TC-200 A

TC-202 H

TC-202 J

TC-204

TC-206

TC-206 H

TC-206 J

7

7

7

7

7

7

7

7

5

5

5

TC-117 A

TC- B117

TC- C117

TC-117 F

TC-117 G

TC-130 A

TC-130 B

TC-130 C

TC-130 D

3

3

3

3

3

7

7

7

7

15



"TEST-IT" Brand Test Tube

Features

Grade I

Borosilicate Glass

33 Expansion

With Rim & Without Rim

Non-Sterile

As per ASTM (Europeon)Standard

Complies with IS 2618:2006

72 pcs

Made from 33 expansion Tubing of uniform thickness for better heat transfer & chemical resistance. Borosilicate hard glass grade I meets ASTM standards.Permanent white marking on test tube with Lot. No.Packed as per International standards of 72 pcs /box.

Available Sizes (With Rim/Without Rim)

Over FlowCapacity

Size

4ml

6ml

10ml

16ml

24ml

28ml

36ml

55ml

Catalog No.With Rim

6110075

6112075

6112100

6115125

6115150

6118150

6125100

6125150

Catalog No.Without Rim

6210075

6212075

6212100

6215125

6215150

6218150

6225100

6225150

10 x 75

12 x 75

12 x 100

15 x 125

15 x 150

18 x 150

25 x 100

25 x 150

Packing

72/100

72/100

72/100

72/100

72/100

72/100

72/100

72/100

Typical Packing of Test Tubes

16

Glass Syringes



Features

Syringes Cylinder made of 1st Hydrol Class

Syringes are made by an ISO 9001 & ISO 13485 certified company

Syringes metal luer lock tip meets the specification of the American National Standards for Medical Materials luer taper fitting performances ISO 594 (Earlier HIMA MD 70.1-1983)

Syringe cylinder plunger fit is leak proof and meets the requirements of Federal Specification GG-S-92 lb / A-A-54840 / ISO 7886

Syringes confirm to ISO 594/1; 595/2

Syringes offer clarity, physical strength, chemical inertness and safety that are assured with glass

The printing of graduation & Logos on the syringe is done by an in house developed ink which is permanently fused in to the glass. This accounts for a life time accuracy and legibility.

Syringe reinforced Flanges which is flat on two sides prevent the syringe from rolling

17

GlasSPE Brand SPE Column Blanks

Solid Phase Extraction (SPE) Empty Column Blanks, Cartridges, Cylinders Made of Borosilicate Glass USP Type 1

0.5ml

1ml

3ml

6ml

12ml

Capacity

10

Packing

20ml

35ml

60ml

100ml

10

10

10

10

10

10

10

10

Capacity Catalog No. Graduation Packing

2ml

5ml

10ml

20ml

30ml

01-05-02-05

01-08-02-06

01-09-02-07

01-10-02-08

01-11-02-08

0.2ml

0.5ml

1ml

2ml

2ml

10

10

10

10

10

50ml 01-13-02-10 5ml

10

1ml 04-04-02-01 0.01ml

10

100ml 01-15-02-10 5ml 10

20 ml

5 ml

10 ml

50 ml

100 ml

2 ml

1 ml

30 ml



Seed Germinator

Cooling Chamber

Heavy Duty Oven

Drying Oven

Water Still

All Glass Water Still

Water Bath

Shaker Water Bath

Hot Plate

Heating Mantles

Soxhlet Extraction Heater

Heating Cord

Melting Point Apparatus

Multicell Ageing Oven

Tray Dryers

Drum Heaters

Orbital ShakerIncubator

Lab Precision Oven BacteriologicalIncubator (G M P Model)

Vertical Lab Autoclave Vaccum OvenCircular

-20° C / -40° CDeep Freezer

with PLC

Lab Refrigeratorwith PLC

BOD Incubatorwith PLC

Stability / Photo Stability

with PLC

Walk inStability Chamber

Muffle FurnanceVacuum OvenRectangular

Constant Temperature Bath Cryo Bath

18

E-mail: [email protected] Also visit www.tempoinstruments.com

Brand Products



make Lab Refrigerators are made of double walled and triple at backside con-struction. Full view inner acrylic door & front door with gasket & lock. Motorized blower is fitted on the back side for uniform temperature.

STANDARD MODEL GMP MODEL

Temp. Range : 2°C to 8°CTemp. Accuracy : ± 0.5°CTemp. Uniformity : ± 2°CSupply : 230V, AC.

Technical Data

For more details please visit www.tempoinstruments.com

Fixed Volume Pipettes

Variable Volume Pipettes (Coming Soon)

Catalog No.Capacity

LitersInternal Dimension

H x W x D (cm)Trays

Outer DimensionH x W x D (cm)

TI-810 S/G

TI-811 S/G

TI-812 S/G

TI-813 S/G

TI-814 S/G

TI-815 S/G

TI-816 S/G

TI-817 S/G

TI-818 S/G

TI-819 S/G

TI-820 S/G

100

170

200

285

325

400

600

800

1000

1500 Double Door

2000 Double Door

50 x 50 x 40

70 x 60 x 40

60 x 60 x 60

80 x 60 x 60

90 x 60 x 60

110 x 60 x 60

125 x 70 x 70

125 x 80 x 80

157 x 80 x 80

146 x 150 x 69

146 x 150 x 92

113 x 71 x 91

133 x 81 x 91

123 x 81 x 111

146 x 81 x 111

156 x 81 x 111

176 x 81 x 111

191 x 91 x 121

193 x 91 x 121

225 x 101 x 131

241 x 171 x 120

241 x 171 x 143

3

5

10

2

2

2

4

5

10

3

3

Catalog No.Capacity

µlAccuracy

(%)Colour

Precision(CV%)

TI-FVP-A

TI-FVP-B

TI-FVP-C

TI-FVP-D

TI-FVP-E

TI-FVP-F

TI-FVP-G

TI-FVP-H

TI-FVP-I

TI-FVP-J

5

10

20

25

50

100

200

250

500

1000

±2.50 Ivory±2.20

±1.20

±1.00

±1.00

±0.60

±0.40

±0.80

±0.60

±0.30

±1.00

±2.00

±1.00

±1.00

±0.80

±0.60

±0.40

±0.40

±0.40

±0.30

Ivory

Ivory

Ivory

Orange

Blue

Orange

Orange

Blue

Blue

Inside S.S. 304 with mirror finish Outside mild steel powder coated.

Inside S.S. 316 with mirror finishOutside stainless steel 304 with dull buff finish.

Pipette (representation only)

make Pipettes are the best in class laboratory pipettes to provide high precision, accuracy and efficiency. It operates on an air displacement principle and uses datable, disposable tips.

19

Brand Lab Refrigerator

Brand Pipettes

Optionals

1) PLC for auto changeover 6) Scanner 4 or 8 point temperature scanner complete with sensors

2) Standby refrigeration system

7) Stainless steel rod trays3) Safety digital temperature controller

8) Mobile alert system4) Data logger

9) Security system (Door access)5) CFR 21 Part 11 compliance software

Notes



20

12

04

03

Contact:

Manufactured by

Top Syringe Mfg. Co. Pvt. Ltd.

Office:

10-11, Prospect Chamber Annexe,317-21, Dr. D.N. Road, Fort,Mumbai, 400 001.

Tel. +91.22.6520.8849/50Fax. +91.22.2204.5352

Works:

Top Syringe Compound, W. E. Highway, Pandurang wadi, Mira Road (East), Thane 401 104

Marketed by

Hyderabad Office:

H.No. 1-8-495/27, Vikhar Nagar,Prakash Nagar, Begumpet, Secunderabad

Email :- [email protected]

Top Syringe Compound, W. E. Highway, Pandurang wadi, Mira Road (East), Thane 401 104

Tempo Instruments Pvt. Ltd.

E-mail: [email protected]

Website: www.tempoinstruments.com

Sewa Medicals Ltd.E-mail: [email protected]

Website: www.sewamedicals.com

colpak 13 april final ok -...

Documents